From: Andrii Kuiukoff Date: Wed, 29 Oct 2025 20:05:19 +0000 (+0200) Subject: mediatek: creatlentem clt-r30b1: add all-in-UBI layout X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e414ca4fa6cbc8d1e95d59966b614a4129b5371f;p=thirdparty%2Fopenwrt.git mediatek: creatlentem clt-r30b1: add all-in-UBI layout This commit introduces OpenWrt U-Boot all-in-ubi layout support for the CreatLentem CLT-R30B1, enabling: - Fully-featured U-Boot - Effective recovery mechanisms - Prolonged device lifetime by allocating most of the flash to UBI (which takes care of wear-leveling) - Maximum available storage space for OpenWrt - Unified firmware across different device variants OpenWrt U-Boot UBI flash instructions ------------------------------------- Using the installer image ------------------------- To simplify the installation process, this method uses a fork of Daniel Golle's (@dangowrt) UBI Installer https://github.com/dangowrt/owrt-ubi-installer 1. Ensure your router is running the latest generic OpenWrt firmware. Upgrade it if necessary. 2. Obtain the installer image: Build the installer from source https://github.com/andros-ua/owrt-ubi-installer/tree/clt-r30b1 or download a prebuilt image from the https://github.com/andros-ua/owrt-ubi-installer/releases 3. Flash the openwrt*creatlentem_clt-r30b1-ubi-initramfs-recovery-installer.itb image using sysupgrade. 4. Wait for installation: the green status LED will blink rapidly, indicating that the all-in-UBI installer is running. 5. Once the installation finishes, the status LED will turn solid white (lime) for 5 seconds. 6. After the device reboots, perform a final sysupgrade using the openwrt*creatlentem_clt-r30b1-ubi-squashfs-sysupgrade.itb image. Return to stock layout ---------------------- 1. Flash openwrt*creatlentem_clt-r30b1(-112m)-initramfs-kernel.bin via sysupgrade 2. Copy files to /tmp on the device via SCP: BL2.bin u-boot-env.bin Factory.bin FIP.bin openwrt*creatlentem_clt-r30b1(-112m)-squashfs-sysupgrade.bin 3. Restore stock MTD partitions: apk add kmod-mtd-rw insmod mtd-rw i_want_a_brick=1 mtd write /tmp/BL2.bin BL2 mtd write /tmp/u-boot-env.bin u-boot-env mtd write /tmp/Factory.bin Factory mtd write /tmp/FIP.bin FIP 4. Install the system: sysupgrade /tmp/*sysupgrade.bin Recovery -------- Use mtk_uartboot to recover corrupted BL2 or FIP via UART: https://github.com/981213/mtk_uartboot Stock layout ---------------------------------------- | dev: size erasesize name | | mtd0: 00100000 00020000 "BL2" | | mtd1: 00080000 00020000 "u-boot-env" | | mtd2: 00200000 00020000 "Factory" | | mtd3: 00200000 00020000 "FIP" | | mtd4: 07000000 00020000 "ubi" | ---------------------------------------- OpenWrt U-Boot UBI layout ---------------------------------- | dev: size erasesize name | | mtd0: 00100000 00020000 "BL2" | | mtd1: 07f00000 00020000 "ubi" | ---------------------------------- Signed-off-by: Andrii Kuiukoff Link: https://github.com/openwrt/openwrt/pull/20666 Signed-off-by: Jonas Jelonek --- diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index f9a37bc7757..eb0a29ecc90 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -317,6 +317,18 @@ define U-Boot/mt7981_comfast_cf-wr632ax DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ddr3-1866 endef +define U-Boot/mt7981_creatlentem_clt-r30b1-ubi + NAME:=CreatLentem CLT-R30B1 (UBI) + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=creatlentem_clt-r30b1-ubi + UBOOT_CONFIG:=mt7981_creatlentem_clt-r30b1-ubi + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand-ubi + BL2_SOC:=mt7981 + BL2_DDRTYPE:=ddr3-1866 + DEPENDS:=+trusted-firmware-a-mt7981-spim-nand-ubi-ddr3-1866 +endef + define U-Boot/mt7981_cudy_tr3000-v1 NAME:=Cudy TR3000 v1 BUILD_SUBTARGET:=filogic @@ -1247,6 +1259,7 @@ UBOOT_TARGETS := \ mt7981_cmcc_rax3000m-nand-ddr3 \ mt7981_cmcc_rax3000m-nand-ddr4 \ mt7981_comfast_cf-wr632ax \ + mt7981_creatlentem_clt-r30b1-ubi \ mt7981_cudy_tr3000-v1 \ mt7981_cudy_wbr3000uax-v1 \ mt7981_cudy_wr3000e-v1 \ diff --git a/package/boot/uboot-mediatek/patches/473-add-creatlentem_clt-r30b1-ubi.patch b/package/boot/uboot-mediatek/patches/473-add-creatlentem_clt-r30b1-ubi.patch new file mode 100644 index 00000000000..ba5a203a1b2 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/473-add-creatlentem_clt-r30b1-ubi.patch @@ -0,0 +1,315 @@ +--- /dev/null ++++ b/configs/mt7981_creatlentem_clt-r30b1-ubi_defconfig +@@ -0,0 +1,112 @@ ++CONFIG_ARM=y ++CONFIG_ARM_SMCCC=y ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7981-creatlentem-clt-r30b1-ubi" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_TARGET_MT7981=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_FIT=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_USE_PREBOOT=y ++CONFIG_DEFAULT_FDT_FILE="mt7981-creatlentem-clt-r30b1-ubi" ++CONFIG_LOGLEVEL=7 ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_LOG=y ++# CONFIG_BOARD_INIT is not set ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_PROMPT="MT7981> " ++CONFIG_CMD_CPU=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_CMD_RNG=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_LINK_LOCAL=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_UUID=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_ENV_REDUNDANT=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_ENV_RELOC_GD_ENV_ADDR=y ++CONFIG_ENV_USE_DEFAULT_ENV_TEXT_FILE=y ++CONFIG_ENV_DEFAULT_ENV_TEXT_FILE="defenvs/creatlentem_clt-r30b1-ubi_env" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_NETCONSOLE=y ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_CLK=y ++CONFIG_GPIO_HOG=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++# CONFIG_MMC is not set ++CONFIG_MTD=y ++CONFIG_DM_MTD=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTD_UBI_FASTMAP=y ++CONFIG_PHY_FIXED=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PHY=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7981=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_RAM=y ++CONFIG_DM_RNG=y ++CONFIG_RNG_MTK_V2=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPIM=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y +--- /dev/null ++++ b/defenvs/creatlentem_clt-r30b1-ubi_env +@@ -0,0 +1,54 @@ ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-creatlentem_clt-r30b1-ubi-squashfs-sysupgrade.itb ++bootled_pwr=red:status ++bootled_rec=green:status ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then led $bootled_pwr off ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=led $bootled_rec off ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off ++boot_recovery=led $bootled_pwr off ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=led $bootled_pwr off ; while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++preboot=led $bootled_pwr on ; led $bootled_rec on ++reset_factory=mw $loadaddr 0xff 0x1f000 ; ubi write $loadaddr ubootenv 0x1f000 ; ubi write $loadaddr ubootenv2 0x1f000 ; ubi remove rootfs_data ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x1f000 dynamic ; ubi check ubootenv2 || ubi create ubootenv2 0x1f000 dynamic ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000 ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" +--- /dev/null ++++ b/arch/arm/dts/mt7981-creatlentem-clt-r30b1-ubi.dts +@@ -0,0 +1,140 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++ ++/dts-v1/; ++#include "mt7981.dtsi" ++#include ++#include ++ ++/ { ++ model = "CreatLentem CLT-R30B1 (UBI)"; ++ compatible = "creatlentem,clt-r30b1-ubi", "mediatek,mt7981"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x10000000>; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ button-reset { ++ label = "reset"; ++ linux,code = ; ++ gpios = <&pio 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ button-wps { ++ label = "wps"; ++ linux,code = ; ++ gpios = <&pio 0 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ led_status_green: led-0 { ++ label = "green:status"; ++ gpios = <&pio 11 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led_status_red: led-1 { ++ label = "red:status"; ++ gpios = <&pio 12 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ }; ++ }; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pio { ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++ ++ line_8-hog { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "LEDs power"; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <2>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <52000000>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "ubi"; ++ reg = <0x100000 0x7f00000>; ++ compatible = "linux,ubi"; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; diff --git a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic index 6caeca6dd9c..21646b100a5 100644 --- a/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-tools/uboot-envtools/files/mediatek_filogic @@ -27,6 +27,7 @@ acer,predator-w6x-ubootmod|\ asus,zenwifi-bt8-ubootmod|\ cmcc,a10-ubootmod|\ comfast,cf-wr632ax-ubootmod|\ +creatlentem,clt-r30b1-ubi|\ cudy,tr3000-v1-ubootmod|\ cudy,wbr3000uax-v1-ubootmod|\ cudy,wr3000e-v1-ubootmod|\ diff --git a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-112m.dts b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-112m.dts index 36351565ebb..c987c76fad4 100644 --- a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-112m.dts +++ b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-112m.dts @@ -7,9 +7,12 @@ compatible = "creatlentem,clt-r30b1-112m", "mediatek,mt7981"; }; -&partitions { - partition@580000 { - label = "ubi"; - reg = <0x0580000 0x7000000>; - }; +&spi_nand { + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; +}; + +&ubi { + reg = <0x0580000 0x7000000>; }; diff --git a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-common.dtsi b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-common.dtsi index 6958c174a07..ff55eb3f9f0 100644 --- a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-common.dtsi +++ b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-common.dtsi @@ -17,7 +17,7 @@ serial0 = &uart0; }; - chosen { + chosen: chosen { stdout-path = "serial0:115200n8"; }; @@ -109,7 +109,7 @@ pinctrl-0 = <&spi0_flash_pins>; status = "okay"; - spi_nand@0 { + spi_nand: spi-nand@0 { compatible = "spi-nand"; reg = <0>; @@ -124,10 +124,6 @@ spi-cal-addrlen = <5>; spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>; - mediatek,nmbm; - mediatek,bmt-max-ratio = <1>; - mediatek,bmt-max-reserved-blocks = <64>; - partitions: partitions { compatible = "fixed-partitions"; #address-cells = <1>; @@ -183,6 +179,10 @@ reg = <0x380000 0x200000>; read-only; }; + + ubi: partition@580000 { + label = "ubi"; + }; }; }; }; diff --git a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-ubi.dts b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-ubi.dts new file mode 100644 index 00000000000..b4cd51e1015 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1-ubi.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7981b-creatlentem-clt-r30b1-common.dtsi" + +/ { + model = "CreatLentem CLT-R30B1 (UBI)"; + compatible = "creatlentem,clt-r30b1-ubi", "mediatek,mt7981"; +}; + +&chosen { + bootargs = "root=/dev/fit0 rootwait"; + rootdisk = <&ubi_rootdisk>; +}; + +/delete-node/ &partitions; + +&spi_nand { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "ubi"; + reg = <0x100000 0x7f00000>; + compatible = "linux,ubi"; + + volumes { + ubi_factory: ubi-volume-factory { + volname = "factory"; + }; + + ubi_rootdisk: ubi-volume-fit { + volname = "fit"; + }; + + ubi-volume-ubootenv { + volname = "ubootenv"; + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; + }; + + ubi-volume-ubootenv2 { + volname = "ubootenv2"; + nvmem-layout { + compatible = "u-boot,env-redundant-bool"; + }; + }; + }; + }; + }; +}; + +&ubi_factory { + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory_0: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + compatible = "mac-base"; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_24: macaddr@24 { + compatible = "mac-base"; + reg = <0x24 0x6>; + #nvmem-cell-cells = <1>; + }; + + macaddr_factory_2a: macaddr@2a { + compatible = "mac-base"; + reg = <0x2a 0x6>; + #nvmem-cell-cells = <1>; + }; + }; +}; diff --git a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1.dts b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1.dts index 941d0c34353..9b38fd8cc26 100644 --- a/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1.dts +++ b/target/linux/mediatek/dts/mt7981b-creatlentem-clt-r30b1.dts @@ -8,13 +8,18 @@ }; &partitions { - partition@580000 { - label = "ubi"; - reg = <0x0580000 0x4000000>; - }; partition@4580000 { label = "data"; reg = <0x4580000 0x2000000>; }; +}; + +&spi_nand { + mediatek,nmbm; + mediatek,bmt-max-ratio = <1>; + mediatek,bmt-max-reserved-blocks = <64>; +}; +&ubi { + reg = <0x0580000 0x4000000>; }; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 8fcbcce3d38..36d79b80d7c 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -56,6 +56,7 @@ mediatek_setup_interfaces() confiabits,mt7981|\ creatlentem,clt-r30b1|\ creatlentem,clt-r30b1-112m|\ + creatlentem,clt-r30b1-ubi|\ cudy,wr3000-v1|\ globitel,bt-r320|\ huasifei,wh3000r-nand|\ diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh index 80fbfb24c84..bc6d8271747 100644 --- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh +++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh @@ -147,6 +147,7 @@ platform_do_upgrade() { cmcc,a10-ubootmod|\ cmcc,rax3000m|\ comfast,cf-wr632ax-ubootmod|\ + creatlentem,clt-r30b1-ubi|\ cudy,tr3000-v1-ubootmod|\ cudy,wbr3000uax-v1-ubootmod|\ cudy,wr3000e-v1-ubootmod|\ @@ -360,6 +361,7 @@ platform_check_image() { cmcc,a10-ubootmod|\ cmcc,rax3000m|\ comfast,cf-wr632ax-ubootmod|\ + creatlentem,clt-r30b1-ubi|\ cudy,tr3000-v1-ubootmod|\ cudy,wbr3000uax-v1-ubootmod|\ cudy,wr3000e-v1-ubootmod|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index bda388ee3bf..eb660ddc142 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1079,7 +1079,6 @@ define Device/creatlentem_clt-r30b1-common BLOCKSIZE := 128k PAGESIZE := 2048 KERNEL_IN_UBI := 1 - IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef define Device/creatlentem_clt-r30b1-112m @@ -1090,6 +1089,7 @@ define Device/creatlentem_clt-r30b1-112m DEVICE_DTS := mt7981b-creatlentem-clt-r30b1-112m SUPPORTED_DEVICES += clt,r30b1 clt,r30b1-112m IMAGE_SIZE := 114688k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata $(call Device/creatlentem_clt-r30b1-common) endef TARGET_DEVICES += creatlentem_clt-r30b1-112m @@ -1098,10 +1098,32 @@ define Device/creatlentem_clt-r30b1 DEVICE_DTS := mt7981b-creatlentem-clt-r30b1 SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb IMAGE_SIZE := 65536k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata $(call Device/creatlentem_clt-r30b1-common) endef TARGET_DEVICES += creatlentem_clt-r30b1 +define Device/creatlentem_clt-r30b1-ubi + DEVICE_VARIANT := (UBI) + DEVICE_ALT0_VARIANT := (UBI) + DEVICE_ALT1_VARIANT := (UBI) + DEVICE_ALT2_VARIANT := (UBI) + DEVICE_DTS := mt7981b-creatlentem-clt-r30b1-ubi + UBOOTENV_IN_UBI := 1 + IMAGES := sysupgrade.itb + KERNEL_INITRAMFS_SUFFIX := -recovery.itb + KERNEL := kernel-bin | gzip + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.itb := append-kernel | \ + fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata + ARTIFACTS := preloader.bin bl31-uboot.fip + ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ubi-ddr3-1866 + ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot creatlentem_clt-r30b1-ubi + $(call Device/creatlentem_clt-r30b1-common) +endef +TARGET_DEVICES += creatlentem_clt-r30b1-ubi + define Device/cudy_ap3000outdoor-v1 DEVICE_VENDOR := Cudy DEVICE_MODEL := AP3000 Outdoor