From: Jaroslav Kysela <perex@perex.cz>
Date: Wed, 14 May 2014 16:16:47 +0000 (+0200)
Subject: SAT>IP: Add new options to the help text
X-Git-Tag: v4.1~2093
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=de8d533e516bdb90737abbe6dc30f1e7c5d1567e;p=thirdparty%2Ftvheadend.git

SAT>IP: Add new options to the help text
---

diff --git a/docs/html/config_tvadapters.html b/docs/html/config_tvadapters.html
index a4d9a36f2..939a3baa5 100644
--- a/docs/html/config_tvadapters.html
+++ b/docs/html/config_tvadapters.html
@@ -18,6 +18,11 @@
 
   <dt>Name</dt>
   <dd>The name of this tuner.</dd>
+
+  <dt>Priority</dt>
+  <dd>The tuner priority value (higher value = higher priority to use this
+      tuner).</dd>
+
 </dl>
 </p>
 
@@ -70,6 +75,21 @@
         a slave one and tvheadend will assure that this tuner will not
         use incompatible parameters (position, polarization, lo-hi).</p>
   </dd>
+
+  <dt>Next tune delay in ms (0-2000)</dt>
+  <dd>The delay before tuning in milliseconds after tuner stop. If the time
+      after previous start and next start is greater than this value -
+      the delay is not applied.</dt>
+
+  <dt>Send full PLAY cmd</dt>
+  <dd>Send the full RTSP PLAY command after full RTSP SETUP command. Some
+      device firmwares requires this to get MPEG-TS stream.</dd>
+
+  <dt>Force teardown delay<dt>
+  <dd>Force the delay between RTSP TEARDOWN and RTSP SETUP command (value
+      from 'Next tune delay in ms' is used). Some devices are not able to handle
+      quick continuous tuning.</dd>
+
 </dl>
 
 </div>