From: Geert Uytterhoeven Date: Tue, 8 Oct 2024 09:14:20 +0000 (+0200) Subject: arm64: dts: renesas: r8a774c0: Re-add voltages to OPP table X-Git-Tag: v6.15-rc1~159^2~35^2~33 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=ea34dd0f029f4a30c055ddb6daaf7a6f3bee21ed;p=thirdparty%2Fkernel%2Fstable.git arm64: dts: renesas: r8a774c0: Re-add voltages to OPP table When CONFIG_ENERGY_MODEL=y: cpu cpu0: EM: invalid perf. state: -22 When removing the (incorrect) voltages from the Operating Points Parameters tables, it was assumed they were optional, and unused, when none of the CPU nodes is tied to a regulator using the "cpu-supply" property. This assumption turned out to be incorrect, causing the reported error message. Fix this by re-adding the (correct) voltages. Note that because all voltages are identical, all operating points are considered to have the same efficiency, and the energy model always picks the one with the highest clock rate. Reported-by: Renesas Test Team via Kuninori Morimoto Fixes: 554edc3e9239bb81 ("arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/2046da75f3db95b62f86c0482063c4d04c2b47d5.1728377971.git.geert+renesas@glider.be --- diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 7655d5e3a0341..522e20924e94a 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -47,16 +47,20 @@ cluster1_opp: opp-table-1 { compatible = "operating-points-v2"; opp-shared; + opp-800000000 { opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1030000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1030000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1030000>; clock-latency-ns = <300000>; opp-suspend; };