From: Markus Stockhausen Date: Sun, 25 Jan 2026 17:19:44 +0000 (+0100) Subject: realtek: mdio: rename main mdio bus X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=dd7e88461e10aa70fec3945924e57d3539ef1c57;p=thirdparty%2Fopenwrt.git realtek: mdio: rename main mdio bus Looking at the Realtek mdio busses there are curently the following root@OpenWrt:~# mdio 1b000000.switchcore:mdio-controller-mii fixed-0 realtek-aux-mdio realtek-serdes-mdio rtldsa_mdio-0 The main mdio bus for the phys is named after the dts node it belongs to (1b000000.switchcore:mdio-controller-mii). As it is attached to the controller node it is even more confusing. Align the naming to the other busses and use "realtek-mdio". Signed-off-by: Markus Stockhausen Link: https://github.com/openwrt/openwrt/pull/21702 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/realtek/files-6.12/drivers/net/mdio/mdio-realtek-otto.c b/target/linux/realtek/files-6.12/drivers/net/mdio/mdio-realtek-otto.c index e4a7ef49a36..8916d777661 100644 --- a/target/linux/realtek/files-6.12/drivers/net/mdio/mdio-realtek-otto.c +++ b/target/linux/realtek/files-6.12/drivers/net/mdio/mdio-realtek-otto.c @@ -960,7 +960,7 @@ static int rtmdio_probe(struct platform_device *pdev) bus->write_c45 = rtmdio_write_c45; bus->parent = dev; bus->phy_mask = ~0; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev)); + snprintf(bus->id, MII_BUS_ID_SIZE, "realtek-mdio"); device_set_node(&bus->dev, of_fwnode_handle(dev->of_node)); ret = devm_mdiobus_register(dev, bus);