From: Francesco Dolcini Date: Fri, 5 Dec 2025 08:27:28 +0000 (+0100) Subject: doc: board: verdin-am62p: Fix boot log output X-Git-Tag: v2026.01-rc4~10^2 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e5996e3ed350598c79cd7afaf6d4f0618598e390;p=thirdparty%2Fu-boot.git doc: board: verdin-am62p: Fix boot log output Fix boot log output not being rendered correctly, fix it doing the same as done in verdin-am62.rst. Fixes: b8c43968b801 ("board: toradex: add verdin am62p support") Signed-off-by: Francesco Dolcini --- diff --git a/doc/board/toradex/verdin-am62p.rst b/doc/board/toradex/verdin-am62p.rst index 2f3262b8d1e..cc60505a40c 100644 --- a/doc/board/toradex/verdin-am62p.rst +++ b/doc/board/toradex/verdin-am62p.rst @@ -125,72 +125,69 @@ one may also use the update U-Boot wrappers: Boot ---- -Output: - -.. code-block:: console - -U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:46:57 +0100) -SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)') -Changed A53 CPU frequency to 1250000000Hz (U grade) in DT -SPL initial stack usage: 17080 bytes -Trying to boot from MMC1 -Authentication passed -Authentication passed -Authentication passed -Loading Environment from nowhere... OK -init_env from device 9 not supported! -Authentication passed -Authentication passed -Starting ATF on ARM64 core... - -NOTICE: BL31: v2.12.0(release):v2.12.0-1106-g4301798db096 -NOTICE: BL31: Built : 10:57:58, May 9 2025 -I/TC: -I/TC: OP-TEE version: 4.6.0-18-g76d920d354df (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #4 Tue May 6 19:48:13 UTC 2025 aarch64 -I/TC: WARNING: This OP-TEE configuration might be insecure! -I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html -I/TC: Primary CPU initializing -I/TC: GIC redistributor base address not provided -I/TC: Assuming default GIC group status and modifier -I/TC: SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)') -I/TC: Activated SA2UL device -I/TC: Enabled firewalls for SA2UL TRNG device -I/TC: SA2UL TRNG initialized -I/TC: SA2UL Drivers initialized -I/TC: HUK Initialized -I/TC: Primary CPU switching to normal world boot - -U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100) -SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)') -SPL initial stack usage: 1760 bytes -HW CFG: 0x00 -Trying to boot from MMC1 -Authentication passed -Authentication passed - - -U-Boot 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100) - -SoC: AM62PX SR1.0 HS-FS -DRAM: 2 GiB -Core: 147 devices, 31 uclasses, devicetree: separate -MMC: mmc@fa10000: 0, mmc@fa00000: 1 -Loading Environment from MMC... Reading from MMC(0)... OK -In: serial@2800000 -Out: serial@2800000 -Err: serial@2800000 -Model: Toradex 0099 Verdin AM62P Quad 2GB WB IT V1.0A -Serial#: 15664919 -Carrier: Toradex Dahlia V1.1D, Serial# 11287149 -am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01903 cpsw_ver: 0x6BA81903 ale_ver: 0x00290105 Ports:2 -Setting variant to wifi -Net: -Warning: ethernet@8000000port@1 MAC addresses don't match: -Address in ROM is 58:a1:5f:b8:93:f9 -Address in environment is 00:14:2d:ef:07:17 -eth0: ethernet@8000000port@1 [PRIME]Could not get PHY for mdio@f00: addr 7 -am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed - -Hit any key to stop autoboot: 0 -Verdin AM62P # - +Output:: + + U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:46:57 +0100) + SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)') + Changed A53 CPU frequency to 1250000000Hz (U grade) in DT + SPL initial stack usage: 17080 bytes + Trying to boot from MMC1 + Authentication passed + Authentication passed + Authentication passed + Loading Environment from nowhere... OK + init_env from device 9 not supported! + Authentication passed + Authentication passed + Starting ATF on ARM64 core... + + NOTICE: BL31: v2.12.0(release):v2.12.0-1106-g4301798db096 + NOTICE: BL31: Built : 10:57:58, May 9 2025 + I/TC: + I/TC: OP-TEE version: 4.6.0-18-g76d920d354df (gcc version 12.3.1 20230626 (Arm GNU Toolchain 12.3.Rel1 (Build arm-12.35))) #4 Tue May 6 19:48:13 UTC 2025 aarch64 + I/TC: WARNING: This OP-TEE configuration might be insecure! + I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html + I/TC: Primary CPU initializing + I/TC: GIC redistributor base address not provided + I/TC: Assuming default GIC group status and modifier + I/TC: SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)') + I/TC: Activated SA2UL device + I/TC: Enabled firewalls for SA2UL TRNG device + I/TC: SA2UL TRNG initialized + I/TC: SA2UL Drivers initialized + I/TC: HUK Initialized + I/TC: Primary CPU switching to normal world boot + + U-Boot SPL 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100) + SYSFW ABI: 4.0 (firmware rev 0x000b '11.0.7--v11.00.07 (Fancy Rat)') + SPL initial stack usage: 1760 bytes + HW CFG: 0x00 + Trying to boot from MMC1 + Authentication passed + Authentication passed + + + U-Boot 2025.04-00006-g51dc98d36470 (May 12 2025 - 15:47:54 +0100) + + SoC: AM62PX SR1.0 HS-FS + DRAM: 2 GiB + Core: 147 devices, 31 uclasses, devicetree: separate + MMC: mmc@fa10000: 0, mmc@fa00000: 1 + Loading Environment from MMC... Reading from MMC(0)... OK + In: serial@2800000 + Out: serial@2800000 + Err: serial@2800000 + Model: Toradex 0099 Verdin AM62P Quad 2GB WB IT V1.0A + Serial#: 15664919 + Carrier: Toradex Dahlia V1.1D, Serial# 11287149 + am65_cpsw_nuss ethernet@8000000: K3 CPSW: nuss_ver: 0x6BA01903 cpsw_ver: 0x6BA81903 ale_ver: 0x00290105 Ports:2 + Setting variant to wifi + Net: + Warning: ethernet@8000000port@1 MAC addresses don't match: + Address in ROM is 58:a1:5f:b8:93:f9 + Address in environment is 00:14:2d:ef:07:17 + eth0: ethernet@8000000port@1 [PRIME]Could not get PHY for mdio@f00: addr 7 + am65_cpsw_nuss_port ethernet@8000000port@2: phy_connect() failed + + Hit any key to stop autoboot: 0 + Verdin AM62P #