From: Paweł Owoc Date: Mon, 12 May 2025 13:41:09 +0000 (+0200) Subject: qualcommax: dts: fix missing or empty reg property warning X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=refs%2Fpull%2F18787%2Fhead;p=thirdparty%2Fopenwrt.git qualcommax: dts: fix missing or empty reg property warning Remove property 'status = "disabled"' for partitions in Zyxel NBG7815. This option is mainly used for NAND memory and here we have SPI memory. Signed-off-by: Paweł Owoc Link: https://github.com/openwrt/openwrt/pull/18787 Signed-off-by: Robert Marko --- diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts index d0a2fb7b4ee..aeda7ff213f 100644 --- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts +++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts @@ -89,20 +89,6 @@ cs-gpios = <0>; status = "okay"; - /* - * Bootloader will find the NAND DT node by the compatible and - * then "fixup" it by adding the partitions from the SMEM table - * using the legacy bindings thus making it impossible for us - * to change the partition table or utilize NVMEM for calibration. - * So add a dummy partitions node that bootloader will populate - * and set it as disabled so the kernel ignores it instead of - * printing warnings due to the broken way bootloader adds the - * partitions. - */ - partitions { - status = "disabled"; - }; - flash@0 { #address-cells = <1>; #size-cells = <1>;