From: Francesco Lavra Date: Mon, 30 Mar 2026 16:19:14 +0000 (+0200) Subject: pinctrl: mcp23s08: Disable all pin interrupts during probe X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=db5b8cecbdf479ad13156af750377e5b43853fab;p=thirdparty%2Fkernel%2Flinux.git pinctrl: mcp23s08: Disable all pin interrupts during probe A chip being probed may have the interrupt-on-change feature enabled on some of its pins, for example after a reboot. This can cause the chip to generate interrupts for pins that don't have a registered nested handler, which leads to a kernel crash such as below: [ 7.928897] Unable to handle kernel read from unreadable memory at virtual address 00000000000000ac [ 7.932314] Mem abort info: [ 7.935081] ESR = 0x0000000096000004 [ 7.938808] EC = 0x25: DABT (current EL), IL = 32 bits [ 7.944094] SET = 0, FnV = 0 [ 7.947127] EA = 0, S1PTW = 0 [ 7.950247] FSC = 0x04: level 0 translation fault [ 7.955101] Data abort info: [ 7.957961] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 7.963421] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 7.968447] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 7.973734] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000089b7000 [ 7.980148] [00000000000000ac] pgd=0000000000000000, p4d=0000000000000000 [ 7.986913] Internal error: Oops: 0000000096000004 [#1] SMP [ 7.992545] Modules linked in: [ 8.073678] CPU: 0 UID: 0 PID: 81 Comm: irq/18-4-0025 Not tainted 7.0.0-rc6-gd2b5a1f931c8-dirty #199 [ 8.073689] Hardware name: Khadas VIM3 (DT) [ 8.073692] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 8.094639] pc : _raw_spin_lock_irq+0x40/0x80 [ 8.098970] lr : handle_nested_irq+0x2c/0x168 [ 8.098979] sp : ffff800082b2bd20 [ 8.106599] x29: ffff800082b2bd20 x28: ffff800080107920 x27: ffff800080104d88 [ 8.106611] x26: ffff000003298080 x25: 0000000000000001 x24: 000000000000ff00 [ 8.113707] x23: 0000000000000001 x22: 0000000000000000 x21: 000000000000000e [ 8.120850] x20: 0000000000000000 x19: 00000000000000ac x18: 0000000000000000 [ 8.135046] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 8.135062] x14: ffff800081567ea8 x13: ffffffffffffffff x12: 0000000000000000 [ 8.135070] x11: 00000000000000c0 x10: 0000000000000b60 x9 : ffff800080109e0c [ 8.135078] x8 : 1fffe0000069dbc1 x7 : 0000000000000001 x6 : ffff0000034ede00 [ 8.135086] x5 : 0000000000000000 x4 : ffff0000034ede08 x3 : 0000000000000001 [ 8.163460] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 00000000000000ac [ 8.170560] Call trace: [ 8.180094] _raw_spin_lock_irq+0x40/0x80 (P) [ 8.184443] mcp23s08_irq+0x248/0x358 [ 8.184462] irq_thread_fn+0x34/0xb8 [ 8.184470] irq_thread+0x1a4/0x310 [ 8.195093] kthread+0x13c/0x150 [ 8.198309] ret_from_fork+0x10/0x20 [ 8.201850] Code: d65f03c0 d2800002 52800023 f9800011 (885ffc01) [ 8.207931] ---[ end trace 0000000000000000 ]--- This issue has always been present, but has been latent until commit "f9f4fda15e72" ("pinctrl: mcp23s08: init reg_defaults from HW at probe and switch cache type"), which correctly removed reg_defaults from the regmap and as a side effect changed the behavior of the interrupt handler so that the real value of the MCP_GPINTEN register is now being read from the chip instead of using a bogus 0 default value; a non-zero value for this register can trigger the invocation of a nested handler which may not exist (yet). Fix this issue by disabling all pin interrupts during initialization. Fixes: f9f4fda15e72 ("pinctrl: mcp23s08: init reg_defaults from HW at probe and switch cache type") Signed-off-by: Francesco Lavra Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/pinctrl-mcp23s08.c b/drivers/pinctrl/pinctrl-mcp23s08.c index 586f2f67c617..b89b3169e8be 100644 --- a/drivers/pinctrl/pinctrl-mcp23s08.c +++ b/drivers/pinctrl/pinctrl-mcp23s08.c @@ -664,6 +664,15 @@ int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev, if (mcp->irq && mcp->irq_controller) { struct gpio_irq_chip *girq = &mcp->chip.irq; + /* + * Disable all pin interrupts, to prevent the interrupt handler from + * calling nested handlers for any currently-enabled interrupts that + * do not (yet) have an actual handler. + */ + ret = mcp_write(mcp, MCP_GPINTEN, 0); + if (ret < 0) + return dev_err_probe(dev, ret, "can't disable interrupts\n"); + gpio_irq_chip_set_chip(girq, &mcp23s08_irq_chip); /* This will let us handle the parent IRQ in the driver */ girq->parent_handler = NULL;