dt-bindings: bluetooth: qcom,wcn7850-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn7850-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties. Re-shuffle few properties to alphabetical order
while moving them and drop redundant enable-gpios description.
This makes the source qualcomm-bluetooth.yaml binding empty, thus drop
it making entire change a variant of file rename.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,wcn6855-bt: Deprecate old supplies
Commit 5f4f954bba12 ("dt-bindings: bluetooth: bring the HW description
closer to reality for wcn6855") changed the binding to new description
with a Power Management Unit (PMU), thus certain power-controller
properties are considered deprecated and are part of that PMUs binding.
Deprecate them to mark clearly that new PMU-based approach is preferred.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,wcn6855-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn6855-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,wcn6750-bt: Deprecate old supplies
Commit cca4fe34979a ("dt-bindings: bluetooth: Utilize PMU abstraction
for WCN6750") changed the binding to new description with a Power
Management Unit (PMU), thus certain power-controller properties are
considered deprecated and are part of that PMUs binding.
Deprecate them to mark clearly that new PMU-based approach is preferred.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,wcn6750-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn6750-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,wcn3990-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn3990-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
This binding is very similar to qcom,wcn3950-bt, however devices have
additional VDD_CH1 supply.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,wcn3950-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,wcn3950-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,qca6390-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,qca6390-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,qca9377-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split qcom,qca9377-bt to separate
bindings, so device schema will be easier to read/maintain and list only
relevant properties.
Existing binding has incomplete and incorrect list of supplies (e.g.
there is no VDD_XO) and Linux driver does not ask for any, thus keep
this state unchanged.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
dt-bindings: bluetooth: qcom,qca2066-bt: Split to separate schema
One big Qualcomm Bluetooth schema is hardly manageable: it lists all
possible properties (19 supplies). Split common part and
qcom,qca2066-bt to separate bindings, so each schema will be easier to
read/maintain and list only relevant properties.
The existing bindings do not mention interrupts, but
am335x-sancloud-bbe-extended-wifi.dts already defines such. This issue
is not being fixed here.
Existing binding also did not mention any supplies (which do exist as
confirmed in datasheet) and Linux driver does not ask for any, thus keep
this state unchanged.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This renames the PHY fields in bt_iso_io_qos to PHYs (plural) since it
represents a bitfield where multiple PHYs can be set and make the same
change also to HCI_OP_LE_SET_CIG_PARAMS since both c_phy and p_phy
fields are bitfields.
This also fixes the assumption that hci_evt_le_cis_established PHYs
fields are compatible with bt_iso_io_qos, they are not, the fields in
hci_evt_le_cis_established represent just a single PHY value so they
need to be converted to bitfield when set in bt_iso_io_qos.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Techie Ernie [Wed, 24 Dec 2025 03:31:29 +0000 (11:31 +0800)]
Bluetooth: btusb: Add USB ID 0489:e112 for Realtek 8851BE
Add USB ID 0489:e112 for the Realtek 8851BE Bluetooth adapter.
Without this entry, the device is not handled correctly by btusb and Bluetooth fails to initialise.
Adding the ID enables proper Realtek initialization for Bluetooth to work on various motherboards using this Bluetooth adapter.
The device identifies as:
Bus 001 Device XXX: ID 0489:e112 Foxconn / Hon Hai Bluetooth Radio
Tested on Realtek 8851BE. Bluetooth works after this change is made.
Signed-off-by: Techie Ernie <techieernie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Historically, WCN685x and QCA2066 shared the same firmware files.
Now, changes are planned for the firmware that will make it incompatible
with QCA2066, so a new firmware name is required for WCN685x.
Test Steps:
- Boot device
- Check the BTFW loading status via dmesg
Sanity pass and Test Log:
QCA Downloading qca/wcnhpbftfw21.tlv
Direct firmware load for qca/wcnhpbftfw21.tlv failed with error -2
QCA Downloading qca/hpbftfw21.tlv
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables client to use setsockopt(BT_PHY) to set the connection
packet type/PHY:
Example setting BT_PHY_BR_1M_1SLOT:
< HCI Command: Change Conne.. (0x01|0x000f) plen 4
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
3-DH5 may not be used
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) ncmd 1
Status: Success (0x00)
> HCI Event: Connection Packet Typ.. (0x1d) plen 5
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
Packet type: 0x331e
2-DH1 may not be used
3-DH1 may not be used
DM1 may be used
DH1 may be used
2-DH3 may not be used
3-DH3 may not be used
2-DH5 may not be used
Example setting BT_PHY_LE_1M_TX and BT_PHY_LE_1M_RX:
< HCI Command: LE Set PHY (0x08|0x0032) plen 7
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
All PHYs preference: 0x00
TX PHYs preference: 0x01
LE 1M
RX PHYs preference: 0x01
LE 1M
PHY options preference: Reserved (0x0000)
> HCI Event: Command Status (0x0f) plen 4
LE Set PHY (0x08|0x0032) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 6
LE PHY Update Complete (0x0c)
Status: Success (0x00)
Handle: 1 Address: 00:AA:01:01:00:00 (Intel Corporation)
TX PHY: LE 1M (0x01)
RX PHY: LE 1M (0x01)
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_sync: Add LE Channel Sounding HCI Command/event structures
1. Implement LE Event Mask to include events required for
LE Channel Sounding
2. Enable Channel Sounding feature bit in the
LE Host Supported Features command
3. Define HCI command and event structures necessary for
LE Channel Sounding functionality
Signed-off-by: Naga Bhavani Akella <naga.akella@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stefan Sørensen [Tue, 16 Dec 2025 09:20:11 +0000 (10:20 +0100)]
Bluetooth: mgmt: Add idle_timeout to configurable system parameters
While the configurable system parameters allow controlling the SNIFF
mode parameters, they do not include the idle_timeout parameter
responsible for enabling SNIFF mode.
Add the idle_timeout parameter to allow controlling the idle timeout
of BR/EDR connections.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stefan Sørensen [Tue, 16 Dec 2025 09:20:10 +0000 (10:20 +0100)]
Bluetooth: hci_conn: Set link_policy on incoming ACL connections
The connection link policy is only set when establishing an outgoing
ACL connection causing connection idle modes not to be available on
incoming connections. Move the setting of the link policy to the
creation of the connection so all ACL connection will use the link
policy set on the HCI device.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stefan Sørensen [Tue, 16 Dec 2025 09:20:09 +0000 (10:20 +0100)]
Bluetooth: hci_conn: use mod_delayed_work for active mode timeout
hci_conn_enter_active_mode() uses queue_delayed_work() with the
intention that the work will run after the given timeout. However,
queue_delayed_work() does nothing if the work is already queued, so
depending on the link policy we may end up putting the connection
into idle mode every hdev->idle_timeout ms.
Use mod_delayed_work() instead so the work is queued if not already
queued, and the timeout is updated otherwise.
Signed-off-by: Stefan Sørensen <ssorensen@roku.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Vaibhav Gupta [Wed, 10 Dec 2025 23:21:09 +0000 (23:21 +0000)]
Bluetooth: hci_bcm4377: Use generic power management
Switch to the generic PCI power management framework and remove legacy
callbacks like .suspend() and .resume(). With the generic framework, the
standard PCI related work like:
- pci_save/restore_state()
- pci_enable/disable_device()
- pci_set_power_state()
is handled by the PCI core and this driver should implement only
hci_bcm4377 specific operations in its respective callback functions.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_conn: Fix using conn->le_{tx,rx}_phy as supported PHYs
conn->le_{tx,rx}_phy is not actually a bitfield as it set by
HCI_EV_LE_PHY_UPDATE_COMPLETE it is actually correspond to the current
PHY in use not what is supported by the controller, so this introduces
different fields (conn->le_{tx,rx}_def_phys) to track what PHYs are
supported by the connection.
Fixes: eab2404ba798 ("Bluetooth: Add BT_PHY socket option") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shuai Zhang [Wed, 3 Dec 2025 03:37:12 +0000 (11:37 +0800)]
Bluetooth: hci_qca: Fix SSR (SubSystem Restart) fail when BT_EN is pulled up by hw
On QCS9075 and QCA8275 platforms, the BT_EN pin is always pulled up by hw
and cannot be controlled by the host. As a result, in case of a firmware
crash, the host cannot trigger a cold reset. Instead, the BT controller
performs a warm restart on its own, without reloading the firmware.
This leads to the controller remaining in IBS_WAKE state, while the host
expects it to be in sleep mode. The mismatch causes HCI reset commands
to time out. Additionally, the driver does not clear internal flags
QCA_SSR_TRIGGERED and QCA_IBS_DISABLED, which blocks the reset sequence.
If the SSR duration exceeds 2 seconds, the host may enter TX sleep mode
due to tx_idle_timeout, further preventing recovery. Also, memcoredump_flag
is not cleared, so only the first SSR generates a coredump.
Tell the driver that the BT controller has undergone a proper restart sequence:
- Clear QCA_SSR_TRIGGERED and QCA_IBS_DISABLED flags after SSR.
- Add a 50ms delay to allow the controller to complete its warm reset.
- Reset tx_idle_timer to prevent the host from entering TX sleep mode.
- Clear memcoredump_flag to allow multiple coredump captures.
Apply these steps only when HCI_QUIRK_NON_PERSISTENT_SETUP is not set,
which indicates that BT_EN is defined in DTS and cannot be toggled.
Refer to the comment in include/net/bluetooth/hci.h for details on
HCI_QUIRK_NON_PERSISTENT_SETUP.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Shuai Zhang <shuai.zhang@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Paolo Abeni [Thu, 29 Jan 2026 13:56:13 +0000 (14:56 +0100)]
Merge tag 'nf-next-26-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter updates for *net-next*:
Patches 1 to 4 add IP6IP6 tunneling acceleration to the flowtable
infrastructure. Patch 5 extends test coverage for this.
From Lorenzo Bianconi.
Patch 6 removes a duplicated helper from xt_time extension, we can
use an existing helper for this, from Jinjie Ruan.
Patch 7 adds an rhashtable to nfnetink_queue to speed up out-of-order
verdict processing. Before this list walk was required due to in-order
design assumption.
netfilter pull request nf-next-26-01-29
* tag 'nf-next-26-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nfnetlink_queue: optimize verdict lookup with hash table
netfilter: xt_time: use is_leap_year() helper
selftests: netfilter: nft_flowtable.sh: Add IP6IP6 flowtable selftest
netfilter: flowtable: Add IP6IP6 tx sw acceleration
netfilter: flowtable: Add IP6IP6 rx sw acceleration
netfilter: Introduce tunnel metadata info in nf_flowtable_ctx struct
netfilter: Add ctx pointer in nf_flow_skb_encap_protocol/nf_flow_ip4_tunnel_proto signature
====================
Scott Mitchell [Fri, 23 Jan 2026 22:09:30 +0000 (14:09 -0800)]
netfilter: nfnetlink_queue: optimize verdict lookup with hash table
The current implementation uses a linear list to find queued packets by
ID when processing verdicts from userspace. With large queue depths and
out-of-order verdicting, this O(n) lookup becomes a significant
bottleneck, causing userspace verdict processing to dominate CPU time.
Replace the linear search with a hash table for O(1) average-case
packet lookup by ID. A global rhashtable spanning all network
namespaces attributes hash bucket memory to kernel but is subject to
fixed upper bound.
Signed-off-by: Scott Mitchell <scott.k.mitch1@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de>
Introduce sw acceleration for tx path of IP6IP6 tunnels relying on the
netfilter flowtable infrastructure.
IP6IP6 tx sw acceleration can be tested running the following scenario
where the traffic is forwarded between two NICs (eth0 and eth1) and an
IP6IP6 tunnel is used to access a remote site (using eth1 as the underlay
device):
$ip addr show
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:1::2/64 scope global nodad
valid_lft forever preferred_lft forever
7: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:11:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:2::1/64 scope global nodad
valid_lft forever preferred_lft forever
8: tun0@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default qlen 1000
link/tunnel6 2001:db8:2::1 peer 2001:db8:2::2 permaddr ce9c:2940:7dcc::
inet6 2002:db8:1::1/64 scope global nodad
valid_lft forever preferred_lft forever
$ip -6 route show
2001:db8:1::/64 dev eth0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev eth1 proto kernel metric 256 pref medium
2002:db8:1::/64 dev tun0 proto kernel metric 256 pref medium
default via 2002:db8:1::2 dev tun0 metric 1024 pref medium
Reproducing the scenario described above using veths I got the following
results:
- TCP stream received from the IPIP tunnel:
- net-next: (baseline) ~93Gbps
- net-next + IP6IP6 flowtbale support: ~98Gbps
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
Introduce sw acceleration for rx path of IP6IP6 tunnels relying on the
netfilter flowtable infrastructure. Subsequent patches will add sw
acceleration for IP6IP6 tunnels tx path.
IP6IP6 rx sw acceleration can be tested running the following scenario
where the traffic is forwarded between two NICs (eth0 and eth1) and an
IP6IP6 tunnel is used to access a remote site (using eth1 as the underlay
device):
$ip addr show
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:00:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:1::2/64 scope global nodad
valid_lft forever preferred_lft forever
7: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 00:11:22:33:11:55 brd ff:ff:ff:ff:ff:ff
inet6 2001:db8:2::1/64 scope global nodad
valid_lft forever preferred_lft forever
8: tun0@NONE: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN group default qlen 1000
link/tunnel6 2001:db8:2::1 peer 2001:db8:2::2 permaddr ce9c:2940:7dcc::
inet6 2002:db8:1::1/64 scope global nodad
valid_lft forever preferred_lft forever
$ip -6 route show
2001:db8:1::/64 dev eth0 proto kernel metric 256 pref medium
2001:db8:2::/64 dev eth1 proto kernel metric 256 pref medium
2002:db8:1::/64 dev tun0 proto kernel metric 256 pref medium
default via 2002:db8:1::2 dev tun0 metric 1024 pref medium
Reproducing the scenario described above using veths I got the following
results:
- TCP stream received from the IPIP tunnel:
- net-next: (baseline) ~ 81Gbps
- net-next + IP6IP6 flowtbale support: ~112Gbps
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
Lorenzo Bianconi [Thu, 22 Jan 2026 17:46:14 +0000 (18:46 +0100)]
netfilter: Introduce tunnel metadata info in nf_flowtable_ctx struct
Add tunnel hdr_size and tunnel proto fields in nf_flowtable_ctx struct
in order to store IP tunnel header size and protocol used during IPIP
and IP6IP6 tunnel sw offloading decapsulation and avoid recomputing them
during tunnel header pop since this is constant for IPv6.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
Lorenzo Bianconi [Thu, 22 Jan 2026 17:46:13 +0000 (18:46 +0100)]
netfilter: Add ctx pointer in nf_flow_skb_encap_protocol/nf_flow_ip4_tunnel_proto signature
Rely on nf_flowtable_ctx struct pointer in nf_flow_ip4_tunnel_proto and
nf_flow_skb_encap_protocol routine signature. This is a preliminary patch
to introduce IP6IP6 flowtable acceleration since nf_flowtable_ctx will
be used to store IP6IP6 tunnel info.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de>
The s2io driver supports Exar (formerly Neterion and S2io) PCI-X 10
Gigabit Ethernet cards. Hardware supporting PCI-X has not been
manufactured in years. On x86, it was quickly replaced by PCIe. While
it stuck around longer on POWER hardware, the last POWER hardware to
support it was POWER7, which is not supported by ppc64le Linux
distributions. The last supported mainstream ppc64 Linux distribution
was RHEL 7; while it is still supported under ELS, ELS is only
available for x86 and IBM Z. It is possible to use many PCI-X cards in
standard PCI slots (which are still available on new motherboards), but
it does not make sense to do so for 10 Gigabit Ethernet because the
maximum bandwidth of standard PCI is only 1067 Mbps. It is therefore
highly unlikely that this driver is still being used. Remove the
driver, and move the former maintainer to the CREDITS file (restoring
credit for the vxge driver, which was removed in commit f05643a0f60b
("eth: remove neterion/vxge").
Daniel Zahka [Tue, 27 Jan 2026 16:30:55 +0000 (08:30 -0800)]
selftests: drv-net: psp: fix test flakes from racy connection close
There is a bug in assoc_sk_only_mismatch() and
assoc_sk_only_mismatch_tx() that creates a race condition which
triggers test flakes in later test cases e.g. data_send_bad_key().
The problem is that the client uses the "conn clr" rpc to setup a data
connection with psp_responder, but never uses a matching "data close"
rpc. This creates a race condition where if the client can queue
another data sock request, like in data_send_bad_key(), before the
server can accept the old connection from the backlog we end up in a
situation where we have two connections in the backlog: one for the
closed connection we have received a FIN for, and one for the new PSP
connection which is expecting to do key exchange.
From there the server pops the closed connection from the backlog, but
the data_send_bad_key() test case in psp.py hangs waiting to perform
key exchange.
The fix is to properly use _conn_close, which fill force the server to
remove the closed connection from the backlog before sending the RPC
ack to the client.
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this as of commit aef30c8d569c0 ("genirq: Warn
about using IRQF_ONESHOT without a threaded handler").
The IRQF_ONESHOT flag was added in commit 0fabe1021f8bc ("MIPS:
DECstation I/O ASIC DMA interrupt classes"). It moved
clear_ioasic_dma_irq() from the driver into the irq-chip.
For EOI interrupts the clear_ioasic_dma_irq() callback is now invoked as
->irq_eoi() which is invoked after the IRQ was handled while the
interrupt is masked due to IRQF_ONESHOT. Without IRQF_ONESHOT it would
be invoked while interrupt is unmasked (but interrupts are disabled).
If it is *required* to invoke EOI-ack while the interrupt is masked (and
not a misunderstanding) due to irq-chip cascading/ hierarchical reasons
then using handle_fasteoi_mask_irq() as flow-handler would be the right
way to do so.
Remove IRQF_ONESHOT to irqflags.
Cc: Andrew Lunn <andrew+netdev@lunn.ch> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Link: https://patch.msgid.link/20260127135334.qUEaYP9G@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tcp_tx_timestamp() behavior after ("tcp: tcp_tx_timestamp()
must look at the rtx queue").
Without the fix, this new test fails like this:
tcp_timestamping_tcp_tx_timestamp_bug.pkt:55: runtime error in recvmsg call: Expected result 0 but got -1 with errno 11 (Resource temporarily unavailable)
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 4168 Comm: syz.4.206 Not tainted syzkaller #0 PREEMPT(voluntary)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Reported-by: syzbot+d24f940f770afda885cf@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/69783ead.050a0220.c9109.0013.GAE@google.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260127043528.514160-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Junjie Cao [Mon, 26 Jan 2026 06:15:32 +0000 (14:15 +0800)]
selftests: ptp: treat unsupported PHC operations as skip
Some PTP hardware clock (PHC) devices may return -EOPNOTSUPP for
operations like settime, adjtime, or adjfreq. This commonly occurs
with timestamp-only PHC implementations that don't support full clock
control.
For background, syzbot previously exposed a crash risk when PTP clock
drivers lacked required callbacks[1]. Subsequent work[2] made callback
presence a registration requirement. As a result, some drivers (like
iwlwifi MVM/MLD[3]) now provide stub callbacks that return -EOPNOTSUPP
for unsupported operations.
When phc_ctl encounters such devices, the "Operation not supported"
error should be treated as a skip (device limitation) rather than a
test failure. This patch:
- Adds [SKIP] output handling in log_test()
- Detects "Operation not supported" from phc_ctl and returns ksft_skip
- Returns ksft_skip if all tests are skipped, preventing false-positive
results when testing timestamp-only PHC implementations
Junjie Cao [Mon, 26 Jan 2026 06:15:31 +0000 (14:15 +0800)]
selftests: ptp: use KSFT_SKIP exit code for skip scenarios
The kselftest framework defines KSFT_SKIP=4 as the standard exit code
for skipped tests. However, phc.sh currently uses a mix of 'exit 0' and
'exit 1' to indicate skip conditions, which can confuse test harnesses
and CI systems.
This patch introduces ksft_skip=4 variable and unifies all skip exit
paths to use 'exit $ksft_skip', consistent with other selftests like
net/lib.sh and net/fib_nexthops.sh.
The int51x1 driver uses the same requests as USB CDC to handle packet
filtering, but provides its own definitions and function to handle it.
The chip datasheet says the requests are CDC compliant. Replace this
unnecessary code with a reference to usbnet_cdc_update_filter.
Also fix the broken datasheet link and remove an empty comment.
Jakub Kicinski [Wed, 28 Jan 2026 01:33:59 +0000 (17:33 -0800)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-26 (ice, idpf)
For ice:
Jake converts ring stats to utilize u64_stats APIs and performs some
cleanups along the way.
Alexander reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts.
For idpf:
YiFei Zhu adds support for BPF kfunc reporting of hardware Rx timestamps.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: export RX hardware timestamping information to XDP
ice: reshuffle and group Rx and Tx queue fields by cachelines
ice: convert all ring stats to u64_stats_t
ice: shorten ring stat names and add accessors
ice: use u64_stats API to access pkts/bytes in dim sample
ice: remove ice_q_stats struct and use struct_group
ice: pass pointer to ice_fetch_u64_stats_per_ring
====================
Breno Leitao [Mon, 26 Jan 2026 10:00:15 +0000 (02:00 -0800)]
ethtool: remove ETHTOOL_GRXRINGS fallback through get_rxnfc
All drivers that need to report the RX ring count now implement the
get_rx_ring_count callback directly. Remove the legacy fallback path
that obtained this information by calling get_rxnfc with ETHTOOL_GRXRINGS.
This simplifies the code and makes get_rx_ring_count the only way
to retrieve the RX ring count.
Note: ethtool_get_rx_ring_count() returns int to allow returning
-EOPNOTSUPP, while the callback returns u32. The implicit conversion
is safe since RX ring counts will not exceed INT_MAX while we are still
alive.
====================
Single MSS length in UDP GSO_PARTIAL
This series addresses an inconsistency in how UDP GSO_PARTIAL handles
the UDP header length field.
Currently, when GSO_PARTIAL segmentation is used, the UDP header length
contains the large MSS size, requiring drivers to manually adjust it
before transmitting. This is inconsistent with how tunnel GSO_PARTIAL
handles outer headers in UDP tunnels, where the length is set to the
single segment size.
This was originally suggested by Alexander Duyck back in 2018:
https://lore.kernel.org/netdev/CAKgT0UcdnUWgr3KQ=RnLKigokkiUuYefmL-ePpDvJOBNpKScFA@mail.gmail.com/
The first patch fixes the core UDP offload code to set the UDP length
field to the single segment size (gso_size + UDP header) instead of the
large MSS size. This provides hardware with a proper template length
value for final segmentation.
The subsequent patches remove the now redundant UDP header length
adjustments from the mlx5e and aquantia drivers, as the core code now
handles this correctly.
I couldn't find any other drivers that support UDP GSO_PARTIAL; idpf
supports UDP segmentation, but it does not use GSO_PARTIAL.
====================
Gal Pressman [Sun, 25 Jan 2026 12:16:47 +0000 (14:16 +0200)]
udp: gso: Use single MSS length in UDP header for GSO_PARTIAL
In GSO_PARTIAL segmentation, set the UDP length field to the single
segment size (gso_size + UDP header) instead of the large MSS size.
This provides hardware with a template length value for final
segmentation, similar to how tunnel GSO_PARTIAL handles outer headers
in UDP tunnels.
This will remove the need to manually adjust the UDP header length in
the drivers, as can be seen in subsequent patches.
This was suggested by Alex in 2018:
https://lore.kernel.org/netdev/CAKgT0UcdnUWgr3KQ=RnLKigokkiUuYefmL-ePpDvJOBNpKScFA@mail.gmail.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260125121649.778086-2-gal@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: stmmac: don't pass ioaddr to fix_soc_reset() method
As the stmmac_priv struct is passed to the fix_soc_reset() method which
has the ioaddr, there is no need to pass ioaddr separately. Pass just
the stmmac_priv struct. Fix up the glues that use it.
net: usb: sr9700: replace magic numbers with register bit macros
The first byte of the Rx frame is a copy of the Rx status register, so
0x40 corresponds to RSR_MF (meaning the frame is multicast). Replace
0x40 with RSR_MF for clarity. (All other bits of the RSR indicate
errors. The fact that the driver ignores these errors will be fixed by
a later patch.)
The first byte of the status URB is a copy of the NSR, so 0x40
corresponds to NSR_LINKST. Replace 0x40 with NSR_LINKST for clarity.
This series updates net/ipv6/addrconf.c to use the regular SHA-1
functions, then removes sha1_init_raw() and sha1_transform().
(These were originally patches 25-26 of the series
https://lore.kernel.org/linux-crypto/20250712232329.818226-1-ebiggers@kernel.org/ )
====================
Eric Biggers [Fri, 23 Jan 2026 05:16:56 +0000 (21:16 -0800)]
lib/crypto: sha1: Remove low-level functions from API
Now that there are no users of the low-level SHA-1 interface, remove it.
Specifically:
- Remove SHA1_DIGEST_WORDS (no longer used)
- Remove sha1_init_raw() (no longer used)
- Rename sha1_transform() to sha1_block_generic() and make it static
- Move SHA1_WORKSPACE_WORDS into lib/crypto/sha1.c
Eric Biggers [Fri, 23 Jan 2026 05:16:55 +0000 (21:16 -0800)]
ipv6: Switch to higher-level SHA-1 functions
There's now a proper SHA-1 API that follows the usual conventions for
hash function APIs: sha1_init(), sha1_update(), sha1_final(), sha1().
The only remaining user of the older low-level SHA-1 API,
sha1_init_raw() and sha1_transform(), is ipv6_generate_stable_address().
I'd like to remove this older API, which is too low-level.
Unfortunately, ipv6_generate_stable_address() does in fact skip the
SHA-1 finalization for some reason. So the values it computes are not
standard SHA-1 values, and it sort of does want the low-level API.
Still, it's still possible to use the higher-level functions sha1_init()
and sha1_update() to get the same result, provided that the resulting
state is used directly, skipping sha1_final().
So, let's do that instead. This will allow removing the low-level API.
net: stmmac: rk: convert rk3328 to use bsp_priv->id
rk3328 contains two GMAC instances - gmac2io and gmac2phy. While the
gmac2io instance may be connected to an external PHY, the gmac2phy
instance is permanently connected via RMII to an on-SoC integrated PHY.
The driver currently tests for the gmac2phy instance by checking
bsp_priv->integrated_phy (determined from the PHY's phy-is-integrated
property) and sometimes that the interface mode is RMII. This works
because the rk3328.dtsi has:
The driver contains a mechanism to look up the MMIO address in a table
to determine bsp_priv->id, which is used for every other Rockchip
device. Switch rk3328 to use this mechanism to determine bsp_priv->id
and use that to select which GRF register is used for configuration,
similarly to how the other Rockchip SoCs handle such differences.
It is not worth having a common rk_phy_power_ctl() when the only
difference is which regulator function is called. Also, passing
true/false is non-descriptive. Split this function, moving the code
appropriately into rk_phy_powerup() and rk_phy_powerdown().
In https://lore.kernel.org/netdev/aDne1Ybuvbk0AwG0@shell.armlinux.org.uk/
I requested that a follow-up patch to change the name of dwmac-rk's
phy_power_on() function, which clashes with the drivers/phy function
of the same name. This can cause confusion when grepping for this
function name, or when reviewing code. Thankfully, stmmac doesn't make
use of drivers/phy which saves this from compile errors.
However, as is the usual case when a request is made as part of a
review, if the review leads to successful application of the patch the
author doesn't bother following up with any such requests, and so the
problem falls back onto the reviewer to address... so here is the
solution.
Rename dwmac-rk's function to rk_phy_power_ctl(), as the function both
powers up and down.
Jijie Shao [Fri, 23 Jan 2026 09:47:56 +0000 (17:47 +0800)]
net: hns3: extend HCLGE_FD_AD_COUNTER_NUM to 8 bits
Currently, HCLGE_FD_AD_COUNTER_NUM has only 7 bits and supports a
maximum of 127 counter_id. However, there are actually scenarios
where the counter_id exceeds 127.
This patch adds an additional bit to HCLGE_FD_AD_QID to ensure
that counter_id greater than 127 are supported.
Jijie Shao [Fri, 23 Jan 2026 09:47:55 +0000 (17:47 +0800)]
net: hns3: extend HCLGE_FD_AD_QID to 11 bits
Currently, HCLGE_FD_AD_QID has only 10 bits and supports a
maximum of 1023 queues. However, there are actually scenarios
where the queue_id exceeds 1023.
This patch adds an additional bit to HCLGE_FD_AD_QID to ensure
that queue_id greater than 1023 are supported.
====================
net: dsa: lantiq: add support for Intel GSW150
The Intel GSW150 Ethernet Switch (aka. Lantiq PEB7084) is the predecessor of
MaxLinear's GSW1xx series of switches. It shares most features, but has a
slightly different port layout and different MII interfaces.
Adding support for this switch to the mxl-gsw1xx driver is quite trivial.
====================
Daniel Golle [Thu, 22 Jan 2026 16:39:30 +0000 (16:39 +0000)]
net: dsa: mxl-gsw1xx: add support for Intel GSW150
Add support for the Intel GSW150 (aka. Lantiq PEB7084) switch IC to
the mxl-gsw1xx driver. This switch comes with 5 Gigabit Ethernet
copper ports (Intel XWAY PHY11G (xRX v1.2 integrated) PHYs) as well as
one GMII/RGMII and one RGMII port.
Daniel Golle [Thu, 22 Jan 2026 16:39:23 +0000 (16:39 +0000)]
net: dsa: mxl-gsw1xx: only setup SerDes PCS if it exists
Older Intel GSW150 chip doesn't have a SGMII/1000Base-X/2500Base-X PCS.
Prepare for supporting Intel GSW150 by skipping PCS reset and
initialization in case no .mac_select_pcs operation is defined.
Daniel Golle [Thu, 22 Jan 2026 16:39:09 +0000 (16:39 +0000)]
net: dsa: lantiq: allow arbitrary MII registers
The Lantiq GSWIP and MaxLinear GSW1xx drivers are currently relying on a
hard-coded mapping of MII ports to their respective MII_CFG and MII_PCDU
registers and only allow applying an offset to the port index.
While this is sufficient for the currently supported hardware, the very
similar Intel GSW150 (aka. Lantiq PEB7084) cannot be described using
this arrangement.
Introduce two arrays to specify the MII_CFG and MII_PCDU registers for
each port, replacing the current bitmap used to safeguard MII ports as
well as the port index offset.
====================
vsock: add namespace support to vhost-vsock and loopback
This series adds namespace support to vhost-vsock and loopback. It does
not add namespaces to any of the other guest transports (virtio-vsock,
hyperv, or vmci).
The current revision supports two modes: local and global. Local
mode is complete isolation of namespaces, while global mode is complete
sharing between namespaces of CIDs (the original behavior).
The mode is set using the parent namespace's
/proc/sys/net/vsock/child_ns_mode and inherited when a new namespace is
created. The mode of the current namespace can be queried by reading
/proc/sys/net/vsock/ns_mode. The mode can not change after the namespace
has been created.
Modes are per-netns. This allows a system to configure namespaces
independently (some may share CIDs, others are completely isolated).
This also supports future possible mixed use cases, where there may be
namespaces in global mode spinning up VMs while there are mixed mode
namespaces that provide services to the VMs, but are not allowed to
allocate from the global CID pool (this mode is not implemented in this
series).
Additionally, added tests for the new namespace features:
tools/testing/selftests/vsock/vmtest.sh
1..25
ok 1 vm_server_host_client
ok 2 vm_client_host_server
ok 3 vm_loopback
ok 4 ns_host_vsock_ns_mode_ok
ok 5 ns_host_vsock_child_ns_mode_ok
ok 6 ns_global_same_cid_fails
ok 7 ns_local_same_cid_ok
ok 8 ns_global_local_same_cid_ok
ok 9 ns_local_global_same_cid_ok
ok 10 ns_diff_global_host_connect_to_global_vm_ok
ok 11 ns_diff_global_host_connect_to_local_vm_fails
ok 12 ns_diff_global_vm_connect_to_global_host_ok
ok 13 ns_diff_global_vm_connect_to_local_host_fails
ok 14 ns_diff_local_host_connect_to_local_vm_fails
ok 15 ns_diff_local_vm_connect_to_local_host_fails
ok 16 ns_diff_global_to_local_loopback_local_fails
ok 17 ns_diff_local_to_global_loopback_fails
ok 18 ns_diff_local_to_local_loopback_fails
ok 19 ns_diff_global_to_global_loopback_ok
ok 20 ns_same_local_loopback_ok
ok 21 ns_same_local_host_connect_to_local_vm_ok
ok 22 ns_same_local_vm_connect_to_local_host_ok
ok 23 ns_delete_vm_ok
ok 24 ns_delete_host_ok
ok 25 ns_delete_both_ok
SUMMARY: PASS=25 SKIP=0 FAIL=0
Bobby Eshleman [Wed, 21 Jan 2026 22:11:52 +0000 (14:11 -0800)]
selftests/vsock: add tests for namespace deletion
Add tests that validate vsock sockets are resilient to deleting
namespaces. The vsock sockets should still function normally.
The function check_ns_delete_doesnt_break_connection() is added to
re-use the step-by-step logic of 1) setup connections, 2) delete ns,
3) check that the connections are still ok.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:51 +0000 (14:11 -0800)]
selftests/vsock: add tests for host <-> vm connectivity with namespaces
Add tests to validate namespace correctness using vsock_test and socat.
The vsock_test tool is used to validate expected success tests, but
socat is used for expected failure tests. socat is used to ensure that
connections are rejected outright instead of failing due to some other
socket behavior (as tested in vsock_test). Additionally, socat is
already required for tunneling TCP traffic from vsock_test. Using only
one of the vsock_test tests like 'test_stream_client_close_client' would
have yielded a similar result, but doing so wouldn't remove the socat
dependency.
Additionally, check for the dependency socat. socat needs special
handling beyond just checking if it is on the path because it must be
compiled with support for both vsock and unix. The function
check_socat() checks that this support exists.
Add more padding to test name printf strings because the tests added in
this patch would otherwise overflow.
Add vm_dmesg_* helpers to encapsulate checking dmesg
for oops and warnings.
Add ability to pass extra args to host-side vsock_test so that tests
that cause false positives may be skipped with arg --skip.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:50 +0000 (14:11 -0800)]
selftests/vsock: add namespace tests for CID collisions
Add tests to verify CID collision rules across different vsock namespace
modes.
1. Two VMs with the same CID cannot start in different global namespaces
(ns_global_same_cid_fails)
2. Two VMs with the same CID can start in different local namespaces
(ns_local_same_cid_ok)
3. VMs with the same CID can coexist when one is in a global namespace
and another is in a local namespace (ns_global_local_same_cid_ok and
ns_local_global_same_cid_ok)
The tests ns_global_local_same_cid_ok and ns_local_global_same_cid_ok
make sure that ordering does not matter.
The tests use a shared helper function namespaces_can_boot_same_cid()
that attempts to start two VMs with identical CIDs in the specified
namespaces and verifies whether VM initialization failed or succeeded.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:49 +0000 (14:11 -0800)]
selftests/vsock: add tests for proc sys vsock ns_mode
Add tests for the /proc/sys/net/vsock/{ns_mode,child_ns_mode}
interfaces. Namely, that they accept/report "global" and "local" strings
and enforce their access policies.
Start a convention of commenting the test name over the test
description. Add test name comments over test descriptions that existed
before this convention.
Add a check_netns() function that checks if the test requires namespaces
and if the current kernel supports namespaces. Skip tests that require
namespaces if the system does not have namespace support.
This patch is the first to add tests that do *not* re-use the same
shared VM. For that reason, it adds a run_ns_tests() function to run
these tests and filter out the shared VM tests.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:48 +0000 (14:11 -0800)]
selftests/vsock: use ss to wait for listeners instead of /proc/net
Replace /proc/net parsing with ss(8) for detecting listening sockets in
wait_for_listener() functions and add support for TCP, VSOCK, and Unix
socket protocols.
The previous implementation parsed /proc/net/tcp using awk to detect
listening sockets, but this approach could not support vsock because
vsock does not export socket information to /proc/net/.
Instead, use ss so that we can detect listeners on tcp, vsock, and unix.
The protocol parameter is now required for all wait_for_listener family
functions (wait_for_listener, vm_wait_for_listener,
host_wait_for_listener) to explicitly specify which socket type to wait
for.
ss is added to the dependency check in check_deps().
These functions are reused by the VM tests to collect and compare dmesg
warnings and oops counts. The future VM-specific tests use them heavily.
This patches relies on vm_ssh() already supporting namespaces.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:46 +0000 (14:11 -0800)]
selftests/vsock: prepare vm management helpers for namespaces
Add namespace support to vm management, ssh helpers, and vsock_test
wrapper functions. This enables running VMs and test helpers in specific
namespaces, which is required for upcoming namespace isolation tests.
The functions still work correctly within the init ns, though the caller
must now pass "init_ns" explicitly.
No functional changes for existing tests. All have been updated to pass
"init_ns" explicitly.
Affected functions (such as vm_start() and vm_ssh()) now wrap their
commands with 'ip netns exec' when executing commands in non-init
namespaces.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:45 +0000 (14:11 -0800)]
selftests/vsock: add namespace helpers to vmtest.sh
Add functions for initializing namespaces with the different vsock NS
modes. Callers can use add_namespaces() and del_namespaces() to create
namespaces global0, global1, local0, and local1.
The add_namespaces() function initializes global0, local0, etc... with
their respective vsock NS mode by toggling child_ns_mode before creating
the namespace.
Remove namespaces upon exiting the program in cleanup(). This is
unlikely to be needed for a healthy run, but it is useful for tests that
are manually killed mid-test.
This patch is in preparation for later namespace tests.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:44 +0000 (14:11 -0800)]
selftests/vsock: increase timeout to 1200
Increase the timeout from 300s to 1200s. On a modern bare metal server
my last run showed the new set of tests taking ~400s. Multiply by an
(arbitrary) factor of three to account for slower/nested runners.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:42 +0000 (14:11 -0800)]
virtio: set skb owner of virtio_transport_reset_no_sock() reply
Associate reply packets with the sending socket. When vsock must reply
with an RST packet and there exists a sending socket (e.g., for
loopback), setting the skb owner to the socket correctly handles
reference counting between the skb and sk (i.e., the sk stays alive
until the skb is freed).
This allows the net namespace to be used for socket lookups for the
duration of the reply skb's lifetime, preventing race conditions between
the namespace lifecycle and vsock socket search using the namespace
pointer.
Bobby Eshleman [Wed, 21 Jan 2026 22:11:41 +0000 (14:11 -0800)]
vsock: add netns to vsock core
Add netns logic to vsock core. Additionally, modify transport hook
prototypes to be used by later transport-specific patches (e.g.,
*_seqpacket_allow()).
Namespaces are supported primarily by changing socket lookup functions
(e.g., vsock_find_connected_socket()) to take into account the socket
namespace and the namespace mode before considering a candidate socket a
"match".
This patch also introduces the sysctl /proc/sys/net/vsock/ns_mode to
report the mode and /proc/sys/net/vsock/child_ns_mode to set the mode
for new namespaces.
Add netns functionality (initialization, passing to transports, procfs,
etc...) to the af_vsock socket layer. Later patches that add netns
support to transports depend on this patch.
This patch changes the allocation of random ports for connectible vsocks
in order to avoid leaking the random port range starting point to other
namespaces.
dgram_allow(), stream_allow(), and seqpacket_allow() callbacks are
modified to take a vsk in order to perform logic on namespace modes. In
future patches, the net will also be used for socket
lookups in these functions.
Gal Pressman [Sun, 25 Jan 2026 10:55:24 +0000 (12:55 +0200)]
selftests: net: fix wrong boolean evaluation in __exit__
The __exit__ method receives ex_type as the exception class when an
exception occurs. The previous code used implicit boolean evaluation:
terminate = self.terminate or (self._exit_wait and ex_type)
^^^^^^^^^^^
In Python, the and operator can be used with non-boolean values, but it
does not always return a boolean result.
This is probably not what we want, because 'self._exit_wait and ex_type'
could return the actual ex_type value (the exception class) rather than
a boolean True when an exception occurs.
Use explicit `ex_type is not None` check to properly evaluate whether
an exception occurred, returning a boolean result.
Javen Xu [Sat, 24 Jan 2026 21:27:24 +0000 (22:27 +0100)]
r8169: add support for extended chip version id and RTL9151AS
The bits in register TxConfig used for chip identification aren't
sufficient for the number of upcoming chip versions. Therefore a register
is added with extended chip version information, for compatibility
purposes it's called TX_CONFIG_V2. First chip to use the extended chip
identification is RTL9151AS.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
[hkallweit1@gmail.com: add support for extended XID where XID is printed] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/a3525b74-a1aa-43f6-8413-56615f6fa795@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: usb: replace unnecessary get_link functions with usbnet_get_link
usbnet_get_link calls mii_link_ok if the device has a MII defined in
its usbnet struct and no check_connect function defined there. This is
true of these drivers, so their custom get_link functions which call
mii_link_ok are useless. Remove them in favor of usbnet_get_link.
net: usb: smsc95xx: use phy_do_ioctl_running function
The smsc95xx_ioctl function behaves identically to the
phy_do_ioctl_running function. Remove it and use the
phy_do_ioctl_running function directly instead.
Justin Chen [Thu, 22 Jan 2026 19:49:49 +0000 (11:49 -0800)]
net: bcmasp: streamline early exit in probe
Streamline the bcmasp_probe early exit. As support for other
functionality is added(i.e. ptp), it is easier to keep track of early
exit cleanup when it is all in one place.
Justin Chen [Thu, 22 Jan 2026 19:49:48 +0000 (11:49 -0800)]
net: bcmasp: clean up some legacy logic
Removed wol_irq check. This was needed for brcm,asp-v2.0, which was
removed in previous commits.
Removed bcmasp_intf_ops. These function pointers were added to make
it easier to implement pseudo channels. These channels were removed
in newer versions of the hardware and were never implemented.
projects / thirdparty / kernel / linux.git / log
