From: Guoniu Zhou <guoniu.zhou@nxp.com>
Date: Fri, 27 Mar 2026 07:11:05 +0000 (+0800)
Subject: arm64: dts: imx8ulp: Add CSI and ISI Nodes
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=dad7f95a1529f7a2b563d3e052968a0fc174b8e1;p=thirdparty%2Flinux.git

arm64: dts: imx8ulp: Add CSI and ISI Nodes

The CSI-2 in the i.MX8ULP is almost identical to the version present
in the i.MX8QXP/QM and is routed to the ISI. Add both the ISI and CSI
nodes and mark them as disabled by default since capture is dependent
on an attached camera.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 1de3ad60c6aa..17caf3703fb1 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -858,6 +858,72 @@
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
+
+			isi: isi@2dac0000 {
+				compatible = "fsl,imx8ulp-isi";
+				reg = <0x2dac0000 0x10000>;
+				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pcc5 IMX8ULP_CLK_ISI>,
+					 <&cgc2 IMX8ULP_CLK_LPAV_AXI_DIV>;
+				clock-names = "axi", "apb";
+				power-domains = <&scmi_devpd IMX8ULP_PD_ISI>;
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						isi_in: endpoint {
+							remote-endpoint = <&mipi_csi_out>;
+						};
+					};
+				};
+			};
+
+			mipi_csi: csi@2daf0000 {
+				compatible = "fsl,imx8ulp-mipi-csi2";
+				reg = <0x2daf0000 0x10000>,
+				      <0x2dad0000 0x10000>;
+				clocks = <&pcc5 IMX8ULP_CLK_CSI>,
+					 <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
+					 <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
+					 <&pcc5 IMX8ULP_CLK_CSI_REGS>;
+				clock-names = "core", "esc", "ui", "pclk";
+				assigned-clocks = <&pcc5 IMX8ULP_CLK_CSI>,
+						  <&pcc5 IMX8ULP_CLK_CSI_CLK_ESC>,
+						  <&pcc5 IMX8ULP_CLK_CSI_CLK_UI>,
+						  <&pcc5 IMX8ULP_CLK_CSI_REGS>;
+				assigned-clock-parents = <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV1>,
+							 <&cgc2 IMX8ULP_CLK_PLL4_PFD1_DIV2>,
+							 <&cgc2 IMX8ULP_CLK_PLL4_PFD0_DIV1>;
+				assigned-clock-rates = <200000000>,
+						       <80000000>,
+						       <100000000>,
+						       <79200000>;
+				power-domains = <&scmi_devpd IMX8ULP_PD_MIPI_CSI>;
+				resets = <&pcc5 5>,	/* PCC5_CSI_REGS_SWRST */
+					 <&pcc5 6>;	/* PCC5_CSI_SWRST> */
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mipi_csi_out: endpoint {
+							remote-endpoint = <&isi_in>;
+						};
+					};
+				};
+			};
 		};
 
 		gpiod: gpio@2e200000 {