From: Mike Brady <4265913+mikebrady@users.noreply.github.com>
Date: Mon, 12 Jul 2021 14:04:58 +0000 (+0100)
Subject: Update CAR INSTALL.md
X-Git-Tag: 3.3.9~19
X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=fc5772936279c835a7fc891e4328c2d6a6fead5d;p=thirdparty%2Fshairport-sync.git

Update CAR INSTALL.md
---

diff --git a/CAR INSTALL.md b/CAR INSTALL.md
index d5680671..a9617b66 100644
--- a/CAR INSTALL.md	
+++ b/CAR INSTALL.md	
@@ -193,7 +193,7 @@ denyinterfaces wlan0
 ```
 From this point on, at least on the Raspberry Pi, if you reboot the machine, it will not reconnect to your network – instead, it will act as the WiFi base station you have configured with `hostapd` and `isc-dhcp-server`.
 
-### Optimise startup time -- Raspberry Pi
+### Optimise startup time -- Raspberry Pi Specific
 
 This is applicable to a Raspberry Pi only. Some of it may be applicable to other systems, but it has not been tested on them. There are quite a few services that are not necessary for this setup. Disabling them can increase startup time. Running these commands disables them:
 
@@ -207,7 +207,7 @@ sudo systemctl disable dphys-swapfile.service
 sudo systemctl disable networking.service
 ````
 
-### Read-only mode -- Raspberry Pi
+### Read-only mode -- Raspberry Pi Specific
 
 Run `sudo raspi-config` and then choose `Performance Options` > `Overlay Filesystem` and choose to enable the overlay filesystem, and to set the boot partition to be write-protected.