Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Ensure user portion of SIP URI matches dialplan when using encoded characters.
This commit takes a simliar approach to 288112 and checks the dialplan to
determine the proper action for an incoming contact header as to whether or not
it should be decoded or not. sip_new was blindly always decoding the extension,
which also caused the outgoing contact header to be incorrect as well as failing
to match the encoded extension in the dialplan.
Stefan Schmidt [Fri, 1 Oct 2010 09:42:22 +0000 (09:42 +0000)]
don't iterate through all dialogs to find and delete old subscribes
On every incoming subscribe there is a iteration through all dialogs to find old subscribes and delete them. This is slow and not RFC conform. This was only needed in 1.2 cause a subscribe was not deleted when a dialog was destroyed, after 1.4 a subscribe get removed when its dialog is destroyed.
Since the data being passed to the generator callback is on the stack of the
SMS() application, we must ensure that the generator is stopped before the
application exits.
Allow a manager originate to succeed on forwarded devices.
The timeout to wait for an answer was being set to 0 when a device forwarded to another
extension. We don't always need the timeout set like this, so make it an optional
parameter, and don't use it in this case.
Fixes an issue with the Newchannel AMI event during the Masquerading process.
Fixes an issue with the Newchannel AMI event during the Masquerading process,
where no Newchannel AMI event was generated for the psuedo channel used during
the masquerading process.
If a local channel gets bridged to itself, it becomes orphaned with no devices
left to actually tell it to hang up. This patch modifies local_fixup() to detect
this case and deny it.
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
In chan_iax2.c:schedule_delivery() calls ast_bridged_channel() on an unlocked channel.
Near the beginning of schedule_delivery(), ast_bridged_channel() is called
on iaxs[fr->callno]->owner. However, the channel is not locked, which can
result in ast_bridged_channel() crashing should owner->tech change to a
technology that doesn't implement bridged_channel.
I also fixed the other calls to ast_bridged_channel() in chan_iax2.c since
the owner lock was not held there either.
Converted the existing channel deadlock avoidance to use
iax2_lock_owner(). Using the new function simplified some awkward code.
In the process of fixing the locking on ast_bridged_channel(), I also
found a memory leak in socket_process() for v1.6.2 and v1.8. The local
struct variable ies.vars is not freed on early/abnormal function exits.
(closes issue #17919)
Reported by: rain
Patches:
issue17919_v1.4.patch uploaded by rmudgett (license 664)
issue17919_w_leak_v1.6.2.patch uploaded by rmudgett (license 664)
issue17919_w_leak_v1.8.patch uploaded by rmudgett (license 664)
Try both the encoded and unencoded subscription URI for a match in hints.
When a phone sends an encoded URI for a subscription, the URI is not matched
with the actual hint that is in decoded format. For example, if we have an
extension with a hint that is named: "#5601" or "*5601", the subscription will
work fine if the phone subscribes with an already decoded URI, but when it's
decoded like "%255601" or "%2A5601", Asterisk is unable to match it with the
correct hint.
Fix misvalidation of meetme pins in conjunction with the 'a' MeetMe flag.
When using the 'a' MeetMe flag and having a user and admin pin setup for your
conference, using the user pin would gain you admin priviledges. Also, when no
user pin was set, an admin pin was, the 'a' MeetMe flag wasn't used, and the
user tried to enter a conference then they were still prompted for a pin and
forced to hit #.
Check all 4 combinations of (original/clonechan) * (masq/masqr).
Initially original->masq and clonechan->masqr were only checked.
It's possible with multiple masq's planned - and not yet executed, that
the 'original' chan could already have another masq'd into it - thus original->masqr
would be set, that masqr would lost.
Likewise for the clonechan->masq.
(closes issue #16057;#17363)
Reported by: amorsen;davidw,alecdavis
Patches:
based on bug16057.diff4.txt uploaded by alecdavis (license 585)
Tested by: ramonpeek, davidw, alecdavis
Only drop duplicate answer frames if the channel is bridged.
Back in r3710 ast_read() was modified to drop answer frames on channels that were in the UP state. This modification prevented bridges that were up before the answer from being broken and reestablished by an ANSWER control frame. That change also prevents pickup of channels called from the ast_dial framework from working properly. The ast_dial framework expects to see an ANSWER frame after dialing and the pickup code queues one but ast_read() drops it. This new change only drops ANSWER frames when the channel is bridged, allowing the answer queued by the pickup code to properly pass through ast_read() on to the ast_dial framework.
An outgoing call may not get hung up if a pre-connect incoming ISDN call is disconnected.
If the ISDN link a pre-connect incoming call is using fails or is reset,
the outgoing leg may not hang up or be delayed in hanging up. (Causes:
PRI_CAUSE_NETWORK_OUT_OF_ORDER, PRI_CAUSE_DESTINATION_OUT_OF_ORDER, and
PRI_CAUSE_NORMAL_TEMPORARY_FAILURE.)
Just hang up the call if the incoming call leg hangs up before connecting
for any reason. It makes no sense to send a BUSY or CONGESTION control
frame to the outgoing call leg under these circumstances.
........
Inherit CHANNEL() writes to both sides of a Local channel
Having Local (/n) channels as queue members and setting the language in the
extension with Set(CHANNEL(language)=fr) sets the language on the Local/...,2
channel. Hold time report playbacks happen on the Local/...,1 channel and
therefor do not play in the specified language.
This patch modifies func_channel_write to call the setoption callback and pass
the CHANNEL() write info to the callback. chan_local uses this information to
look up the other side of the channel and apply the same changes to it.
PROBLEM:
In chan_sip, and all the other channel drivers, it is common for
us to hold the tech_pvt lock while we ask the Asterisk core about
an extension and context. Every time we do this the locking
order becomes, (1. tech_pvt lock ---> 2. global context lock). In
chan_sip when a dialog subscribes to a hint, that locking order
is reversed in the extensionstate callback which will occur outside
of the channel_driver's monitor loop. So, on an extension state
update we have (1. global context lock ----> 2. tech_pvt lock).
Typically when we have to do a reversed locking order like this
we'd just do some sort of deadlock avoidance to fix the problem...
That will not work here. There are more locks involved here than
just the context and tech_pvt. Those are the two that are colliding,
but it is impossible to give up the context lock because the global
hints list lock MUST be held as well and we can not give that lock
up during the extensionstate callback traversal... The locking order
for the context and hints are (1. global context lock ----> 2.
hints list lock). Deadlock avoidance is not an option here.
SOLUTION:
The solution this patch implements is to queue the extension state updates
into a list and send the NOTIFY messages out during the do_monitor pvt
traversal. This clears out the problem of having to hold the context
lock before the tech_pvt lock entirely.
While trying to fix this the "right" way, I wandered into dependency hell. Two
hours later, I backed out, and just removed the offending code. ast_inline_api
only goes one level deep and then it breaks. Ouch.
This also fixes a rather grievous calculation error for the offset of
ast_fdset, which was masked on Linux and FreeBSD, because these platforms
check the first 256 FDs regardless of the bitmask setting (due to backwards
compatibility).
........
Fixes an issue with MOH where it doesn't recover cleanly when it can't play a file and would just stop, instead of continuing to find the next playable file in the MOH class.
David Vossel [Wed, 8 Sep 2010 21:47:29 +0000 (21:47 +0000)]
Fixes interoperability problems with session timer behavior in Asterisk.
CHANGES:
1. Never put "timer" in "Require" header. This is not to our benefit
and RFC 4028 section 7.1 even warns against it. It is possible for one
endpoint to perform session-timer refreshes while the other endpoint does
not support them. If in this case the end point performing the refreshing
puts "timer" in the Require field during a refresh, the dialog will
likely get terminated by the other end.
2. Change the behavior of 'session-timer=accept' in sip.conf (which is
the default behavior of Asterisk with no session timer configuration
specified) to only run session-timers as result of an incoming INVITE
request if the INVITE contains an "Session-Expires" header... Asterisk is
currently treating having the "timer" option in the "Supported" header as
a request for session timers by the UAC. I do not agree with this. Session
timers should only be negotiated in "accept" mode when the incoming INVITE
supplies a "Session-Expires" header, otherwise RFC 4028 says we should
treat a request containing no "Session-Expires" header as a session with
no expiration.
Below I have outlined some situations and what Asterisk's behavior is.
The table reflects the behavior changes implemented by this patch.
SITUATIONS:
-Asterisk as UAS
1. Incoming INVITE: NO "Session-Expires"
2. Incoming INVITE: HAS "Session-Expires"
-Asterisk as UAC
3. Outgoing INVITE: NO "Session-Expires". 200 Ok Response HAS "Session-Expires" header
4. Outgoing INVITE: NO "Session-Expires". 200 Ok Response NO "Session-Expires" header
5. Outgoing INVITE: HAS "Session-Expires".
Active - Asterisk will have an active refresh timer regardless if the other endpoint does.
Inactive - Asterisk does not have an active refresh timer regardless if the other endpoint does.
XXXXXXX - Not possible for mode.
______________________________________
|SITUATIONS | 'session-timer' MODES |
|___________|________________________|
| | originate | accept |
|-----------|------------|-----------|
|1. | Active | Inactive |
|2. | Active | Active |
|3. | XXXXXXXX | Active |
|4. | XXXXXXXX | Inactive |
|5. | Active | XXXXXXXX |
--------------------------------------
Handling of the relatedpeer structure associated with a
sip_pvt should be done during the final sip_destruction
function, not in sip_autodestruct.
........
Ensure that all areas that previously used select(2) now use poll(2), with implementations that need poll(2) implemented with select(2) safe against 1024-bit overflows.
This is a followup to the fix for the pthread timer in 1.6.2 and beyond, fixing
a potential crash bug in all supported releases.
(closes issue #17678)
Reported by: russell
Branch: https://origsvn.digium.com/svn/asterisk/team/tilghman/ast_select
Tilghman Lesher [Mon, 30 Aug 2010 22:27:06 +0000 (22:27 +0000)]
Fix 3 coding errors:
1) After we close FD, we should not be trying to write to it.
2) Call _exit(0), not exit(0), to avoid running shutdown routines in a child.
3) Use endian, not processor, detection to ensure bytes are written in the correct order.
Fixed how Asterisk destroys a dialog on channel hangup before invite receives a response.
If an ast_channel with a SIP tech pvt hangs up before the sip dialog gets a response
to its outgoing INVITE, Asterisk used to pretend_ack the INVITE. This is not rfc
compliant and results in confusion at the other endpoint. sip_pretend_ack will ack
and remove all the packets in the retransmit queue. This means that the INVITE will
stop retransmitting, and that any response to that INVITE that comes after the pretend_ack
occurs will be ignored.
Instead of faking any sort of acknowledgement for an outgoing INVITE during an internal
hangup, we should let the protocol stack process the INVITE transaction and terminate
the dialog properly. This is achieved by setting the PENDING_BYE flag. When this flag
is used, once the dialog proceeds to an escapable state the transaction will either be
canceled with a SIP_CANCEL or completed followed immediately by a BYE. Attempting to do
this any other way is incorrect. If the endpoint is not responding to the INVITE request,
the INVITE must continue to be retransmitted until it times out which will result in the
dialog being destroyed.
........
David Vossel [Wed, 25 Aug 2010 22:56:42 +0000 (22:56 +0000)]
Add to and from tags to NOTIFY dialog-info xml body so pickup can occur.
When pedantic mode is used, the dialog-info xml generated during a
ringing event must contain the to and from tag values. Otherwise if
a pickup occurs using INVITE with replaces, Astrisk will not be able
to locate the subscription.
David Vossel [Wed, 25 Aug 2010 15:52:54 +0000 (15:52 +0000)]
Asterisk will not advertise session timers are supported when 'session-timers=refuse' is used.
Asterisk now dynamically builds the "Supported" header depending
on what is enabled/disabled in sip.conf. Session timers used
to always be advertised as being supported even when they were disabled
in the configuration. This caused problems with some end points.
This fix makes sure the ast_channel hangs up correctly when the dialog's PENDING_BYE flag is set.
When the pending bye flag is used, it is possible that the dialog will terminate
and leave the sip_pvt->owner channel up. This is because we never hangup the
ast_channel after sending the SIP_BYE request. When we receive the response for
the SIP_BYE we set need_destroy which we would expect to destroy the dialog on the
next do_monitor loop, but this is not the case. The dialog will only be destroyed
once the owner is hungup even with the need_destroy flag set. This patch sets the
softhangup flag on the ast_channel when a SIP_BYE request is sent as a result of the
pending bye flag.
........
Q931 - Sending PROGRESS after sending ALERTING is a protocol error
The PRI layer in chan_dadhi will check if a PROGRESS message has already
been sent, and not allow sending another (although that is technically
allowed by the Q931 spec), however it does not protect against sending an
ALERTING and then sending a PROGRESS message, which is a violation of the
specification.
Most switches don't seem to care too deeply about this, but some do, and
will disconnect the call when receiving this invalid sequence.
Protocol specification reference: T-REC-Q.931-199805-I page 223, "Figure
A.5/Q.931 -- Overview protocol control (network side) point-point
(sheet 3 of 8)"
(closes issue #17874)
Reported by: nic_bellamy
Patches:
asterisk-1.4-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-1.6.2-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-trunk-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
........
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
projects / thirdparty / asterisk.git / log
