From: Haibo Chen Date: Wed, 19 Nov 2025 03:22:39 +0000 (+0800) Subject: arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level X-Git-Tag: v6.19-rc5~17^2~1^2~10 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e0d8678c2f09dca22e6197321f223fa9a0ca2839;p=thirdparty%2Fkernel%2Flinux.git arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level light sensor isl29023 share the interrupt with lsm303arg, but these two devices use different interrupt type. According to the datasheet of these two devides, both support low level trigger type, so correct the interrupt type here to avoid the following error log: irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000! Fixes: 9918092cbb0e ("arm64: dts: imx8qm-mek: add i2c0 and children devices") Fixes: 1d8a9f043a77 ("arm64: dts: imx8: use defines for interrupts") Signed-off-by: Haibo Chen Reviewed-by: Frank Li Signed-off-by: Shawn Guo --- diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 779d9f78fb81..667ba2fea867 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -576,7 +576,7 @@ compatible = "isil,isl29023"; reg = <0x44>; interrupt-parent = <&lsio_gpio4>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; pressure-sensor@60 {