From: Sasha Neftin <sasha.neftin@intel.com>
Date: Thu, 24 Jun 2021 08:18:46 +0000 (+0300)
Subject: e1000e: Add polling mechanism to indicate CSME DPG exit
X-Git-Tag: v5.15-rc1~157^2~438^2~10
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=ef407b86d3cc7ab7ad37658c1c7a094cb8f3b6b4;p=thirdparty%2Fkernel%2Flinux.git

e1000e: Add polling mechanism to indicate CSME DPG exit

Per guidance from the CSME architecture team, it may take
up to 1 second for unconfiguring dynamic power gating mode.
Practically it can take more time. Wait up to 2.5 seconds to indicate
dynamic power gating exit from the S0ix configuration. Detect
scenarios that take more than 1 second but less than 2.5 seconds
will emit warning message.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h
index e59456d867dbd..9b145f6248a8f 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.h
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h
@@ -41,6 +41,7 @@
 #define E1000_FWSM_WLOCK_MAC_MASK	0x0380
 #define E1000_FWSM_WLOCK_MAC_SHIFT	7
 #define E1000_FWSM_ULP_CFG_DONE		0x00000400	/* Low power cfg done */
+#define E1000_EXFWSM_DPG_EXIT_DONE	0x00000001
 
 /* Shared Receive Address Registers */
 #define E1000_SHRAL_PCH_LPT(_i)		(0x05408 + ((_i) * 8))
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 4fa6f9f7d1998..27107a927455a 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6481,8 +6481,10 @@ static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter)
 static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	bool firmware_bug = false;
 	u32 mac_data;
 	u16 phy_data;
+	u32 i = 0;
 
 	if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID) {
 		/* Request ME unconfigure the device from S0ix */
@@ -6490,6 +6492,28 @@ static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter)
 		mac_data &= ~E1000_H2ME_START_DPG;
 		mac_data |= E1000_H2ME_EXIT_DPG;
 		ew32(H2ME, mac_data);
+
+		/* Poll up to 2.5 seconds for ME to unconfigure DPG.
+		 * If this takes more than 1 second, show a warning indicating a
+		 * firmware bug
+		 */
+		while (!(er32(EXFWSM) & E1000_EXFWSM_DPG_EXIT_DONE)) {
+			if (i > 100 && !firmware_bug)
+				firmware_bug = true;
+
+			if (i++ == 250) {
+				e_dbg("Timeout (firmware bug): %d msec\n",
+				      i * 10);
+				break;
+			}
+
+			usleep_range(10000, 11000);
+		}
+		if (firmware_bug)
+			e_warn("DPG_EXIT_DONE took %d msec. This is a firmware bug\n",
+			       i * 10);
+		else
+			e_dbg("DPG_EXIT_DONE cleared after %d msec\n", i * 10);
 	} else {
 		/* Request driver unconfigure the device from S0ix */
 
diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h
index 8165ba2619a4d..6c0cd8cab3ef2 100644
--- a/drivers/net/ethernet/intel/e1000e/regs.h
+++ b/drivers/net/ethernet/intel/e1000e/regs.h
@@ -213,6 +213,7 @@
 #define E1000_FACTPS	0x05B30	/* Function Active and Power State to MNG */
 #define E1000_SWSM	0x05B50	/* SW Semaphore */
 #define E1000_FWSM	0x05B54	/* FW Semaphore */
+#define E1000_EXFWSM	0x05B58	/* Extended FW Semaphore */
 /* Driver-only SW semaphore (not used by BOOT agents) */
 #define E1000_SWSM2	0x05B58
 #define E1000_FFLT_DBG	0x05F04	/* Debug Register */