From: Luca Weiss Date: Tue, 17 Jun 2025 08:26:35 +0000 (+0200) Subject: dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=db9f3e3ff9347a233a17eadefae9c1b29ec8f3ed;p=thirdparty%2Fkernel%2Flinux.git dt-bindings: phy: qcom,snps-eusb2-repeater: Remove default tuning values The reset default tuning value depends on the PMIC, so remove them from the doc since they're not accurate for all PMICs. Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20250617-eusb2-repeater-tuning-v2-1-ed6c484f18ee@fairphone.com Signed-off-by: Vinod Koul --- diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml index d16a543a78488..27f064a71c9fb 100644 --- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -39,21 +39,18 @@ properties: description: High-Speed disconnect threshold minimum: 0 maximum: 7 - default: 0 qcom,tune-usb2-amplitude: $ref: /schemas/types.yaml#/definitions/uint8 description: High-Speed transmit amplitude minimum: 0 maximum: 15 - default: 8 qcom,tune-usb2-preem: $ref: /schemas/types.yaml#/definitions/uint8 description: High-Speed TX pre-emphasis tuning minimum: 0 maximum: 7 - default: 5 required: - compatible