From: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Date: Mon, 14 Jul 2025 13:22:20 +0000 (+0200)
Subject: km: pg-wcom-ls102xa: call qrio deblock cfg earlier
X-Git-Tag: v2025.10-rc1~30
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f1b5cb6f50ebebade6f0551ba1ef508f6330105a;p=thirdparty%2Fu-boot.git

km: pg-wcom-ls102xa: call qrio deblock cfg earlier

Move the call to configure the qrio i2c deblock pins earlier.
Before this, the call was happening after the first attempt to deblock
the SDP EEPROM, which resulted in a not correct sequence.

Signed-off-by: Tomas Alvarez Vanoli <tomas.alvarez-vanoli@hitachienergy.com>
Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
---

diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
index 409a55ebda6..7db75f4df3e 100644
--- a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
+++ b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c
@@ -38,7 +38,7 @@ static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
 int checkboard(void)
 {
 	show_qrio();
-
+	i2c_deblock_gpio_cfg();
 	return 0;
 }
 
@@ -96,8 +96,6 @@ int board_early_init_f(void)
 	qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
 	qrio_prst(KM_DBG_ETH_RST, !qrio_get_pgy_pres_pin(), false);
 
-	i2c_deblock_gpio_cfg();
-
 	/* enable the Unit LED (red) & Boot LED (on) */
 	qrio_set_leds();