From: Lech Perczak Date: Mon, 3 Feb 2025 23:24:21 +0000 (+0100) Subject: ath79: ZTE MF281: use specific board definition file for qca9888 X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=refs%2Fpull%2F17620%2Fhead;p=thirdparty%2Fopenwrt.git ath79: ZTE MF281: use specific board definition file for qca9888 Using board definition file extracted from stock firmware yields 50% throughput improvement in RX direction under iperf3 test. Make the device use temporary files from firmware_qca-wireless.git temporarily, as well as select the specific variant in the device tree files. The device uses same board file as the MF286C. Signed-off-by: Lech Perczak Link: https://github.com/openwrt/openwrt/pull/17620 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/ath79/dts/qca9563_zte_mf281.dts b/target/linux/ath79/dts/qca9563_zte_mf281.dts index d0693658a4d..06a8b2350ab 100644 --- a/target/linux/ath79/dts/qca9563_zte_mf281.dts +++ b/target/linux/ath79/dts/qca9563_zte_mf281.dts @@ -158,6 +158,8 @@ &wifi_ath10k { nvmem-cells = <&macaddr_mac_0 1>, <&cal_caldata_5000>; nvmem-cell-names = "mac-address", "pre-calibration"; + /* Board file from stock firmware is shared with MF286C */ + qcom,ath10k-calibration-variant = "ZTE-MF286C"; }; &pinmux { diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index f473fa780f5..0408d6ad823 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -458,6 +458,7 @@ define Device/zte_mf281 IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ check-size DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \ + -ath10k-board-qca9888 ipq-wifi-zte_mf286c \ kmod-usb-acm comgt-ncm endef TARGET_DEVICES += zte_mf281