From: Hauke Mehrtens Date: Tue, 15 Jul 2025 19:59:25 +0000 (+0200) Subject: mvebu: Use common files folder X-Git-Url: http://git.ipfire.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=refs%2Fpull%2F19423%2Fhead;p=thirdparty%2Fopenwrt.git mvebu: Use common files folder The files-6.6 and files-6.12 folder contain the same content, merge them into the files folder for both kernel versions. Link: https://github.com/openwrt/openwrt/pull/19423 Signed-off-by: Hauke Mehrtens --- diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts deleted file mode 100644 index 8740cb32d92..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts +++ /dev/null @@ -1,376 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Buffalo LinkStation LS220DE - * - * Copyright (C) 2023 Daniel González Cabanelas - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include -#include -#include -#include - -/ { - model = "Buffalo LinkStation LS220DE"; - compatible = "buffalo,ls220de", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_failsafe; - led-running = &led_power; - led-upgrade = &led_upgrade; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - - soc { - ranges = ; - }; - - system_fan: gpio_fan { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - #cooling-cells = <2>; - }; - - thermal-zones { - hdd-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ - - trips { - hdd_alert1: trip1 { - temperature = <34000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert2: trip2 { - temperature = <40000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert3: trip3 { - temperature = <45000>; - hysteresis = <2000>; - type = "passive"; - }; - hdd_hot { - temperature = <50000>; - hysteresis = <2000>; - type = "hot"; - }; - hdd_crit { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&hdd_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; - }; - map2 { - trip = <&hdd_alert2>; - cooling-device = <&system_fan 2 2>; - }; - map3 { - trip = <&hdd_alert3>; - cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Switch"; - linux,code = ; - linux,input-type = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - function { - label = "Function Button"; - linux,code = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - - indicator_red { - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_power: power_white { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_failsafe: power_red { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - led_upgrade: power_orange { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - }; - - led_boot: indicator_white { - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - hdd1_red { - function = LED_FUNCTION_DISK; - color = ; - gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - function-enumerator = <1>; - }; - - hdd2_red { - function = LED_FUNCTION_DISK; - color = ; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - function-enumerator = <2>; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - - sata1_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "HDD1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <2000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - sata2_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD2"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <4000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - marvell,reg-init = <0x3 0x10 0xf000 0x091A>, /* LED function */ - <0x3 0x11 0x0000 0x4401>, /* LED polarity */ - <0x3 0x12 0x0000 0x4905>; /* LED timer */ - #thermal-sensor-cells = <0>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi_kernel"; - reg = <0x00000000 0x02000000>; /* 32 MiB */ - }; - - partition@2000000 { - label = "ubi"; - reg = <0x02000000 0x1df00000>; /* 479 MiB */ - }; - }; - }; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000 0xf0000>; /* 960 KiB*/ - label = "u-boot"; - read-only; - }; - partition@f0000 { - reg = <0xf0000 0x10000>; /* 64 KiB */ - label = "u-boot-env"; - }; - }; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&pinctrl { - pmx_power_hdd2: pmx-power-hdd2 { - marvell,pins = "mpp2"; - marvell,function = "gpio"; - }; - - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_hdd_present: pmx-hdd-present { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp15", "mpp16"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds { - marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds { - marvell,pins = "mpp55", "mpp57", "mpp62"; - marvell,function = "gpio"; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts deleted file mode 100644 index 13cc8efa2dd..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Buffalo LinkStation LS421DE - * - * Copyright (C) 2020 Daniel González Cabanelas - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include "mvebu-linkstation-fan.dtsi" -#include -#include -#include - -/ { - model = "Buffalo LinkStation LS421DE"; - compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_failsafe; - led-running = &led_power; - led-upgrade = &led_upgrade; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ - }; - - soc { - ranges = ; - }; - - system_fan: gpio_fan { - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; - alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - - #cooling-cells = <2>; - }; - - thermal-zones { - hdd-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */ - - trips { - hdd_alert1: trip1 { - temperature = <36000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert2: trip2 { - temperature = <44000>; - hysteresis = <2000>; - type = "active"; - }; - hdd_alert3: trip3 { - temperature = <52000>; - hysteresis = <2000>; - type = "passive"; - }; - hdd_crit: trip4 { - temperature = <60000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <&hdd_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT 1>; - }; - map2 { - trip = <&hdd_alert2>; - cooling-device = <&system_fan 2 2>; - }; - map3 { - trip = <&hdd_alert3>; - cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>; - }; - }; - }; - - ethphy-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <ðphy0>; - - trips { - ethphy_alert1: trip1 { - temperature = <65000>; - hysteresis = <4000>; - type = "passive"; - }; - - ethphy_crit: trip2 { - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map1 { - trip = <ðphy_alert1>; - cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - }; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Switch"; - linux,code = ; - linux,input-type = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - function { - label = "Function Button"; - linux,code = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - - system_red { - label = "ls421de:red:system"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - led_power: power_white { - label = "ls421de:white:power"; - gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_failsafe: power_red { - label = "ls421de:red:power"; - gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - led_upgrade: power_orange { - label = "ls421de:orange:power"; - gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; - }; - - led_boot: system_white { - label = "ls421de:white:system"; - gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; - }; - - hdd1_red { - label = "ls421de:red:hdd1"; - gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata1"; - }; - - hdd2_red { - label = "ls421de:red:hdd2"; - gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ata2"; - }; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - - usb_power: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "USB"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; - }; - - sata1_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "HDD1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <2000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - }; - - sata2_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "HDD2"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - startup-delay-us = <4000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - - rs5c372a: rs5c372a@32 { - compatible = "ricoh,rs5c372a"; - reg = <0x32>; - wakeup-source; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ - reg = <0>; - marvell,reg-init = <0x2 0x10 0xffff 0x0006>, /* disable CLK125 */ - <0x3 0x10 0x0000 0x1991>, /* LED function */ - <0x3 0x11 0x0000 0x4401>, /* LED polarity */ - <0x3 0x12 0x0000 0x4905>; /* LED timer */ - #thermal-sensor-cells = <0>; - }; -}; - -&pciec { - status = "okay"; - pinctrl-0 = <&pmx_pcie>; - pinctrl-names = "default"; - - /* Connected to uPD720202 USB 3.0 Host */ - pcie@1,0 { - status = "okay"; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&sdio { - pinctrl-0 = <&sdio_pins2>; - pinctrl-names = "default"; - status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x00000000 0x02000000>; /* 32 MiB */ - }; - - partition@2000000 { - label = "ubi"; - reg = <0x02000000 0x1e000000>; /* 480 MiB */ - }; - }; - }; -}; - -&spi0 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000 0xf0000>; /* 960 KiB*/ - label = "u-boot"; - read-only; - }; - partition@f0000 { - reg = <0xf0000 0x10000>; /* 64 KiB */ - label = "u-boot-env"; - }; - }; - }; -}; - -&pinctrl { - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_power_usb: pmx-power-usb { - marvell,pins = "mpp5"; - marvell,function = "gpo"; - }; - - pmx_power_hdd1: pmx-power-hdd1 { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - - pmx_power_hdd2: pmx-power-hdd2 { - marvell,pins = "mpp9"; - marvell,function = "gpo"; - }; - - pmx_fan_lock: pmx-fan-lock { - marvell,pins = "mpp10"; - marvell,function = "gpio"; - }; - - pmx_hdd_present: pmx-hdd-present { - marvell,pins = "mpp11", "mpp12"; - marvell,function = "gpio"; - }; - - pmx_fan_high: pmx-fan-high { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_fan_low: pmx-fan-low { - marvell,pins = "mpp14"; - marvell,function = "gpio"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp15", "mpp16"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds { - marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds { - marvell,pins = "mpp55", "mpp57", "mpp62"; - marvell,function = "gpio"; - }; - - pmx_pcie: pmx-pcie { - marvell,pins = "mpp56", "mpp60"; - marvell,function = "pcie"; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts deleted file mode 100644 index 0d5ec567eab..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Device Tree file for Ctera C200-V2 - * - * Copyright (C) 2021 Pawel Dembicki - */ - -/dts-v1/; - -#include "armada-370.dtsi" -#include -#include -#include -#include - -/ { - model = "Ctera C200 V2"; - compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_red; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1024 MB */ - }; - - soc { - ranges = ; - }; - - thermal-zones { - ethphy-thermal { - polling-delay = <20000>; - polling-delay-passive = <2000>; - - thermal-sensors = <ðphy0>; - - trips { - ethphy_alert1: trip1 { - temperature = <65000>; - hysteresis = <4000>; - type = "passive"; - }; - - ethphy_crit: trip2 { - temperature = <100000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_buttons>; - pinctrl-names = "default"; - - power { - label = "Power Button"; - linux,code = ; - gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; - }; - - reset { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; - }; - - usb1 { - label = "USB1 Button"; - linux,code = ; - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - }; - - usb2 { - label = "USB2 Button"; - linux,code = ; - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - pinctrl-0 = <&pmx_poweroff>; - pinctrl-names = "default"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_leds1 &pmx_leds2>; - pinctrl-names = "default"; - - led-0 { - function = LED_FUNCTION_USB; - function-enumerator = <2>; - color = ; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - }; - - led-1 { - function = LED_FUNCTION_USB; - function-enumerator = <2>; - color = ; - gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb1_port 1>, <&usb2_port 1>; - }; - - led-2 { - function = LED_FUNCTION_USB; - function-enumerator = <1>; - color = ; - gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; - }; - - led-3 { - function = LED_FUNCTION_USB; - function-enumerator = <1>; - color = ; - gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb1_port 2>, <&usb2_port 2>; - }; - - led-4 { - function = LED_FUNCTION_DISK; - function-enumerator = <2>; - color = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata2"; - }; - - led-5 { - function = LED_FUNCTION_DISK; - function-enumerator = <1>; - color = ; - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - }; - - led-6 { - function = LED_FUNCTION_DISK; - function-enumerator = <2>; - color = ; - gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; - }; - - led-7 { - function = LED_FUNCTION_INDICATOR; - color = ; - gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; - }; - - led-8 { - function = LED_FUNCTION_DISK_ERR; - color = ; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - }; - - led-9 { - function = LED_FUNCTION_DISK_ERR; - color = ; - gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - }; - - led_status_red: led-10 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; - }; - - led-11 { - function = LED_FUNCTION_DISK; - function-enumerator = <1>; - color = ; - gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata1"; - }; - - led_status_green: led-12 { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&coherencyfab { - broken-idle; -}; - -ð1 { - pinctrl-0 = <&ge1_rgmii_pins>; - pinctrl-names = "default"; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; -}; - -&i2c0 { - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - clock-frequency = <100000>; - status = "okay"; - - hwmon@2a { - compatible = "nuvoton,nct7802"; - reg = <0x2a>; - }; - - rtc@30 { - compatible = "sii,s35390a"; - reg = <0x30>; - }; -}; - -&mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - #thermal-sensor-cells = <0>; - }; -}; - -&nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x0000000 0x200000>; - read-only; - }; - - partition@200000 { - label = "certificate"; - reg = <0x0200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "preset_cfg"; - reg = <0x0300000 0x100000>; - read-only; - }; - - partition@400000 { - label = "dev_params"; - reg = <0x0400000 0x100000>; - read-only; - }; - partition@500000 { - label = "active_bank"; - reg = <0x0500000 0x0100000>; - }; - - partition@600000 { - label = "magic"; - reg = <0x0600000 0x0100000>; - read-only; - }; - - partition@700000 { - label = "bank1"; - reg = <0x0700000 0x2800000>; - }; - - partition@2f00000 { - label = "bank2"; - reg = <0x2f00000 0x2800000>; - }; - - /* 0x5700000-0x5a00000 undefined in vendor firmware */ - - partition@5a00000 { - label = "reserved"; - reg = <0x5a00000 0x2000000>; - }; - - partition@7a00000 { - label = "ubi"; - reg = <0x7a00000 0x8600000>; - }; - }; - }; -}; - -&pciec { - status = "okay"; - - pcie@1,0 { - pinctrl-0 = <&pmx_pcie>; - pinctrl-names = "default"; - status = "okay"; - reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; - - /* -[0000:00]---01.0-[01]----00.0 */ - /* usbport trigger won't work */ - bridge@0,1 { - compatible = "pci11ab,6710"; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - usb@1,0 { - /* Renesas uPD720202 */ - compatible = "pci1912,0015"; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - - usb1_port: port@1 { - reg = <1>; - #trigger-source-cells = <1>; - }; - - usb2_port: port@2 { - reg = <2>; - #trigger-source-cells = <1>; - }; - }; - }; - }; -}; - -&pinctrl { - pmx_poweroff: pmx-poweroff { - marvell,pins = "mpp7"; - marvell,function = "gpo"; - }; - - pmx_power_cpu: pmx-power-cpu { - marvell,pins = "mpp4"; - marvell,function = "vdd"; - }; - - pmx_buttons: pmx-buttons { - marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32"; - marvell,function = "gpio"; - }; - - pmx_leds1: pmx-leds1 { - marvell,pins = "mpp47"; - marvell,function = "gpo"; - }; - - pmx_leds2: pmx-leds2 { - marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51", - "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58"; - marvell,function = "gpio"; - }; - - pmx_pcie: pmx-pcie { - marvell,pins = "mpp59"; - marvell,function = "gpio"; - }; - - /* this gpio is connected to the pin of buzzer - * leave it as is due lack of proper driver - */ - pmx_buzzer: pmx-buzzer { - marvell,pins = "mpp63"; - marvell,function = "gpio"; - }; -}; - -&pmsu { - pinctrl-0 = <&pmx_power_cpu>; - pinctrl-names = "default"; -}; - -&rtc { - status = "disabled"; -}; - -&sata { - nr-ports = <2>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - hdd0_temp: sata-port@0 { - reg = <0>; - #thermal-sensor-cells = <0>; - }; - - hdd1_temp: sata-port@1 { - reg = <1>; - #thermal-sensor-cells = <0>; - }; -}; - -&uart0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts deleted file mode 100644 index 86029d3629a..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts +++ /dev/null @@ -1,389 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include -#include -#include -#include "armada-380.dtsi" - -/ { - model = "IIJ SA-W2"; - compatible = "iij,sa-w2", "marvell,armada380"; - - aliases { - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_green; - label-mac-device = &ge0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256MB */ - }; - - soc { - ranges = ; - - pcie { - status = "okay"; - - pcie@1,0 { - status = "okay"; - }; - - pcie@3,0 { - status = "okay"; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_keys_pins>; - - button-init { - label = "init"; - linux,code = ; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_leds_pins>; - - led-0 { - gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN_5GHZ; - linux,default-trigger = "phy0tpt"; - }; - - led-1 { - gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN_5GHZ; - }; - - led-2 { - gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-4 { - gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_MOBILE; - }; - - led-5 { - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_MOBILE; - }; - - led-6 { - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN_2GHZ; - linux,default-trigger = "phy1tpt"; - }; - - led-7 { - gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN_2GHZ; - }; - - led_power_green: led-8 { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led_power_red: led-9 { - gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led-10 { - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_USB; - function-enumerator = <1>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port2>; - }; - - led-11 { - gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_USB; - function-enumerator = <0>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port1>; - }; - }; - - regulator-vbus-usb0 { - compatible = "regulator-fixed"; - regulator-name = "vbus-usb0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - regulator-vbus-usb1 { - compatible = "regulator-fixed"; - regulator-name = "vbus-usb1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&pinctrl { - pmx_usb_pins: usb-pins { - marvell,pins = "mpp2", /* smsc usb2514b reset */ - "mpp48", "mpp49", /* port over current */ - "mpp52", "mpp53"; /* port vbus */ - marvell,function = "gpio"; - }; - - pmx_keys_pins: keys-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - pmx_leds_pins: leds-pins { - marvell,pins = "mpp19", "mpp20", "mpp33", "mpp34", "mpp35", - "mpp36", "mpp44", "mpp45", "mpp46", "mpp47", - "mpp54", "mpp55"; - marvell,function = "gpio"; - }; -}; - -&gpio0 { - usb-hub-reset { - gpio-hog; - gpios = <2 GPIO_ACTIVE_HIGH>; - output-high; - }; -}; - -&usb0 { - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_pins>; - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - /* SMSC USB2514B on PCB */ - hub@1 { - compatible = "usb424,2514"; - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - hub_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð1 { - pinctrl-names = "default"; - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - - nvmem-cells = <&macaddr_bdinfo_6 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - status = "okay"; - - /* Marvell 88E6172 */ - switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0x0>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio1>; - interrupts = <10 IRQ_TYPE_LEVEL_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "ge1_0"; - }; - - port@1 { - reg = <1>; - label = "ge1_1"; - }; - - port@2 { - reg = <2>; - label = "ge1_2"; - }; - - port@3 { - reg = <3>; - label = "ge1_3"; - }; - - ge0: port@4 { - reg = <4>; - label = "ge0"; - nvmem-cells = <&macaddr_bdinfo_6 0>; - nvmem-cell-names = "mac-address"; - }; - - /* - * eth0 is connected to port5 for WAN connection - * on port4 ("GE0") - */ - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <ð1>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; - -&rtc { - status = "disabled"; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x100000>; - label = "bootloader"; - read-only; - }; - - partition@100000 { - reg = <0x100000 0x10000>; - label = "bootloader-env"; - read-only; - }; - - partition@110000 { - reg = <0x110000 0xf0000>; - label = "board_info"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_bdinfo_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@200000 { - compatible = "iij,seil-firmware"; - reg = <0x200000 0xf00000>; - label = "firmware"; - iij,bootdev-name = "flash"; - iij,seil-id = <0x5345494c 0x32303135>; - }; - - partition@1100000 { - compatible = "iij,seil-firmware"; - reg = <0x1100000 0xf00000>; - label = "rescue"; - iij,bootdev-name = "rescue"; - iij,seil-id = <0x5345494c 0x32303135>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts deleted file mode 100644 index e9e6c29213f..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-3xe.dtsi" - -/ { - model = "Fortinet FortiGate 30E"; - compatible = "fortinet,fg-30e", "marvell,armada385", "marvell,armada380"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi deleted file mode 100644 index 6d835332d28..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-xxe.dtsi" - -/ { - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x40000000>; /* 1GB */ - }; -}; - -&gpio_leds { - led-14 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SPEED_WAN; - linux,default-trigger = "mv88e6xxx-0:00:100Mbps"; - }; - - led-15 { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SPEED_WAN; - linux,default-trigger = "mv88e6xxx-0:00:1Gbps"; - }; -}; - -&pinctrl { - pmx_switch_pins: switch-pins { - marvell,pins = "mpp19"; - marvell,function = "gpio"; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>, <&pmx_switch_pins>; - - /* Marvell 88E6176 */ - switch@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2>; - reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "wan"; - nvmem-cells = <&macaddr_bdinfo_d880 1>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - nvmem-cells = <&macaddr_bdinfo_d880 5>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - nvmem-cells = <&macaddr_bdinfo_d880 4>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - nvmem-cells = <&macaddr_bdinfo_d880 3>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - nvmem-cells = <&macaddr_bdinfo_d880 2>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - ethernet = <ð0>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts deleted file mode 100644 index 01a9e368268..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-5xe.dtsi" - -/ { - model = "Fortinet FortiGate 50E"; - compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts deleted file mode 100644 index 7bb61113c57..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-5xe.dtsi" - -/ { - model = "Fortinet FortiGate 51E"; - compatible = "fortinet,fg-51e", "marvell,armada385", "marvell,armada380"; -}; - -&ahci0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts deleted file mode 100644 index bcb0d05627c..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-5xe.dtsi" - -/ { - model = "Fortinet FortiGate 52E"; - compatible = "fortinet,fg-52e", "marvell,armada385", "marvell,armada380"; -}; - -&ahci0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi deleted file mode 100644 index bf1daa3bc60..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi +++ /dev/null @@ -1,172 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-xxe.dtsi" - -/ { - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2GB */ - }; -}; - -&gpio_leds { - led-14 { - gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SPEED_WAN; - function-enumerator = <1>; - linux,default-trigger = "f1072004.mdio-mii:00:1Gbps"; - }; - - led-15 { - gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SPEED_WAN; - function-enumerator = <2>; - linux,default-trigger = "f1072004.mdio-mii:01:1Gbps"; - }; - - led-16 { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <5>; - linux,default-trigger = "mv88e6xxx-0:00:100Mbps"; - }; - - led-17 { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <5>; - linux,default-trigger = "mv88e6xxx-0:00:1Gbps"; - }; -}; - -&pinctrl { - pmx_phy_switch_pins: phy-switch-pins { - marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41"; - marvell,function = "gpio"; - }; -}; - -ð1 { - status = "okay"; - - phy-handle = <ðphy0>; - phy-connection-type = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - nvmem-cells = <&macaddr_bdinfo_d880 1>; - nvmem-cell-names = "mac-address"; -}; - -ð2 { - status = "okay"; - - phy-handle = <ðphy1>; - phy-connection-type = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <3>; - nvmem-cells = <&macaddr_bdinfo_d880 2>; - nvmem-cell-names = "mac-address"; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>; - - /* Marvell 88E1512 */ - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - interrupt-parent = <&gpio0>; - interrupts = <20 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - /* - * LINK/ACT (Green): LED[0], Active Low - * SPEED 100M (Amber): LED[1], Active High - */ - marvell,reg-init = <3 16 0 0x71>, - <3 17 0 0x4>; - }; - - /* Marvell 88E1512 */ - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0x1>; - interrupt-parent = <&gpio1>; - interrupts = <9 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - /* - * LINK/ACT (Green): LED[0], Active Low - * SPEED 100M (Amber): LED[1], Active High - */ - marvell,reg-init = <3 16 0 0x71>, - <3 17 0 0x4>; - }; - - /* Marvell 88E6176 */ - switch@2 { - compatible = "marvell,mv88e6085"; - reg = <0x2>; - reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan5"; - nvmem-cells = <&macaddr_bdinfo_d880 7>; - nvmem-cell-names = "mac-address"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - nvmem-cells = <&macaddr_bdinfo_d880 6>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - nvmem-cells = <&macaddr_bdinfo_d880 5>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - nvmem-cells = <&macaddr_bdinfo_d880 4>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - nvmem-cells = <&macaddr_bdinfo_d880 3>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - ethernet = <ð0>; - phy-connection-type = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi deleted file mode 100644 index a1adddc4e04..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi +++ /dev/null @@ -1,346 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include -#include -#include -#include "armada-385.dtsi" - -/ { - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_green; - led-upgrade = &led_status_green; - label-mac-device = ð0; - }; - - chosen { - stdout-path = "serial0:9600n8"; - }; - - soc { - ranges = ; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_gpio_keys_pins>; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - }; - }; - - gpio_leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pmx_gpio_leds_pins>; - - led-0 { - gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_ALARM; - }; - - led-1 { - gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; - color = ; - function = "ha"; - }; - - led_status_green: led-2 { - gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-3 { - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - color = ; - function = "ha"; - }; - - led-4 { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_ALARM; - }; - - led_status_red: led-5 { - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_STATUS; - }; - - led-6 { - gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <4>; - linux,default-trigger = "mv88e6xxx-0:01:1Gbps"; - }; - - led-7 { - gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <4>; - linux,default-trigger = "mv88e6xxx-0:01:100Mbps"; - }; - - led-8 { - gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <3>; - linux,default-trigger = "mv88e6xxx-0:02:100Mbps"; - }; - - led-9 { - gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <3>; - linux,default-trigger = "mv88e6xxx-0:02:1Gbps"; - }; - - led-10 { - gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <1>; - linux,default-trigger = "mv88e6xxx-0:04:1Gbps"; - }; - - led-11 { - gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <1>; - linux,default-trigger = "mv88e6xxx-0:04:100Mbps"; - }; - - led-12 { - gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <2>; - linux,default-trigger = "mv88e6xxx-0:03:1Gbps"; - }; - - led-13 { - gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_SPEED_LAN; - function-enumerator = <2>; - linux,default-trigger = "mv88e6xxx-0:03:100Mbps"; - }; - }; - - reg_usb_vbus: regulator-usb-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - regulator-always-on; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - gpio2: gpio@24 { - compatible = "nxp,pca9555"; - reg = <0x24>; - gpio-controller; - #gpio-cells = <0x2>; - }; - - hwmon@28 { - compatible = "nuvoton,nct7802"; - reg = <0x28>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&pinctrl { - pmx_gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35", - "mpp45", "mpp47"; - marvell,function = "gpio"; - }; - - pmx_usb_pins: usb-pins { - marvell,pins = "mpp53"; - marvell,function = "gpio"; - }; - - pmx_gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp54"; - marvell,function = "gpio"; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - nvmem-cells = <&macaddr_bdinfo_d880 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&usb3_0 { - pinctrl-names = "default"; - pinctrl-0 = <&pmx_usb_pins>; - status = "okay"; - - vbus-supply = <®_usb_vbus>; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x0 0x1c0000>; - label = "u-boot"; - read-only; - }; - - partition@1c0000 { - reg = <0x1c0000 0x10000>; - label = "firmware-info"; - - /* - * 0x10 - 0x2f : image name (image1) - * 0x30 - 0x4f : image name (image2) - * 0x170 (1byte): active image (0x0/0x1) - * 0x184 - 0x185: kernel block count (image1) - * 0x18c - 0x18d: rootfs block count (image1) - * 0x194 - 0x195: kernel block count (image2) - * 0x19c - 0x19d: rootfs block count (image2) - * 0x1be (1byte): bit7 -> active flag (image1)? - * 0x1ce (1byte): bit7 -> active flag (image2)? - * - * Note: block size --> 0x200 (512 bytes) - */ - }; - - partition@1d0000 { - reg = <0x1d0000 0x10000>; - label = "dtb"; - read-only; - }; - - partition@1e0000 { - reg = <0x1e0000 0x10000>; - label = "u-boot-env"; - read-only; - }; - - partition@1f0000 { - reg = <0x1f0000 0x10000>; - label = "board-info"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_bdinfo_d880: macaddr@d880 { - compatible = "mac-base"; - reg = <0xd880 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@200000 { - reg = <0x200000 0x600000>; - label = "kernel"; - }; - - partition@800000 { - reg = <0x800000 0x1800000>; - label = "rootfs"; - }; - - partition@2000000 { - reg = <0x2000000 0x600000>; - label = "kn2"; - read-only; - }; - - partition@2600000 { - reg = <0x2600000 0x1800000>; - label = "rfs2"; - read-only; - }; - - partition@3e00000 { - reg = <0x3e00000 0x1200000>; - label = "part1"; - read-only; - }; - - partition@5000000 { - reg = <0x5000000 0x1200000>; - label = "part2"; - read-only; - }; - - partition@6200000 { - reg = <0x6200000 0x1e00000>; - label = "config"; - read-only; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts deleted file mode 100644 index eee9e6d942d..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-5xe.dtsi" - -/ { - model = "Fortinet FortiWiFi 50E-2R"; - compatible = "fortinet,fwf-50e-2r", "marvell,armada385", "marvell,armada380"; -}; - -&pciec { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts deleted file mode 100644 index d9ebd9f8158..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts +++ /dev/null @@ -1,20 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "armada-385-fortinet-fg-5xe.dtsi" - -/ { - model = "Fortinet FortiWiFi 51E"; - compatible = "fortinet,fwf-51e", "marvell,armada385", "marvell,armada380"; -}; - -&ahci0 { - status = "okay"; -}; - -&pciec { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts deleted file mode 100644 index 63d25701c95..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts +++ /dev/null @@ -1,213 +0,0 @@ -/* - * Device Tree file for the Linksys WRT32X (Venom) - * - * Copyright (C) 2017 Imre Kaloz - * - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include -#include -#include "armada-385-linksys.dtsi" - -/ { - model = "Linksys WRT32X"; - compatible = "linksys,wrt32x", "linksys,venom", "linksys,armada385", - "marvell,armada385", "marvell,armada380"; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = "serial0:115200n8"; - append-rootblock = "root=/dev/mtdblock"; - }; -}; - -&expander0 { - wan_amber@0 { - label = "venom:amber:wan"; - reg = <0x0>; - }; - - wan_blue@1 { - label = "venom:blue:wan"; - reg = <0x1>; - }; - - usb2@5 { - label = "venom:blue:usb2"; - reg = <0x5>; - }; - - usb3_1@6 { - label = "venom:blue:usb3_1"; - reg = <0x6>; - }; - - usb3_2@7 { - label = "venom:blue:usb3_2"; - reg = <0x7>; - }; - - wps_blue@8 { - label = "venom:blue:wps"; - reg = <0x8>; - }; - - wps_amber@9 { - label = "venom:amber:wps"; - reg = <0x9>; - }; -}; - -&gpio_leds { - power { - gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; - label = "venom:blue:power"; - }; - - sata { - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - label = "venom:blue:sata"; - }; - - wlan_2g { - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_2g"; - }; - - wlan_5g { - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - label = "venom:blue:wlan_5g"; - }; -}; - -&gpio_leds_pins { - marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; -}; - -&nand { - /* Spansion S34ML02G2 256MiB, OEM Layout */ - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x200000>; /* 2MB */ - read-only; - }; - - partition@200000 { - label = "u_env"; - reg = <0x200000 0x20000>; /* 128KB */ - }; - - partition@220000 { - label = "s_env"; - reg = <0x220000 0x40000>; /* 256KB */ - }; - - partition@180000 { - label = "unused_area"; - reg = <0x260000 0x5c0000>; /* 5.75MB */ - }; - - partition@7e0000 { - label = "devinfo"; - reg = <0x7e0000 0x40000>; /* 256KB */ - read-only; - }; - - /* kernel1 overlaps with rootfs1 by design */ - partition@900000 { - label = "kernel1"; - reg = <0x900000 0x7b00000>; /* 123MB */ - }; - - partition@f00000 { - label = "rootfs1"; - reg = <0xf00000 0x7500000>; /* 117MB */ - }; - - /* kernel2 overlaps with rootfs2 by design */ - partition@8400000 { - label = "kernel2"; - reg = <0x8400000 0x7b00000>; /* 123MB */ - }; - - partition@8a00000 { - label = "rootfs2"; - reg = <0x8a00000 0x7500000>; /* 117MB */ - }; - - /* last MB is for the BBT, not writable */ - partition@ff00000 { - label = "BBT"; - reg = <0xff00000 0x100000>; - }; - }; -}; - - -&pcie1 { - mwlwifi { - marvell,chainmask = <4 4>; - }; -}; - -&pcie2 { - mwlwifi { - marvell,chainmask = <4 4>; - }; -}; - -&sdhci { - pinctrl-names = "default"; - pinctrl-0 = <&sdhci_pins>; - no-1-8-v; - non-removable; - wp-inverted; - bus-width = <8>; - status = "okay"; -}; - -&usb3_1_vbus { - gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; -}; - -&usb3_1_vbus_pins { - marvell,pins = "mpp44"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts deleted file mode 100644 index b3dca335c96..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts +++ /dev/null @@ -1,322 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-only OR MIT) -/* - * Device Tree file for ipTIME NAS1dual - * - * Copyright (C) 2020 Sungbo Eo - * - * Based on armada-385-linksys.dtsi - * Copyright (C) 2015 Imre Kaloz - */ - -/dts-v1/; - -#include -#include -#include -#include "armada-385.dtsi" - -/ { - model = "ipTIME NAS1dual"; - compatible = "iptime,nas1dual", "marvell,armada385", "marvell,armada380"; - - aliases { - led-boot = &led_ready; - led-failsafe = &led_ready; - led-running = &led_ready; - led-upgrade = &led_ready; - label-mac-device = ð0; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x80000000>; /* 2GB */ - }; - - soc { - ranges = ; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pins>; - - power { - label = "Power Button"; - linux,input-type = ; - linux,code = ; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset Button"; - linux,code = ; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - - copy { - label = "USB Copy Button"; - linux,code = ; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_leds_pins>; - - led_ready: ready { - label = "blue:ready"; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - }; - - hdd { - label = "blue:hdd"; - gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - - usb { - function = LED_FUNCTION_USB; - color = ; - gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_0_port1 &usb3_0_port2>; - linux,default-trigger = "usbport"; - }; - }; - - gpio-fan { - compatible = "gpio-fan"; - pinctrl-names = "default"; - pinctrl-0 = <&gpio_fan_pins>; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>, - <&gpio1 18 GPIO_ACTIVE_HIGH>; - /* We don't know the exact rpm, just use dummy values here. */ - gpio-fan,speed-map = <0 0>, <1 1>, <2 2>; - #cooling-cells = <2>; - }; - - gpio-poweroff { - compatible = "gpio-poweroff"; - gpios = <&pca9536 1 GPIO_ACTIVE_LOW>; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&sata_power_pins>; - - reg_sata_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "sata-power"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; - regulator-always-on; - }; - }; -}; - -&ahci0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata-port@0 { - reg = <0>; - target-supply = <®_sata_power>; - #thermal-sensor-cells = <0>; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð0 { - pinctrl-names = "default"; - pinctrl-0 = <&ge0_rgmii_pins>; - status = "okay"; - phy-handle = <ðphy1>; - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; - nvmem-cells = <&macaddr_uboot_fffa8>; - nvmem-cell-names = "mac-address"; -}; - -ð1 { - pinctrl-names = "default"; - pinctrl-0 = <&ge1_rgmii_pins>; - status = "okay"; - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; - buffer-manager = <&bm>; - bm,pool-long = <2>; - bm,pool-short = <3>; - nvmem-cells = <&macaddr_uboot_fffa8>; - nvmem-cell-names = "mac-address"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; - - pca9536: gpio@41 { - compatible = "nxp,pca9536"; - reg = <0x41>; - gpio-controller; - #gpio-cells = <2>; - gpio-line-names = "power-led", "power-board"; - }; -}; - -&mdio { - pinctrl-names = "default"; - pinctrl-0 = <&mdio_pins>; - - /* LED1: On - Link, Blink - Activity, Off - No Link */ - - ethphy0: ethernet-phy@0 { - reg = <0>; - marvell,reg-init = <3 16 0 0x1017>; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; - marvell,reg-init = <3 16 0 0x1017>; - }; -}; - -&pinctrl { - gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp24", "mpp26", "mpp48"; - marvell,function = "gpio"; - }; - - gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp18", "mpp20", "mpp51"; - marvell,function = "gpio"; - }; - - gpio_fan_pins: gpio-fan-pins { - marvell,pins = "mpp25", "mpp50"; - marvell,function = "gpio"; - }; - - sata_power_pins: sata-power-pins { - marvell,pins = "mpp52"; - marvell,function = "gpio"; - }; - - uart1_pins_alt: uart-pins-1-alt { - marvell,pins = "mpp45", "mpp46"; - marvell,function = "ua1"; - }; -}; - -&spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000000 0x00100000>; - label = "u-boot"; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_uboot_fffa8: macaddr@fffa8 { - reg = <0xfffa8 0x6>; - }; - }; - }; - - partition@100000 { - reg = <0x00100000 0x03ec0000>; - label = "firmware"; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - reg = <0x00000000 0x00600000>; - label = "kernel"; - }; - - partition@600000 { - reg = <0x00600000 0x038c0000>; - label = "rootfs"; - }; - }; - - partition@3fc0000 { - reg = <0x03fc0000 0x00040000>; - label = "config"; - read-only; - }; - }; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_alt>; - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_0_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts b/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts deleted file mode 100644 index 50936e72adf..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts +++ /dev/null @@ -1,368 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for Western Digital My Cloud Mirror Gen 2 - * (BWVZ/Grand Teton) - * - * Copyright (C) 2020 - * - * Based on the code from: - * - * Copyright (C) 2019 Evgeny Kolesnikov - * Copyright (C) 2016 Martin Mueller - * Copyright (C) 2013 Gregory CLEMENT - * Copyright (C) 2014 Thomas Petazzoni - * - */ - -/dts-v1/; -#include -#include -#include -#include "armada-385.dtsi" - -/ { - model = "WD MyCloud Mirror Gen 2 (BWVZ/Grand Teton)"; - compatible = "wd,cloud-mirror-gen2", "marvell,armada385", "marvell,armada380"; - - aliases { - led-boot = &led_boot; - led-failsafe = &led_boot; - led-upgrade = &led_boot; - }; - - chosen { - stdout-path = "serial0:115200n8"; - append-rootblock = "nullparameter="; /* override the bootloader args */ - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* 512 MB */ - }; - - soc { - ranges = ; - - internal-regs { - timer@c200 { - status = "okay"; - }; - - i2c0: i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c1: i2c@11100 { - status = "okay"; - clock-frequency = <100000>; - }; - - serial@12000 { - status = "okay"; - }; - - /* Connected to Welltrend 6703F-OG240WT MCU - * which controls power, fan and other things - */ - serial@12100 { - status = "okay"; - }; - - pinctrl@18000 { - /* use only one pin for UART1, as mpp20 is used by sata0 */ - uart1_pins: uart-pins-1 { - marvell,pins = "mpp19"; - marvell,function = "ua1"; - }; - - xhci0_vbus_pins: xhci0-vbus-pins { - marvell,pins = "mpp26"; - marvell,function = "gpio"; - }; - - xhci1_vbus_pins: xhci1-vbus-pins { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - sata0_pins: sata-pins-0 { - marvell,pins = "mpp55"; - marvell,function = "sata0"; - }; - - sata1_pins: sata-pins-1 { - marvell,pins = "mpp56"; - marvell,function = "sata1"; - }; - - sata_leds: sata-leds { - marvell,pins = "mpp43", "mpp52", "mpp53", "mpp54"; - marvell,function = "gpio"; - }; - - btn_pins: btn-pins { - marvell,pins = "mpp50"; - marvell,function = "gpio"; - }; - }; - - usb@58000 { - status = "okay"; - }; - - phy: mdio@72004 { - phy0: ethernet-phy@0 { - /* Init ETH LEDs */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - sata@a8000 { - status = "okay"; - }; - - nand-controller@d0000 { - status = "okay"; - - nand: nand@0 { - reg = <0>; - label = "pxa3xx_nand-0"; - nand-rb = <0>; - marvell,nand-keep-config; - #marvell,nand-enable-arbiter; //optional - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@00000000 { - label = "U-Boot"; - reg = <0x00000000 0x00500000>; /* 5 MB */ - read-only; - }; - - partition@00500000 { - label = "kernel"; - reg = <0x00500000 0x00500000>; /* 5 MB */ - }; - - partition@00a00000 { - label = "uRamdisk"; - reg = <0x00a00000 0x00500000>; /* 5 MB */ - read-only; - }; - - partition@00f00000 { - label = "ubi"; - reg = <0x00f00000 0x0b900000>; /* 185 MB */ - }; - - partition@c800000 { - label = "rescue fw"; - reg = <0x0c800000 0x00f00000>; /* 15 MB */ - read-only; - }; - - partition@d70000 { - label = "config"; - reg = <0x0d700000 0x01400000>; /* 20 MB */ - read-only; - }; - - partition@eb00000 { - label = "reserve1"; - reg = <0x0eb00000 0x00a00000>; /* 10 MB */ - read-only; - }; - - partition@f500000 { - label = "reserve2"; - reg = <0x0f500000 0x00a00000>; /* 10 MB */ - read-only; - }; - }; - }; - }; - - usb3@f0000 { - usb-phy = <&usb3_0_phy>; - status = "okay"; - }; - - usb3@f8000 { - usb-phy = <&usb3_1_phy>; - status = "okay"; - }; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&sata_leds>; - - led_boot: s1red { - label = "red:hdd1"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; - s2red { - label = "red:hdd2"; - gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; - }; - s1blue { - label = "blue:hdd1"; - gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata1"; - }; - s2blue { - label = "blue:hdd2"; - gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ata2"; - }; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&btn_pins>; - - reset { - label = "reset"; - linux,code = ; // Restart=0x198, Power=0x116 - gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; - debounce-interval = <60>; - wakeup-source; - }; - }; - - usb3_0_phy: usb3_0_phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_0_vbus>; - }; - - usb3_1_phy: usb3_1_phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_1_vbus>; - }; - - reg_usb3_0_vbus: usb3-vbus0 { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus0"; - pinctrl-names = "default"; - pinctrl-0 = <&xhci0_vbus_pins>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - gpio = <&gpio0 26 GPIO_ACTIVE_HIGH>; - }; - - reg_usb3_1_vbus: usb3-vbus1 { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus1"; - pinctrl-names = "default"; - pinctrl-0 = <&xhci1_vbus_pins>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - gpio = <&gpio0 27 GPIO_ACTIVE_HIGH>; - }; - - reg_sata0: pwr-sata0 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-boot-on; - gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - }; - - reg_5v_sata0: v5-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata0>; - }; - - reg_12v_sata0: v12-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata0>; - }; - - reg_sata1: pwr-sata1 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-boot-on; - gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; - }; - - reg_5v_sata1: v5-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata1>; - }; - - reg_12v_sata1: v12-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata1>; - }; -}; - -&bm { - status = "okay"; -}; - -&bm_bppi { - status = "okay"; -}; - -ð2 { - status = "okay"; - phy = <&phy0>; - phy-mode = "sgmii"; - buffer-manager = <&bm>; - bm,pool-long = <0>; - bm,pool-short = <1>; -}; - -&ahci0 { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - sata-port@0 { - reg = <0>; - target-supply = <®_sata0>; - #thermal-sensor-cells = <0>; - }; - - sata-port@1 { - reg = <1>; - target-supply = <®_sata1>; - #thermal-sensor-cells = <1>; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts deleted file mode 100644 index 35f107b63b5..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "armada-3720-uDPU.dtsi" - -/ { - model = "Methode eDPU Board"; - compatible = "methode,edpu", "marvell,armada3720", "marvell,armada3710"; -}; - -/* PHY mode is set to 1000Base-X despite Maxlinear IC being capable of - * 2500Base-X since until 5.15 support for mvebu is available trying to - * use 2500Base-X will cause buffer overruns for which the fix is not - * easily backportable. - */ -ð0 { - phy-mode = "1000base-x"; -}; - -/* - * External MV88E6361 switch is only available on v2 of the board. - * U-Boot will enable the MDIO bus and switch nodes. - */ -&mdio { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&smi_pins>; - - /* Actual device is MV88E6361 */ - switch: switch@0 { - compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - phy-mode = "2500base-x"; - managed = "in-band-status"; - ethernet = <ð0>; - }; - - port@9 { - reg = <9>; - label = "downlink"; - phy-mode = "2500base-x"; - managed = "in-band-status"; - }; - - port@a { - reg = <10>; - label = "uplink"; - phy-mode = "2500base-x"; - managed = "in-band-status"; - sfp = <&sfp_eth1>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts deleted file mode 100644 index 063eb869927..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ /dev/null @@ -1,240 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device Tree file for ESPRESSObin-Ultra - * Copyright (C) 2019 Globalscale technologies, Inc. - * - * Jason Hung - */ - -/dts-v1/; - -#include -#include "armada-372x.dtsi" - -/ { - model = "Globalscale Marvell ESPRESSOBin Ultra Board"; - compatible = "globalscale,espressobin-ultra", "marvell,armada3720", - "marvell,armada3710"; - - aliases { - /* for dsa slave device */ - ethernet1 = &switch0port1; - ethernet2 = &switch0port2; - ethernet3 = &switch0port3; - ethernet4 = &switch0port4; - ethernet5 = &switch0port5; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - reg_usb3_vbus: usb3-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb3-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>; - }; - - usb3_phy: usb3-phy { - compatible = "usb-nop-xceiv"; - vcc-supply = <®_usb3_vbus>; - }; - - leds { - pinctrl-names = "default"; - compatible = "gpio-leds"; - /* No assigned functions to the LEDs by default */ - led1 { - label = "ebin-ultra:blue:led1"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - led2 { - label = "ebin-ultra:green:led2"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - led3 { - label = "ebin-ultra:red:led3"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - led4 { - label = "ebin-ultra:yellow:led4"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&pcie0 { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&sdhci0 { - status = "okay"; - non-removable; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - spi-rx-bus-width = <4>; - spi-tx-bus-width = <4>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x3e0000>; - }; - partition@3e0000 { - label = "hw-info"; - reg = <0x3e0000 0x10000>; - read-only; - }; - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&uart0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <100000>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&usb3 { - status = "okay"; - usb-phy = <&usb3_phy>; -}; - -&usb2 { - status = "okay"; -}; - -ð0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&mdio { - status = "okay"; - - extphy: ethernet-phy@0 { - reg = <1>; - }; - - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - dsa,member = <0 0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch0port0: port@0 { - reg = <0>; - ethernet = <ð0>; - }; - - switch0port1: port@1 { - reg = <1>; - label = "lan0"; - phy-handle = <&switch0phy1>; - }; - - switch0port2: port@2 { - reg = <2>; - label = "lan1"; - phy-handle = <&switch0phy2>; - }; - - switch0port3: port@3 { - reg = <3>; - label = "lan2"; - phy-handle = <&switch0phy3>; - }; - - switch0port4: port@4 { - reg = <4>; - label = "lan3"; - phy-handle = <&switch0phy4>; - }; - - switch0port5: port@5 { - reg = <5>; - label = "wan"; - phy-handle = <&extphy>; - phy-mode = "sgmii"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy1: switch0phy1@11 { - reg = <0x11>; - }; - switch0phy2: switch0phy2@12 { - reg = <0x12>; - }; - switch0phy3: switch0phy3@13 { - reg = <0x13>; - }; - switch0phy4: switch0phy4@14 { - reg = <0x14>; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts deleted file mode 100644 index e098ede75f8..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ /dev/null @@ -1,249 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) - -/dts-v1/; -#include -#include -#include -#include "armada-372x.dtsi" - -/ { - model = "GL.iNet GL-MV1000"; - compatible = "glinet,gl-mv1000", "marvell,armada3720"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - vcc_sd_reg1: regulator { - compatible = "regulator-gpio"; - regulator-name = "vcc_sd1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - gpios-states = <0>; - states = <1800000 0x1 - 3300000 0x0>; - enable-active-high; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - switch { - label = "switch"; - linux,code = ; - gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - vpn { - label = "green:vpn"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - led_power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - m25p,fast-read; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0 0xf0000>; - read-only; - }; - - partition@f0000 { - label = "u-boot-env"; - reg = <0xf0000 0x8000>; - }; - - factory: partition@f8000 { - label = "factory"; - reg = <0xf8000 0x8000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_factory_6: macaddr@6 { - reg = <0x6 0x6>; - }; - }; - }; - - partition@100000 { - label = "gl-firmware-dtb"; - reg = <0x100000 0x10000>; - read-only; - }; - - partition@110000 { - label = "gl-firmware"; - reg = <0x110000 0xef0000>; - read-only; - }; - - partition@ef0000 { - label = "gl-firmware-jffs2"; - reg = <0xef0000 0x110000>; - read-only; - }; - }; - }; -}; - -&sdhci1 { - wp-inverted; - bus-width = <4>; - cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; - marvell,pad-type = "sd"; - no-1-8-v; - vqmmc-supply = <&vcc_sd_reg1>; - status = "okay"; -}; - -&sdhci0 { - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - non-removable; - no-sd; - no-sdio; - marvell,pad-type = "fixed-1-8v"; - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&usb2 { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&mdio { - switch0: switch0@1 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - dsa,member = <0 0>; - - ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - ethernet = <ð0>; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-handle = <&switch0phy0>; - }; - - port@2 { - reg = <2>; - label = "lan0"; - phy-handle = <&switch0phy1>; - - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "lan1"; - phy-handle = <&switch0phy2>; - - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy0: switch0phy0@11 { - reg = <0x11>; - }; - switch0phy1: switch0phy1@12 { - reg = <0x12>; - }; - switch0phy2: switch0phy2@13 { - reg = <0x13>; - }; - }; - }; -}; - -ð0 { - nvmem-cells = <&macaddr_factory_0>; - nvmem-cell-names = "mac-address"; - phy-mode = "rgmii-id"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts deleted file mode 100644 index 186a5e7d7d2..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +++ /dev/null @@ -1,46 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) - -/dts-v1/; - -#include "armada-3720-uDPU.dtsi" - -/ { - model = "Methode uDPU Board"; - compatible = "methode,udpu", "marvell,armada3720", "marvell,armada3710"; - - sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&pinctrl_nb { - i2c1_recovery_pins: i2c1-recovery-pins { - groups = "i2c1"; - function = "gpio"; - }; -}; - -&i2c0 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c1_pins>; - pinctrl-1 = <&i2c1_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; -}; - -ð0 { - phy-mode = "2500base-x"; - sfp = <&sfp_eth0>; -}; - -ð1 { - phy-mode = "2500base-x"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi deleted file mode 100644 index bc8d1f10203..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi +++ /dev/null @@ -1,165 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Device tree for the uDPU board. - * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) - * Copyright (C) 2016 Marvell - * Copyright (C) 2019 Methode Electronics - * Copyright (C) 2019 Telus - * - * Vladimir Vid - */ - -/dts-v1/; - -#include -#include "armada-372x.dtsi" - -/ { - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x20000000>; - }; - - aliases { - ethernet0 = ð0; - ethernet1 = ð1; - }; - - leds { - compatible = "gpio-leds"; - - led-power1 { - label = "udpu:green:power"; - gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; - }; - - led-power2 { - label = "udpu:red:power"; - gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; - }; - - led-network1 { - label = "udpu:green:network"; - gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; - }; - - led-network2 { - label = "udpu:red:network"; - gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; - }; - - led-alarm1 { - label = "udpu:green:alarm"; - gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; - }; - - led-alarm2 { - label = "udpu:red:alarm"; - gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; - }; - }; - - sfp_eth1: sfp-eth1 { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <3000>; - }; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - mmc-ddr-1_8v; - mmc-hs400-1_8v; - marvell,pad-type = "fixed-1-8v"; - non-removable; - no-sd; - no-sdio; -}; - -&spi0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&spi_quad_pins>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <54000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "firmware"; - reg = <0x0 0x180000>; - }; - - partition@180000 { - label = "u-boot-env"; - reg = <0x180000 0x10000>; - }; - }; - }; -}; - -&pinctrl_nb { - i2c2_recovery_pins: i2c2-recovery-pins { - groups = "i2c2"; - function = "gpio"; - }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default", "recovery"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-1 = <&i2c2_recovery_pins>; - /delete-property/mrvl,i2c-fast-mode; - scl-gpios = <&gpionb 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpionb 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - temp-sensor@48 { - compatible = "ti,tmp75c"; - reg = <0x48>; - }; - - temp-sensor@49 { - compatible = "ti,tmp75c"; - reg = <0x49>; - }; -}; - -ð0 { - status = "okay"; - managed = "in-band-status"; - phys = <&comphy1 0>; -}; - -ð1 { - phy-mode = "sgmii"; - status = "okay"; - managed = "in-band-status"; - phys = <&comphy0 1>; - sfp = <&sfp_eth1>; -}; - -&usb3 { - status = "okay"; - phys = <&usb2_utmi_otg_phy>; - phy-names = "usb2-utmi-otg-phy"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts deleted file mode 100644 index 26804a48755..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* - * Device Tree file for Globalscale MOCHAbin - * Copyright (C) 2019 Globalscale technologies, Inc. - * Copyright (C) 2021 Sartura Ltd. - * - */ - -/dts-v1/; - -#include -#include "armada-7040.dtsi" - -/ { - model = "Globalscale MOCHAbin"; - compatible = "globalscale,mochabin", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &swport1; - ethernet4 = &swport2; - ethernet5 = &swport3; - ethernet6 = &swport4; - }; - - /* SFP+ 10G */ - sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c1>; - los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>; - }; - - /* SFP 1G */ - sfp_eth2: sfp-eth2 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c0>; - los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>; - }; -}; - -/* microUSB UART console */ -&uart0 { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -/* eMMC */ -&ap_sdhci0 { - status = "okay"; - - bus-width = <4>; - non-removable; - /delete-property/ marvell,xenon-phy-slow-mode; - no-1-8-v; -}; - -&cp0_pinctrl { - cp0_uart0_pins: cp0-uart0-pins { - marvell,pins = "mpp6", "mpp7"; - marvell,function = "uart0"; - }; - - cp0_spi0_pins: cp0-spi0-pins { - marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59"; - marvell,function = "spi0"; - }; - - cp0_spi1_pins: cp0-spi1-pins { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - - cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp2", "mpp3"; - marvell,function = "i2c1"; - }; - - pca9554_int_pins: pca9554-int-pins { - marvell,pins = "mpp27"; - marvell,function = "gpio"; - }; - - cp0_rgmii1_pins: cp0-rgmii1-pins { - marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - - is31_sdb_pins: is31-sdb-pins { - marvell,pins = "mpp30"; - marvell,function = "gpio"; - }; - - cp0_pcie_reset_pins: cp0-pcie-reset-pins { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - - cp0_switch_pins: cp0-switch-pins { - marvell,pins = "mpp0", "mpp1"; - marvell,function = "gpio"; - }; - - cp0_phy_pins: cp0-phy-pins { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; -}; - -/* mikroBUS UART */ -&cp0_uart0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_uart0_pins>; -}; - -/* mikroBUS SPI */ -&cp0_spi0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; -}; - -/* SPI-NOR */ -&cp0_spi1{ - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi1_pins>; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x3e0000>; - read-only; - }; - - partition@3e0000 { - label = "hw-info"; - reg = <0x3e0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -/* mikroBUS, 1G SFP and GPIO expander */ -&cp0_i2c0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - sfp_gpio: pca9554@39 { - compatible = "nxp,pca9554"; - pinctrl-names = "default"; - pinctrl-0 = <&pca9554_int_pins>; - reg = <0x39>; - - interrupt-parent = <&cp0_gpio1>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - gpio-controller; - #gpio-cells = <2>; - - /* - * IO0_0: SFP+_TX_FAULT - * IO0_1: SFP+_TX_DISABLE - * IO0_2: SFP+_PRSNT - * IO0_3: SFP+_LOSS - * IO0_4: SFP_TX_FAULT - * IO0_5: SFP_TX_DISABLE - * IO0_6: SFP_PRSNT - * IO0_7: SFP_LOSS - */ - }; -}; - -/* IS31FL3199, mini-PCIe and 10G SFP+ */ -&cp0_i2c1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c1_pins>; - clock-frequency = <100000>; - - leds@64 { - compatible = "issi,is31fl3199"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&is31_sdb_pins>; - shutdown-gpios = <&cp0_gpio1 30 GPIO_ACTIVE_HIGH>; - reg = <0x64>; - - led1_red: led@1 { - label = "red:led1"; - reg = <1>; - led-max-microamp = <20000>; - }; - - led1_green: led@2 { - label = "green:led1"; - reg = <2>; - }; - - led1_blue: led@3 { - label = "blue:led1"; - reg = <3>; - }; - - led2_red: led@4 { - label = "red:led2"; - reg = <4>; - }; - - led2_green: led@5 { - label = "green:led2"; - reg = <5>; - }; - - led2_blue: led@6 { - label = "blue:led2"; - reg = <6>; - }; - - led3_red: led@7 { - label = "red:led3"; - reg = <7>; - }; - - led3_green: led@8 { - label = "green:led3"; - reg = <8>; - }; - - led3_blue: led@9 { - label = "blue:led3"; - reg = <9>; - }; - }; -}; - -&cp0_mdio { - status = "okay"; - - /* 88E1512 PHY */ - eth2phy: ethernet-phy@1 { - reg = <1>; - sfp = <&sfp_eth2>; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_phy_pins>; - reset-gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; - }; - - /* 88E6141 Topaz switch */ - switch: switch@3 { - compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_switch_pins>; - reset-gpios = <&cp0_gpio1 0 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&cp0_gpio1>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - swport1: port@1 { - reg = <1>; - label = "lan0"; - phy-handle = <&swphy1>; - }; - - swport2: port@2 { - reg = <2>; - label = "lan1"; - phy-handle = <&swphy2>; - }; - - swport3: port@3 { - reg = <3>; - label = "lan2"; - phy-handle = <&swphy3>; - }; - - swport4: port@4 { - reg = <4>; - label = "lan3"; - phy-handle = <&swphy4>; - }; - - port@5 { - reg = <5>; - ethernet = <&cp0_eth1>; - phy-mode = "2500base-x"; - managed = "in-band-status"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - swphy1: swphy1@17 { - reg = <17>; - }; - - swphy2: swphy2@18 { - reg = <18>; - }; - - swphy3: swphy3@19 { - reg = <19>; - }; - - swphy4: swphy4@20 { - reg = <20>; - }; - }; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* 10G SFP+ */ -&cp0_eth0 { - status = "okay"; - - phy-mode = "10gbase-r"; - phys = <&cp0_comphy4 0>; - managed = "in-band-status"; - sfp = <&sfp_eth0>; -}; - -/* Topaz switch uplink */ -&cp0_eth1 { - status = "okay"; - - phy-mode = "2500base-x"; - phys = <&cp0_comphy0 1>; - - fixed-link { - speed = <2500>; - full-duplex; - }; -}; - -/* 1G SFP or 1G RJ45 */ -&cp0_eth2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_rgmii1_pins>; - - phy = <ð2phy>; - phy-mode = "rgmii-id"; -}; - -/* SMSC USB5434B hub */ -&cp0_usb3_0 { - status = "okay"; - - phys = <&cp0_comphy1 0>; - phy-names = "cp0-usb3h0-comphy"; -}; - -/* miniPCI-E USB */ -&cp0_usb3_1 { - status = "okay"; -}; - -&cp0_sata0 { - status = "okay"; - - /* 7 + 12 SATA connector (J24) */ - sata-port@0 { - phys = <&cp0_comphy2 0>; - phy-names = "cp0-sata0-0-phy"; - }; - - /* M.2-2250 B-key (J39) */ - sata-port@1 { - phys = <&cp0_comphy3 1>; - phy-names = "cp0-sata0-1-phy"; - }; -}; - -/* miniPCI-E (J5) */ -&cp0_pcie2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&cp0_pcie_reset_pins>; - phys = <&cp0_comphy5 2>; - phy-names = "cp0-pcie2-x1-phy"; - reset-gpio = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; - ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts deleted file mode 100644 index 023370a6780..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts +++ /dev/null @@ -1,406 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "armada-7040.dtsi" -#include -#include -#include - -/ { - model = "MikroTik RB5009"; - compatible = "mikrotik,rb5009", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - aliases { - led-boot = &led_user; - led-failsafe = &led_user; - led-running = &led_user; - led-upgrade = &led_user; - label-mac-device = &p1; - }; - - usb3_vbus: regulator-usb3-vbus0 { - compatible = "regulator-fixed"; - regulator-name = "usb3_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_leds: regulator-leds { - compatible = "regulator-fixed"; - regulator-name = "LED-power"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&cp0_gpio2 27 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - }; - - output-led-power { - compatible = "regulator-output"; - vout-supply = <®_leds>; - }; - - sfp_i2c: sfp-i2c { - compatible = "i2c-gpio"; - sda-gpios = <&cp0_gpio1 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - scl-gpios = <&cp0_gpio1 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&cp0_gpio1 28 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_user: user { - function = "user"; - gpios = <&cp0_gpio2 26 GPIO_ACTIVE_LOW>; - color = ; - }; - - sfp { - function = "sfp"; - gpios = <&cp0_gpio2 25 GPIO_ACTIVE_LOW>; - color = ; - }; - - hdr1 { - function = "hdr1"; - gpios = <&cp0_gpio1 4 GPIO_ACTIVE_LOW>; - color = ; - }; - - hdr2 { - function = "hdr2"; - gpios = <&cp0_gpio2 19 GPIO_ACTIVE_LOW>; - color = ; - }; - }; - - sfp: sfp { - compatible = "sff,sfp"; - i2c-bus = <&sfp_i2c>; - mod-def0-gpios = <&cp0_gpio1 11 GPIO_ACTIVE_LOW>; - los-gpios = <&cp0_gpio1 2 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&cp0_gpio1 6 GPIO_ACTIVE_HIGH>; - tx-disable-gpios = <&cp0_gpio1 5 GPIO_ACTIVE_HIGH>; - rate-select0-gpios = <&cp0_gpio1 3 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart0 { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - - -&spi0 { - status = "okay"; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - compatible = "mikrotik,routerboot-partitions"; - #address-cells = <1>; - #size-cells = <1>; - label = "MikroTik"; - reg = <0x0 0xfe0000>; - - hard_config: hard_config { - read-only; - - nvmem-layout { - compatible = "mikrotik,routerboot-nvmem"; - - macaddr_hard: base-mac-address { - #nvmem-cell-cells = <1>; - }; - }; - }; - - soft_config { - }; - - dtb_config { - read-only; - }; - }; - - partition@b0000 { - label = "RouterBOOT-primary"; - reg = <0xb0000 0x10000>; - }; - - /* Empty space on NOR repurposed for U-Boot environment */ - partition@fe0000 { - label = "u-boot-env"; - reg = <0xfe0000 0x20000>; - - nvmem-layout { - compatible = "u-boot,env"; - }; - }; - }; - }; -}; - -&cp0_nand_controller { - status = "okay"; - - nand@0 { - reg = <0>; - nand-rb = <0>; - nand-ecc-mode = "hw"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - nand-on-flash-bbt; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "YAFFS"; - reg = <0x0 0x800000>; - }; - - partition@800000 { - label = "ubi"; - reg = <0x800000 0x3f800000>; - }; - }; - }; -}; - -&cp0_utmi { - status = "okay"; -}; - -&cp0_comphy3 { - connector { - compatible = "usb-a-connector"; - phy-supply = <&usb3_vbus>; - }; -}; - -&cp0_usb3_1 { - status = "okay"; - phys = <&cp0_comphy3 1>, <&cp0_utmi1>; - phy-names = "cp0-usb3h1-comphy", "utmi"; - dr_mode = "host"; -}; - -&cp0_i2c0 { - status = "okay"; - clock-frequency = <100000>; -}; - -&cp0_mdio { - status = "okay"; -}; - -&cp0_ethernet { - status = "okay"; -}; - -&cp0_eth0 { - /* This port is connected to 88E6393X switch */ - status = "okay"; - phy-mode = "10gbase-r"; - phys = <&cp0_comphy2 0>; - managed = "in-band-status"; - nvmem-cells = <&macaddr_hard 0>; - nvmem-cell-names = "mac-address"; -}; - -&cp0_mdio { - status = "okay"; - - switch@0 { - /* Actual device is MV88E6393X */ - compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - /* LED config is lost if switch is reset */ - //reset-gpios = <&cp0_gpio2 2 GPIO_ACTIVE_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&cp0_eth0>; - phy-mode = "10gbase-r"; - managed = "in-band-status"; - }; - - port@1 { - reg = <1>; - label = "p8"; - phy-handle = <&switch0phy1>; - nvmem-cells = <&macaddr_hard 7>; - nvmem-cell-names = "mac-address"; - }; - - port@2 { - reg = <2>; - label = "p7"; - phy-handle = <&switch0phy2>; - nvmem-cells = <&macaddr_hard 6>; - nvmem-cell-names = "mac-address"; - }; - - port@3 { - reg = <3>; - label = "p6"; - phy-handle = <&switch0phy3>; - nvmem-cells = <&macaddr_hard 5>; - nvmem-cell-names = "mac-address"; - }; - - port@4 { - reg = <4>; - label = "p5"; - phy-handle = <&switch0phy4>; - nvmem-cells = <&macaddr_hard 4>; - nvmem-cell-names = "mac-address"; - }; - - port@5 { - reg = <5>; - label = "p4"; - phy-handle = <&switch0phy5>; - nvmem-cells = <&macaddr_hard 3>; - nvmem-cell-names = "mac-address"; - }; - - port@6 { - reg = <6>; - label = "p3"; - phy-handle = <&switch0phy6>; - nvmem-cells = <&macaddr_hard 2>; - nvmem-cell-names = "mac-address"; - }; - - port@7 { - reg = <7>; - label = "p2"; - phy-handle = <&switch0phy7>; - nvmem-cells = <&macaddr_hard 1>; - nvmem-cell-names = "mac-address"; - }; - - p1: port@9 { - reg = <9>; - label = "p1"; - phy-mode = "sgmii"; - phy-handle = <&qca8081>; - managed = "in-band-status"; - nvmem-cells = <&macaddr_hard 0>; - nvmem-cell-names = "mac-address"; - }; - - port@a { - reg = <10>; - label = "sfp"; - phy-mode = "10gbase-r"; - managed = "in-band-status"; - sfp = <&sfp>; - nvmem-cells = <&macaddr_hard 8>; - nvmem-cell-names = "mac-address"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch0phy1: switch0phy1@1 { - reg = <0x1>; - }; - - switch0phy2: switch0phy2@2 { - reg = <0x2>; - }; - - switch0phy3: switch0phy3@3 { - reg = <0x3>; - }; - - switch0phy4: switch0phy4@4 { - reg = <0x4>; - }; - - switch0phy5: switch0phy5@5 { - reg = <0x5>; - }; - - switch0phy6: switch0phy6@6 { - reg = <0x6>; - }; - - switch0phy7: switch0phy7@7 { - reg = <0x7>; - }; - }; - - mdio1 { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - - qca8081: qca8081@0 { - reg = <0>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_WAN; - default-state = "keep"; - active-low; - }; - }; - }; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts deleted file mode 100644 index 62fed800000..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts +++ /dev/null @@ -1,425 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include -#include -#include -#include -#include "armada-7040.dtsi" - -/ { - model = "Check Point V-80"; - compatible = "checkpoint,v-80", "marvell,armada7040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - aliases { - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - mmc0 = &ap_sdhci0; - mmc1 = &cp0_sdhci0; - led-boot = &led_power_blue; - led-failsafe = &led_power_red; - led-running = &led_power_blue; - led-upgrade = &led_power_blue; - label-mac-device = &cp0_eth1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x80000000>; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_gpio_keys_pins>; - pinctrl-names = "default"; - - button-reset { - label = "reset"; - gpios = <&cp0_gpio1 12 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_gpio_leds_pins>; - pinctrl-names = "default"; - - /* populated but no hole on the case */ - led-0 { - gpios = <&cp0_gpio1 13 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_WLAN; - }; - - led_power_red: led-1 { - gpios = <&cp0_gpio1 23 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led-2 { - gpios = <&cp0_gpio1 26 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_WAN_ONLINE; - }; - - /* populated but no hole on the case */ - led-3 { - gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_WLAN; - }; - - led_power_blue: led-4 { - gpios = <&cp0_gpio2 2 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_POWER; - }; - - led-5 { - gpios = <&cp0_gpio2 19 GPIO_ACTIVE_LOW>; - color = ; - function = "management"; - }; - - led-6 { - gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; - color = ; - function = "management"; - }; - - led-7 { - gpios = <&cp0_gpio2 22 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_WAN_ONLINE; - }; - }; - - regulator-usb-vbus { - compatible = "regulator-fixed"; - pinctrl-0 = <&pmx_reg_usb_vbus_pins>; - pinctrl-names = "default"; - regulator-name = "usb-vbus"; - gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - }; -}; - -/* USB Type-C UART console */ -&uart0 { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -/* - * internal MicroSD slot - * (Note: not populated on some HW versions) - */ -&ap_sdhci0 { - status = "okay"; - - pinctrl-0 = <&pmx_ap_sdhci0_pins>; - pinctrl-names = "default"; - bus-width = <4>; - cd-gpios = <&cp0_gpio1 6 GPIO_ACTIVE_LOW>; - /* - * Not stable in HS modes - phy needs "more calibration", so add - * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. - */ - marvell,xenon-phy-slow-mode; - no-1-8-v; -}; - -&cp0_pinctrl { - pinctrl-0 = <&pmx_board_id_pins>; - pinctrl-names = "default"; - - pmx_ap_sdhci0_pins: ap-sdhci0-pins { - marvell,pins = "mpp6"; - marvell,function = "gpio"; - }; - - pmx_cp0_mdio_pins: cp0-mdio-pins { - marvell,pins = "mpp27", "mpp28"; - marvell,function = "ge"; - }; - - pmx_cp0_spi1_pins: cp0-spi1-pins { - marvell,pins = "mpp47", "mpp48", "mpp49", "mpp50"; - marvell,function = "spi1"; - }; - - pmx_cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - pmx_cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp2", "mpp3"; - marvell,function = "i2c1"; - }; - - pmx_cp0_sdhci0_pins: cp0-sdhci0-pins { - marvell,pins = "mpp56", "mpp57", "mpp58", "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - - pmx_gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp13", "mpp23", "mpp26", "mpp33", "mpp34", "mpp51", - "mpp52", "mpp54"; - marvell,function = "gpio"; - }; - - pmx_reg_usb_vbus_pins: reg-usb-vbus-pins { - marvell,pins = "mpp24"; - marvell,function = "gpio"; - }; - - pmx_board_id_pins: board-id-pins { - marvell,pins = "mpp4", "mpp10", "mpp62"; - marvell,function = "gpio"; - }; - - pmx_eeprom_wp_pins: eeprom-wp-pins { - marvell,pins = "mpp55"; - marvell,function = "gpio"; - }; -}; - -&cp0_mdio { - status = "okay"; - - pinctrl-0 = <&pmx_cp0_mdio_pins>; - pinctrl-names = "default"; - - /* Marvell 88E6352 */ - switch@0 { - compatible = "marvell,mv88e6085"; - reg = <0x0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - swport0: port@0 { - reg = <0x0>; - label = "lan5"; - phy-handle = <&swphy0>; - }; - - swport1: port@1 { - reg = <0x1>; - label = "lan4"; - phy-handle = <&swphy1>; - }; - - swport2: port@2 { - reg = <0x2>; - label = "lan3"; - phy-handle = <&swphy2>; - }; - - swport3: port@3 { - reg = <0x3>; - label = "lan2"; - phy-handle = <&swphy3>; - }; - - swport4: port@4 { - reg = <0x4>; - label = "lan1"; - phy-handle = <&swphy4>; - }; - - port@5 { - reg = <0x5>; - ethernet = <&cp0_eth0>; - phy-connection-type = "sgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - swphy0: switch-phy@0 { - reg = <0x0>; - }; - - swphy1: switch-phy@1 { - reg = <0x1>; - }; - - swphy2: switch-phy@2 { - reg = <0x2>; - }; - - swphy3: switch-phy@3 { - reg = <0x3>; - }; - - swphy4: switch-phy@4 { - reg = <0x4>; - }; - }; - }; - - /* Marvell 88E1512 */ - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0x1>; - /* - * LED[0] (Green): LINK/ACT - * LED[1] (Amber): SPEED 100/1000M - */ - marvell,reg-init = <3 16 0 0x61>; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* LAN1-5 (Switch) */ -&cp0_eth0 { - status = "okay"; - - phy-connection-type = "sgmii"; - phys = <&cp0_comphy2 0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -/* "WAN" */ -&cp0_eth1 { - status = "okay"; - - phy-connection-type = "sgmii"; - phy-handle = <ðphy1>; - phys = <&cp0_comphy0 1>; -}; - -&cp0_gpio1 { - board-id-1 { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - input; - }; - - board-id-0 { - gpio-hog; - gpios = <10 GPIO_ACTIVE_HIGH>; - input; - }; -}; - -&cp0_gpio2 { - board-id-2 { - gpio-hog; - gpios = <30 GPIO_ACTIVE_HIGH>; - input; - }; -}; - -/* 2x NCT7802Y, EEPROM */ -&cp0_i2c0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmx_cp0_i2c0_pins>; - clock-frequency = <100000>; - - hwmon@28 { - compatible = "nuvoton,nct7802"; - reg = <0x28>; - }; - - hwmon@29 { - compatible = "nuvoton,nct7802"; - reg = <0x29>; - }; - - /* Giantec GT24C04A */ - eeprom@54 { - compatible = "atmel,24c04"; - pinctrl-0 = <&pmx_eeprom_wp_pins>; - pinctrl-names = "default"; - reg = <0x54>; - wp-gpios = <&cp0_gpio2 23 GPIO_ACTIVE_HIGH>; - read-only; - }; -}; - -/* RTC */ -&cp0_i2c1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmx_cp0_i2c1_pins>; - clock-frequency = <100000>; - - rtc@68 { - compatible = "dallas,ds1337"; - reg = <0x68>; - }; -}; - -/* eMMC */ -&cp0_sdhci0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmx_cp0_sdhci0_pins>; - bus-width = <4>; - non-removable; -}; - -/* - * mPCIe slot - * (Note: not populated on some HW versions) - */ -&cp0_pcie2 { - status = "okay"; - - phys = <&cp0_comphy5 2>; - phy-names = "cp0-pcie2-x1-phy"; -}; - -&cp0_utmi { - status = "okay"; -}; - -/* USB 3.0 Type-A */ -&cp0_usb3_0 { - status = "okay"; - - dr_mode = "host"; - phys = <&cp0_comphy1 0>, <&cp0_utmi0>; - phy-names = "cp0-usb3h0-comphy", "utmi"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts deleted file mode 100644 index a32be5b558b..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts +++ /dev/null @@ -1,514 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include -#include -#include -#include -#include "armada-8040.dtsi" - -/ { - model = "Check Point V-81"; - compatible = "checkpoint,v-81", "marvell,armada8040", - "marvell,armada-ap806-quad", "marvell,armada-ap806"; - - aliases { - ethernet0 = &cp0_eth0; - ethernet1 = &cp1_eth1; - ethernet2 = &cp1_eth2; - mmc0 = &ap_sdhci0; - mmc1 = &cp0_sdhci0; - led-boot = &led_power_blue; - led-failsafe = &led_power_red; - led-running = &led_power_blue; - led-upgrade = &led_power_blue; - label-mac-device = &cp1_eth2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000 0x80000000>; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&pmx_gpio_keys_pins>; - pinctrl-names = "default"; - - button-reset { - label = "reset"; - gpios = <&cp1_gpio1 31 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&pmx_gpio_leds_pins>; - pinctrl-names = "default"; - - led-0 { - gpios = <&cp1_gpio1 2 GPIO_ACTIVE_LOW>; - color = ; - function = "management"; - }; - - led-1 { - gpios = <&cp1_gpio1 3 GPIO_ACTIVE_LOW>; - color = ; - function = "management"; - }; - - led-2 { - gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_WAN_ONLINE; - }; - - led-3 { - gpios = <&cp1_gpio1 7 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_WAN_ONLINE; - }; - - led_power_red: led-4 { - gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_POWER; - }; - - /* populated but no hole on the case ("LTE" or "DSL") */ - led-5 { - gpios = <&cp1_gpio1 14 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_MOBILE; - }; - - /* populated but no hole on the case ("LTE" or "DSL") */ - led-6 { - gpios = <&cp1_gpio1 15 GPIO_ACTIVE_LOW>; - color = ; - function = LED_FUNCTION_MOBILE; - }; - - /* populated but no hole on the case */ - led-7 { - gpios = <&cp1_gpio1 16 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN; - }; - - /* populated but no hole on the case */ - led-8 { - gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN; - }; - - led_power_blue: led-9 { - gpios = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_POWER; - }; - - /* populated but no hole on the case (unused) */ - led-10 { - gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; - color = ; - function = "unused"; - }; - }; - - regulator-usb-vbus { - compatible = "regulator-fixed"; - regulator-name = "usb-vbus"; - gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - }; - - sfp: sfp { - /* - * Note: port LEDs on RJ45/SFP are switched - * by pin7 on &cp0_gpio2 - * - * - HIGH: RJ45 - * - LOW : SFP - */ - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c1>; - los-gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; - tx-disable-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; - tx-fault-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <2000>; - }; -}; - -/* USB Type-C UART console */ -&uart0 { - status = "okay"; - - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&ap_pinctrl { - pmx_ap_sdhci0_pins: ap-sdhci0-pins { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; -}; - -/* MicroSD slot */ -&ap_sdhci0 { - status = "okay"; - - pinctrl-0 = <&pmx_ap_sdhci0_pins>; - pinctrl-names = "default"; - bus-width = <4>; - cd-gpios = <&ap_gpio 12 GPIO_ACTIVE_LOW>; - /* - * Not stable in HS modes - phy needs "more calibration", so add - * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes. - */ - marvell,xenon-phy-slow-mode; - no-1-8-v; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* LAN1-8 (Switch) */ -&cp0_eth0 { - status = "okay"; - - phy-connection-type = "10gbase-r"; - phys = <&cp0_comphy2 0>; - - fixed-link { - speed = <10000>; - full-duplex; - }; -}; - -/* 2x PCA9555, 2x NCT7802Y, TCA9534A */ -&cp0_i2c0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmx_cp0_i2c0_pins>; - clock-frequency = <100000>; - - gpio3: gpio@21 { - pinctrl-0 = <&pmx_pca9555_pins>; - pinctrl-names = "default"; - compatible = "nxp,pca9555"; - reg = <0x21>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&cp0_gpio2>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@22 { - compatible = "nxp,pca9555"; - reg = <0x22>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon@2b { - compatible = "nuvoton,nct7802"; - reg = <0x2b>; - }; - - hwmon@2d { - compatible = "nuvoton,nct7802"; - reg = <0x2d>; - }; - - /* TI TCA9534A */ - gpio5: gpio@3b { - compatible = "nxp,pca9534"; - reg = <0x3b>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -/* EEPROM */ -&cp0_i2c1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmx_cp0_i2c1_pins>; - clock-frequency = <100000>; - - /* Giantec GT24C04A */ - eeprom@54 { - compatible = "atmel,24c04"; - reg = <0x54>; - wp-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; - read-only; - }; -}; - -&cp0_mdio { - status = "okay"; - - pinctrl-0 = <&pmx_cp0_mdio_pins>; - pinctrl-names = "default"; - - /* Marvell 88E6393X */ - switch@0 { - compatible = "marvell,mv88e6190"; - reg = <0x0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - ethernet = <&cp0_eth0>; - phy-connection-type = "10gbase-r"; - - fixed-link { - speed = <10000>; - full-duplex; - }; - }; - - swport1: port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&swphy1>; - }; - - swport2: port@2 { - reg = <2>; - label = "lan2"; - phy-handle = <&swphy2>; - }; - - swport3: port@3 { - reg = <3>; - label = "lan3"; - phy-handle = <&swphy3>; - }; - - swport4: port@4 { - reg = <4>; - label = "lan4"; - phy-handle = <&swphy4>; - }; - - swport5: port@5 { - reg = <5>; - label = "lan5"; - phy-handle = <&swphy5>; - }; - - swport6: port@6 { - reg = <6>; - label = "lan6"; - phy-handle = <&swphy6>; - }; - - swport7: port@7 { - reg = <7>; - label = "lan7"; - phy-handle = <&swphy7>; - }; - - swport8: port@8 { - reg = <8>; - label = "lan8"; - phy-handle = <&swphy8>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - swphy1: switch-phy@1 { - reg = <0x1>; - }; - - swphy2: switch-phy@2 { - reg = <0x2>; - }; - - swphy3: switch-phy@3 { - reg = <0x3>; - }; - - swphy4: switch-phy@4 { - reg = <0x4>; - }; - - swphy5: switch-phy@5 { - reg = <0x5>; - }; - - swphy6: switch-phy@6 { - reg = <0x6>; - }; - - swphy7: switch-phy@7 { - reg = <0x7>; - }; - - swphy8: switch-phy@8 { - reg = <0x8>; - }; - }; - }; -}; - -&cp0_pinctrl { - pmx_cp0_mdio_pins: cp0-mdio-pins { - marvell,pins = "mpp32", "mpp34"; - marvell,function = "ge"; - }; - - pmx_cp0_spi1_pins: cp0-spi0-pins { - marvell,pins = "mpp40", "mpp41", "mpp42", "mpp43"; - marvell,function = "spi0"; - }; - - pmx_cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - pmx_cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - - pmx_cp0_sdhci0_pins: cp0-sdhci0-pins { - marvell,pins = "mpp56", "mpp57","mpp58", "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - - pmx_cp1_rgmii1_pins: cp1-rgmii1-pins { - marvell,pins = "mpp44", "mpp45", "mpp46", "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - - pmx_pca9555_pins: pca9555-pins { - marvell,pins = "mpp33"; - marvell,function = "gpio"; - }; -}; - -/* eMMC */ -&cp0_sdhci0 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pmx_cp0_sdhci0_pins>; - bus-width = <4>; - non-removable; -}; - -&cp0_utmi { - status = "okay"; -}; - -/* USB 3.0 Type-A */ -&cp0_usb3_0 { - status = "okay"; - - dr_mode = "host"; - phys = <&cp0_comphy1 0>, <&cp0_utmi0>; - phy-names = "cp0-usb3h0-comphy", "utmi"; -}; - -&cp1_ethernet { - status = "okay"; - - pinctrl-0 = <&pmx_cp1_rgmii1_pins>; - pinctrl-names = "default"; -}; - -/* "DMZ" (RJ45/SFP) */ -&cp1_eth1 { - status = "okay"; - - phy-connection-type = "rgmii-id"; - phy-handle = <ðphy0>; -}; - -/* "WAN" */ -&cp1_eth2 { - status = "okay"; - - phy-connection-type = "sgmii"; - phy-handle = <ðphy1>; - phys = <&cp1_comphy1 2>; -}; - -&cp1_mdio { - status = "okay"; - - pinctrl-0 = <&pmx_cp1_mdio_pins>; - pinctrl-names = "default"; - - /* Marvell 88E1512 */ - ethphy0: ethernet-phy@0 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - /* - * LED[0] (Green): LINK/ACT - * LED[1] (Amber): SPEED 100/1000M - */ - marvell,reg-init = <3 16 0 0x61>; - sfp = <&sfp>; - }; - - /* Marvell 88E1512 */ - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-id0141,0dd1", - "ethernet-phy-ieee802.3-c22"; - reg = <0x1>; - /* - * LED[0] (Green): LINK/ACT - * LED[1] (Amber): SPEED 100/1000M - */ - marvell,reg-init = <3 16 0 0x61>; - }; -}; - -&cp1_pinctrl { - pmx_gpio_keys_pins: gpio-keys-pins { - marvell,pins = "mpp31"; - marvell,function = "gpio"; - }; - - pmx_gpio_leds_pins: gpio-leds-pins { - marvell,pins = "mpp2", "mpp3", "mpp6", "mpp7", "mpp11", "mpp14", - "mpp15", "mpp16", "mpp24", "mpp26"; - marvell,function = "gpio"; - }; - - pmx_cp1_mdio_pins: mdio-pins { - marvell,pins = "mpp4", "mpp5"; - marvell,function = "ge"; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts deleted file mode 100644 index 15e19fb932d..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts +++ /dev/null @@ -1,513 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright SolidRun Ltd. - * Copyright (C) 2024 Tobias Schramm - * - * Device tree for the CN9130-based ClearFog Pro - */ - -#include "cn9130.dtsi" - -#include -#include - -/ { - model = "SolidRun ClearFog Pro"; - compatible = "solidrun,clearfog-pro", "marvell,armada-ap807-quad", - "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - i2c0 = &cp0_i2c0; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - spi1 = &cp0_spi1; - }; - - memory@00000000 { - reg = <0x0 0x0 0x1 0x0>; - device_type = "memory"; - }; - - /* Virtual regulator, root of power tree */ - vin: regulator-vin { - compatible = "regulator-fixed"; - regulator-name = "vin"; - regulator-always-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* Regulators supplied by vin */ - v_5v0: regulator-v_5v0 { - compatible = "regulator-fixed"; - regulator-name = "v_5v0"; - regulator-always-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vin>; - }; - - v_3v3: regulator-v_3v3 { - compatible = "regulator-fixed"; - regulator-name = "v_3v3"; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vin>; - }; - - /* Regulators supplied by v_5v0 */ - v_1v8: regulator-v_1v8 { - compatible = "regulator-fixed"; - regulator-name = "v_1v8"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&v_5v0>; - }; - - v_5v0_usb3_hst_vbus: regulator-v_5v0_usb3_hst_vbus { - compatible = "regulator-fixed"; - regulator-name = "v_5v0_usb3_hst_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpios = <&expander0 6 GPIO_ACTIVE_LOW>; - vin-supply = <&v_5v0>; - }; - - /* Regulators internal to SOM */ - vqmmc: regulator-vqmmc { - compatible = "regulator-fixed"; - regulator-name = "vqmmc"; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&v_5v0>; - }; - - cp0_usb3_0_phy1: cp0_usb3_phy@1 { - compatible = "usb-nop-xceiv"; - vbus-supply = <&v_5v0_usb3_hst_vbus>; - }; - - cp0_sfp_eth0: sfp-eth@0 { - compatible = "sff,sfp"; - i2c-bus = <&cp0_i2c1>; - los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; - maximum-power-milliwatt = <2000>; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_button_pin>; - - reset { - label = "Reset"; - linux,code = ; - gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -/* on-board eMMC */ -&ap_sdhci0 { - bus-width = <8>; - pinctrl-names = "default"; - vqmmc-supply = <&vqmmc>; - status = "okay"; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_ethernet { - status = "okay"; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - clock-frequency = <100000>; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&cp0_gpio1>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_expander0_pins>; - vcc-supply = <&v_3v3>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - }; - - /* ADC only for mikroBUS connector */ - mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* EEPROM on the SOM */ - eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - read-only; - - nvmem-layout { - compatible = "onie,tlv-layout"; - - onie_tlv_macaddr: mac-address { - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -/* SMBUS on mini PCIe sockets */ -&cp0_i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c1_pins>; - clock-frequency = <100000>; -}; - -&cp0_mdio { - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - /* Green led blinks on activity, orange LED on link */ - marvell,reg-init = <3 16 0 0x0064>; - }; - - switch@4 { - compatible = "marvell,mv88e6085"; - reg = <4>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&cp0_gpio1>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_dsa0_pins>; - reset-gpios = <&cp0_gpio1 27 GPIO_ACTIVE_LOW>; - - mdio-external { - compatible = "marvell,mv88e6xxx-mdio-external"; - #address-cells = <1>; - #size-cells = <0>; - - /* 88E1512 PHY */ - port6_phy: ethernet-phy@1 { - reg = <1>; - }; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan5"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan2"; - }; - - port@4 { - reg = <4>; - label = "lan1"; - }; - - port@5 { - reg = <5>; - ethernet = <&cp0_eth1>; - label = "cpu"; - phy-mode = "rgmii-id"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - phy-handle = <&port6_phy>; - phy-mode = "rgmii-id"; - }; - }; - }; -}; - -/* SRDS #0 - SATA on bottom M.2 B-Key connector */ -&cp0_sata0 { - status = "okay"; - - sata-port@0 { - status = "disabled"; - }; - - sata-port@1 { - phys = <&cp0_comphy0 1>; - target-supply = <&v_3v3>; - }; -}; - -&cp0_utmi { - status = "okay"; -}; - -/* mini PCIe slot far from SOM, USB 2.0 only, SS lanes unused */ -&cp0_usb3_0 { - status = "okay"; - phys = <&cp0_utmi0>; - phy-names = "utmi"; - dr_mode = "host"; -}; - -/* SRDS #1 - USB-A 3.0 host port */ -&cp0_usb3_1 { - status = "okay"; - phys = <&cp0_utmi1>, <&cp0_comphy1 0>; - phy-names = "utmi", "usb"; - usb-phy = <&cp0_usb3_0_phy1>; - dr_mode = "host"; -}; - -/* SRDS #2 - SFP+ 10GE */ -&cp0_eth0 { - status = "okay"; - phy-mode = "10gbase-r"; - phys = <&cp0_comphy2 0>; - managed = "in-band-status"; - nvmem-cells = <&onie_tlv_macaddr 0>; - nvmem-cell-names = "mac-address"; - sfp = <&cp0_sfp_eth0>; -}; - -/* SRDS #3 - SGMII 1GE to L2 switch */ -&cp0_eth1 { - status = "okay"; - phys = <&cp0_comphy3 1>; - phy-mode = "sgmii"; - nvmem-cells = <&onie_tlv_macaddr 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -/* SRDS #4 - mini PCIe slot near SOM */ -&cp0_pcie1 { - status = "okay"; - phys = <&cp0_comphy4 1>; - num-lanes = <1>; - reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>; -}; - -/* SRDS #5 - mini PCIe slot far from SOM */ -&cp0_pcie2 { - status = "okay"; - phys = <&cp0_comphy5 2>; - num-lanes = <1>; - reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>; -}; - -/* GE PHY RGMII */ -&cp0_eth2 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_ge2_rgmii_pins>; - phy = <&phy0>; - phy-mode = "rgmii-id"; - nvmem-cells = <&onie_tlv_macaddr 2>; - nvmem-cell-names = "mac-address"; -}; - -/* micro SD card slot */ -&cp0_sdhci0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_sdhci_pins &cp0_sdhci_cd_pins>; - bus-width = <4>; - cd-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>; - no-1-8-v; - vqmmc-supply = <&v_3v3>; - vmmc-supply = <&v_3v3>; -}; - -&cp0_spi1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi1_pins>; - - spi-flash@0 { - compatible = "jedec,spi-nor"; - reg = <0x0>; - #address-cells = <0x1>; - #size-cells = <0x1>; - spi-max-frequency = <10000000>; - }; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - - cp0_i2c0_pins: cp0-i2c0-pins { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - - cp0_i2c1_pins: cp0-i2c1-pins { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - - cp0_ge2_rgmii_pins: cp0-ge2-rgmii-pins { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - - cp0_sdhci_cd_pins: cp0-sdhci-cd-pins { - marvell,pins = "mpp43"; - marvell,function = "sdio"; - }; - - cp0_sdhci_pins: cp0-sdhci-pins { - marvell,pins = "mpp56", "mpp57", "mpp58", - "mpp59", "mpp60", "mpp61"; - marvell,function = "sdio"; - }; - - cp0_spi1_pins: cp0-spi1-pins { - marvell,pins = "mpp12", "mpp13", "mpp14", - "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - - cp0_dsa0_pins: cp0-dsa0-pins { - marvell,pins = "mpp27", "mpp29"; - marvell,function = "gpio"; - }; - - cp0_button_pin: cp0-button-pin { - marvell,pins = "mpp32"; - marvell,function = "gpio"; - }; - - cp0_expander0_pins: cp0-expander0-pins { - marvell,pins = "mpp4"; - marvell,function = "gpio"; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts deleted file mode 100644 index 90d6e855be8..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts +++ /dev/null @@ -1,447 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright (C) 2019 Marvell International Ltd. - * - * Device tree for the CN9131-DB board. - */ - -#include "cn9130.dtsi" -#include "puzzle-thermal.dtsi" - -#include -#include -#include - -/ { - model = "iEi Puzzle-M901"; - compatible = "iei,puzzle-m901", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - i2c0 = &cp1_i2c0; - i2c1 = &cp0_i2c0; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - ethernet5 = &cp1_eth2; - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - led-boot = &led_power; - led-failsafe = &led_info; - led-running = &led_power; - led-upgrade = &led_info; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = ; - gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; - - thermal-zones { - chassis0-thermal { - thermal-sensors = <&puzzle_hwmon 0>; - PUZZLE_FAN_CHASSIS_THERMAL(chassis0, &chassis_fan_group0); - }; - - chassis1-thermal { - thermal-sensors = <&puzzle_hwmon 1>; - PUZZLE_FAN_CHASSIS_THERMAL(chassis1, &chassis_fan_group0); - }; - - cp0-phy0-thermal { - thermal-sensors = <&cp0_nbaset_phy0>; - PUZZLE_FAN_THERMAL(cp0_phy0, &chassis_fan_group0); - }; - - cp0-phy1-thermal { - thermal-sensors = <&cp0_nbaset_phy1>; - PUZZLE_FAN_THERMAL(cp0_phy1, &chassis_fan_group0); - }; - - cp0-phy2-thermal { - thermal-sensors = <&cp0_nbaset_phy2>; - PUZZLE_FAN_THERMAL(cp0_phy2, &chassis_fan_group0); - }; - - cp1-phy0-thermal { - thermal-sensors = <&cp1_nbaset_phy0>; - PUZZLE_FAN_THERMAL(cp1_phy0, &chassis_fan_group0); - }; - - cp1-phy1-thermal { - thermal-sensors = <&cp1_nbaset_phy1>; - PUZZLE_FAN_THERMAL(cp1_phy1, &chassis_fan_group0); - }; - - cp1-phy2-thermal { - thermal-sensors = <&cp1_nbaset_phy2>; - PUZZLE_FAN_THERMAL(cp1_phy2, &chassis_fan_group0); - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&cp0_uart0 { - status = "okay"; - - puzzle-mcu { - compatible = "iei,wt61p803-puzzle"; - #address-cells = <1>; - #size-cells = <1>; - current-speed = <115200>; - enable-beep; - status = "okay"; - - leds { - compatible = "iei,wt61p803-puzzle-leds"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - led@0 { - reg = <0>; - label = "white:network"; - active-low; - }; - - led@1 { - reg = <1>; - label = "green:cloud"; - active-low; - }; - - led_info: led@2 { - reg = <2>; - label = "orange:info"; - active-low; - }; - - led_power: led@3 { - reg = <3>; - function = LED_FUNCTION_POWER; - color = ; - active-low; - default-state = "on"; - }; - }; - - puzzle_hwmon: hwmon { - compatible = "iei,wt61p803-puzzle-hwmon"; - #address-cells = <1>; - #size-cells = <0>; - #thermal-sensor-cells = <1>; - - chassis_fan_group0: fan-group@0 { - #cooling-cells = <2>; - reg = <0x00>; - cooling-levels = <0 159 195 211 223 241 255>; - }; - }; - }; -}; - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - status = "okay"; - mmc-ddr-1_8v; - mmc-hs400-1_8v; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_xmdio { - status = "okay"; - cp0_nbaset_phy0: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - #thermal-sensor-cells = <0>; - }; - cp0_nbaset_phy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - #thermal-sensor-cells = <0>; - }; - cp0_nbaset_phy2: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - #thermal-sensor-cells = <0>; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy2 0>; - phy = <&cp0_nbaset_phy0>; -}; - -&cp0_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy4 1>; - phy = <&cp0_nbaset_phy1>; -}; - -&cp0_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy5 2>; - phy = <&cp0_nbaset_phy2>; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - status = "okay"; - clock-frequency = <100000>; - rtc@32 { - compatible = "epson,rx8130"; - reg = <0x32>; - wakeup-source; - }; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_pcie0 { - status = "okay"; - num-lanes = <2>; - num-viewport = <8>; - phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>; -}; - -/* U55 */ -&cp0_spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>, /* control */ - <0x2000000 0x1000000>; /* CS0 */ - status = "okay"; - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <40000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x1f0000>; - }; - partition@1f0000 { - label = "U-Boot ENV Factory"; - reg = <0x1f0000 0x10000>; - }; - partition@200000 { - label = "Reserved"; - reg = <0x200000 0x1f0000>; - }; - partition@3f0000 { - label = "U-Boot ENV"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&cp0_rtc { - status = "disabled"; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - }; -}; - -/* - * Instantiate the first connected CP115 - */ - -#define CP11X_NAME cp1 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "okay"; -}; - -&cp1_xmdio { - status = "okay"; - cp1_nbaset_phy0: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - #thermal-sensor-cells = <0>; - }; - cp1_nbaset_phy1: ethernet-phy@4 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - #thermal-sensor-cells = <0>; - }; - cp1_nbaset_phy2: ethernet-phy@5 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - #thermal-sensor-cells = <0>; - }; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy2 0>; - phy = <&cp1_nbaset_phy0>; -}; - -&cp1_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy4 1>; - phy = <&cp1_nbaset_phy1>; -}; - -&cp1_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy5 2>; - phy = <&cp1_nbaset_phy2>; -}; - -&cp1_sata0 { - status = "okay"; - sata-port@1 { - status = "okay"; - phys = <&cp1_comphy0 1>; - }; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; -}; - -&cp1_rtc { - status = "disabled"; -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - cp1_sfp_pins: sfp-pins { - marvell,pins = "mpp8", "mpp9", "mpp10", "mpp11"; - marvell,function = "gpio"; - }; - }; -}; - -&cp1_usb3_1 { - status = "okay"; - phys = <&cp1_comphy3 1>; - phy-names = "usb"; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts deleted file mode 100644 index 0c042f12ded..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts +++ /dev/null @@ -1,631 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) -/* - * Copyright (C) 2019 Marvell International Ltd. - * - * Device tree for the CN9132-DB board. - */ - -#include "cn9130.dtsi" -#include "puzzle-thermal.dtsi" - -#include -#include -#include - -/ { - model = "iEi Puzzle-M902"; - compatible = "iei,puzzle-m902", - "marvell,armada-ap807-quad", "marvell,armada-ap807"; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - aliases { - i2c0 = &cp1_i2c0; - i2c1 = &cp0_i2c0; - gpio1 = &cp0_gpio1; - gpio2 = &cp0_gpio2; - gpio3 = &cp1_gpio1; - gpio4 = &cp1_gpio2; - gpio5 = &cp2_gpio1; - gpio6 = &cp2_gpio2; - ethernet0 = &cp0_eth0; - ethernet1 = &cp0_eth1; - ethernet2 = &cp0_eth2; - ethernet3 = &cp1_eth0; - ethernet4 = &cp1_eth1; - ethernet5 = &cp1_eth2; - ethernet6 = &cp2_eth0; - ethernet7 = &cp2_eth1; - ethernet8 = &cp2_eth2; - spi1 = &cp0_spi0; - spi2 = &cp0_spi1; - led-boot = &led_power; - led-failsafe = &led_info; - led-running = &led_power; - led-upgrade = &led_info; - }; - - memory@00000000 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - gpio_keys { - compatible = "gpio-keys"; - - reset { - label = "Reset"; - linux,code = ; - gpios = <&cp0_gpio2 4 GPIO_ACTIVE_LOW>; - }; - }; - - cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci0-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpios = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy0: cp2_usb3_phy0 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus0>; - }; - - cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 { - compatible = "regulator-fixed"; - regulator-name = "cp2-xhci1-vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpios = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>; - }; - - cp2_usb3_0_phy1: cp2_usb3_phy1 { - compatible = "usb-nop-xceiv"; - vcc-supply = <&cp2_reg_usb3_vbus1>; - }; - - cp2_sfp_eth0: sfp-eth0 { - compatible = "sff,sfp"; - i2c-bus = <&cp2_sfpp0_i2c>; - los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; - - thermal-zones { - chassis0-thermal { - thermal-sensors = <&puzzle_hwmon 0>; - PUZZLE_FAN_CHASSIS_THERMAL(chassis0, &chassis_fan_group0); - }; - - chassis1-thermal { - thermal-sensors = <&puzzle_hwmon 1>; - PUZZLE_FAN_CHASSIS_THERMAL(chassis1, &chassis_fan_group0); - }; - - cp0-phy0-thermal { - thermal-sensors = <&cp0_nbaset_phy0>; - PUZZLE_FAN_THERMAL(cp0_phy0, &chassis_fan_group0); - }; - - cp0-phy1-thermal { - thermal-sensors = <&cp0_nbaset_phy1>; - PUZZLE_FAN_THERMAL(cp0_phy1, &chassis_fan_group0); - }; - - cp0-phy2-thermal { - thermal-sensors = <&cp0_nbaset_phy2>; - PUZZLE_FAN_THERMAL(cp0_phy2, &chassis_fan_group0); - }; - - cp1-phy0-thermal { - thermal-sensors = <&cp1_nbaset_phy0>; - PUZZLE_FAN_THERMAL(cp1_phy0, &chassis_fan_group0); - }; - - cp1-phy1-thermal { - thermal-sensors = <&cp1_nbaset_phy1>; - PUZZLE_FAN_THERMAL(cp1_phy1, &chassis_fan_group0); - }; - - cp1-phy2-thermal { - thermal-sensors = <&cp1_nbaset_phy2>; - PUZZLE_FAN_THERMAL(cp1_phy2, &chassis_fan_group0); - }; - - cp2-phy0-thermal { - thermal-sensors = <&cp2_nbaset_phy0>; - PUZZLE_FAN_THERMAL(cp2_phy0, &chassis_fan_group0); - }; - - cp2-phy1-thermal { - thermal-sensors = <&cp2_nbaset_phy1>; - PUZZLE_FAN_THERMAL(cp2_phy1, &chassis_fan_group0); - }; - - cp2-phy2-thermal { - thermal-sensors = <&cp2_nbaset_phy2>; - PUZZLE_FAN_THERMAL(cp2_phy2, &chassis_fan_group0); - }; - }; - -}; - -&uart0 { - status = "okay"; -}; - -&cp0_uart0 { - status = "okay"; - - puzzle-mcu { - compatible = "iei,wt61p803-puzzle"; - #address-cells = <1>; - #size-cells = <1>; - current-speed = <115200>; - enable-beep; - status = "okay"; - - leds { - compatible = "iei,wt61p803-puzzle-leds"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - led@0 { - reg = <0>; - label = "white:network"; - active-low; - }; - - led@1 { - reg = <1>; - label = "green:cloud"; - active-low; - }; - - led_info: led@2 { - reg = <2>; - label = "orange:info"; - active-low; - }; - - led_power: led@3 { - reg = <3>; - function = LED_FUNCTION_POWER; - color = ; - active-low; - default-state = "on"; - }; - }; - - puzzle_hwmon: hwmon { - compatible = "iei,wt61p803-puzzle-hwmon"; - #address-cells = <1>; - #size-cells = <0>; - #thermal-sensor-cells = <1>; - - chassis_fan_group0: fan-group@0 { - #cooling-cells = <2>; - reg = <0x00>; - cooling-levels = <0 159 195 211 223 241 255>; - }; - }; - }; -}; - -/* on-board eMMC - U9 */ -&ap_sdhci0 { - pinctrl-names = "default"; - bus-width = <8>; - status = "okay"; - mmc-ddr-1_8v; - mmc-hs400-1_8v; -}; - -&cp0_crypto { - status = "okay"; -}; - -&cp0_xmdio { - status = "okay"; - cp0_nbaset_phy0: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - #thermal-sensor-cells = <0>; - }; - cp0_nbaset_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - #thermal-sensor-cells = <0>; - }; - cp0_nbaset_phy2: ethernet-phy@8 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - #thermal-sensor-cells = <0>; - }; -}; - -&cp0_ethernet { - status = "okay"; -}; - -/* SLM-1521-V2, CON9 */ -&cp0_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp0_comphy2 0>; - phy = <&cp0_nbaset_phy0>; -}; - -&cp0_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy4 1>; - phy = <&cp0_nbaset_phy1>; -}; - -&cp0_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp0_comphy1 2>; - phy = <&cp0_nbaset_phy2>; -}; - -&cp0_gpio1 { - status = "okay"; -}; - -&cp0_gpio2 { - status = "okay"; -}; - -&cp0_i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_i2c0_pins>; - status = "okay"; - clock-frequency = <100000>; - rtc@32 { - compatible = "epson,rx8130"; - reg = <0x32>; - wakeup-source; - }; -}; - -&cp0_i2c1 { - clock-frequency = <100000>; -}; - -/* SLM-1521-V2, CON6 */ -&cp0_sata0 { - status = "okay"; - sata-port@1 { - status = "okay"; - phys = <&cp0_comphy0 1>; - }; -}; - -&cp0_pcie2 { - status = "okay"; - num-lanes = <1>; - num-viewport = <8>; - phys = <&cp0_comphy5 2>; -}; - -/* U55 */ -&cp0_spi1 { - pinctrl-names = "default"; - pinctrl-0 = <&cp0_spi0_pins>; - reg = <0x700680 0x50>, /* control */ - <0x2000000 0x1000000>; /* CS0 */ - status = "okay"; - spi-flash@0 { - #address-cells = <0x1>; - #size-cells = <0x1>; - compatible = "jedec,spi-nor"; - reg = <0x0>; - spi-max-frequency = <40000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x1f0000>; - }; - partition@1f0000 { - label = "U-Boot ENV Factory"; - reg = <0x1f0000 0x10000>; - }; - partition@200000 { - label = "Reserved"; - reg = <0x200000 0x1f0000>; - }; - partition@3f0000 { - label = "U-Boot ENV"; - reg = <0x3f0000 0x10000>; - }; - }; - }; -}; - -&cp0_rtc { - status = "disabled"; -}; - -&cp0_syscon0 { - cp0_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp0_i2c0_pins: cp0-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp0_i2c1_pins: cp0-i2c-pins-1 { - marvell,pins = "mpp35", "mpp36"; - marvell,function = "i2c1"; - }; - cp0_ge1_rgmii_pins: cp0-ge-rgmii-pins-0 { - marvell,pins = "mpp0", "mpp1", "mpp2", - "mpp3", "mpp4", "mpp5", - "mpp6", "mpp7", "mpp8", - "mpp9", "mpp10", "mpp11"; - marvell,function = "ge0"; - }; - cp0_ge2_rgmii_pins: cp0-ge-rgmii-pins-1 { - marvell,pins = "mpp44", "mpp45", "mpp46", - "mpp47", "mpp48", "mpp49", - "mpp50", "mpp51", "mpp52", - "mpp53", "mpp54", "mpp55"; - marvell,function = "ge1"; - }; - cp0_spi0_pins: cp0-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - }; -}; - -&cp0_usb3_1 { - status = "okay"; - phys = <&cp0_comphy3 1>; - phy-names = "usb"; -}; - -/* - * Instantiate the first connected CP115 - */ - -#define CP11X_NAME cp1 -#define CP11X_BASE f4000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe2000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f4600000 -#define CP11X_PCIE1_BASE f4620000 -#define CP11X_PCIE2_BASE f4640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp1_crypto { - status = "okay"; -}; - -&cp1_xmdio { - status = "okay"; - cp1_nbaset_phy0: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - #thermal-sensor-cells = <0>; - }; - cp1_nbaset_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - #thermal-sensor-cells = <0>; - }; - cp1_nbaset_phy2: ethernet-phy@8 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - #thermal-sensor-cells = <0>; - }; -}; - -&cp1_ethernet { - status = "okay"; -}; - -/* CON50 */ -&cp1_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp1_comphy2 0>; - phy = <&cp1_nbaset_phy0>; -}; - -&cp1_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy4 1>; - phy = <&cp1_nbaset_phy1>; -}; - -&cp1_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp1_comphy1 2>; - phy = <&cp1_nbaset_phy2>; -}; - -&cp1_gpio1 { - status = "okay"; -}; - -&cp1_gpio2 { - status = "okay"; -}; - -&cp1_i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&cp1_i2c0_pins>; - clock-frequency = <100000>; -}; - -&cp1_rtc { - status = "disabled"; -}; - -&cp1_syscon0 { - cp1_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp1_i2c0_pins: cp1-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - cp1_spi0_pins: cp1-spi-pins-0 { - marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16"; - marvell,function = "spi1"; - }; - cp1_xhci0_vbus_pins: cp1-xhci0-vbus-pins { - marvell,pins = "mpp3"; - marvell,function = "gpio"; - }; - }; -}; - -/* - * Instantiate the second connected CP115 - */ - -#define CP11X_NAME cp2 -#define CP11X_BASE f6000000 -#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000)) -#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000 -#define CP11X_PCIE0_BASE f6600000 -#define CP11X_PCIE1_BASE f6620000 -#define CP11X_PCIE2_BASE f6640000 - -#include "armada-cp115.dtsi" - -#undef CP11X_NAME -#undef CP11X_BASE -#undef CP11X_PCIEx_MEM_BASE -#undef CP11X_PCIEx_MEM_SIZE -#undef CP11X_PCIE0_BASE -#undef CP11X_PCIE1_BASE -#undef CP11X_PCIE2_BASE - -&cp2_crypto { - status = "okay"; -}; - -&cp2_ethernet { - status = "okay"; -}; - -&cp2_xmdio { - status = "okay"; - cp2_nbaset_phy0: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <2>; - #thermal-sensor-cells = <0>; - }; - cp2_nbaset_phy1: ethernet-phy@0 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - #thermal-sensor-cells = <0>; - }; - cp2_nbaset_phy2: ethernet-phy@8 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <8>; - #thermal-sensor-cells = <0>; - }; -}; - -/* SLM-1521-V2, CON9 */ -&cp2_eth0 { - status = "okay"; - phy-mode = "10gbase-kr"; - phys = <&cp2_comphy2 0>; - phy = <&cp2_nbaset_phy0>; -}; - -&cp2_eth1 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp2_comphy4 1>; - phy = <&cp2_nbaset_phy1>; -}; - -&cp2_eth2 { - status = "okay"; - phy-mode = "2500base-x"; - phys = <&cp2_comphy1 2>; - phy = <&cp2_nbaset_phy2>; -}; - -&cp2_gpio1 { - status = "okay"; -}; - -&cp2_gpio2 { - status = "okay"; -}; - -&cp2_i2c0 { - clock-frequency = <100000>; - /* SLM-1521-V2 - U3 */ - i2c-mux@72 { - compatible = "nxp,pca9544"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72>; - cp2_sfpp0_i2c: i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - }; - - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - /* U12 */ - cp2_module_expander1: pca9555@21 { - compatible = "nxp,pca9555"; - pinctrl-names = "default"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x21>; - }; - }; - }; -}; - -&cp2_rtc { - status = "disabled"; -}; - -&cp2_syscon0 { - cp2_pinctrl: pinctrl { - compatible = "marvell,cp115-standalone-pinctrl"; - cp2_i2c0_pins: cp2-i2c-pins-0 { - marvell,pins = "mpp37", "mpp38"; - marvell,function = "i2c0"; - }; - }; -}; diff --git a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi b/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi deleted file mode 100644 index eb8682b2970..00000000000 --- a/target/linux/mvebu/files-6.6/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi +++ /dev/null @@ -1,98 +0,0 @@ -#define PUZZLE_FAN_THERMAL(_cname, _fan) \ - polling-delay-passive = <0>; \ - polling-delay = <1000>; \ - \ - trips { \ - _cname##_active_full: trip-point5 { \ - temperature = <70000>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_very_high: trip-point4 { \ - temperature = <67500>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_high: trip-point3 { \ - temperature = <65000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - _cname##_active_med: trip-point2 { \ - temperature = <62500>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_low: trip-point1 { \ - temperature = <60000>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_min: trip-point0 { \ - temperature = <55000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - }; \ - cooling-maps { \ - map5 { \ - trip = <&_cname##_active_full>; \ - cooling-device = <_fan 6 6>; \ - }; \ - map4 { \ - trip = <&_cname##_active_very_high>; \ - cooling-device = <_fan 5 5>; \ - }; \ - map3 { \ - trip = <&_cname##_active_high>; \ - cooling-device = <_fan 4 4>; \ - }; \ - map2 { \ - trip = <&_cname##_active_med>; \ - cooling-device = <_fan 3 3>; \ - }; \ - map1 { \ - trip = <&_cname##_active_low>; \ - cooling-device = <_fan 2 2>; \ - }; \ - map0 { \ - trip = <&_cname##_active_min>; \ - cooling-device = <_fan 1 1>; \ - }; \ - } - -#define PUZZLE_FAN_CHASSIS_THERMAL(_cname, _fan) \ - polling-delay-passive = <0>; \ - polling-delay = <5000>; \ - \ - trips { \ - _cname##_active_full: trip-point2 { \ - temperature = <70000>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_med: trip-point1 { \ - temperature = <62500>; \ - hysteresis = <3000>; \ - type = "active"; \ - }; \ - _cname##_active_min: trip-point0 { \ - temperature = <55000>; \ - hysteresis = <5000>; \ - type = "active"; \ - }; \ - }; \ - cooling-maps { \ - map2 { \ - trip = <&_cname##_active_full>; \ - cooling-device = <_fan 6 6>; \ - }; \ - map1 { \ - trip = <&_cname##_active_med>; \ - cooling-device = <_fan 3 3>; \ - }; \ - map0 { \ - trip = <&_cname##_active_min>; \ - cooling-device = <_fan 1 1>; \ - }; \ - } diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-370-buffalo-ls220de.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-370-buffalo-ls421de.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-370-c200-v2.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-380-iij-sa-w2.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-30e.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-3xe.dtsi diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-51e.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-52e.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-xxe.dtsi diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-50e-2r.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-fortinet-fwf-51e.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-linksys-venom.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-nas1dual.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts b/target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts rename to target/linux/mvebu/files/arch/arm/boot/dts/marvell/armada-385-wd_cloud-mirror-gen2.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-eDPU.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dtsi diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-rb5009.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-7040-v-80.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/armada-8040-v-81.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9130-clearfog-pro.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts diff --git a/target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi b/target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi similarity index 100% rename from target/linux/mvebu/files-6.12/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi rename to target/linux/mvebu/files/arch/arm64/boot/dts/marvell/puzzle-thermal.dtsi