From: RD Babiera Date: Tue, 10 Mar 2026 20:41:05 +0000 (+0000) Subject: usb: typec: altmode/displayport: set displayport signaling rate in configure message X-Git-Tag: v7.0-rc4~14^2~10 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e8557acfa079a54b59a21f447c82a31aec7717df;p=thirdparty%2Flinux.git usb: typec: altmode/displayport: set displayport signaling rate in configure message dp_altmode_configure sets the signaling rate to the current configuration's rate and then shifts the value to the Select Configuration bitfield. On the initial configuration, dp->data.conf is 0 to begin with, so the signaling rate field is never set, which leads to some DisplayPort Alt Mode partners sending NAK to the Configure message. Set the signaling rate to the capabilities supported by both the port and the port partner. If the cable supports DisplayPort Alt Mode, then include its capabilities as well. Fixes: a17fae8fc38e ("usb: typec: Add Displayport Alternate Mode 2.1 Support") Cc: stable Signed-off-by: RD Babiera Acked-by: Heikki Krogerus Link: https://patch.msgid.link/20260310204106.3939862-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index d185688a16b1..35d9c3086990 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -100,9 +100,14 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) { u8 pin_assign = 0; u32 conf; + u32 signal; /* DP Signalling */ - conf = (dp->data.conf & DP_CONF_SIGNALLING_MASK) >> DP_CONF_SIGNALLING_SHIFT; + signal = DP_CAP_DP_SIGNALLING(dp->port->vdo) & DP_CAP_DP_SIGNALLING(dp->alt->vdo); + if (dp->plug_prime) + signal &= DP_CAP_DP_SIGNALLING(dp->plug_prime->vdo); + + conf = signal << DP_CONF_SIGNALLING_SHIFT; switch (con) { case DP_STATUS_CON_DISABLED: