From: Krzysztof Kozlowski Date: Mon, 6 Apr 2026 06:38:13 +0000 (+0200) Subject: arm64: dts: imx8mp-ab2: Correct interrupt flags X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=eb27f9b9a4b2965f8d497a3c565cfbc2473c184b;p=thirdparty%2Flinux.git arm64: dts: imx8mp-ab2: Correct interrupt flags GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 => IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 => IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted the same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW Fixes: bf68c18150ef ("arm64: dts: imx8mp-ab2: add support for NXP i.MX8MP audio board (version 2)") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Shengjiu Wang Reviewed-by: Daniel Baluta Signed-off-by: Frank Li --- diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts b/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts index dbbc0df0e3d1..443e4fd5b9bf 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-ab2.dts @@ -281,7 +281,7 @@ compatible = "nxp,pca9450c"; reg = <0x25>; interrupt-parent = <&gpio1>; - interrupts = <3 GPIO_ACTIVE_LOW>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_pmic>; regulators {