From: Mathew McBride Date: Fri, 1 May 2026 01:36:08 +0000 (+1000) Subject: arm: dts: remove local copy of Ten64 board DTS X-Git-Tag: v2026.07-rc2~16^2~1 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e7e0cd82b7617003c3517f5545a42a6e34617b00;p=thirdparty%2Fu-boot.git arm: dts: remove local copy of Ten64 board DTS This board has been migrated to the upstream / kernel device tree version (OF_UPSTREAM), so remove the old 'local' copies that are no longer required. However, the -u-boot.dtsi append needs to remain, because the SoC fsl-ls1088a-u-boot.dtsi is required for some devices (like PCIe controllers and DPAA2 ethernet) to properly enumerate under U-Boot. Reviewed-by: Simon Glass Signed-off-by: Mathew McBride Signed-off-by: Peng Fan --- diff --git a/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi b/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi index 4e6700d586e..0d64795bf44 100644 --- a/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1088a-ten64-u-boot.dtsi @@ -18,11 +18,3 @@ ethernet9 = &dpmac1; }; }; - -&i2c0 { - uc: board-controller@7e { - compatible = "traverse,ten64-controller"; - reg = <0x7e>; - }; -}; - diff --git a/arch/arm/dts/fsl-ls1088a-ten64.dts b/arch/arm/dts/fsl-ls1088a-ten64.dts deleted file mode 100644 index 0d11440d88d..00000000000 --- a/arch/arm/dts/fsl-ls1088a-ten64.dts +++ /dev/null @@ -1,388 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Traverse Technologies Ten64 - * (LS1088A) board - * Based on fsl-ls1088a-rdb.dts - * Copyright 2017-2020 NXP - * Copyright 2019-2023 Traverse Technologies - * - * Author: Mathew McBride - */ - -/dts-v1/; - -#include "fsl-ls1088a.dtsi" - -#include -#include - -/ { - model = "Traverse Ten64"; - compatible = "traverse,ten64", "fsl,ls1088a"; - - aliases { - serial0 = &duart0; - serial1 = &duart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - buttons { - compatible = "gpio-keys"; - - /* Fired by system controller when - * external power off (e.g ATX Power Button) - * asserted - */ - button-powerdn { - label = "External Power Down"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - /* Rear Panel 'ADMIN' button (GPIO_H) */ - button-admin { - label = "ADMIN button"; - gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-0 { - label = "ten64:green:sfp1:down"; - gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; - }; - - led-1 { - label = "ten64:green:sfp2:up"; - gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; - }; - - led-2 { - label = "ten64:admin"; - gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>; - }; - }; - - sfp_xg0: dpmac2-sfp { - compatible = "sff,sfp"; - i2c-bus = <&sfplower_i2c>; - tx-fault-gpios = <&sfpgpio 0 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&sfpgpio 1 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sfpgpio 2 GPIO_ACTIVE_LOW>; - los-gpios = <&sfpgpio 3 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <2000>; - }; - - sfp_xg1: dpmac1-sfp { - compatible = "sff,sfp"; - i2c-bus = <&sfpupper_i2c>; - tx-fault-gpios = <&sfpgpio 4 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&sfpgpio 5 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&sfpgpio 6 GPIO_ACTIVE_LOW>; - los-gpios = <&sfpgpio 7 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <2000>; - }; -}; - -/* XG1 - Upper SFP */ -&dpmac1 { - sfp = <&sfp_xg1>; - pcs-handle = <&pcs1>; - phy-connection-type = "10gbase-r"; - managed = "in-band-status"; -}; - -/* XG0 - Lower SFP */ -&dpmac2 { - sfp = <&sfp_xg0>; - pcs-handle = <&pcs2>; - phy-connection-type = "10gbase-r"; - managed = "in-band-status"; -}; - -/* DPMAC3..6 is GE4 to GE8 */ -&dpmac3 { - phy-handle = <&mdio1_phy5>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs3_0>; -}; - -&dpmac4 { - phy-handle = <&mdio1_phy6>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs3_1>; -}; - -&dpmac5 { - phy-handle = <&mdio1_phy7>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs3_2>; -}; - -&dpmac6 { - phy-handle = <&mdio1_phy8>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs3_3>; -}; - -/* DPMAC7..10 is GE0 to GE3 */ -&dpmac7 { - phy-handle = <&mdio1_phy1>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs7_0>; -}; - -&dpmac8 { - phy-handle = <&mdio1_phy2>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs7_1>; -}; - -&dpmac9 { - phy-handle = <&mdio1_phy3>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs7_2>; -}; - -&dpmac10 { - phy-handle = <&mdio1_phy4>; - phy-connection-type = "qsgmii"; - managed = "in-band-status"; - pcs-handle = <&pcs7_3>; -}; - -&duart0 { - status = "okay"; -}; - -&duart1 { - status = "okay"; -}; - -&emdio1 { - status = "okay"; - - mdio1_phy5: ethernet-phy@c { - reg = <0xc>; - }; - - mdio1_phy6: ethernet-phy@d { - reg = <0xd>; - }; - - mdio1_phy7: ethernet-phy@e { - reg = <0xe>; - }; - - mdio1_phy8: ethernet-phy@f { - reg = <0xf>; - }; - - mdio1_phy1: ethernet-phy@1c { - reg = <0x1c>; - }; - - mdio1_phy2: ethernet-phy@1d { - reg = <0x1d>; - }; - - mdio1_phy3: ethernet-phy@1e { - reg = <0x1e>; - }; - - mdio1_phy4: ethernet-phy@1f { - reg = <0x1f>; - }; -}; - -&esdhc { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - sfpgpio: gpio@76 { - compatible = "ti,tca9539"; - reg = <0x76>; - #gpio-cells = <2>; - gpio-controller; - - admin_led_lower { - gpio-hog; - gpios = <13 GPIO_ACTIVE_HIGH>; - output-low; - }; - }; - - at97sc: tpm@29 { - compatible = "atmel,at97sc3204t"; - reg = <0x29>; - }; -}; - -&i2c2 { - status = "okay"; - - rx8035: rtc@32 { - compatible = "epson,rx8035"; - reg = <0x32>; - }; -}; - -&i2c3 { - status = "okay"; - - i2c-mux@70 { - compatible = "nxp,pca9540"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x70>; - - sfpupper_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - sfplower_i2c: i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - }; - }; -}; - -&pcs_mdio1 { - status = "okay"; -}; - -&pcs_mdio2 { - status = "okay"; -}; - -&pcs_mdio3 { - status = "okay"; -}; - -&pcs_mdio7 { - status = "okay"; -}; - -&qspi { - status = "okay"; - - en25s64: flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <20000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "bl2"; - reg = <0 0x100000>; - }; - - partition@100000 { - label = "bl3"; - reg = <0x100000 0x200000>; - }; - - partition@300000 { - label = "mcfirmware"; - reg = <0x300000 0x200000>; - }; - - partition@500000 { - label = "ubootenv"; - reg = <0x500000 0x80000>; - }; - - partition@580000 { - label = "dpl"; - reg = <0x580000 0x40000>; - }; - - partition@5C0000 { - label = "dpc"; - reg = <0x5C0000 0x40000>; - }; - - partition@600000 { - label = "devicetree"; - reg = <0x600000 0x40000>; - }; - }; - }; - - nand: flash@1 { - compatible = "spi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <1>; - spi-max-frequency = <20000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* reserved for future boot direct from NAND flash - * (this would use the same layout as the 8MiB NOR flash) - */ - partition@0 { - label = "nand-boot-reserved"; - reg = <0 0x800000>; - }; - - /* recovery / install environment */ - partition@800000 { - label = "recovery"; - reg = <0x800000 0x2000000>; - }; - - /* ubia (first OpenWrt) - a/b names to prevent confusion with ubi0/1/etc. */ - partition@2800000 { - label = "ubia"; - reg = <0x2800000 0x6C00000>; - }; - - /* ubib (second OpenWrt) */ - partition@9400000 { - label = "ubib"; - reg = <0x9400000 0x6C00000>; - }; - }; - }; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -};