From: Robert Millan Date: Thu, 21 Jan 2010 16:56:22 +0000 (+0000) Subject: 2010-01-21 Robert Millan X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=e8b13ced38d29d23e560da0f0dbbc7cb6752e3b6;p=thirdparty%2Fgrub.git 2010-01-21 Robert Millan * autogen.sh: New file. * INSTALL: Remove from version control. * Makefile.in: Likewise. * aclocal.m4: Likewise. * config.guess: Likewise. * config.sub: Likewise. * configure: Likewise. * depcomp: Likewise. * docs/Makefile.in: Likewise. * docs/mdate-sh: Likewise. * docs/texinfo.tex: Likewise. * grub/Makefile.in: Likewise. * install-sh: Likewise. * lib/Makefile.in: Likewise. * missing: Likewise. * mkinstalldirs: Likewise. * netboot/Makefile.in: Likewise. * stage1/Makefile.in: Likewise. * stage2/Makefile.in: Likewise. * util/Makefile.in: Likewise. --- diff --git a/ChangeLog b/ChangeLog index c3b482a24..04a0d9899 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,27 @@ +2010-01-21 Robert Millan + + * autogen.sh: New file. + + * INSTALL: Remove from version control. + * Makefile.in: Likewise. + * aclocal.m4: Likewise. + * config.guess: Likewise. + * config.sub: Likewise. + * configure: Likewise. + * depcomp: Likewise. + * docs/Makefile.in: Likewise. + * docs/mdate-sh: Likewise. + * docs/texinfo.tex: Likewise. + * grub/Makefile.in: Likewise. + * install-sh: Likewise. + * lib/Makefile.in: Likewise. + * missing: Likewise. + * mkinstalldirs: Likewise. + * netboot/Makefile.in: Likewise. + * stage1/Makefile.in: Likewise. + * stage2/Makefile.in: Likewise. + * util/Makefile.in: Likewise. + 2010-01-21 Robert Millan * configure.ac: Add AM_PROG_AS (to fix automake generation). diff --git a/INSTALL b/INSTALL deleted file mode 100644 index 1ba68a690..000000000 --- a/INSTALL +++ /dev/null @@ -1,266 +0,0 @@ --*- Text -*- - -This is the GRUB. Welcome. - -This file contains instructions for compiling and installing the GRUB. - -The Requirements -================ - -GRUB depends on some software packages installed into your system. If -you don't have any of them, please obtain and install them before -configuring the GRUB. - -* GCC - - Probably every recent GCC should work, but we recommend GCC 2.95 and - later, since you can create smaller binary images. See the web page - . - -* GNU Make - - For now, the Makefiles produced by Automake depends on GNU Make. See - the web page . - -* GNU binutils 2.9.1.0.23 or later - - Binutils has changed the behavior of 16bit assembler between 2.9.1 - and 2.9.1.0.x, and we support only 2.9.1.0.x and higher. In - particular, we recommend using binutils 2.10, since it is the only - public release that supports real 16bit mode. Please take a look at - the web page , for more - information. Note that you don't have to install it into any system - directory. See the section "Operation Controls", if you want to - install binutils into your own directory. - -If you'd like to develop GRUB, these below are also required. Don't -forget to specify the option `--enable-maintainer-mode' when running the -configure script. - -* Texinfo 4.0 or later - - We use some new macros in the documents, so you need a recent - Texinfo release. See the web page - . - -* Developers: GNU Autoconf 2.5x and GNU Automake 1.7 or later - - You should not need Automake just to compile GRUB, but you will need - it if you edit any of the build files (Makefile.am, configure.in, - etc). We use the new "per-executable flags" feature found in the - latest release of automake. See the web page - . - - -Configuring the GRUB -==================== - -The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a -file `config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). - -If you need to do unusual things to compile the package, please try to -figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - -The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. - - -Building the GRUB -================= - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and - type `./configure' to configure the package for your system. If - you're using `csh' on an old version of System V, you might need - to type `sh ./configure' instead to prevent `csh' from trying to - execute `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - - -Compiling For Multiple Architectures -==================================== - -You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. `cd' to the directory where you want the object files -and executables to go and run the `configure' script. `configure' -automatically checks for the source code in the directory that -`configure' is in and in `..'. - - -Installation Names -================== - -By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix by giving `configure' the option `--prefix=PATH'. - -You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If -you give `configure' the option `--exec-prefix=PATH', the package will -use PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - -In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for -particular kinds of files. Run `configure --help' for a list of the -directories you can set and what kinds of files go in them. - -If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' -the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Please note, however, that the GRUB knows where it is located in the -filesystem. If you have installed it in an unusual location, the -system might not work properly, or at all. The chief utility of these -options for the GRUB is to allow you to "install" in some alternate -location, and then copy these to the actual root filesystem later. - - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - - -Operation Controls -================== - - `configure' recognizes the following options to control how it -operates. - -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - -`--help' - Print a summary of the options to `configure', and exit. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--enable-maintainer-mode' - Enable make rules and dependencies not useful (and sometimes - confusing) to the casual installer. If you are a GRUB developer, - it is a good idea to specify this option. - -`--disable-ext2fs' - Omit the ext2fs support in Stage 2. - -`--disable-fat' - Omit the FAT support in Stage 2. - -`--disable-ffs' - Omit the FFS support in Stage 2. - -`--disable-minix' - Omit the Minix fs support in Stage 2. - -`--disable-reiserfs' - Omit the ReiserFS support in Stage 2. - -`--disable-vstafs' - Omit the VSTa filesystem support in Stage 2. - -`--disable-jfs' - Omit the JFS support in Stage 2. - -`--disable-xfs' - Omit the XFS support in Stage 2. - -`--disable-ufs2' - Omit the UFS2 support in Stage 2. - -`--disable-iso9660' - Omit the ISO9660 support in Stage 2. - -`--disable-gunzip' - Omit the decompression support in Stage 2. - -`--disable-md5-password' - Omit the MD5 password support in Stage2. - -`--with-binutils=PATH' - Search the path PATH to find binutils. If you have installed your - binutils executables into an unusual location where GCC doesn't - search by default, use this option. - -`--without-curses' - Don't use the curses library. - -`--disable-hercules' - Omit the hercules console support in Stage 2. - -`--disable-serial' - Omit the serial terminal support in Stage 2. - -`--enable-serial-speed-simulation' - Simulate the slowness of a serial device in the grub shell. This - option is useful for GRUB developers, as you can test the - performance of a terminal emulation even on pseudo terminals. - -`--enable-preset-menu=FILE' - Preset a menu file FILE in Stage 2. This is useful, if you cannot - put a configuration file on a filesystem for some reason (e.g. when - you need to set the default terminal to a serial terminal in an - embedded system). - -`--enable-example-kernel' - Build the example Multiboot kernel in the directory "docs". You - will be able to boot the image "kernel" with GRUB. - -`--disable-auto-linux-mem-opt' - Don't pass the "mem=" option automatically, when booting Linux. - You can also disable the feature at run time. - - -`configure' also accepts several options for the network support. See -the file `netboot/README.netboot', for more information. diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 66523662a..000000000 --- a/Makefile.in +++ /dev/null @@ -1,605 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = . -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - THANKS TODO compile config.guess config.sub depcomp install-sh \ - missing mkinstalldirs -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno configure.status.lineno -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-exec-recursive install-info-recursive \ - install-recursive installcheck-recursive installdirs-recursive \ - pdf-recursive ps-recursive uninstall-info-recursive \ - uninstall-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ - -# Do not change this order if you don't know what you are doing. -AUTOMAKE_OPTIONS = 1.7 gnu -SUBDIRS = netboot stage2 stage1 lib grub util docs -EXTRA_DIST = BUGS MAINTENANCE -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ - cd $(srcdir) && $(AUTOMAKE) --gnu \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -uninstall-info-am: - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @set fnord $$MAKEFLAGS; amf=$$2; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -mostlyclean-recursive clean-recursive distclean-recursive \ -maintainer-clean-recursive: - @set fnord $$MAKEFLAGS; amf=$$2; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - mkdir $(distdir) - $(mkdir_p) $(distdir)/util - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(mkdir_p) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - distdir) \ - || exit 1; \ - fi; \ - done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: - -install-exec-am: - -install-info: install-info-recursive - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-info-am - -uninstall-info: uninstall-info-recursive - -.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ - check-am clean clean-generic clean-recursive ctags \ - ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ - dist-tarZ dist-zip distcheck distclean distclean-generic \ - distclean-hdr distclean-recursive distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-exec install-exec-am install-info \ - install-info-am install-man install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic maintainer-clean-recursive \ - mostlyclean mostlyclean-generic mostlyclean-recursive pdf \ - pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ - uninstall-info-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index aa691f618..000000000 --- a/aclocal.m4 +++ /dev/null @@ -1,1061 +0,0 @@ -# generated automatically by aclocal 1.9.4 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -# -*- Autoconf -*- -# Copyright (C) 2002, 2003 Free Software Foundation, Inc. -# Generated from amversion.in; do not edit by hand. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION so it can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.9.4])]) - -# AM_AUX_DIR_EXPAND - -# Copyright (C) 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 6 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE]) -AC_SUBST([$1_FALSE]) -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# serial 7 -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH]) -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -#serial 2 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# This macro actually does too much some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 11 - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.58])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $1 | $1:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. - -# Copyright (C) 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"$am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# -*- Autoconf -*- -# Copyright (C) 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 1 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -# From Jim Meyering - -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004 -# Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -AC_DEFUN([AM_MAINTAINER_MODE], -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl -] -) - -AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# -*- Autoconf -*- - - -# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# AM_PROG_MKDIR_P -# --------------- -# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. - -# Copyright (C) 2003, 2004 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories -# created by `make install' are always world readable, even if the -# installer happens to have an overly restrictive umask (e.g. 077). -# This was a mistake. There are at least two reasons why we must not -# use `-m 0755': -# - it causes special bits like SGID to be ignored, -# - it may be too restrictive (some setups expect 775 directories). -# -# Do not use -m 0755 and let people choose whatever they expect by -# setting umask. -# -# We cannot accept any implementation of `mkdir' that recognizes `-p'. -# Some implementations (such as Solaris 8's) are not thread-safe: if a -# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' -# concurrently, both version can detect that a/ is missing, but only -# one can create it and the other will error out. Consequently we -# restrict ourselves to GNU make (using the --version option ensures -# this.) -AC_DEFUN([AM_PROG_MKDIR_P], -[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi -AC_SUBST([mkdir_p])]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 2 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# -# Check to make sure that the build environment is sane. -# - -# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 3 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# AM_PROG_INSTALL_STRIP - -# Copyright (C) 2001, 2003 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# serial 1 - - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([acinclude.m4]) diff --git a/autogen.sh b/autogen.sh new file mode 100755 index 000000000..c75eadea8 --- /dev/null +++ b/autogen.sh @@ -0,0 +1,9 @@ +#!/bin/sh +set -ex + +aclocal +autoconf +autoheader +automake -a -c -f + +exit 0 diff --git a/config.guess b/config.guess deleted file mode 100644 index 822947132..000000000 --- a/config.guess +++ /dev/null @@ -1,1453 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. - -timestamp='2004-11-12' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit 0 ;; - amd64:OpenBSD:*:*) - echo x86_64-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - cats:OpenBSD:*:*) - echo arm-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - luna88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - macppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvmeppc:OpenBSD:*:*) - echo powerpc-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mips64-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sun3:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit 0 ;; - macppc:MirBSD:*:*) - echo powerppc-unknown-mirbsd${UNAME_RELEASE} - exit 0 ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit 0 ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit 0 ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit 0 ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit 0 ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit 0;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit 0 ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit 0 ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit 0 ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit 0 ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit 0 ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit 0;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit 0;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit 0 ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit 0 ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit 0 ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7 && exit 0 ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - i86pc:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit 0 ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit 0 ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit 0 ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit 0 ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit 0 ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit 0 ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit 0 ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit 0 ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit 0 ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit 0 ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit 0 ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit 0 ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit 0 ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c \ - && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && exit 0 - echo mips-mips-riscos${UNAME_RELEASE} - exit 0 ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit 0 ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit 0 ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit 0 ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit 0 ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit 0 ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit 0 ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit 0 ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit 0 ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit 0 ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit 0 ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit 0 ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit 0 ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit 0 ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit 0 ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 - echo rs6000-ibm-aix3.2.5 - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit 0 ;; - *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit 0 ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit 0 ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit 0 ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit 0 ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit 0 ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit 0 ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit 0 ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - # avoid double evaluation of $set_cc_for_build - test -n "$CC_FOR_BUILD" || eval $set_cc_for_build - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit 0 ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit 0 ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 - echo unknown-hitachi-hiuxwe2 - exit 0 ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit 0 ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit 0 ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit 0 ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit 0 ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit 0 ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit 0 ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit 0 ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit 0 ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit 0 ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit 0 ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit 0 ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit 0 ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit 0 ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit 0 ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit 0 ;; - *:FreeBSD:*:*) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit 0 ;; - i*:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit 0 ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit 0 ;; - x86:Interix*:[34]*) - echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' - exit 0 ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit 0 ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit 0 ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit 0 ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit 0 ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit 0 ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit 0 ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit 0 ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit 0 ;; - arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit 0 ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit 0 ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit 0 ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` - test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 - ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit 0 ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit 0 ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit 0 ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit 0 ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit 0 ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit 0 ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit 0 ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit 0 ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit 0 ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #ifdef __INTEL_COMPILER - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` - test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 - test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit 0 ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit 0 ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit 0 ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit 0 ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit 0 ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit 0 ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit 0 ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit 0 ;; - i*86:*:5:[78]*) - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit 0 ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit 0 ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit 0 ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit 0 ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit 0 ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit 0 ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit 0 ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit 0 ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit 0 ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4.3${OS_REL} && exit 0 - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit 0 ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit 0 ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit 0 ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit 0 ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit 0 ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit 0 ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit 0 ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit 0 ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit 0 ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit 0 ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit 0 ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit 0 ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit 0 ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit 0 ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit 0 ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit 0 ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit 0 ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit 0 ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - *86) UNAME_PROCESSOR=i686 ;; - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit 0 ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit 0 ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit 0 ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit 0 ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit 0 ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit 0 ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit 0 ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit 0 ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit 0 ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit 0 ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit 0 ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit 0 ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit 0 ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit 0 ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit 0 ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit 0 ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms && exit 0 ;; - I*) echo ia64-dec-vms && exit 0 ;; - V*) echo vax-dec-vms && exit 0 ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit 0 ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit 0 ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit 0 ;; - c34*) - echo c34-convex-bsd - exit 0 ;; - c38*) - echo c38-convex-bsd - exit 0 ;; - c4*) - echo c4-convex-bsd - exit 0 ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/config.sub b/config.sub deleted file mode 100644 index 987b17d81..000000000 --- a/config.sub +++ /dev/null @@ -1,1566 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. - -timestamp='2004-11-30' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, -# Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit 0 ;; - --version | -v ) - echo "$version" ; exit 0 ;; - --help | --h* | -h ) - echo "$usage"; exit 0 ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit 0;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \ - kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | msp430 \ - | ns16k | ns32k \ - | openrisc | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \ - | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* \ - | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | msp430-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16c) - basic_machine=cr16c-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - or32 | or32-*) - basic_machine=or32-unknown - os=-coff - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/configure b/configure deleted file mode 100644 index e6a39dcfe..000000000 --- a/configure +++ /dev/null @@ -1,7697 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for GRUB 0.97. -# -# Report bugs to . -# -# Copyright (C) 2003 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME='GRUB' -PACKAGE_TARNAME='grub' -PACKAGE_VERSION='0.97' -PACKAGE_STRING='GRUB 0.97' -PACKAGE_BUGREPORT='bug-grub@gnu.org' - -ac_unique_file="stage2/stage2.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT PERL CC ac_ct_CC CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CCAS RANLIB ac_ct_RANLIB STAGE1_CFLAGS STAGE2_CFLAGS GRUB_CFLAGS OBJCOPY ac_ct_OBJCOPY GRUB_LIBS CPP EGREP NETBOOT_SUPPORT_TRUE NETBOOT_SUPPORT_FALSE DISKLESS_SUPPORT_TRUE DISKLESS_SUPPORT_FALSE HERCULES_SUPPORT_TRUE HERCULES_SUPPORT_FALSE SERIAL_SUPPORT_TRUE SERIAL_SUPPORT_FALSE SERIAL_SPEED_SIMULATION_TRUE SERIAL_SPEED_SIMULATION_FALSE BUILD_EXAMPLE_KERNEL_TRUE BUILD_EXAMPLE_KERNEL_FALSE FSYS_CFLAGS NET_CFLAGS NET_EXTRAFLAGS NETBOOT_DRIVERS CCASFLAGS LIBOBJS LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures GRUB 0.97 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of GRUB 0.97:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --disable-ext2fs disable ext2fs support in Stage 2 - --disable-fat disable FAT support in Stage 2 - --disable-ffs disable FFS support in Stage 2 - --disable-ufs2 disable UFS2 support in Stage 2 - --disable-minix disable Minix fs support in Stage 2 - --disable-reiserfs disable ReiserFS support in Stage 2 - --disable-vstafs disable VSTa FS support in Stage 2 - --disable-jfs disable IBM JFS support in Stage 2 - --disable-xfs disable SGI XFS support in Stage 2 - --disable-iso9660 disable ISO9660 support in Stage 2 - --disable-gunzip disable decompression in Stage 2 - --disable-md5-password disable MD5 password support in Stage 2 - --disable-packet-retransmission - turn off packet retransmission - --enable-pci-direct access PCI directly instead of using BIOS - --enable-3c509 enable 3Com509 driver - --enable-3c529 enable 3Com529 driver - --enable-3c595 enable 3Com595 driver - --enable-3c90x enable 3Com90x driver - --enable-cs89x0 enable CS89x0 driver - --enable-davicom enable Davicom driver - --enable-depca enable DEPCA and EtherWORKS driver - --enable-eepro enable Etherexpress Pro/10 driver - --enable-eepro100 enable Etherexpress Pro/100 driver - --enable-epic100 enable SMC 83c170 EPIC/100 driver - --enable-3c507 enable 3Com507 driver - --enable-exos205 enable EXOS205 driver - --enable-ni5210 enable Racal-Interlan NI5210 driver - --enable-lance enable Lance PCI PCNet/32 driver - --enable-ne2100 enable Novell NE2100 driver - --enable-ni6510 enable Racal-Interlan NI6510 driver - --enable-natsemi enable NatSemi DP8381x driver - --enable-ni5010 enable Racal-Interlan NI5010 driver - --enable-3c503 enable 3Com503 driver - --enable-ne enable NE1000/2000 ISA driver - --enable-ns8390 enable NE2000 PCI driver - --enable-wd enable WD8003/8013, SMC8216/8416 driver - --enable-otulip enable old Tulip driver - --enable-rtl8139 enable Realtek 8139 driver - --enable-sis900 enable SIS 900 and SIS 7016 driver - --enable-sk-g16 enable Schneider and Koch G16 driver - --enable-smc9000 enable SMC9000 driver - --enable-tiara enable Tiara driver - --enable-tulip enable Tulip driver - --enable-via-rhine enable Rhine-I/II driver - --enable-w89c840 enable Winbond W89c840, Compex RL100-ATX driver - --enable-3c503-shmem use 3c503 shared memory mode - --enable-3c503-aui use AUI by default on 3c503 cards - --enable-compex-rl2000-fix - specify this if you have a Compex RL2000 PCI - --enable-smc9000-scan=LIST - probe for SMC9000 I/O addresses using LIST - --enable-ne-scan=LIST probe for NE base address using LIST - --enable-wd-default-mem=MEM - set the default memory location for WD/SMC - --enable-cs-scan=LIST probe for CS89x0 base address using LIST - --enable-diskless enable diskless support - --disable-hercules disable hercules terminal support - --disable-serial disable serial terminal support - --enable-serial-speed-simulation - simulate the slowness of a serial device - --enable-preset-menu=FILE - preset a menu file FILE in Stage 2 - --enable-example-kernel - build the example Multiboot kernel - --disable-auto-linux-mem-opt - don't pass Linux mem= option automatically - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-binutils=DIR search the directory DIR to find binutils - --without-curses do not use curses - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF -GRUB configure 0.97 -generated by GNU Autoconf 2.59 - -Copyright (C) 2003 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by GRUB $as_me 0.97, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ac_config_headers="$ac_config_headers config.h" - -am__api_version="1.9" -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 -echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 -test "$program_prefix" != NONE && - program_transform_name="s,^,$program_prefix,;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s,\$,$program_suffix,;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. -# By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm conftest.sed - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # We used to keeping the `.' as first argument, in order to - # allow $(mkdir_p) to be used without argument. As in - # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. However this is wrong - # for two reasons: - # 1. if the package is installed by a user who cannot write `.' - # make install will fail, - # 2. the above comment should most certainly read - # $(mkdir_p) $(DESTDIR)$(somedir) - # so it does not work when $(somedir) is undefined and - # $(DESTDIR) is not. - # To support the latter case, we have to write - # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), - # so the `.' trick is pointless. - mkdir_p='mkdir -p --' -else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - for d in ./-p ./--version; - do - test -d $d && rmdir $d - done - # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. - if test -f "$ac_aux_dir/mkinstalldirs"; then - mkdir_p='$(mkinstalldirs)' - else - mkdir_p='$(install_sh) -d' - fi -fi - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$AWK" && break -done - -echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="$(MAKE)"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && - test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='grub' - VERSION='0.97' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -install_sh=${install_sh-"$am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STRIP=$ac_ct_STRIP -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - - -# Make sure we can run config.sub. -$ac_config_sub sun4 >/dev/null 2>&1 || - { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 -echo "$as_me: error: cannot run $ac_config_sub" >&2;} - { (exit 1); exit 1; }; } - -echo "$as_me:$LINENO: checking build system type" >&5 -echo $ECHO_N "checking build system type... $ECHO_C" >&6 -if test "${ac_cv_build+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_build_alias=$build_alias -test -z "$ac_cv_build_alias" && - ac_cv_build_alias=`$ac_config_guess` -test -z "$ac_cv_build_alias" && - { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 -echo "$as_me: error: cannot guess build type; you must specify one" >&2;} - { (exit 1); exit 1; }; } -ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_build" >&5 -echo "${ECHO_T}$ac_cv_build" >&6 -build=$ac_cv_build -build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - -echo "$as_me:$LINENO: checking host system type" >&5 -echo $ECHO_N "checking host system type... $ECHO_C" >&6 -if test "${ac_cv_host+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_host_alias=$host_alias -test -z "$ac_cv_host_alias" && - ac_cv_host_alias=$ac_cv_build_alias -ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || - { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 -echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} - { (exit 1); exit 1; }; } - -fi -echo "$as_me:$LINENO: result: $ac_cv_host" >&5 -echo "${ECHO_T}$ac_cv_host" >&6 -host=$ac_cv_host -host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - - - -case "$host_cpu" in -i[3456]86) host_cpu=i386 ;; -x86_64) host_cpu=x86_64 ;; -*) { { echo "$as_me:$LINENO: error: unsupported CPU type" >&5 -echo "$as_me: error: unsupported CPU type" >&2;} - { (exit 1); exit 1; }; } ;; -esac - - - - -# -# Options -# - -echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6 - # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then - enableval="$enable_maintainer_mode" - USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi; - echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6 - - -if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - -if test "x$enable_maintainer_mode" = xyes; then - # Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_PERL+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $PERL in - [\\/]* | ?:[\\/]*) - ac_cv_path_PERL="$PERL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - ;; -esac -fi -PERL=$ac_cv_path_PERL - -if test -n "$PERL"; then - echo "$as_me:$LINENO: result: $PERL" >&5 -echo "${ECHO_T}$PERL" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - if test -z "$PERL"; then - { { echo "$as_me:$LINENO: error: perl not found" >&5 -echo "$as_me: error: perl not found" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -# This should be checked before AC_PROG_CC -if test "x$CFLAGS" = x; then - default_CFLAGS=yes -fi - -if test "x$host_cpu" = xx86_64; then - CFLAGS="-m32 $CFLAGS" -fi - -# -# Programs -# - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" - - ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo done -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 -echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# We grep out `Entering directory' and `Leaving directory' -# messages which can occur if `w' ends up in MAKEFLAGS. -# In particular we don't look at `^make:' because GNU make might -# be invoked under some other name (usually "gmake"), in which -# case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then - am__include=include - am__quote= - _am_result=GNU -fi -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then - am__include=.include - am__quote="\"" - _am_result=BSD - fi -fi - - -echo "$as_me:$LINENO: result: $_am_result" >&5 -echo "${ECHO_T}$_am_result" >&6 -rm -f confinc confmf - -# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then - enableval="$enable_dependency_tracking" - -fi; -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - - -if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - - -depcc="$CC" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - - -if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -# We need this for older versions of Autoconf. - -depcc="$CC" am_compiler_list= - -echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 -echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - case $depmode in - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - none) break ;; - esac - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. - if depmode=$depmode \ - source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 -echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - - -if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - -CCAS="$CC" - - - -# Check whether --with-binutils or --without-binutils was given. -if test "${with_binutils+set}" = set; then - withval="$with_binutils" - -fi; - -if test "x$with_binutils" != x; then - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $RANLIB in - [\\/]* | ?:[\\/]*) - ac_cv_path_RANLIB="$RANLIB" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_dummy=""$with_binutils:$PATH"" -for as_dir in $as_dummy -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_RANLIB="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_path_RANLIB" && ac_cv_path_RANLIB=":" - ;; -esac -fi -RANLIB=$ac_cv_path_RANLIB - -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -else - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -fi - -# optimization flags -if test "x$ac_cv_c_compiler_gnu" = xyes; then - if test "x$default_CFLAGS" = xyes; then - # Autoconf may set CFLAGS to -O2 and/or -g. So eliminate them. - CFLAGS="`echo $CFLAGS | sed -e 's/-g//g' -e 's/-O[0-9]//g'` -g" - # If the user specify the directory for binutils, add the option `-B'. - if test "x$with_binutils" != x; then - CFLAGS="-B$with_binutils/ $CFLAGS" - fi - STAGE1_CFLAGS="-O2" - GRUB_CFLAGS="-O2" - -echo "$as_me:$LINENO: checking whether optimization for size works" >&5 -echo $ECHO_N "checking whether optimization for size works... $ECHO_C" >&6 -if test "${size_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - saved_CFLAGS=$CFLAGS - CFLAGS="-Os -g" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - size_flag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -size_flag=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$saved_CFLAGS - -fi -echo "$as_me:$LINENO: result: $size_flag" >&5 -echo "${ECHO_T}$size_flag" >&6 - if test "x$size_flag" = xyes; then - STAGE2_CFLAGS="-Os" - else - STAGE2_CFLAGS="-O2 -fno-strength-reduce -fno-unroll-loops" - fi - # OpenBSD has a GCC extension for protecting applications from - # stack smashing attacks, but GRUB doesn't want this feature. - echo "$as_me:$LINENO: checking whether gcc has -fno-stack-protector" >&5 -echo $ECHO_N "checking whether gcc has -fno-stack-protector... $ECHO_C" >&6 -if test "${no_stack_protector_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - saved_CFLAGS=$CFLAGS - CFLAGS="-fno-stack-protector" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - no_stack_protector_flag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -no_stack_protector_flag=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$saved_CFLAGS - -fi -echo "$as_me:$LINENO: result: $no_stack_protector_flag" >&5 -echo "${ECHO_T}$no_stack_protector_flag" >&6 - if test "x$no_stack_protector_flag" = xyes; then - STAGE2_CFLAGS="$STAGE2_CFLAGS -fno-stack-protector" - fi - fi -fi - - - - - -# Enforce coding standards. -CPPFLAGS="$CPPFLAGS -Wall -Wmissing-prototypes -Wunused -Wshadow" -CPPFLAGS="$CPPFLAGS -Wpointer-arith" - -echo "$as_me:$LINENO: checking whether -Wundef works" >&5 -echo $ECHO_N "checking whether -Wundef works... $ECHO_C" >&6 -if test "${undef_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - saved_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="-Wundef" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - undef_flag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -undef_flag=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - CPPFLAGS="$saved_CPPFLAGS" - -fi -echo "$as_me:$LINENO: result: $undef_flag" >&5 -echo "${ECHO_T}$undef_flag" >&6 - -# The options `-falign-*' are supported by gcc 3.0 or later. -# Probably it is sufficient to only check for -falign-loops. -echo "$as_me:$LINENO: checking whether -falign-loops works" >&5 -echo $ECHO_N "checking whether -falign-loops works... $ECHO_C" >&6 -if test "${falign_loop_flag+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - saved_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="-falign-loops=1" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - falign_loop_flag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -falign_loop_flag=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - CPPFLAGS="$saved_CPPFLAGS" - -fi -echo "$as_me:$LINENO: result: $falign_loop_flag" >&5 -echo "${ECHO_T}$falign_loop_flag" >&6 - -# Force no alignment to save space. -if test "x$falign_loop_flag" = xyes; then - CPPFLAGS="$CPPFLAGS -falign-jumps=1 -falign-loops=1 -falign-functions=1" -else - CPPFLAGS="$CPPFLAGS -malign-jumps=1 -malign-loops=1 -malign-functions=1" -fi - -if test "x$undef_flag" = xyes; then - CPPFLAGS="$CPPFLAGS -Wundef" -fi - -# Check if build ID can be disabled in the linker -echo "$as_me:$LINENO: checking whether linker accepts \`--build-id=none'" >&5 -echo $ECHO_N "checking whether linker accepts \`--build-id=none'... $ECHO_C" >&6 -save_LDFLAGS="$LDFLAGS" -LDFLAGS="$LDFLAGS -Wl,--build-id=none" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - build_id_flag=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -build_id_flag=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -echo "$as_me:$LINENO: result: $build_id_flag" >&5 -echo "${ECHO_T}$build_id_flag" >&6 -LDFLAGS="$save_LDFLAGS" -if test "x$build_id_flag" = xyes; then - LDFLAGS="$LDFLAGS -Wl,--build-id=none" -fi - -if test "x$with_binutils" != x; then - # Extract the first word of "objcopy", so it can be a program name with args. -set dummy objcopy; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_path_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - case $OBJCOPY in - [\\/]* | ?:[\\/]*) - ac_cv_path_OBJCOPY="$OBJCOPY" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_dummy=""$with_binutils:$PATH"" -for as_dir in $as_dummy -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_OBJCOPY="$as_dir/$ac_word$ac_exec_ext" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - ;; -esac -fi -OBJCOPY=$ac_cv_path_OBJCOPY - -if test -n "$OBJCOPY"; then - echo "$as_me:$LINENO: result: $OBJCOPY" >&5 -echo "${ECHO_T}$OBJCOPY" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -else - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objcopy", so it can be a program name with args. -set dummy ${ac_tool_prefix}objcopy; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$OBJCOPY"; then - ac_cv_prog_OBJCOPY="$OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJCOPY="${ac_tool_prefix}objcopy" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -OBJCOPY=$ac_cv_prog_OBJCOPY -if test -n "$OBJCOPY"; then - echo "$as_me:$LINENO: result: $OBJCOPY" >&5 -echo "${ECHO_T}$OBJCOPY" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_OBJCOPY"; then - ac_ct_OBJCOPY=$OBJCOPY - # Extract the first word of "objcopy", so it can be a program name with args. -set dummy objcopy; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_OBJCOPY+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_OBJCOPY"; then - ac_cv_prog_ac_ct_OBJCOPY="$ac_ct_OBJCOPY" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJCOPY="objcopy" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_OBJCOPY=$ac_cv_prog_ac_ct_OBJCOPY -if test -n "$ac_ct_OBJCOPY"; then - echo "$as_me:$LINENO: result: $ac_ct_OBJCOPY" >&5 -echo "${ECHO_T}$ac_ct_OBJCOPY" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - OBJCOPY=$ac_ct_OBJCOPY -else - OBJCOPY="$ac_cv_prog_OBJCOPY" -fi - -fi - -# Defined in acinclude.m4. - -echo "$as_me:$LINENO: checking if C symbols get an underscore after compilation" >&5 -echo $ECHO_N "checking if C symbols get an underscore after compilation... $ECHO_C" >&6 -if test "${grub_cv_asm_uscore+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.c <<\EOF -int -func (int *list) -{ - *list = 0; - return *list; -} -EOF - -if { ac_try='${CC-cc} ${CFLAGS} -S conftest.c' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && test -s conftest.s; then - true -else - { { echo "$as_me:$LINENO: error: ${CC-cc} failed to produce assembly code" >&5 -echo "$as_me: error: ${CC-cc} failed to produce assembly code" >&2;} - { (exit 1); exit 1; }; } -fi - -if grep _func conftest.s >/dev/null 2>&1; then - grub_cv_asm_uscore=yes -else - grub_cv_asm_uscore=no -fi - -rm -f conftest* -fi - - -if test "x$grub_cv_asm_uscore" = xyes; then - -cat >>confdefs.h <<_ACEOF -#define HAVE_ASM_USCORE $grub_cv_asm_uscore -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_asm_uscore" >&5 -echo "${ECHO_T}$grub_cv_asm_uscore" >&6 - -echo "$as_me:$LINENO: checking whether ${OBJCOPY} works for absolute addresses" >&5 -echo $ECHO_N "checking whether ${OBJCOPY} works for absolute addresses... $ECHO_C" >&6 -if test "${grub_cv_prog_objcopy_absolute+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.c <<\EOF -void -cmain (void) -{ - *((int *) 0x1000) = 2; -} -EOF - -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && test -s conftest.o; then : -else - { { echo "$as_me:$LINENO: error: ${CC-cc} cannot compile C source code" >&5 -echo "$as_me: error: ${CC-cc} cannot compile C source code" >&2;} - { (exit 1); exit 1; }; } -fi -grub_cv_prog_objcopy_absolute=yes -for link_addr in 2000 8000 7C00; do - if { ac_try='${CC-cc} ${CFLAGS} ${LDFLAGS} -nostdlib -Wl,-N -Wl,-Ttext -Wl,$link_addr conftest.o -o conftest.exec' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then : - else - { { echo "$as_me:$LINENO: error: ${CC-cc} cannot link at address $link_addr" >&5 -echo "$as_me: error: ${CC-cc} cannot link at address $link_addr" >&2;} - { (exit 1); exit 1; }; } - fi - if { ac_try='${OBJCOPY-objcopy} -O binary conftest.exec conftest' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then : - else - { { echo "$as_me:$LINENO: error: ${OBJCOPY-objcopy} cannot create binary files" >&5 -echo "$as_me: error: ${OBJCOPY-objcopy} cannot create binary files" >&2;} - { (exit 1); exit 1; }; } - fi - if test ! -f conftest.old || { ac_try='cmp -s conftest.old conftest' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - mv -f conftest conftest.old - else - grub_cv_prog_objcopy_absolute=no - break - fi -done -rm -f conftest* -fi - -echo "$as_me:$LINENO: result: $grub_cv_prog_objcopy_absolute" >&5 -echo "${ECHO_T}$grub_cv_prog_objcopy_absolute" >&6 -if test "x$grub_cv_prog_objcopy_absolute" != xyes; then - { { echo "$as_me:$LINENO: error: GRUB requires a working absolute objcopy; upgrade your binutils" >&5 -echo "$as_me: error: GRUB requires a working absolute objcopy; upgrade your binutils" >&2;} - { (exit 1); exit 1; }; } -fi - - -echo "$as_me:$LINENO: checking whether addr32 must be in the same line as the instruction" >&5 -echo $ECHO_N "checking whether addr32 must be in the same line as the instruction... $ECHO_C" >&6 -if test "${grub_cv_asm_prefix_requirement+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.s <<\EOF - .code16 -l1: addr32 movb %al, l1 -EOF - -if { ac_try='${CC-cc} ${CFLAGS} -c conftest.s' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && test -s conftest.o; then - grub_cv_asm_prefix_requirement=yes -else - grub_cv_asm_prefix_requirement=no -fi - -rm -f conftest* -fi - - -if test "x$grub_cv_asm_prefix_requirement" = xyes; then - grub_tmp_addr32="addr32" - grub_tmp_data32="data32" -else - grub_tmp_addr32="addr32;" - grub_tmp_data32="data32;" -fi - - -cat >>confdefs.h <<_ACEOF -#define ADDR32 $grub_tmp_addr32 -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define DATA32 $grub_tmp_data32 -_ACEOF - - -echo "$as_me:$LINENO: result: $grub_cv_asm_prefix_requirement" >&5 -echo "${ECHO_T}$grub_cv_asm_prefix_requirement" >&6 - - - -echo "$as_me:$LINENO: checking for .code16 addr32 assembler support" >&5 -echo $ECHO_N "checking for .code16 addr32 assembler support... $ECHO_C" >&6 -if test "${grub_cv_asm_addr32+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.s.in <<\EOF - .code16 -l1: @ADDR32@ movb %al, l1 -EOF - -if test "x$grub_cv_asm_prefix_requirement" = xyes; then - sed -e s/@ADDR32@/addr32/ < conftest.s.in > conftest.s -else - sed -e s/@ADDR32@/addr32\;/ < conftest.s.in > conftest.s -fi - -if { ac_try='${CC-cc} ${CFLAGS} -c conftest.s' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && test -s conftest.o; then - grub_cv_asm_addr32=yes -else - grub_cv_asm_addr32=no -fi - -rm -f conftest* -fi - - -echo "$as_me:$LINENO: result: $grub_cv_asm_addr32" >&5 -echo "${ECHO_T}$grub_cv_asm_addr32" >&6 -if test "x$grub_cv_asm_addr32" != xyes; then - { { echo "$as_me:$LINENO: error: GRUB requires GAS .code16 addr32 support; upgrade your binutils" >&5 -echo "$as_me: error: GRUB requires GAS .code16 addr32 support; upgrade your binutils" >&2;} - { (exit 1); exit 1; }; } -fi - - -echo "$as_me:$LINENO: checking whether an absolute indirect call/jump must not be prefixed with an asterisk" >&5 -echo $ECHO_N "checking whether an absolute indirect call/jump must not be prefixed with an asterisk... $ECHO_C" >&6 -if test "${grub_cv_asm_absolute_without_asterisk+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat > conftest.s <<\EOF - lcall *(offset) -offset: - .long 0 - .word 0 -EOF - -if { ac_try='${CC-cc} ${CFLAGS} -c conftest.s' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && test -s conftest.o; then - grub_cv_asm_absolute_without_asterisk=no -else - grub_cv_asm_absolute_without_asterisk=yes -fi - -rm -f conftest* -fi - - -if test "x$grub_cv_asm_absolute_without_asterisk" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define ABSOLUTE_WITHOUT_ASTERISK 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_asm_absolute_without_asterisk" >&5 -echo "${ECHO_T}$grub_cv_asm_absolute_without_asterisk" >&6 - - -echo "$as_me:$LINENO: checking if start is defined by the compiler" >&5 -echo $ECHO_N "checking if start is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_start_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl start") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_start_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_start_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_start_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_START_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_start_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_start_symbol" >&6 - - -echo "$as_me:$LINENO: checking if _start is defined by the compiler" >&5 -echo $ECHO_N "checking if _start is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_uscore_start_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl _start") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_uscore_start_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_uscore_start_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_uscore_start_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_USCORE_START_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_uscore_start_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_uscore_start_symbol" >&6 - -if test "x$grub_cv_check_start_symbol" != "xyes" \ - -a "x$grub_cv_check_uscore_start_symbol" != "xyes"; then - { { echo "$as_me:$LINENO: error: Neither start nor _start is defined" >&5 -echo "$as_me: error: Neither start nor _start is defined" >&2;} - { (exit 1); exit 1; }; } -fi - - -echo "$as_me:$LINENO: checking if __bss_start is defined by the compiler" >&5 -echo $ECHO_N "checking if __bss_start is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_uscore_uscore_bss_start_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl __bss_start") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_uscore_uscore_bss_start_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_uscore_uscore_bss_start_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_uscore_uscore_bss_start_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_USCORE_USCORE_BSS_START_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_uscore_uscore_bss_start_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_uscore_uscore_bss_start_symbol" >&6 - - -echo "$as_me:$LINENO: checking if _edata is defined by the compiler" >&5 -echo $ECHO_N "checking if _edata is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_uscore_edata_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl _edata") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_uscore_edata_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_uscore_edata_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_uscore_edata_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_USCORE_EDATA_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_uscore_edata_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_uscore_edata_symbol" >&6 - - -echo "$as_me:$LINENO: checking if edata is defined by the compiler" >&5 -echo $ECHO_N "checking if edata is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_edata_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl edata") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_edata_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_edata_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_edata_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_EDATA_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_edata_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_edata_symbol" >&6 - -if test "x$grub_cv_check_uscore_uscore_bss_start_symbol" != "xyes" \ - -a "x$grub_cv_check_uscore_edata_symbol" != "xyes" \ - -a "x$grub_cv_check_edata_symbol" != "xyes"; then - { { echo "$as_me:$LINENO: error: None of __bss_start, _edata, edata defined" >&5 -echo "$as_me: error: None of __bss_start, _edata, edata defined" >&2;} - { (exit 1); exit 1; }; } -fi - - -echo "$as_me:$LINENO: checking if end is defined by the compiler" >&5 -echo $ECHO_N "checking if end is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_end_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl end") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_end_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_end_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_end_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_END_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_end_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_end_symbol" >&6 - - -echo "$as_me:$LINENO: checking if _end is defined by the compiler" >&5 -echo $ECHO_N "checking if _end is defined by the compiler... $ECHO_C" >&6 -if test "${grub_cv_check_uscore_end_symbol+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -asm ("incl _end") - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - grub_cv_check_uscore_end_symbol=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -grub_cv_check_uscore_end_symbol=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - - -if test "x$grub_cv_check_uscore_end_symbol" = xyes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_USCORE_END_SYMBOL 1 -_ACEOF - -fi - -echo "$as_me:$LINENO: result: $grub_cv_check_uscore_end_symbol" >&5 -echo "${ECHO_T}$grub_cv_check_uscore_end_symbol" >&6 - -if test "x$grub_cv_check_end_symbol" != "xyes" \ - -a "x$grub_cv_check_uscore_end_symbol" != "xyes"; then - { { echo "$as_me:$LINENO: error: Neither end nor _end is defined" >&5 -echo "$as_me: error: Neither end nor _end is defined" >&2;} - { (exit 1); exit 1; }; } -fi - -# Check for curses libraries. - -# Check whether --with-curses or --without-curses was given. -if test "${with_curses+set}" = set; then - withval="$with_curses" - -fi; - -# Get the filename or the whole disk and open it. -# Known to work on NetBSD. -echo "$as_me:$LINENO: checking for opendisk in -lutil" >&5 -echo $ECHO_N "checking for opendisk in -lutil... $ECHO_C" >&6 -if test "${ac_cv_lib_util_opendisk+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lutil $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char opendisk (); -int -main () -{ -opendisk (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_util_opendisk=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_util_opendisk=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_util_opendisk" >&5 -echo "${ECHO_T}$ac_cv_lib_util_opendisk" >&6 -if test $ac_cv_lib_util_opendisk = yes; then - GRUB_LIBS="$GRUB_LIBS -lutil" - -cat >>confdefs.h <<\_ACEOF -#define HAVE_OPENDISK 1 -_ACEOF - -fi - - -# Unless the user specify --without-curses, check for curses. -if test "x$with_curses" != "xno"; then - echo "$as_me:$LINENO: checking for wgetch in -lncurses" >&5 -echo $ECHO_N "checking for wgetch in -lncurses... $ECHO_C" >&6 -if test "${ac_cv_lib_ncurses_wgetch+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lncurses $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char wgetch (); -int -main () -{ -wgetch (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ncurses_wgetch=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ncurses_wgetch=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_wgetch" >&5 -echo "${ECHO_T}$ac_cv_lib_ncurses_wgetch" >&6 -if test $ac_cv_lib_ncurses_wgetch = yes; then - GRUB_LIBS="$GRUB_LIBS -lncurses" - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBCURSES 1 -_ACEOF - -else - echo "$as_me:$LINENO: checking for wgetch in -lcurses" >&5 -echo $ECHO_N "checking for wgetch in -lcurses... $ECHO_C" >&6 -if test "${ac_cv_lib_curses_wgetch+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lcurses $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char wgetch (); -int -main () -{ -wgetch (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_curses_wgetch=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_curses_wgetch=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_curses_wgetch" >&5 -echo "${ECHO_T}$ac_cv_lib_curses_wgetch" >&6 -if test $ac_cv_lib_curses_wgetch = yes; then - GRUB_LIBS="$GRUB_LIBS -lcurses" - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIBCURSES 1 -_ACEOF - -fi - -fi - -fi - - - -# Check for headers. -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - - - - -for ac_header in string.h strings.h ncurses/curses.h ncurses.h curses.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------- ## -## Report this to bug-grub@gnu.org ## -## ------------------------------- ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -# Check for user options. - -# filesystems support. -# Check whether --enable-ext2fs or --disable-ext2fs was given. -if test "${enable_ext2fs+set}" = set; then - enableval="$enable_ext2fs" - -fi; - -if test x"$enable_ext2fs" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_EXT2FS=1" -fi - -# Check whether --enable-fat or --disable-fat was given. -if test "${enable_fat+set}" = set; then - enableval="$enable_fat" - -fi; - -if test x"$enable_fat" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_FAT=1" -fi - -# Check whether --enable-ffs or --disable-ffs was given. -if test "${enable_ffs+set}" = set; then - enableval="$enable_ffs" - -fi; - -if test x"$enable_ffs" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_FFS=1" -fi - -# Check whether --enable-ufs2 or --disable-ufs2 was given. -if test "${enable_ufs2+set}" = set; then - enableval="$enable_ufs2" - -fi; - -if test x"$enable_ufs2" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_UFS2=1" -fi - -# Check whether --enable-minix or --disable-minix was given. -if test "${enable_minix+set}" = set; then - enableval="$enable_minix" - -fi; - -if test x"$enable_minix" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_MINIX=1" -fi - -# Check whether --enable-reiserfs or --disable-reiserfs was given. -if test "${enable_reiserfs+set}" = set; then - enableval="$enable_reiserfs" - -fi; - -if test x"$enable_reiserfs" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_REISERFS=1" -fi - -# Check whether --enable-vstafs or --disable-vstafs was given. -if test "${enable_vstafs+set}" = set; then - enableval="$enable_vstafs" - -fi; - -if test x"$enable_vstafs" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_VSTAFS=1" -fi - -# Check whether --enable-jfs or --disable-jfs was given. -if test "${enable_jfs+set}" = set; then - enableval="$enable_jfs" - -fi; - -if test x"$enable_jfs" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_JFS=1" -fi - -# Check whether --enable-xfs or --disable-xfs was given. -if test "${enable_xfs+set}" = set; then - enableval="$enable_xfs" - -fi; - -if test x"$enable_xfs" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_XFS=1" -fi - -# Check whether --enable-iso9660 or --disable-iso9660 was given. -if test "${enable_iso9660+set}" = set; then - enableval="$enable_iso9660" - -fi; - -if test x"$enable_iso9660" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_ISO9660=1" -fi - - -# Check whether --enable-gunzip or --disable-gunzip was given. -if test "${enable_gunzip+set}" = set; then - enableval="$enable_gunzip" - -fi; - -if test x"$enable_gunzip" = xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DNO_DECOMPRESSION=1" -fi - -# Check whether --enable-md5-password or --disable-md5-password was given. -if test "${enable_md5_password+set}" = set; then - enableval="$enable_md5_password" - -fi; -if test "x$enable_md5_password" != xno; then - FSYS_CFLAGS="$FSYS_CFLAGS -DUSE_MD5_PASSWORDS=1" -fi - -# Check whether --enable-packet-retransmission or --disable-packet-retransmission was given. -if test "${enable_packet_retransmission+set}" = set; then - enableval="$enable_packet_retransmission" - -fi; -if test "x$enable_packet_retransmission" != xno; then - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONGESTED=1" -fi - -# Check whether --enable-pci-direct or --disable-pci-direct was given. -if test "${enable_pci_direct+set}" = set; then - enableval="$enable_pci_direct" - -fi; -if test "x$enable_pci_direct" = xyes; then - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCONFIG_PCI_DIRECT=1" -fi - -# Check whether --enable-3c509 or --disable-3c509 was given. -if test "${enable_3c509+set}" = set; then - enableval="$enable_3c509" - -fi; -if test "x$enable_3c509" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C509" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c509.o" -fi - -# Check whether --enable-3c529 or --disable-3c529 was given. -if test "${enable_3c529+set}" = set; then - enableval="$enable_3c529" - -fi; -if test "x$enable_3c529" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C529=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c529.o" -fi - -# Check whether --enable-3c595 or --disable-3c595 was given. -if test "${enable_3c595+set}" = set; then - enableval="$enable_3c595" - -fi; -if test "x$enable_3c595" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C595=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c595.o" -fi - -# Check whether --enable-3c90x or --disable-3c90x was given. -if test "${enable_3c90x+set}" = set; then - enableval="$enable_3c90x" - -fi; -if test "x$enable_3c90x" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C90X=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c90x.o" -fi - -# Check whether --enable-cs89x0 or --disable-cs89x0 was given. -if test "${enable_cs89x0+set}" = set; then - enableval="$enable_cs89x0" - -fi; -if test "x$enable_cs89x0" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_CS89X0=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS cs89x0.o" -fi - -# Check whether --enable-davicom or --disable-davicom was given. -if test "${enable_davicom+set}" = set; then - enableval="$enable_davicom" - -fi; -if test "x$enable_davicom" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DAVICOM=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS davicom.o" -fi - -# Check whether --enable-depca or --disable-depca was given. -if test "${enable_depca+set}" = set; then - enableval="$enable_depca" - -fi; -if test "x$enable_depca" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_DEPCA=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS depca.o" -fi - -# Check whether --enable-eepro or --disable-eepro was given. -if test "${enable_eepro+set}" = set; then - enableval="$enable_eepro" - -fi; -if test "x$enable_eepro" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro.o" -fi - -# Check whether --enable-eepro100 or --disable-eepro100 was given. -if test "${enable_eepro100+set}" = set; then - enableval="$enable_eepro100" - -fi; -if test "x$enable_eepro100" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EEPRO100=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS eepro100.o" -fi - -# Check whether --enable-epic100 or --disable-epic100 was given. -if test "${enable_epic100+set}" = set; then - enableval="$enable_epic100" - -fi; -if test "x$enable_epic100" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EPIC100=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS epic100.o" -fi - -# Check whether --enable-3c507 or --disable-3c507 was given. -if test "${enable_3c507+set}" = set; then - enableval="$enable_3c507" - -fi; -if test "x$enable_3c507" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C507=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c507.o" -fi - -# Check whether --enable-exos205 or --disable-exos205 was given. -if test "${enable_exos205+set}" = set; then - enableval="$enable_exos205" - -fi; -if test "x$enable_exos205" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_EXOS205=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS exos205.o" -fi - -# Check whether --enable-ni5210 or --disable-ni5210 was given. -if test "${enable_ni5210+set}" = set; then - enableval="$enable_ni5210" - -fi; -if test "x$enable_ni5210" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5210=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5210.o" -fi - -# Check whether --enable-lance or --disable-lance was given. -if test "${enable_lance+set}" = set; then - enableval="$enable_lance" - -fi; -if test "x$enable_lance" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_LANCE=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS lance.o" -fi - -# Check whether --enable-ne2100 or --disable-ne2100 was given. -if test "${enable_ne2100+set}" = set; then - enableval="$enable_ne2100" - -fi; -if test "x$enable_ne2100" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE2100=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne2100.o" -fi - -# Check whether --enable-ni6510 or --disable-ni6510 was given. -if test "${enable_ni6510+set}" = set; then - enableval="$enable_ni6510" - -fi; -if test "x$enable_ni6510" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI6510=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni6510.o" -fi - -# Check whether --enable-natsemi or --disable-natsemi was given. -if test "${enable_natsemi+set}" = set; then - enableval="$enable_natsemi" - -fi; -if test "x$enable_natsemi" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NATSEMI=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS natsemi.o" -fi - -# Check whether --enable-ni5010 or --disable-ni5010 was given. -if test "${enable_ni5010+set}" = set; then - enableval="$enable_ni5010" - -fi; -if test "x$enable_ni5010" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NI5010=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS ni5010.o" -fi - -# Check whether --enable-3c503 or --disable-3c503 was given. -if test "${enable_3c503+set}" = set; then - enableval="$enable_3c503" - -fi; -if test "x$enable_3c503" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_3C503=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS 3c503.o" -fi - -# Check whether --enable-ne or --disable-ne was given. -if test "${enable_ne+set}" = set; then - enableval="$enable_ne" - -fi; -if test "x$enable_ne" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NE=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS ne.o" -fi - -# Check whether --enable-ns8390 or --disable-ns8390 was given. -if test "${enable_ns8390+set}" = set; then - enableval="$enable_ns8390" - -fi; -if test "x$enable_ns8390" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_NS8390=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS ns8390.o" -fi - -# Check whether --enable-wd or --disable-wd was given. -if test "${enable_wd+set}" = set; then - enableval="$enable_wd" - -fi; -if test "x$enable_wd" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_WD=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS wd.o" -fi - -# Check whether --enable-otulip or --disable-otulip was given. -if test "${enable_otulip+set}" = set; then - enableval="$enable_otulip" - -fi; -if test "x$enable_otulip" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_OTULIP=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS otulip.o" -fi - -# Check whether --enable-rtl8139 or --disable-rtl8139 was given. -if test "${enable_rtl8139+set}" = set; then - enableval="$enable_rtl8139" - -fi; -if test "x$enable_rtl8139" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_RTL8139=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS rtl8139.o" -fi - -# Check whether --enable-sis900 or --disable-sis900 was given. -if test "${enable_sis900+set}" = set; then - enableval="$enable_sis900" - -fi; -if test "x$enable_sis900" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SIS900=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS sis900.o" -fi - -# Check whether --enable-sk-g16 or --disable-sk-g16 was given. -if test "${enable_sk_g16+set}" = set; then - enableval="$enable_sk_g16" - -fi; -if test "x$enable_sk_g16" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SK_G16=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS sk_g16.o" -fi - -# Check whether --enable-smc9000 or --disable-smc9000 was given. -if test "${enable_smc9000+set}" = set; then - enableval="$enable_smc9000" - -fi; -if test "x$enable_smc9000" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_SMC9000=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS smc9000.o" -fi - -# Check whether --enable-tiara or --disable-tiara was given. -if test "${enable_tiara+set}" = set; then - enableval="$enable_tiara" - -fi; -if test "x$enable_tiara" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TIARA=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS tiara.o" -fi - -# Check whether --enable-tulip or --disable-tulip was given. -if test "${enable_tulip+set}" = set; then - enableval="$enable_tulip" - -fi; -if test "x$enable_tulip" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_TULIP=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS tulip.o" -fi - -# Check whether --enable-via-rhine or --disable-via-rhine was given. -if test "${enable_via_rhine+set}" = set; then - enableval="$enable_via_rhine" - -fi; -if test "x$enable_via_rhine" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_VIA_RHINE=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS via_rhine.o" -fi - -# Check whether --enable-w89c840 or --disable-w89c840 was given. -if test "${enable_w89c840+set}" = set; then - enableval="$enable_w89c840" - -fi; -if test "x$enable_w89c840" = xyes; then - NET_CFLAGS="$NET_CFLAGS -DINCLUDE_W89C840=1" - NETBOOT_DRIVERS="$NETBOOT_DRIVERS w89c840.o" -fi - - - -if test "x$NET_CFLAGS" != x; then - NETBOOT_SUPPORT_TRUE= - NETBOOT_SUPPORT_FALSE='#' -else - NETBOOT_SUPPORT_TRUE='#' - NETBOOT_SUPPORT_FALSE= -fi - -if test "x$NET_CFLAGS" != x; then - FSYS_CFLAGS="$FSYS_CFLAGS -DFSYS_TFTP=1" -fi - -# Check whether --enable-3c503-shmem or --disable-3c503-shmem was given. -if test "${enable_3c503_shmem+set}" = set; then - enableval="$enable_3c503_shmem" - -fi; -if test "x$enable_3c503_shmem" = xyes; then - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_SHMEM=1" -fi - -# Check whether --enable-3c503-aui or --disable-3c503-aui was given. -if test "${enable_3c503_aui+set}" = set; then - enableval="$enable_3c503_aui" - -fi; -if test "x$enable_3c503_aui" = xyes; then - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DT503_AUI=1" -fi - -# Check whether --enable-compex-rl2000-fix or --disable-compex-rl2000-fix was given. -if test "${enable_compex_rl2000_fix+set}" = set; then - enableval="$enable_compex_rl2000_fix" - -fi; -if test "x$enable_compex_rl2000_fix" = xyes; then - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCOMPEX_RL2000_FIX=1" -fi - -# Check whether --enable-smc9000-scan or --disable-smc9000-scan was given. -if test "${enable_smc9000_scan+set}" = set; then - enableval="$enable_smc9000_scan" - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DSMC9000_SCAN=$enable_smc9000_scan" -fi; - -# Check whether --enable-ne-scan or --disable-ne-scan was given. -if test "${enable_ne_scan+set}" = set; then - enableval="$enable_ne_scan" - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=$enable_ne_scan" -else - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DNE_SCAN=0x280,0x300,0x320,0x340" -fi; - -# Check whether --enable-wd-default-mem or --disable-wd-default-mem was given. -if test "${enable_wd_default_mem+set}" = set; then - enableval="$enable_wd_default_mem" - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=$enable_wd_default_mem" -else - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DWD_DEFAULT_MEM=0xCC000" -fi; - -# Check whether --enable-cs-scan or --disable-cs-scan was given. -if test "${enable_cs_scan+set}" = set; then - enableval="$enable_cs_scan" - NET_EXTRAFLAGS="$NET_EXTRAFLAGS -DCS_SCAN=$enable_cs_scan" -fi; - -# Check whether --enable-diskless or --disable-diskless was given. -if test "${enable_diskless+set}" = set; then - enableval="$enable_diskless" - -fi; - - -if test "x$enable_diskless" = xyes; then - DISKLESS_SUPPORT_TRUE= - DISKLESS_SUPPORT_FALSE='#' -else - DISKLESS_SUPPORT_TRUE='#' - DISKLESS_SUPPORT_FALSE= -fi - - -# Check whether --enable-hercules or --disable-hercules was given. -if test "${enable_hercules+set}" = set; then - enableval="$enable_hercules" - -fi; - - -if test "x$enable_hercules" != xno; then - HERCULES_SUPPORT_TRUE= - HERCULES_SUPPORT_FALSE='#' -else - HERCULES_SUPPORT_TRUE='#' - HERCULES_SUPPORT_FALSE= -fi - - -# Check whether --enable-serial or --disable-serial was given. -if test "${enable_serial+set}" = set; then - enableval="$enable_serial" - -fi; - - -if test "x$enable_serial" != xno; then - SERIAL_SUPPORT_TRUE= - SERIAL_SUPPORT_FALSE='#' -else - SERIAL_SUPPORT_TRUE='#' - SERIAL_SUPPORT_FALSE= -fi - - -# Check whether --enable-serial-speed-simulation or --disable-serial-speed-simulation was given. -if test "${enable_serial_speed_simulation+set}" = set; then - enableval="$enable_serial_speed_simulation" - -fi; - - -if test "x$enable_serial_speed_simulation" = xyes; then - SERIAL_SPEED_SIMULATION_TRUE= - SERIAL_SPEED_SIMULATION_FALSE='#' -else - SERIAL_SPEED_SIMULATION_TRUE='#' - SERIAL_SPEED_SIMULATION_FALSE= -fi - - -# Sanity check. -if test "x$enable_diskless" = xyes; then - if test "x$NET_CFLAGS" = x; then - { { echo "$as_me:$LINENO: error: You must enable at least one network driver" >&5 -echo "$as_me: error: You must enable at least one network driver" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -# Check whether --enable-preset-menu or --disable-preset-menu was given. -if test "${enable_preset_menu+set}" = set; then - enableval="$enable_preset_menu" - -fi; -if test "x$enable_preset_menu" = x; then - : -else - if test -r $enable_preset_menu; then - -# Because early versions of GNU sed 3.x are too buggy, use a C program -# instead of shell commands. *sigh* -cat >conftest.c <<\EOF -#include - -int -main (void) -{ - int c; - - while ((c = getchar ()) != EOF) - { - switch (c) - { - case '\n': - fputs ("\\n", stdout); - break; - case '\r': - fputs ("\\r", stdout); - break; - case '\\': - fputs ("\\\\", stdout); - break; - case '"': - fputs ("\\\"", stdout); - break; - default: - putchar (c); - } - } - - return 0; -} -EOF - -if { ac_try='${CC-cc} ${CFLAGS} conftest.c -o conftest' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && test -s conftest; then - grub_tmp_value=`./conftest < "$enable_preset_menu"` -else - { { echo "$as_me:$LINENO: error: ${CC-cc} failed to produce an executable file" >&5 -echo "$as_me: error: ${CC-cc} failed to produce an executable file" >&2;} - { (exit 1); exit 1; }; } -fi - - -cat >>confdefs.h <<_ACEOF -#define PRESET_MENU_STRING "$grub_tmp_value" -_ACEOF - -rm -f conftest* - - else - { { echo "$as_me:$LINENO: error: Cannot read the preset menu file $enable_preset_menu" >&5 -echo "$as_me: error: Cannot read the preset menu file $enable_preset_menu" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -# Check whether --enable-example-kernel or --disable-example-kernel was given. -if test "${enable_example_kernel+set}" = set; then - enableval="$enable_example_kernel" - -fi; - - -if test "x$enable_example_kernel" = xyes; then - BUILD_EXAMPLE_KERNEL_TRUE= - BUILD_EXAMPLE_KERNEL_FALSE='#' -else - BUILD_EXAMPLE_KERNEL_TRUE='#' - BUILD_EXAMPLE_KERNEL_FALSE= -fi - - -# Check whether --enable-auto-linux-mem-opt or --disable-auto-linux-mem-opt was given. -if test "${enable_auto_linux_mem_opt+set}" = set; then - enableval="$enable_auto_linux_mem_opt" - -fi; -if test "x$enable_auto_linux_mem_opt" = xno; then - : -else - -cat >>confdefs.h <<\_ACEOF -#define AUTO_LINUX_MEM_OPT 1 -_ACEOF - -fi - - - - - - -CCASFLAGS='$(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)' - - - - ac_config_files="$ac_config_files Makefile stage1/Makefile stage2/Makefile docs/Makefile lib/Makefile util/Makefile grub/Makefile netboot/Makefile util/grub-image util/grub-install util/grub-md5-crypt util/grub-terminfo util/grub-set-default" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${NETBOOT_SUPPORT_TRUE}" && test -z "${NETBOOT_SUPPORT_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"NETBOOT_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"NETBOOT_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${DISKLESS_SUPPORT_TRUE}" && test -z "${DISKLESS_SUPPORT_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"DISKLESS_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"DISKLESS_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${HERCULES_SUPPORT_TRUE}" && test -z "${HERCULES_SUPPORT_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"HERCULES_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"HERCULES_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${SERIAL_SUPPORT_TRUE}" && test -z "${SERIAL_SUPPORT_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"SERIAL_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"SERIAL_SUPPORT\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${SERIAL_SPEED_SIMULATION_TRUE}" && test -z "${SERIAL_SPEED_SIMULATION_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"SERIAL_SPEED_SIMULATION\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"SERIAL_SPEED_SIMULATION\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -if test -z "${BUILD_EXAMPLE_KERNEL_TRUE}" && test -z "${BUILD_EXAMPLE_KERNEL_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"BUILD_EXAMPLE_KERNEL\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"BUILD_EXAMPLE_KERNEL\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by GRUB $as_me 0.97, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -GRUB config.status 0.97 -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# -# INIT-COMMANDS section. -# - -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - -_ACEOF - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "stage1/Makefile" ) CONFIG_FILES="$CONFIG_FILES stage1/Makefile" ;; - "stage2/Makefile" ) CONFIG_FILES="$CONFIG_FILES stage2/Makefile" ;; - "docs/Makefile" ) CONFIG_FILES="$CONFIG_FILES docs/Makefile" ;; - "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;; - "util/Makefile" ) CONFIG_FILES="$CONFIG_FILES util/Makefile" ;; - "grub/Makefile" ) CONFIG_FILES="$CONFIG_FILES grub/Makefile" ;; - "netboot/Makefile" ) CONFIG_FILES="$CONFIG_FILES netboot/Makefile" ;; - "util/grub-image" ) CONFIG_FILES="$CONFIG_FILES util/grub-image" ;; - "util/grub-install" ) CONFIG_FILES="$CONFIG_FILES util/grub-install" ;; - "util/grub-md5-crypt" ) CONFIG_FILES="$CONFIG_FILES util/grub-md5-crypt" ;; - "util/grub-terminfo" ) CONFIG_FILES="$CONFIG_FILES util/grub-terminfo" ;; - "util/grub-set-default" ) CONFIG_FILES="$CONFIG_FILES util/grub-set-default" ;; - "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@CYGPATH_W@,$CYGPATH_W,;t t -s,@PACKAGE@,$PACKAGE,;t t -s,@VERSION@,$VERSION,;t t -s,@ACLOCAL@,$ACLOCAL,;t t -s,@AUTOCONF@,$AUTOCONF,;t t -s,@AUTOMAKE@,$AUTOMAKE,;t t -s,@AUTOHEADER@,$AUTOHEADER,;t t -s,@MAKEINFO@,$MAKEINFO,;t t -s,@install_sh@,$install_sh,;t t -s,@STRIP@,$STRIP,;t t -s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t -s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t -s,@mkdir_p@,$mkdir_p,;t t -s,@AWK@,$AWK,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@am__leading_dot@,$am__leading_dot,;t t -s,@AMTAR@,$AMTAR,;t t -s,@am__tar@,$am__tar,;t t -s,@am__untar@,$am__untar,;t t -s,@build@,$build,;t t -s,@build_cpu@,$build_cpu,;t t -s,@build_vendor@,$build_vendor,;t t -s,@build_os@,$build_os,;t t -s,@host@,$host,;t t -s,@host_cpu@,$host_cpu,;t t -s,@host_vendor@,$host_vendor,;t t -s,@host_os@,$host_os,;t t -s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t -s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t -s,@MAINT@,$MAINT,;t t -s,@PERL@,$PERL,;t t -s,@CC@,$CC,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@DEPDIR@,$DEPDIR,;t t -s,@am__include@,$am__include,;t t -s,@am__quote@,$am__quote,;t t -s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t -s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t -s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t -s,@CCDEPMODE@,$CCDEPMODE,;t t -s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t -s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t -s,@CCAS@,$CCAS,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@STAGE1_CFLAGS@,$STAGE1_CFLAGS,;t t -s,@STAGE2_CFLAGS@,$STAGE2_CFLAGS,;t t -s,@GRUB_CFLAGS@,$GRUB_CFLAGS,;t t -s,@OBJCOPY@,$OBJCOPY,;t t -s,@ac_ct_OBJCOPY@,$ac_ct_OBJCOPY,;t t -s,@GRUB_LIBS@,$GRUB_LIBS,;t t -s,@CPP@,$CPP,;t t -s,@EGREP@,$EGREP,;t t -s,@NETBOOT_SUPPORT_TRUE@,$NETBOOT_SUPPORT_TRUE,;t t -s,@NETBOOT_SUPPORT_FALSE@,$NETBOOT_SUPPORT_FALSE,;t t -s,@DISKLESS_SUPPORT_TRUE@,$DISKLESS_SUPPORT_TRUE,;t t -s,@DISKLESS_SUPPORT_FALSE@,$DISKLESS_SUPPORT_FALSE,;t t -s,@HERCULES_SUPPORT_TRUE@,$HERCULES_SUPPORT_TRUE,;t t -s,@HERCULES_SUPPORT_FALSE@,$HERCULES_SUPPORT_FALSE,;t t -s,@SERIAL_SUPPORT_TRUE@,$SERIAL_SUPPORT_TRUE,;t t -s,@SERIAL_SUPPORT_FALSE@,$SERIAL_SUPPORT_FALSE,;t t -s,@SERIAL_SPEED_SIMULATION_TRUE@,$SERIAL_SPEED_SIMULATION_TRUE,;t t -s,@SERIAL_SPEED_SIMULATION_FALSE@,$SERIAL_SPEED_SIMULATION_FALSE,;t t -s,@BUILD_EXAMPLE_KERNEL_TRUE@,$BUILD_EXAMPLE_KERNEL_TRUE,;t t -s,@BUILD_EXAMPLE_KERNEL_FALSE@,$BUILD_EXAMPLE_KERNEL_FALSE,;t t -s,@FSYS_CFLAGS@,$FSYS_CFLAGS,;t t -s,@NET_CFLAGS@,$NET_CFLAGS,;t t -s,@NET_EXTRAFLAGS@,$NET_EXTRAFLAGS,;t t -s,@NETBOOT_DRIVERS@,$NETBOOT_DRIVERS,;t t -s,@CCASFLAGS@,$CCASFLAGS,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_HEADER section. -# - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='[ ].*$,\1#\2' -ac_dC=' ' -ac_dD=',;t' -# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='$,\1#\2define\3' -ac_uC=' ' -ac_uD=',;t' - -for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - # Do quote $f, to prevent DOS paths from being IFS'd. - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } - # Remove the trailing spaces. - sed 's/[ ]*$//' $ac_file_inputs >$tmp/in - -_ACEOF - -# Transform confdefs.h into two sed scripts, `conftest.defines' and -# `conftest.undefs', that substitutes the proper values into -# config.h.in to produce config.h. The first handles `#define' -# templates, and the second `#undef' templates. -# And first: Protect against being on the right side of a sed subst in -# config.status. Protect against being in an unquoted here document -# in config.status. -rm -f conftest.defines conftest.undefs -# Using a here document instead of a string reduces the quoting nightmare. -# Putting comments in sed scripts is not portable. -# -# `end' is used to avoid that the second main sed command (meant for -# 0-ary CPP macros) applies to n-ary macro definitions. -# See the Autoconf documentation for `clear'. -cat >confdef2sed.sed <<\_ACEOF -s/[\\&,]/\\&/g -s,[\\$`],\\&,g -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp -t end -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp -: end -_ACEOF -# If some macros were called several times there might be several times -# the same #defines, which is useless. Nevertheless, we may not want to -# sort them, since we want the *last* AC-DEFINE to be honored. -uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines -sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs -rm -f confdef2sed.sed - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >>conftest.undefs <<\_ACEOF -s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, -_ACEOF - -# Break up conftest.defines because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS -echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS -echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS -echo ' :' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.defines >/dev/null -do - # Write a limited-size here document to $tmp/defines.sed. - echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#define' lines. - echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/defines.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail - rm -f conftest.defines - mv conftest.tail conftest.defines -done -rm -f conftest.defines -echo ' fi # grep' >>$CONFIG_STATUS -echo >>$CONFIG_STATUS - -# Break up conftest.undefs because some shells have a limit on the size -# of here documents, and old seds have small limits too (100 cmds). -echo ' # Handle all the #undef templates' >>$CONFIG_STATUS -rm -f conftest.tail -while grep . conftest.undefs >/dev/null -do - # Write a limited-size here document to $tmp/undefs.sed. - echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS - # Speed up: don't consider the non `#undef' - echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS - # Work around the forget-to-reset-the-flag bug. - echo 't clr' >>$CONFIG_STATUS - echo ': clr' >>$CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS - echo 'CEOF - sed -f $tmp/undefs.sed $tmp/in >$tmp/out - rm -f $tmp/in - mv $tmp/out $tmp/in -' >>$CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail - rm -f conftest.undefs - mv conftest.tail conftest.undefs -done -rm -f conftest.undefs - -cat >>$CONFIG_STATUS <<\_ACEOF - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - echo "/* Generated by configure. */" >$tmp/config.h - else - echo "/* $ac_file. Generated by configure. */" >$tmp/config.h - fi - cat $tmp/in >>$tmp/config.h - rm -f $tmp/in - if test x"$ac_file" != x-; then - if diff $ac_file $tmp/config.h >/dev/null 2>&1; then - { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 -echo "$as_me: $ac_file is unchanged" >&6;} - else - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - rm -f $ac_file - mv $tmp/config.h $ac_file - fi - else - cat $tmp/config.h - rm -f $tmp/config.h - fi -# Compute $ac_file's index in $config_headers. -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $ac_file | $ac_file:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || -$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X$ac_file : 'X\(//\)[^/]' \| \ - X$ac_file : 'X\(//\)$' \| \ - X$ac_file : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X$ac_file | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'`/stamp-h$_am_stamp_count -done -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -# -# CONFIG_COMMANDS section. -# -for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue - ac_dest=`echo "$ac_file" | sed 's,:.*,,'` - ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_dir=`(dirname "$ac_dest") 2>/dev/null || -$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_dest" : 'X\(//\)[^/]' \| \ - X"$ac_dest" : 'X\(//\)$' \| \ - X"$ac_dest" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_dest" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 -echo "$as_me: executing $ac_dest commands" >&6;} - case $ac_dest in - depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # So let's grep whole file. - if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then - dirpart=`(dirname "$mf") 2>/dev/null || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`(dirname "$file") 2>/dev/null || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p $dirpart/$fdir - else - as_dir=$dirpart/$fdir - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 -echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} - { (exit 1); exit 1; }; }; } - - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done -done - ;; - esac -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - diff --git a/depcomp b/depcomp deleted file mode 100644 index 11e2d3bfe..000000000 --- a/depcomp +++ /dev/null @@ -1,522 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2004-05-31.23 - -# Copyright (C) 1999, 2000, 2003, 2004 Free Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva . - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to . -EOF - exit 0 - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit 0 - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" - if test "$libtool" = yes; then - "$@" -Wc,-M - else - "$@" -M - fi - stat=$? - - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - - if test -f "$tmpdepfile"; then - outname="$stripped.o" - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # Dependencies are output in .lo.d with libtool 1.4. - # With libtool 1.5 they are output both in $dir.libs/$base.o.d - # and in $dir.libs/$base.o.d and $dir$base.o.d. We process the - # latter, because the former will be cleaned when $dir.libs is - # erased. - tmpdepfile1="$dir.libs/$base.lo.d" - tmpdepfile2="$dir$base.o.d" - tmpdepfile3="$dir.libs/$base.d" - "$@" -Wc,-MD - else - tmpdepfile1="$dir$base.o.d" - tmpdepfile2="$dir$base.d" - tmpdepfile3="$dir$base.d" - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - if test -f "$tmpdepfile1"; then - tmpdepfile="$tmpdepfile1" - elif test -f "$tmpdepfile2"; then - tmpdepfile="$tmpdepfile2" - else - tmpdepfile="$tmpdepfile3" - fi - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no - for arg in "$@"; do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix="`echo $object | sed 's/^.*\././'`" - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. - "$@" || exit $? - IFS=" " - for arg - do - case "$arg" in - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/docs/Makefile.in b/docs/Makefile.in deleted file mode 100644 index 44864a296..000000000 --- a/docs/Makefile.in +++ /dev/null @@ -1,770 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -SOURCES = $(kernel_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -EXTRA_PROGRAMS = kernel$(EXEEXT) -@BUILD_EXAMPLE_KERNEL_TRUE@noinst_PROGRAMS = kernel$(EXEEXT) -subdir = docs -DIST_COMMON = $(grub_TEXINFOS) $(multiboot_TEXINFOS) \ - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/stamp-vti $(srcdir)/version.texi mdate-sh \ - texinfo.tex -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -PROGRAMS = $(noinst_PROGRAMS) -am__kernel_SOURCES_DIST = boot.S kernel.c multiboot.h -am__objects_1 = boot.$(OBJEXT) kernel-kernel.$(OBJEXT) -@BUILD_EXAMPLE_KERNEL_TRUE@am_kernel_OBJECTS = $(am__objects_1) -kernel_OBJECTS = $(am_kernel_OBJECTS) -kernel_LDADD = $(LDADD) -SCRIPTS = $(noinst_SCRIPTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS) -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(kernel_SOURCES) -DIST_SOURCES = $(am__kernel_SOURCES_DIST) -INFO_DEPS = $(srcdir)/grub.info $(srcdir)/multiboot.info -am__TEXINFO_TEX_DIR = $(srcdir) -DVIS = grub.dvi multiboot.dvi -PDFS = grub.pdf multiboot.pdf -PSS = grub.ps multiboot.ps -HTMLS = grub.html multiboot.html -TEXINFOS = grub.texi multiboot.texi -TEXI2DVI = texi2dvi -TEXI2PDF = $(TEXI2DVI) --pdf --batch -MAKEINFOHTML = $(MAKEINFO) --html -AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) -DVIPS = dvips -am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \ - "$(DESTDIR)$(man8dir)" -man1dir = $(mandir)/man1 -man8dir = $(mandir)/man8 -NROFF = nroff -MANS = $(man_MANS) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -info_TEXINFOS = grub.texi multiboot.texi -grub_TEXINFOS = internals.texi fdl.texi -EXAMPLES = boot.S kernel.c multiboot.h -multiboot_TEXINFOS = boot.S.texi kernel.c.texi multiboot.h.texi -man_MANS = grub.8 mbchk.1 grub-install.8 grub-md5-crypt.8 grub-terminfo.8 -HELP2MAN = help2man -SRC2TEXI = src2texi -noinst_SCRIPTS = $(HELP2MAN) $(SRC2TEXI) -@BUILD_EXAMPLE_KERNEL_TRUE@kernel_SOURCES = $(EXAMPLES) -@BUILD_EXAMPLE_KERNEL_TRUE@kernel_CFLAGS = -fno-builtin -nostdinc -O -g -Wall \ -@BUILD_EXAMPLE_KERNEL_TRUE@ -imacros $(top_builddir)/config.h - -@BUILD_EXAMPLE_KERNEL_TRUE@kernel_LDFLAGS = -nostdlib -Wl,-N -Wl,-Ttext -Wl,100000 -EXTRA_DIST = menu.lst $(man_MANS) $(noinst_SCRIPTS) \ - $(EXAMPLES) $(multiboot_TEXINFOS) - -CLEANFILES = $(noinst_PROGRAMS) -all: all-am - -.SUFFIXES: -.SUFFIXES: .S .c .dvi .html .info .o .obj .pdf .ps .texi -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu docs/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -clean-noinstPROGRAMS: - -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) -kernel$(EXEEXT): $(kernel_OBJECTS) $(kernel_DEPENDENCIES) - @rm -f kernel$(EXEEXT) - $(LINK) $(kernel_LDFLAGS) $(kernel_OBJECTS) $(kernel_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kernel-kernel.Po@am__quote@ - -.S.o: - $(CCASCOMPILE) -c $< - -.S.obj: - $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'` - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -kernel-kernel.o: kernel.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -MT kernel-kernel.o -MD -MP -MF "$(DEPDIR)/kernel-kernel.Tpo" -c -o kernel-kernel.o `test -f 'kernel.c' || echo '$(srcdir)/'`kernel.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/kernel-kernel.Tpo" "$(DEPDIR)/kernel-kernel.Po"; else rm -f "$(DEPDIR)/kernel-kernel.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='kernel.c' object='kernel-kernel.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -c -o kernel-kernel.o `test -f 'kernel.c' || echo '$(srcdir)/'`kernel.c - -kernel-kernel.obj: kernel.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -MT kernel-kernel.obj -MD -MP -MF "$(DEPDIR)/kernel-kernel.Tpo" -c -o kernel-kernel.obj `if test -f 'kernel.c'; then $(CYGPATH_W) 'kernel.c'; else $(CYGPATH_W) '$(srcdir)/kernel.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/kernel-kernel.Tpo" "$(DEPDIR)/kernel-kernel.Po"; else rm -f "$(DEPDIR)/kernel-kernel.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='kernel.c' object='kernel-kernel.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(kernel_CFLAGS) $(CFLAGS) -c -o kernel-kernel.obj `if test -f 'kernel.c'; then $(CYGPATH_W) 'kernel.c'; else $(CYGPATH_W) '$(srcdir)/kernel.c'; fi` - -.texi.info: - restore=: && backupdir="$(am__leading_dot)am$$$$" && \ - am__cwd=`pwd` && cd $(srcdir) && \ - rm -rf $$backupdir && mkdir $$backupdir && \ - for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ - if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ - done; \ - cd "$$am__cwd"; \ - if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ - -o $@ $<; \ - then \ - rc=0; \ - cd $(srcdir); \ - else \ - rc=$$?; \ - cd $(srcdir) && \ - $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ - fi; \ - rm -rf $$backupdir; exit $$rc - -.texi.dvi: - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ - $(TEXI2DVI) $< - -.texi.pdf: - TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ - $(TEXI2PDF) $< - -.texi.html: - rm -rf $(@:.html=.htp) - if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ - -o $(@:.html=.htp) $<; \ - then \ - rm -rf $@; \ - if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ - mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ - else \ - if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ - rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ - exit 1; \ - fi -$(srcdir)/grub.info: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS) -grub.dvi: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS) -grub.pdf: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS) -grub.html: grub.texi $(srcdir)/version.texi $(grub_TEXINFOS) -$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti -$(srcdir)/stamp-vti: grub.texi $(top_srcdir)/configure - @(dir=.; test -f ./grub.texi || dir=$(srcdir); \ - set `$(SHELL) $(srcdir)/mdate-sh $$dir/grub.texi`; \ - echo "@set UPDATED $$1 $$2 $$3"; \ - echo "@set UPDATED-MONTH $$2 $$3"; \ - echo "@set EDITION $(VERSION)"; \ - echo "@set VERSION $(VERSION)") > vti.tmp - @cmp -s vti.tmp $(srcdir)/version.texi \ - || (echo "Updating $(srcdir)/version.texi"; \ - cp vti.tmp $(srcdir)/version.texi) - -@rm -f vti.tmp - @cp $(srcdir)/version.texi $@ - -mostlyclean-vti: - -rm -f vti.tmp - -maintainer-clean-vti: -@MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi -$(srcdir)/multiboot.info: multiboot.texi $(multiboot_TEXINFOS) -multiboot.dvi: multiboot.texi $(multiboot_TEXINFOS) -multiboot.pdf: multiboot.texi $(multiboot_TEXINFOS) -multiboot.html: multiboot.texi $(multiboot_TEXINFOS) -.dvi.ps: - $(DVIPS) -o $@ $< - -uninstall-info-am: - $(PRE_UNINSTALL) - @if (install-info --version && \ - install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ - list='$(INFO_DEPS)'; \ - for file in $$list; do \ - relfile=`echo "$$file" | sed 's|^.*/||'`; \ - echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ - install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ - done; \ - else :; fi - @$(NORMAL_UNINSTALL) - @list='$(INFO_DEPS)'; \ - for file in $$list; do \ - relfile=`echo "$$file" | sed 's|^.*/||'`; \ - relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ - (if cd "$(DESTDIR)$(infodir)"; then \ - echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \ - rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ - else :; fi); \ - done - -dist-info: $(INFO_DEPS) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - list='$(INFO_DEPS)'; \ - for base in $$list; do \ - case $$base in \ - $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ - esac; \ - if test -f $$base; then d=.; else d=$(srcdir); fi; \ - for file in $$d/$$base*; do \ - relfile=`expr "$$file" : "$$d/\(.*\)"`; \ - test -f $(distdir)/$$relfile || \ - cp -p $$file $(distdir)/$$relfile; \ - done; \ - done - -mostlyclean-aminfo: - -rm -rf grub.aux grub.cp grub.cps grub.fn grub.ky grub.log grub.pg grub.tmp \ - grub.toc grub.tp grub.vr grub.dvi grub.pdf grub.ps grub.html \ - multiboot.aux multiboot.cp multiboot.cps multiboot.fn \ - multiboot.ky multiboot.log multiboot.pg multiboot.tmp \ - multiboot.toc multiboot.tp multiboot.vr multiboot.dvi \ - multiboot.pdf multiboot.ps multiboot.html - -maintainer-clean-aminfo: - @list='$(INFO_DEPS)'; for i in $$list; do \ - i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ - echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ - rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ - done -install-man1: $(man1_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ - done -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.1*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 1*) ;; \ - *) ext='1' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ - done -install-man8: $(man8_MANS) $(man_MANS) - @$(NORMAL_INSTALL) - test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)" - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ - else file=$$i; fi; \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \ - done -uninstall-man8: - @$(NORMAL_UNINSTALL) - @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ - l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ - for i in $$l2; do \ - case "$$i" in \ - *.8*) list="$$list $$i" ;; \ - esac; \ - done; \ - for i in $$list; do \ - ext=`echo $$i | sed -e 's/^.*\\.//'`; \ - case "$$ext" in \ - 8*) ;; \ - *) ext='8' ;; \ - esac; \ - inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ - inst=`echo $$inst | sed -e 's/^.*\///'`; \ - inst=`echo $$inst | sed '$(transform)'`.$$ext; \ - echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \ - rm -f "$(DESTDIR)$(man8dir)/$$inst"; \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-info -check-am: all-am -check: check-am -all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) -installdirs: - for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: $(DVIS) - -html: html-am - -html-am: $(HTMLS) - -info: info-am - -info-am: $(INFO_DEPS) - -install-data-am: install-info-am install-man - -install-exec-am: - -install-info: install-info-am - -install-info-am: $(INFO_DEPS) - @$(NORMAL_INSTALL) - test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - list='$(INFO_DEPS)'; \ - for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - esac; \ - if test -f $$file; then d=.; else d=$(srcdir); fi; \ - file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ - for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ - $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ - if test -f $$ifile; then \ - relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ - echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ - $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ - else : ; fi; \ - done; \ - done - @$(POST_INSTALL) - @if (install-info --version && \ - install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ - list='$(INFO_DEPS)'; \ - for file in $$list; do \ - relfile=`echo "$$file" | sed 's|^.*/||'`; \ - echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ - install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ - done; \ - else : ; fi -install-man: install-man1 install-man8 - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-aminfo \ - maintainer-clean-generic maintainer-clean-vti - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ - mostlyclean-generic mostlyclean-vti - -pdf: pdf-am - -pdf-am: $(PDFS) - -ps: ps-am - -ps-am: $(PSS) - -uninstall-am: uninstall-info-am uninstall-man - -uninstall-man: uninstall-man1 uninstall-man8 - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-noinstPROGRAMS ctags dist-info distclean \ - distclean-compile distclean-generic distclean-tags distdir dvi \ - dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-exec install-exec-am \ - install-info install-info-am install-man install-man1 \ - install-man8 install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-aminfo \ - maintainer-clean-generic maintainer-clean-vti mostlyclean \ - mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \ - mostlyclean-vti pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-info-am uninstall-man uninstall-man1 \ - uninstall-man8 - - -@BUILD_EXAMPLE_KERNEL_TRUE@boot.o: multiboot.h - -# Cancel the rule %.texi -> %. This rule may confuse make to determine -# the dependecies. -.texi: - -%.c.texi: %.c $(srcdir)/$(SRC2TEXI) - $(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@ - -%.h.texi: %.h $(srcdir)/$(SRC2TEXI) - $(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@ - -%.S.texi: %.S $(srcdir)/$(SRC2TEXI) - $(SHELL) $(srcdir)/$(SRC2TEXI) $(srcdir) $< $@ - -@MAINTAINER_MODE_TRUE@$(srcdir)/grub.8: ../grub/grub $(srcdir)/$(HELP2MAN) -@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) --name="the grub shell" \ -@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $< - -@MAINTAINER_MODE_TRUE@$(srcdir)/grub-install.8: ../util/grub-install $(srcdir)/$(HELP2MAN) -@MAINTAINER_MODE_TRUE@ chmod 755 $< -@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) --name="install GRUB on your drive" \ -@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $< - -@MAINTAINER_MODE_TRUE@$(srcdir)/mbchk.1: ../util/mbchk $(srcdir)/$(HELP2MAN) -@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) \ -@MAINTAINER_MODE_TRUE@ --name="check the format of a Multiboot kernel" \ -@MAINTAINER_MODE_TRUE@ --section=1 --output=$@ $< - -@MAINTAINER_MODE_TRUE@$(srcdir)/grub-md5-crypt.8: ../util/grub-md5-crypt $(srcdir)/$(HELP2MAN) -@MAINTAINER_MODE_TRUE@ chmod 755 $< -@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) \ -@MAINTAINER_MODE_TRUE@ --name="Encrypt a password in MD5 format" \ -@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $< - -@MAINTAINER_MODE_TRUE@$(srcdir)/grub-terminfo.8: ../util/grub-terminfo $(srcdir)/$(HELP2MAN) -@MAINTAINER_MODE_TRUE@ chmod 755 $< -@MAINTAINER_MODE_TRUE@ $(PERL) $(srcdir)/$(HELP2MAN) \ -@MAINTAINER_MODE_TRUE@ --name="Generate a terminfo command from a terminfo name" \ -@MAINTAINER_MODE_TRUE@ --section=8 --output=$@ $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/docs/mdate-sh b/docs/mdate-sh deleted file mode 100644 index 881782eb5..000000000 --- a/docs/mdate-sh +++ /dev/null @@ -1,170 +0,0 @@ -#!/bin/sh -# Get modification time of a file or directory and pretty-print it. - -scriptversion=2004-12-08.12 - -# Copyright (C) 1995, 1996, 1997, 2003, 2004 Free Software Foundation, Inc. -# written by Ulrich Drepper , June 1995 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -case $1 in - '') - echo "$0: No file. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: mdate-sh [--help] [--version] FILE - -Pretty-print the modification time of FILE. - -Report bugs to . -EOF - exit 0 - ;; - -v | --v*) - echo "mdate-sh $scriptversion" - exit 0 - ;; -esac - -# Prevent date giving response in another language. -LANG=C -export LANG -LC_ALL=C -export LC_ALL -LC_TIME=C -export LC_TIME - -save_arg1="$1" - -# Find out how to get the extended ls output of a file or directory. -if ls -L /dev/null 1>/dev/null 2>&1; then - ls_command='ls -L -l -d' -else - ls_command='ls -l -d' -fi - -# A `ls -l' line looks as follows on OS/2. -# drwxrwx--- 0 Aug 11 2001 foo -# This differs from Unix, which adds ownership information. -# drwxrwx--- 2 root root 4096 Aug 11 2001 foo -# -# To find the date, we split the line on spaces and iterate on words -# until we find a month. This cannot work with files whose owner is a -# user named `Jan', or `Feb', etc. However, it's unlikely that `/' -# will be owned by a user whose name is a month. So we first look at -# the extended ls output of the root directory to decide how many -# words should be skipped to get the date. - -# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below. -set x`ls -l -d /` - -# Find which argument is the month. -month= -command= -until test $month -do - shift - # Add another shift to the command. - command="$command shift;" - case $1 in - Jan) month=January; nummonth=1;; - Feb) month=February; nummonth=2;; - Mar) month=March; nummonth=3;; - Apr) month=April; nummonth=4;; - May) month=May; nummonth=5;; - Jun) month=June; nummonth=6;; - Jul) month=July; nummonth=7;; - Aug) month=August; nummonth=8;; - Sep) month=September; nummonth=9;; - Oct) month=October; nummonth=10;; - Nov) month=November; nummonth=11;; - Dec) month=December; nummonth=12;; - esac -done - -# Get the extended ls output of the file or directory. -set x`eval "$ls_command \"\$save_arg1\""` - -# Remove all preceding arguments -eval $command - -# Get the month. Next argument is day, followed by the year or time. -case $1 in - Jan) month=January; nummonth=1;; - Feb) month=February; nummonth=2;; - Mar) month=March; nummonth=3;; - Apr) month=April; nummonth=4;; - May) month=May; nummonth=5;; - Jun) month=June; nummonth=6;; - Jul) month=July; nummonth=7;; - Aug) month=August; nummonth=8;; - Sep) month=September; nummonth=9;; - Oct) month=October; nummonth=10;; - Nov) month=November; nummonth=11;; - Dec) month=December; nummonth=12;; -esac - -day=$2 - -# Here we have to deal with the problem that the ls output gives either -# the time of day or the year. -case $3 in - *:*) set `date`; eval year=\$$# - case $2 in - Jan) nummonthtod=1;; - Feb) nummonthtod=2;; - Mar) nummonthtod=3;; - Apr) nummonthtod=4;; - May) nummonthtod=5;; - Jun) nummonthtod=6;; - Jul) nummonthtod=7;; - Aug) nummonthtod=8;; - Sep) nummonthtod=9;; - Oct) nummonthtod=10;; - Nov) nummonthtod=11;; - Dec) nummonthtod=12;; - esac - # For the first six month of the year the time notation can also - # be used for files modified in the last year. - if (expr $nummonth \> $nummonthtod) > /dev/null; - then - year=`expr $year - 1` - fi;; - *) year=$3;; -esac - -# The result. -echo $day $month $year - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/docs/texinfo.tex b/docs/texinfo.tex deleted file mode 100644 index c93912a05..000000000 --- a/docs/texinfo.tex +++ /dev/null @@ -1,7086 +0,0 @@ -% texinfo.tex -- TeX macros to handle Texinfo files. -% -% Load plain if necessary, i.e., if running under initex. -\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi -% -\def\texinfoversion{2004-11-25.16} -% -% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, -% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software -% Foundation, Inc. -% -% This texinfo.tex file is free software; you can redistribute it and/or -% modify it under the terms of the GNU General Public License as -% published by the Free Software Foundation; either version 2, or (at -% your option) any later version. -% -% This texinfo.tex file is distributed in the hope that it will be -% useful, but WITHOUT ANY WARRANTY; without even the implied warranty -% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -% General Public License for more details. -% -% You should have received a copy of the GNU General Public License -% along with this texinfo.tex file; see the file COPYING. If not, write -% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, -% Boston, MA 02111-1307, USA. -% -% As a special exception, when this file is read by TeX when processing -% a Texinfo source document, you may use the result without -% restriction. (This has been our intent since Texinfo was invented.) -% -% Please try the latest version of texinfo.tex before submitting bug -% reports; you can get the latest version from: -% http://www.gnu.org/software/texinfo/ (the Texinfo home page), or -% ftp://tug.org/tex/texinfo.tex -% (and all CTAN mirrors, see http://www.ctan.org). -% The texinfo.tex in any given distribution could well be out -% of date, so if that's what you're using, please check. -% -% Send bug reports to bug-texinfo@gnu.org. Please include including a -% complete document in each bug report with which we can reproduce the -% problem. Patches are, of course, greatly appreciated. -% -% To process a Texinfo manual with TeX, it's most reliable to use the -% texi2dvi shell script that comes with the distribution. For a simple -% manual foo.texi, however, you can get away with this: -% tex foo.texi -% texindex foo.?? -% tex foo.texi -% tex foo.texi -% dvips foo.dvi -o # or whatever; this makes foo.ps. -% The extra TeX runs get the cross-reference information correct. -% Sometimes one run after texindex suffices, and sometimes you need more -% than two; texi2dvi does it as many times as necessary. -% -% It is possible to adapt texinfo.tex for other languages, to some -% extent. You can get the existing language-specific files from the -% full Texinfo distribution. -% -% The GNU Texinfo home page is http://www.gnu.org/software/texinfo. - - -\message{Loading texinfo [version \texinfoversion]:} - -% If in a .fmt file, print the version number -% and turn on active characters that we couldn't do earlier because -% they might have appeared in the input file name. -\everyjob{\message{[Texinfo version \texinfoversion]}% - \catcode`+=\active \catcode`\_=\active} - -\message{Basics,} -\chardef\other=12 - -% We never want plain's \outer definition of \+ in Texinfo. -% For @tex, we can use \tabalign. -\let\+ = \relax - -% Save some plain tex macros whose names we will redefine. -\let\ptexb=\b -\let\ptexbullet=\bullet -\let\ptexc=\c -\let\ptexcomma=\, -\let\ptexdot=\. -\let\ptexdots=\dots -\let\ptexend=\end -\let\ptexequiv=\equiv -\let\ptexexclam=\! -\let\ptexfootnote=\footnote -\let\ptexgtr=> -\let\ptexhat=^ -\let\ptexi=\i -\let\ptexindent=\indent -\let\ptexinsert=\insert -\let\ptexlbrace=\{ -\let\ptexless=< -\let\ptexnewwrite\newwrite -\let\ptexnoindent=\noindent -\let\ptexplus=+ -\let\ptexrbrace=\} -\let\ptexslash=\/ -\let\ptexstar=\* -\let\ptext=\t - -% If this character appears in an error message or help string, it -% starts a new line in the output. -\newlinechar = `^^J - -% Use TeX 3.0's \inputlineno to get the line number, for better error -% messages, but if we're using an old version of TeX, don't do anything. -% -\ifx\inputlineno\thisisundefined - \let\linenumber = \empty % Pre-3.0. -\else - \def\linenumber{l.\the\inputlineno:\space} -\fi - -% Set up fixed words for English if not already set. -\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi -\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi -\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi -\ifx\putwordin\undefined \gdef\putwordin{in}\fi -\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi -\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi -\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi -\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi -\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi -\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi -\ifx\putwordof\undefined \gdef\putwordof{of}\fi -\ifx\putwordon\undefined \gdef\putwordon{on}\fi -\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi -\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi -\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi -\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi -\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi -\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi -\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi -% -\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi -\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi -\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi -\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi -\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi -\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi -\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi -\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi -\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi -\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi -\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi -\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi -% -\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi -\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi -\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi -\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi -\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi - -% In some macros, we cannot use the `\? notation---the left quote is -% in some cases the escape char. -\chardef\colonChar = `\: -\chardef\commaChar = `\, -\chardef\dotChar = `\. -\chardef\exclamChar= `\! -\chardef\questChar = `\? -\chardef\semiChar = `\; -\chardef\underChar = `\_ - -\chardef\spaceChar = `\ % -\chardef\spacecat = 10 -\def\spaceisspace{\catcode\spaceChar=\spacecat} - -% Ignore a token. -% -\def\gobble#1{} - -% The following is used inside several \edef's. -\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname} - -% Hyphenation fixes. -\hyphenation{ - Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script - ap-pen-dix bit-map bit-maps - data-base data-bases eshell fall-ing half-way long-est man-u-script - man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm - par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces - spell-ing spell-ings - stand-alone strong-est time-stamp time-stamps which-ever white-space - wide-spread wrap-around -} - -% Margin to add to right of even pages, to left of odd pages. -\newdimen\bindingoffset -\newdimen\normaloffset -\newdimen\pagewidth \newdimen\pageheight - -% For a final copy, take out the rectangles -% that mark overfull boxes (in case you have decided -% that the text looks ok even though it passes the margin). -% -\def\finalout{\overfullrule=0pt} - -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). -% -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% -} - -% Sometimes it is convenient to have everything in the transcript file -% and nothing on the terminal. We don't just call \tracingall here, -% since that produces some useless output on the terminal. We also make -% some effort to order the tracing commands to reduce output in the log -% file; cf. trace.sty in LaTeX. -% -\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}% -\def\loggingall{% - \tracingstats2 - \tracingpages1 - \tracinglostchars2 % 2 gives us more in etex - \tracingparagraphs1 - \tracingoutput1 - \tracingmacros2 - \tracingrestores1 - \showboxbreadth\maxdimen \showboxdepth\maxdimen - \ifx\eTeXversion\undefined\else % etex gives us more logging - \tracingscantokens1 - \tracingifs1 - \tracinggroups1 - \tracingnesting2 - \tracingassigns1 - \fi - \tracingcommands3 % 3 gives us more in etex - \errorcontextlines16 -}% - -% add check for \lastpenalty to plain's definitions. If the last thing -% we did was a \nobreak, we don't want to insert more space. -% -\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount - \removelastskip\penalty-50\smallskip\fi\fi} -\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount - \removelastskip\penalty-100\medskip\fi\fi} -\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount - \removelastskip\penalty-200\bigskip\fi\fi} - -% For @cropmarks command. -% Do @cropmarks to get crop marks. -% -\newif\ifcropmarks -\let\cropmarks = \cropmarkstrue -% -% Dimensions to add cropmarks at corners. -% Added by P. A. MacKay, 12 Nov. 1986 -% -\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines -\newdimen\cornerlong \cornerlong=1pc -\newdimen\cornerthick \cornerthick=.3pt -\newdimen\topandbottommargin \topandbottommargin=.75in - -% Main output routine. -\chardef\PAGE = 255 -\output = {\onepageout{\pagecontents\PAGE}} - -\newbox\headlinebox -\newbox\footlinebox - -% \onepageout takes a vbox as an argument. Note that \pagecontents -% does insertions, but you have to call it yourself. -\def\onepageout#1{% - \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi - % - \ifodd\pageno \advance\hoffset by \bindingoffset - \else \advance\hoffset by -\bindingoffset\fi - % - % Do this outside of the \shipout so @code etc. will be expanded in - % the headline as they should be, not taken literally (outputting ''code). - \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}% - \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}% - % - {% - % Have to do this stuff outside the \shipout because we want it to - % take effect in \write's, yet the group defined by the \vbox ends - % before the \shipout runs. - % - \escapechar = `\\ % use backslash in output files. - \indexdummies % don't expand commands in the output. - \normalturnoffactive % \ in index entries must not stay \, e.g., if - % the page break happens to be in the middle of an example. - \shipout\vbox{% - % Do this early so pdf references go to the beginning of the page. - \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi - % - \ifcropmarks \vbox to \outervsize\bgroup - \hsize = \outerhsize - \vskip-\topandbottommargin - \vtop to0pt{% - \line{\ewtop\hfil\ewtop}% - \nointerlineskip - \line{% - \vbox{\moveleft\cornerthick\nstop}% - \hfill - \vbox{\moveright\cornerthick\nstop}% - }% - \vss}% - \vskip\topandbottommargin - \line\bgroup - \hfil % center the page within the outer (page) hsize. - \ifodd\pageno\hskip\bindingoffset\fi - \vbox\bgroup - \fi - % - \unvbox\headlinebox - \pagebody{#1}% - \ifdim\ht\footlinebox > 0pt - % Only leave this space if the footline is nonempty. - % (We lessened \vsize for it in \oddfootingxxx.) - % The \baselineskip=24pt in plain's \makefootline has no effect. - \vskip 2\baselineskip - \unvbox\footlinebox - \fi - % - \ifcropmarks - \egroup % end of \vbox\bgroup - \hfil\egroup % end of (centering) \line\bgroup - \vskip\topandbottommargin plus1fill minus1fill - \boxmaxdepth = \cornerthick - \vbox to0pt{\vss - \line{% - \vbox{\moveleft\cornerthick\nsbot}% - \hfill - \vbox{\moveright\cornerthick\nsbot}% - }% - \nointerlineskip - \line{\ewbot\hfil\ewbot}% - }% - \egroup % \vbox from first cropmarks clause - \fi - }% end of \shipout\vbox - }% end of group with \normalturnoffactive - \advancepageno - \ifnum\outputpenalty>-20000 \else\dosupereject\fi -} - -\newinsert\margin \dimen\margin=\maxdimen - -\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} -{\catcode`\@ =11 -\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi -% marginal hacks, juha@viisa.uucp (Juha Takala) -\ifvoid\margin\else % marginal info is present - \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi -\dimen@=\dp#1 \unvbox#1 -\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi -\ifr@ggedbottom \kern-\dimen@ \vfil \fi} -} - -% Here are the rules for the cropmarks. Note that they are -% offset so that the space between them is truly \outerhsize or \outervsize -% (P. A. MacKay, 12 November, 1986) -% -\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} -\def\nstop{\vbox - {\hrule height\cornerthick depth\cornerlong width\cornerthick}} -\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} -\def\nsbot{\vbox - {\hrule height\cornerlong depth\cornerthick width\cornerthick}} - -% Parse an argument, then pass it to #1. The argument is the rest of -% the input line (except we remove a trailing comment). #1 should be a -% macro which expects an ordinary undelimited TeX argument. -% -\def\parsearg{\parseargusing{}} -\def\parseargusing#1#2{% - \def\next{#2}% - \begingroup - \obeylines - \spaceisspace - #1% - \parseargline\empty% Insert the \empty token, see \finishparsearg below. -} - -{\obeylines % - \gdef\parseargline#1^^M{% - \endgroup % End of the group started in \parsearg. - \argremovecomment #1\comment\ArgTerm% - }% -} - -% First remove any @comment, then any @c comment. -\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} -\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} - -% Each occurence of `\^^M' or `\^^M' is replaced by a single space. -% -% \argremovec might leave us with trailing space, e.g., -% @end itemize @c foo -% This space token undergoes the same procedure and is eventually removed -% by \finishparsearg. -% -\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M} -\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M} -\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{% - \def\temp{#3}% - \ifx\temp\empty - % We cannot use \next here, as it holds the macro to run; - % thus we reuse \temp. - \let\temp\finishparsearg - \else - \let\temp\argcheckspaces - \fi - % Put the space token in: - \temp#1 #3\ArgTerm -} - -% If a _delimited_ argument is enclosed in braces, they get stripped; so -% to get _exactly_ the rest of the line, we had to prevent such situation. -% We prepended an \empty token at the very beginning and we expand it now, -% just before passing the control to \next. -% (Similarily, we have to think about #3 of \argcheckspacesY above: it is -% either the null string, or it ends with \^^M---thus there is no danger -% that a pair of braces would be stripped. -% -% But first, we have to remove the trailing space token. -% -\def\finishparsearg#1 \ArgTerm{\expandafter\next\expandafter{#1}} - -% \parseargdef\foo{...} -% is roughly equivalent to -% \def\foo{\parsearg\Xfoo} -% \def\Xfoo#1{...} -% -% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my -% favourite TeX trick. --kasal, 16nov03 - -\def\parseargdef#1{% - \expandafter \doparseargdef \csname\string#1\endcsname #1% -} -\def\doparseargdef#1#2{% - \def#2{\parsearg#1}% - \def#1##1% -} - -% Several utility definitions with active space: -{ - \obeyspaces - \gdef\obeyedspace{ } - - % Make each space character in the input produce a normal interword - % space in the output. Don't allow a line break at this space, as this - % is used only in environments like @example, where each line of input - % should produce a line of output anyway. - % - \gdef\sepspaces{\obeyspaces\let =\tie} - - % If an index command is used in an @example environment, any spaces - % therein should become regular spaces in the raw index file, not the - % expansion of \tie (\leavevmode \penalty \@M \ ). - \gdef\unsepspaces{\let =\space} -} - - -\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} - -% Define the framework for environments in texinfo.tex. It's used like this: -% -% \envdef\foo{...} -% \def\Efoo{...} -% -% It's the responsibility of \envdef to insert \begingroup before the -% actual body; @end closes the group after calling \Efoo. \envdef also -% defines \thisenv, so the current environment is known; @end checks -% whether the environment name matches. The \checkenv macro can also be -% used to check whether the current environment is the one expected. -% -% Non-false conditionals (@iftex, @ifset) don't fit into this, so they -% are not treated as enviroments; they don't open a group. (The -% implementation of @end takes care not to call \endgroup in this -% special case.) - - -% At runtime, environments start with this: -\def\startenvironment#1{\begingroup\def\thisenv{#1}} -% initialize -\let\thisenv\empty - -% ... but they get defined via ``\envdef\foo{...}'': -\long\def\envdef#1#2{\def#1{\startenvironment#1#2}} -\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}} - -% Check whether we're in the right environment: -\def\checkenv#1{% - \def\temp{#1}% - \ifx\thisenv\temp - \else - \badenverr - \fi -} - -% Evironment mismatch, #1 expected: -\def\badenverr{% - \errhelp = \EMsimple - \errmessage{This command can appear only \inenvironment\temp, - not \inenvironment\thisenv}% -} -\def\inenvironment#1{% - \ifx#1\empty - out of any environment% - \else - in environment \expandafter\string#1% - \fi -} - -% @end foo executes the definition of \Efoo. -% But first, it executes a specialized version of \checkenv -% -\parseargdef\end{% - \if 1\csname iscond.#1\endcsname - \else - % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 - \expandafter\checkenv\csname#1\endcsname - \csname E#1\endcsname - \endgroup - \fi -} - -\newhelp\EMsimple{Press RETURN to continue.} - - -%% Simple single-character @ commands - -% @@ prints an @ -% Kludge this until the fonts are right (grr). -\def\@{{\tt\char64}} - -% This is turned off because it was never documented -% and you can use @w{...} around a quote to suppress ligatures. -%% Define @` and @' to be the same as ` and ' -%% but suppressing ligatures. -%\def\`{{`}} -%\def\'{{'}} - -% Used to generate quoted braces. -\def\mylbrace {{\tt\char123}} -\def\myrbrace {{\tt\char125}} -\let\{=\mylbrace -\let\}=\myrbrace -\begingroup - % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux file. - \catcode`\{ = \other \catcode`\} = \other - \catcode`\[ = 1 \catcode`\] = 2 - \catcode`\! = 0 \catcode`\\ = \other - !gdef!lbracecmd[\{]% - !gdef!rbracecmd[\}]% - !gdef!lbraceatcmd[@{]% - !gdef!rbraceatcmd[@}]% -!endgroup - -% @comma{} to avoid , parsing problems. -\let\comma = , - -% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent -% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. -\let\, = \c -\let\dotaccent = \. -\def\ringaccent#1{{\accent23 #1}} -\let\tieaccent = \t -\let\ubaraccent = \b -\let\udotaccent = \d - -% Other special characters: @questiondown @exclamdown @ordf @ordm -% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. -\def\questiondown{?`} -\def\exclamdown{!`} -\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} -\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} - -% Dotless i and dotless j, used for accents. -\def\imacro{i} -\def\jmacro{j} -\def\dotless#1{% - \def\temp{#1}% - \ifx\temp\imacro \ptexi - \else\ifx\temp\jmacro \j - \else \errmessage{@dotless can be used only with i or j}% - \fi\fi -} - -% The \TeX{} logo, as in plain, but resetting the spacing so that a -% period following counts as ending a sentence. (Idea found in latex.) -% -\edef\TeX{\TeX \spacefactor=1000 } - -% @LaTeX{} logo. Not quite the same results as the definition in -% latex.ltx, since we use a different font for the raised A; it's most -% convenient for us to use an explicitly smaller font, rather than using -% the \scriptstyle font (since we don't reset \scriptstyle and -% \scriptscriptstyle). -% -\def\LaTeX{% - L\kern-.36em - {\setbox0=\hbox{T}% - \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% - \kern-.15em - \TeX -} - -% Be sure we're in horizontal mode when doing a tie, since we make space -% equivalent to this in @example-like environments. Otherwise, a space -% at the beginning of a line will start with \penalty -- and -% since \penalty is valid in vertical mode, we'd end up putting the -% penalty on the vertical list instead of in the new paragraph. -{\catcode`@ = 11 - % Avoid using \@M directly, because that causes trouble - % if the definition is written into an index file. - \global\let\tiepenalty = \@M - \gdef\tie{\leavevmode\penalty\tiepenalty\ } -} - -% @: forces normal size whitespace following. -\def\:{\spacefactor=1000 } - -% @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} - -% @/ allows a line break. -\let\/=\allowbreak - -% @. is an end-of-sentence period. -\def\.{.\spacefactor=3000 } - -% @! is an end-of-sentence bang. -\def\!{!\spacefactor=3000 } - -% @? is an end-of-sentence query. -\def\?{?\spacefactor=3000 } - -% @w prevents a word break. Without the \leavevmode, @w at the -% beginning of a paragraph, when TeX is still in vertical mode, would -% produce a whole line of output instead of starting the paragraph. -\def\w#1{\leavevmode\hbox{#1}} - -% @group ... @end group forces ... to be all on one page, by enclosing -% it in a TeX vbox. We use \vtop instead of \vbox to construct the box -% to keep its height that of a normal line. According to the rules for -% \topskip (p.114 of the TeXbook), the glue inserted is -% max (\topskip - \ht (first item), 0). If that height is large, -% therefore, no glue is inserted, and the space between the headline and -% the text is small, which looks bad. -% -% Another complication is that the group might be very large. This can -% cause the glue on the previous page to be unduly stretched, because it -% does not have much material. In this case, it's better to add an -% explicit \vfill so that the extra space is at the bottom. The -% threshold for doing this is if the group is more than \vfilllimit -% percent of a page (\vfilllimit can be changed inside of @tex). -% -\newbox\groupbox -\def\vfilllimit{0.7} -% -\envdef\group{% - \ifnum\catcode`\^^M=\active \else - \errhelp = \groupinvalidhelp - \errmessage{@group invalid in context where filling is enabled}% - \fi - \startsavinginserts - % - \setbox\groupbox = \vtop\bgroup - % Do @comment since we are called inside an environment such as - % @example, where each end-of-line in the input causes an - % end-of-line in the output. We don't want the end-of-line after - % the `@group' to put extra space in the output. Since @group - % should appear on a line by itself (according to the Texinfo - % manual), we don't worry about eating any user text. - \comment -} -% -% The \vtop produces a box with normal height and large depth; thus, TeX puts -% \baselineskip glue before it, and (when the next line of text is done) -% \lineskip glue after it. Thus, space below is not quite equal to space -% above. But it's pretty close. -\def\Egroup{% - % To get correct interline space between the last line of the group - % and the first line afterwards, we have to propagate \prevdepth. - \endgraf % Not \par, as it may have been set to \lisppar. - \global\dimen1 = \prevdepth - \egroup % End the \vtop. - % \dimen0 is the vertical size of the group's box. - \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox - % \dimen2 is how much space is left on the page (more or less). - \dimen2 = \pageheight \advance\dimen2 by -\pagetotal - % if the group doesn't fit on the current page, and it's a big big - % group, force a page break. - \ifdim \dimen0 > \dimen2 - \ifdim \pagetotal < \vfilllimit\pageheight - \page - \fi - \fi - \box\groupbox - \prevdepth = \dimen1 - \checkinserts -} -% -% TeX puts in an \escapechar (i.e., `@') at the beginning of the help -% message, so this ends up printing `@group can only ...'. -% -\newhelp\groupinvalidhelp{% -group can only be used in environments such as @example,^^J% -where each line of input produces a line of output.} - -% @need space-in-mils -% forces a page break if there is not space-in-mils remaining. - -\newdimen\mil \mil=0.001in - -% Old definition--didn't work. -%\parseargdef\need{\par % -%% This method tries to make TeX break the page naturally -%% if the depth of the box does not fit. -%{\baselineskip=0pt% -%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak -%\prevdepth=-1000pt -%}} - -\parseargdef\need{% - % Ensure vertical mode, so we don't make a big box in the middle of a - % paragraph. - \par - % - % If the @need value is less than one line space, it's useless. - \dimen0 = #1\mil - \dimen2 = \ht\strutbox - \advance\dimen2 by \dp\strutbox - \ifdim\dimen0 > \dimen2 - % - % Do a \strut just to make the height of this box be normal, so the - % normal leading is inserted relative to the preceding line. - % And a page break here is fine. - \vtop to #1\mil{\strut\vfil}% - % - % TeX does not even consider page breaks if a penalty added to the - % main vertical list is 10000 or more. But in order to see if the - % empty box we just added fits on the page, we must make it consider - % page breaks. On the other hand, we don't want to actually break the - % page after the empty box. So we use a penalty of 9999. - % - % There is an extremely small chance that TeX will actually break the - % page at this \penalty, if there are no other feasible breakpoints in - % sight. (If the user is using lots of big @group commands, which - % almost-but-not-quite fill up a page, TeX will have a hard time doing - % good page breaking, for example.) However, I could not construct an - % example where a page broke at this \penalty; if it happens in a real - % document, then we can reconsider our strategy. - \penalty9999 - % - % Back up by the size of the box, whether we did a page break or not. - \kern -#1\mil - % - % Do not allow a page break right after this kern. - \nobreak - \fi -} - -% @br forces paragraph break (and is undocumented). - -\let\br = \par - -% @page forces the start of a new page. -% -\def\page{\par\vfill\supereject} - -% @exdent text.... -% outputs text on separate line in roman font, starting at standard page margin - -% This records the amount of indent in the innermost environment. -% That's how much \exdent should take out. -\newskip\exdentamount - -% This defn is used inside fill environments such as @defun. -\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break} - -% This defn is used inside nofill environments such as @example. -\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount - \leftline{\hskip\leftskip{\rm#1}}}} - -% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current -% paragraph. For more general purposes, use the \margin insertion -% class. WHICH is `l' or `r'. -% -\newskip\inmarginspacing \inmarginspacing=1cm -\def\strutdepth{\dp\strutbox} -% -\def\doinmargin#1#2{\strut\vadjust{% - \nobreak - \kern-\strutdepth - \vtop to \strutdepth{% - \baselineskip=\strutdepth - \vss - % if you have multiple lines of stuff to put here, you'll need to - % make the vbox yourself of the appropriate size. - \ifx#1l% - \llap{\ignorespaces #2\hskip\inmarginspacing}% - \else - \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}% - \fi - \null - }% -}} -\def\inleftmargin{\doinmargin l} -\def\inrightmargin{\doinmargin r} -% -% @inmargin{TEXT [, RIGHT-TEXT]} -% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right; -% else use TEXT for both). -% -\def\inmargin#1{\parseinmargin #1,,\finish} -\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing. - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0 > 0pt - \def\lefttext{#1}% have both texts - \def\righttext{#2}% - \else - \def\lefttext{#1}% have only one text - \def\righttext{#1}% - \fi - % - \ifodd\pageno - \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin - \else - \def\temp{\inleftmargin\lefttext}% - \fi - \temp -} - -% @include file insert text of that file as input. -% -\def\include{\parseargusing\filenamecatcodes\includezzz} -\def\includezzz#1{% - \pushthisfilestack - \def\thisfile{#1}% - {% - \makevalueexpandable - \def\temp{\input #1 }% - \expandafter - }\temp - \popthisfilestack -} -\def\filenamecatcodes{% - \catcode`\\=\other - \catcode`~=\other - \catcode`^=\other - \catcode`_=\other - \catcode`|=\other - \catcode`<=\other - \catcode`>=\other - \catcode`+=\other - \catcode`-=\other -} - -\def\pushthisfilestack{% - \expandafter\pushthisfilestackX\popthisfilestack\StackTerm -} -\def\pushthisfilestackX{% - \expandafter\pushthisfilestackY\thisfile\StackTerm -} -\def\pushthisfilestackY #1\StackTerm #2\StackTerm {% - \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}% -} - -\def\popthisfilestack{\errthisfilestackempty} -\def\errthisfilestackempty{\errmessage{Internal error: - the stack of filenames is empty.}} - -\def\thisfile{} - -% @center line -% outputs that line, centered. -% -\parseargdef\center{% - \ifhmode - \let\next\centerH - \else - \let\next\centerV - \fi - \next{\hfil \ignorespaces#1\unskip \hfil}% -} -\def\centerH#1{% - {% - \hfil\break - \advance\hsize by -\leftskip - \advance\hsize by -\rightskip - \line{#1}% - \break - }% -} -\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}} - -% @sp n outputs n lines of vertical space - -\parseargdef\sp{\vskip #1\baselineskip} - -% @comment ...line which is ignored... -% @c is the same as @comment -% @ignore ... @end ignore is another way to write a comment - -\def\comment{\begingroup \catcode`\^^M=\other% -\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% -\commentxxx} -{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} - -\let\c=\comment - -% @paragraphindent NCHARS -% We'll use ems for NCHARS, close enough. -% NCHARS can also be the word `asis' or `none'. -% We cannot feasibly implement @paragraphindent asis, though. -% -\def\asisword{asis} % no translation, these are keywords -\def\noneword{none} -% -\parseargdef\paragraphindent{% - \def\temp{#1}% - \ifx\temp\asisword - \else - \ifx\temp\noneword - \defaultparindent = 0pt - \else - \defaultparindent = #1em - \fi - \fi - \parindent = \defaultparindent -} - -% @exampleindent NCHARS -% We'll use ems for NCHARS like @paragraphindent. -% It seems @exampleindent asis isn't necessary, but -% I preserve it to make it similar to @paragraphindent. -\parseargdef\exampleindent{% - \def\temp{#1}% - \ifx\temp\asisword - \else - \ifx\temp\noneword - \lispnarrowing = 0pt - \else - \lispnarrowing = #1em - \fi - \fi -} - -% @firstparagraphindent WORD -% If WORD is `none', then suppress indentation of the first paragraph -% after a section heading. If WORD is `insert', then do indent at such -% paragraphs. -% -% The paragraph indentation is suppressed or not by calling -% \suppressfirstparagraphindent, which the sectioning commands do. -% We switch the definition of this back and forth according to WORD. -% By default, we suppress indentation. -% -\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent} -\def\insertword{insert} -% -\parseargdef\firstparagraphindent{% - \def\temp{#1}% - \ifx\temp\noneword - \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent - \else\ifx\temp\insertword - \let\suppressfirstparagraphindent = \relax - \else - \errhelp = \EMsimple - \errmessage{Unknown @firstparagraphindent option `\temp'}% - \fi\fi -} - -% Here is how we actually suppress indentation. Redefine \everypar to -% \kern backwards by \parindent, and then reset itself to empty. -% -% We also make \indent itself not actually do anything until the next -% paragraph. -% -\gdef\dosuppressfirstparagraphindent{% - \gdef\indent{% - \restorefirstparagraphindent - \indent - }% - \gdef\noindent{% - \restorefirstparagraphindent - \noindent - }% - \global\everypar = {% - \kern -\parindent - \restorefirstparagraphindent - }% -} - -\gdef\restorefirstparagraphindent{% - \global \let \indent = \ptexindent - \global \let \noindent = \ptexnoindent - \global \everypar = {}% -} - - -% @asis just yields its argument. Used with @table, for example. -% -\def\asis#1{#1} - -% @math outputs its argument in math mode. -% -% One complication: _ usually means subscripts, but it could also mean -% an actual _ character, as in @math{@var{some_variable} + 1}. So make -% _ active, and distinguish by seeing if the current family is \slfam, -% which is what @var uses. -{ - \catcode\underChar = \active - \gdef\mathunderscore{% - \catcode\underChar=\active - \def_{\ifnum\fam=\slfam \_\else\sb\fi}% - } -} -% Another complication: we want \\ (and @\) to output a \ character. -% FYI, plain.tex uses \\ as a temporary control sequence (why?), but -% this is not advertised and we don't care. Texinfo does not -% otherwise define @\. -% -% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. -\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} -% -\def\math{% - \tex - \mathunderscore - \let\\ = \mathbackslash - \mathactive - $\finishmath -} -\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. - -% Some active characters (such as <) are spaced differently in math. -% We have to reset their definitions in case the @math was an argument -% to a command which sets the catcodes (such as @item or @section). -% -{ - \catcode`^ = \active - \catcode`< = \active - \catcode`> = \active - \catcode`+ = \active - \gdef\mathactive{% - \let^ = \ptexhat - \let< = \ptexless - \let> = \ptexgtr - \let+ = \ptexplus - } -} - -% @bullet and @minus need the same treatment as @math, just above. -\def\bullet{$\ptexbullet$} -\def\minus{$-$} - -% @dots{} outputs an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in a typewriter -% font as three actual period characters. -% -\def\dots{% - \leavevmode - \hbox to 1.5em{% - \hskip 0pt plus 0.25fil - .\hfil.\hfil.% - \hskip 0pt plus 0.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \dots - \spacefactor=3000 -} - -% @comma{} is so commas can be inserted into text without messing up -% Texinfo's parsing. -% -\let\comma = , - -% @refill is a no-op. -\let\refill=\relax - -% If working on a large document in chapters, it is convenient to -% be able to disable indexing, cross-referencing, and contents, for test runs. -% This is done with @novalidate (before @setfilename). -% -\newif\iflinks \linkstrue % by default we want the aux files. -\let\novalidate = \linksfalse - -% @setfilename is done at the beginning of every texinfo file. -% So open here the files we need to have open while reading the input. -% This makes it possible to make a .fmt file for texinfo. -\def\setfilename{% - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \iflinks - \tryauxfile - % Open the new aux file. TeX will close it automatically at exit. - \immediate\openout\auxfile=\jobname.aux - \fi % \openindices needs to do some work in any case. - \openindices - \let\setfilename=\comment % Ignore extra @setfilename cmds. - % - % If texinfo.cnf is present on the system, read it. - % Useful for site-wide @afourpaper, etc. - \openin 1 texinfo.cnf - \ifeof 1 \else \input texinfo.cnf \fi - \closein 1 - % - \comment % Ignore the actual filename. -} - -% Called from \setfilename. -% -\def\openindices{% - \newindex{cp}% - \newcodeindex{fn}% - \newcodeindex{vr}% - \newcodeindex{tp}% - \newcodeindex{ky}% - \newcodeindex{pg}% -} - -% @bye. -\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} - - -\message{pdf,} -% adobe `portable' document format -\newcount\tempnum -\newcount\lnkcount -\newtoks\filename -\newcount\filenamelength -\newcount\pgn -\newtoks\toksA -\newtoks\toksB -\newtoks\toksC -\newtoks\toksD -\newbox\boxA -\newcount\countA -\newif\ifpdf -\newif\ifpdfmakepagedest - -% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 -% can be set). So we test for \relax and 0 as well as \undefined, -% borrowed from ifpdf.sty. -\ifx\pdfoutput\undefined -\else - \ifx\pdfoutput\relax - \else - \ifcase\pdfoutput - \else - \pdftrue - \fi - \fi -\fi -% -\ifpdf - \input pdfcolor - \pdfcatalog{/PageMode /UseOutlines}% - \def\dopdfimage#1#2#3{% - \def\imagewidth{#2}% - \def\imageheight{#3}% - % without \immediate, pdftex seg faults when the same image is - % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) - \ifnum\pdftexversion < 14 - \immediate\pdfimage - \else - \immediate\pdfximage - \fi - \ifx\empty\imagewidth\else width \imagewidth \fi - \ifx\empty\imageheight\else height \imageheight \fi - \ifnum\pdftexversion<13 - #1.pdf% - \else - {#1.pdf}% - \fi - \ifnum\pdftexversion < 14 \else - \pdfrefximage \pdflastximage - \fi} - \def\pdfmkdest#1{{% - % We have to set dummies so commands such as @code in a section title - % aren't expanded. - \atdummies - \normalturnoffactive - \pdfdest name{#1} xyz% - }} - \def\pdfmkpgn#1{#1} - \let\linkcolor = \Blue % was Cyan, but that seems light? - \def\endlink{\Black\pdfendlink} - % Adding outlines to PDF; macros for calculating structure of outlines - % come from Petr Olsak - \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0% - \else \csname#1\endcsname \fi} - \def\advancenumber#1{\tempnum=\expnumber{#1}\relax - \advance\tempnum by 1 - \expandafter\xdef\csname#1\endcsname{\the\tempnum}} - % - % #1 is the section text. #2 is the pdf expression for the number - % of subentries (or empty, for subsubsections). #3 is the node - % text, which might be empty if this toc entry had no - % corresponding node. #4 is the page number. - % - \def\dopdfoutline#1#2#3#4{% - % Generate a link to the node text if that exists; else, use the - % page number. We could generate a destination for the section - % text in the case where a section has no node, but it doesn't - % seem worthwhile, since most documents are normally structured. - \def\pdfoutlinedest{#3}% - \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi - % - \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}% - } - % - \def\pdfmakeoutlines{% - \begingroup - % Thanh's hack / proper braces in bookmarks - \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace - \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace - % - % Read toc silently, to get counts of subentries for \pdfoutline. - \def\numchapentry##1##2##3##4{% - \def\thischapnum{##2}% - \def\thissecnum{0}% - \def\thissubsecnum{0}% - }% - \def\numsecentry##1##2##3##4{% - \advancenumber{chap\thischapnum}% - \def\thissecnum{##2}% - \def\thissubsecnum{0}% - }% - \def\numsubsecentry##1##2##3##4{% - \advancenumber{sec\thissecnum}% - \def\thissubsecnum{##2}% - }% - \def\numsubsubsecentry##1##2##3##4{% - \advancenumber{subsec\thissubsecnum}% - }% - \def\thischapnum{0}% - \def\thissecnum{0}% - \def\thissubsecnum{0}% - % - % use \def rather than \let here because we redefine \chapentry et - % al. a second time, below. - \def\appentry{\numchapentry}% - \def\appsecentry{\numsecentry}% - \def\appsubsecentry{\numsubsecentry}% - \def\appsubsubsecentry{\numsubsubsecentry}% - \def\unnchapentry{\numchapentry}% - \def\unnsecentry{\numsecentry}% - \def\unnsubsecentry{\numsubsecentry}% - \def\unnsubsubsecentry{\numsubsubsecentry}% - \input \jobname.toc - % - % Read toc second time, this time actually producing the outlines. - % The `-' means take the \expnumber as the absolute number of - % subentries, which we calculated on our first read of the .toc above. - % - % We use the node names as the destinations. - \def\numchapentry##1##2##3##4{% - \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}% - \def\numsecentry##1##2##3##4{% - \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}% - \def\numsubsecentry##1##2##3##4{% - \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}% - \def\numsubsubsecentry##1##2##3##4{% count is always zero - \dopdfoutline{##1}{}{##3}{##4}}% - % - % PDF outlines are displayed using system fonts, instead of - % document fonts. Therefore we cannot use special characters, - % since the encoding is unknown. For example, the eogonek from - % Latin 2 (0xea) gets translated to a | character. Info from - % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. - % - % xx to do this right, we have to translate 8-bit characters to - % their "best" equivalent, based on the @documentencoding. Right - % now, I guess we'll just let the pdf reader have its way. - \indexnofonts - \turnoffactive - \input \jobname.toc - \endgroup - } - % - \def\makelinks #1,{% - \def\params{#1}\def\E{END}% - \ifx\params\E - \let\nextmakelinks=\relax - \else - \let\nextmakelinks=\makelinks - \ifnum\lnkcount>0,\fi - \picknum{#1}% - \startlink attr{/Border [0 0 0]} - goto name{\pdfmkpgn{\the\pgn}}% - \linkcolor #1% - \advance\lnkcount by 1% - \endlink - \fi - \nextmakelinks - } - \def\picknum#1{\expandafter\pn#1} - \def\pn#1{% - \def\p{#1}% - \ifx\p\lbrace - \let\nextpn=\ppn - \else - \let\nextpn=\ppnn - \def\first{#1} - \fi - \nextpn - } - \def\ppn#1{\pgn=#1\gobble} - \def\ppnn{\pgn=\first} - \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,} - \def\skipspaces#1{\def\PP{#1}\def\D{|}% - \ifx\PP\D\let\nextsp\relax - \else\let\nextsp\skipspaces - \ifx\p\space\else\addtokens{\filename}{\PP}% - \advance\filenamelength by 1 - \fi - \fi - \nextsp} - \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax} - \ifnum\pdftexversion < 14 - \let \startlink \pdfannotlink - \else - \let \startlink \pdfstartlink - \fi - \def\pdfurl#1{% - \begingroup - \normalturnoffactive\def\@{@}% - \makevalueexpandable - \leavevmode\Red - \startlink attr{/Border [0 0 0]}% - user{/Subtype /Link /A << /S /URI /URI (#1) >>}% - \endgroup} - \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}} - \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks} - \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks} - \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}} - \def\maketoks{% - \expandafter\poptoks\the\toksA|ENDTOKS|\relax - \ifx\first0\adn0 - \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3 - \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6 - \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9 - \else - \ifnum0=\countA\else\makelink\fi - \ifx\first.\let\next=\done\else - \let\next=\maketoks - \addtokens{\toksB}{\the\toksD} - \ifx\first,\addtokens{\toksB}{\space}\fi - \fi - \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi - \next} - \def\makelink{\addtokens{\toksB}% - {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0} - \def\pdflink#1{% - \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}} - \linkcolor #1\endlink} - \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} -\else - \let\pdfmkdest = \gobble - \let\pdfurl = \gobble - \let\endlink = \relax - \let\linkcolor = \relax - \let\pdfmakeoutlines = \relax -\fi % \ifx\pdfoutput - - -\message{fonts,} - -% Change the current font style to #1, remembering it in \curfontstyle. -% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in -% italics, not bold italics. -% -\def\setfontstyle#1{% - \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd. - \csname ten#1\endcsname % change the current font -} - -% Select #1 fonts with the current style. -% -\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname} - -\def\rm{\fam=0 \setfontstyle{rm}} -\def\it{\fam=\itfam \setfontstyle{it}} -\def\sl{\fam=\slfam \setfontstyle{sl}} -\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} -\def\tt{\fam=\ttfam \setfontstyle{tt}} - -% Texinfo sort of supports the sans serif font style, which plain TeX does not. -% So we set up a \sf. -\newfam\sffam -\def\sf{\fam=\sffam \setfontstyle{sf}} -\let\li = \sf % Sometimes we call it \li, not \sf. - -% We don't need math for this font style. -\def\ttsl{\setfontstyle{ttsl}} - -% Default leading. -\newdimen\textleading \textleading = 13.2pt - -% Set the baselineskip to #1, and the lineskip and strut size -% correspondingly. There is no deep meaning behind these magic numbers -% used as factors; they just match (closely enough) what Knuth defined. -% -\def\lineskipfactor{.08333} -\def\strutheightpercent{.70833} -\def\strutdepthpercent {.29167} -% -\def\setleading#1{% - \normalbaselineskip = #1\relax - \normallineskip = \lineskipfactor\normalbaselineskip - \normalbaselines - \setbox\strutbox =\hbox{% - \vrule width0pt height\strutheightpercent\baselineskip - depth \strutdepthpercent \baselineskip - }% -} - -% Set the font macro #1 to the font named #2, adding on the -% specified font prefix (normally `cm'). -% #3 is the font's design size, #4 is a scale factor -\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4} - -% Use cm as the default font prefix. -% To specify the font prefix, you must define \fontprefix -% before you read in texinfo.tex. -\ifx\fontprefix\undefined -\def\fontprefix{cm} -\fi -% Support font families that don't use the same naming scheme as CM. -\def\rmshape{r} -\def\rmbshape{bx} %where the normal face is bold -\def\bfshape{b} -\def\bxshape{bx} -\def\ttshape{tt} -\def\ttbshape{tt} -\def\ttslshape{sltt} -\def\itshape{ti} -\def\itbshape{bxti} -\def\slshape{sl} -\def\slbshape{bxsl} -\def\sfshape{ss} -\def\sfbshape{ss} -\def\scshape{csc} -\def\scbshape{csc} - -% Text fonts (11.2pt, magstep1). -\def\textnominalsize{11pt} -\edef\mainmagstep{\magstephalf} -\setfont\textrm\rmshape{10}{\mainmagstep} -\setfont\texttt\ttshape{10}{\mainmagstep} -\setfont\textbf\bfshape{10}{\mainmagstep} -\setfont\textit\itshape{10}{\mainmagstep} -\setfont\textsl\slshape{10}{\mainmagstep} -\setfont\textsf\sfshape{10}{\mainmagstep} -\setfont\textsc\scshape{10}{\mainmagstep} -\setfont\textttsl\ttslshape{10}{\mainmagstep} -\font\texti=cmmi10 scaled \mainmagstep -\font\textsy=cmsy10 scaled \mainmagstep - -% A few fonts for @defun names and args. -\setfont\defbf\bfshape{10}{\magstep1} -\setfont\deftt\ttshape{10}{\magstep1} -\setfont\defttsl\ttslshape{10}{\magstep1} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} - -% Fonts for indices, footnotes, small examples (9pt). -\def\smallnominalsize{9pt} -\setfont\smallrm\rmshape{9}{1000} -\setfont\smalltt\ttshape{9}{1000} -\setfont\smallbf\bfshape{10}{900} -\setfont\smallit\itshape{9}{1000} -\setfont\smallsl\slshape{9}{1000} -\setfont\smallsf\sfshape{9}{1000} -\setfont\smallsc\scshape{10}{900} -\setfont\smallttsl\ttslshape{10}{900} -\font\smalli=cmmi9 -\font\smallsy=cmsy9 - -% Fonts for small examples (8pt). -\def\smallernominalsize{8pt} -\setfont\smallerrm\rmshape{8}{1000} -\setfont\smallertt\ttshape{8}{1000} -\setfont\smallerbf\bfshape{10}{800} -\setfont\smallerit\itshape{8}{1000} -\setfont\smallersl\slshape{8}{1000} -\setfont\smallersf\sfshape{8}{1000} -\setfont\smallersc\scshape{10}{800} -\setfont\smallerttsl\ttslshape{10}{800} -\font\smalleri=cmmi8 -\font\smallersy=cmsy8 - -% Fonts for title page (20.4pt): -\def\titlenominalsize{20pt} -\setfont\titlerm\rmbshape{12}{\magstep3} -\setfont\titleit\itbshape{10}{\magstep4} -\setfont\titlesl\slbshape{10}{\magstep4} -\setfont\titlett\ttbshape{12}{\magstep3} -\setfont\titlettsl\ttslshape{10}{\magstep4} -\setfont\titlesf\sfbshape{17}{\magstep1} -\let\titlebf=\titlerm -\setfont\titlesc\scbshape{10}{\magstep4} -\font\titlei=cmmi12 scaled \magstep3 -\font\titlesy=cmsy10 scaled \magstep4 -\def\authorrm{\secrm} -\def\authortt{\sectt} - -% Chapter (and unnumbered) fonts (17.28pt). -\def\chapnominalsize{17pt} -\setfont\chaprm\rmbshape{12}{\magstep2} -\setfont\chapit\itbshape{10}{\magstep3} -\setfont\chapsl\slbshape{10}{\magstep3} -\setfont\chaptt\ttbshape{12}{\magstep2} -\setfont\chapttsl\ttslshape{10}{\magstep3} -\setfont\chapsf\sfbshape{17}{1000} -\let\chapbf=\chaprm -\setfont\chapsc\scbshape{10}{\magstep3} -\font\chapi=cmmi12 scaled \magstep2 -\font\chapsy=cmsy10 scaled \magstep3 - -% Section fonts (14.4pt). -\def\secnominalsize{14pt} -\setfont\secrm\rmbshape{12}{\magstep1} -\setfont\secit\itbshape{10}{\magstep2} -\setfont\secsl\slbshape{10}{\magstep2} -\setfont\sectt\ttbshape{12}{\magstep1} -\setfont\secttsl\ttslshape{10}{\magstep2} -\setfont\secsf\sfbshape{12}{\magstep1} -\let\secbf\secrm -\setfont\secsc\scbshape{10}{\magstep2} -\font\seci=cmmi12 scaled \magstep1 -\font\secsy=cmsy10 scaled \magstep2 - -% Subsection fonts (13.15pt). -\def\ssecnominalsize{13pt} -\setfont\ssecrm\rmbshape{12}{\magstephalf} -\setfont\ssecit\itbshape{10}{1315} -\setfont\ssecsl\slbshape{10}{1315} -\setfont\ssectt\ttbshape{12}{\magstephalf} -\setfont\ssecttsl\ttslshape{10}{1315} -\setfont\ssecsf\sfbshape{12}{\magstephalf} -\let\ssecbf\ssecrm -\setfont\ssecsc\scbshape{10}{1315} -\font\sseci=cmmi12 scaled \magstephalf -\font\ssecsy=cmsy10 scaled 1315 - -% Reduced fonts for @acro in text (10pt). -\def\reducednominalsize{10pt} -\setfont\reducedrm\rmshape{10}{1000} -\setfont\reducedtt\ttshape{10}{1000} -\setfont\reducedbf\bfshape{10}{1000} -\setfont\reducedit\itshape{10}{1000} -\setfont\reducedsl\slshape{10}{1000} -\setfont\reducedsf\sfshape{10}{1000} -\setfont\reducedsc\scshape{10}{1000} -\setfont\reducedttsl\ttslshape{10}{1000} -\font\reducedi=cmmi10 -\font\reducedsy=cmsy10 - -% In order for the font changes to affect most math symbols and letters, -% we have to define the \textfont of the standard families. Since -% texinfo doesn't allow for producing subscripts and superscripts except -% in the main text, we don't bother to reset \scriptfont and -% \scriptscriptfont (which would also require loading a lot more fonts). -% -\def\resetmathfonts{% - \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy - \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf - \textfont\ttfam=\tentt \textfont\sffam=\tensf -} - -% The font-changing commands redefine the meanings of \tenSTYLE, instead -% of just \STYLE. We do this because \STYLE needs to also set the -% current \fam for math mode. Our \STYLE (e.g., \rm) commands hardwire -% \tenSTYLE to set the current font. -% -% Each font-changing command also sets the names \lsize (one size lower) -% and \lllsize (three sizes lower). These relative commands are used in -% the LaTeX logo and acronyms. -% -% This all needs generalizing, badly. -% -\def\textfonts{% - \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl - \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy - \let\tenttsl=\textttsl - \def\curfontsize{text}% - \def\lsize{reduced}\def\lllsize{smaller}% - \resetmathfonts \setleading{\textleading}} -\def\titlefonts{% - \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl - \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc - \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy - \let\tenttsl=\titlettsl - \def\curfontsize{title}% - \def\lsize{chap}\def\lllsize{subsec}% - \resetmathfonts \setleading{25pt}} -\def\titlefont#1{{\titlefonts\rm #1}} -\def\chapfonts{% - \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl - \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy - \let\tenttsl=\chapttsl - \def\curfontsize{chap}% - \def\lsize{sec}\def\lllsize{text}% - \resetmathfonts \setleading{19pt}} -\def\secfonts{% - \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl - \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy - \let\tenttsl=\secttsl - \def\curfontsize{sec}% - \def\lsize{subsec}\def\lllsize{reduced}% - \resetmathfonts \setleading{16pt}} -\def\subsecfonts{% - \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl - \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy - \let\tenttsl=\ssecttsl - \def\curfontsize{ssec}% - \def\lsize{text}\def\lllsize{small}% - \resetmathfonts \setleading{15pt}} -\let\subsubsecfonts = \subsecfonts -\def\reducedfonts{% - \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl - \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc - \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy - \let\tenttsl=\reducedttsl - \def\curfontsize{reduced}% - \def\lsize{small}\def\lllsize{smaller}% - \resetmathfonts \setleading{10.5pt}} -\def\smallfonts{% - \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl - \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc - \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy - \let\tenttsl=\smallttsl - \def\curfontsize{small}% - \def\lsize{smaller}\def\lllsize{smaller}% - \resetmathfonts \setleading{10.5pt}} -\def\smallerfonts{% - \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl - \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc - \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy - \let\tenttsl=\smallerttsl - \def\curfontsize{smaller}% - \def\lsize{smaller}\def\lllsize{smaller}% - \resetmathfonts \setleading{9.5pt}} - -% Set the fonts to use with the @small... environments. -\let\smallexamplefonts = \smallfonts - -% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample -% can fit this many characters: -% 8.5x11=86 smallbook=72 a4=90 a5=69 -% If we use \scriptfonts (8pt), then we can fit this many characters: -% 8.5x11=90+ smallbook=80 a4=90+ a5=77 -% For me, subjectively, the few extra characters that fit aren't worth -% the additional smallness of 8pt. So I'm making the default 9pt. -% -% By the way, for comparison, here's what fits with @example (10pt): -% 8.5x11=71 smallbook=60 a4=75 a5=58 -% -% I wish the USA used A4 paper. -% --karl, 24jan03. - - -% Set up the default fonts, so we can use them for creating boxes. -% -\textfonts \rm - -% Define these so they can be easily changed for other fonts. -\def\angleleft{$\langle$} -\def\angleright{$\rangle$} - -% Count depth in font-changes, for error checks -\newcount\fontdepth \fontdepth=0 - -% Fonts for short table of contents. -\setfont\shortcontrm\rmshape{12}{1000} -\setfont\shortcontbf\bfshape{10}{\magstep1} % no cmb12 -\setfont\shortcontsl\slshape{12}{1000} -\setfont\shortconttt\ttshape{12}{1000} - -%% Add scribe-like font environments, plus @l for inline lisp (usually sans -%% serif) and @ii for TeX italic - -% \smartitalic{ARG} outputs arg in italics, followed by an italic correction -% unless the following character is such as not to need one. -\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else - \ptexslash\fi\fi\fi} -\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} -\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} - -% like \smartslanted except unconditionally uses \ttsl. -% @var is set to this for defun arguments. -\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} - -% like \smartslanted except unconditionally use \sl. We never want -% ttsl for book titles, do we? -\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} - -\let\i=\smartitalic -\let\slanted=\smartslanted -\let\var=\smartslanted -\let\dfn=\smartslanted -\let\emph=\smartitalic - -% @b, explicit bold. -\def\b#1{{\bf #1}} -\let\strong=\b - -% @sansserif, explicit sans. -\def\sansserif#1{{\sf #1}} - -% We can't just use \exhyphenpenalty, because that only has effect at -% the end of a paragraph. Restore normal hyphenation at the end of the -% group within which \nohyphenation is presumably called. -% -\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation} -\def\restorehyphenation{\hyphenchar\font = `- } - -% Set sfcode to normal for the chars that usually have another value. -% Can't use plain's \frenchspacing because it uses the `\x notation, and -% sometimes \x has an active definition that messes things up. -% -\catcode`@=11 - \def\frenchspacing{% - \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m - \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m - } -\catcode`@=\other - -\def\t#1{% - {\tt \rawbackslash \frenchspacing #1}% - \null -} -\def\samp#1{`\tclose{#1}'\null} -\setfont\keyrm\rmshape{8}{1000} -\font\keysy=cmsy9 -\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% - \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% - \vbox{\hrule\kern-0.4pt - \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% - \kern-0.4pt\hrule}% - \kern-.06em\raise0.4pt\hbox{\angleright}}}} -% The old definition, with no lozenge: -%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -% @file, @option are the same as @samp. -\let\file=\samp -\let\option=\samp - -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. -\def\tclose#1{% - {% - % Change normal interword space to be same as for the current font. - \spaceskip = \fontdimen2\font - % - % Switch to typewriter. - \tt - % - % But `\ ' produces the large typewriter interword space. - \def\ {{\spaceskip = 0pt{} }}% - % - % Turn off hyphenation. - \nohyphenation - % - \rawbackslash - \frenchspacing - #1% - }% - \null -} - -% We *must* turn on hyphenation at `-' and `_' in @code. -% Otherwise, it is too hard to avoid overfull hboxes -% in the Emacs manual, the Library manual, etc. - -% Unfortunately, TeX uses one parameter (\hyphenchar) to control -% both hyphenation at - and hyphenation within words. -% We must therefore turn them both off (\tclose does that) -% and arrange explicitly to hyphenate at a dash. -% -- rms. -{ - \catcode`\-=\active - \catcode`\_=\active - % - \global\def\code{\begingroup - \catcode`\-=\active \let-\codedash - \catcode`\_=\active \let_\codeunder - \codex - } -} - -\def\realdash{-} -\def\codedash{-\discretionary{}{}{}} -\def\codeunder{% - % this is all so @math{@code{var_name}+1} can work. In math mode, _ - % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.) - % will therefore expand the active definition of _, which is us - % (inside @code that is), therefore an endless loop. - \ifusingtt{\ifmmode - \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_. - \else\normalunderscore \fi - \discretionary{}{}{}}% - {\_}% -} -\def\codex #1{\tclose{#1}\endgroup} - -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. - -% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), -% `example' (@kbd uses ttsl only inside of @example and friends), -% or `code' (@kbd uses normal tty font always). -\parseargdef\kbdinputstyle{% - \def\arg{#1}% - \ifx\arg\worddistinct - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\arg\wordexample - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\arg\wordcode - \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% - \else - \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\arg'}% - \fi\fi\fi -} -\def\worddistinct{distinct} -\def\wordexample{example} -\def\wordcode{code} - -% Default is `distinct.' -\kbdinputstyle distinct - -\def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\look}}\fi -\else{\tclose{\kbdfont\look}}\fi} - -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code -\let\command=\code - -% @uref (abbreviation for `urlref') takes an optional (comma-separated) -% second argument specifying the text to display and an optional third -% arg as text to display instead of (rather than in addition to) the url -% itself. First (mandatory) arg is the url. Perhaps eventually put in -% a hypertex \special here. -% -\def\uref#1{\douref #1,,,\finish} -\def\douref#1,#2,#3,#4\finish{\begingroup - \unsepspaces - \pdfurl{#1}% - \setbox0 = \hbox{\ignorespaces #3}% - \ifdim\wd0 > 0pt - \unhbox0 % third arg given, show only that - \else - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0 > 0pt - \ifpdf - \unhbox0 % PDF: 2nd arg given, show only it - \else - \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url - \fi - \else - \code{#1}% only url given, so show it - \fi - \fi - \endlink -\endgroup} - -% @url synonym for @uref, since that's how everyone uses it. -% -\let\url=\uref - -% rms does not like angle brackets --karl, 17may97. -% So now @email is just like @uref, unless we are pdf. -% -%\def\email#1{\angleleft{\tt #1}\angleright} -\ifpdf - \def\email#1{\doemail#1,,\finish} - \def\doemail#1,#2,#3\finish{\begingroup - \unsepspaces - \pdfurl{mailto:#1}% - \setbox0 = \hbox{\ignorespaces #2}% - \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi - \endlink - \endgroup} -\else - \let\email=\uref -\fi - -% Check if we are currently using a typewriter font. Since all the -% Computer Modern typewriter fonts have zero interword stretch (and -% shrink), and it is reasonable to expect all typewriter fonts to have -% this property, we can check that font parameter. -% -\def\ifmonospace{\ifdim\fontdimen3\font=0pt } - -% Typeset a dimension, e.g., `in' or `pt'. The only reason for the -% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. -% -\def\dmn#1{\thinspace #1} - -\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} - -% @l was never documented to mean ``switch to the Lisp font'', -% and it is not used as such in any manual I can find. We need it for -% Polish suppressed-l. --karl, 22sep96. -%\def\l#1{{\li #1}\null} - -% Explicit font changes: @r, @sc, undocumented @ii. -\def\r#1{{\rm #1}} % roman font -\def\sc#1{{\smallcaps#1}} % smallcaps font -\def\ii#1{{\it #1}} % italic font - -% @acronym for "FBI", "NATO", and the like. -% We print this one point size smaller, since it's intended for -% all-uppercase. -% -\def\acronym#1{\doacronym #1,,\finish} -\def\doacronym#1,#2,#3\finish{% - {\selectfonts\lsize #1}% - \def\temp{#2}% - \ifx\temp\empty \else - \space ({\unsepspaces \ignorespaces \temp \unskip})% - \fi -} - -% @abbr for "Comput. J." and the like. -% No font change, but don't do end-of-sentence spacing. -% -\def\abbr#1{\doabbr #1,,\finish} -\def\doabbr#1,#2,#3\finish{% - {\frenchspacing #1}% - \def\temp{#2}% - \ifx\temp\empty \else - \space ({\unsepspaces \ignorespaces \temp \unskip})% - \fi -} - -% @pounds{} is a sterling sign, which Knuth put in the CM italic font. -% -\def\pounds{{\it\$}} - -% @euro{} comes from a separate font, depending on the current style. -% We use the free feym* fonts from the eurosym package by Henrik -% Theiling, which support regular, slanted, bold and bold slanted (and -% "outlined" (blackboard board, sort of) versions, which we don't need). -% It is available from http://www.ctan.org/tex-archive/fonts/eurosym. -% -% Although only regular is the truly official Euro symbol, we ignore -% that. The Euro is designed to be slightly taller than the regular -% font height. -% -% feymr - regular -% feymo - slanted -% feybr - bold -% feybo - bold slanted -% -% There is no good (free) typewriter version, to my knowledge. -% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. -% Hmm. -% -% Also doesn't work in math. Do we need to do math with euro symbols? -% Hope not. -% -% -\def\euro{{\eurofont e}} -\def\eurofont{% - % We set the font at each command, rather than predefining it in - % \textfonts and the other font-switching commands, so that - % installations which never need the symbold don't have to have the - % font installed. - % - % There is only one designed size (nominal 10pt), so we always scale - % that to the current nominal size. - % - % By the way, simply using "at 1em" works for cmr10 and the like, but - % does not work for cmbx10 and other extended/shrunken fonts. - % - \def\eurosize{\csname\curfontsize nominalsize\endcsname}% - % - \ifx\curfontstyle\bfstylename - % bold: - \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize - \else - % regular: - \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize - \fi - \thiseurofont -} - -% @registeredsymbol - R in a circle. The font for the R should really -% be smaller yet, but lllsize is the best we can do for now. -% Adapted from the plain.tex definition of \copyright. -% -\def\registeredsymbol{% - $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}% - \hfil\crcr\Orb}}% - }$% -} - -% Laurent Siebenmann reports \Orb undefined with: -% Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 -% so we'll define it if necessary. -% -\ifx\Orb\undefined -\def\Orb{\mathhexbox20D} -\fi - - -\message{page headings,} - -\newskip\titlepagetopglue \titlepagetopglue = 1.5in -\newskip\titlepagebottomglue \titlepagebottomglue = 2pc - -% First the title page. Must do @settitle before @titlepage. -\newif\ifseenauthor -\newif\iffinishedtitlepage - -% Do an implicit @contents or @shortcontents after @end titlepage if the -% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage. -% -\newif\ifsetcontentsaftertitlepage - \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue -\newif\ifsetshortcontentsaftertitlepage - \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue - -\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% - \endgroup\page\hbox{}\page} - -\envdef\titlepage{% - % Open one extra group, as we want to close it in the middle of \Etitlepage. - \begingroup - \parindent=0pt \textfonts - % Leave some space at the very top of the page. - \vglue\titlepagetopglue - % No rule at page bottom unless we print one at the top with @title. - \finishedtitlepagetrue - % - % Most title ``pages'' are actually two pages long, with space - % at the top of the second. We don't want the ragged left on the second. - \let\oldpage = \page - \def\page{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - \let\page = \oldpage - \page - \null - }% -} - -\def\Etitlepage{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - % It is important to do the page break before ending the group, - % because the headline and footline are only empty inside the group. - % If we use the new definition of \page, we always get a blank page - % after the title page, which we certainly don't want. - \oldpage - \endgroup - % - % Need this before the \...aftertitlepage checks so that if they are - % in effect the toc pages will come out with page numbers. - \HEADINGSon - % - % If they want short, they certainly want long too. - \ifsetshortcontentsaftertitlepage - \shortcontents - \contents - \global\let\shortcontents = \relax - \global\let\contents = \relax - \fi - % - \ifsetcontentsaftertitlepage - \contents - \global\let\contents = \relax - \global\let\shortcontents = \relax - \fi -} - -\def\finishtitlepage{% - \vskip4pt \hrule height 2pt width \hsize - \vskip\titlepagebottomglue - \finishedtitlepagetrue -} - -%%% Macros to be used within @titlepage: - -\let\subtitlerm=\tenrm -\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} - -\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines - \let\tt=\authortt} - -\parseargdef\title{% - \checkenv\titlepage - \leftline{\titlefonts\rm #1} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt width \hsize \vskip4pt -} - -\parseargdef\subtitle{% - \checkenv\titlepage - {\subtitlefont \rightline{#1}}% -} - -% @author should come last, but may come many times. -% It can also be used inside @quotation. -% -\parseargdef\author{% - \def\temp{\quotation}% - \ifx\thisenv\temp - \def\quotationauthor{#1}% printed in \Equotation. - \else - \checkenv\titlepage - \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi - {\authorfont \leftline{#1}}% - \fi -} - - -%%% Set up page headings and footings. - -\let\thispage=\folio - -\newtoks\evenheadline % headline on even pages -\newtoks\oddheadline % headline on odd pages -\newtoks\evenfootline % footline on even pages -\newtoks\oddfootline % footline on odd pages - -% Now make TeX use those variables -\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline - \else \the\evenheadline \fi}} -\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline - \else \the\evenfootline \fi}\HEADINGShook} -\let\HEADINGShook=\relax - -% Commands to set those variables. -% For example, this is what @headings on does -% @evenheading @thistitle|@thispage|@thischapter -% @oddheading @thischapter|@thispage|@thistitle -% @evenfooting @thisfile|| -% @oddfooting ||@thisfile - - -\def\evenheading{\parsearg\evenheadingxxx} -\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish} -\def\evenheadingyyy #1\|#2\|#3\|#4\finish{% -\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\def\oddheading{\parsearg\oddheadingxxx} -\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish} -\def\oddheadingyyy #1\|#2\|#3\|#4\finish{% -\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}% - -\def\evenfooting{\parsearg\evenfootingxxx} -\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish} -\def\evenfootingyyy #1\|#2\|#3\|#4\finish{% -\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\def\oddfooting{\parsearg\oddfootingxxx} -\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish} -\def\oddfootingyyy #1\|#2\|#3\|#4\finish{% - \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}% - % - % Leave some space for the footline. Hopefully ok to assume - % @evenfooting will not be used by itself. - \global\advance\pageheight by -\baselineskip - \global\advance\vsize by -\baselineskip -} - -\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}} - - -% @headings double turns headings on for double-sided printing. -% @headings single turns headings on for single-sided printing. -% @headings off turns them off. -% @headings on same as @headings double, retained for compatibility. -% @headings after turns on double-sided headings after this page. -% @headings doubleafter turns on double-sided headings after this page. -% @headings singleafter turns on single-sided headings after this page. -% By default, they are off at the start of a document, -% and turned `on' after @end titlepage. - -\def\headings #1 {\csname HEADINGS#1\endcsname} - -\def\HEADINGSoff{% -\global\evenheadline={\hfil} \global\evenfootline={\hfil} -\global\oddheadline={\hfil} \global\oddfootline={\hfil}} -\HEADINGSoff -% When we turn headings on, set the page number to 1. -% For double-sided printing, put current file name in lower left corner, -% chapter name on inside top of right hand pages, document -% title on inside top of left hand pages, and page numbers on outside top -% edge of all pages. -\def\HEADINGSdouble{% -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chapoddpage -} -\let\contentsalignmacro = \chappager - -% For single-sided printing, chapter title goes across top left of page, -% page number on top right. -\def\HEADINGSsingle{% -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapter\hfil\folio}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chappager -} -\def\HEADINGSon{\HEADINGSdouble} - -\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} -\let\HEADINGSdoubleafter=\HEADINGSafter -\def\HEADINGSdoublex{% -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chapoddpage -} - -\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} -\def\HEADINGSsinglex{% -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapter\hfil\folio}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -\global\let\contentsalignmacro = \chappager -} - -% Subroutines used in generating headings -% This produces Day Month Year style of output. -% Only define if not already defined, in case a txi-??.tex file has set -% up a different format (e.g., txi-cs.tex does this). -\ifx\today\undefined -\def\today{% - \number\day\space - \ifcase\month - \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr - \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug - \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec - \fi - \space\number\year} -\fi - -% @settitle line... specifies the title of the document, for headings. -% It generates no output of its own. -\def\thistitle{\putwordNoTitle} -\def\settitle{\parsearg{\gdef\thistitle}} - - -\message{tables,} -% Tables -- @table, @ftable, @vtable, @item(x). - -% default indentation of table text -\newdimen\tableindent \tableindent=.8in -% default indentation of @itemize and @enumerate text -\newdimen\itemindent \itemindent=.3in -% margin between end of table item and start of table text. -\newdimen\itemmargin \itemmargin=.1in - -% used internally for \itemindent minus \itemmargin -\newdimen\itemmax - -% Note @table, @ftable, and @vtable define @item, @itemx, etc., with -% these defs. -% They also define \itemindex -% to index the item name in whatever manner is desired (perhaps none). - -\newif\ifitemxneedsnegativevskip - -\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi} - -\def\internalBitem{\smallbreak \parsearg\itemzzz} -\def\internalBitemx{\itemxpar \parsearg\itemzzz} - -\def\itemzzz #1{\begingroup % - \advance\hsize by -\rightskip - \advance\hsize by -\tableindent - \setbox0=\hbox{\itemindicate{#1}}% - \itemindex{#1}% - \nobreak % This prevents a break before @itemx. - % - % If the item text does not fit in the space we have, put it on a line - % by itself, and do not allow a page break either before or after that - % line. We do not start a paragraph here because then if the next - % command is, e.g., @kindex, the whatsit would get put into the - % horizontal list on a line by itself, resulting in extra blank space. - \ifdim \wd0>\itemmax - % - % Make this a paragraph so we get the \parskip glue and wrapping, - % but leave it ragged-right. - \begingroup - \advance\leftskip by-\tableindent - \advance\hsize by\tableindent - \advance\rightskip by0pt plus1fil - \leavevmode\unhbox0\par - \endgroup - % - % We're going to be starting a paragraph, but we don't want the - % \parskip glue -- logically it's part of the @item we just started. - \nobreak \vskip-\parskip - % - % Stop a page break at the \parskip glue coming up. However, if - % what follows is an environment such as @example, there will be no - % \parskip glue; then the negative vskip we just inserted would - % cause the example and the item to crash together. So we use this - % bizarre value of 10001 as a signal to \aboveenvbreak to insert - % \parskip glue after all. Section titles are handled this way also. - % - \penalty 10001 - \endgroup - \itemxneedsnegativevskipfalse - \else - % The item text fits into the space. Start a paragraph, so that the - % following text (if any) will end up on the same line. - \noindent - % Do this with kerns and \unhbox so that if there is a footnote in - % the item text, it can migrate to the main vertical list and - % eventually be printed. - \nobreak\kern-\tableindent - \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0 - \unhbox0 - \nobreak\kern\dimen0 - \endgroup - \itemxneedsnegativevskiptrue - \fi -} - -\def\item{\errmessage{@item while not in a list environment}} -\def\itemx{\errmessage{@itemx while not in a list environment}} - -% @table, @ftable, @vtable. -\envdef\table{% - \let\itemindex\gobble - \tablecheck{table}% -} -\envdef\ftable{% - \def\itemindex ##1{\doind {fn}{\code{##1}}}% - \tablecheck{ftable}% -} -\envdef\vtable{% - \def\itemindex ##1{\doind {vr}{\code{##1}}}% - \tablecheck{vtable}% -} -\def\tablecheck#1{% - \ifnum \the\catcode`\^^M=\active - \endgroup - \errmessage{This command won't work in this context; perhaps the problem is - that we are \inenvironment\thisenv}% - \def\next{\doignore{#1}}% - \else - \let\next\tablex - \fi - \next -} -\def\tablex#1{% - \def\itemindicate{#1}% - \parsearg\tabley -} -\def\tabley#1{% - {% - \makevalueexpandable - \edef\temp{\noexpand\tablez #1\space\space\space}% - \expandafter - }\temp \endtablez -} -\def\tablez #1 #2 #3 #4\endtablez{% - \aboveenvbreak - \ifnum 0#1>0 \advance \leftskip by #1\mil \fi - \ifnum 0#2>0 \tableindent=#2\mil \fi - \ifnum 0#3>0 \advance \rightskip by #3\mil \fi - \itemmax=\tableindent - \advance \itemmax by -\itemmargin - \advance \leftskip by \tableindent - \exdentamount=\tableindent - \parindent = 0pt - \parskip = \smallskipamount - \ifdim \parskip=0pt \parskip=2pt \fi - \let\item = \internalBitem - \let\itemx = \internalBitemx -} -\def\Etable{\endgraf\afterenvbreak} -\let\Eftable\Etable -\let\Evtable\Etable -\let\Eitemize\Etable -\let\Eenumerate\Etable - -% This is the counter used by @enumerate, which is really @itemize - -\newcount \itemno - -\envdef\itemize{\parsearg\doitemize} - -\def\doitemize#1{% - \aboveenvbreak - \itemmax=\itemindent - \advance\itemmax by -\itemmargin - \advance\leftskip by \itemindent - \exdentamount=\itemindent - \parindent=0pt - \parskip=\smallskipamount - \ifdim\parskip=0pt \parskip=2pt \fi - \def\itemcontents{#1}% - % @itemize with no arg is equivalent to @itemize @bullet. - \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi - \let\item=\itemizeitem -} - -% Definition of @item while inside @itemize and @enumerate. -% -\def\itemizeitem{% - \advance\itemno by 1 % for enumerations - {\let\par=\endgraf \smallbreak}% reasonable place to break - {% - % If the document has an @itemize directly after a section title, a - % \nobreak will be last on the list, and \sectionheading will have - % done a \vskip-\parskip. In that case, we don't want to zero - % parskip, or the item text will crash with the heading. On the - % other hand, when there is normal text preceding the item (as there - % usually is), we do want to zero parskip, or there would be too much - % space. In that case, we won't have a \nobreak before. At least - % that's the theory. - \ifnum\lastpenalty<10000 \parskip=0in \fi - \noindent - \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% - \vadjust{\penalty 1200}}% not good to break after first line of item. - \flushcr -} - -% \splitoff TOKENS\endmark defines \first to be the first token in -% TOKENS, and \rest to be the remainder. -% -\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% - -% Allow an optional argument of an uppercase letter, lowercase letter, -% or number, to specify the first label in the enumerated list. No -% argument is the same as `1'. -% -\envparseargdef\enumerate{\enumeratey #1 \endenumeratey} -\def\enumeratey #1 #2\endenumeratey{% - % If we were given no argument, pretend we were given `1'. - \def\thearg{#1}% - \ifx\thearg\empty \def\thearg{1}\fi - % - % Detect if the argument is a single token. If so, it might be a - % letter. Otherwise, the only valid thing it can be is a number. - % (We will always have one token, because of the test we just made. - % This is a good thing, since \splitoff doesn't work given nothing at - % all -- the first parameter is undelimited.) - \expandafter\splitoff\thearg\endmark - \ifx\rest\empty - % Only one token in the argument. It could still be anything. - % A ``lowercase letter'' is one whose \lccode is nonzero. - % An ``uppercase letter'' is one whose \lccode is both nonzero, and - % not equal to itself. - % Otherwise, we assume it's a number. - % - % We need the \relax at the end of the \ifnum lines to stop TeX from - % continuing to look for a . - % - \ifnum\lccode\expandafter`\thearg=0\relax - \numericenumerate % a number (we hope) - \else - % It's a letter. - \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax - \lowercaseenumerate % lowercase letter - \else - \uppercaseenumerate % uppercase letter - \fi - \fi - \else - % Multiple tokens in the argument. We hope it's a number. - \numericenumerate - \fi -} - -% An @enumerate whose labels are integers. The starting integer is -% given in \thearg. -% -\def\numericenumerate{% - \itemno = \thearg - \startenumeration{\the\itemno}% -} - -% The starting (lowercase) letter is in \thearg. -\def\lowercaseenumerate{% - \itemno = \expandafter`\thearg - \startenumeration{% - % Be sure we're not beyond the end of the alphabet. - \ifnum\itemno=0 - \errmessage{No more lowercase letters in @enumerate; get a bigger - alphabet}% - \fi - \char\lccode\itemno - }% -} - -% The starting (uppercase) letter is in \thearg. -\def\uppercaseenumerate{% - \itemno = \expandafter`\thearg - \startenumeration{% - % Be sure we're not beyond the end of the alphabet. - \ifnum\itemno=0 - \errmessage{No more uppercase letters in @enumerate; get a bigger - alphabet} - \fi - \char\uccode\itemno - }% -} - -% Call \doitemize, adding a period to the first argument and supplying the -% common last two arguments. Also subtract one from the initial value in -% \itemno, since @item increments \itemno. -% -\def\startenumeration#1{% - \advance\itemno by -1 - \doitemize{#1.}\flushcr -} - -% @alphaenumerate and @capsenumerate are abbreviations for giving an arg -% to @enumerate. -% -\def\alphaenumerate{\enumerate{a}} -\def\capsenumerate{\enumerate{A}} -\def\Ealphaenumerate{\Eenumerate} -\def\Ecapsenumerate{\Eenumerate} - - -% @multitable macros -% Amy Hendrickson, 8/18/94, 3/6/96 -% -% @multitable ... @end multitable will make as many columns as desired. -% Contents of each column will wrap at width given in preamble. Width -% can be specified either with sample text given in a template line, -% or in percent of \hsize, the current width of text on page. - -% Table can continue over pages but will only break between lines. - -% To make preamble: -% -% Either define widths of columns in terms of percent of \hsize: -% @multitable @columnfractions .25 .3 .45 -% @item ... -% -% Numbers following @columnfractions are the percent of the total -% current hsize to be used for each column. You may use as many -% columns as desired. - - -% Or use a template: -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item ... -% using the widest term desired in each column. - -% Each new table line starts with @item, each subsequent new column -% starts with @tab. Empty columns may be produced by supplying @tab's -% with nothing between them for as many times as empty columns are needed, -% ie, @tab@tab@tab will produce two empty columns. - -% @item, @tab do not need to be on their own lines, but it will not hurt -% if they are. - -% Sample multitable: - -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff -% @tab Many paragraphs of text may be used in any column. -% -% They will wrap at the width determined by the template. -% @item@tab@tab This will be in third column. -% @end multitable - -% Default dimensions may be reset by user. -% @multitableparskip is vertical space between paragraphs in table. -% @multitableparindent is paragraph indent in table. -% @multitablecolmargin is horizontal space to be left between columns. -% @multitablelinespace is space to leave between table items, baseline -% to baseline. -% 0pt means it depends on current normal line spacing. -% -\newskip\multitableparskip -\newskip\multitableparindent -\newdimen\multitablecolspace -\newskip\multitablelinespace -\multitableparskip=0pt -\multitableparindent=6pt -\multitablecolspace=12pt -\multitablelinespace=0pt - -% Macros used to set up halign preamble: -% -\let\endsetuptable\relax -\def\xendsetuptable{\endsetuptable} -\let\columnfractions\relax -\def\xcolumnfractions{\columnfractions} -\newif\ifsetpercent - -% #1 is the @columnfraction, usually a decimal number like .5, but might -% be just 1. We just use it, whatever it is. -% -\def\pickupwholefraction#1 {% - \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}% - \setuptable -} - -\newcount\colcount -\def\setuptable#1{% - \def\firstarg{#1}% - \ifx\firstarg\xendsetuptable - \let\go = \relax - \else - \ifx\firstarg\xcolumnfractions - \global\setpercenttrue - \else - \ifsetpercent - \let\go\pickupwholefraction - \else - \global\advance\colcount by 1 - \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a - % separator; typically that is always in the input, anyway. - \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% - \fi - \fi - \ifx\go\pickupwholefraction - % Put the argument back for the \pickupwholefraction call, so - % we'll always have a period there to be parsed. - \def\go{\pickupwholefraction#1}% - \else - \let\go = \setuptable - \fi% - \fi - \go -} - -% multitable-only commands. -% -% @headitem starts a heading row, which we typeset in bold. -% Assignments have to be global since we are inside the implicit group -% of an alignment entry. Note that \everycr resets \everytab. -\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% -% -% A \tab used to include \hskip1sp. But then the space in a template -% line is not enough. That is bad. So let's go back to just `&' until -% we encounter the problem it was intended to solve again. -% --karl, nathan@acm.org, 20apr99. -\def\tab{\checkenv\multitable &\the\everytab}% - -% @multitable ... @end multitable definitions: -% -\newtoks\everytab % insert after every tab. -% -\envdef\multitable{% - \vskip\parskip - \startsavinginserts - % - % @item within a multitable starts a normal row. - % We use \def instead of \let so that if one of the multitable entries - % contains an @itemize, we don't choke on the \item (seen as \crcr aka - % \endtemplate) expanding \doitemize. - \def\item{\crcr}% - % - \tolerance=9500 - \hbadness=9500 - \setmultitablespacing - \parskip=\multitableparskip - \parindent=\multitableparindent - \overfullrule=0pt - \global\colcount=0 - % - \everycr = {% - \noalign{% - \global\everytab={}% - \global\colcount=0 % Reset the column counter. - % Check for saved footnotes, etc. - \checkinserts - % Keeps underfull box messages off when table breaks over pages. - %\filbreak - % Maybe so, but it also creates really weird page breaks when the - % table breaks over pages. Wouldn't \vfil be better? Wait until the - % problem manifests itself, so it can be fixed for real --karl. - }% - }% - % - \parsearg\domultitable -} -\def\domultitable#1{% - % To parse everything between @multitable and @item: - \setuptable#1 \endsetuptable - % - % This preamble sets up a generic column definition, which will - % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and - % continue for many paragraphs if desired. - \halign\bgroup &% - \global\advance\colcount by 1 - \multistrut - \vtop{% - % Use the current \colcount to find the correct column width: - \hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip - \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace - \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively - % marking characters. - \noindent\ignorespaces##\unskip\multistrut - }\cr -} -\def\Emultitable{% - \crcr - \egroup % end the \halign - \global\setpercentfalse -} - -\def\setmultitablespacing{% - \def\multistrut{\strut}% just use the standard line spacing - % - % Compute \multitablelinespace (if not defined by user) for use in - % \multitableparskip calculation. We used define \multistrut based on - % this, but (ironically) that caused the spacing to be off. - % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100. -\ifdim\multitablelinespace=0pt -\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip -\global\advance\multitablelinespace by-\ht0 -\fi -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. -\ifdim\multitableparskip>\multitablelinespace -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi% -\ifdim\multitableparskip=0pt -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi} - - -\message{conditionals,} - -% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext, -% @ifnotxml always succeed. They currently do nothing; we don't -% attempt to check whether the conditionals are properly nested. But we -% have to remember that they are conditionals, so that @end doesn't -% attempt to close an environment group. -% -\def\makecond#1{% - \expandafter\let\csname #1\endcsname = \relax - \expandafter\let\csname iscond.#1\endcsname = 1 -} -\makecond{iftex} -\makecond{ifnotdocbook} -\makecond{ifnothtml} -\makecond{ifnotinfo} -\makecond{ifnotplaintext} -\makecond{ifnotxml} - -% Ignore @ignore, @ifhtml, @ifinfo, and the like. -% -\def\direntry{\doignore{direntry}} -\def\documentdescription{\doignore{documentdescription}} -\def\docbook{\doignore{docbook}} -\def\html{\doignore{html}} -\def\ifdocbook{\doignore{ifdocbook}} -\def\ifhtml{\doignore{ifhtml}} -\def\ifinfo{\doignore{ifinfo}} -\def\ifnottex{\doignore{ifnottex}} -\def\ifplaintext{\doignore{ifplaintext}} -\def\ifxml{\doignore{ifxml}} -\def\ignore{\doignore{ignore}} -\def\menu{\doignore{menu}} -\def\xml{\doignore{xml}} - -% Ignore text until a line `@end #1', keeping track of nested conditionals. -% -% A count to remember the depth of nesting. -\newcount\doignorecount - -\def\doignore#1{\begingroup - % Scan in ``verbatim'' mode: - \catcode`\@ = \other - \catcode`\{ = \other - \catcode`\} = \other - % - % Make sure that spaces turn into tokens that match what \doignoretext wants. - \spaceisspace - % - % Count number of #1's that we've seen. - \doignorecount = 0 - % - % Swallow text until we reach the matching `@end #1'. - \dodoignore{#1}% -} - -{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source. - \obeylines % - % - \gdef\dodoignore#1{% - % #1 contains the command name as a string, e.g., `ifinfo'. - % - % Define a command to find the next `@end #1', which must be on a line - % by itself. - \long\def\doignoretext##1^^M@end #1{\doignoretextyyy##1^^M@#1\_STOP_}% - % And this command to find another #1 command, at the beginning of a - % line. (Otherwise, we would consider a line `@c @ifset', for - % example, to count as an @ifset for nesting.) - \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}% - % - % And now expand that command. - \obeylines % - \doignoretext ^^M% - }% -} - -\def\doignoreyyy#1{% - \def\temp{#1}% - \ifx\temp\empty % Nothing found. - \let\next\doignoretextzzz - \else % Found a nested condition, ... - \advance\doignorecount by 1 - \let\next\doignoretextyyy % ..., look for another. - % If we're here, #1 ends with ^^M\ifinfo (for example). - \fi - \next #1% the token \_STOP_ is present just after this macro. -} - -% We have to swallow the remaining "\_STOP_". -% -\def\doignoretextzzz#1{% - \ifnum\doignorecount = 0 % We have just found the outermost @end. - \let\next\enddoignore - \else % Still inside a nested condition. - \advance\doignorecount by -1 - \let\next\doignoretext % Look for the next @end. - \fi - \next -} - -% Finish off ignored text. -\def\enddoignore{\endgroup\ignorespaces} - - -% @set VAR sets the variable VAR to an empty value. -% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. -% -% Since we want to separate VAR from REST-OF-LINE (which might be -% empty), we can't just use \parsearg; we have to insert a space of our -% own to delimit the rest of the line, and then take it out again if we -% didn't need it. -% We rely on the fact that \parsearg sets \catcode`\ =10. -% -\parseargdef\set{\setyyy#1 \endsetyyy} -\def\setyyy#1 #2\endsetyyy{% - {% - \makevalueexpandable - \def\temp{#2}% - \edef\next{\gdef\makecsname{SET#1}}% - \ifx\temp\empty - \next{}% - \else - \setzzz#2\endsetzzz - \fi - }% -} -% Remove the trailing space \setxxx inserted. -\def\setzzz#1 \endsetzzz{\next{#1}} - -% @clear VAR clears (i.e., unsets) the variable VAR. -% -\parseargdef\clear{% - {% - \makevalueexpandable - \global\expandafter\let\csname SET#1\endcsname=\relax - }% -} - -% @value{foo} gets the text saved in variable foo. -\def\value{\begingroup\makevalueexpandable\valuexxx} -\def\valuexxx#1{\expandablevalue{#1}\endgroup} -{ - \catcode`\- = \active \catcode`\_ = \active - % - \gdef\makevalueexpandable{% - \let\value = \expandablevalue - % We don't want these characters active, ... - \catcode`\-=\other \catcode`\_=\other - % ..., but we might end up with active ones in the argument if - % we're called from @code, as @code{@value{foo-bar_}}, though. - % So \let them to their normal equivalents. - \let-\realdash \let_\normalunderscore - } -} - -% We have this subroutine so that we can handle at least some @value's -% properly in indexes (we call \makevalueexpandable in \indexdummies). -% The command has to be fully expandable (if the variable is set), since -% the result winds up in the index file. This means that if the -% variable's value contains other Texinfo commands, it's almost certain -% it will fail (although perhaps we could fix that with sufficient work -% to do a one-level expansion on the result, instead of complete). -% -\def\expandablevalue#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']}% - \message{Variable `#1', used in @value, is not set.}% - \else - \csname SET#1\endcsname - \fi -} - -% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined -% with @set. -% -% To get special treatment of `@end ifset,' call \makeond and the redefine. -% -\makecond{ifset} -\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}} -\def\doifset#1#2{% - {% - \makevalueexpandable - \let\next=\empty - \expandafter\ifx\csname SET#2\endcsname\relax - #1% If not set, redefine \next. - \fi - \expandafter - }\next -} -\def\ifsetfail{\doignore{ifset}} - -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been -% defined with @set, or has been undefined with @clear. -% -% The `\else' inside the `\doifset' parameter is a trick to reuse the -% above code: if the variable is not set, do nothing, if it is set, -% then redefine \next to \ifclearfail. -% -\makecond{ifclear} -\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}} -\def\ifclearfail{\doignore{ifclear}} - -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory=\comment - -% @defininfoenclose. -\let\definfoenclose=\comment - - -\message{indexing,} -% Index generation facilities - -% Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within macros and \if's. -\edef\newwrite{\makecsname{ptexnewwrite}} - -% \newindex {foo} defines an index named foo. -% It automatically defines \fooindex such that -% \fooindex ...rest of line... puts an entry in the index foo. -% It also defines \fooindfile to be the number of the output channel for -% the file that accumulates this index. The file's extension is foo. -% The name of an index should be no more than 2 characters long -% for the sake of vms. -% -\def\newindex#1{% - \iflinks - \expandafter\newwrite \csname#1indfile\endcsname - \openout \csname#1indfile\endcsname \jobname.#1 % Open the file - \fi - \expandafter\xdef\csname#1index\endcsname{% % Define @#1index - \noexpand\doindex{#1}} -} - -% @defindex foo == \newindex{foo} -% -\def\defindex{\parsearg\newindex} - -% Define @defcodeindex, like @defindex except put all entries in @code. -% -\def\defcodeindex{\parsearg\newcodeindex} -% -\def\newcodeindex#1{% - \iflinks - \expandafter\newwrite \csname#1indfile\endcsname - \openout \csname#1indfile\endcsname \jobname.#1 - \fi - \expandafter\xdef\csname#1index\endcsname{% - \noexpand\docodeindex{#1}}% -} - - -% @synindex foo bar makes index foo feed into index bar. -% Do this instead of @defindex foo if you don't want it as a separate index. -% -% @syncodeindex foo bar similar, but put all entries made for index foo -% inside @code. -% -\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}} -\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}} - -% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo), -% #3 the target index (bar). -\def\dosynindex#1#2#3{% - % Only do \closeout if we haven't already done it, else we'll end up - % closing the target index. - \expandafter \ifx\csname donesynindex#2\endcsname \undefined - % The \closeout helps reduce unnecessary open files; the limit on the - % Acorn RISC OS is a mere 16 files. - \expandafter\closeout\csname#2indfile\endcsname - \expandafter\let\csname\donesynindex#2\endcsname = 1 - \fi - % redefine \fooindfile: - \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname - \expandafter\let\csname#2indfile\endcsname=\temp - % redefine \fooindex: - \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% -} - -% Define \doindex, the driver for all \fooindex macros. -% Argument #1 is generated by the calling \fooindex macro, -% and it is "foo", the name of the index. - -% \doindex just uses \parsearg; it calls \doind for the actual work. -% This is because \doind is more useful to call from other macros. - -% There is also \dosubind {index}{topic}{subtopic} -% which makes an entry in a two-level index such as the operation index. - -\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} -\def\singleindexer #1{\doind{\indexname}{#1}} - -% like the previous two, but they put @code around the argument. -\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} -\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} - -% Take care of Texinfo commands that can appear in an index entry. -% Since there are some commands we want to expand, and others we don't, -% we have to laboriously prevent expansion for those that we don't. -% -\def\indexdummies{% - \def\@{@}% change to @@ when we switch to @ as escape char in index files. - \def\ {\realbackslash\space }% - % Need these in case \tex is in effect and \{ is a \delimiter again. - % But can't use \lbracecmd and \rbracecmd because texindex assumes - % braces and backslashes are used only as delimiters. - \let\{ = \mylbrace - \let\} = \myrbrace - % - % \definedummyword defines \#1 as \realbackslash #1\space, thus - % effectively preventing its expansion. This is used only for control - % words, not control letters, because the \space would be incorrect - % for control characters, but is needed to separate the control word - % from whatever follows. - % - % For control letters, we have \definedummyletter, which omits the - % space. - % - % These can be used both for control words that take an argument and - % those that do not. If it is followed by {arg} in the input, then - % that will dutifully get written to the index (or wherever). - % - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{\realbackslash ##1}% - }% - \let\definedummyaccent\definedummyletter - % - % Do the redefinitions. - \commondummies -} - -% For the aux file, @ is the escape character. So we want to redefine -% everything using @ instead of \realbackslash. When everything uses -% @, this will be simpler. -% -\def\atdummies{% - \def\@{@@}% - \def\ {@ }% - \let\{ = \lbraceatcmd - \let\} = \rbraceatcmd - % - % (See comments in \indexdummies.) - \def\definedummyword##1{% - \expandafter\def\csname ##1\endcsname{@##1\space}% - }% - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{@##1}% - }% - \let\definedummyaccent\definedummyletter - % - % Do the redefinitions. - \commondummies -} - -% Called from \indexdummies and \atdummies. \definedummyword and -% \definedummyletter must be defined first. -% -\def\commondummies{% - % - \normalturnoffactive - % - \commondummiesnofonts - % - \definedummyletter{_}% - % - % Non-English letters. - \definedummyword{AA}% - \definedummyword{AE}% - \definedummyword{L}% - \definedummyword{OE}% - \definedummyword{O}% - \definedummyword{aa}% - \definedummyword{ae}% - \definedummyword{l}% - \definedummyword{oe}% - \definedummyword{o}% - \definedummyword{ss}% - \definedummyword{exclamdown}% - \definedummyword{questiondown}% - \definedummyword{ordf}% - \definedummyword{ordm}% - % - % Although these internal commands shouldn't show up, sometimes they do. - \definedummyword{bf}% - \definedummyword{gtr}% - \definedummyword{hat}% - \definedummyword{less}% - \definedummyword{sf}% - \definedummyword{sl}% - \definedummyword{tclose}% - \definedummyword{tt}% - % - \definedummyword{LaTeX}% - \definedummyword{TeX}% - % - % Assorted special characters. - \definedummyword{bullet}% - \definedummyword{comma}% - \definedummyword{copyright}% - \definedummyword{registeredsymbol}% - \definedummyword{dots}% - \definedummyword{enddots}% - \definedummyword{equiv}% - \definedummyword{error}% - \definedummyword{euro}% - \definedummyword{expansion}% - \definedummyword{minus}% - \definedummyword{pounds}% - \definedummyword{point}% - \definedummyword{print}% - \definedummyword{result}% - % - % Handle some cases of @value -- where it does not contain any - % (non-fully-expandable) commands. - \makevalueexpandable - % - % Normal spaces, not active ones. - \unsepspaces - % - % No macro expansion. - \turnoffmacros -} - -% \commondummiesnofonts: common to \commondummies and \indexnofonts. -% -% Better have this without active chars. -{ - \catcode`\~=\other - \gdef\commondummiesnofonts{% - % Control letters and accents. - \definedummyletter{!}% - \definedummyaccent{"}% - \definedummyaccent{'}% - \definedummyletter{*}% - \definedummyaccent{,}% - \definedummyletter{.}% - \definedummyletter{/}% - \definedummyletter{:}% - \definedummyaccent{=}% - \definedummyletter{?}% - \definedummyaccent{^}% - \definedummyaccent{`}% - \definedummyaccent{~}% - \definedummyword{u}% - \definedummyword{v}% - \definedummyword{H}% - \definedummyword{dotaccent}% - \definedummyword{ringaccent}% - \definedummyword{tieaccent}% - \definedummyword{ubaraccent}% - \definedummyword{udotaccent}% - \definedummyword{dotless}% - % - % Texinfo font commands. - \definedummyword{b}% - \definedummyword{i}% - \definedummyword{r}% - \definedummyword{sc}% - \definedummyword{t}% - % - % Commands that take arguments. - \definedummyword{acronym}% - \definedummyword{cite}% - \definedummyword{code}% - \definedummyword{command}% - \definedummyword{dfn}% - \definedummyword{emph}% - \definedummyword{env}% - \definedummyword{file}% - \definedummyword{kbd}% - \definedummyword{key}% - \definedummyword{math}% - \definedummyword{option}% - \definedummyword{samp}% - \definedummyword{strong}% - \definedummyword{tie}% - \definedummyword{uref}% - \definedummyword{url}% - \definedummyword{var}% - \definedummyword{verb}% - \definedummyword{w}% - } -} - -% \indexnofonts is used when outputting the strings to sort the index -% by, and when constructing control sequence names. It eliminates all -% control sequences and just writes whatever the best ASCII sort string -% would be for a given command (usually its argument). -% -\def\indexnofonts{% - % Accent commands should become @asis. - \def\definedummyaccent##1{% - \expandafter\let\csname ##1\endcsname\asis - }% - % We can just ignore other control letters. - \def\definedummyletter##1{% - \expandafter\def\csname ##1\endcsname{}% - }% - % Hopefully, all control words can become @asis. - \let\definedummyword\definedummyaccent - % - \commondummiesnofonts - % - % Don't no-op \tt, since it isn't a user-level command - % and is used in the definitions of the active chars like <, >, |, etc. - % Likewise with the other plain tex font commands. - %\let\tt=\asis - % - \def\ { }% - \def\@{@}% - % how to handle braces? - \def\_{\normalunderscore}% - % - % Non-English letters. - \def\AA{AA}% - \def\AE{AE}% - \def\L{L}% - \def\OE{OE}% - \def\O{O}% - \def\aa{aa}% - \def\ae{ae}% - \def\l{l}% - \def\oe{oe}% - \def\o{o}% - \def\ss{ss}% - \def\exclamdown{!}% - \def\questiondown{?}% - \def\ordf{a}% - \def\ordm{o}% - % - \def\LaTeX{LaTeX}% - \def\TeX{TeX}% - % - % Assorted special characters. - % (The following {} will end up in the sort string, but that's ok.) - \def\bullet{bullet}% - \def\comma{,}% - \def\copyright{copyright}% - \def\registeredsymbol{R}% - \def\dots{...}% - \def\enddots{...}% - \def\equiv{==}% - \def\error{error}% - \def\euro{euro}% - \def\expansion{==>}% - \def\minus{-}% - \def\pounds{pounds}% - \def\point{.}% - \def\print{-|}% - \def\result{=>}% - % - % Don't write macro names. - \emptyusermacros -} - -\let\indexbackslash=0 %overridden during \printindex. -\let\SETmarginindex=\relax % put index entries in margin (undocumented)? - -% Most index entries go through here, but \dosubind is the general case. -% #1 is the index name, #2 is the entry text. -\def\doind#1#2{\dosubind{#1}{#2}{}} - -% Workhorse for all \fooindexes. -% #1 is name of index, #2 is stuff to put there, #3 is subentry -- -% empty if called from \doind, as we usually are (the main exception -% is with most defuns, which call us directly). -% -\def\dosubind#1#2#3{% - \iflinks - {% - % Store the main index entry text (including the third arg). - \toks0 = {#2}% - % If third arg is present, precede it with a space. - \def\thirdarg{#3}% - \ifx\thirdarg\empty \else - \toks0 = \expandafter{\the\toks0 \space #3}% - \fi - % - \edef\writeto{\csname#1indfile\endcsname}% - % - \ifvmode - \dosubindsanitize - \else - \dosubindwrite - \fi - }% - \fi -} - -% Write the entry in \toks0 to the index file: -% -\def\dosubindwrite{% - % Put the index entry in the margin if desired. - \ifx\SETmarginindex\relax\else - \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}% - \fi - % - % Remember, we are within a group. - \indexdummies % Must do this here, since \bf, etc expand at this stage - \escapechar=`\\ - \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now - % so it will be output as is; and it will print as backslash. - % - % Process the index entry with all font commands turned off, to - % get the string to sort by. - {\indexnofonts - \edef\temp{\the\toks0}% need full expansion - \xdef\indexsorttmp{\temp}% - }% - % - % Set up the complete index entry, with both the sort key and - % the original text, including any font commands. We write - % three arguments to \entry to the .?? file (four in the - % subentry case), texindex reduces to two when writing the .??s - % sorted result. - \edef\temp{% - \write\writeto{% - \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% - }% - \temp -} - -% Take care of unwanted page breaks: -% -% If a skip is the last thing on the list now, preserve it -% by backing up by \lastskip, doing the \write, then inserting -% the skip again. Otherwise, the whatsit generated by the -% \write will make \lastskip zero. The result is that sequences -% like this: -% @end defun -% @tindex whatever -% @defun ... -% will have extra space inserted, because the \medbreak in the -% start of the @defun won't see the skip inserted by the @end of -% the previous defun. -% -% But don't do any of this if we're not in vertical mode. We -% don't want to do a \vskip and prematurely end a paragraph. -% -% Avoid page breaks due to these extra skips, too. -% -% But wait, there is a catch there: -% We'll have to check whether \lastskip is zero skip. \ifdim is not -% sufficient for this purpose, as it ignores stretch and shrink parts -% of the skip. The only way seems to be to check the textual -% representation of the skip. -% -% The following is almost like \def\zeroskipmacro{0.0pt} except that -% the ``p'' and ``t'' characters have catcode \other, not 11 (letter). -% -\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname} -% -% ..., ready, GO: -% -\def\dosubindsanitize{% - % \lastskip and \lastpenalty cannot both be nonzero simultaneously. - \skip0 = \lastskip - \edef\lastskipmacro{\the\lastskip}% - \count255 = \lastpenalty - % - % If \lastskip is nonzero, that means the last item was a - % skip. And since a skip is discardable, that means this - % -\skip0 glue we're inserting is preceded by a - % non-discardable item, therefore it is not a potential - % breakpoint, therefore no \nobreak needed. - \ifx\lastskipmacro\zeroskipmacro - \else - \vskip-\skip0 - \fi - % - \dosubindwrite - % - \ifx\lastskipmacro\zeroskipmacro - % If \lastskip was zero, perhaps the last item was a penalty, and - % perhaps it was >=10000, e.g., a \nobreak. In that case, we want - % to re-insert the same penalty (values >10000 are used for various - % signals); since we just inserted a non-discardable item, any - % following glue (such as a \parskip) would be a breakpoint. For example: - % - % @deffn deffn-whatever - % @vindex index-whatever - % Description. - % would allow a break between the index-whatever whatsit - % and the "Description." paragraph. - \ifnum\count255>9999 \penalty\count255 \fi - \else - % On the other hand, if we had a nonzero \lastskip, - % this make-up glue would be preceded by a non-discardable item - % (the whatsit from the \write), so we must insert a \nobreak. - \nobreak\vskip\skip0 - \fi -} - -% The index entry written in the file actually looks like -% \entry {sortstring}{page}{topic} -% or -% \entry {sortstring}{page}{topic}{subtopic} -% The texindex program reads in these files and writes files -% containing these kinds of lines: -% \initial {c} -% before the first topic whose initial is c -% \entry {topic}{pagelist} -% for a topic that is used without subtopics -% \primary {topic} -% for the beginning of a topic that is used with subtopics -% \secondary {subtopic}{pagelist} -% for each subtopic. - -% Define the user-accessible indexing commands -% @findex, @vindex, @kindex, @cindex. - -\def\findex {\fnindex} -\def\kindex {\kyindex} -\def\cindex {\cpindex} -\def\vindex {\vrindex} -\def\tindex {\tpindex} -\def\pindex {\pgindex} - -\def\cindexsub {\begingroup\obeylines\cindexsub} -{\obeylines % -\gdef\cindexsub "#1" #2^^M{\endgroup % -\dosubind{cp}{#2}{#1}}} - -% Define the macros used in formatting output of the sorted index material. - -% @printindex causes a particular index (the ??s file) to get printed. -% It does not print any chapter heading (usually an @unnumbered). -% -\parseargdef\printindex{\begingroup - \dobreak \chapheadingskip{10000}% - % - \smallfonts \rm - \tolerance = 9500 - \everypar = {}% don't want the \kern\-parindent from indentation suppression. - % - % See if the index file exists and is nonempty. - % Change catcode of @ here so that if the index file contains - % \initial {@} - % as its first line, TeX doesn't complain about mismatched braces - % (because it thinks @} is a control sequence). - \catcode`\@ = 11 - \openin 1 \jobname.#1s - \ifeof 1 - % \enddoublecolumns gets confused if there is no text in the index, - % and it loses the chapter title and the aux file entries for the - % index. The easiest way to prevent this problem is to make sure - % there is some text. - \putwordIndexNonexistent - \else - % - % If the index file exists but is empty, then \openin leaves \ifeof - % false. We have to make TeX try to read something from the file, so - % it can discover if there is anything in it. - \read 1 to \temp - \ifeof 1 - \putwordIndexIsEmpty - \else - % Index files are almost Texinfo source, but we use \ as the escape - % character. It would be better to use @, but that's too big a change - % to make right now. - \def\indexbackslash{\backslashcurfont}% - \catcode`\\ = 0 - \escapechar = `\\ - \begindoublecolumns - \input \jobname.#1s - \enddoublecolumns - \fi - \fi - \closein 1 -\endgroup} - -% These macros are used by the sorted index file itself. -% Change them to control the appearance of the index. - -\def\initial#1{{% - % Some minor font changes for the special characters. - \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt - % - % Remove any glue we may have, we'll be inserting our own. - \removelastskip - % - % We like breaks before the index initials, so insert a bonus. - \nobreak - \vskip 0pt plus 3\baselineskip - \penalty 0 - \vskip 0pt plus -3\baselineskip - % - % Typeset the initial. Making this add up to a whole number of - % baselineskips increases the chance of the dots lining up from column - % to column. It still won't often be perfect, because of the stretch - % we need before each entry, but it's better. - % - % No shrink because it confuses \balancecolumns. - \vskip 1.67\baselineskip plus .5\baselineskip - \leftline{\secbf #1}% - % Do our best not to break after the initial. - \nobreak - \vskip .33\baselineskip plus .1\baselineskip -}} - -% \entry typesets a paragraph consisting of the text (#1), dot leaders, and -% then page number (#2) flushed to the right margin. It is used for index -% and table of contents entries. The paragraph is indented by \leftskip. -% -% A straightforward implementation would start like this: -% \def\entry#1#2{... -% But this frozes the catcodes in the argument, and can cause problems to -% @code, which sets - active. This problem was fixed by a kludge--- -% ``-'' was active throughout whole index, but this isn't really right. -% -% The right solution is to prevent \entry from swallowing the whole text. -% --kasal, 21nov03 -\def\entry{% - \begingroup - % - % Start a new paragraph if necessary, so our assignments below can't - % affect previous text. - \par - % - % Do not fill out the last line with white space. - \parfillskip = 0in - % - % No extra space above this paragraph. - \parskip = 0in - % - % Do not prefer a separate line ending with a hyphen to fewer lines. - \finalhyphendemerits = 0 - % - % \hangindent is only relevant when the entry text and page number - % don't both fit on one line. In that case, bob suggests starting the - % dots pretty far over on the line. Unfortunately, a large - % indentation looks wrong when the entry text itself is broken across - % lines. So we use a small indentation and put up with long leaders. - % - % \hangafter is reset to 1 (which is the value we want) at the start - % of each paragraph, so we need not do anything with that. - \hangindent = 2em - % - % When the entry text needs to be broken, just fill out the first line - % with blank space. - \rightskip = 0pt plus1fil - % - % A bit of stretch before each entry for the benefit of balancing - % columns. - \vskip 0pt plus1pt - % - % Swallow the left brace of the text (first parameter): - \afterassignment\doentry - \let\temp = -} -\def\doentry{% - \bgroup % Instead of the swallowed brace. - \noindent - \aftergroup\finishentry - % And now comes the text of the entry. -} -\def\finishentry#1{% - % #1 is the page number. - % - % The following is kludged to not output a line of dots in the index if - % there are no page numbers. The next person who breaks this will be - % cursed by a Unix daemon. - \def\tempa{{\rm }}% - \def\tempb{#1}% - \edef\tempc{\tempa}% - \edef\tempd{\tempb}% - \ifx\tempc\tempd - \ % - \else - % - % If we must, put the page number on a line of its own, and fill out - % this line with blank space. (The \hfil is overwhelmed with the - % fill leaders glue in \indexdotfill if the page number does fit.) - \hfil\penalty50 - \null\nobreak\indexdotfill % Have leaders before the page number. - % - % The `\ ' here is removed by the implicit \unskip that TeX does as - % part of (the primitive) \par. Without it, a spurious underfull - % \hbox ensues. - \ifpdf - \pdfgettoks#1.% - \ \the\toksA - \else - \ #1% - \fi - \fi - \par - \endgroup -} - -% Like \dotfill except takes at least 1 em. -\def\indexdotfill{\cleaders - \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill} - -\def\primary #1{\line{#1\hfil}} - -\newskip\secondaryindent \secondaryindent=0.5cm -\def\secondary#1#2{{% - \parfillskip=0in - \parskip=0in - \hangindent=1in - \hangafter=1 - \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill - \ifpdf - \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph. - \else - #2 - \fi - \par -}} - -% Define two-column mode, which we use to typeset indexes. -% Adapted from the TeXbook, page 416, which is to say, -% the manmac.tex format used to print the TeXbook itself. -\catcode`\@=11 - -\newbox\partialpage -\newdimen\doublecolumnhsize - -\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns - % Grab any single-column material above us. - \output = {% - % - % Here is a possibility not foreseen in manmac: if we accumulate a - % whole lot of material, we might end up calling this \output - % routine twice in a row (see the doublecol-lose test, which is - % essentially a couple of indexes with @setchapternewpage off). In - % that case we just ship out what is in \partialpage with the normal - % output routine. Generally, \partialpage will be empty when this - % runs and this will be a no-op. See the indexspread.tex test case. - \ifvoid\partialpage \else - \onepageout{\pagecontents\partialpage}% - \fi - % - \global\setbox\partialpage = \vbox{% - % Unvbox the main output page. - \unvbox\PAGE - \kern-\topskip \kern\baselineskip - }% - }% - \eject % run that output routine to set \partialpage - % - % Use the double-column output routine for subsequent pages. - \output = {\doublecolumnout}% - % - % Change the page size parameters. We could do this once outside this - % routine, in each of @smallbook, @afourpaper, and the default 8.5x11 - % format, but then we repeat the same computation. Repeating a couple - % of assignments once per index is clearly meaningless for the - % execution time, so we may as well do it in one place. - % - % First we halve the line length, less a little for the gutter between - % the columns. We compute the gutter based on the line length, so it - % changes automatically with the paper format. The magic constant - % below is chosen so that the gutter has the same value (well, +-<1pt) - % as it did when we hard-coded it. - % - % We put the result in a separate register, \doublecolumhsize, so we - % can restore it in \pagesofar, after \hsize itself has (potentially) - % been clobbered. - % - \doublecolumnhsize = \hsize - \advance\doublecolumnhsize by -.04154\hsize - \divide\doublecolumnhsize by 2 - \hsize = \doublecolumnhsize - % - % Double the \vsize as well. (We don't need a separate register here, - % since nobody clobbers \vsize.) - \vsize = 2\vsize -} - -% The double-column output routine for all double-column pages except -% the last. -% -\def\doublecolumnout{% - \splittopskip=\topskip \splitmaxdepth=\maxdepth - % Get the available space for the double columns -- the normal - % (undoubled) page height minus any material left over from the - % previous page. - \dimen@ = \vsize - \divide\dimen@ by 2 - \advance\dimen@ by -\ht\partialpage - % - % box0 will be the left-hand column, box2 the right. - \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ - \onepageout\pagesofar - \unvbox255 - \penalty\outputpenalty -} -% -% Re-output the contents of the output page -- any previous material, -% followed by the two boxes we just split, in box0 and box2. -\def\pagesofar{% - \unvbox\partialpage - % - \hsize = \doublecolumnhsize - \wd0=\hsize \wd2=\hsize - \hbox to\pagewidth{\box0\hfil\box2}% -} -% -% All done with double columns. -\def\enddoublecolumns{% - \output = {% - % Split the last of the double-column material. Leave it on the - % current page, no automatic page break. - \balancecolumns - % - % If we end up splitting too much material for the current page, - % though, there will be another page break right after this \output - % invocation ends. Having called \balancecolumns once, we do not - % want to call it again. Therefore, reset \output to its normal - % definition right away. (We hope \balancecolumns will never be - % called on to balance too much material, but if it is, this makes - % the output somewhat more palatable.) - \global\output = {\onepageout{\pagecontents\PAGE}}% - }% - \eject - \endgroup % started in \begindoublecolumns - % - % \pagegoal was set to the doubled \vsize above, since we restarted - % the current page. We're now back to normal single-column - % typesetting, so reset \pagegoal to the normal \vsize (after the - % \endgroup where \vsize got restored). - \pagegoal = \vsize -} -% -% Called at the end of the double column material. -\def\balancecolumns{% - \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. - \dimen@ = \ht0 - \advance\dimen@ by \topskip - \advance\dimen@ by-\baselineskip - \divide\dimen@ by 2 % target to split to - %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% - \splittopskip = \topskip - % Loop until we get a decent breakpoint. - {% - \vbadness = 10000 - \loop - \global\setbox3 = \copy0 - \global\setbox1 = \vsplit3 to \dimen@ - \ifdim\ht3>\dimen@ - \global\advance\dimen@ by 1pt - \repeat - }% - %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% - \setbox0=\vbox to\dimen@{\unvbox1}% - \setbox2=\vbox to\dimen@{\unvbox3}% - % - \pagesofar -} -\catcode`\@ = \other - - -\message{sectioning,} -% Chapters, sections, etc. - -% \unnumberedno is an oxymoron, of course. But we count the unnumbered -% sections so that we can refer to them unambiguously in the pdf -% outlines by their "section number". We avoid collisions with chapter -% numbers by starting them at 10000. (If a document ever has 10000 -% chapters, we're in trouble anyway, I'm sure.) -\newcount\unnumberedno \unnumberedno = 10000 -\newcount\chapno -\newcount\secno \secno=0 -\newcount\subsecno \subsecno=0 -\newcount\subsubsecno \subsubsecno=0 - -% This counter is funny since it counts through charcodes of letters A, B, ... -\newcount\appendixno \appendixno = `\@ -% -% \def\appendixletter{\char\the\appendixno} -% We do the following ugly conditional instead of the above simple -% construct for the sake of pdftex, which needs the actual -% letter in the expansion, not just typeset. -% -\def\appendixletter{% - \ifnum\appendixno=`A A% - \else\ifnum\appendixno=`B B% - \else\ifnum\appendixno=`C C% - \else\ifnum\appendixno=`D D% - \else\ifnum\appendixno=`E E% - \else\ifnum\appendixno=`F F% - \else\ifnum\appendixno=`G G% - \else\ifnum\appendixno=`H H% - \else\ifnum\appendixno=`I I% - \else\ifnum\appendixno=`J J% - \else\ifnum\appendixno=`K K% - \else\ifnum\appendixno=`L L% - \else\ifnum\appendixno=`M M% - \else\ifnum\appendixno=`N N% - \else\ifnum\appendixno=`O O% - \else\ifnum\appendixno=`P P% - \else\ifnum\appendixno=`Q Q% - \else\ifnum\appendixno=`R R% - \else\ifnum\appendixno=`S S% - \else\ifnum\appendixno=`T T% - \else\ifnum\appendixno=`U U% - \else\ifnum\appendixno=`V V% - \else\ifnum\appendixno=`W W% - \else\ifnum\appendixno=`X X% - \else\ifnum\appendixno=`Y Y% - \else\ifnum\appendixno=`Z Z% - % The \the is necessary, despite appearances, because \appendixletter is - % expanded while writing the .toc file. \char\appendixno is not - % expandable, thus it is written literally, thus all appendixes come out - % with the same letter (or @) in the toc without it. - \else\char\the\appendixno - \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi - \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi} - -% Each @chapter defines this as the name of the chapter. -% page headings and footings can use it. @section does likewise. -% However, they are not reliable, because we don't use marks. -\def\thischapter{} -\def\thissection{} - -\newcount\absseclevel % used to calculate proper heading level -\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count - -% @raisesections: treat @section as chapter, @subsection as section, etc. -\def\raisesections{\global\advance\secbase by -1} -\let\up=\raisesections % original BFox name - -% @lowersections: treat @chapter as section, @section as subsection, etc. -\def\lowersections{\global\advance\secbase by 1} -\let\down=\lowersections % original BFox name - -% we only have subsub. -\chardef\maxseclevel = 3 -% -% A numbered section within an unnumbered changes to unnumbered too. -% To achive this, remember the "biggest" unnum. sec. we are currently in: -\chardef\unmlevel = \maxseclevel -% -% Trace whether the current chapter is an appendix or not: -% \chapheadtype is "N" or "A", unnumbered chapters are ignored. -\def\chapheadtype{N} - -% Choose a heading macro -% #1 is heading type -% #2 is heading level -% #3 is text for heading -\def\genhead#1#2#3{% - % Compute the abs. sec. level: - \absseclevel=#2 - \advance\absseclevel by \secbase - % Make sure \absseclevel doesn't fall outside the range: - \ifnum \absseclevel < 0 - \absseclevel = 0 - \else - \ifnum \absseclevel > 3 - \absseclevel = 3 - \fi - \fi - % The heading type: - \def\headtype{#1}% - \if \headtype U% - \ifnum \absseclevel < \unmlevel - \chardef\unmlevel = \absseclevel - \fi - \else - % Check for appendix sections: - \ifnum \absseclevel = 0 - \edef\chapheadtype{\headtype}% - \else - \if \headtype A\if \chapheadtype N% - \errmessage{@appendix... within a non-appendix chapter}% - \fi\fi - \fi - % Check for numbered within unnumbered: - \ifnum \absseclevel > \unmlevel - \def\headtype{U}% - \else - \chardef\unmlevel = 3 - \fi - \fi - % Now print the heading: - \if \headtype U% - \ifcase\absseclevel - \unnumberedzzz{#3}% - \or \unnumberedseczzz{#3}% - \or \unnumberedsubseczzz{#3}% - \or \unnumberedsubsubseczzz{#3}% - \fi - \else - \if \headtype A% - \ifcase\absseclevel - \appendixzzz{#3}% - \or \appendixsectionzzz{#3}% - \or \appendixsubseczzz{#3}% - \or \appendixsubsubseczzz{#3}% - \fi - \else - \ifcase\absseclevel - \chapterzzz{#3}% - \or \seczzz{#3}% - \or \numberedsubseczzz{#3}% - \or \numberedsubsubseczzz{#3}% - \fi - \fi - \fi - \suppressfirstparagraphindent -} - -% an interface: -\def\numhead{\genhead N} -\def\apphead{\genhead A} -\def\unnmhead{\genhead U} - -% @chapter, @appendix, @unnumbered. Increment top-level counter, reset -% all lower-level sectioning counters to zero. -% -% Also set \chaplevelprefix, which we prepend to @float sequence numbers -% (e.g., figures), q.v. By default (before any chapter), that is empty. -\let\chaplevelprefix = \empty -% -\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz -\def\chapterzzz#1{% - % section resetting is \global in case the chapter is in a group, such - % as an @include file. - \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 - \global\advance\chapno by 1 - % - % Used for \float. - \gdef\chaplevelprefix{\the\chapno.}% - \resetallfloatnos - % - \message{\putwordChapter\space \the\chapno}% - % - % Write the actual heading. - \chapmacro{#1}{Ynumbered}{\the\chapno}% - % - % So @section and the like are numbered underneath this chapter. - \global\let\section = \numberedsec - \global\let\subsection = \numberedsubsec - \global\let\subsubsection = \numberedsubsubsec -} - -\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz -\def\appendixzzz#1{% - \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 - \global\advance\appendixno by 1 - \gdef\chaplevelprefix{\appendixletter.}% - \resetallfloatnos - % - \def\appendixnum{\putwordAppendix\space \appendixletter}% - \message{\appendixnum}% - % - \chapmacro{#1}{Yappendix}{\appendixletter}% - % - \global\let\section = \appendixsec - \global\let\subsection = \appendixsubsec - \global\let\subsubsection = \appendixsubsubsec -} - -\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz -\def\unnumberedzzz#1{% - \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 - \global\advance\unnumberedno by 1 - % - % Since an unnumbered has no number, no prefix for figures. - \global\let\chaplevelprefix = \empty - \resetallfloatnos - % - % This used to be simply \message{#1}, but TeX fully expands the - % argument to \message. Therefore, if #1 contained @-commands, TeX - % expanded them. For example, in `@unnumbered The @cite{Book}', TeX - % expanded @cite (which turns out to cause errors because \cite is meant - % to be executed, not expanded). - % - % Anyway, we don't want the fully-expanded definition of @cite to appear - % as a result of the \message, we just want `@cite' itself. We use - % \the to achieve this: TeX expands \the only once, - % simply yielding the contents of . (We also do this for - % the toc entries.) - \toks0 = {#1}% - \message{(\the\toks0)}% - % - \chapmacro{#1}{Ynothing}{\the\unnumberedno}% - % - \global\let\section = \unnumberedsec - \global\let\subsection = \unnumberedsubsec - \global\let\subsubsection = \unnumberedsubsubsec -} - -% @centerchap is like @unnumbered, but the heading is centered. -\outer\parseargdef\centerchap{% - % Well, we could do the following in a group, but that would break - % an assumption that \chapmacro is called at the outermost level. - % Thus we are safer this way: --kasal, 24feb04 - \let\centerparametersmaybe = \centerparameters - \unnmhead0{#1}% - \let\centerparametersmaybe = \relax -} - -% @top is like @unnumbered. -\let\top\unnumbered - -% Sections. -\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz -\def\seczzz#1{% - \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 - \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% -} - -\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz -\def\appendixsectionzzz#1{% - \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 - \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% -} -\let\appendixsec\appendixsection - -\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz -\def\unnumberedseczzz#1{% - \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 - \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% -} - -% Subsections. -\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz -\def\numberedsubseczzz#1{% - \global\subsubsecno=0 \global\advance\subsecno by 1 - \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% -} - -\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz -\def\appendixsubseczzz#1{% - \global\subsubsecno=0 \global\advance\subsecno by 1 - \sectionheading{#1}{subsec}{Yappendix}% - {\appendixletter.\the\secno.\the\subsecno}% -} - -\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz -\def\unnumberedsubseczzz#1{% - \global\subsubsecno=0 \global\advance\subsecno by 1 - \sectionheading{#1}{subsec}{Ynothing}% - {\the\unnumberedno.\the\secno.\the\subsecno}% -} - -% Subsubsections. -\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz -\def\numberedsubsubseczzz#1{% - \global\advance\subsubsecno by 1 - \sectionheading{#1}{subsubsec}{Ynumbered}% - {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% -} - -\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz -\def\appendixsubsubseczzz#1{% - \global\advance\subsubsecno by 1 - \sectionheading{#1}{subsubsec}{Yappendix}% - {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% -} - -\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz -\def\unnumberedsubsubseczzz#1{% - \global\advance\subsubsecno by 1 - \sectionheading{#1}{subsubsec}{Ynothing}% - {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}% -} - -% These macros control what the section commands do, according -% to what kind of chapter we are in (ordinary, appendix, or unnumbered). -% Define them by default for a numbered chapter. -\let\section = \numberedsec -\let\subsection = \numberedsubsec -\let\subsubsection = \numberedsubsubsec - -% Define @majorheading, @heading and @subheading - -% NOTE on use of \vbox for chapter headings, section headings, and such: -% 1) We use \vbox rather than the earlier \line to permit -% overlong headings to fold. -% 2) \hyphenpenalty is set to 10000 because hyphenation in a -% heading is obnoxious; this forbids it. -% 3) Likewise, headings look best if no \parindent is used, and -% if justification is not attempted. Hence \raggedright. - - -\def\majorheading{% - {\advance\chapheadingskip by 10pt \chapbreak }% - \parsearg\chapheadingzzz -} - -\def\chapheading{\chapbreak \parsearg\chapheadingzzz} -\def\chapheadingzzz#1{% - {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}% - \bigskip \par\penalty 200\relax - \suppressfirstparagraphindent -} - -% @heading, @subheading, @subsubheading. -\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{} - \suppressfirstparagraphindent} -\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{} - \suppressfirstparagraphindent} -\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{} - \suppressfirstparagraphindent} - -% These macros generate a chapter, section, etc. heading only -% (including whitespace, linebreaking, etc. around it), -% given all the information in convenient, parsed form. - -%%% Args are the skip and penalty (usually negative) -\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} - -%%% Define plain chapter starts, and page on/off switching for it -% Parameter controlling skip before chapter headings (if needed) - -\newskip\chapheadingskip - -\def\chapbreak{\dobreak \chapheadingskip {-4000}} -\def\chappager{\par\vfill\supereject} -\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} - -\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} - -\def\CHAPPAGoff{% -\global\let\contentsalignmacro = \chappager -\global\let\pchapsepmacro=\chapbreak -\global\let\pagealignmacro=\chappager} - -\def\CHAPPAGon{% -\global\let\contentsalignmacro = \chappager -\global\let\pchapsepmacro=\chappager -\global\let\pagealignmacro=\chappager -\global\def\HEADINGSon{\HEADINGSsingle}} - -\def\CHAPPAGodd{% -\global\let\contentsalignmacro = \chapoddpage -\global\let\pchapsepmacro=\chapoddpage -\global\let\pagealignmacro=\chapoddpage -\global\def\HEADINGSon{\HEADINGSdouble}} - -\CHAPPAGon - -% Chapter opening. -% -% #1 is the text, #2 is the section type (Ynumbered, Ynothing, -% Yappendix, Yomitfromtoc), #3 the chapter number. -% -% To test against our argument. -\def\Ynothingkeyword{Ynothing} -\def\Yomitfromtockeyword{Yomitfromtoc} -\def\Yappendixkeyword{Yappendix} -% -\def\chapmacro#1#2#3{% - \pchapsepmacro - {% - \chapfonts \rm - % - % Have to define \thissection before calling \donoderef, because the - % xref code eventually uses it. On the other hand, it has to be called - % after \pchapsepmacro, or the headline will change too soon. - \gdef\thissection{#1}% - \gdef\thischaptername{#1}% - % - % Only insert the separating space if we have a chapter/appendix - % number, and don't print the unnumbered ``number''. - \def\temptype{#2}% - \ifx\temptype\Ynothingkeyword - \setbox0 = \hbox{}% - \def\toctype{unnchap}% - \def\thischapter{#1}% - \else\ifx\temptype\Yomitfromtockeyword - \setbox0 = \hbox{}% contents like unnumbered, but no toc entry - \def\toctype{omit}% - \xdef\thischapter{}% - \else\ifx\temptype\Yappendixkeyword - \setbox0 = \hbox{\putwordAppendix{} #3\enspace}% - \def\toctype{app}% - % We don't substitute the actual chapter name into \thischapter - % because we don't want its macros evaluated now. And we don't - % use \thissection because that changes with each section. - % - \xdef\thischapter{\putwordAppendix{} \appendixletter: - \noexpand\thischaptername}% - \else - \setbox0 = \hbox{#3\enspace}% - \def\toctype{numchap}% - \xdef\thischapter{\putwordChapter{} \the\chapno: - \noexpand\thischaptername}% - \fi\fi\fi - % - % Write the toc entry for this chapter. Must come before the - % \donoderef, because we include the current node name in the toc - % entry, and \donoderef resets it to empty. - \writetocentry{\toctype}{#1}{#3}% - % - % For pdftex, we have to write out the node definition (aka, make - % the pdfdest) after any page break, but before the actual text has - % been typeset. If the destination for the pdf outline is after the - % text, then jumping from the outline may wind up with the text not - % being visible, for instance under high magnification. - \donoderef{#2}% - % - % Typeset the actual heading. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent=\wd0 \centerparametersmaybe - \unhbox0 #1\par}% - }% - \nobreak\bigskip % no page break after a chapter title - \nobreak -} - -% @centerchap -- centered and unnumbered. -\let\centerparametersmaybe = \relax -\def\centerparameters{% - \advance\rightskip by 3\rightskip - \leftskip = \rightskip - \parfillskip = 0pt -} - - -% I don't think this chapter style is supported any more, so I'm not -% updating it with the new noderef stuff. We'll see. --karl, 11aug03. -% -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} -% -\def\unnchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\nobreak -} -\def\chfopen #1#2{\chapoddpage {\chapfonts -\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% -\par\penalty 5000 % -} -\def\centerchfopen #1{% -\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt - \hfill {\rm #1}\hfill}}\bigskip \par\nobreak -} -\def\CHAPFopen{% - \global\let\chapmacro=\chfopen - \global\let\centerchapmacro=\centerchfopen} - - -% Section titles. These macros combine the section number parts and -% call the generic \sectionheading to do the printing. -% -\newskip\secheadingskip -\def\secheadingbreak{\dobreak \secheadingskip{-1000}} - -% Subsection titles. -\newskip\subsecheadingskip -\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}} - -% Subsubsection titles. -\def\subsubsecheadingskip{\subsecheadingskip} -\def\subsubsecheadingbreak{\subsecheadingbreak} - - -% Print any size, any type, section title. -% -% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is -% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the -% section number. -% -\def\sectionheading#1#2#3#4{% - {% - % Switch to the right set of fonts. - \csname #2fonts\endcsname \rm - % - % Insert space above the heading. - \csname #2headingbreak\endcsname - % - % Only insert the space after the number if we have a section number. - \def\sectionlevel{#2}% - \def\temptype{#3}% - % - \ifx\temptype\Ynothingkeyword - \setbox0 = \hbox{}% - \def\toctype{unn}% - \gdef\thissection{#1}% - \else\ifx\temptype\Yomitfromtockeyword - % for @headings -- no section number, don't include in toc, - % and don't redefine \thissection. - \setbox0 = \hbox{}% - \def\toctype{omit}% - \let\sectionlevel=\empty - \else\ifx\temptype\Yappendixkeyword - \setbox0 = \hbox{#4\enspace}% - \def\toctype{app}% - \gdef\thissection{#1}% - \else - \setbox0 = \hbox{#4\enspace}% - \def\toctype{num}% - \gdef\thissection{#1}% - \fi\fi\fi - % - % Write the toc entry (before \donoderef). See comments in \chfplain. - \writetocentry{\toctype\sectionlevel}{#1}{#4}% - % - % Write the node reference (= pdf destination for pdftex). - % Again, see comments in \chfplain. - \donoderef{#3}% - % - % Output the actual section heading. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright - \hangindent=\wd0 % zero if no section number - \unhbox0 #1}% - }% - % Add extra space after the heading -- half of whatever came above it. - % Don't allow stretch, though. - \kern .5 \csname #2headingskip\endcsname - % - % Do not let the kern be a potential breakpoint, as it would be if it - % was followed by glue. - \nobreak - % - % We'll almost certainly start a paragraph next, so don't let that - % glue accumulate. (Not a breakpoint because it's preceded by a - % discardable item.) - \vskip-\parskip - % - % This is purely so the last item on the list is a known \penalty > - % 10000. This is so \startdefun can avoid allowing breakpoints after - % section headings. Otherwise, it would insert a valid breakpoint between: - % - % @section sec-whatever - % @deffn def-whatever - \penalty 10001 -} - - -\message{toc,} -% Table of contents. -\newwrite\tocfile - -% Write an entry to the toc file, opening it if necessary. -% Called from @chapter, etc. -% -% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno} -% We append the current node name (if any) and page number as additional -% arguments for the \{chap,sec,...}entry macros which will eventually -% read this. The node name is used in the pdf outlines as the -% destination to jump to. -% -% We open the .toc file for writing here instead of at @setfilename (or -% any other fixed time) so that @contents can be anywhere in the document. -% But if #1 is `omit', then we don't do anything. This is used for the -% table of contents chapter openings themselves. -% -\newif\iftocfileopened -\def\omitkeyword{omit}% -% -\def\writetocentry#1#2#3{% - \edef\writetoctype{#1}% - \ifx\writetoctype\omitkeyword \else - \iftocfileopened\else - \immediate\openout\tocfile = \jobname.toc - \global\tocfileopenedtrue - \fi - % - \iflinks - \toks0 = {#2}% - \toks2 = \expandafter{\lastnode}% - \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}% - {\the\toks2}{\noexpand\folio}}}% - \temp - \fi - \fi - % - % Tell \shipout to create a pdf destination on each page, if we're - % writing pdf. These are used in the table of contents. We can't - % just write one on every page because the title pages are numbered - % 1 and 2 (the page numbers aren't printed), and so are the first - % two pages of the document. Thus, we'd have two destinations named - % `1', and two named `2'. - \ifpdf \global\pdfmakepagedesttrue \fi -} - -\newskip\contentsrightmargin \contentsrightmargin=1in -\newcount\savepageno -\newcount\lastnegativepageno \lastnegativepageno = -1 - -% Prepare to read what we've written to \tocfile. -% -\def\startcontents#1{% - % If @setchapternewpage on, and @headings double, the contents should - % start on an odd page, unlike chapters. Thus, we maintain - % \contentsalignmacro in parallel with \pagealignmacro. - % From: Torbjorn Granlund - \contentsalignmacro - \immediate\closeout\tocfile - % - % Don't need to put `Contents' or `Short Contents' in the headline. - % It is abundantly clear what they are. - \def\thischapter{}% - \chapmacro{#1}{Yomitfromtoc}{}% - % - \savepageno = \pageno - \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - % We can't do this, because then an actual ^ in a section - % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97. - %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi - \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -\contentsrightmargin % Don't use the full line length. - % - % Roman numerals for page numbers. - \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi -} - - -% Normal (long) toc. -\def\contents{% - \startcontents{\putwordTOC}% - \openin 1 \jobname.toc - \ifeof 1 \else - \input \jobname.toc - \fi - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \ifeof 1 \else - \pdfmakeoutlines - \fi - \closein 1 - \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno -} - -% And just the chapters. -\def\summarycontents{% - \startcontents{\putwordShortTOC}% - % - \let\numchapentry = \shortchapentry - \let\appentry = \shortchapentry - \let\unnchapentry = \shortunnchapentry - % We want a true roman here for the page numbers. - \secfonts - \let\rm=\shortcontrm \let\bf=\shortcontbf - \let\sl=\shortcontsl \let\tt=\shortconttt - \rm - \hyphenpenalty = 10000 - \advance\baselineskip by 1pt % Open it up a little. - \def\numsecentry##1##2##3##4{} - \let\appsecentry = \numsecentry - \let\unnsecentry = \numsecentry - \let\numsubsecentry = \numsecentry - \let\appsubsecentry = \numsecentry - \let\unnsubsecentry = \numsecentry - \let\numsubsubsecentry = \numsecentry - \let\appsubsubsecentry = \numsecentry - \let\unnsubsubsecentry = \numsecentry - \openin 1 \jobname.toc - \ifeof 1 \else - \input \jobname.toc - \fi - \closein 1 - \vfill \eject - \contentsalignmacro % in case @setchapternewpage odd is in effect - \endgroup - \lastnegativepageno = \pageno - \global\pageno = \savepageno -} -\let\shortcontents = \summarycontents - -% Typeset the label for a chapter or appendix for the short contents. -% The arg is, e.g., `A' for an appendix, or `3' for a chapter. -% -\def\shortchaplabel#1{% - % This space should be enough, since a single number is .5em, and the - % widest letter (M) is 1em, at least in the Computer Modern fonts. - % But use \hss just in case. - % (This space doesn't include the extra space that gets added after - % the label; that gets put in by \shortchapentry above.) - % - % We'd like to right-justify chapter numbers, but that looks strange - % with appendix letters. And right-justifying numbers and - % left-justifying letters looks strange when there is less than 10 - % chapters. Have to read the whole toc once to know how many chapters - % there are before deciding ... - \hbox to 1em{#1\hss}% -} - -% These macros generate individual entries in the table of contents. -% The first argument is the chapter or section name. -% The last argument is the page number. -% The arguments in between are the chapter number, section number, ... - -% Chapters, in the main contents. -\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} -% -% Chapters, in the short toc. -% See comments in \dochapentry re vbox and related settings. -\def\shortchapentry#1#2#3#4{% - \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}% -} - -% Appendices, in the main contents. -% Need the word Appendix, and a fixed-size box. -% -\def\appendixbox#1{% - % We use M since it's probably the widest letter. - \setbox0 = \hbox{\putwordAppendix{} M}% - \hbox to \wd0{\putwordAppendix{} #1\hss}} -% -\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} - -% Unnumbered chapters. -\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} -\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}} - -% Sections. -\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}} -\let\appsecentry=\numsecentry -\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}} - -% Subsections. -\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}} -\let\appsubsecentry=\numsubsecentry -\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}} - -% And subsubsections. -\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}} -\let\appsubsubsecentry=\numsubsubsecentry -\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}} - -% This parameter controls the indentation of the various levels. -% Same as \defaultparindent. -\newdimen\tocindent \tocindent = 15pt - -% Now for the actual typesetting. In all these, #1 is the text and #2 is the -% page number. -% -% If the toc has to be broken over pages, we want it to be at chapters -% if at all possible; hence the \penalty. -\def\dochapentry#1#2{% - \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip - \begingroup - \chapentryfonts - \tocentry{#1}{\dopageno\bgroup#2\egroup}% - \endgroup - \nobreak\vskip .25\baselineskip plus.1\baselineskip -} - -\def\dosecentry#1#2{\begingroup - \secentryfonts \leftskip=\tocindent - \tocentry{#1}{\dopageno\bgroup#2\egroup}% -\endgroup} - -\def\dosubsecentry#1#2{\begingroup - \subsecentryfonts \leftskip=2\tocindent - \tocentry{#1}{\dopageno\bgroup#2\egroup}% -\endgroup} - -\def\dosubsubsecentry#1#2{\begingroup - \subsubsecentryfonts \leftskip=3\tocindent - \tocentry{#1}{\dopageno\bgroup#2\egroup}% -\endgroup} - -% We use the same \entry macro as for the index entries. -\let\tocentry = \entry - -% Space between chapter (or whatever) number and the title. -\def\labelspace{\hskip1em \relax} - -\def\dopageno#1{{\rm #1}} -\def\doshortpageno#1{{\rm #1}} - -\def\chapentryfonts{\secfonts \rm} -\def\secentryfonts{\textfonts} -\def\subsecentryfonts{\textfonts} -\def\subsubsecentryfonts{\textfonts} - - -\message{environments,} -% @foo ... @end foo. - -% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. -% -% Since these characters are used in examples, it should be an even number of -% \tt widths. Each \tt character is 1en, so two makes it 1em. -% -\def\point{$\star$} -\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} -\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} -\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} -\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} - -% The @error{} command. -% Adapted from the TeXbook's \boxit. -% -\newbox\errorbox -% -{\tentt \global\dimen0 = 3em}% Width of the box. -\dimen2 = .55pt % Thickness of rules -% The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} -% -\setbox\errorbox=\hbox to \dimen0{\hfil - \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. - \advance\hsize by -2\dimen2 % Rules. - \vbox{% - \hrule height\dimen2 - \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. - \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. - \kern3pt\vrule width\dimen2}% Space to right. - \hrule height\dimen2} - \hfil} -% -\def\error{\leavevmode\lower.7ex\copy\errorbox} - -% @tex ... @end tex escapes into raw Tex temporarily. -% One exception: @ is still an escape character, so that @end tex works. -% But \@ or @@ will get a plain tex @ character. - -\envdef\tex{% - \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 - \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 - \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie - \catcode `\%=14 - \catcode `\+=\other - \catcode `\"=\other - \catcode `\|=\other - \catcode `\<=\other - \catcode `\>=\other - \escapechar=`\\ - % - \let\b=\ptexb - \let\bullet=\ptexbullet - \let\c=\ptexc - \let\,=\ptexcomma - \let\.=\ptexdot - \let\dots=\ptexdots - \let\equiv=\ptexequiv - \let\!=\ptexexclam - \let\i=\ptexi - \let\indent=\ptexindent - \let\noindent=\ptexnoindent - \let\{=\ptexlbrace - \let\+=\tabalign - \let\}=\ptexrbrace - \let\/=\ptexslash - \let\*=\ptexstar - \let\t=\ptext - % - \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% - \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}% - \def\@{@}% -} -% There is no need to define \Etex. - -% Define @lisp ... @end lisp. -% @lisp environment forms a group so it can rebind things, -% including the definition of @end lisp (which normally is erroneous). - -% Amount to narrow the margins by for @lisp. -\newskip\lispnarrowing \lispnarrowing=0.4in - -% This is the definition that ^^M gets inside @lisp, @example, and other -% such environments. \null is better than a space, since it doesn't -% have any width. -\def\lisppar{\null\endgraf} - -% This space is always present above and below environments. -\newskip\envskipamount \envskipamount = 0pt - -% Make spacing and below environment symmetrical. We use \parskip here -% to help in doing that, since in @example-like environments \parskip -% is reset to zero; thus the \afterenvbreak inserts no space -- but the -% start of the next paragraph will insert \parskip. -% -\def\aboveenvbreak{{% - % =10000 instead of <10000 because of a special case in \itemzzz and - % \sectionheading, q.v. - \ifnum \lastpenalty=10000 \else - \advance\envskipamount by \parskip - \endgraf - \ifdim\lastskip<\envskipamount - \removelastskip - % it's not a good place to break if the last penalty was \nobreak - % or better ... - \ifnum\lastpenalty<10000 \penalty-50 \fi - \vskip\envskipamount - \fi - \fi -}} - -\let\afterenvbreak = \aboveenvbreak - -% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins. -\let\nonarrowing=\relax - -% @cartouche ... @end cartouche: draw rectangle w/rounded corners around -% environment contents. -\font\circle=lcircle10 -\newdimen\circthick -\newdimen\cartouter\newdimen\cartinner -\newskip\normbskip\newskip\normpskip\newskip\normlskip -\circthick=\fontdimen8\circle -% -\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth -\def\ctr{{\hskip 6pt\circle\char'010}} -\def\cbl{{\circle\char'012\hskip -6pt}} -\def\cbr{{\hskip 6pt\circle\char'011}} -\def\carttop{\hbox to \cartouter{\hskip\lskip - \ctl\leaders\hrule height\circthick\hfil\ctr - \hskip\rskip}} -\def\cartbot{\hbox to \cartouter{\hskip\lskip - \cbl\leaders\hrule height\circthick\hfil\cbr - \hskip\rskip}} -% -\newskip\lskip\newskip\rskip - -\envdef\cartouche{% - \ifhmode\par\fi % can't be in the midst of a paragraph. - \startsavinginserts - \lskip=\leftskip \rskip=\rightskip - \leftskip=0pt\rightskip=0pt % we want these *outside*. - \cartinner=\hsize \advance\cartinner by-\lskip - \advance\cartinner by-\rskip - \cartouter=\hsize - \advance\cartouter by 18.4pt % allow for 3pt kerns on either - % side, and for 6pt waste from - % each corner char, and rule thickness - \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip - % Flag to tell @lisp, etc., not to narrow margin. - \let\nonarrowing=\comment - \vbox\bgroup - \baselineskip=0pt\parskip=0pt\lineskip=0pt - \carttop - \hbox\bgroup - \hskip\lskip - \vrule\kern3pt - \vbox\bgroup - \kern3pt - \hsize=\cartinner - \baselineskip=\normbskip - \lineskip=\normlskip - \parskip=\normpskip - \vskip -\parskip - \comment % For explanation, see the end of \def\group. -} -\def\Ecartouche{% - \ifhmode\par\fi - \kern3pt - \egroup - \kern3pt\vrule - \hskip\rskip - \egroup - \cartbot - \egroup - \checkinserts -} - - -% This macro is called at the beginning of all the @example variants, -% inside a group. -\def\nonfillstart{% - \aboveenvbreak - \hfuzz = 12pt % Don't be fussy - \sepspaces % Make spaces be word-separators rather than space tokens. - \let\par = \lisppar % don't ignore blank lines - \obeylines % each line of input is a line of output - \parskip = 0pt - \parindent = 0pt - \emergencystretch = 0pt % don't try to avoid overfull boxes - % @cartouche defines \nonarrowing to inhibit narrowing - % at next level down. - \ifx\nonarrowing\relax - \advance \leftskip by \lispnarrowing - \exdentamount=\lispnarrowing - \fi - \let\exdent=\nofillexdent -} - -% If you want all examples etc. small: @set dispenvsize small. -% If you want even small examples the full size: @set dispenvsize nosmall. -% This affects the following displayed environments: -% @example, @display, @format, @lisp -% -\def\smallword{small} -\def\nosmallword{nosmall} -\let\SETdispenvsize\relax -\def\setnormaldispenv{% - \ifx\SETdispenvsize\smallword - \smallexamplefonts \rm - \fi -} -\def\setsmalldispenv{% - \ifx\SETdispenvsize\nosmallword - \else - \smallexamplefonts \rm - \fi -} - -% We often define two environments, @foo and @smallfoo. -% Let's do it by one command: -\def\makedispenv #1#2{ - \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} - \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} - \expandafter\let\csname E#1\endcsname \afterenvbreak - \expandafter\let\csname Esmall#1\endcsname \afterenvbreak -} - -% Define two synonyms: -\def\maketwodispenvs #1#2#3{ - \makedispenv{#1}{#3} - \makedispenv{#2}{#3} -} - -% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. -% -% @smallexample and @smalllisp: use smaller fonts. -% Originally contributed by Pavel@xerox. -% -\maketwodispenvs {lisp}{example}{% - \nonfillstart - \tt - \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return -} - -% @display/@smalldisplay: same as @lisp except keep current font. -% -\makedispenv {display}{% - \nonfillstart - \gobble -} - -% @format/@smallformat: same as @display except don't narrow margins. -% -\makedispenv{format}{% - \let\nonarrowing = t% - \nonfillstart - \gobble -} - -% @flushleft: same as @format, but doesn't obey \SETdispenvsize. -\envdef\flushleft{% - \let\nonarrowing = t% - \nonfillstart - \gobble -} -\let\Eflushleft = \afterenvbreak - -% @flushright. -% -\envdef\flushright{% - \let\nonarrowing = t% - \nonfillstart - \advance\leftskip by 0pt plus 1fill - \gobble -} -\let\Eflushright = \afterenvbreak - - -% @quotation does normal linebreaking (hence we can't use \nonfillstart) -% and narrows the margins. We keep \parskip nonzero in general, since -% we're doing normal filling. So, when using \aboveenvbreak and -% \afterenvbreak, temporarily make \parskip 0. -% -\envdef\quotation{% - {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip - \parindent=0pt - % - % @cartouche defines \nonarrowing to inhibit narrowing at next level down. - \ifx\nonarrowing\relax - \advance\leftskip by \lispnarrowing - \advance\rightskip by \lispnarrowing - \exdentamount = \lispnarrowing - \let\nonarrowing = \relax - \fi - \parsearg\quotationlabel -} - -% We have retained a nonzero parskip for the environment, since we're -% doing normal filling. -% -\def\Equotation{% - \par - \ifx\quotationauthor\undefined\else - % indent a bit. - \leftline{\kern 2\leftskip \sl ---\quotationauthor}% - \fi - {\parskip=0pt \afterenvbreak}% -} - -% If we're given an argument, typeset it in bold with a colon after. -\def\quotationlabel#1{% - \def\temp{#1}% - \ifx\temp\empty \else - {\bf #1: }% - \fi -} - - -% LaTeX-like @verbatim...@end verbatim and @verb{...} -% If we want to allow any as delimiter, -% we need the curly braces so that makeinfo sees the @verb command, eg: -% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org -% -% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook. -% -% [Knuth] p.344; only we need to do the other characters Texinfo sets -% active too. Otherwise, they get lost as the first character on a -% verbatim line. -\def\dospecials{% - \do\ \do\\\do\{\do\}\do\$\do\&% - \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% - \do\<\do\>\do\|\do\@\do+\do\"% -} -% -% [Knuth] p. 380 -\def\uncatcodespecials{% - \def\do##1{\catcode`##1=\other}\dospecials} -% -% [Knuth] pp. 380,381,391 -% Disable Spanish ligatures ?` and !` of \tt font -\begingroup - \catcode`\`=\active\gdef`{\relax\lq} -\endgroup -% -% Setup for the @verb command. -% -% Eight spaces for a tab -\begingroup - \catcode`\^^I=\active - \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }} -\endgroup -% -\def\setupverb{% - \tt % easiest (and conventionally used) font for verbatim - \def\par{\leavevmode\endgraf}% - \catcode`\`=\active - \tabeightspaces - % Respect line breaks, - % print special symbols as themselves, and - % make each space count - % must do in this order: - \obeylines \uncatcodespecials \sepspaces -} - -% Setup for the @verbatim environment -% -% Real tab expansion -\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount -% -\def\starttabbox{\setbox0=\hbox\bgroup} -\begingroup - \catcode`\^^I=\active - \gdef\tabexpand{% - \catcode`\^^I=\active - \def^^I{\leavevmode\egroup - \dimen0=\wd0 % the width so far, or since the previous tab - \divide\dimen0 by\tabw - \multiply\dimen0 by\tabw % compute previous multiple of \tabw - \advance\dimen0 by\tabw % advance to next multiple of \tabw - \wd0=\dimen0 \box0 \starttabbox - }% - } -\endgroup -\def\setupverbatim{% - \nonfillstart - \advance\leftskip by -\defbodyindent - % Easiest (and conventionally used) font for verbatim - \tt - \def\par{\leavevmode\egroup\box0\endgraf}% - \catcode`\`=\active - \tabexpand - % Respect line breaks, - % print special symbols as themselves, and - % make each space count - % must do in this order: - \obeylines \uncatcodespecials \sepspaces - \everypar{\starttabbox}% -} - -% Do the @verb magic: verbatim text is quoted by unique -% delimiter characters. Before first delimiter expect a -% right brace, after last delimiter expect closing brace: -% -% \def\doverb'{'#1'}'{#1} -% -% [Knuth] p. 382; only eat outer {} -\begingroup - \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other - \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next] -\endgroup -% -\def\verb{\begingroup\setupverb\doverb} -% -% -% Do the @verbatim magic: define the macro \doverbatim so that -% the (first) argument ends when '@end verbatim' is reached, ie: -% -% \def\doverbatim#1@end verbatim{#1} -% -% For Texinfo it's a lot easier than for LaTeX, -% because texinfo's \verbatim doesn't stop at '\end{verbatim}': -% we need not redefine '\', '{' and '}'. -% -% Inspired by LaTeX's verbatim command set [latex.ltx] -% -\begingroup - \catcode`\ =\active - \obeylines % - % ignore everything up to the first ^^M, that's the newline at the end - % of the @verbatim input line itself. Otherwise we get an extra blank - % line in the output. - \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}% - % We really want {...\end verbatim} in the body of the macro, but - % without the active space; thus we have to use \xdef and \gobble. -\endgroup -% -\envdef\verbatim{% - \setupverbatim\doverbatim -} -\let\Everbatim = \afterenvbreak - - -% @verbatiminclude FILE - insert text of file in verbatim environment. -% -\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude} -% -\def\doverbatiminclude#1{% - {% - \makevalueexpandable - \setupverbatim - \input #1 - \afterenvbreak - }% -} - -% @copying ... @end copying. -% Save the text away for @insertcopying later. -% -% We save the uninterpreted tokens, rather than creating a box. -% Saving the text in a box would be much easier, but then all the -% typesetting commands (@smallbook, font changes, etc.) have to be done -% beforehand -- and a) we want @copying to be done first in the source -% file; b) letting users define the frontmatter in as flexible order as -% possible is very desirable. -% -\def\copying{\checkenv{}\begingroup\scanargctxt\docopying} -\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}} -% -\def\insertcopying{% - \begingroup - \parindent = 0pt % paragraph indentation looks wrong on title page - \scanexp\copyingtext - \endgroup -} - -\message{defuns,} -% @defun etc. - -\newskip\defbodyindent \defbodyindent=.4in -\newskip\defargsindent \defargsindent=50pt -\newskip\deflastargmargin \deflastargmargin=18pt - -% Start the processing of @deffn: -\def\startdefun{% - \ifnum\lastpenalty<10000 - \medbreak - \else - % If there are two @def commands in a row, we'll have a \nobreak, - % which is there to keep the function description together with its - % header. But if there's nothing but headers, we need to allow a - % break somewhere. Check specifically for penalty 10002, inserted - % by \defargscommonending, instead of 10000, since the sectioning - % commands also insert a nobreak penalty, and we don't want to allow - % a break between a section heading and a defun. - % - \ifnum\lastpenalty=10002 \penalty2000 \fi - % - % Similarly, after a section heading, do not allow a break. - % But do insert the glue. - \medskip % preceded by discardable penalty, so not a breakpoint - \fi - % - \parindent=0in - \advance\leftskip by \defbodyindent - \exdentamount=\defbodyindent -} - -\def\dodefunx#1{% - % First, check whether we are in the right environment: - \checkenv#1% - % - % As above, allow line break if we have multiple x headers in a row. - % It's not a great place, though. - \ifnum\lastpenalty=10002 \penalty3000 \fi - % - % And now, it's time to reuse the body of the original defun: - \expandafter\gobbledefun#1% -} -\def\gobbledefun#1\startdefun{} - -% \printdefunline \deffnheader{text} -% -\def\printdefunline#1#2{% - \begingroup - % call \deffnheader: - #1#2 \endheader - % common ending: - \interlinepenalty = 10000 - \advance\rightskip by 0pt plus 1fil - \endgraf - \nobreak\vskip -\parskip - \penalty 10002 % signal to \startdefun and \dodefunx - % Some of the @defun-type tags do not enable magic parentheses, - % rendering the following check redundant. But we don't optimize. - \checkparencounts - \endgroup -} - -\def\Edefun{\endgraf\medbreak} - -% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; -% the only thing remainnig is to define \deffnheader. -% -\def\makedefun#1{% - \expandafter\let\csname E#1\endcsname = \Edefun - \edef\temp{\noexpand\domakedefun - \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}% - \temp -} - -% \domakedefun \deffn \deffnx \deffnheader -% -% Define \deffn and \deffnx, without parameters. -% \deffnheader has to be defined explicitly. -% -\def\domakedefun#1#2#3{% - \envdef#1{% - \startdefun - \parseargusing\activeparens{\printdefunline#3}% - }% - \def#2{\dodefunx#1}% - \def#3% -} - -%%% Untyped functions: - -% @deffn category name args -\makedefun{deffn}{\deffngeneral{}} - -% @deffn category class name args -\makedefun{defop}#1 {\defopon{#1\ \putwordon}} - -% \defopon {category on}class name args -\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } - -% \deffngeneral {subind}category name args -% -\def\deffngeneral#1#2 #3 #4\endheader{% - % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}. - \dosubind{fn}{\code{#3}}{#1}% - \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% -} - -%%% Typed functions: - -% @deftypefn category type name args -\makedefun{deftypefn}{\deftypefngeneral{}} - -% @deftypeop category class type name args -\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}} - -% \deftypeopon {category on}class type name args -\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} } - -% \deftypefngeneral {subind}category type name args -% -\def\deftypefngeneral#1#2 #3 #4 #5\endheader{% - \dosubind{fn}{\code{#4}}{#1}% - \defname{#2}{#3}{#4}\defunargs{#5\unskip}% -} - -%%% Typed variables: - -% @deftypevr category type var args -\makedefun{deftypevr}{\deftypecvgeneral{}} - -% @deftypecv category class type var args -\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}} - -% \deftypecvof {category of}class type var args -\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} } - -% \deftypecvgeneral {subind}category type var args -% -\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{% - \dosubind{vr}{\code{#4}}{#1}% - \defname{#2}{#3}{#4}\defunargs{#5\unskip}% -} - -%%% Untyped variables: - -% @defvr category var args -\makedefun{defvr}#1 {\deftypevrheader{#1} {} } - -% @defcv category class var args -\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}} - -% \defcvof {category of}class var args -\def\defcvof#1#2 {\deftypecvof{#1}#2 {} } - -%%% Type: -% @deftp category name args -\makedefun{deftp}#1 #2 #3\endheader{% - \doind{tp}{\code{#2}}% - \defname{#1}{}{#2}\defunargs{#3\unskip}% -} - -% Remaining @defun-like shortcuts: -\makedefun{defun}{\deffnheader{\putwordDeffunc} } -\makedefun{defmac}{\deffnheader{\putwordDefmac} } -\makedefun{defspec}{\deffnheader{\putwordDefspec} } -\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} } -\makedefun{defvar}{\defvrheader{\putwordDefvar} } -\makedefun{defopt}{\defvrheader{\putwordDefopt} } -\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} } -\makedefun{defmethod}{\defopon\putwordMethodon} -\makedefun{deftypemethod}{\deftypeopon\putwordMethodon} -\makedefun{defivar}{\defcvof\putwordInstanceVariableof} -\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof} - -% \defname, which formats the name of the @def (not the args). -% #1 is the category, such as "Function". -% #2 is the return type, if any. -% #3 is the function name. -% -% We are followed by (but not passed) the arguments, if any. -% -\def\defname#1#2#3{% - % Get the values of \leftskip and \rightskip as they were outside the @def... - \advance\leftskip by -\defbodyindent - % - % How we'll format the type name. Putting it in brackets helps - % distinguish it from the body text that may end up on the next line - % just below it. - \def\temp{#1}% - \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} - % - % Figure out line sizes for the paragraph shape. - % The first line needs space for \box0; but if \rightskip is nonzero, - % we need only space for the part of \box0 which exceeds it: - \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip - % The continuations: - \dimen2=\hsize \advance\dimen2 by -\defargsindent - % (plain.tex says that \dimen1 should be used only as global.) - \parshape 2 0in \dimen0 \defargsindent \dimen2 - % - % Put the type name to the right margin. - \noindent - \hbox to 0pt{% - \hfil\box0 \kern-\hsize - % \hsize has to be shortened this way: - \kern\leftskip - % Intentionally do not respect \rightskip, since we need the space. - }% - % - % Allow all lines to be underfull without complaint: - \tolerance=10000 \hbadness=10000 - \exdentamount=\defbodyindent - {% - % defun fonts. We use typewriter by default (used to be bold) because: - % . we're printing identifiers, they should be in tt in principle. - % . in languages with many accents, such as Czech or French, it's - % common to leave accents off identifiers. The result looks ok in - % tt, but exceedingly strange in rm. - % . we don't want -- and --- to be treated as ligatures. - % . this still does not fix the ?` and !` ligatures, but so far no - % one has made identifiers using them :). - \df \tt - \def\temp{#2}% return value type - \ifx\temp\empty\else \tclose{\temp} \fi - #3% output function name - }% - {\rm\enskip}% hskip 0.5 em of \tenrm - % - \boldbrax - % arguments will be output next, if any. -} - -% Print arguments in slanted roman (not ttsl), inconsistently with using -% tt for the name. This is because literal text is sometimes needed in -% the argument list (groff manual), and ttsl and tt are not very -% distinguishable. Prevent hyphenation at `-' chars. -% -\def\defunargs#1{% - % use sl by default (not ttsl), - % tt for the names. - \df \sl \hyphenchar\font=0 - % - % On the other hand, if an argument has two dashes (for instance), we - % want a way to get ttsl. Let's try @var for that. - \let\var=\ttslanted - #1% - \sl\hyphenchar\font=45 -} - -% We want ()&[] to print specially on the defun line. -% -\def\activeparens{% - \catcode`\(=\active \catcode`\)=\active - \catcode`\[=\active \catcode`\]=\active - \catcode`\&=\active -} - -% Make control sequences which act like normal parenthesis chars. -\let\lparen = ( \let\rparen = ) - -% Be sure that we always have a definition for `(', etc. For example, -% if the fn name has parens in it, \boldbrax will not be in effect yet, -% so TeX would otherwise complain about undefined control sequence. -{ - \activeparens - \global\let(=\lparen \global\let)=\rparen - \global\let[=\lbrack \global\let]=\rbrack - \global\let& = \& - - \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} - \gdef\magicamp{\let&=\amprm} -} - -\newcount\parencount - -% If we encounter &foo, then turn on ()-hacking afterwards -\newif\ifampseen -\def\amprm#1 {\ampseentrue{\bf\ }} - -\def\parenfont{% - \ifampseen - % At the first level, print parens in roman, - % otherwise use the default font. - \ifnum \parencount=1 \rm \fi - \else - % The \sf parens (in \boldbrax) actually are a little bolder than - % the contained text. This is especially needed for [ and ] . - \sf - \fi -} -\def\infirstlevel#1{% - \ifampseen - \ifnum\parencount=1 - #1% - \fi - \fi -} -\def\bfafterword#1 {#1 \bf} - -\def\opnr{% - \global\advance\parencount by 1 - {\parenfont(}% - \infirstlevel \bfafterword -} -\def\clnr{% - {\parenfont)}% - \infirstlevel \sl - \global\advance\parencount by -1 -} - -\newcount\brackcount -\def\lbrb{% - \global\advance\brackcount by 1 - {\bf[}% -} -\def\rbrb{% - {\bf]}% - \global\advance\brackcount by -1 -} - -\def\checkparencounts{% - \ifnum\parencount=0 \else \badparencount \fi - \ifnum\brackcount=0 \else \badbrackcount \fi -} -\def\badparencount{% - \errmessage{Unbalanced parentheses in @def}% - \global\parencount=0 -} -\def\badbrackcount{% - \errmessage{Unbalanced square braces in @def}% - \global\brackcount=0 -} - - -\message{macros,} -% @macro. - -% To do this right we need a feature of e-TeX, \scantokens, -% which we arrange to emulate with a temporary file in ordinary TeX. -\ifx\eTeXversion\undefined - \newwrite\macscribble - \def\scantokens#1{% - \toks0={#1}% - \immediate\openout\macscribble=\jobname.tmp - \immediate\write\macscribble{\the\toks0}% - \immediate\closeout\macscribble - \input \jobname.tmp - } -\fi - -\def\scanmacro#1{% - \begingroup - \newlinechar`\^^M - \let\xeatspaces\eatspaces - % Undo catcode changes of \startcontents and \doprintindex - % When called from @insertcopying or (short)caption, we need active - % backslash to get it printed correctly. Previously, we had - % \catcode`\\=\other instead. We'll see whether a problem appears - % with macro expansion. --kasal, 19aug04 - \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ - % ... and \example - \spaceisspace - % - % Append \endinput to make sure that TeX does not see the ending newline. - % - % I've verified that it is necessary both for e-TeX and for ordinary TeX - % --kasal, 29nov03 - \scantokens{#1\endinput}% - \endgroup -} - -\def\scanexp#1{% - \edef\temp{\noexpand\scanmacro{#1}}% - \temp -} - -\newcount\paramno % Count of parameters -\newtoks\macname % Macro name -\newif\ifrecursive % Is it recursive? -\def\macrolist{} % List of all defined macros in the form - % \do\macro1\do\macro2... - -% Utility routines. -% This does \let #1 = #2, with \csnames; that is, -% \let \csname#1\endcsname = \csname#2\endcsname -% (except of course we have to play expansion games). -% -\def\cslet#1#2{% - \expandafter\let - \csname#1\expandafter\endcsname - \csname#2\endcsname -} - -% Trim leading and trailing spaces off a string. -% Concepts from aro-bend problem 15 (see CTAN). -{\catcode`\@=11 -\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }} -\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@} -\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @} -\def\unbrace#1{#1} -\unbrace{\gdef\trim@@@ #1 } #2@{#1} -} - -% Trim a single trailing ^^M off a string. -{\catcode`\^^M=\other \catcode`\Q=3% -\gdef\eatcr #1{\eatcra #1Q^^MQ}% -\gdef\eatcra#1^^MQ{\eatcrb#1Q}% -\gdef\eatcrb#1Q#2Q{#1}% -} - -% Macro bodies are absorbed as an argument in a context where -% all characters are catcode 10, 11 or 12, except \ which is active -% (as in normal texinfo). It is necessary to change the definition of \. - -% It's necessary to have hard CRs when the macro is executed. This is -% done by making ^^M (\endlinechar) catcode 12 when reading the macro -% body, and then making it the \newlinechar in \scanmacro. - -\def\scanctxt{% - \catcode`\"=\other - \catcode`\+=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\@=\other - \catcode`\^=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\~=\other -} - -\def\scanargctxt{% - \scanctxt - \catcode`\\=\other - \catcode`\^^M=\other -} - -\def\macrobodyctxt{% - \scanctxt - \catcode`\{=\other - \catcode`\}=\other - \catcode`\^^M=\other - \usembodybackslash -} - -\def\macroargctxt{% - \scanctxt - \catcode`\\=\other -} - -% \mbodybackslash is the definition of \ in @macro bodies. -% It maps \foo\ => \csname macarg.foo\endcsname => #N -% where N is the macro parameter number. -% We define \csname macarg.\endcsname to be \realbackslash, so -% \\ in macro replacement text gets you a backslash. - -{\catcode`@=0 @catcode`@\=@active - @gdef@usembodybackslash{@let\=@mbodybackslash} - @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} -} -\expandafter\def\csname macarg.\endcsname{\realbackslash} - -\def\macro{\recursivefalse\parsearg\macroxxx} -\def\rmacro{\recursivetrue\parsearg\macroxxx} - -\def\macroxxx#1{% - \getargs{#1}% now \macname is the macname and \argl the arglist - \ifx\argl\empty % no arguments - \paramno=0% - \else - \expandafter\parsemargdef \argl;% - \fi - \if1\csname ismacro.\the\macname\endcsname - \message{Warning: redefining \the\macname}% - \else - \expandafter\ifx\csname \the\macname\endcsname \relax - \else \errmessage{Macro name \the\macname\space already defined}\fi - \global\cslet{macsave.\the\macname}{\the\macname}% - \global\expandafter\let\csname ismacro.\the\macname\endcsname=1% - % Add the macroname to \macrolist - \toks0 = \expandafter{\macrolist\do}% - \xdef\macrolist{\the\toks0 - \expandafter\noexpand\csname\the\macname\endcsname}% - \fi - \begingroup \macrobodyctxt - \ifrecursive \expandafter\parsermacbody - \else \expandafter\parsemacbody - \fi} - -\parseargdef\unmacro{% - \if1\csname ismacro.#1\endcsname - \global\cslet{#1}{macsave.#1}% - \global\expandafter\let \csname ismacro.#1\endcsname=0% - % Remove the macro name from \macrolist: - \begingroup - \expandafter\let\csname#1\endcsname \relax - \let\do\unmacrodo - \xdef\macrolist{\macrolist}% - \endgroup - \else - \errmessage{Macro #1 not defined}% - \fi -} - -% Called by \do from \dounmacro on each macro. The idea is to omit any -% macro definitions that have been changed to \relax. -% -\def\unmacrodo#1{% - \ifx#1\relax - % remove this - \else - \noexpand\do \noexpand #1% - \fi -} - -% This makes use of the obscure feature that if the last token of a -% is #, then the preceding argument is delimited by -% an opening brace, and that opening brace is not consumed. -\def\getargs#1{\getargsxxx#1{}} -\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} -\def\getmacname #1 #2\relax{\macname={#1}} -\def\getmacargs#1{\def\argl{#1}} - -% Parse the optional {params} list. Set up \paramno and \paramlist -% so \defmacro knows what to do. Define \macarg.blah for each blah -% in the params list, to be ##N where N is the position in that list. -% That gets used by \mbodybackslash (above). - -% We need to get `macro parameter char #' into several definitions. -% The technique used is stolen from LaTeX: let \hash be something -% unexpandable, insert that wherever you need a #, and then redefine -% it to # just before using the token list produced. -% -% The same technique is used to protect \eatspaces till just before -% the macro is used. - -\def\parsemargdef#1;{\paramno=0\def\paramlist{}% - \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} -\def\parsemargdefxxx#1,{% - \if#1;\let\next=\relax - \else \let\next=\parsemargdefxxx - \advance\paramno by 1% - \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname - {\xeatspaces{\hash\the\paramno}}% - \edef\paramlist{\paramlist\hash\the\paramno,}% - \fi\next} - -% These two commands read recursive and nonrecursive macro bodies. -% (They're different since rec and nonrec macros end differently.) - -\long\def\parsemacbody#1@end macro% -{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% -\long\def\parsermacbody#1@end rmacro% -{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% - -% This defines the macro itself. There are six cases: recursive and -% nonrecursive macros of zero, one, and many arguments. -% Much magic with \expandafter here. -% \xdef is used so that macro definitions will survive the file -% they're defined in; @include reads the file inside a group. -\def\defmacro{% - \let\hash=##% convert placeholders to macro parameter chars - \ifrecursive - \ifcase\paramno - % 0 - \expandafter\xdef\csname\the\macname\endcsname{% - \noexpand\scanmacro{\temp}}% - \or % 1 - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\braceorline - \expandafter\noexpand\csname\the\macname xxx\endcsname}% - \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \egroup\noexpand\scanmacro{\temp}}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{\egroup\noexpand\scanmacro{\temp}}% - \fi - \else - \ifcase\paramno - % 0 - \expandafter\xdef\csname\the\macname\endcsname{% - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% - \or % 1 - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\braceorline - \expandafter\noexpand\csname\the\macname xxx\endcsname}% - \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \expandafter\noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{% - \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% - \fi - \fi} - -\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} - -% \braceorline decides whether the next nonwhitespace character is a -% {. If so it reads up to the closing }, if not, it reads the whole -% line. Whatever was read is then fed to the next control sequence -% as an argument (by \parsebrace or \parsearg) -\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx} -\def\braceorlinexxx{% - \ifx\nchar\bgroup\else - \expandafter\parsearg - \fi \next} - -% We want to disable all macros during \shipout so that they are not -% expanded by \write. -\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% - \edef\next{\macrolist}\expandafter\endgroup\next} - -% For \indexnofonts, we need to get rid of all macros, leaving only the -% arguments (if present). Of course this is not nearly correct, but it -% is the best we can do for now. makeinfo does not expand macros in the -% argument to @deffn, which ends up writing an index entry, and texindex -% isn't prepared for an index sort entry that starts with \. -% -% Since macro invocations are followed by braces, we can just redefine them -% to take a single TeX argument. The case of a macro invocation that -% goes to end-of-line is not handled. -% -\def\emptyusermacros{\begingroup - \def\do##1{\let\noexpand##1=\noexpand\asis}% - \edef\next{\macrolist}\expandafter\endgroup\next} - - -% @alias. -% We need some trickery to remove the optional spaces around the equal -% sign. Just make them active and then expand them all to nothing. -\def\alias{\parseargusing\obeyspaces\aliasxxx} -\def\aliasxxx #1{\aliasyyy#1\relax} -\def\aliasyyy #1=#2\relax{% - {% - \expandafter\let\obeyedspace=\empty - \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}% - }% - \next -} - - -\message{cross references,} - -\newwrite\auxfile - -\newif\ifhavexrefs % True if xref values are known. -\newif\ifwarnedxrefs % True if we warned once that they aren't known. - -% @inforef is relatively simple. -\def\inforef #1{\inforefzzz #1,,,,**} -\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, - node \samp{\ignorespaces#1{}}} - -% @node's only job in TeX is to define \lastnode, which is used in -% cross-references. The @node line might or might not have commas, and -% might or might not have spaces before the first comma, like: -% @node foo , bar , ... -% We don't want such trailing spaces in the node name. -% -\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse} -% -% also remove a trailing comma, in case of something like this: -% @node Help-Cross, , , Cross-refs -\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse} -\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}} - -\let\nwnode=\node -\let\lastnode=\empty - -% Write a cross-reference definition for the current node. #1 is the -% type (Ynumbered, Yappendix, Ynothing). -% -\def\donoderef#1{% - \ifx\lastnode\empty\else - \setref{\lastnode}{#1}% - \global\let\lastnode=\empty - \fi -} - -% @anchor{NAME} -- define xref target at arbitrary point. -% -\newcount\savesfregister -% -\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi} -\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi} -\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces} - -% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an -% anchor), which consists of three parts: -% 1) NAME-title - the current sectioning name taken from \thissection, -% or the anchor name. -% 2) NAME-snt - section number and type, passed as the SNT arg, or -% empty for anchors. -% 3) NAME-pg - the page number. -% -% This is called from \donoderef, \anchor, and \dofloat. In the case of -% floats, there is an additional part, which is not written here: -% 4) NAME-lof - the text as it should appear in a @listoffloats. -% -\def\setref#1#2{% - \pdfmkdest{#1}% - \iflinks - {% - \atdummies % preserve commands, but don't expand them - \turnoffactive - \otherbackslash - \edef\writexrdef##1##2{% - \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef - ##1}{##2}}% these are parameters of \writexrdef - }% - \toks0 = \expandafter{\thissection}% - \immediate \writexrdef{title}{\the\toks0 }% - \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. - \writexrdef{pg}{\folio}% will be written later, during \shipout - }% - \fi -} - -% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is -% the node name, #2 the name of the Info cross-reference, #3 the printed -% node name, #4 the name of the Info file, #5 the name of the printed -% manual. All but the node name can be omitted. -% -\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} -\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} -\def\ref#1{\xrefX[#1,,,,,,,]} -\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup - \unsepspaces - \def\printedmanual{\ignorespaces #5}% - \def\printedrefname{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual\unskip}% - \setbox0=\hbox{\printedrefname\unskip}% - \ifdim \wd0 = 0pt - % No printed node name was explicitly given. - \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax - % Use the node name inside the square brackets. - \def\printedrefname{\ignorespaces #1}% - \else - % Use the actual chapter/section title appear inside - % the square brackets. Use the real section title if we have it. - \ifdim \wd1 > 0pt - % It is in another manual, so we don't have it. - \def\printedrefname{\ignorespaces #1}% - \else - \ifhavexrefs - % We know the real title if we have the xref values. - \def\printedrefname{\refx{#1-title}{}}% - \else - % Otherwise just copy the Info node name. - \def\printedrefname{\ignorespaces #1}% - \fi% - \fi - \fi - \fi - % - % Make link in pdf output. - \ifpdf - \leavevmode - \getfilename{#4}% - {\turnoffactive \otherbackslash - \ifnum\filenamelength>0 - \startlink attr{/Border [0 0 0]}% - goto file{\the\filename.pdf} name{#1}% - \else - \startlink attr{/Border [0 0 0]}% - goto name{\pdfmkpgn{#1}}% - \fi - }% - \linkcolor - \fi - % - % Float references are printed completely differently: "Figure 1.2" - % instead of "[somenode], p.3". We distinguish them by the - % LABEL-title being set to a magic string. - {% - % Have to otherify everything special to allow the \csname to - % include an _ in the xref name, etc. - \indexnofonts - \turnoffactive - \otherbackslash - \expandafter\global\expandafter\let\expandafter\Xthisreftitle - \csname XR#1-title\endcsname - }% - \iffloat\Xthisreftitle - % If the user specified the print name (third arg) to the ref, - % print it instead of our usual "Figure 1.2". - \ifdim\wd0 = 0pt - \refx{#1-snt}% - \else - \printedrefname - \fi - % - % if the user also gave the printed manual name (fifth arg), append - % "in MANUALNAME". - \ifdim \wd1 > 0pt - \space \putwordin{} \cite{\printedmanual}% - \fi - \else - % node/anchor (non-float) references. - % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. - \ifdim \wd1 > 0pt - \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% - \else - % _ (for example) has to be the character _ for the purposes of the - % control sequence corresponding to the node, but it has to expand - % into the usual \leavevmode...\vrule stuff for purposes of - % printing. So we \turnoffactive for the \refx-snt, back on for the - % printing, back off for the \refx-pg. - {\turnoffactive \otherbackslash - % Only output a following space if the -snt ref is nonempty; for - % @unnumbered and @anchor, it won't be. - \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% - \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi - }% - % output the `[mynode]' via a macro so it can be overridden. - \xrefprintnodename\printedrefname - % - % But we always want a comma and a space: - ,\space - % - % output the `page 3'. - \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}% - \fi - \fi - \endlink -\endgroup} - -% This macro is called from \xrefX for the `[nodename]' part of xref -% output. It's a separate macro only so it can be changed more easily, -% since square brackets don't work well in some documents. Particularly -% one that Bob is working on :). -% -\def\xrefprintnodename#1{[#1]} - -% Things referred to by \setref. -% -\def\Ynothing{} -\def\Yomitfromtoc{} -\def\Ynumbered{% - \ifnum\secno=0 - \putwordChapter@tie \the\chapno - \else \ifnum\subsecno=0 - \putwordSection@tie \the\chapno.\the\secno - \else \ifnum\subsubsecno=0 - \putwordSection@tie \the\chapno.\the\secno.\the\subsecno - \else - \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno - \fi\fi\fi -} -\def\Yappendix{% - \ifnum\secno=0 - \putwordAppendix@tie @char\the\appendixno{}% - \else \ifnum\subsecno=0 - \putwordSection@tie @char\the\appendixno.\the\secno - \else \ifnum\subsubsecno=0 - \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno - \else - \putwordSection@tie - @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno - \fi\fi\fi -} - -% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. -% If its value is nonempty, SUFFIX is output afterward. -% -\def\refx#1#2{% - {% - \indexnofonts - \otherbackslash - \expandafter\global\expandafter\let\expandafter\thisrefX - \csname XR#1\endcsname - }% - \ifx\thisrefX\relax - % If not defined, say something at least. - \angleleft un\-de\-fined\angleright - \iflinks - \ifhavexrefs - \message{\linenumber Undefined cross reference `#1'.}% - \else - \ifwarnedxrefs\else - \global\warnedxrefstrue - \message{Cross reference values unknown; you must run TeX again.}% - \fi - \fi - \fi - \else - % It's defined, so just use it. - \thisrefX - \fi - #2% Output the suffix in any case. -} - -% This is the macro invoked by entries in the aux file. Usually it's -% just a \def (we prepend XR to the control sequence name to avoid -% collisions). But if this is a float type, we have more work to do. -% -\def\xrdef#1#2{% - \expandafter\gdef\csname XR#1\endcsname{#2}% remember this xref value. - % - % Was that xref control sequence that we just defined for a float? - \expandafter\iffloat\csname XR#1\endcsname - % it was a float, and we have the (safe) float type in \iffloattype. - \expandafter\let\expandafter\floatlist - \csname floatlist\iffloattype\endcsname - % - % Is this the first time we've seen this float type? - \expandafter\ifx\floatlist\relax - \toks0 = {\do}% yes, so just \do - \else - % had it before, so preserve previous elements in list. - \toks0 = \expandafter{\floatlist\do}% - \fi - % - % Remember this xref in the control sequence \floatlistFLOATTYPE, - % for later use in \listoffloats. - \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0{#1}}% - \fi -} - -% Read the last existing aux file, if any. No error if none exists. -% -\def\tryauxfile{% - \openin 1 \jobname.aux - \ifeof 1 \else - \readauxfile - \global\havexrefstrue - \fi - \closein 1 -} - -\def\readauxfile{\begingroup - \catcode`\^^@=\other - \catcode`\^^A=\other - \catcode`\^^B=\other - \catcode`\^^C=\other - \catcode`\^^D=\other - \catcode`\^^E=\other - \catcode`\^^F=\other - \catcode`\^^G=\other - \catcode`\^^H=\other - \catcode`\^^K=\other - \catcode`\^^L=\other - \catcode`\^^N=\other - \catcode`\^^P=\other - \catcode`\^^Q=\other - \catcode`\^^R=\other - \catcode`\^^S=\other - \catcode`\^^T=\other - \catcode`\^^U=\other - \catcode`\^^V=\other - \catcode`\^^W=\other - \catcode`\^^X=\other - \catcode`\^^Z=\other - \catcode`\^^[=\other - \catcode`\^^\=\other - \catcode`\^^]=\other - \catcode`\^^^=\other - \catcode`\^^_=\other - % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc. - % in xref tags, i.e., node names. But since ^^e4 notation isn't - % supported in the main text, it doesn't seem desirable. Furthermore, - % that is not enough: for node names that actually contain a ^ - % character, we would end up writing a line like this: 'xrdef {'hat - % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first - % argument, and \hat is not an expandable control sequence. It could - % all be worked out, but why? Either we support ^^ or we don't. - % - % The other change necessary for this was to define \auxhat: - % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter - % and then to call \auxhat in \setq. - % - \catcode`\^=\other - % - % Special characters. Should be turned off anyway, but... - \catcode`\~=\other - \catcode`\[=\other - \catcode`\]=\other - \catcode`\"=\other - \catcode`\_=\other - \catcode`\|=\other - \catcode`\<=\other - \catcode`\>=\other - \catcode`\$=\other - \catcode`\#=\other - \catcode`\&=\other - \catcode`\%=\other - \catcode`+=\other % avoid \+ for paranoia even though we've turned it off - % - % This is to support \ in node names and titles, since the \ - % characters end up in a \csname. It's easier than - % leaving it active and making its active definition an actual \ - % character. What I don't understand is why it works in the *value* - % of the xrdef. Seems like it should be a catcode12 \, and that - % should not typeset properly. But it works, so I'm moving on for - % now. --karl, 15jan04. - \catcode`\\=\other - % - % Make the characters 128-255 be printing characters. - {% - \count 1=128 - \def\loop{% - \catcode\count 1=\other - \advance\count 1 by 1 - \ifnum \count 1<256 \loop \fi - }% - }% - % - % @ is our escape character in .aux files, and we need braces. - \catcode`\{=1 - \catcode`\}=2 - \catcode`\@=0 - % - \input \jobname.aux -\endgroup} - - -\message{insertions,} -% including footnotes. - -\newcount \footnoteno - -% The trailing space in the following definition for supereject is -% vital for proper filling; pages come out unaligned when you do a -% pagealignmacro call if that space before the closing brace is -% removed. (Generally, numeric constants should always be followed by a -% space to prevent strange expansion errors.) -\def\supereject{\par\penalty -20000\footnoteno =0 } - -% @footnotestyle is meaningful for info output only. -\let\footnotestyle=\comment - -{\catcode `\@=11 -% -% Auto-number footnotes. Otherwise like plain. -\gdef\footnote{% - \let\indent=\ptexindent - \let\noindent=\ptexnoindent - \global\advance\footnoteno by \@ne - \edef\thisfootno{$^{\the\footnoteno}$}% - % - % In case the footnote comes at the end of a sentence, preserve the - % extra spacing after we do the footnote number. - \let\@sf\empty - \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi - % - % Remove inadvertent blank space before typesetting the footnote number. - \unskip - \thisfootno\@sf - \dofootnote -}% - -% Don't bother with the trickery in plain.tex to not require the -% footnote text as a parameter. Our footnotes don't need to be so general. -% -% Oh yes, they do; otherwise, @ifset (and anything else that uses -% \parseargline) fails inside footnotes because the tokens are fixed when -% the footnote is read. --karl, 16nov96. -% -\gdef\dofootnote{% - \insert\footins\bgroup - % We want to typeset this text as a normal paragraph, even if the - % footnote reference occurs in (for example) a display environment. - % So reset some parameters. - \hsize=\pagewidth - \interlinepenalty\interfootnotelinepenalty - \splittopskip\ht\strutbox % top baseline for broken footnotes - \splitmaxdepth\dp\strutbox - \floatingpenalty\@MM - \leftskip\z@skip - \rightskip\z@skip - \spaceskip\z@skip - \xspaceskip\z@skip - \parindent\defaultparindent - % - \smallfonts \rm - % - % Because we use hanging indentation in footnotes, a @noindent appears - % to exdent this text, so make it be a no-op. makeinfo does not use - % hanging indentation so @noindent can still be needed within footnote - % text after an @example or the like (not that this is good style). - \let\noindent = \relax - % - % Hang the footnote text off the number. Use \everypar in case the - % footnote extends for more than one paragraph. - \everypar = {\hang}% - \textindent{\thisfootno}% - % - % Don't crash into the line above the footnote text. Since this - % expands into a box, it must come within the paragraph, lest it - % provide a place where TeX can split the footnote. - \footstrut - \futurelet\next\fo@t -} -}%end \catcode `\@=11 - -% In case a @footnote appears in a vbox, save the footnote text and create -% the real \insert just after the vbox finished. Otherwise, the insertion -% would be lost. -% Similarily, if a @footnote appears inside an alignment, save the footnote -% text to a box and make the \insert when a row of the table is finished. -% And the same can be done for other insert classes. --kasal, 16nov03. - -% Replace the \insert primitive by a cheating macro. -% Deeper inside, just make sure that the saved insertions are not spilled -% out prematurely. -% -\def\startsavinginserts{% - \ifx \insert\ptexinsert - \let\insert\saveinsert - \else - \let\checkinserts\relax - \fi -} - -% This \insert replacement works for both \insert\footins{foo} and -% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}. -% -\def\saveinsert#1{% - \edef\next{\noexpand\savetobox \makeSAVEname#1}% - \afterassignment\next - % swallow the left brace - \let\temp = -} -\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}} -\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1} - -\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi} - -\def\placesaveins#1{% - \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname - {\box#1}% -} - -% eat @SAVE -- beware, all of them have catcode \other: -{ - \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials % ;-) - \gdef\gobblesave @SAVE{} -} - -% initialization: -\def\newsaveins #1{% - \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}% - \next -} -\def\newsaveinsX #1{% - \csname newbox\endcsname #1% - \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts - \checksaveins #1}% -} - -% initialize: -\let\checkinserts\empty -\newsaveins\footins -\newsaveins\margin - - -% @image. We use the macros from epsf.tex to support this. -% If epsf.tex is not installed and @image is used, we complain. -% -% Check for and read epsf.tex up front. If we read it only at @image -% time, we might be inside a group, and then its definitions would get -% undone and the next image would fail. -\openin 1 = epsf.tex -\ifeof 1 \else - % Do not bother showing banner with epsf.tex v2.7k (available in - % doc/epsf.tex and on ctan). - \def\epsfannounce{\toks0 = }% - \input epsf.tex -\fi -\closein 1 -% -% We will only complain once about lack of epsf.tex. -\newif\ifwarnednoepsf -\newhelp\noepsfhelp{epsf.tex must be installed for images to - work. It is also included in the Texinfo distribution, or you can get - it from ftp://tug.org/tex/epsf.tex.} -% -\def\image#1{% - \ifx\epsfbox\undefined - \ifwarnednoepsf \else - \errhelp = \noepsfhelp - \errmessage{epsf.tex not found, images will be ignored}% - \global\warnednoepsftrue - \fi - \else - \imagexxx #1,,,,,\finish - \fi -} -% -% Arguments to @image: -% #1 is (mandatory) image filename; we tack on .eps extension. -% #2 is (optional) width, #3 is (optional) height. -% #4 is (ignored optional) html alt text. -% #5 is (ignored optional) extension. -% #6 is just the usual extra ignored arg for parsing this stuff. -\newif\ifimagevmode -\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup - \catcode`\^^M = 5 % in case we're inside an example - \normalturnoffactive % allow _ et al. in names - % If the image is by itself, center it. - \ifvmode - \imagevmodetrue - \nobreak\bigskip - % Usually we'll have text after the image which will insert - % \parskip glue, so insert it here too to equalize the space - % above and below. - \nobreak\vskip\parskip - \nobreak - \line\bgroup\hss - \fi - % - % Output the image. - \ifpdf - \dopdfimage{#1}{#2}{#3}% - \else - % \epsfbox itself resets \epsf?size at each figure. - \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi - \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi - \epsfbox{#1.eps}% - \fi - % - \ifimagevmode \hss \egroup \bigbreak \fi % space after the image -\endgroup} - - -% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables, -% etc. We don't actually implement floating yet, we always include the -% float "here". But it seemed the best name for the future. -% -\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish} - -% There may be a space before second and/or third parameter; delete it. -\def\eatcommaspace#1, {#1,} - -% #1 is the optional FLOATTYPE, the text label for this float, typically -% "Figure", "Table", "Example", etc. Can't contain commas. If omitted, -% this float will not be numbered and cannot be referred to. -% -% #2 is the optional xref label. Also must be present for the float to -% be referable. -% -% #3 is the optional positioning argument; for now, it is ignored. It -% will somehow specify the positions allowed to float to (here, top, bottom). -% -% We keep a separate counter for each FLOATTYPE, which we reset at each -% chapter-level command. -\let\resetallfloatnos=\empty -% -\def\dofloat#1,#2,#3,#4\finish{% - \let\thiscaption=\empty - \let\thisshortcaption=\empty - % - % don't lose footnotes inside @float. - % - % BEWARE: when the floats start float, we have to issue warning whenever an - % insert appears inside a float which could possibly float. --kasal, 26may04 - % - \startsavinginserts - % - % We can't be used inside a paragraph. - \par - % - \vtop\bgroup - \def\floattype{#1}% - \def\floatlabel{#2}% - \def\floatloc{#3}% we do nothing with this yet. - % - \ifx\floattype\empty - \let\safefloattype=\empty - \else - {% - % the floattype might have accents or other special characters, - % but we need to use it in a control sequence name. - \indexnofonts - \turnoffactive - \xdef\safefloattype{\floattype}% - }% - \fi - % - % If label is given but no type, we handle that as the empty type. - \ifx\floatlabel\empty \else - % We want each FLOATTYPE to be numbered separately (Figure 1, - % Table 1, Figure 2, ...). (And if no label, no number.) - % - \expandafter\getfloatno\csname\safefloattype floatno\endcsname - \global\advance\floatno by 1 - % - {% - % This magic value for \thissection is output by \setref as the - % XREFLABEL-title value. \xrefX uses it to distinguish float - % labels (which have a completely different output format) from - % node and anchor labels. And \xrdef uses it to construct the - % lists of floats. - % - \edef\thissection{\floatmagic=\safefloattype}% - \setref{\floatlabel}{Yfloat}% - }% - \fi - % - % start with \parskip glue, I guess. - \vskip\parskip - % - % Don't suppress indentation if a float happens to start a section. - \restorefirstparagraphindent -} - -% we have these possibilities: -% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap -% @float Foo,lbl & no caption: Foo 1.1 -% @float Foo & @caption{Cap}: Foo: Cap -% @float Foo & no caption: Foo -% @float ,lbl & Caption{Cap}: 1.1: Cap -% @float ,lbl & no caption: 1.1 -% @float & @caption{Cap}: Cap -% @float & no caption: -% -\def\Efloat{% - \let\floatident = \empty - % - % In all cases, if we have a float type, it comes first. - \ifx\floattype\empty \else \def\floatident{\floattype}\fi - % - % If we have an xref label, the number comes next. - \ifx\floatlabel\empty \else - \ifx\floattype\empty \else % if also had float type, need tie first. - \appendtomacro\floatident{\tie}% - \fi - % the number. - \appendtomacro\floatident{\chaplevelprefix\the\floatno}% - \fi - % - % Start the printed caption with what we've constructed in - % \floatident, but keep it separate; we need \floatident again. - \let\captionline = \floatident - % - \ifx\thiscaption\empty \else - \ifx\floatident\empty \else - \appendtomacro\captionline{: }% had ident, so need a colon between - \fi - % - % caption text. - \appendtomacro\captionline{\scanexp\thiscaption}% - \fi - % - % If we have anything to print, print it, with space before. - % Eventually this needs to become an \insert. - \ifx\captionline\empty \else - \vskip.5\parskip - \captionline - % - % Space below caption. - \vskip\parskip - \fi - % - % If have an xref label, write the list of floats info. Do this - % after the caption, to avoid chance of it being a breakpoint. - \ifx\floatlabel\empty \else - % Write the text that goes in the lof to the aux file as - % \floatlabel-lof. Besides \floatident, we include the short - % caption if specified, else the full caption if specified, else nothing. - {% - \atdummies \turnoffactive \otherbackslash - % since we read the caption text in the macro world, where ^^M - % is turned into a normal character, we have to scan it back, so - % we don't write the literal three characters "^^M" into the aux file. - \scanexp{% - \xdef\noexpand\gtemp{% - \ifx\thisshortcaption\empty - \thiscaption - \else - \thisshortcaption - \fi - }% - }% - \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident - \ifx\gtemp\empty \else : \gtemp \fi}}% - }% - \fi - \egroup % end of \vtop - % - % place the captured inserts - % - % BEWARE: when the floats start float, we have to issue warning whenever an - % insert appears inside a float which could possibly float. --kasal, 26may04 - % - \checkinserts -} - -% Append the tokens #2 to the definition of macro #1, not expanding either. -% -\def\appendtomacro#1#2{% - \expandafter\def\expandafter#1\expandafter{#1#2}% -} - -% @caption, @shortcaption -% -\def\caption{\docaption\thiscaption} -\def\shortcaption{\docaption\thisshortcaption} -\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption} -\def\defcaption#1#2{\egroup \def#1{#2}} - -% The parameter is the control sequence identifying the counter we are -% going to use. Create it if it doesn't exist and assign it to \floatno. -\def\getfloatno#1{% - \ifx#1\relax - % Haven't seen this figure type before. - \csname newcount\endcsname #1% - % - % Remember to reset this floatno at the next chap. - \expandafter\gdef\expandafter\resetallfloatnos - \expandafter{\resetallfloatnos #1=0 }% - \fi - \let\floatno#1% -} - -% \setref calls this to get the XREFLABEL-snt value. We want an @xref -% to the FLOATLABEL to expand to "Figure 3.1". We call \setref when we -% first read the @float command. -% -\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}% - -% Magic string used for the XREFLABEL-title value, so \xrefX can -% distinguish floats from other xref types. -\def\floatmagic{!!float!!} - -% #1 is the control sequence we are passed; we expand into a conditional -% which is true if #1 represents a float ref. That is, the magic -% \thissection value which we \setref above. -% -\def\iffloat#1{\expandafter\doiffloat#1==\finish} -% -% #1 is (maybe) the \floatmagic string. If so, #2 will be the -% (safe) float type for this float. We set \iffloattype to #2. -% -\def\doiffloat#1=#2=#3\finish{% - \def\temp{#1}% - \def\iffloattype{#2}% - \ifx\temp\floatmagic -} - -% @listoffloats FLOATTYPE - print a list of floats like a table of contents. -% -\parseargdef\listoffloats{% - \def\floattype{#1}% floattype - {% - % the floattype might have accents or other special characters, - % but we need to use it in a control sequence name. - \indexnofonts - \turnoffactive - \xdef\safefloattype{\floattype}% - }% - % - % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE. - \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax - \ifhavexrefs - % if the user said @listoffloats foo but never @float foo. - \message{\linenumber No `\safefloattype' floats to list.}% - \fi - \else - \begingroup - \leftskip=\tocindent % indent these entries like a toc - \let\do=\listoffloatsdo - \csname floatlist\safefloattype\endcsname - \endgroup - \fi -} - -% This is called on each entry in a list of floats. We're passed the -% xref label, in the form LABEL-title, which is how we save it in the -% aux file. We strip off the -title and look up \XRLABEL-lof, which -% has the text we're supposed to typeset here. -% -% Figures without xref labels will not be included in the list (since -% they won't appear in the aux file). -% -\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish} -\def\listoffloatsdoentry#1-title\finish{{% - % Can't fully expand XR#1-lof because it can contain anything. Just - % pass the control sequence. On the other hand, XR#1-pg is just the - % page number, and we want to fully expand that so we can get a link - % in pdf output. - \toksA = \expandafter{\csname XR#1-lof\endcsname}% - % - % use the same \entry macro we use to generate the TOC and index. - \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}% - \writeentry -}} - -\message{localization,} -% and i18n. - -% @documentlanguage is usually given very early, just after -% @setfilename. If done too late, it may not override everything -% properly. Single argument is the language abbreviation. -% It would be nice if we could set up a hyphenation file here. -% -\parseargdef\documentlanguage{% - \tex % read txi-??.tex file in plain TeX. - % Read the file if it exists. - \openin 1 txi-#1.tex - \ifeof 1 - \errhelp = \nolanghelp - \errmessage{Cannot read language file txi-#1.tex}% - \else - \input txi-#1.tex - \fi - \closein 1 - \endgroup -} -\newhelp\nolanghelp{The given language definition file cannot be found or -is empty. Maybe you need to install it? In the current directory -should work if nowhere else does.} - - -% @documentencoding should change something in TeX eventually, most -% likely, but for now just recognize it. -\let\documentencoding = \comment - - -% Page size parameters. -% -\newdimen\defaultparindent \defaultparindent = 15pt - -\chapheadingskip = 15pt plus 4pt minus 2pt -\secheadingskip = 12pt plus 3pt minus 2pt -\subsecheadingskip = 9pt plus 2pt minus 2pt - -% Prevent underfull vbox error messages. -\vbadness = 10000 - -% Don't be so finicky about underfull hboxes, either. -\hbadness = 2000 - -% Following George Bush, just get rid of widows and orphans. -\widowpenalty=10000 -\clubpenalty=10000 - -% Use TeX 3.0's \emergencystretch to help line breaking, but if we're -% using an old version of TeX, don't do anything. We want the amount of -% stretch added to depend on the line length, hence the dependence on -% \hsize. We call this whenever the paper size is set. -% -\def\setemergencystretch{% - \ifx\emergencystretch\thisisundefined - % Allow us to assign to \emergencystretch anyway. - \def\emergencystretch{\dimen0}% - \else - \emergencystretch = .15\hsize - \fi -} - -% Parameters in order: 1) textheight; 2) textwidth; 3) voffset; -% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8) -% physical page width. -% -% We also call \setleading{\textleading}, so the caller should define -% \textleading. The caller should also set \parskip. -% -\def\internalpagesizes#1#2#3#4#5#6#7#8{% - \voffset = #3\relax - \topskip = #6\relax - \splittopskip = \topskip - % - \vsize = #1\relax - \advance\vsize by \topskip - \outervsize = \vsize - \advance\outervsize by 2\topandbottommargin - \pageheight = \vsize - % - \hsize = #2\relax - \outerhsize = \hsize - \advance\outerhsize by 0.5in - \pagewidth = \hsize - % - \normaloffset = #4\relax - \bindingoffset = #5\relax - % - \ifpdf - \pdfpageheight #7\relax - \pdfpagewidth #8\relax - \fi - % - \setleading{\textleading} - % - \parindent = \defaultparindent - \setemergencystretch -} - -% @letterpaper (the default). -\def\letterpaper{{\globaldefs = 1 - \parskip = 3pt plus 2pt minus 1pt - \textleading = 13.2pt - % - % If page is nothing but text, make it come out even. - \internalpagesizes{46\baselineskip}{6in}% - {\voffset}{.25in}% - {\bindingoffset}{36pt}% - {11in}{8.5in}% -}} - -% Use @smallbook to reset parameters for 7x9.5 (or so) format. -\def\smallbook{{\globaldefs = 1 - \parskip = 2pt plus 1pt - \textleading = 12pt - % - \internalpagesizes{7.5in}{5in}% - {\voffset}{.25in}% - {\bindingoffset}{16pt}% - {9.25in}{7in}% - % - \lispnarrowing = 0.3in - \tolerance = 700 - \hfuzz = 1pt - \contentsrightmargin = 0pt - \defbodyindent = .5cm -}} - -% Use @afourpaper to print on European A4 paper. -\def\afourpaper{{\globaldefs = 1 - \parskip = 3pt plus 2pt minus 1pt - \textleading = 13.2pt - % - % Double-side printing via postscript on Laserjet 4050 - % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm. - % To change the settings for a different printer or situation, adjust - % \normaloffset until the front-side and back-side texts align. Then - % do the same for \bindingoffset. You can set these for testing in - % your texinfo source file like this: - % @tex - % \global\normaloffset = -6mm - % \global\bindingoffset = 10mm - % @end tex - \internalpagesizes{51\baselineskip}{160mm} - {\voffset}{\hoffset}% - {\bindingoffset}{44pt}% - {297mm}{210mm}% - % - \tolerance = 700 - \hfuzz = 1pt - \contentsrightmargin = 0pt - \defbodyindent = 5mm -}} - -% Use @afivepaper to print on European A5 paper. -% From romildo@urano.iceb.ufop.br, 2 July 2000. -% He also recommends making @example and @lisp be small. -\def\afivepaper{{\globaldefs = 1 - \parskip = 2pt plus 1pt minus 0.1pt - \textleading = 12.5pt - % - \internalpagesizes{160mm}{120mm}% - {\voffset}{\hoffset}% - {\bindingoffset}{8pt}% - {210mm}{148mm}% - % - \lispnarrowing = 0.2in - \tolerance = 800 - \hfuzz = 1.2pt - \contentsrightmargin = 0pt - \defbodyindent = 2mm - \tableindent = 12mm -}} - -% A specific text layout, 24x15cm overall, intended for A4 paper. -\def\afourlatex{{\globaldefs = 1 - \afourpaper - \internalpagesizes{237mm}{150mm}% - {\voffset}{4.6mm}% - {\bindingoffset}{7mm}% - {297mm}{210mm}% - % - % Must explicitly reset to 0 because we call \afourpaper. - \globaldefs = 0 -}} - -% Use @afourwide to print on A4 paper in landscape format. -\def\afourwide{{\globaldefs = 1 - \afourpaper - \internalpagesizes{241mm}{165mm}% - {\voffset}{-2.95mm}% - {\bindingoffset}{7mm}% - {297mm}{210mm}% - \globaldefs = 0 -}} - -% @pagesizes TEXTHEIGHT[,TEXTWIDTH] -% Perhaps we should allow setting the margins, \topskip, \parskip, -% and/or leading, also. Or perhaps we should compute them somehow. -% -\parseargdef\pagesizes{\pagesizesyyy #1,,\finish} -\def\pagesizesyyy#1,#2,#3\finish{{% - \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi - \globaldefs = 1 - % - \parskip = 3pt plus 2pt minus 1pt - \setleading{\textleading}% - % - \dimen0 = #1 - \advance\dimen0 by \voffset - % - \dimen2 = \hsize - \advance\dimen2 by \normaloffset - % - \internalpagesizes{#1}{\hsize}% - {\voffset}{\normaloffset}% - {\bindingoffset}{44pt}% - {\dimen0}{\dimen2}% -}} - -% Set default to letter. -% -\letterpaper - - -\message{and turning on texinfo input format.} - -% Define macros to output various characters with catcode for normal text. -\catcode`\"=\other -\catcode`\~=\other -\catcode`\^=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode`\+=\other -\catcode`\$=\other -\def\normaldoublequote{"} -\def\normaltilde{~} -\def\normalcaret{^} -\def\normalunderscore{_} -\def\normalverticalbar{|} -\def\normalless{<} -\def\normalgreater{>} -\def\normalplus{+} -\def\normaldollar{$}%$ font-lock fix - -% This macro is used to make a character print one way in \tt -% (where it can probably be output as-is), and another way in other fonts, -% where something hairier probably needs to be done. -% -% #1 is what to print if we are indeed using \tt; #2 is what to print -% otherwise. Since all the Computer Modern typewriter fonts have zero -% interword stretch (and shrink), and it is reasonable to expect all -% typewriter fonts to have this, we can check that font parameter. -% -\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi} - -% Same as above, but check for italic font. Actually this also catches -% non-italic slanted fonts since it is impossible to distinguish them from -% italic fonts. But since this is only used by $ and it uses \sl anyway -% this is not a problem. -\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi} - -% Turn off all special characters except @ -% (and those which the user can use as if they were ordinary). -% Most of these we simply print from the \tt font, but for some, we can -% use math or other variants that look better in normal text. - -\catcode`\"=\active -\def\activedoublequote{{\tt\char34}} -\let"=\activedoublequote -\catcode`\~=\active -\def~{{\tt\char126}} -\chardef\hat=`\^ -\catcode`\^=\active -\def^{{\tt \hat}} - -\catcode`\_=\active -\def_{\ifusingtt\normalunderscore\_} -% Subroutine for the previous macro. -\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em } - -\catcode`\|=\active -\def|{{\tt\char124}} -\chardef \less=`\< -\catcode`\<=\active -\def<{{\tt \less}} -\chardef \gtr=`\> -\catcode`\>=\active -\def>{{\tt \gtr}} -\catcode`\+=\active -\def+{{\tt \char 43}} -\catcode`\$=\active -\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix - -% If a .fmt file is being used, characters that might appear in a file -% name cannot be active until we have parsed the command line. -% So turn them off again, and have \everyjob (or @setfilename) turn them on. -% \otherifyactive is called near the end of this file. -\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} - -\catcode`\@=0 - -% \backslashcurfont outputs one backslash character in current font, -% as in \char`\\. -\global\chardef\backslashcurfont=`\\ -\global\let\rawbackslashxx=\backslashcurfont % let existing .??s files work - -% \rawbackslash defines an active \ to do \backslashcurfont. -% \otherbackslash defines an active \ to be a literal `\' character with -% catcode other. -{\catcode`\\=\active - @gdef@rawbackslash{@let\=@backslashcurfont} - @gdef@otherbackslash{@let\=@realbackslash} -} - -% \realbackslash is an actual character `\' with catcode other. -{\catcode`\\=\other @gdef@realbackslash{\}} - -% \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\backslashcurfont}} - -\catcode`\\=\active - -% Used sometimes to turn off (effectively) the active characters -% even after parsing them. -@def@turnoffactive{% - @let"=@normaldoublequote - @let\=@realbackslash - @let~=@normaltilde - @let^=@normalcaret - @let_=@normalunderscore - @let|=@normalverticalbar - @let<=@normalless - @let>=@normalgreater - @let+=@normalplus - @let$=@normaldollar %$ font-lock fix - @unsepspaces -} - -% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. (Thus, \ is not expandable when this is in -% effect.) -% -@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash} - -% Make _ and + \other characters, temporarily. -% This is canceled by @fixbackslash. -@otherifyactive - -% If a .fmt file is being used, we don't want the `\input texinfo' to show up. -% That is what \eatinput is for; after that, the `\' should revert to printing -% a backslash. -% -@gdef@eatinput input texinfo{@fixbackslash} -@global@let\ = @eatinput - -% On the other hand, perhaps the file did not have a `\input texinfo'. Then -% the first `\{ in the file would cause an error. This macro tries to fix -% that, assuming it is called before the first `\' could plausibly occur. -% Also back turn on active characters that might appear in the input -% file name, in case not using a pre-dumped format. -% -@gdef@fixbackslash{% - @ifx\@eatinput @let\ = @normalbackslash @fi - @catcode`+=@active - @catcode`@_=@active -} - -% Say @foo, not \foo, in error messages. -@escapechar = `@@ - -% These look ok in all fonts, so just make them not special. -@catcode`@& = @other -@catcode`@# = @other -@catcode`@% = @other - - -@c Local variables: -@c eval: (add-hook 'write-file-hooks 'time-stamp) -@c page-delimiter: "^\\\\message" -@c time-stamp-start: "def\\\\texinfoversion{" -@c time-stamp-format: "%:y-%02m-%02d.%02H" -@c time-stamp-end: "}" -@c End: - -@c vim:sw=2: - -@ignore - arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 -@end ignore diff --git a/grub/Makefile.in b/grub/Makefile.in deleted file mode 100644 index 136c38fd1..000000000 --- a/grub/Makefile.in +++ /dev/null @@ -1,445 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -SOURCES = $(grub_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -sbin_PROGRAMS = grub$(EXEEXT) -subdir = grub -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -am__installdirs = "$(DESTDIR)$(sbindir)" -sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -PROGRAMS = $(sbin_PROGRAMS) -am_grub_OBJECTS = main.$(OBJEXT) asmstub.$(OBJEXT) -grub_OBJECTS = $(am_grub_OBJECTS) -am__DEPENDENCIES_1 = -grub_DEPENDENCIES = ../stage2/libgrub.a ../lib/libcommon.a \ - $(am__DEPENDENCIES_1) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(grub_SOURCES) -DIST_SOURCES = $(grub_SOURCES) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -@SERIAL_SPEED_SIMULATION_FALSE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1 -@SERIAL_SPEED_SIMULATION_TRUE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1 -DSIMULATE_SLOWNESS_OF_SERIAL=1 -AM_CPPFLAGS = -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \ - -DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \ - -DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \ - -DUSE_MD5_PASSWORDS=1 -DSUPPORT_HERCULES=1 \ - $(SERIAL_FLAGS) -I$(top_srcdir)/stage2 \ - -I$(top_srcdir)/stage1 -I$(top_srcdir)/lib - -AM_CFLAGS = $(GRUB_CFLAGS) -grub_SOURCES = main.c asmstub.c -grub_LDADD = ../stage2/libgrub.a ../lib/libcommon.a $(GRUB_LIBS) -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu grub/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu grub/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -install-sbinPROGRAMS: $(sbin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)" - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ - else :; fi; \ - done - -uninstall-sbinPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(sbin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done - -clean-sbinPROGRAMS: - -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) -grub$(EXEEXT): $(grub_OBJECTS) $(grub_DEPENDENCIES) - @rm -f grub$(EXEEXT) - $(LINK) $(grub_LDFLAGS) $(grub_OBJECTS) $(grub_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/asmstub.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` -uninstall-info-am: - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: - for dir in "$(DESTDIR)$(sbindir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-sbinPROGRAMS mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-exec-am: install-sbinPROGRAMS - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-info-am uninstall-sbinPROGRAMS - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-sbinPROGRAMS ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-exec install-exec-am install-info \ - install-info-am install-man install-sbinPROGRAMS install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-info-am uninstall-sbinPROGRAMS - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/install-sh b/install-sh deleted file mode 100644 index 6ebe46de6..000000000 --- a/install-sh +++ /dev/null @@ -1,323 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2004-12-17.09 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -chmodcmd="$chmodprog 0755" -chowncmd= -chgrpcmd= -stripcmd= -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src= -dst= -dir_arg= -dstarg= -no_target_directory= - -usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: --c (ignored) --d create directories instead of installing files. --g GROUP $chgrpprog installed files to GROUP. --m MODE $chmodprog installed files to MODE. --o USER $chownprog installed files to USER. --s $stripprog installed files. --t DIRECTORY install into DIRECTORY. --T report an error if DSTFILE is a directory. ---help display this help and exit. ---version display version info and exit. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG -" - -while test -n "$1"; do - case $1 in - -c) shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - --help) echo "$usage"; exit 0;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -s) stripcmd=$stripprog - shift - continue;; - - -t) dstarg=$2 - shift - shift - continue;; - - -T) no_target_directory=true - shift - continue;; - - --version) echo "$0 $scriptversion"; exit 0;; - - *) # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - test -n "$dir_arg$dstarg" && break - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dstarg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dstarg" - shift # fnord - fi - shift # arg - dstarg=$arg - done - break;; - esac -done - -if test -z "$1"; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src ;; - esac - - if test -n "$dir_arg"; then - dst=$src - src= - - if test -d "$dst"; then - mkdircmd=: - chmodcmd= - else - mkdircmd=$mkdirprog - fi - else - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dstarg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dstarg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dstarg: Is a directory" >&2 - exit 1 - fi - dst=$dst/`basename "$src"` - fi - fi - - # This sed command emulates the dirname command. - dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` - - # Make sure that the destination directory exists. - - # Skip lots of stat calls in the usual case. - if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - shift - IFS=$oIFS - - pathcomp= - - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 - shift - if test ! -d "$pathcomp"; then - $mkdirprog "$pathcomp" - # mkdir can fail with a `File exist' error in case several - # install-sh are creating the directory concurrently. This - # is OK. - test -d "$pathcomp" || exit - fi - pathcomp=$pathcomp/ - done - fi - - if test -n "$dir_arg"; then - $doit $mkdircmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - - else - dstfile=`basename "$dst"` - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - trap '(exit $?); exit' 1 2 13 15 - - # Copy the file name to the temp name. - $doit $cpprog "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now rename the file to the real destination. - { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ - || { - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ - || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit 1 - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" - } - } - fi || { (exit 1); exit 1; } -done - -# The final little trick to "correctly" pass the exit status to the exit trap. -{ - (exit 0); exit 0 -} - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/lib/Makefile.in b/lib/Makefile.in deleted file mode 100644 index 3dae206c2..000000000 --- a/lib/Makefile.in +++ /dev/null @@ -1,416 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -SOURCES = $(libcommon_a_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = lib -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LIBRARIES = $(noinst_LIBRARIES) -AR = ar -ARFLAGS = cru -libcommon_a_AR = $(AR) $(ARFLAGS) -libcommon_a_LIBADD = -am_libcommon_a_OBJECTS = getopt.$(OBJEXT) getopt1.$(OBJEXT) \ - device.$(OBJEXT) -libcommon_a_OBJECTS = $(am_libcommon_a_OBJECTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(libcommon_a_SOURCES) -DIST_SOURCES = $(libcommon_a_SOURCES) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -noinst_LIBRARIES = libcommon.a -AM_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/stage2 \ - -I$(top_srcdir)/stage1 - -libcommon_a_SOURCES = getopt.c getopt1.c getopt.h device.c device.h -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu lib/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -clean-noinstLIBRARIES: - -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -libcommon.a: $(libcommon_a_OBJECTS) $(libcommon_a_DEPENDENCIES) - -rm -f libcommon.a - $(libcommon_a_AR) libcommon.a $(libcommon_a_OBJECTS) $(libcommon_a_LIBADD) - $(RANLIB) libcommon.a - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/device.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` -uninstall-info-am: - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-exec-am: - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-info-am - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-noinstLIBRARIES ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-exec install-exec-am install-info \ - install-info-am install-man install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-info-am - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/missing b/missing deleted file mode 100644 index 64b5f901d..000000000 --- a/missing +++ /dev/null @@ -1,353 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2004-09-07.08 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA -# 02111-1307, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case "$1" in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to ." - exit 0 - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit 0 - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case "$1" in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case "$f" in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if [ ! -f y.tab.h ]; then - echo >y.tab.h - fi - if [ ! -f y.tab.c ]; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if [ ! -f lex.yy.c ]; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` - fi - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/mkinstalldirs b/mkinstalldirs deleted file mode 100644 index 6fbe5e117..000000000 --- a/mkinstalldirs +++ /dev/null @@ -1,150 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy - -scriptversion=2004-02-15.20 - -# Original author: Noah Friedman -# Created: 1993-05-16 -# Public domain. -# -# This file is maintained in Automake, please report -# bugs to or send patches to -# . - -errstatus=0 -dirmode="" - -usage="\ -Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... - -Create each directory DIR (with mode MODE, if specified), including all -leading file name components. - -Report bugs to ." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" - exit 0 - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --version) - echo "$0 $scriptversion" - exit 0 - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and -# mkdir -p a/c at the same time, both will detect that a is missing, -# one will create a, then the other will try to create a and die with -# a "File exists" error. This is a problem when calling mkinstalldirs -# from a parallel make. We use --version in the probe to restrict -# ourselves to GNU mkdir, which is thread-safe. -case $dirmode in - '') - if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - else - # On NextStep and OpenStep, the `mkdir' command does not - # recognize any option. It will interpret all options as - # directories to create, and then abort because `.' already - # exists. - test -d ./-p && rmdir ./-p - test -d ./--version && rmdir ./--version - fi - ;; - *) - if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && - test ! -d ./--version; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - else - # Clean up after NextStep and OpenStep mkdir. - for d in ./-m ./-p ./--version "./$dirmode"; - do - test -d $d && rmdir $d - done - fi - ;; -esac - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/netboot/Makefile.in b/netboot/Makefile.in deleted file mode 100644 index 75ac29971..000000000 --- a/netboot/Makefile.in +++ /dev/null @@ -1,1091 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = netboot -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LIBRARIES = $(noinst_LIBRARIES) -AR = ar -ARFLAGS = cru -libdrivers_a_AR = $(AR) $(ARFLAGS) -am_libdrivers_a_OBJECTS = libdrivers_a-config.$(OBJEXT) \ - libdrivers_a-fsys_tftp.$(OBJEXT) libdrivers_a-main.$(OBJEXT) \ - libdrivers_a-misc.$(OBJEXT) libdrivers_a-pci.$(OBJEXT) \ - libdrivers_a-timer.$(OBJEXT) -libdrivers_a_OBJECTS = $(am_libdrivers_a_OBJECTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES) -DIST_SOURCES = $(libdrivers_a_SOURCES) $(EXTRA_libdrivers_a_SOURCES) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ - -# For and . -INCLUDES = -I$(top_srcdir)/stage2 -I$(top_srcdir)/stage1 -@NETBOOT_SUPPORT_FALSE@LIBDRIVERS = - -# Don't build the netboot support by default. -@NETBOOT_SUPPORT_TRUE@LIBDRIVERS = libdrivers.a -noinst_LIBRARIES = $(LIBDRIVERS) -libdrivers_a_SOURCES = cards.h config.c etherboot.h \ - fsys_tftp.c linux-asm-io.h linux-asm-string.h \ - main.c misc.c nic.h osdep.h pci.c pci.h timer.c timer.h - -EXTRA_libdrivers_a_SOURCES = 3c509.c 3c509.h 3c595.c 3c595.h 3c90x.c \ - cs89x0.c cs89x0.h davicom.c depca.c eepro.c eepro100.c \ - epic100.c epic100.h fa311.c i82586.c lance.c natsemi.c \ - ni5010.c ns8390.c ns8390.h otulip.c otulip.h rtl8139.c \ - sis900.c sis900.h sk_g16.c sk_g16.h smc9000.c smc9000.h \ - tiara.c tlan.c tulip.c via-rhine.c w89c840.c - -libdrivers_a_CFLAGS = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - -DFSYS_TFTP=1 $(NET_CFLAGS) $(NET_EXTRAFLAGS) - -# Filled by configure. -libdrivers_a_LIBADD = @NETBOOT_DRIVERS@ -libdrivers_a_DEPENDENCIES = $(libdrivers_a_LIBADD) -EXTRA_DIST = README.netboot 3c90x.txt cs89x0.txt sis900.txt tulip.txt - -# These below are several special rules for the device drivers. -# We cannot use a simple rule for them... - -# What objects are derived from a driver? -3c509_drivers = 3c509.o 3c529.o -3c595_drivers = 3c595.o -3c90x_drivers = 3c90x.o -cs89x0_drivers = cs89x0.o -davicom_drivers = davicom.o -depca_drivers = depca.o -eepro_drivers = eepro.o -eepro100_drivers = eepro100.o -epic100_drivers = epic100.o -#fa311_drivers = fa311.o -i82586_drivers = 3c507.o exos205.o ni5210.o -lance_drivers = lance.o ne2100.o ni6510.o -natsemi_drivers = natsemi.o -ni5010_drivers = ni5010.o -ns8390_drivers = 3c503.o ne.o ns8390.o wd.o -otulip_drivers = otulip.o -rtl8139_drivers = rtl8139.o -sis900_drivers = sis900.o -sk_g16_drivers = sk_g16.o -smc9000_drivers = smc9000.o -tiara_drivers = tiara.o -#tlan_drivers = tlan.o -tulip_drivers = tulip.o -via_rhine_drivers = via_rhine.o -w89c840_drivers = w89c840.o - -# Per-object flags. -3c509_o_CFLAGS = -DINCLUDE_3C509=1 -3c529_o_CFLAGS = -DINCLUDE_3C529=1 -3c595_o_CFLAGS = -DINCLUDE_3C595=1 -3c90x_o_CFLAGS = -DINCLUDE_3C90X=1 -cs89x0_o_CFLAGS = -DINCLUDE_CS89X0=1 -davicom_o_CFLAGS = -DINCLUDE_DAVICOM=1 -depca_o_CFLAGS = -DINCLUDE_DEPCA=1 -eepro_o_CFLAGS = -DINCLUDE_EEPRO=1 -eepro100_o_CFLAGS = -DINCLUDE_EEPRO100=1 -epic100_o_CFLAGS = -DINCLUDE_EPIC100=1 -#fa311_o_CFLAGS = -DINCLUDE_FA311=1 -3c507_o_CFLAGS = -DINCLUDE_3C507=1 -exos205_o_CFLAGS = -DINCLUDE_EXOS205=1 -ni5210_o_CFLAGS = -DINCLUDE_NI5210=1 -lance_o_CFLAGS = -DINCLUDE_LANCE=1 -ne2100_o_CFLAGS = -DINCLUDE_NE2100=1 -ni6510_o_CFLAGS = -DINCLUDE_NI6510=1 -natsemi_o_CFLAGS = -DINCLUDE_NATSEMI=1 -ni5010_o_CFLAGS = -DINCLUDE_NI5010=1 -3c503_o_CFLAGS = -DINCLUDE_3C503=1 -ne_o_CFLAGS = -DINCLUDE_NE=1 -ns8390_o_CFLAGS = -DINCLUDE_NS8390=1 -wd_o_CFLAGS = -DINCLUDE_WD=1 -otulip_o_CFLAGS = -DINCLUDE_OTULIP=1 -rtl8139_o_CFLAGS = -DINCLUDE_RTL8139=1 -sis900_o_CFLAGS = -DINCLUDE_SIS900=1 -sk_g16_o_CFLAGS = -DINCLUDE_SK_G16=1 -smc9000_o_CFLAGS = -DINCLUDE_SMC9000=1 -tiara_o_CFLAGS = -DINCLUDE_TIARA=1 -#tlan_o_CFLAGS = -DINCLUDE_TLAN=1 -tulip_o_CFLAGS = -DINCLUDE_TULIP=1 -via_rhine_o_CFLAGS = -DINCLUDE_VIA_RHINE=1 -w89c840_o_CFLAGS = -DINCLUDE_W89C840=1 -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu netboot/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu netboot/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -clean-noinstLIBRARIES: - -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -libdrivers.a: $(libdrivers_a_OBJECTS) $(libdrivers_a_DEPENDENCIES) - -rm -f libdrivers.a - $(libdrivers_a_AR) libdrivers.a $(libdrivers_a_OBJECTS) $(libdrivers_a_LIBADD) - $(RANLIB) libdrivers.a - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c509.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c595.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-3c90x.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-config.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-cs89x0.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-davicom.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-depca.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-eepro.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-eepro100.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-epic100.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-fa311.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-fsys_tftp.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-i82586.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-lance.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-main.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-misc.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-natsemi.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ni5010.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-ns8390.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-otulip.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-pci.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-rtl8139.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-sis900.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-sk_g16.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-smc9000.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tiara.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-timer.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tlan.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-tulip.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-via-rhine.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libdrivers_a-w89c840.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -libdrivers_a-config.o: config.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-config.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-config.Tpo" -c -o libdrivers_a-config.o `test -f 'config.c' || echo '$(srcdir)/'`config.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-config.Tpo" "$(DEPDIR)/libdrivers_a-config.Po"; else rm -f "$(DEPDIR)/libdrivers_a-config.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='config.c' object='libdrivers_a-config.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-config.o `test -f 'config.c' || echo '$(srcdir)/'`config.c - -libdrivers_a-config.obj: config.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-config.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-config.Tpo" -c -o libdrivers_a-config.obj `if test -f 'config.c'; then $(CYGPATH_W) 'config.c'; else $(CYGPATH_W) '$(srcdir)/config.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-config.Tpo" "$(DEPDIR)/libdrivers_a-config.Po"; else rm -f "$(DEPDIR)/libdrivers_a-config.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='config.c' object='libdrivers_a-config.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-config.obj `if test -f 'config.c'; then $(CYGPATH_W) 'config.c'; else $(CYGPATH_W) '$(srcdir)/config.c'; fi` - -libdrivers_a-fsys_tftp.o: fsys_tftp.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fsys_tftp.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" -c -o libdrivers_a-fsys_tftp.o `test -f 'fsys_tftp.c' || echo '$(srcdir)/'`fsys_tftp.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" "$(DEPDIR)/libdrivers_a-fsys_tftp.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_tftp.c' object='libdrivers_a-fsys_tftp.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fsys_tftp.o `test -f 'fsys_tftp.c' || echo '$(srcdir)/'`fsys_tftp.c - -libdrivers_a-fsys_tftp.obj: fsys_tftp.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fsys_tftp.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" -c -o libdrivers_a-fsys_tftp.obj `if test -f 'fsys_tftp.c'; then $(CYGPATH_W) 'fsys_tftp.c'; else $(CYGPATH_W) '$(srcdir)/fsys_tftp.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo" "$(DEPDIR)/libdrivers_a-fsys_tftp.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fsys_tftp.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_tftp.c' object='libdrivers_a-fsys_tftp.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fsys_tftp.obj `if test -f 'fsys_tftp.c'; then $(CYGPATH_W) 'fsys_tftp.c'; else $(CYGPATH_W) '$(srcdir)/fsys_tftp.c'; fi` - -libdrivers_a-main.o: main.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-main.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-main.Tpo" -c -o libdrivers_a-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-main.Tpo" "$(DEPDIR)/libdrivers_a-main.Po"; else rm -f "$(DEPDIR)/libdrivers_a-main.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='libdrivers_a-main.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-main.o `test -f 'main.c' || echo '$(srcdir)/'`main.c - -libdrivers_a-main.obj: main.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-main.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-main.Tpo" -c -o libdrivers_a-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-main.Tpo" "$(DEPDIR)/libdrivers_a-main.Po"; else rm -f "$(DEPDIR)/libdrivers_a-main.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='main.c' object='libdrivers_a-main.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-main.obj `if test -f 'main.c'; then $(CYGPATH_W) 'main.c'; else $(CYGPATH_W) '$(srcdir)/main.c'; fi` - -libdrivers_a-misc.o: misc.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-misc.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-misc.Tpo" -c -o libdrivers_a-misc.o `test -f 'misc.c' || echo '$(srcdir)/'`misc.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-misc.Tpo" "$(DEPDIR)/libdrivers_a-misc.Po"; else rm -f "$(DEPDIR)/libdrivers_a-misc.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='misc.c' object='libdrivers_a-misc.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-misc.o `test -f 'misc.c' || echo '$(srcdir)/'`misc.c - -libdrivers_a-misc.obj: misc.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-misc.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-misc.Tpo" -c -o libdrivers_a-misc.obj `if test -f 'misc.c'; then $(CYGPATH_W) 'misc.c'; else $(CYGPATH_W) '$(srcdir)/misc.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-misc.Tpo" "$(DEPDIR)/libdrivers_a-misc.Po"; else rm -f "$(DEPDIR)/libdrivers_a-misc.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='misc.c' object='libdrivers_a-misc.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-misc.obj `if test -f 'misc.c'; then $(CYGPATH_W) 'misc.c'; else $(CYGPATH_W) '$(srcdir)/misc.c'; fi` - -libdrivers_a-pci.o: pci.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci.Tpo" -c -o libdrivers_a-pci.o `test -f 'pci.c' || echo '$(srcdir)/'`pci.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-pci.Tpo" "$(DEPDIR)/libdrivers_a-pci.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pci.c' object='libdrivers_a-pci.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci.o `test -f 'pci.c' || echo '$(srcdir)/'`pci.c - -libdrivers_a-pci.obj: pci.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-pci.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-pci.Tpo" -c -o libdrivers_a-pci.obj `if test -f 'pci.c'; then $(CYGPATH_W) 'pci.c'; else $(CYGPATH_W) '$(srcdir)/pci.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-pci.Tpo" "$(DEPDIR)/libdrivers_a-pci.Po"; else rm -f "$(DEPDIR)/libdrivers_a-pci.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pci.c' object='libdrivers_a-pci.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-pci.obj `if test -f 'pci.c'; then $(CYGPATH_W) 'pci.c'; else $(CYGPATH_W) '$(srcdir)/pci.c'; fi` - -libdrivers_a-timer.o: timer.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-timer.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-timer.Tpo" -c -o libdrivers_a-timer.o `test -f 'timer.c' || echo '$(srcdir)/'`timer.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-timer.Tpo" "$(DEPDIR)/libdrivers_a-timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-timer.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='timer.c' object='libdrivers_a-timer.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-timer.o `test -f 'timer.c' || echo '$(srcdir)/'`timer.c - -libdrivers_a-timer.obj: timer.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-timer.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-timer.Tpo" -c -o libdrivers_a-timer.obj `if test -f 'timer.c'; then $(CYGPATH_W) 'timer.c'; else $(CYGPATH_W) '$(srcdir)/timer.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-timer.Tpo" "$(DEPDIR)/libdrivers_a-timer.Po"; else rm -f "$(DEPDIR)/libdrivers_a-timer.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='timer.c' object='libdrivers_a-timer.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-timer.obj `if test -f 'timer.c'; then $(CYGPATH_W) 'timer.c'; else $(CYGPATH_W) '$(srcdir)/timer.c'; fi` - -libdrivers_a-3c509.o: 3c509.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c509.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c509.Tpo" -c -o libdrivers_a-3c509.o `test -f '3c509.c' || echo '$(srcdir)/'`3c509.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c509.Tpo" "$(DEPDIR)/libdrivers_a-3c509.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c509.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c509.c' object='libdrivers_a-3c509.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c509.o `test -f '3c509.c' || echo '$(srcdir)/'`3c509.c - -libdrivers_a-3c509.obj: 3c509.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c509.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c509.Tpo" -c -o libdrivers_a-3c509.obj `if test -f '3c509.c'; then $(CYGPATH_W) '3c509.c'; else $(CYGPATH_W) '$(srcdir)/3c509.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c509.Tpo" "$(DEPDIR)/libdrivers_a-3c509.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c509.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c509.c' object='libdrivers_a-3c509.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c509.obj `if test -f '3c509.c'; then $(CYGPATH_W) '3c509.c'; else $(CYGPATH_W) '$(srcdir)/3c509.c'; fi` - -libdrivers_a-3c595.o: 3c595.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c595.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c595.Tpo" -c -o libdrivers_a-3c595.o `test -f '3c595.c' || echo '$(srcdir)/'`3c595.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c595.Tpo" "$(DEPDIR)/libdrivers_a-3c595.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c595.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c595.c' object='libdrivers_a-3c595.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c595.o `test -f '3c595.c' || echo '$(srcdir)/'`3c595.c - -libdrivers_a-3c595.obj: 3c595.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c595.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c595.Tpo" -c -o libdrivers_a-3c595.obj `if test -f '3c595.c'; then $(CYGPATH_W) '3c595.c'; else $(CYGPATH_W) '$(srcdir)/3c595.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c595.Tpo" "$(DEPDIR)/libdrivers_a-3c595.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c595.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c595.c' object='libdrivers_a-3c595.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c595.obj `if test -f '3c595.c'; then $(CYGPATH_W) '3c595.c'; else $(CYGPATH_W) '$(srcdir)/3c595.c'; fi` - -libdrivers_a-3c90x.o: 3c90x.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c90x.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c90x.Tpo" -c -o libdrivers_a-3c90x.o `test -f '3c90x.c' || echo '$(srcdir)/'`3c90x.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo" "$(DEPDIR)/libdrivers_a-3c90x.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c90x.c' object='libdrivers_a-3c90x.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c90x.o `test -f '3c90x.c' || echo '$(srcdir)/'`3c90x.c - -libdrivers_a-3c90x.obj: 3c90x.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-3c90x.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-3c90x.Tpo" -c -o libdrivers_a-3c90x.obj `if test -f '3c90x.c'; then $(CYGPATH_W) '3c90x.c'; else $(CYGPATH_W) '$(srcdir)/3c90x.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo" "$(DEPDIR)/libdrivers_a-3c90x.Po"; else rm -f "$(DEPDIR)/libdrivers_a-3c90x.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='3c90x.c' object='libdrivers_a-3c90x.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-3c90x.obj `if test -f '3c90x.c'; then $(CYGPATH_W) '3c90x.c'; else $(CYGPATH_W) '$(srcdir)/3c90x.c'; fi` - -libdrivers_a-cs89x0.o: cs89x0.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-cs89x0.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" -c -o libdrivers_a-cs89x0.o `test -f 'cs89x0.c' || echo '$(srcdir)/'`cs89x0.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" "$(DEPDIR)/libdrivers_a-cs89x0.Po"; else rm -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cs89x0.c' object='libdrivers_a-cs89x0.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-cs89x0.o `test -f 'cs89x0.c' || echo '$(srcdir)/'`cs89x0.c - -libdrivers_a-cs89x0.obj: cs89x0.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-cs89x0.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" -c -o libdrivers_a-cs89x0.obj `if test -f 'cs89x0.c'; then $(CYGPATH_W) 'cs89x0.c'; else $(CYGPATH_W) '$(srcdir)/cs89x0.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo" "$(DEPDIR)/libdrivers_a-cs89x0.Po"; else rm -f "$(DEPDIR)/libdrivers_a-cs89x0.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cs89x0.c' object='libdrivers_a-cs89x0.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-cs89x0.obj `if test -f 'cs89x0.c'; then $(CYGPATH_W) 'cs89x0.c'; else $(CYGPATH_W) '$(srcdir)/cs89x0.c'; fi` - -libdrivers_a-davicom.o: davicom.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-davicom.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-davicom.Tpo" -c -o libdrivers_a-davicom.o `test -f 'davicom.c' || echo '$(srcdir)/'`davicom.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-davicom.Tpo" "$(DEPDIR)/libdrivers_a-davicom.Po"; else rm -f "$(DEPDIR)/libdrivers_a-davicom.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='davicom.c' object='libdrivers_a-davicom.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-davicom.o `test -f 'davicom.c' || echo '$(srcdir)/'`davicom.c - -libdrivers_a-davicom.obj: davicom.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-davicom.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-davicom.Tpo" -c -o libdrivers_a-davicom.obj `if test -f 'davicom.c'; then $(CYGPATH_W) 'davicom.c'; else $(CYGPATH_W) '$(srcdir)/davicom.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-davicom.Tpo" "$(DEPDIR)/libdrivers_a-davicom.Po"; else rm -f "$(DEPDIR)/libdrivers_a-davicom.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='davicom.c' object='libdrivers_a-davicom.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-davicom.obj `if test -f 'davicom.c'; then $(CYGPATH_W) 'davicom.c'; else $(CYGPATH_W) '$(srcdir)/davicom.c'; fi` - -libdrivers_a-depca.o: depca.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-depca.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-depca.Tpo" -c -o libdrivers_a-depca.o `test -f 'depca.c' || echo '$(srcdir)/'`depca.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-depca.Tpo" "$(DEPDIR)/libdrivers_a-depca.Po"; else rm -f "$(DEPDIR)/libdrivers_a-depca.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='depca.c' object='libdrivers_a-depca.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-depca.o `test -f 'depca.c' || echo '$(srcdir)/'`depca.c - -libdrivers_a-depca.obj: depca.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-depca.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-depca.Tpo" -c -o libdrivers_a-depca.obj `if test -f 'depca.c'; then $(CYGPATH_W) 'depca.c'; else $(CYGPATH_W) '$(srcdir)/depca.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-depca.Tpo" "$(DEPDIR)/libdrivers_a-depca.Po"; else rm -f "$(DEPDIR)/libdrivers_a-depca.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='depca.c' object='libdrivers_a-depca.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-depca.obj `if test -f 'depca.c'; then $(CYGPATH_W) 'depca.c'; else $(CYGPATH_W) '$(srcdir)/depca.c'; fi` - -libdrivers_a-eepro.o: eepro.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro.Tpo" -c -o libdrivers_a-eepro.o `test -f 'eepro.c' || echo '$(srcdir)/'`eepro.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro.Tpo" "$(DEPDIR)/libdrivers_a-eepro.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro.c' object='libdrivers_a-eepro.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro.o `test -f 'eepro.c' || echo '$(srcdir)/'`eepro.c - -libdrivers_a-eepro.obj: eepro.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro.Tpo" -c -o libdrivers_a-eepro.obj `if test -f 'eepro.c'; then $(CYGPATH_W) 'eepro.c'; else $(CYGPATH_W) '$(srcdir)/eepro.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro.Tpo" "$(DEPDIR)/libdrivers_a-eepro.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro.c' object='libdrivers_a-eepro.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro.obj `if test -f 'eepro.c'; then $(CYGPATH_W) 'eepro.c'; else $(CYGPATH_W) '$(srcdir)/eepro.c'; fi` - -libdrivers_a-eepro100.o: eepro100.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro100.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro100.Tpo" -c -o libdrivers_a-eepro100.o `test -f 'eepro100.c' || echo '$(srcdir)/'`eepro100.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo" "$(DEPDIR)/libdrivers_a-eepro100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro100.c' object='libdrivers_a-eepro100.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro100.o `test -f 'eepro100.c' || echo '$(srcdir)/'`eepro100.c - -libdrivers_a-eepro100.obj: eepro100.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-eepro100.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-eepro100.Tpo" -c -o libdrivers_a-eepro100.obj `if test -f 'eepro100.c'; then $(CYGPATH_W) 'eepro100.c'; else $(CYGPATH_W) '$(srcdir)/eepro100.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo" "$(DEPDIR)/libdrivers_a-eepro100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-eepro100.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='eepro100.c' object='libdrivers_a-eepro100.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-eepro100.obj `if test -f 'eepro100.c'; then $(CYGPATH_W) 'eepro100.c'; else $(CYGPATH_W) '$(srcdir)/eepro100.c'; fi` - -libdrivers_a-epic100.o: epic100.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-epic100.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-epic100.Tpo" -c -o libdrivers_a-epic100.o `test -f 'epic100.c' || echo '$(srcdir)/'`epic100.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-epic100.Tpo" "$(DEPDIR)/libdrivers_a-epic100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-epic100.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='epic100.c' object='libdrivers_a-epic100.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-epic100.o `test -f 'epic100.c' || echo '$(srcdir)/'`epic100.c - -libdrivers_a-epic100.obj: epic100.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-epic100.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-epic100.Tpo" -c -o libdrivers_a-epic100.obj `if test -f 'epic100.c'; then $(CYGPATH_W) 'epic100.c'; else $(CYGPATH_W) '$(srcdir)/epic100.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-epic100.Tpo" "$(DEPDIR)/libdrivers_a-epic100.Po"; else rm -f "$(DEPDIR)/libdrivers_a-epic100.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='epic100.c' object='libdrivers_a-epic100.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-epic100.obj `if test -f 'epic100.c'; then $(CYGPATH_W) 'epic100.c'; else $(CYGPATH_W) '$(srcdir)/epic100.c'; fi` - -libdrivers_a-fa311.o: fa311.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fa311.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-fa311.Tpo" -c -o libdrivers_a-fa311.o `test -f 'fa311.c' || echo '$(srcdir)/'`fa311.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fa311.Tpo" "$(DEPDIR)/libdrivers_a-fa311.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fa311.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fa311.c' object='libdrivers_a-fa311.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fa311.o `test -f 'fa311.c' || echo '$(srcdir)/'`fa311.c - -libdrivers_a-fa311.obj: fa311.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-fa311.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-fa311.Tpo" -c -o libdrivers_a-fa311.obj `if test -f 'fa311.c'; then $(CYGPATH_W) 'fa311.c'; else $(CYGPATH_W) '$(srcdir)/fa311.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-fa311.Tpo" "$(DEPDIR)/libdrivers_a-fa311.Po"; else rm -f "$(DEPDIR)/libdrivers_a-fa311.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fa311.c' object='libdrivers_a-fa311.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-fa311.obj `if test -f 'fa311.c'; then $(CYGPATH_W) 'fa311.c'; else $(CYGPATH_W) '$(srcdir)/fa311.c'; fi` - -libdrivers_a-i82586.o: i82586.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i82586.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-i82586.Tpo" -c -o libdrivers_a-i82586.o `test -f 'i82586.c' || echo '$(srcdir)/'`i82586.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-i82586.Tpo" "$(DEPDIR)/libdrivers_a-i82586.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i82586.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='i82586.c' object='libdrivers_a-i82586.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i82586.o `test -f 'i82586.c' || echo '$(srcdir)/'`i82586.c - -libdrivers_a-i82586.obj: i82586.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-i82586.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-i82586.Tpo" -c -o libdrivers_a-i82586.obj `if test -f 'i82586.c'; then $(CYGPATH_W) 'i82586.c'; else $(CYGPATH_W) '$(srcdir)/i82586.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-i82586.Tpo" "$(DEPDIR)/libdrivers_a-i82586.Po"; else rm -f "$(DEPDIR)/libdrivers_a-i82586.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='i82586.c' object='libdrivers_a-i82586.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-i82586.obj `if test -f 'i82586.c'; then $(CYGPATH_W) 'i82586.c'; else $(CYGPATH_W) '$(srcdir)/i82586.c'; fi` - -libdrivers_a-lance.o: lance.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-lance.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-lance.Tpo" -c -o libdrivers_a-lance.o `test -f 'lance.c' || echo '$(srcdir)/'`lance.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-lance.Tpo" "$(DEPDIR)/libdrivers_a-lance.Po"; else rm -f "$(DEPDIR)/libdrivers_a-lance.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lance.c' object='libdrivers_a-lance.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-lance.o `test -f 'lance.c' || echo '$(srcdir)/'`lance.c - -libdrivers_a-lance.obj: lance.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-lance.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-lance.Tpo" -c -o libdrivers_a-lance.obj `if test -f 'lance.c'; then $(CYGPATH_W) 'lance.c'; else $(CYGPATH_W) '$(srcdir)/lance.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-lance.Tpo" "$(DEPDIR)/libdrivers_a-lance.Po"; else rm -f "$(DEPDIR)/libdrivers_a-lance.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='lance.c' object='libdrivers_a-lance.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-lance.obj `if test -f 'lance.c'; then $(CYGPATH_W) 'lance.c'; else $(CYGPATH_W) '$(srcdir)/lance.c'; fi` - -libdrivers_a-natsemi.o: natsemi.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-natsemi.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-natsemi.Tpo" -c -o libdrivers_a-natsemi.o `test -f 'natsemi.c' || echo '$(srcdir)/'`natsemi.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo" "$(DEPDIR)/libdrivers_a-natsemi.Po"; else rm -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='natsemi.c' object='libdrivers_a-natsemi.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-natsemi.o `test -f 'natsemi.c' || echo '$(srcdir)/'`natsemi.c - -libdrivers_a-natsemi.obj: natsemi.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-natsemi.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-natsemi.Tpo" -c -o libdrivers_a-natsemi.obj `if test -f 'natsemi.c'; then $(CYGPATH_W) 'natsemi.c'; else $(CYGPATH_W) '$(srcdir)/natsemi.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo" "$(DEPDIR)/libdrivers_a-natsemi.Po"; else rm -f "$(DEPDIR)/libdrivers_a-natsemi.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='natsemi.c' object='libdrivers_a-natsemi.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-natsemi.obj `if test -f 'natsemi.c'; then $(CYGPATH_W) 'natsemi.c'; else $(CYGPATH_W) '$(srcdir)/natsemi.c'; fi` - -libdrivers_a-ni5010.o: ni5010.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ni5010.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ni5010.Tpo" -c -o libdrivers_a-ni5010.o `test -f 'ni5010.c' || echo '$(srcdir)/'`ni5010.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo" "$(DEPDIR)/libdrivers_a-ni5010.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ni5010.c' object='libdrivers_a-ni5010.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ni5010.o `test -f 'ni5010.c' || echo '$(srcdir)/'`ni5010.c - -libdrivers_a-ni5010.obj: ni5010.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ni5010.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ni5010.Tpo" -c -o libdrivers_a-ni5010.obj `if test -f 'ni5010.c'; then $(CYGPATH_W) 'ni5010.c'; else $(CYGPATH_W) '$(srcdir)/ni5010.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo" "$(DEPDIR)/libdrivers_a-ni5010.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ni5010.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ni5010.c' object='libdrivers_a-ni5010.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ni5010.obj `if test -f 'ni5010.c'; then $(CYGPATH_W) 'ni5010.c'; else $(CYGPATH_W) '$(srcdir)/ni5010.c'; fi` - -libdrivers_a-ns8390.o: ns8390.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns8390.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns8390.Tpo" -c -o libdrivers_a-ns8390.o `test -f 'ns8390.c' || echo '$(srcdir)/'`ns8390.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo" "$(DEPDIR)/libdrivers_a-ns8390.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ns8390.c' object='libdrivers_a-ns8390.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns8390.o `test -f 'ns8390.c' || echo '$(srcdir)/'`ns8390.c - -libdrivers_a-ns8390.obj: ns8390.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-ns8390.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-ns8390.Tpo" -c -o libdrivers_a-ns8390.obj `if test -f 'ns8390.c'; then $(CYGPATH_W) 'ns8390.c'; else $(CYGPATH_W) '$(srcdir)/ns8390.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo" "$(DEPDIR)/libdrivers_a-ns8390.Po"; else rm -f "$(DEPDIR)/libdrivers_a-ns8390.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='ns8390.c' object='libdrivers_a-ns8390.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-ns8390.obj `if test -f 'ns8390.c'; then $(CYGPATH_W) 'ns8390.c'; else $(CYGPATH_W) '$(srcdir)/ns8390.c'; fi` - -libdrivers_a-otulip.o: otulip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-otulip.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-otulip.Tpo" -c -o libdrivers_a-otulip.o `test -f 'otulip.c' || echo '$(srcdir)/'`otulip.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-otulip.Tpo" "$(DEPDIR)/libdrivers_a-otulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-otulip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='otulip.c' object='libdrivers_a-otulip.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-otulip.o `test -f 'otulip.c' || echo '$(srcdir)/'`otulip.c - -libdrivers_a-otulip.obj: otulip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-otulip.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-otulip.Tpo" -c -o libdrivers_a-otulip.obj `if test -f 'otulip.c'; then $(CYGPATH_W) 'otulip.c'; else $(CYGPATH_W) '$(srcdir)/otulip.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-otulip.Tpo" "$(DEPDIR)/libdrivers_a-otulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-otulip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='otulip.c' object='libdrivers_a-otulip.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-otulip.obj `if test -f 'otulip.c'; then $(CYGPATH_W) 'otulip.c'; else $(CYGPATH_W) '$(srcdir)/otulip.c'; fi` - -libdrivers_a-rtl8139.o: rtl8139.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-rtl8139.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" -c -o libdrivers_a-rtl8139.o `test -f 'rtl8139.c' || echo '$(srcdir)/'`rtl8139.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" "$(DEPDIR)/libdrivers_a-rtl8139.Po"; else rm -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rtl8139.c' object='libdrivers_a-rtl8139.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-rtl8139.o `test -f 'rtl8139.c' || echo '$(srcdir)/'`rtl8139.c - -libdrivers_a-rtl8139.obj: rtl8139.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-rtl8139.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" -c -o libdrivers_a-rtl8139.obj `if test -f 'rtl8139.c'; then $(CYGPATH_W) 'rtl8139.c'; else $(CYGPATH_W) '$(srcdir)/rtl8139.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo" "$(DEPDIR)/libdrivers_a-rtl8139.Po"; else rm -f "$(DEPDIR)/libdrivers_a-rtl8139.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rtl8139.c' object='libdrivers_a-rtl8139.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-rtl8139.obj `if test -f 'rtl8139.c'; then $(CYGPATH_W) 'rtl8139.c'; else $(CYGPATH_W) '$(srcdir)/rtl8139.c'; fi` - -libdrivers_a-sis900.o: sis900.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sis900.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-sis900.Tpo" -c -o libdrivers_a-sis900.o `test -f 'sis900.c' || echo '$(srcdir)/'`sis900.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sis900.Tpo" "$(DEPDIR)/libdrivers_a-sis900.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sis900.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sis900.c' object='libdrivers_a-sis900.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sis900.o `test -f 'sis900.c' || echo '$(srcdir)/'`sis900.c - -libdrivers_a-sis900.obj: sis900.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sis900.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-sis900.Tpo" -c -o libdrivers_a-sis900.obj `if test -f 'sis900.c'; then $(CYGPATH_W) 'sis900.c'; else $(CYGPATH_W) '$(srcdir)/sis900.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sis900.Tpo" "$(DEPDIR)/libdrivers_a-sis900.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sis900.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sis900.c' object='libdrivers_a-sis900.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sis900.obj `if test -f 'sis900.c'; then $(CYGPATH_W) 'sis900.c'; else $(CYGPATH_W) '$(srcdir)/sis900.c'; fi` - -libdrivers_a-sk_g16.o: sk_g16.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sk_g16.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" -c -o libdrivers_a-sk_g16.o `test -f 'sk_g16.c' || echo '$(srcdir)/'`sk_g16.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" "$(DEPDIR)/libdrivers_a-sk_g16.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sk_g16.c' object='libdrivers_a-sk_g16.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sk_g16.o `test -f 'sk_g16.c' || echo '$(srcdir)/'`sk_g16.c - -libdrivers_a-sk_g16.obj: sk_g16.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-sk_g16.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" -c -o libdrivers_a-sk_g16.obj `if test -f 'sk_g16.c'; then $(CYGPATH_W) 'sk_g16.c'; else $(CYGPATH_W) '$(srcdir)/sk_g16.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo" "$(DEPDIR)/libdrivers_a-sk_g16.Po"; else rm -f "$(DEPDIR)/libdrivers_a-sk_g16.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sk_g16.c' object='libdrivers_a-sk_g16.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-sk_g16.obj `if test -f 'sk_g16.c'; then $(CYGPATH_W) 'sk_g16.c'; else $(CYGPATH_W) '$(srcdir)/sk_g16.c'; fi` - -libdrivers_a-smc9000.o: smc9000.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-smc9000.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-smc9000.Tpo" -c -o libdrivers_a-smc9000.o `test -f 'smc9000.c' || echo '$(srcdir)/'`smc9000.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo" "$(DEPDIR)/libdrivers_a-smc9000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smc9000.c' object='libdrivers_a-smc9000.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-smc9000.o `test -f 'smc9000.c' || echo '$(srcdir)/'`smc9000.c - -libdrivers_a-smc9000.obj: smc9000.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-smc9000.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-smc9000.Tpo" -c -o libdrivers_a-smc9000.obj `if test -f 'smc9000.c'; then $(CYGPATH_W) 'smc9000.c'; else $(CYGPATH_W) '$(srcdir)/smc9000.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo" "$(DEPDIR)/libdrivers_a-smc9000.Po"; else rm -f "$(DEPDIR)/libdrivers_a-smc9000.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smc9000.c' object='libdrivers_a-smc9000.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-smc9000.obj `if test -f 'smc9000.c'; then $(CYGPATH_W) 'smc9000.c'; else $(CYGPATH_W) '$(srcdir)/smc9000.c'; fi` - -libdrivers_a-tiara.o: tiara.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tiara.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tiara.Tpo" -c -o libdrivers_a-tiara.o `test -f 'tiara.c' || echo '$(srcdir)/'`tiara.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tiara.Tpo" "$(DEPDIR)/libdrivers_a-tiara.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tiara.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tiara.c' object='libdrivers_a-tiara.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tiara.o `test -f 'tiara.c' || echo '$(srcdir)/'`tiara.c - -libdrivers_a-tiara.obj: tiara.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tiara.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tiara.Tpo" -c -o libdrivers_a-tiara.obj `if test -f 'tiara.c'; then $(CYGPATH_W) 'tiara.c'; else $(CYGPATH_W) '$(srcdir)/tiara.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tiara.Tpo" "$(DEPDIR)/libdrivers_a-tiara.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tiara.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tiara.c' object='libdrivers_a-tiara.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tiara.obj `if test -f 'tiara.c'; then $(CYGPATH_W) 'tiara.c'; else $(CYGPATH_W) '$(srcdir)/tiara.c'; fi` - -libdrivers_a-tlan.o: tlan.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tlan.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tlan.Tpo" -c -o libdrivers_a-tlan.o `test -f 'tlan.c' || echo '$(srcdir)/'`tlan.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tlan.Tpo" "$(DEPDIR)/libdrivers_a-tlan.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tlan.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tlan.c' object='libdrivers_a-tlan.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tlan.o `test -f 'tlan.c' || echo '$(srcdir)/'`tlan.c - -libdrivers_a-tlan.obj: tlan.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tlan.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tlan.Tpo" -c -o libdrivers_a-tlan.obj `if test -f 'tlan.c'; then $(CYGPATH_W) 'tlan.c'; else $(CYGPATH_W) '$(srcdir)/tlan.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tlan.Tpo" "$(DEPDIR)/libdrivers_a-tlan.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tlan.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tlan.c' object='libdrivers_a-tlan.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tlan.obj `if test -f 'tlan.c'; then $(CYGPATH_W) 'tlan.c'; else $(CYGPATH_W) '$(srcdir)/tlan.c'; fi` - -libdrivers_a-tulip.o: tulip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tulip.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-tulip.Tpo" -c -o libdrivers_a-tulip.o `test -f 'tulip.c' || echo '$(srcdir)/'`tulip.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tulip.Tpo" "$(DEPDIR)/libdrivers_a-tulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tulip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tulip.c' object='libdrivers_a-tulip.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tulip.o `test -f 'tulip.c' || echo '$(srcdir)/'`tulip.c - -libdrivers_a-tulip.obj: tulip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-tulip.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-tulip.Tpo" -c -o libdrivers_a-tulip.obj `if test -f 'tulip.c'; then $(CYGPATH_W) 'tulip.c'; else $(CYGPATH_W) '$(srcdir)/tulip.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-tulip.Tpo" "$(DEPDIR)/libdrivers_a-tulip.Po"; else rm -f "$(DEPDIR)/libdrivers_a-tulip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tulip.c' object='libdrivers_a-tulip.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-tulip.obj `if test -f 'tulip.c'; then $(CYGPATH_W) 'tulip.c'; else $(CYGPATH_W) '$(srcdir)/tulip.c'; fi` - -libdrivers_a-via-rhine.o: via-rhine.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-via-rhine.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" -c -o libdrivers_a-via-rhine.o `test -f 'via-rhine.c' || echo '$(srcdir)/'`via-rhine.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" "$(DEPDIR)/libdrivers_a-via-rhine.Po"; else rm -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='via-rhine.c' object='libdrivers_a-via-rhine.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-via-rhine.o `test -f 'via-rhine.c' || echo '$(srcdir)/'`via-rhine.c - -libdrivers_a-via-rhine.obj: via-rhine.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-via-rhine.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" -c -o libdrivers_a-via-rhine.obj `if test -f 'via-rhine.c'; then $(CYGPATH_W) 'via-rhine.c'; else $(CYGPATH_W) '$(srcdir)/via-rhine.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo" "$(DEPDIR)/libdrivers_a-via-rhine.Po"; else rm -f "$(DEPDIR)/libdrivers_a-via-rhine.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='via-rhine.c' object='libdrivers_a-via-rhine.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-via-rhine.obj `if test -f 'via-rhine.c'; then $(CYGPATH_W) 'via-rhine.c'; else $(CYGPATH_W) '$(srcdir)/via-rhine.c'; fi` - -libdrivers_a-w89c840.o: w89c840.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-w89c840.o -MD -MP -MF "$(DEPDIR)/libdrivers_a-w89c840.Tpo" -c -o libdrivers_a-w89c840.o `test -f 'w89c840.c' || echo '$(srcdir)/'`w89c840.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo" "$(DEPDIR)/libdrivers_a-w89c840.Po"; else rm -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='w89c840.c' object='libdrivers_a-w89c840.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-w89c840.o `test -f 'w89c840.c' || echo '$(srcdir)/'`w89c840.c - -libdrivers_a-w89c840.obj: w89c840.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -MT libdrivers_a-w89c840.obj -MD -MP -MF "$(DEPDIR)/libdrivers_a-w89c840.Tpo" -c -o libdrivers_a-w89c840.obj `if test -f 'w89c840.c'; then $(CYGPATH_W) 'w89c840.c'; else $(CYGPATH_W) '$(srcdir)/w89c840.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo" "$(DEPDIR)/libdrivers_a-w89c840.Po"; else rm -f "$(DEPDIR)/libdrivers_a-w89c840.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='w89c840.c' object='libdrivers_a-w89c840.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libdrivers_a_CFLAGS) $(CFLAGS) -c -o libdrivers_a-w89c840.obj `if test -f 'w89c840.c'; then $(CYGPATH_W) 'w89c840.c'; else $(CYGPATH_W) '$(srcdir)/w89c840.c'; fi` -uninstall-info-am: - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(LIBRARIES) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-exec-am: - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-info-am - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-noinstLIBRARIES ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-exec install-exec-am install-info \ - install-info-am install-man install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ - uninstall-am uninstall-info-am - - -# Is it really necessary to specify dependecies explicitly? -$(3c509_drivers): 3c509.c 3c509.h -$(3c509_drivers): %.o: 3c509.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(3c595_drivers): 3c595.c 3c595.h -$(3c595_drivers): %.o: 3c595.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(3c90x_drivers): 3c90x.c -$(3c90x_drivers): %.o: 3c90x.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(cs89x0_drivers): cs89x0.c cs89x0.h -$(cs89x0_drivers): %.o: cs89x0.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(davicom_drivers): davicom.c -$(davicom_drivers): %.o: davicom.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(depca_drivers): depca.c -$(depca_drivers): %.o: depca.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(eepro_drivers): eepro.c -$(eepro_drivers): %.o: eepro.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(eepro100_drivers): eepro100.c -$(eepro100_drivers): %.o: eepro100.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(epic100_drivers): epic100.c epic100.h -$(epic100_drivers): %.o: epic100.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -#$(fa311_drivers): fa311.c -#$(fa311_drivers): %.o: fa311.c -# $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ -# $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(i82586_drivers): i82586.c -$(i82586_drivers): %.o: i82586.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(lance_drivers): lance.c -$(lance_drivers): %.o: lance.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(natsemi_drivers): natsemi.c -$(natsemi_drivers): %.o: natsemi.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(ni5010_drivers): ni5010.c -$(ni5010_drivers): %.o: ni5010.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(ns8390_drivers): ns8390.c ns8390.h -$(ns8390_drivers): %.o: ns8390.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(otulip_drivers): otulip.c otulip.h -$(otulip_drivers): %.o: otulip.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(rtl8139_drivers): rtl8139.c -$(rtl8139_drivers): %.o: rtl8139.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(sis900_drivers): sis900.c -$(sis900_drivers): %.o: sis900.c sis900.h - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(sk_g16_drivers): sk_g16.c sk_g16.h -$(sk_g16_drivers): %.o: sk_g16.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(smc9000_drivers): smc9000.c smc9000.h -$(smc9000_drivers): %.o: smc9000.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(tiara_drivers): tiara.c -$(tiara_drivers): %.o: tiara.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -#$(tlan_drivers): tlan.c -#$(tlan_drivers): %.o: tlan.c -# $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ -# $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(tulip_drivers): tulip.c -$(tulip_drivers): %.o: tulip.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(via_rhine_drivers): via-rhine.c -$(via_rhine_drivers): %.o: via-rhine.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< - -$(w89c840_drivers): w89c840.c -$(w89c840_drivers): %.o: w89c840.c - $(COMPILE) $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NET_EXTRAFLAGS) $($(basename $@)_o_CFLAGS) -o $@ -c $< -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/stage1/Makefile.in b/stage1/Makefile.in deleted file mode 100644 index 2a0b7e578..000000000 --- a/stage1/Makefile.in +++ /dev/null @@ -1,434 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -SOURCES = $(stage1_exec_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -noinst_PROGRAMS = stage1.exec$(EXEEXT) -subdir = stage1 -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -PROGRAMS = $(noinst_PROGRAMS) -am_stage1_exec_OBJECTS = stage1.$(OBJEXT) -stage1_exec_OBJECTS = $(am_stage1_exec_OBJECTS) -stage1_exec_LDADD = $(LDADD) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS) -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(stage1_exec_SOURCES) -DIST_SOURCES = $(stage1_exec_SOURCES) -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(pkglibdir)" -nodist_pkglibDATA_INSTALL = $(INSTALL_DATA) -DATA = $(nodist_pkglib_DATA) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -pkglibdir = $(libdir)/$(PACKAGE)/$(host_cpu)-$(host_vendor) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -nodist_pkglib_DATA = stage1 -CLEANFILES = $(nodist_pkglib_DATA) - -# We can't use builtins or standard includes. -AM_CCASFLAGS = $(STAGE1_CFLAGS) -fno-builtin -nostdinc -stage1_exec_LDFLAGS = -nostdlib -Wl,-N,-Ttext,7C00 -stage1_exec_SOURCES = stage1.S stage1.h -SUFFIXES = .exec -all: all-am - -.SUFFIXES: -.SUFFIXES: .exec .S .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stage1/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu stage1/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -clean-noinstPROGRAMS: - -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) -stage1.exec$(EXEEXT): $(stage1_exec_OBJECTS) $(stage1_exec_DEPENDENCIES) - @rm -f stage1.exec$(EXEEXT) - $(LINK) $(stage1_exec_LDFLAGS) $(stage1_exec_OBJECTS) $(stage1_exec_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -.S.o: - $(CCASCOMPILE) -c $< - -.S.obj: - $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'` -uninstall-info-am: -install-nodist_pkglibDATA: $(nodist_pkglib_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)" - @list='$(nodist_pkglib_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(nodist_pkglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \ - $(nodist_pkglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \ - done - -uninstall-nodist_pkglibDATA: - @$(NORMAL_UNINSTALL) - @list='$(nodist_pkglib_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) $(DATA) -installdirs: - for dir in "$(DESTDIR)$(pkglibdir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-exec-am: install-nodist_pkglibDATA - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-info-am uninstall-nodist_pkglibDATA - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-noinstPROGRAMS ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-exec install-exec-am install-info \ - install-info-am install-man install-nodist_pkglibDATA \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-info-am \ - uninstall-nodist_pkglibDATA - -.exec: - $(OBJCOPY) -O binary $< $@ -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/stage2/Makefile.in b/stage2/Makefile.in deleted file mode 100644 index d0062bdb8..000000000 --- a/stage2/Makefile.in +++ /dev/null @@ -1,3250 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - - - - -SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) $(xfs_stage1_5_exec_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -EXTRA_PROGRAMS = nbloader.exec$(EXEEXT) pxeloader.exec$(EXEEXT) \ - diskless.exec$(EXEEXT) -@DISKLESS_SUPPORT_FALSE@noinst_PROGRAMS = pre_stage2.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ start.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ start_eltorito.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ e2fs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ fat_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ ffs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ iso9660_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ jfs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ minix_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ reiserfs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ ufs2_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ vstafs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_FALSE@ xfs_stage1_5.exec$(EXEEXT) -@DISKLESS_SUPPORT_TRUE@noinst_PROGRAMS = pre_stage2.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ start.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ start_eltorito.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ e2fs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ fat_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ ffs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ iso9660_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ jfs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ minix_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ reiserfs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ ufs2_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ vstafs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ xfs_stage1_5.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ nbloader.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ pxeloader.exec$(EXEEXT) \ -@DISKLESS_SUPPORT_TRUE@ diskless.exec$(EXEEXT) -subdir = stage2 -DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -LIBRARIES = $(noinst_LIBRARIES) -AR = ar -ARFLAGS = cru -libgrub_a_AR = $(AR) $(ARFLAGS) -libgrub_a_LIBADD = -am_libgrub_a_OBJECTS = libgrub_a-boot.$(OBJEXT) \ - libgrub_a-builtins.$(OBJEXT) libgrub_a-char_io.$(OBJEXT) \ - libgrub_a-cmdline.$(OBJEXT) libgrub_a-common.$(OBJEXT) \ - libgrub_a-disk_io.$(OBJEXT) libgrub_a-fsys_ext2fs.$(OBJEXT) \ - libgrub_a-fsys_fat.$(OBJEXT) libgrub_a-fsys_ffs.$(OBJEXT) \ - libgrub_a-fsys_iso9660.$(OBJEXT) libgrub_a-fsys_jfs.$(OBJEXT) \ - libgrub_a-fsys_minix.$(OBJEXT) \ - libgrub_a-fsys_reiserfs.$(OBJEXT) \ - libgrub_a-fsys_ufs2.$(OBJEXT) libgrub_a-fsys_vstafs.$(OBJEXT) \ - libgrub_a-fsys_xfs.$(OBJEXT) libgrub_a-gunzip.$(OBJEXT) \ - libgrub_a-md5.$(OBJEXT) libgrub_a-serial.$(OBJEXT) \ - libgrub_a-stage2.$(OBJEXT) libgrub_a-terminfo.$(OBJEXT) \ - libgrub_a-tparm.$(OBJEXT) -libgrub_a_OBJECTS = $(am_libgrub_a_OBJECTS) -PROGRAMS = $(noinst_PROGRAMS) -am__objects_1 = diskless_exec-asm.$(OBJEXT) \ - diskless_exec-bios.$(OBJEXT) diskless_exec-boot.$(OBJEXT) \ - diskless_exec-builtins.$(OBJEXT) \ - diskless_exec-char_io.$(OBJEXT) \ - diskless_exec-cmdline.$(OBJEXT) diskless_exec-common.$(OBJEXT) \ - diskless_exec-console.$(OBJEXT) \ - diskless_exec-disk_io.$(OBJEXT) \ - diskless_exec-fsys_ext2fs.$(OBJEXT) \ - diskless_exec-fsys_fat.$(OBJEXT) \ - diskless_exec-fsys_ffs.$(OBJEXT) \ - diskless_exec-fsys_iso9660.$(OBJEXT) \ - diskless_exec-fsys_jfs.$(OBJEXT) \ - diskless_exec-fsys_minix.$(OBJEXT) \ - diskless_exec-fsys_reiserfs.$(OBJEXT) \ - diskless_exec-fsys_ufs2.$(OBJEXT) \ - diskless_exec-fsys_vstafs.$(OBJEXT) \ - diskless_exec-fsys_xfs.$(OBJEXT) \ - diskless_exec-gunzip.$(OBJEXT) \ - diskless_exec-hercules.$(OBJEXT) diskless_exec-md5.$(OBJEXT) \ - diskless_exec-serial.$(OBJEXT) \ - diskless_exec-smp-imps.$(OBJEXT) \ - diskless_exec-stage2.$(OBJEXT) \ - diskless_exec-terminfo.$(OBJEXT) diskless_exec-tparm.$(OBJEXT) -am_diskless_exec_OBJECTS = $(am__objects_1) -diskless_exec_OBJECTS = $(am_diskless_exec_OBJECTS) -diskless_exec_DEPENDENCIES = ../netboot/libdrivers.a -am_e2fs_stage1_5_exec_OBJECTS = e2fs_stage1_5_exec-start.$(OBJEXT) \ - e2fs_stage1_5_exec-asm.$(OBJEXT) \ - e2fs_stage1_5_exec-common.$(OBJEXT) \ - e2fs_stage1_5_exec-char_io.$(OBJEXT) \ - e2fs_stage1_5_exec-disk_io.$(OBJEXT) \ - e2fs_stage1_5_exec-stage1_5.$(OBJEXT) \ - e2fs_stage1_5_exec-fsys_ext2fs.$(OBJEXT) \ - e2fs_stage1_5_exec-bios.$(OBJEXT) -e2fs_stage1_5_exec_OBJECTS = $(am_e2fs_stage1_5_exec_OBJECTS) -e2fs_stage1_5_exec_LDADD = $(LDADD) -am_fat_stage1_5_exec_OBJECTS = fat_stage1_5_exec-start.$(OBJEXT) \ - fat_stage1_5_exec-asm.$(OBJEXT) \ - fat_stage1_5_exec-common.$(OBJEXT) \ - fat_stage1_5_exec-char_io.$(OBJEXT) \ - fat_stage1_5_exec-disk_io.$(OBJEXT) \ - fat_stage1_5_exec-stage1_5.$(OBJEXT) \ - fat_stage1_5_exec-fsys_fat.$(OBJEXT) \ - fat_stage1_5_exec-bios.$(OBJEXT) -fat_stage1_5_exec_OBJECTS = $(am_fat_stage1_5_exec_OBJECTS) -fat_stage1_5_exec_LDADD = $(LDADD) -am_ffs_stage1_5_exec_OBJECTS = ffs_stage1_5_exec-start.$(OBJEXT) \ - ffs_stage1_5_exec-asm.$(OBJEXT) \ - ffs_stage1_5_exec-common.$(OBJEXT) \ - ffs_stage1_5_exec-char_io.$(OBJEXT) \ - ffs_stage1_5_exec-disk_io.$(OBJEXT) \ - ffs_stage1_5_exec-stage1_5.$(OBJEXT) \ - ffs_stage1_5_exec-fsys_ffs.$(OBJEXT) \ - ffs_stage1_5_exec-bios.$(OBJEXT) -ffs_stage1_5_exec_OBJECTS = $(am_ffs_stage1_5_exec_OBJECTS) -ffs_stage1_5_exec_LDADD = $(LDADD) -am_iso9660_stage1_5_exec_OBJECTS = \ - iso9660_stage1_5_exec-start_eltorito.$(OBJEXT) \ - iso9660_stage1_5_exec-asm.$(OBJEXT) \ - iso9660_stage1_5_exec-common.$(OBJEXT) \ - iso9660_stage1_5_exec-char_io.$(OBJEXT) \ - iso9660_stage1_5_exec-disk_io.$(OBJEXT) \ - iso9660_stage1_5_exec-stage1_5.$(OBJEXT) \ - iso9660_stage1_5_exec-fsys_iso9660.$(OBJEXT) \ - iso9660_stage1_5_exec-bios.$(OBJEXT) -iso9660_stage1_5_exec_OBJECTS = $(am_iso9660_stage1_5_exec_OBJECTS) -iso9660_stage1_5_exec_LDADD = $(LDADD) -am_jfs_stage1_5_exec_OBJECTS = jfs_stage1_5_exec-start.$(OBJEXT) \ - jfs_stage1_5_exec-asm.$(OBJEXT) \ - jfs_stage1_5_exec-common.$(OBJEXT) \ - jfs_stage1_5_exec-char_io.$(OBJEXT) \ - jfs_stage1_5_exec-disk_io.$(OBJEXT) \ - jfs_stage1_5_exec-stage1_5.$(OBJEXT) \ - jfs_stage1_5_exec-fsys_jfs.$(OBJEXT) \ - jfs_stage1_5_exec-bios.$(OBJEXT) -jfs_stage1_5_exec_OBJECTS = $(am_jfs_stage1_5_exec_OBJECTS) -jfs_stage1_5_exec_LDADD = $(LDADD) -am_minix_stage1_5_exec_OBJECTS = minix_stage1_5_exec-start.$(OBJEXT) \ - minix_stage1_5_exec-asm.$(OBJEXT) \ - minix_stage1_5_exec-common.$(OBJEXT) \ - minix_stage1_5_exec-char_io.$(OBJEXT) \ - minix_stage1_5_exec-disk_io.$(OBJEXT) \ - minix_stage1_5_exec-stage1_5.$(OBJEXT) \ - minix_stage1_5_exec-fsys_minix.$(OBJEXT) \ - minix_stage1_5_exec-bios.$(OBJEXT) -minix_stage1_5_exec_OBJECTS = $(am_minix_stage1_5_exec_OBJECTS) -minix_stage1_5_exec_LDADD = $(LDADD) -am_nbloader_exec_OBJECTS = nbloader_exec-nbloader.$(OBJEXT) -nbloader_exec_OBJECTS = $(am_nbloader_exec_OBJECTS) -nbloader_exec_LDADD = $(LDADD) -am_pre_stage2_exec_OBJECTS = pre_stage2_exec-asm.$(OBJEXT) \ - pre_stage2_exec-bios.$(OBJEXT) pre_stage2_exec-boot.$(OBJEXT) \ - pre_stage2_exec-builtins.$(OBJEXT) \ - pre_stage2_exec-char_io.$(OBJEXT) \ - pre_stage2_exec-cmdline.$(OBJEXT) \ - pre_stage2_exec-common.$(OBJEXT) \ - pre_stage2_exec-console.$(OBJEXT) \ - pre_stage2_exec-disk_io.$(OBJEXT) \ - pre_stage2_exec-fsys_ext2fs.$(OBJEXT) \ - pre_stage2_exec-fsys_fat.$(OBJEXT) \ - pre_stage2_exec-fsys_ffs.$(OBJEXT) \ - pre_stage2_exec-fsys_iso9660.$(OBJEXT) \ - pre_stage2_exec-fsys_jfs.$(OBJEXT) \ - pre_stage2_exec-fsys_minix.$(OBJEXT) \ - pre_stage2_exec-fsys_reiserfs.$(OBJEXT) \ - pre_stage2_exec-fsys_ufs2.$(OBJEXT) \ - pre_stage2_exec-fsys_vstafs.$(OBJEXT) \ - pre_stage2_exec-fsys_xfs.$(OBJEXT) \ - pre_stage2_exec-gunzip.$(OBJEXT) \ - pre_stage2_exec-hercules.$(OBJEXT) \ - pre_stage2_exec-md5.$(OBJEXT) pre_stage2_exec-serial.$(OBJEXT) \ - pre_stage2_exec-smp-imps.$(OBJEXT) \ - pre_stage2_exec-stage2.$(OBJEXT) \ - pre_stage2_exec-terminfo.$(OBJEXT) \ - pre_stage2_exec-tparm.$(OBJEXT) -pre_stage2_exec_OBJECTS = $(am_pre_stage2_exec_OBJECTS) -@NETBOOT_SUPPORT_TRUE@pre_stage2_exec_DEPENDENCIES = \ -@NETBOOT_SUPPORT_TRUE@ ../netboot/libdrivers.a -am_pxeloader_exec_OBJECTS = pxeloader_exec-pxeloader.$(OBJEXT) -pxeloader_exec_OBJECTS = $(am_pxeloader_exec_OBJECTS) -pxeloader_exec_LDADD = $(LDADD) -am_reiserfs_stage1_5_exec_OBJECTS = \ - reiserfs_stage1_5_exec-start.$(OBJEXT) \ - reiserfs_stage1_5_exec-asm.$(OBJEXT) \ - reiserfs_stage1_5_exec-common.$(OBJEXT) \ - reiserfs_stage1_5_exec-char_io.$(OBJEXT) \ - reiserfs_stage1_5_exec-disk_io.$(OBJEXT) \ - reiserfs_stage1_5_exec-stage1_5.$(OBJEXT) \ - reiserfs_stage1_5_exec-fsys_reiserfs.$(OBJEXT) \ - reiserfs_stage1_5_exec-bios.$(OBJEXT) -reiserfs_stage1_5_exec_OBJECTS = $(am_reiserfs_stage1_5_exec_OBJECTS) -reiserfs_stage1_5_exec_LDADD = $(LDADD) -am_start_exec_OBJECTS = start_exec-start.$(OBJEXT) -start_exec_OBJECTS = $(am_start_exec_OBJECTS) -start_exec_LDADD = $(LDADD) -am_start_eltorito_exec_OBJECTS = \ - start_eltorito_exec-start_eltorito.$(OBJEXT) -start_eltorito_exec_OBJECTS = $(am_start_eltorito_exec_OBJECTS) -start_eltorito_exec_LDADD = $(LDADD) -am_ufs2_stage1_5_exec_OBJECTS = ufs2_stage1_5_exec-start.$(OBJEXT) \ - ufs2_stage1_5_exec-asm.$(OBJEXT) \ - ufs2_stage1_5_exec-common.$(OBJEXT) \ - ufs2_stage1_5_exec-char_io.$(OBJEXT) \ - ufs2_stage1_5_exec-disk_io.$(OBJEXT) \ - ufs2_stage1_5_exec-stage1_5.$(OBJEXT) \ - ufs2_stage1_5_exec-fsys_ufs2.$(OBJEXT) \ - ufs2_stage1_5_exec-bios.$(OBJEXT) -ufs2_stage1_5_exec_OBJECTS = $(am_ufs2_stage1_5_exec_OBJECTS) -ufs2_stage1_5_exec_LDADD = $(LDADD) -am_vstafs_stage1_5_exec_OBJECTS = \ - vstafs_stage1_5_exec-start.$(OBJEXT) \ - vstafs_stage1_5_exec-asm.$(OBJEXT) \ - vstafs_stage1_5_exec-common.$(OBJEXT) \ - vstafs_stage1_5_exec-char_io.$(OBJEXT) \ - vstafs_stage1_5_exec-disk_io.$(OBJEXT) \ - vstafs_stage1_5_exec-stage1_5.$(OBJEXT) \ - vstafs_stage1_5_exec-fsys_vstafs.$(OBJEXT) \ - vstafs_stage1_5_exec-bios.$(OBJEXT) -vstafs_stage1_5_exec_OBJECTS = $(am_vstafs_stage1_5_exec_OBJECTS) -vstafs_stage1_5_exec_LDADD = $(LDADD) -am_xfs_stage1_5_exec_OBJECTS = xfs_stage1_5_exec-start.$(OBJEXT) \ - xfs_stage1_5_exec-asm.$(OBJEXT) \ - xfs_stage1_5_exec-common.$(OBJEXT) \ - xfs_stage1_5_exec-char_io.$(OBJEXT) \ - xfs_stage1_5_exec-disk_io.$(OBJEXT) \ - xfs_stage1_5_exec-stage1_5.$(OBJEXT) \ - xfs_stage1_5_exec-fsys_xfs.$(OBJEXT) \ - xfs_stage1_5_exec-bios.$(OBJEXT) -xfs_stage1_5_exec_OBJECTS = $(am_xfs_stage1_5_exec_OBJECTS) -xfs_stage1_5_exec_LDADD = $(LDADD) -SCRIPTS = $(noinst_SCRIPTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS) -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) \ - $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) \ - $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) \ - $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) \ - $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) \ - $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) \ - $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) \ - $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) \ - $(xfs_stage1_5_exec_SOURCES) -DIST_SOURCES = $(libgrub_a_SOURCES) $(diskless_exec_SOURCES) \ - $(e2fs_stage1_5_exec_SOURCES) $(fat_stage1_5_exec_SOURCES) \ - $(ffs_stage1_5_exec_SOURCES) $(iso9660_stage1_5_exec_SOURCES) \ - $(jfs_stage1_5_exec_SOURCES) $(minix_stage1_5_exec_SOURCES) \ - $(nbloader_exec_SOURCES) $(pre_stage2_exec_SOURCES) \ - $(pxeloader_exec_SOURCES) $(reiserfs_stage1_5_exec_SOURCES) \ - $(start_exec_SOURCES) $(start_eltorito_exec_SOURCES) \ - $(ufs2_stage1_5_exec_SOURCES) $(vstafs_stage1_5_exec_SOURCES) \ - $(xfs_stage1_5_exec_SOURCES) -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(pkglibdir)" -pkglibDATA_INSTALL = $(INSTALL_DATA) -DATA = $(noinst_DATA) $(pkglib_DATA) -HEADERS = $(noinst_HEADERS) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) - -# Stage 2 and Stage 1.5's. -pkglibdir = $(libdir)/$(PACKAGE)/$(host_cpu)-$(host_vendor) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ - -# For test target. -TESTS = size_test -noinst_SCRIPTS = $(TESTS) - -# For dist target. -noinst_HEADERS = apic.h defs.h dir.h disk_inode.h disk_inode_ffs.h \ - fat.h filesys.h freebsd.h fs.h hercules.h i386-elf.h \ - imgact_aout.h iso9660.h jfs.h mb_header.h mb_info.h md5.h \ - nbi.h pc_slice.h serial.h shared.h smp-imps.h term.h \ - terminfo.h tparm.h nbi.h ufs2.h vstafs.h xfs.h - -EXTRA_DIST = setjmp.S apm.S $(noinst_SCRIPTS) - -# For . -INCLUDES = -I$(top_srcdir)/stage1 - -# The library for /sbin/grub. -noinst_LIBRARIES = libgrub.a -libgrub_a_SOURCES = boot.c builtins.c char_io.c cmdline.c common.c \ - disk_io.c fsys_ext2fs.c fsys_fat.c fsys_ffs.c fsys_iso9660.c \ - fsys_jfs.c fsys_minix.c fsys_reiserfs.c fsys_ufs2.c \ - fsys_vstafs.c fsys_xfs.c gunzip.c md5.c serial.c stage2.c \ - terminfo.c tparm.c - -libgrub_a_CFLAGS = $(GRUB_CFLAGS) -I$(top_srcdir)/lib \ - -DGRUB_UTIL=1 -DFSYS_EXT2FS=1 -DFSYS_FAT=1 -DFSYS_FFS=1 \ - -DFSYS_ISO9660=1 -DFSYS_JFS=1 -DFSYS_MINIX=1 -DFSYS_REISERFS=1 \ - -DFSYS_UFS2=1 -DFSYS_VSTAFS=1 -DFSYS_XFS=1 \ - -DUSE_MD5_PASSWORDS=1 -DSUPPORT_SERIAL=1 -DSUPPORT_HERCULES=1 - -@DISKLESS_SUPPORT_FALSE@pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \ -@DISKLESS_SUPPORT_FALSE@ ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \ -@DISKLESS_SUPPORT_FALSE@ reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5 - -@DISKLESS_SUPPORT_TRUE@pkglib_DATA = stage2 stage2_eltorito e2fs_stage1_5 fat_stage1_5 \ -@DISKLESS_SUPPORT_TRUE@ ffs_stage1_5 iso9660_stage1_5 jfs_stage1_5 minix_stage1_5 \ -@DISKLESS_SUPPORT_TRUE@ reiserfs_stage1_5 ufs2_stage1_5 vstafs_stage1_5 xfs_stage1_5 \ -@DISKLESS_SUPPORT_TRUE@ nbgrub pxegrub - -@DISKLESS_SUPPORT_FALSE@noinst_DATA = pre_stage2 start start_eltorito -@DISKLESS_SUPPORT_TRUE@noinst_DATA = pre_stage2 start start_eltorito nbloader pxeloader diskless -MOSTLYCLEANFILES = $(noinst_PROGRAMS) -PRE_STAGE2_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,8200 -START_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,8000 -NBLOADER_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,0 -PXELOADER_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,7C00 -START_ELTORITO_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,7C00 -@NETBOOT_SUPPORT_FALSE@NETBOOT_FLAGS = -@NETBOOT_SUPPORT_TRUE@NETBOOT_FLAGS = -I$(top_srcdir)/netboot -DSUPPORT_NETBOOT=1 -@SERIAL_SUPPORT_FALSE@SERIAL_FLAGS = -@SERIAL_SUPPORT_TRUE@SERIAL_FLAGS = -DSUPPORT_SERIAL=1 -@HERCULES_SUPPORT_FALSE@HERCULES_FLAGS = -@HERCULES_SUPPORT_TRUE@HERCULES_FLAGS = -DSUPPORT_HERCULES=1 -STAGE2_COMPILE = $(STAGE2_CFLAGS) -fno-builtin -nostdinc \ - $(NETBOOT_FLAGS) $(SERIAL_FLAGS) $(HERCULES_FLAGS) - -STAGE1_5_LINK = -nostdlib -Wl,-N -Wl,-Ttext -Wl,2000 -STAGE1_5_COMPILE = $(STAGE2_COMPILE) -DNO_DECOMPRESSION=1 -DSTAGE1_5=1 - -# For stage2 target. -pre_stage2_exec_SOURCES = asm.S bios.c boot.c builtins.c char_io.c \ - cmdline.c common.c console.c disk_io.c fsys_ext2fs.c \ - fsys_fat.c fsys_ffs.c fsys_iso9660.c fsys_jfs.c fsys_minix.c \ - fsys_reiserfs.c fsys_ufs2.c fsys_vstafs.c fsys_xfs.c gunzip.c \ - hercules.c md5.c serial.c smp-imps.c stage2.c terminfo.c tparm.c - -pre_stage2_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) -pre_stage2_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) -pre_stage2_exec_LDFLAGS = $(PRE_STAGE2_LINK) -@NETBOOT_SUPPORT_TRUE@pre_stage2_exec_LDADD = ../netboot/libdrivers.a -@DISKLESS_SUPPORT_FALSE@BUILT_SOURCES = stage2_size.h -@DISKLESS_SUPPORT_TRUE@BUILT_SOURCES = stage2_size.h diskless_size.h -CLEANFILES = $(pkglib_DATA) $(noinst_DATA) $(BUILT_SOURCES) -start_exec_SOURCES = start.S -start_exec_CCASFLAGS = $(STAGE2_COMPILE) -start_exec_LDFLAGS = $(START_LINK) -start_eltorito_exec_SOURCES = start_eltorito.S -start_eltorito_exec_CCASFLAGS = $(STAGE2_COMPILE) -start_eltorito_exec_LDFLAGS = $(START_ELTORITO_LINK) - -# For e2fs_stage1_5 target. -e2fs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \ - stage1_5.c fsys_ext2fs.c bios.c - -e2fs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_EXT2FS=1 \ - -DNO_BLOCK_FILES=1 - -e2fs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_EXT2FS=1 \ - -DNO_BLOCK_FILES=1 - -e2fs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For fat_stage1_5 target. -fat_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \ - stage1_5.c fsys_fat.c bios.c - -fat_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FAT=1 \ - -DNO_BLOCK_FILES=1 - -fat_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FAT=1 \ - -DNO_BLOCK_FILES=1 - -fat_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For ffs_stage1_5 target. -ffs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \ - stage1_5.c fsys_ffs.c bios.c - -ffs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FFS=1 \ - -DNO_BLOCK_FILES=1 - -ffs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_FFS=1 \ - -DNO_BLOCK_FILES=1 - -ffs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For ufs2_stage1_5 target. -ufs2_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \ - stage1_5.c fsys_ufs2.c bios.c - -ufs2_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_UFS2=1 \ - -DNO_BLOCK_FILES=1 - -ufs2_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_UFS2=1 \ - -DNO_BLOCK_FILES=1 - -ufs2_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For minix_stage1_5 target. -minix_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c disk_io.c \ - stage1_5.c fsys_minix.c bios.c - -minix_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_MINIX=1 \ - -DNO_BLOCK_FILES=1 - -minix_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_MINIX=1 \ - -DNO_BLOCK_FILES=1 - -minix_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For reiserfs_stage1_5 target. -reiserfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \ - disk_io.c stage1_5.c fsys_reiserfs.c bios.c - -reiserfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_REISERFS=1 \ - -DNO_BLOCK_FILES=1 - -reiserfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_REISERFS=1 \ - -DNO_BLOCK_FILES=1 - -reiserfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For vstafs_stage1_5 target. -vstafs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \ - disk_io.c stage1_5.c fsys_vstafs.c bios.c - -vstafs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_VSTAFS=1 \ - -DNO_BLOCK_FILES=1 - -vstafs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_VSTAFS=1 \ - -DNO_BLOCK_FILES=1 - -vstafs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For jfs_stage1_5 target. -jfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \ - disk_io.c stage1_5.c fsys_jfs.c bios.c - -jfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_JFS=1 \ - -DNO_BLOCK_FILES=1 - -jfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_JFS=1 \ - -DNO_BLOCK_FILES=1 - -jfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For xfs_stage1_5 target. -xfs_stage1_5_exec_SOURCES = start.S asm.S common.c char_io.c \ - disk_io.c stage1_5.c fsys_xfs.c bios.c - -xfs_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_XFS=1 \ - -DNO_BLOCK_FILES=1 - -xfs_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_XFS=1 \ - -DNO_BLOCK_FILES=1 - -xfs_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For iso9660_stage1_5 target. -iso9660_stage1_5_exec_SOURCES = start_eltorito.S asm.S common.c char_io.c \ - disk_io.c stage1_5.c fsys_iso9660.c bios.c - -iso9660_stage1_5_exec_CFLAGS = $(STAGE1_5_COMPILE) -DFSYS_ISO9660=1 \ - -DNO_BLOCK_FILES=1 - -iso9660_stage1_5_exec_CCASFLAGS = $(STAGE1_5_COMPILE) -DFSYS_ISO9660=1 \ - -DNO_BLOCK_FILES=1 - -iso9660_stage1_5_exec_LDFLAGS = $(STAGE1_5_LINK) - -# For diskless target. -diskless_exec_SOURCES = $(pre_stage2_exec_SOURCES) -diskless_exec_CFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) \ - -DSUPPORT_DISKLESS=1 - -diskless_exec_CCASFLAGS = $(STAGE2_COMPILE) $(FSYS_CFLAGS) \ - -DSUPPORT_DISKLESS=1 - -diskless_exec_LDFLAGS = $(PRE_STAGE2_LINK) -diskless_exec_LDADD = ../netboot/libdrivers.a - -# For nbloader target. -nbloader_exec_SOURCES = nbloader.S -nbloader_exec_CCASFLAGS = $(STAGE2_COMPILE) -nbloader_exec_LDFLAGS = $(NBLOADER_LINK) - -# For pxeloader target. -pxeloader_exec_SOURCES = pxeloader.S -pxeloader_exec_CCASFLAGS = $(STAGE2_COMPILE) -pxeloader_exec_LDFLAGS = $(PXELOADER_LINK) - -# General rule for making a raw binary. -SUFFIXES = .exec -all: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .exec .S .c .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu stage2/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu stage2/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -clean-noinstLIBRARIES: - -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) -libgrub.a: $(libgrub_a_OBJECTS) $(libgrub_a_DEPENDENCIES) - -rm -f libgrub.a - $(libgrub_a_AR) libgrub.a $(libgrub_a_OBJECTS) $(libgrub_a_LIBADD) - $(RANLIB) libgrub.a - -clean-noinstPROGRAMS: - -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) -diskless.exec$(EXEEXT): $(diskless_exec_OBJECTS) $(diskless_exec_DEPENDENCIES) - @rm -f diskless.exec$(EXEEXT) - $(LINK) $(diskless_exec_LDFLAGS) $(diskless_exec_OBJECTS) $(diskless_exec_LDADD) $(LIBS) -e2fs_stage1_5.exec$(EXEEXT): $(e2fs_stage1_5_exec_OBJECTS) $(e2fs_stage1_5_exec_DEPENDENCIES) - @rm -f e2fs_stage1_5.exec$(EXEEXT) - $(LINK) $(e2fs_stage1_5_exec_LDFLAGS) $(e2fs_stage1_5_exec_OBJECTS) $(e2fs_stage1_5_exec_LDADD) $(LIBS) -fat_stage1_5.exec$(EXEEXT): $(fat_stage1_5_exec_OBJECTS) $(fat_stage1_5_exec_DEPENDENCIES) - @rm -f fat_stage1_5.exec$(EXEEXT) - $(LINK) $(fat_stage1_5_exec_LDFLAGS) $(fat_stage1_5_exec_OBJECTS) $(fat_stage1_5_exec_LDADD) $(LIBS) -ffs_stage1_5.exec$(EXEEXT): $(ffs_stage1_5_exec_OBJECTS) $(ffs_stage1_5_exec_DEPENDENCIES) - @rm -f ffs_stage1_5.exec$(EXEEXT) - $(LINK) $(ffs_stage1_5_exec_LDFLAGS) $(ffs_stage1_5_exec_OBJECTS) $(ffs_stage1_5_exec_LDADD) $(LIBS) -iso9660_stage1_5.exec$(EXEEXT): $(iso9660_stage1_5_exec_OBJECTS) $(iso9660_stage1_5_exec_DEPENDENCIES) - @rm -f iso9660_stage1_5.exec$(EXEEXT) - $(LINK) $(iso9660_stage1_5_exec_LDFLAGS) $(iso9660_stage1_5_exec_OBJECTS) $(iso9660_stage1_5_exec_LDADD) $(LIBS) -jfs_stage1_5.exec$(EXEEXT): $(jfs_stage1_5_exec_OBJECTS) $(jfs_stage1_5_exec_DEPENDENCIES) - @rm -f jfs_stage1_5.exec$(EXEEXT) - $(LINK) $(jfs_stage1_5_exec_LDFLAGS) $(jfs_stage1_5_exec_OBJECTS) $(jfs_stage1_5_exec_LDADD) $(LIBS) -minix_stage1_5.exec$(EXEEXT): $(minix_stage1_5_exec_OBJECTS) $(minix_stage1_5_exec_DEPENDENCIES) - @rm -f minix_stage1_5.exec$(EXEEXT) - $(LINK) $(minix_stage1_5_exec_LDFLAGS) $(minix_stage1_5_exec_OBJECTS) $(minix_stage1_5_exec_LDADD) $(LIBS) -nbloader.exec$(EXEEXT): $(nbloader_exec_OBJECTS) $(nbloader_exec_DEPENDENCIES) - @rm -f nbloader.exec$(EXEEXT) - $(LINK) $(nbloader_exec_LDFLAGS) $(nbloader_exec_OBJECTS) $(nbloader_exec_LDADD) $(LIBS) -pre_stage2.exec$(EXEEXT): $(pre_stage2_exec_OBJECTS) $(pre_stage2_exec_DEPENDENCIES) - @rm -f pre_stage2.exec$(EXEEXT) - $(LINK) $(pre_stage2_exec_LDFLAGS) $(pre_stage2_exec_OBJECTS) $(pre_stage2_exec_LDADD) $(LIBS) -pxeloader.exec$(EXEEXT): $(pxeloader_exec_OBJECTS) $(pxeloader_exec_DEPENDENCIES) - @rm -f pxeloader.exec$(EXEEXT) - $(LINK) $(pxeloader_exec_LDFLAGS) $(pxeloader_exec_OBJECTS) $(pxeloader_exec_LDADD) $(LIBS) -reiserfs_stage1_5.exec$(EXEEXT): $(reiserfs_stage1_5_exec_OBJECTS) $(reiserfs_stage1_5_exec_DEPENDENCIES) - @rm -f reiserfs_stage1_5.exec$(EXEEXT) - $(LINK) $(reiserfs_stage1_5_exec_LDFLAGS) $(reiserfs_stage1_5_exec_OBJECTS) $(reiserfs_stage1_5_exec_LDADD) $(LIBS) -start.exec$(EXEEXT): $(start_exec_OBJECTS) $(start_exec_DEPENDENCIES) - @rm -f start.exec$(EXEEXT) - $(LINK) $(start_exec_LDFLAGS) $(start_exec_OBJECTS) $(start_exec_LDADD) $(LIBS) -start_eltorito.exec$(EXEEXT): $(start_eltorito_exec_OBJECTS) $(start_eltorito_exec_DEPENDENCIES) - @rm -f start_eltorito.exec$(EXEEXT) - $(LINK) $(start_eltorito_exec_LDFLAGS) $(start_eltorito_exec_OBJECTS) $(start_eltorito_exec_LDADD) $(LIBS) -ufs2_stage1_5.exec$(EXEEXT): $(ufs2_stage1_5_exec_OBJECTS) $(ufs2_stage1_5_exec_DEPENDENCIES) - @rm -f ufs2_stage1_5.exec$(EXEEXT) - $(LINK) $(ufs2_stage1_5_exec_LDFLAGS) $(ufs2_stage1_5_exec_OBJECTS) $(ufs2_stage1_5_exec_LDADD) $(LIBS) -vstafs_stage1_5.exec$(EXEEXT): $(vstafs_stage1_5_exec_OBJECTS) $(vstafs_stage1_5_exec_DEPENDENCIES) - @rm -f vstafs_stage1_5.exec$(EXEEXT) - $(LINK) $(vstafs_stage1_5_exec_LDFLAGS) $(vstafs_stage1_5_exec_OBJECTS) $(vstafs_stage1_5_exec_LDADD) $(LIBS) -xfs_stage1_5.exec$(EXEEXT): $(xfs_stage1_5_exec_OBJECTS) $(xfs_stage1_5_exec_DEPENDENCIES) - @rm -f xfs_stage1_5.exec$(EXEEXT) - $(LINK) $(xfs_stage1_5_exec_LDFLAGS) $(xfs_stage1_5_exec_OBJECTS) $(xfs_stage1_5_exec_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-boot.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-builtins.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-cmdline.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-console.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ext2fs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_fat.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ffs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_iso9660.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_jfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_minix.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_reiserfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_ufs2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_vstafs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-fsys_xfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-gunzip.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-hercules.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-md5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-serial.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-smp-imps.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-stage2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-terminfo.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diskless_exec-tparm.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fat_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-boot.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-builtins.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-cmdline.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ext2fs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_fat.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ffs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_iso9660.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_jfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_minix.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_reiserfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_ufs2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_vstafs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-fsys_xfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-gunzip.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-md5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-serial.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-stage2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-terminfo.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgrub_a-tparm.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/minix_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-boot.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-builtins.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-cmdline.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-console.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_fat.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ffs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_jfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_minix.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-gunzip.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-hercules.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-md5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-serial.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-smp-imps.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-stage2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-terminfo.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pre_stage2_exec-tparm.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-bios.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-char_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-common.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-disk_io.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Po@am__quote@ - -.S.o: - $(CCASCOMPILE) -c $< - -.S.obj: - $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'` - -diskless_exec-asm.o: asm.S - $(CCAS) $(diskless_exec_CCASFLAGS) $(CCASFLAGS) -c -o diskless_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -diskless_exec-asm.obj: asm.S - $(CCAS) $(diskless_exec_CCASFLAGS) $(CCASFLAGS) -c -o diskless_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -e2fs_stage1_5_exec-start.o: start.S - $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -e2fs_stage1_5_exec-start.obj: start.S - $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -e2fs_stage1_5_exec-asm.o: asm.S - $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -e2fs_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(e2fs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o e2fs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -fat_stage1_5_exec-start.o: start.S - $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -fat_stage1_5_exec-start.obj: start.S - $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -fat_stage1_5_exec-asm.o: asm.S - $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -fat_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(fat_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o fat_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -ffs_stage1_5_exec-start.o: start.S - $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -ffs_stage1_5_exec-start.obj: start.S - $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -ffs_stage1_5_exec-asm.o: asm.S - $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -ffs_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(ffs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ffs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -iso9660_stage1_5_exec-start_eltorito.o: start_eltorito.S - $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-start_eltorito.o `test -f 'start_eltorito.S' || echo '$(srcdir)/'`start_eltorito.S - -iso9660_stage1_5_exec-start_eltorito.obj: start_eltorito.S - $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-start_eltorito.obj `if test -f 'start_eltorito.S'; then $(CYGPATH_W) 'start_eltorito.S'; else $(CYGPATH_W) '$(srcdir)/start_eltorito.S'; fi` - -iso9660_stage1_5_exec-asm.o: asm.S - $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -iso9660_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(iso9660_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o iso9660_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -jfs_stage1_5_exec-start.o: start.S - $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -jfs_stage1_5_exec-start.obj: start.S - $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -jfs_stage1_5_exec-asm.o: asm.S - $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -jfs_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(jfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o jfs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -minix_stage1_5_exec-start.o: start.S - $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -minix_stage1_5_exec-start.obj: start.S - $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -minix_stage1_5_exec-asm.o: asm.S - $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -minix_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(minix_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o minix_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -nbloader_exec-nbloader.o: nbloader.S - $(CCAS) $(nbloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o nbloader_exec-nbloader.o `test -f 'nbloader.S' || echo '$(srcdir)/'`nbloader.S - -nbloader_exec-nbloader.obj: nbloader.S - $(CCAS) $(nbloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o nbloader_exec-nbloader.obj `if test -f 'nbloader.S'; then $(CYGPATH_W) 'nbloader.S'; else $(CYGPATH_W) '$(srcdir)/nbloader.S'; fi` - -pre_stage2_exec-asm.o: asm.S - $(CCAS) $(pre_stage2_exec_CCASFLAGS) $(CCASFLAGS) -c -o pre_stage2_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -pre_stage2_exec-asm.obj: asm.S - $(CCAS) $(pre_stage2_exec_CCASFLAGS) $(CCASFLAGS) -c -o pre_stage2_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -pxeloader_exec-pxeloader.o: pxeloader.S - $(CCAS) $(pxeloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o pxeloader_exec-pxeloader.o `test -f 'pxeloader.S' || echo '$(srcdir)/'`pxeloader.S - -pxeloader_exec-pxeloader.obj: pxeloader.S - $(CCAS) $(pxeloader_exec_CCASFLAGS) $(CCASFLAGS) -c -o pxeloader_exec-pxeloader.obj `if test -f 'pxeloader.S'; then $(CYGPATH_W) 'pxeloader.S'; else $(CYGPATH_W) '$(srcdir)/pxeloader.S'; fi` - -reiserfs_stage1_5_exec-start.o: start.S - $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -reiserfs_stage1_5_exec-start.obj: start.S - $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -reiserfs_stage1_5_exec-asm.o: asm.S - $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -reiserfs_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(reiserfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o reiserfs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -start_exec-start.o: start.S - $(CCAS) $(start_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -start_exec-start.obj: start.S - $(CCAS) $(start_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -start_eltorito_exec-start_eltorito.o: start_eltorito.S - $(CCAS) $(start_eltorito_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_eltorito_exec-start_eltorito.o `test -f 'start_eltorito.S' || echo '$(srcdir)/'`start_eltorito.S - -start_eltorito_exec-start_eltorito.obj: start_eltorito.S - $(CCAS) $(start_eltorito_exec_CCASFLAGS) $(CCASFLAGS) -c -o start_eltorito_exec-start_eltorito.obj `if test -f 'start_eltorito.S'; then $(CYGPATH_W) 'start_eltorito.S'; else $(CYGPATH_W) '$(srcdir)/start_eltorito.S'; fi` - -ufs2_stage1_5_exec-start.o: start.S - $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -ufs2_stage1_5_exec-start.obj: start.S - $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -ufs2_stage1_5_exec-asm.o: asm.S - $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -ufs2_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(ufs2_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o ufs2_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -vstafs_stage1_5_exec-start.o: start.S - $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -vstafs_stage1_5_exec-start.obj: start.S - $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -vstafs_stage1_5_exec-asm.o: asm.S - $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -vstafs_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(vstafs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o vstafs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -xfs_stage1_5_exec-start.o: start.S - $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-start.o `test -f 'start.S' || echo '$(srcdir)/'`start.S - -xfs_stage1_5_exec-start.obj: start.S - $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-start.obj `if test -f 'start.S'; then $(CYGPATH_W) 'start.S'; else $(CYGPATH_W) '$(srcdir)/start.S'; fi` - -xfs_stage1_5_exec-asm.o: asm.S - $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-asm.o `test -f 'asm.S' || echo '$(srcdir)/'`asm.S - -xfs_stage1_5_exec-asm.obj: asm.S - $(CCAS) $(xfs_stage1_5_exec_CCASFLAGS) $(CCASFLAGS) -c -o xfs_stage1_5_exec-asm.obj `if test -f 'asm.S'; then $(CYGPATH_W) 'asm.S'; else $(CYGPATH_W) '$(srcdir)/asm.S'; fi` - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -libgrub_a-boot.o: boot.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-boot.o -MD -MP -MF "$(DEPDIR)/libgrub_a-boot.Tpo" -c -o libgrub_a-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-boot.Tpo" "$(DEPDIR)/libgrub_a-boot.Po"; else rm -f "$(DEPDIR)/libgrub_a-boot.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='libgrub_a-boot.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c - -libgrub_a-boot.obj: boot.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-boot.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-boot.Tpo" -c -o libgrub_a-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-boot.Tpo" "$(DEPDIR)/libgrub_a-boot.Po"; else rm -f "$(DEPDIR)/libgrub_a-boot.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='libgrub_a-boot.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi` - -libgrub_a-builtins.o: builtins.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-builtins.o -MD -MP -MF "$(DEPDIR)/libgrub_a-builtins.Tpo" -c -o libgrub_a-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-builtins.Tpo" "$(DEPDIR)/libgrub_a-builtins.Po"; else rm -f "$(DEPDIR)/libgrub_a-builtins.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='libgrub_a-builtins.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c - -libgrub_a-builtins.obj: builtins.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-builtins.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-builtins.Tpo" -c -o libgrub_a-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-builtins.Tpo" "$(DEPDIR)/libgrub_a-builtins.Po"; else rm -f "$(DEPDIR)/libgrub_a-builtins.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='libgrub_a-builtins.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi` - -libgrub_a-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-char_io.o -MD -MP -MF "$(DEPDIR)/libgrub_a-char_io.Tpo" -c -o libgrub_a-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-char_io.Tpo" "$(DEPDIR)/libgrub_a-char_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='libgrub_a-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -libgrub_a-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-char_io.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-char_io.Tpo" -c -o libgrub_a-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-char_io.Tpo" "$(DEPDIR)/libgrub_a-char_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='libgrub_a-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -libgrub_a-cmdline.o: cmdline.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-cmdline.o -MD -MP -MF "$(DEPDIR)/libgrub_a-cmdline.Tpo" -c -o libgrub_a-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-cmdline.Tpo" "$(DEPDIR)/libgrub_a-cmdline.Po"; else rm -f "$(DEPDIR)/libgrub_a-cmdline.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='libgrub_a-cmdline.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c - -libgrub_a-cmdline.obj: cmdline.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-cmdline.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-cmdline.Tpo" -c -o libgrub_a-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-cmdline.Tpo" "$(DEPDIR)/libgrub_a-cmdline.Po"; else rm -f "$(DEPDIR)/libgrub_a-cmdline.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='libgrub_a-cmdline.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi` - -libgrub_a-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-common.o -MD -MP -MF "$(DEPDIR)/libgrub_a-common.Tpo" -c -o libgrub_a-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-common.Tpo" "$(DEPDIR)/libgrub_a-common.Po"; else rm -f "$(DEPDIR)/libgrub_a-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='libgrub_a-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -libgrub_a-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-common.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-common.Tpo" -c -o libgrub_a-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-common.Tpo" "$(DEPDIR)/libgrub_a-common.Po"; else rm -f "$(DEPDIR)/libgrub_a-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='libgrub_a-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -libgrub_a-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-disk_io.o -MD -MP -MF "$(DEPDIR)/libgrub_a-disk_io.Tpo" -c -o libgrub_a-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-disk_io.Tpo" "$(DEPDIR)/libgrub_a-disk_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='libgrub_a-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -libgrub_a-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-disk_io.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-disk_io.Tpo" -c -o libgrub_a-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-disk_io.Tpo" "$(DEPDIR)/libgrub_a-disk_io.Po"; else rm -f "$(DEPDIR)/libgrub_a-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='libgrub_a-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -libgrub_a-fsys_ext2fs.o: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" -c -o libgrub_a-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='libgrub_a-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c - -libgrub_a-fsys_ext2fs.obj: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" -c -o libgrub_a-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='libgrub_a-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi` - -libgrub_a-fsys_fat.o: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_fat.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" -c -o libgrub_a-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" "$(DEPDIR)/libgrub_a-fsys_fat.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='libgrub_a-fsys_fat.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c - -libgrub_a-fsys_fat.obj: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" -c -o libgrub_a-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo" "$(DEPDIR)/libgrub_a-fsys_fat.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='libgrub_a-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi` - -libgrub_a-fsys_ffs.o: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" -c -o libgrub_a-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ffs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='libgrub_a-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c - -libgrub_a-fsys_ffs.obj: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" -c -o libgrub_a-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo" "$(DEPDIR)/libgrub_a-fsys_ffs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='libgrub_a-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi` - -libgrub_a-fsys_iso9660.o: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" -c -o libgrub_a-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" "$(DEPDIR)/libgrub_a-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='libgrub_a-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c - -libgrub_a-fsys_iso9660.obj: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" -c -o libgrub_a-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo" "$(DEPDIR)/libgrub_a-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='libgrub_a-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi` - -libgrub_a-fsys_jfs.o: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" -c -o libgrub_a-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_jfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='libgrub_a-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c - -libgrub_a-fsys_jfs.obj: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" -c -o libgrub_a-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_jfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='libgrub_a-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi` - -libgrub_a-fsys_minix.o: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_minix.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" -c -o libgrub_a-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" "$(DEPDIR)/libgrub_a-fsys_minix.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='libgrub_a-fsys_minix.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c - -libgrub_a-fsys_minix.obj: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" -c -o libgrub_a-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo" "$(DEPDIR)/libgrub_a-fsys_minix.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='libgrub_a-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi` - -libgrub_a-fsys_reiserfs.o: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" -c -o libgrub_a-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='libgrub_a-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c - -libgrub_a-fsys_reiserfs.obj: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" -c -o libgrub_a-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='libgrub_a-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi` - -libgrub_a-fsys_ufs2.o: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" -c -o libgrub_a-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" "$(DEPDIR)/libgrub_a-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='libgrub_a-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c - -libgrub_a-fsys_ufs2.obj: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" -c -o libgrub_a-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo" "$(DEPDIR)/libgrub_a-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='libgrub_a-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi` - -libgrub_a-fsys_vstafs.o: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" -c -o libgrub_a-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" "$(DEPDIR)/libgrub_a-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='libgrub_a-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c - -libgrub_a-fsys_vstafs.obj: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" -c -o libgrub_a-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo" "$(DEPDIR)/libgrub_a-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='libgrub_a-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi` - -libgrub_a-fsys_xfs.o: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" -c -o libgrub_a-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_xfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='libgrub_a-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c - -libgrub_a-fsys_xfs.obj: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" -c -o libgrub_a-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo" "$(DEPDIR)/libgrub_a-fsys_xfs.Po"; else rm -f "$(DEPDIR)/libgrub_a-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='libgrub_a-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi` - -libgrub_a-gunzip.o: gunzip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-gunzip.o -MD -MP -MF "$(DEPDIR)/libgrub_a-gunzip.Tpo" -c -o libgrub_a-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-gunzip.Tpo" "$(DEPDIR)/libgrub_a-gunzip.Po"; else rm -f "$(DEPDIR)/libgrub_a-gunzip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='libgrub_a-gunzip.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c - -libgrub_a-gunzip.obj: gunzip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-gunzip.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-gunzip.Tpo" -c -o libgrub_a-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-gunzip.Tpo" "$(DEPDIR)/libgrub_a-gunzip.Po"; else rm -f "$(DEPDIR)/libgrub_a-gunzip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='libgrub_a-gunzip.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi` - -libgrub_a-md5.o: md5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-md5.o -MD -MP -MF "$(DEPDIR)/libgrub_a-md5.Tpo" -c -o libgrub_a-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-md5.Tpo" "$(DEPDIR)/libgrub_a-md5.Po"; else rm -f "$(DEPDIR)/libgrub_a-md5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='libgrub_a-md5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c - -libgrub_a-md5.obj: md5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-md5.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-md5.Tpo" -c -o libgrub_a-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-md5.Tpo" "$(DEPDIR)/libgrub_a-md5.Po"; else rm -f "$(DEPDIR)/libgrub_a-md5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='libgrub_a-md5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi` - -libgrub_a-serial.o: serial.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-serial.o -MD -MP -MF "$(DEPDIR)/libgrub_a-serial.Tpo" -c -o libgrub_a-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-serial.Tpo" "$(DEPDIR)/libgrub_a-serial.Po"; else rm -f "$(DEPDIR)/libgrub_a-serial.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='libgrub_a-serial.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c - -libgrub_a-serial.obj: serial.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-serial.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-serial.Tpo" -c -o libgrub_a-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-serial.Tpo" "$(DEPDIR)/libgrub_a-serial.Po"; else rm -f "$(DEPDIR)/libgrub_a-serial.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='libgrub_a-serial.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi` - -libgrub_a-stage2.o: stage2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-stage2.o -MD -MP -MF "$(DEPDIR)/libgrub_a-stage2.Tpo" -c -o libgrub_a-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-stage2.Tpo" "$(DEPDIR)/libgrub_a-stage2.Po"; else rm -f "$(DEPDIR)/libgrub_a-stage2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='libgrub_a-stage2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c - -libgrub_a-stage2.obj: stage2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-stage2.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-stage2.Tpo" -c -o libgrub_a-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-stage2.Tpo" "$(DEPDIR)/libgrub_a-stage2.Po"; else rm -f "$(DEPDIR)/libgrub_a-stage2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='libgrub_a-stage2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi` - -libgrub_a-terminfo.o: terminfo.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-terminfo.o -MD -MP -MF "$(DEPDIR)/libgrub_a-terminfo.Tpo" -c -o libgrub_a-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-terminfo.Tpo" "$(DEPDIR)/libgrub_a-terminfo.Po"; else rm -f "$(DEPDIR)/libgrub_a-terminfo.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='libgrub_a-terminfo.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c - -libgrub_a-terminfo.obj: terminfo.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-terminfo.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-terminfo.Tpo" -c -o libgrub_a-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-terminfo.Tpo" "$(DEPDIR)/libgrub_a-terminfo.Po"; else rm -f "$(DEPDIR)/libgrub_a-terminfo.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='libgrub_a-terminfo.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi` - -libgrub_a-tparm.o: tparm.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-tparm.o -MD -MP -MF "$(DEPDIR)/libgrub_a-tparm.Tpo" -c -o libgrub_a-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-tparm.Tpo" "$(DEPDIR)/libgrub_a-tparm.Po"; else rm -f "$(DEPDIR)/libgrub_a-tparm.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='libgrub_a-tparm.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c - -libgrub_a-tparm.obj: tparm.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -MT libgrub_a-tparm.obj -MD -MP -MF "$(DEPDIR)/libgrub_a-tparm.Tpo" -c -o libgrub_a-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/libgrub_a-tparm.Tpo" "$(DEPDIR)/libgrub_a-tparm.Po"; else rm -f "$(DEPDIR)/libgrub_a-tparm.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='libgrub_a-tparm.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libgrub_a_CFLAGS) $(CFLAGS) -c -o libgrub_a-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi` - -diskless_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-bios.o -MD -MP -MF "$(DEPDIR)/diskless_exec-bios.Tpo" -c -o diskless_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-bios.Tpo" "$(DEPDIR)/diskless_exec-bios.Po"; else rm -f "$(DEPDIR)/diskless_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='diskless_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -diskless_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-bios.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-bios.Tpo" -c -o diskless_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-bios.Tpo" "$(DEPDIR)/diskless_exec-bios.Po"; else rm -f "$(DEPDIR)/diskless_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='diskless_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -diskless_exec-boot.o: boot.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-boot.o -MD -MP -MF "$(DEPDIR)/diskless_exec-boot.Tpo" -c -o diskless_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-boot.Tpo" "$(DEPDIR)/diskless_exec-boot.Po"; else rm -f "$(DEPDIR)/diskless_exec-boot.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='diskless_exec-boot.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c - -diskless_exec-boot.obj: boot.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-boot.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-boot.Tpo" -c -o diskless_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-boot.Tpo" "$(DEPDIR)/diskless_exec-boot.Po"; else rm -f "$(DEPDIR)/diskless_exec-boot.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='diskless_exec-boot.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi` - -diskless_exec-builtins.o: builtins.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-builtins.o -MD -MP -MF "$(DEPDIR)/diskless_exec-builtins.Tpo" -c -o diskless_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-builtins.Tpo" "$(DEPDIR)/diskless_exec-builtins.Po"; else rm -f "$(DEPDIR)/diskless_exec-builtins.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='diskless_exec-builtins.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c - -diskless_exec-builtins.obj: builtins.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-builtins.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-builtins.Tpo" -c -o diskless_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-builtins.Tpo" "$(DEPDIR)/diskless_exec-builtins.Po"; else rm -f "$(DEPDIR)/diskless_exec-builtins.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='diskless_exec-builtins.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi` - -diskless_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-char_io.o -MD -MP -MF "$(DEPDIR)/diskless_exec-char_io.Tpo" -c -o diskless_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-char_io.Tpo" "$(DEPDIR)/diskless_exec-char_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='diskless_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -diskless_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-char_io.Tpo" -c -o diskless_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-char_io.Tpo" "$(DEPDIR)/diskless_exec-char_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='diskless_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -diskless_exec-cmdline.o: cmdline.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-cmdline.o -MD -MP -MF "$(DEPDIR)/diskless_exec-cmdline.Tpo" -c -o diskless_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-cmdline.Tpo" "$(DEPDIR)/diskless_exec-cmdline.Po"; else rm -f "$(DEPDIR)/diskless_exec-cmdline.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='diskless_exec-cmdline.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c - -diskless_exec-cmdline.obj: cmdline.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-cmdline.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-cmdline.Tpo" -c -o diskless_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-cmdline.Tpo" "$(DEPDIR)/diskless_exec-cmdline.Po"; else rm -f "$(DEPDIR)/diskless_exec-cmdline.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='diskless_exec-cmdline.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi` - -diskless_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-common.o -MD -MP -MF "$(DEPDIR)/diskless_exec-common.Tpo" -c -o diskless_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-common.Tpo" "$(DEPDIR)/diskless_exec-common.Po"; else rm -f "$(DEPDIR)/diskless_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='diskless_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -diskless_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-common.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-common.Tpo" -c -o diskless_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-common.Tpo" "$(DEPDIR)/diskless_exec-common.Po"; else rm -f "$(DEPDIR)/diskless_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='diskless_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -diskless_exec-console.o: console.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-console.o -MD -MP -MF "$(DEPDIR)/diskless_exec-console.Tpo" -c -o diskless_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-console.Tpo" "$(DEPDIR)/diskless_exec-console.Po"; else rm -f "$(DEPDIR)/diskless_exec-console.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='diskless_exec-console.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c - -diskless_exec-console.obj: console.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-console.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-console.Tpo" -c -o diskless_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-console.Tpo" "$(DEPDIR)/diskless_exec-console.Po"; else rm -f "$(DEPDIR)/diskless_exec-console.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='diskless_exec-console.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi` - -diskless_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/diskless_exec-disk_io.Tpo" -c -o diskless_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-disk_io.Tpo" "$(DEPDIR)/diskless_exec-disk_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='diskless_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -diskless_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-disk_io.Tpo" -c -o diskless_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-disk_io.Tpo" "$(DEPDIR)/diskless_exec-disk_io.Po"; else rm -f "$(DEPDIR)/diskless_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='diskless_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -diskless_exec-fsys_ext2fs.o: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" -c -o diskless_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='diskless_exec-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c - -diskless_exec-fsys_ext2fs.obj: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" -c -o diskless_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='diskless_exec-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi` - -diskless_exec-fsys_fat.o: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_fat.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" -c -o diskless_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" "$(DEPDIR)/diskless_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='diskless_exec-fsys_fat.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c - -diskless_exec-fsys_fat.obj: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" -c -o diskless_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo" "$(DEPDIR)/diskless_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='diskless_exec-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi` - -diskless_exec-fsys_ffs.o: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" -c -o diskless_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='diskless_exec-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c - -diskless_exec-fsys_ffs.obj: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" -c -o diskless_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo" "$(DEPDIR)/diskless_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='diskless_exec-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi` - -diskless_exec-fsys_iso9660.o: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" -c -o diskless_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" "$(DEPDIR)/diskless_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='diskless_exec-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c - -diskless_exec-fsys_iso9660.obj: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" -c -o diskless_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo" "$(DEPDIR)/diskless_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='diskless_exec-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi` - -diskless_exec-fsys_jfs.o: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" -c -o diskless_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='diskless_exec-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c - -diskless_exec-fsys_jfs.obj: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" -c -o diskless_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='diskless_exec-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi` - -diskless_exec-fsys_minix.o: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_minix.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" -c -o diskless_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" "$(DEPDIR)/diskless_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='diskless_exec-fsys_minix.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c - -diskless_exec-fsys_minix.obj: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" -c -o diskless_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo" "$(DEPDIR)/diskless_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='diskless_exec-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi` - -diskless_exec-fsys_reiserfs.o: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" -c -o diskless_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='diskless_exec-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c - -diskless_exec-fsys_reiserfs.obj: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" -c -o diskless_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='diskless_exec-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi` - -diskless_exec-fsys_ufs2.o: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" -c -o diskless_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" "$(DEPDIR)/diskless_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='diskless_exec-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c - -diskless_exec-fsys_ufs2.obj: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" -c -o diskless_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo" "$(DEPDIR)/diskless_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='diskless_exec-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi` - -diskless_exec-fsys_vstafs.o: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" -c -o diskless_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" "$(DEPDIR)/diskless_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='diskless_exec-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c - -diskless_exec-fsys_vstafs.obj: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" -c -o diskless_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo" "$(DEPDIR)/diskless_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='diskless_exec-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi` - -diskless_exec-fsys_xfs.o: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" -c -o diskless_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='diskless_exec-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c - -diskless_exec-fsys_xfs.obj: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" -c -o diskless_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo" "$(DEPDIR)/diskless_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/diskless_exec-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='diskless_exec-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi` - -diskless_exec-gunzip.o: gunzip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-gunzip.o -MD -MP -MF "$(DEPDIR)/diskless_exec-gunzip.Tpo" -c -o diskless_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-gunzip.Tpo" "$(DEPDIR)/diskless_exec-gunzip.Po"; else rm -f "$(DEPDIR)/diskless_exec-gunzip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='diskless_exec-gunzip.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c - -diskless_exec-gunzip.obj: gunzip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-gunzip.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-gunzip.Tpo" -c -o diskless_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-gunzip.Tpo" "$(DEPDIR)/diskless_exec-gunzip.Po"; else rm -f "$(DEPDIR)/diskless_exec-gunzip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='diskless_exec-gunzip.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi` - -diskless_exec-hercules.o: hercules.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-hercules.o -MD -MP -MF "$(DEPDIR)/diskless_exec-hercules.Tpo" -c -o diskless_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-hercules.Tpo" "$(DEPDIR)/diskless_exec-hercules.Po"; else rm -f "$(DEPDIR)/diskless_exec-hercules.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='diskless_exec-hercules.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c - -diskless_exec-hercules.obj: hercules.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-hercules.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-hercules.Tpo" -c -o diskless_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-hercules.Tpo" "$(DEPDIR)/diskless_exec-hercules.Po"; else rm -f "$(DEPDIR)/diskless_exec-hercules.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='diskless_exec-hercules.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi` - -diskless_exec-md5.o: md5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-md5.o -MD -MP -MF "$(DEPDIR)/diskless_exec-md5.Tpo" -c -o diskless_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-md5.Tpo" "$(DEPDIR)/diskless_exec-md5.Po"; else rm -f "$(DEPDIR)/diskless_exec-md5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='diskless_exec-md5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c - -diskless_exec-md5.obj: md5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-md5.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-md5.Tpo" -c -o diskless_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-md5.Tpo" "$(DEPDIR)/diskless_exec-md5.Po"; else rm -f "$(DEPDIR)/diskless_exec-md5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='diskless_exec-md5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi` - -diskless_exec-serial.o: serial.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-serial.o -MD -MP -MF "$(DEPDIR)/diskless_exec-serial.Tpo" -c -o diskless_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-serial.Tpo" "$(DEPDIR)/diskless_exec-serial.Po"; else rm -f "$(DEPDIR)/diskless_exec-serial.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='diskless_exec-serial.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c - -diskless_exec-serial.obj: serial.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-serial.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-serial.Tpo" -c -o diskless_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-serial.Tpo" "$(DEPDIR)/diskless_exec-serial.Po"; else rm -f "$(DEPDIR)/diskless_exec-serial.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='diskless_exec-serial.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi` - -diskless_exec-smp-imps.o: smp-imps.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-smp-imps.o -MD -MP -MF "$(DEPDIR)/diskless_exec-smp-imps.Tpo" -c -o diskless_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo" "$(DEPDIR)/diskless_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='diskless_exec-smp-imps.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c - -diskless_exec-smp-imps.obj: smp-imps.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-smp-imps.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-smp-imps.Tpo" -c -o diskless_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo" "$(DEPDIR)/diskless_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/diskless_exec-smp-imps.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='diskless_exec-smp-imps.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi` - -diskless_exec-stage2.o: stage2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-stage2.o -MD -MP -MF "$(DEPDIR)/diskless_exec-stage2.Tpo" -c -o diskless_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-stage2.Tpo" "$(DEPDIR)/diskless_exec-stage2.Po"; else rm -f "$(DEPDIR)/diskless_exec-stage2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='diskless_exec-stage2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c - -diskless_exec-stage2.obj: stage2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-stage2.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-stage2.Tpo" -c -o diskless_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-stage2.Tpo" "$(DEPDIR)/diskless_exec-stage2.Po"; else rm -f "$(DEPDIR)/diskless_exec-stage2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='diskless_exec-stage2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi` - -diskless_exec-terminfo.o: terminfo.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-terminfo.o -MD -MP -MF "$(DEPDIR)/diskless_exec-terminfo.Tpo" -c -o diskless_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-terminfo.Tpo" "$(DEPDIR)/diskless_exec-terminfo.Po"; else rm -f "$(DEPDIR)/diskless_exec-terminfo.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='diskless_exec-terminfo.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c - -diskless_exec-terminfo.obj: terminfo.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-terminfo.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-terminfo.Tpo" -c -o diskless_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-terminfo.Tpo" "$(DEPDIR)/diskless_exec-terminfo.Po"; else rm -f "$(DEPDIR)/diskless_exec-terminfo.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='diskless_exec-terminfo.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi` - -diskless_exec-tparm.o: tparm.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-tparm.o -MD -MP -MF "$(DEPDIR)/diskless_exec-tparm.Tpo" -c -o diskless_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-tparm.Tpo" "$(DEPDIR)/diskless_exec-tparm.Po"; else rm -f "$(DEPDIR)/diskless_exec-tparm.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='diskless_exec-tparm.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c - -diskless_exec-tparm.obj: tparm.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -MT diskless_exec-tparm.obj -MD -MP -MF "$(DEPDIR)/diskless_exec-tparm.Tpo" -c -o diskless_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/diskless_exec-tparm.Tpo" "$(DEPDIR)/diskless_exec-tparm.Po"; else rm -f "$(DEPDIR)/diskless_exec-tparm.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='diskless_exec-tparm.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(diskless_exec_CFLAGS) $(CFLAGS) -c -o diskless_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi` - -e2fs_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" -c -o e2fs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='e2fs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -e2fs_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" -c -o e2fs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='e2fs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -e2fs_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" -c -o e2fs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='e2fs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -e2fs_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" -c -o e2fs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='e2fs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -e2fs_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" -c -o e2fs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='e2fs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -e2fs_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" -c -o e2fs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='e2fs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -e2fs_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" -c -o e2fs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='e2fs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -e2fs_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" -c -o e2fs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='e2fs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -e2fs_stage1_5_exec-fsys_ext2fs.o: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" -c -o e2fs_stage1_5_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='e2fs_stage1_5_exec-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c - -e2fs_stage1_5_exec-fsys_ext2fs.obj: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" -c -o e2fs_stage1_5_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='e2fs_stage1_5_exec-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi` - -e2fs_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" -c -o e2fs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='e2fs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -e2fs_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT e2fs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" -c -o e2fs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/e2fs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/e2fs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='e2fs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(e2fs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o e2fs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -fat_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" -c -o fat_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" "$(DEPDIR)/fat_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='fat_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -fat_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" -c -o fat_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo" "$(DEPDIR)/fat_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='fat_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -fat_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" -c -o fat_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='fat_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -fat_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" -c -o fat_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='fat_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -fat_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" -c -o fat_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='fat_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -fat_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" -c -o fat_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/fat_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='fat_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -fat_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" -c -o fat_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='fat_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -fat_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" -c -o fat_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='fat_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -fat_stage1_5_exec-fsys_fat.o: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-fsys_fat.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" -c -o fat_stage1_5_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='fat_stage1_5_exec-fsys_fat.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c - -fat_stage1_5_exec-fsys_fat.obj: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" -c -o fat_stage1_5_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo" "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='fat_stage1_5_exec-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi` - -fat_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" -c -o fat_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" "$(DEPDIR)/fat_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='fat_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -fat_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -MT fat_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" -c -o fat_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo" "$(DEPDIR)/fat_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/fat_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='fat_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(fat_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o fat_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -ffs_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" -c -o ffs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ffs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -ffs_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" -c -o ffs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ffs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -ffs_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" -c -o ffs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ffs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -ffs_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" -c -o ffs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ffs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -ffs_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" -c -o ffs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ffs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -ffs_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" -c -o ffs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ffs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -ffs_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" -c -o ffs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ffs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -ffs_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" -c -o ffs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ffs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -ffs_stage1_5_exec-fsys_ffs.o: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" -c -o ffs_stage1_5_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='ffs_stage1_5_exec-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c - -ffs_stage1_5_exec-fsys_ffs.obj: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" -c -o ffs_stage1_5_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='ffs_stage1_5_exec-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi` - -ffs_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" -c -o ffs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ffs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -ffs_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ffs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" -c -o ffs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ffs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ffs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ffs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ffs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ffs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -iso9660_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" -c -o iso9660_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='iso9660_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -iso9660_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" -c -o iso9660_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='iso9660_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -iso9660_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" -c -o iso9660_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='iso9660_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -iso9660_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" -c -o iso9660_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='iso9660_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -iso9660_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" -c -o iso9660_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='iso9660_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -iso9660_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" -c -o iso9660_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='iso9660_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -iso9660_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" -c -o iso9660_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='iso9660_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -iso9660_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" -c -o iso9660_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='iso9660_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -iso9660_stage1_5_exec-fsys_iso9660.o: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" -c -o iso9660_stage1_5_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='iso9660_stage1_5_exec-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c - -iso9660_stage1_5_exec-fsys_iso9660.obj: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" -c -o iso9660_stage1_5_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='iso9660_stage1_5_exec-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi` - -iso9660_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" -c -o iso9660_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='iso9660_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -iso9660_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -MT iso9660_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" -c -o iso9660_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo" "$(DEPDIR)/iso9660_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/iso9660_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='iso9660_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(iso9660_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o iso9660_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -jfs_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" -c -o jfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='jfs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -jfs_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" -c -o jfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='jfs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -jfs_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" -c -o jfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='jfs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -jfs_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" -c -o jfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='jfs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -jfs_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" -c -o jfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='jfs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -jfs_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" -c -o jfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='jfs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -jfs_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" -c -o jfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='jfs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -jfs_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" -c -o jfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='jfs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -jfs_stage1_5_exec-fsys_jfs.o: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" -c -o jfs_stage1_5_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='jfs_stage1_5_exec-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c - -jfs_stage1_5_exec-fsys_jfs.obj: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" -c -o jfs_stage1_5_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='jfs_stage1_5_exec-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi` - -jfs_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" -c -o jfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='jfs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -jfs_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT jfs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" -c -o jfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/jfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/jfs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='jfs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(jfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o jfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -minix_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" -c -o minix_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" "$(DEPDIR)/minix_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='minix_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -minix_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" -c -o minix_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo" "$(DEPDIR)/minix_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='minix_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -minix_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" -c -o minix_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='minix_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -minix_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" -c -o minix_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='minix_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -minix_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" -c -o minix_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='minix_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -minix_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" -c -o minix_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/minix_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='minix_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -minix_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" -c -o minix_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='minix_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -minix_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" -c -o minix_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='minix_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -minix_stage1_5_exec-fsys_minix.o: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-fsys_minix.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" -c -o minix_stage1_5_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='minix_stage1_5_exec-fsys_minix.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c - -minix_stage1_5_exec-fsys_minix.obj: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" -c -o minix_stage1_5_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo" "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='minix_stage1_5_exec-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi` - -minix_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" -c -o minix_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" "$(DEPDIR)/minix_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='minix_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -minix_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -MT minix_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" -c -o minix_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo" "$(DEPDIR)/minix_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/minix_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='minix_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(minix_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o minix_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -pre_stage2_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-bios.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-bios.Tpo" -c -o pre_stage2_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo" "$(DEPDIR)/pre_stage2_exec-bios.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='pre_stage2_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -pre_stage2_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-bios.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-bios.Tpo" -c -o pre_stage2_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo" "$(DEPDIR)/pre_stage2_exec-bios.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='pre_stage2_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -pre_stage2_exec-boot.o: boot.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-boot.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-boot.Tpo" -c -o pre_stage2_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo" "$(DEPDIR)/pre_stage2_exec-boot.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='pre_stage2_exec-boot.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-boot.o `test -f 'boot.c' || echo '$(srcdir)/'`boot.c - -pre_stage2_exec-boot.obj: boot.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-boot.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-boot.Tpo" -c -o pre_stage2_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo" "$(DEPDIR)/pre_stage2_exec-boot.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-boot.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='boot.c' object='pre_stage2_exec-boot.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-boot.obj `if test -f 'boot.c'; then $(CYGPATH_W) 'boot.c'; else $(CYGPATH_W) '$(srcdir)/boot.c'; fi` - -pre_stage2_exec-builtins.o: builtins.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-builtins.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" -c -o pre_stage2_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" "$(DEPDIR)/pre_stage2_exec-builtins.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='pre_stage2_exec-builtins.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-builtins.o `test -f 'builtins.c' || echo '$(srcdir)/'`builtins.c - -pre_stage2_exec-builtins.obj: builtins.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-builtins.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" -c -o pre_stage2_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo" "$(DEPDIR)/pre_stage2_exec-builtins.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-builtins.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='builtins.c' object='pre_stage2_exec-builtins.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-builtins.obj `if test -f 'builtins.c'; then $(CYGPATH_W) 'builtins.c'; else $(CYGPATH_W) '$(srcdir)/builtins.c'; fi` - -pre_stage2_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-char_io.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" -c -o pre_stage2_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" "$(DEPDIR)/pre_stage2_exec-char_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='pre_stage2_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -pre_stage2_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" -c -o pre_stage2_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo" "$(DEPDIR)/pre_stage2_exec-char_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='pre_stage2_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -pre_stage2_exec-cmdline.o: cmdline.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-cmdline.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" -c -o pre_stage2_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" "$(DEPDIR)/pre_stage2_exec-cmdline.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='pre_stage2_exec-cmdline.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-cmdline.o `test -f 'cmdline.c' || echo '$(srcdir)/'`cmdline.c - -pre_stage2_exec-cmdline.obj: cmdline.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-cmdline.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" -c -o pre_stage2_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo" "$(DEPDIR)/pre_stage2_exec-cmdline.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-cmdline.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='cmdline.c' object='pre_stage2_exec-cmdline.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-cmdline.obj `if test -f 'cmdline.c'; then $(CYGPATH_W) 'cmdline.c'; else $(CYGPATH_W) '$(srcdir)/cmdline.c'; fi` - -pre_stage2_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-common.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-common.Tpo" -c -o pre_stage2_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-common.Tpo" "$(DEPDIR)/pre_stage2_exec-common.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='pre_stage2_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -pre_stage2_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-common.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-common.Tpo" -c -o pre_stage2_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-common.Tpo" "$(DEPDIR)/pre_stage2_exec-common.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='pre_stage2_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -pre_stage2_exec-console.o: console.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-console.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-console.Tpo" -c -o pre_stage2_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-console.Tpo" "$(DEPDIR)/pre_stage2_exec-console.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-console.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='pre_stage2_exec-console.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-console.o `test -f 'console.c' || echo '$(srcdir)/'`console.c - -pre_stage2_exec-console.obj: console.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-console.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-console.Tpo" -c -o pre_stage2_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-console.Tpo" "$(DEPDIR)/pre_stage2_exec-console.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-console.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='console.c' object='pre_stage2_exec-console.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-console.obj `if test -f 'console.c'; then $(CYGPATH_W) 'console.c'; else $(CYGPATH_W) '$(srcdir)/console.c'; fi` - -pre_stage2_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" -c -o pre_stage2_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" "$(DEPDIR)/pre_stage2_exec-disk_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='pre_stage2_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -pre_stage2_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" -c -o pre_stage2_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo" "$(DEPDIR)/pre_stage2_exec-disk_io.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='pre_stage2_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -pre_stage2_exec-fsys_ext2fs.o: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ext2fs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" -c -o pre_stage2_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='pre_stage2_exec-fsys_ext2fs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ext2fs.o `test -f 'fsys_ext2fs.c' || echo '$(srcdir)/'`fsys_ext2fs.c - -pre_stage2_exec-fsys_ext2fs.obj: fsys_ext2fs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ext2fs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" -c -o pre_stage2_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ext2fs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ext2fs.c' object='pre_stage2_exec-fsys_ext2fs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ext2fs.obj `if test -f 'fsys_ext2fs.c'; then $(CYGPATH_W) 'fsys_ext2fs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ext2fs.c'; fi` - -pre_stage2_exec-fsys_fat.o: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_fat.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" -c -o pre_stage2_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='pre_stage2_exec-fsys_fat.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_fat.o `test -f 'fsys_fat.c' || echo '$(srcdir)/'`fsys_fat.c - -pre_stage2_exec-fsys_fat.obj: fsys_fat.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_fat.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" -c -o pre_stage2_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_fat.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_fat.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_fat.c' object='pre_stage2_exec-fsys_fat.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_fat.obj `if test -f 'fsys_fat.c'; then $(CYGPATH_W) 'fsys_fat.c'; else $(CYGPATH_W) '$(srcdir)/fsys_fat.c'; fi` - -pre_stage2_exec-fsys_ffs.o: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ffs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" -c -o pre_stage2_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='pre_stage2_exec-fsys_ffs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ffs.o `test -f 'fsys_ffs.c' || echo '$(srcdir)/'`fsys_ffs.c - -pre_stage2_exec-fsys_ffs.obj: fsys_ffs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ffs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" -c -o pre_stage2_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ffs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ffs.c' object='pre_stage2_exec-fsys_ffs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ffs.obj `if test -f 'fsys_ffs.c'; then $(CYGPATH_W) 'fsys_ffs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ffs.c'; fi` - -pre_stage2_exec-fsys_iso9660.o: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_iso9660.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" -c -o pre_stage2_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='pre_stage2_exec-fsys_iso9660.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_iso9660.o `test -f 'fsys_iso9660.c' || echo '$(srcdir)/'`fsys_iso9660.c - -pre_stage2_exec-fsys_iso9660.obj: fsys_iso9660.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_iso9660.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" -c -o pre_stage2_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_iso9660.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_iso9660.c' object='pre_stage2_exec-fsys_iso9660.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_iso9660.obj `if test -f 'fsys_iso9660.c'; then $(CYGPATH_W) 'fsys_iso9660.c'; else $(CYGPATH_W) '$(srcdir)/fsys_iso9660.c'; fi` - -pre_stage2_exec-fsys_jfs.o: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_jfs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" -c -o pre_stage2_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='pre_stage2_exec-fsys_jfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_jfs.o `test -f 'fsys_jfs.c' || echo '$(srcdir)/'`fsys_jfs.c - -pre_stage2_exec-fsys_jfs.obj: fsys_jfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_jfs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" -c -o pre_stage2_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_jfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_jfs.c' object='pre_stage2_exec-fsys_jfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_jfs.obj `if test -f 'fsys_jfs.c'; then $(CYGPATH_W) 'fsys_jfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_jfs.c'; fi` - -pre_stage2_exec-fsys_minix.o: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_minix.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" -c -o pre_stage2_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='pre_stage2_exec-fsys_minix.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_minix.o `test -f 'fsys_minix.c' || echo '$(srcdir)/'`fsys_minix.c - -pre_stage2_exec-fsys_minix.obj: fsys_minix.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_minix.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" -c -o pre_stage2_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_minix.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_minix.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_minix.c' object='pre_stage2_exec-fsys_minix.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_minix.obj `if test -f 'fsys_minix.c'; then $(CYGPATH_W) 'fsys_minix.c'; else $(CYGPATH_W) '$(srcdir)/fsys_minix.c'; fi` - -pre_stage2_exec-fsys_reiserfs.o: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" -c -o pre_stage2_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='pre_stage2_exec-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c - -pre_stage2_exec-fsys_reiserfs.obj: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" -c -o pre_stage2_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='pre_stage2_exec-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi` - -pre_stage2_exec-fsys_ufs2.o: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" -c -o pre_stage2_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='pre_stage2_exec-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c - -pre_stage2_exec-fsys_ufs2.obj: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" -c -o pre_stage2_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='pre_stage2_exec-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi` - -pre_stage2_exec-fsys_vstafs.o: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" -c -o pre_stage2_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='pre_stage2_exec-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c - -pre_stage2_exec-fsys_vstafs.obj: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" -c -o pre_stage2_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='pre_stage2_exec-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi` - -pre_stage2_exec-fsys_xfs.o: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" -c -o pre_stage2_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='pre_stage2_exec-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c - -pre_stage2_exec-fsys_xfs.obj: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" -c -o pre_stage2_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo" "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='pre_stage2_exec-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi` - -pre_stage2_exec-gunzip.o: gunzip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-gunzip.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" -c -o pre_stage2_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" "$(DEPDIR)/pre_stage2_exec-gunzip.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='pre_stage2_exec-gunzip.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-gunzip.o `test -f 'gunzip.c' || echo '$(srcdir)/'`gunzip.c - -pre_stage2_exec-gunzip.obj: gunzip.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-gunzip.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" -c -o pre_stage2_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo" "$(DEPDIR)/pre_stage2_exec-gunzip.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-gunzip.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gunzip.c' object='pre_stage2_exec-gunzip.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-gunzip.obj `if test -f 'gunzip.c'; then $(CYGPATH_W) 'gunzip.c'; else $(CYGPATH_W) '$(srcdir)/gunzip.c'; fi` - -pre_stage2_exec-hercules.o: hercules.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-hercules.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" -c -o pre_stage2_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" "$(DEPDIR)/pre_stage2_exec-hercules.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='pre_stage2_exec-hercules.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-hercules.o `test -f 'hercules.c' || echo '$(srcdir)/'`hercules.c - -pre_stage2_exec-hercules.obj: hercules.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-hercules.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" -c -o pre_stage2_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo" "$(DEPDIR)/pre_stage2_exec-hercules.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-hercules.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='hercules.c' object='pre_stage2_exec-hercules.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-hercules.obj `if test -f 'hercules.c'; then $(CYGPATH_W) 'hercules.c'; else $(CYGPATH_W) '$(srcdir)/hercules.c'; fi` - -pre_stage2_exec-md5.o: md5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-md5.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-md5.Tpo" -c -o pre_stage2_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo" "$(DEPDIR)/pre_stage2_exec-md5.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='pre_stage2_exec-md5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-md5.o `test -f 'md5.c' || echo '$(srcdir)/'`md5.c - -pre_stage2_exec-md5.obj: md5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-md5.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-md5.Tpo" -c -o pre_stage2_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo" "$(DEPDIR)/pre_stage2_exec-md5.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-md5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='md5.c' object='pre_stage2_exec-md5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-md5.obj `if test -f 'md5.c'; then $(CYGPATH_W) 'md5.c'; else $(CYGPATH_W) '$(srcdir)/md5.c'; fi` - -pre_stage2_exec-serial.o: serial.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-serial.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-serial.Tpo" -c -o pre_stage2_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo" "$(DEPDIR)/pre_stage2_exec-serial.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='pre_stage2_exec-serial.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-serial.o `test -f 'serial.c' || echo '$(srcdir)/'`serial.c - -pre_stage2_exec-serial.obj: serial.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-serial.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-serial.Tpo" -c -o pre_stage2_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo" "$(DEPDIR)/pre_stage2_exec-serial.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-serial.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='serial.c' object='pre_stage2_exec-serial.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-serial.obj `if test -f 'serial.c'; then $(CYGPATH_W) 'serial.c'; else $(CYGPATH_W) '$(srcdir)/serial.c'; fi` - -pre_stage2_exec-smp-imps.o: smp-imps.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-smp-imps.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" -c -o pre_stage2_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" "$(DEPDIR)/pre_stage2_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='pre_stage2_exec-smp-imps.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-smp-imps.o `test -f 'smp-imps.c' || echo '$(srcdir)/'`smp-imps.c - -pre_stage2_exec-smp-imps.obj: smp-imps.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-smp-imps.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" -c -o pre_stage2_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo" "$(DEPDIR)/pre_stage2_exec-smp-imps.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-smp-imps.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='smp-imps.c' object='pre_stage2_exec-smp-imps.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-smp-imps.obj `if test -f 'smp-imps.c'; then $(CYGPATH_W) 'smp-imps.c'; else $(CYGPATH_W) '$(srcdir)/smp-imps.c'; fi` - -pre_stage2_exec-stage2.o: stage2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-stage2.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" -c -o pre_stage2_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" "$(DEPDIR)/pre_stage2_exec-stage2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='pre_stage2_exec-stage2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-stage2.o `test -f 'stage2.c' || echo '$(srcdir)/'`stage2.c - -pre_stage2_exec-stage2.obj: stage2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-stage2.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" -c -o pre_stage2_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo" "$(DEPDIR)/pre_stage2_exec-stage2.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-stage2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage2.c' object='pre_stage2_exec-stage2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-stage2.obj `if test -f 'stage2.c'; then $(CYGPATH_W) 'stage2.c'; else $(CYGPATH_W) '$(srcdir)/stage2.c'; fi` - -pre_stage2_exec-terminfo.o: terminfo.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-terminfo.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" -c -o pre_stage2_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" "$(DEPDIR)/pre_stage2_exec-terminfo.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='pre_stage2_exec-terminfo.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-terminfo.o `test -f 'terminfo.c' || echo '$(srcdir)/'`terminfo.c - -pre_stage2_exec-terminfo.obj: terminfo.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-terminfo.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" -c -o pre_stage2_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo" "$(DEPDIR)/pre_stage2_exec-terminfo.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-terminfo.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='terminfo.c' object='pre_stage2_exec-terminfo.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-terminfo.obj `if test -f 'terminfo.c'; then $(CYGPATH_W) 'terminfo.c'; else $(CYGPATH_W) '$(srcdir)/terminfo.c'; fi` - -pre_stage2_exec-tparm.o: tparm.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-tparm.o -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" -c -o pre_stage2_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" "$(DEPDIR)/pre_stage2_exec-tparm.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='pre_stage2_exec-tparm.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-tparm.o `test -f 'tparm.c' || echo '$(srcdir)/'`tparm.c - -pre_stage2_exec-tparm.obj: tparm.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -MT pre_stage2_exec-tparm.obj -MD -MP -MF "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" -c -o pre_stage2_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo" "$(DEPDIR)/pre_stage2_exec-tparm.Po"; else rm -f "$(DEPDIR)/pre_stage2_exec-tparm.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='tparm.c' object='pre_stage2_exec-tparm.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pre_stage2_exec_CFLAGS) $(CFLAGS) -c -o pre_stage2_exec-tparm.obj `if test -f 'tparm.c'; then $(CYGPATH_W) 'tparm.c'; else $(CYGPATH_W) '$(srcdir)/tparm.c'; fi` - -reiserfs_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" -c -o reiserfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='reiserfs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -reiserfs_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" -c -o reiserfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='reiserfs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -reiserfs_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" -c -o reiserfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='reiserfs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -reiserfs_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" -c -o reiserfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='reiserfs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -reiserfs_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" -c -o reiserfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='reiserfs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -reiserfs_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" -c -o reiserfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='reiserfs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -reiserfs_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" -c -o reiserfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='reiserfs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -reiserfs_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" -c -o reiserfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='reiserfs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -reiserfs_stage1_5_exec-fsys_reiserfs.o: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-fsys_reiserfs.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" -c -o reiserfs_stage1_5_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='reiserfs_stage1_5_exec-fsys_reiserfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-fsys_reiserfs.o `test -f 'fsys_reiserfs.c' || echo '$(srcdir)/'`fsys_reiserfs.c - -reiserfs_stage1_5_exec-fsys_reiserfs.obj: fsys_reiserfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-fsys_reiserfs.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" -c -o reiserfs_stage1_5_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-fsys_reiserfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_reiserfs.c' object='reiserfs_stage1_5_exec-fsys_reiserfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-fsys_reiserfs.obj `if test -f 'fsys_reiserfs.c'; then $(CYGPATH_W) 'fsys_reiserfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_reiserfs.c'; fi` - -reiserfs_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" -c -o reiserfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='reiserfs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -reiserfs_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT reiserfs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" -c -o reiserfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/reiserfs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='reiserfs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(reiserfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o reiserfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -ufs2_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" -c -o ufs2_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ufs2_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -ufs2_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" -c -o ufs2_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='ufs2_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -ufs2_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" -c -o ufs2_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ufs2_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -ufs2_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" -c -o ufs2_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='ufs2_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -ufs2_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" -c -o ufs2_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ufs2_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -ufs2_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" -c -o ufs2_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='ufs2_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -ufs2_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" -c -o ufs2_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ufs2_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -ufs2_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" -c -o ufs2_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='ufs2_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -ufs2_stage1_5_exec-fsys_ufs2.o: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-fsys_ufs2.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" -c -o ufs2_stage1_5_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='ufs2_stage1_5_exec-fsys_ufs2.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-fsys_ufs2.o `test -f 'fsys_ufs2.c' || echo '$(srcdir)/'`fsys_ufs2.c - -ufs2_stage1_5_exec-fsys_ufs2.obj: fsys_ufs2.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-fsys_ufs2.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" -c -o ufs2_stage1_5_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-fsys_ufs2.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_ufs2.c' object='ufs2_stage1_5_exec-fsys_ufs2.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-fsys_ufs2.obj `if test -f 'fsys_ufs2.c'; then $(CYGPATH_W) 'fsys_ufs2.c'; else $(CYGPATH_W) '$(srcdir)/fsys_ufs2.c'; fi` - -ufs2_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" -c -o ufs2_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ufs2_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -ufs2_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -MT ufs2_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" -c -o ufs2_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo" "$(DEPDIR)/ufs2_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/ufs2_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='ufs2_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(ufs2_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o ufs2_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -vstafs_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" -c -o vstafs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='vstafs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -vstafs_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" -c -o vstafs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='vstafs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -vstafs_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" -c -o vstafs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='vstafs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -vstafs_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" -c -o vstafs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='vstafs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -vstafs_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" -c -o vstafs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='vstafs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -vstafs_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" -c -o vstafs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='vstafs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -vstafs_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" -c -o vstafs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='vstafs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -vstafs_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" -c -o vstafs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='vstafs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -vstafs_stage1_5_exec-fsys_vstafs.o: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-fsys_vstafs.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" -c -o vstafs_stage1_5_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='vstafs_stage1_5_exec-fsys_vstafs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-fsys_vstafs.o `test -f 'fsys_vstafs.c' || echo '$(srcdir)/'`fsys_vstafs.c - -vstafs_stage1_5_exec-fsys_vstafs.obj: fsys_vstafs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-fsys_vstafs.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" -c -o vstafs_stage1_5_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-fsys_vstafs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_vstafs.c' object='vstafs_stage1_5_exec-fsys_vstafs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-fsys_vstafs.obj `if test -f 'fsys_vstafs.c'; then $(CYGPATH_W) 'fsys_vstafs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_vstafs.c'; fi` - -vstafs_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" -c -o vstafs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='vstafs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -vstafs_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT vstafs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" -c -o vstafs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/vstafs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/vstafs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='vstafs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(vstafs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o vstafs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` - -xfs_stage1_5_exec-common.o: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-common.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" -c -o xfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='xfs_stage1_5_exec-common.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-common.o `test -f 'common.c' || echo '$(srcdir)/'`common.c - -xfs_stage1_5_exec-common.obj: common.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-common.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" -c -o xfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-common.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-common.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='common.c' object='xfs_stage1_5_exec-common.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-common.obj `if test -f 'common.c'; then $(CYGPATH_W) 'common.c'; else $(CYGPATH_W) '$(srcdir)/common.c'; fi` - -xfs_stage1_5_exec-char_io.o: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-char_io.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" -c -o xfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='xfs_stage1_5_exec-char_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-char_io.o `test -f 'char_io.c' || echo '$(srcdir)/'`char_io.c - -xfs_stage1_5_exec-char_io.obj: char_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-char_io.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" -c -o xfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-char_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-char_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='char_io.c' object='xfs_stage1_5_exec-char_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-char_io.obj `if test -f 'char_io.c'; then $(CYGPATH_W) 'char_io.c'; else $(CYGPATH_W) '$(srcdir)/char_io.c'; fi` - -xfs_stage1_5_exec-disk_io.o: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-disk_io.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" -c -o xfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='xfs_stage1_5_exec-disk_io.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-disk_io.o `test -f 'disk_io.c' || echo '$(srcdir)/'`disk_io.c - -xfs_stage1_5_exec-disk_io.obj: disk_io.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-disk_io.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" -c -o xfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-disk_io.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='disk_io.c' object='xfs_stage1_5_exec-disk_io.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-disk_io.obj `if test -f 'disk_io.c'; then $(CYGPATH_W) 'disk_io.c'; else $(CYGPATH_W) '$(srcdir)/disk_io.c'; fi` - -xfs_stage1_5_exec-stage1_5.o: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-stage1_5.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" -c -o xfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='xfs_stage1_5_exec-stage1_5.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-stage1_5.o `test -f 'stage1_5.c' || echo '$(srcdir)/'`stage1_5.c - -xfs_stage1_5_exec-stage1_5.obj: stage1_5.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-stage1_5.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" -c -o xfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-stage1_5.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='stage1_5.c' object='xfs_stage1_5_exec-stage1_5.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-stage1_5.obj `if test -f 'stage1_5.c'; then $(CYGPATH_W) 'stage1_5.c'; else $(CYGPATH_W) '$(srcdir)/stage1_5.c'; fi` - -xfs_stage1_5_exec-fsys_xfs.o: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-fsys_xfs.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" -c -o xfs_stage1_5_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='xfs_stage1_5_exec-fsys_xfs.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-fsys_xfs.o `test -f 'fsys_xfs.c' || echo '$(srcdir)/'`fsys_xfs.c - -xfs_stage1_5_exec-fsys_xfs.obj: fsys_xfs.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-fsys_xfs.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" -c -o xfs_stage1_5_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-fsys_xfs.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='fsys_xfs.c' object='xfs_stage1_5_exec-fsys_xfs.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-fsys_xfs.obj `if test -f 'fsys_xfs.c'; then $(CYGPATH_W) 'fsys_xfs.c'; else $(CYGPATH_W) '$(srcdir)/fsys_xfs.c'; fi` - -xfs_stage1_5_exec-bios.o: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-bios.o -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" -c -o xfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='xfs_stage1_5_exec-bios.o' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-bios.o `test -f 'bios.c' || echo '$(srcdir)/'`bios.c - -xfs_stage1_5_exec-bios.obj: bios.c -@am__fastdepCC_TRUE@ if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -MT xfs_stage1_5_exec-bios.obj -MD -MP -MF "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" -c -o xfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo" "$(DEPDIR)/xfs_stage1_5_exec-bios.Po"; else rm -f "$(DEPDIR)/xfs_stage1_5_exec-bios.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='bios.c' object='xfs_stage1_5_exec-bios.obj' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(xfs_stage1_5_exec_CFLAGS) $(CFLAGS) -c -o xfs_stage1_5_exec-bios.obj `if test -f 'bios.c'; then $(CYGPATH_W) 'bios.c'; else $(CYGPATH_W) '$(srcdir)/bios.c'; fi` -uninstall-info-am: -install-pkglibDATA: $(pkglib_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkglibdir)" - @list='$(pkglib_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(pkglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkglibdir)/$$f'"; \ - $(pkglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkglibdir)/$$f"; \ - done - -uninstall-pkglibDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkglib_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkglibdir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkglibdir)/$$f"; \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; \ - srcdir=$(srcdir); export srcdir; \ - list='$(TESTS)'; \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *" $$tst "*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - echo "XPASS: $$tst"; \ - ;; \ - *) \ - echo "PASS: $$tst"; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *" $$tst "*) \ - xfail=`expr $$xfail + 1`; \ - echo "XFAIL: $$tst"; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - echo "FAIL: $$tst"; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - echo "SKIP: $$tst"; \ - fi; \ - done; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="All $$all tests passed"; \ - else \ - banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all tests failed"; \ - else \ - banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - skipped="($$skip tests were not run)"; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - echo "$$dashes"; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes"; \ - test "$$failed" -eq 0; \ - else :; fi - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(LIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \ - $(HEADERS) -installdirs: - for dir in "$(DESTDIR)$(pkglibdir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-am - -clean-am: clean-generic clean-noinstLIBRARIES clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-exec-am: install-pkglibDATA - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-info-am uninstall-pkglibDATA - -.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ - clean-generic clean-noinstLIBRARIES clean-noinstPROGRAMS ctags \ - distclean distclean-compile distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-pkglibDATA install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \ - ps ps-am tags uninstall uninstall-am uninstall-info-am \ - uninstall-pkglibDATA - - -stage2_size.h: pre_stage2 - -rm -f stage2_size.h - set dummy `ls -l pre_stage2`; \ - echo "#define STAGE2_SIZE $$6" > stage2_size.h - -# XXX: automake doesn't provide a way to specify dependencies for object -# files explicitly, so we must write this by a general Makefile scheme. -# If automake change the naming scheme for per-executable objects, this -# will be broken. -start_exec-start.$(OBJEXT): stage2_size.h - -stage2: pre_stage2 start - -rm -f stage2 - cat start pre_stage2 > stage2 - -start_eltorito_exec-start.$(OBJEXT): stage2_size.h - -stage2_eltorito: pre_stage2 start_eltorito - -rm -f stage2_eltorito - cat start_eltorito pre_stage2 > stage2_eltorito - -diskless_size.h: diskless - -rm -f $@ - set dummy `ls -l $^`; \ - echo "#define DISKLESS_SIZE $$6" > $@ - -# XXX: See the comment for start_exec-start.o. -nbloader_exec-nbloader.$(OBJEXT): diskless_size.h - -# For nbgrub target. -nbgrub: nbloader diskless - -rm -f $@ - cat $^ > $@ - -# XXX: See the comment for start_exec-start.o. -pxeloader_exec-pxeloader.$(OBJEXT): diskless_size.h - -# For pxegrub target. -pxegrub: pxeloader diskless - -rm -f $@ - cat $^ > $@ -.exec: - $(OBJCOPY) -O binary $< $@ -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/util/Makefile.in b/util/Makefile.in deleted file mode 100644 index e700cf774..000000000 --- a/util/Makefile.in +++ /dev/null @@ -1,478 +0,0 @@ -# Makefile.in generated by automake 1.9.4 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -SOURCES = $(mbchk_SOURCES) - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -top_builddir = .. -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -INSTALL = @INSTALL@ -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = mbchk$(EXEEXT) -subdir = util -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/grub-image.in $(srcdir)/grub-install.in \ - $(srcdir)/grub-md5-crypt.in $(srcdir)/grub-set-default.in \ - $(srcdir)/grub-terminfo.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = grub-image grub-install grub-md5-crypt \ - grub-terminfo grub-set-default -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" -binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) -PROGRAMS = $(bin_PROGRAMS) -am_mbchk_OBJECTS = mbchk.$(OBJEXT) -mbchk_OBJECTS = $(am_mbchk_OBJECTS) -mbchk_DEPENDENCIES = ../lib/libcommon.a -sbinSCRIPT_INSTALL = $(INSTALL_SCRIPT) -SCRIPTS = $(noinst_SCRIPTS) $(sbin_SCRIPTS) -DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -SOURCES = $(mbchk_SOURCES) -DIST_SOURCES = $(mbchk_SOURCES) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMDEP_FALSE = @AMDEP_FALSE@ -AMDEP_TRUE = @AMDEP_TRUE@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BUILD_EXAMPLE_KERNEL_FALSE = @BUILD_EXAMPLE_KERNEL_FALSE@ -BUILD_EXAMPLE_KERNEL_TRUE = @BUILD_EXAMPLE_KERNEL_TRUE@ -CC = @CC@ -CCAS = @CCAS@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DISKLESS_SUPPORT_FALSE = @DISKLESS_SUPPORT_FALSE@ -DISKLESS_SUPPORT_TRUE = @DISKLESS_SUPPORT_TRUE@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FSYS_CFLAGS = @FSYS_CFLAGS@ -GRUB_CFLAGS = @GRUB_CFLAGS@ -GRUB_LIBS = @GRUB_LIBS@ -HERCULES_SUPPORT_FALSE = @HERCULES_SUPPORT_FALSE@ -HERCULES_SUPPORT_TRUE = @HERCULES_SUPPORT_TRUE@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ -MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ -MAKEINFO = @MAKEINFO@ -NETBOOT_DRIVERS = @NETBOOT_DRIVERS@ -NETBOOT_SUPPORT_FALSE = @NETBOOT_SUPPORT_FALSE@ -NETBOOT_SUPPORT_TRUE = @NETBOOT_SUPPORT_TRUE@ -NET_CFLAGS = @NET_CFLAGS@ -NET_EXTRAFLAGS = @NET_EXTRAFLAGS@ -OBJCOPY = @OBJCOPY@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -RANLIB = @RANLIB@ -SERIAL_SPEED_SIMULATION_FALSE = @SERIAL_SPEED_SIMULATION_FALSE@ -SERIAL_SPEED_SIMULATION_TRUE = @SERIAL_SPEED_SIMULATION_TRUE@ -SERIAL_SUPPORT_FALSE = @SERIAL_SUPPORT_FALSE@ -SERIAL_SUPPORT_TRUE = @SERIAL_SUPPORT_TRUE@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STAGE1_CFLAGS = @STAGE1_CFLAGS@ -STAGE2_CFLAGS = @STAGE2_CFLAGS@ -STRIP = @STRIP@ -VERSION = @VERSION@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_OBJCOPY = @ac_ct_OBJCOPY@ -ac_ct_RANLIB = @ac_ct_RANLIB@ -ac_ct_STRIP = @ac_ct_STRIP@ -am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ -am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -datadir = @datadir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -sbin_SCRIPTS = grub-install grub-md5-crypt grub-terminfo \ - grub-set-default - -noinst_SCRIPTS = grub-image mkbimage -EXTRA_DIST = mkbimage - -# XXX: Need to search for a header file in docs, because of multiboot.h. -AM_CFLAGS = -I$(top_srcdir)/lib -I$(top_srcdir)/docs -mbchk_SOURCES = mbchk.c -mbchk_LDADD = ../lib/libcommon.a -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .o .obj -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu util/Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --gnu util/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -grub-image: $(top_builddir)/config.status $(srcdir)/grub-image.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -grub-install: $(top_builddir)/config.status $(srcdir)/grub-install.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -grub-md5-crypt: $(top_builddir)/config.status $(srcdir)/grub-md5-crypt.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -grub-terminfo: $(top_builddir)/config.status $(srcdir)/grub-terminfo.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -grub-set-default: $(top_builddir)/config.status $(srcdir)/grub-set-default.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ - if test -f $$p \ - ; then \ - f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ - $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ - else :; fi; \ - done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ - echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ - rm -f "$(DESTDIR)$(bindir)/$$f"; \ - done - -clean-binPROGRAMS: - -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) -mbchk$(EXEEXT): $(mbchk_OBJECTS) $(mbchk_DEPENDENCIES) - @rm -f mbchk$(EXEEXT) - $(LINK) $(mbchk_LDFLAGS) $(mbchk_OBJECTS) $(mbchk_LDADD) $(LIBS) -install-sbinSCRIPTS: $(sbin_SCRIPTS) - @$(NORMAL_INSTALL) - test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)" - @list='$(sbin_SCRIPTS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - if test -f $$d$$p; then \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " $(sbinSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ - $(sbinSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(sbindir)/$$f"; \ - else :; fi; \ - done - -uninstall-sbinSCRIPTS: - @$(NORMAL_UNINSTALL) - @list='$(sbin_SCRIPTS)'; for p in $$list; do \ - f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ - echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ - rm -f "$(DESTDIR)$(sbindir)/$$f"; \ - done - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mbchk.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ -@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` -uninstall-info-am: - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) ' { files[$$0] = 1; } \ - END { for (i in files) print i; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ - list='$(DISTFILES)'; for file in $$list; do \ - case $$file in \ - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ - $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ - esac; \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test "$$dir" != "$$file" && test "$$dir" != "."; then \ - dir="/$$dir"; \ - $(mkdir_p) "$(distdir)$$dir"; \ - else \ - dir=''; \ - fi; \ - if test -d $$d/$$file; then \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(PROGRAMS) $(SCRIPTS) -installdirs: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)"; do \ - test -z "$$dir" || $(mkdir_p) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: - -install-exec-am: install-binPROGRAMS install-sbinSCRIPTS - -install-info: install-info-am - -install-man: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-info-am \ - uninstall-sbinSCRIPTS - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic ctags distclean distclean-compile \ - distclean-generic distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-binPROGRAMS \ - install-data install-data-am install-exec install-exec-am \ - install-info install-info-am install-man install-sbinSCRIPTS \ - install-strip installcheck installcheck-am installdirs \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-binPROGRAMS \ - uninstall-info-am uninstall-sbinSCRIPTS - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: