From: Soren Brinkmann <soren.brinkmann@xilinx.com>
Date: Wed, 20 Aug 2014 15:56:57 +0000 (-0700)
Subject: ARM: zynq: DT: Fix Ethernet phy modes
X-Git-Tag: v3.18-rc1~119^2~17^2~8
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=da45581ea825d53a459a90deb48a50b99369502b;p=thirdparty%2Fkernel%2Flinux.git

ARM: zynq: DT: Fix Ethernet phy modes

The used PHYs should be qualified as 'rgmii-id' instead of just 'rgmii'.
For the Zed board this seems to make a difference between working and
broken Ethernet.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index b29e0f97e764d..1a50f9f8d2956 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -44,7 +44,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 4cc9913078cd6..3d9cb023e1582 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 82d7ef1a9a9c6..42deb1b7dbc87 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -32,7 +32,7 @@
 
 &gem0 {
 	status = "okay";
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 };
 
 &sdhci0 {