From: Quentin Schulz Date: Wed, 12 Nov 2025 17:48:16 +0000 (+0100) Subject: doc: remove u-boot,boot-led and u-boot,error-led from "binding" X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=eb02d87c7579f83f6fe153c80d420e5f53bde4c1;p=thirdparty%2Fu-boot.git doc: remove u-boot,boot-led and u-boot,error-led from "binding" We're aiming to reduce the amount of U-Boot-specific and out-of-spec Device Tree additions. Those two properties haven't been doing anything for a long time already, except when read by board files manually. This is still the case for STM32 boards but those will be migrated in the near future according to their maintainer. In any case, let's not encourage people to add either of these properties to new or existing Device Trees and remove it from the bindings. Signed-off-by: Quentin Schulz --- diff --git a/doc/device-tree-bindings/config.txt b/doc/device-tree-bindings/config.txt index fffb69e75de..3756f57bf44 100644 --- a/doc/device-tree-bindings/config.txt +++ b/doc/device-tree-bindings/config.txt @@ -26,11 +26,6 @@ bootdelay (int) images is being packed for testing or a user holds down a button, it may allow a delay, but disable it for production. -u-boot,boot-led (string) -u-boot,error-led (string) - This is used to specify the label for an LED to indicate an error and - a successful boot, on supported hardware. - bootsecure (int) Indicates that U-Boot should use secure_boot_cmd() to run commands, rather than the normal CLI. This can be used in production images, to