The reason is that imap is not properly initialized after memory
allocation. It will cause the snprintf() function to write uninitialized
data into linebuf within hex_dump_to_buffer().
Fix this by using kzalloc instead of kmalloc to clear its content at the
beginning in diMount().
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Reported-by: syzbot+df6cdcb35904203d2b6d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/67b5d07e.050a0220.14d86d.00e6.GAE@google.com/ Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We noticed the kworker in page_pool_release_retry() was waken
up repeatedly and infinitely in production because of the
buggy driver causing the inflight less than 0 and warning
us in page_pool_inflight()[1].
Since the inflight value goes negative, it means we should
not expect the whole page_pool to get back to work normally.
This patch mitigates the adverse effect by not rescheduling
the kworker when detecting the inflight negative in
page_pool_release_retry().
[1]
[Mon Feb 10 20:36:11 2025] ------------[ cut here ]------------
[Mon Feb 10 20:36:11 2025] Negative(-51446) inflight packet-pages
...
[Mon Feb 10 20:36:11 2025] Call Trace:
[Mon Feb 10 20:36:11 2025] page_pool_release_retry+0x23/0x70
[Mon Feb 10 20:36:11 2025] process_one_work+0x1b1/0x370
[Mon Feb 10 20:36:11 2025] worker_thread+0x37/0x3a0
[Mon Feb 10 20:36:11 2025] kthread+0x11a/0x140
[Mon Feb 10 20:36:11 2025] ? process_one_work+0x370/0x370
[Mon Feb 10 20:36:11 2025] ? __kthread_cancel_work+0x40/0x40
[Mon Feb 10 20:36:11 2025] ret_from_fork+0x35/0x40
[Mon Feb 10 20:36:11 2025] ---[ end trace ebffe800f33e7e34 ]---
Note: before this patch, the above calltrace would flood the
dmesg due to repeated reschedule of release_dw kworker.
Currently, ath12k_dp_mon_srng_process uses ath12k_hal_srng_src_get_next_entry
to fetch the next entry from the destination ring. This is incorrect because
ath12k_hal_srng_src_get_next_entry is intended for source rings, not destination
rings. This leads to invalid entry fetches, causing potential data corruption or
crashes due to accessing incorrect memory locations. This happens because the
source ring and destination ring have different handling mechanisms and using
the wrong function results in incorrect pointer arithmetic and ring management.
To fix this issue, replace the call to ath12k_hal_srng_src_get_next_entry with
ath12k_hal_srng_dst_get_next_entry in ath12k_dp_mon_srng_process. This ensures
that the correct function is used for fetching entries from the destination
ring, preventing invalid memory accesses.
Fix quirk for CME master keyboards so it not only handles
sysex but also song position pointer, MIDI timing clock, start
and stop messages, and active sensing. All of these can be
output by the CME UF series master keyboards.
Tested with a CME UF6 in a desktop Linux environment as
well as on the Zynthian Raspberry Pi based platform.
In certain DW MMC implementations (such as in some Exynos7870
controllers), 64-bit read/write is not allowed from a 64-bit FIFO.
Add a quirk which facilitates accessing the 64-bit FIFO registers in two
32-bit halves.
Lenovo IdeaPad Z570 with NVIDIA GeForce Ge 540M doesn't have sound on
the discrete GPU. The HDA controller in DGPU is disabled by BIOS, but
then reenabled by quirk_nvidia_hda(). The probe fails and ends up with
the "GPU sound probed, but not operational" error.
Add this laptop to DMI-based denylist to prevent probe early. DMI is
used, because the audio device has zero subsystem IDs, and this entry
would be too much, blocking all 540M chips:
PCI_DEVICE_SUB(0x10de, 0x0bea, 0x0000, 0x0000)
Also, this laptop comes in a variety of modifications with different
NVIDIA GPUs, so the DMI check will cover them all.
quirk_nvidia_hda() forcefully enables HDA controller on all NVIDIA GPUs,
because some buggy BIOSes leave it disabled. However, some dual-GPU
laptops do not have a functional HDA controller in DGPU, and BIOS
disables it on purpose. After quirk_nvidia_hda() reenables this dummy
HDA controller, attempting to probe it fails at azx_first_init(), which
is too late to cancel the probe, as it happens in azx_probe_continue().
The sna_hda_intel driver calls azx_free() and stops the chip, however,
it stays probed, and from the runtime PM point of view, the device
remains active (it was set as active by the PCI subsystem on probe). It
prevents vga_switcheroo from turning off the DGPU, because
pci_create_device_link() syncs power management for video and audio
devices.
Affected devices should be added to driver_denylist to prevent them from
probing early. This patch helps identify such devices by printing a
warning, and also forces the device to the suspended state to allow
vga_switcheroo turn off DGPU.
This function triggered a null pointer dereference if used to search for
a report that isn't implemented on the device. This happened both for
optional and required reports alike.
The same logic was applied to pidff_find_special_field and although
pidff_init_fields should return an error earlier if one of the required
reports is missing, future modifications could change this logic and
resurface this possible null pointer dereference again.
Some devices only support SINE periodic effect although they advertise
support for all PERIODIC effect in their HID descriptor. Some just do
nothing when trying to play such an effect (upload goes fine), some express
undefined behavior like turning to one side.
This quirk forces all the periodic effects to be uploaded as SINE. This is
acceptable as all these effects are similar in nature and are mostly used as
rumble. SINE is the most popular with others seldom used (especially SAW_UP
and SAW_DOWN).
Fixes periodic effects for PXN and LITE STAR wheels
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Extend pidff compatibility, usable button range, manage pidff quirks and
set improved fuzz/flat default for high precision devices. Possibility
of fixing device descriptors in the future if such needs arises.
As many of PID devices are quite similar and not dependent on
custom drivers, this one can handle all of PID devices which
need special care.
Numerous sim racing/sim flight bases report a lot of buttons
in excess of 100. Moza Racing exposes 128 of them and thus
the need to extend the available range.
All the included devices were tested and confirmed working
with the help of the sim racing community.
Changes in v6:
- Support "split" devices with a separate "input device" for buttons
- Fixed comment styling
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Most steering wheels simply ignore DIRECTION field, but some try to be
compliant with the PID standard and use it in force calculations. Games
often ignore setting this field properly and/or there can be issues with
dinput8 -> wine -> SDL -> Linux API translation, and this value can be
incorrect. This can lead to partial/complete loss of Force Feedback or
even unexpected force reversal.
Sadly, this quirk can't be detected automatically without sending out
effects that would move an axis.
This fixes FFB on Moza Racing devices and others where effect direction
is not simply ignored.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This lays out a way to provide an initial set of quirks to enable before
device initialization takes place. GPL symbol export needed for the
possibility of building HID drivers which use this function as modules.
Adding a wrapper function to ensure compatibility with the old behavior
of hid_pidff_init.
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With this quirk, a PID device isn't required to have a strict
logical_minimum of 1 for the the PID_DEVICE_CONTROL usage page.
Some devices come with weird values in their device descriptors and
this quirk enables their initialization even if the logical minimum
of the DEVICE_CONTROL page is not 1.
Fixes initialization of VRS Direct Force Pro
Changes in v6:
- Change quirk name to better reflect it's intention
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some devices with only one axis are missing PARAMETER_BLOCK_OFFSET field
for conditional effects. They can only have one axis, so we're limiting
the max_axis when setting the report for those effects.
Automatic detection ensures compatibility even if such device won't be
explicitly defined in the kernel.
Fixes initialization of VRS DirectForce PRO and possibly other devices.
Changes in v6:
- Fixed NULL pointer dereference. When PBO is missing, make sure not
to set it anyway
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A lot of devices do not include this field, and it's seldom used in force
feedback implementations. I tested about three dozen applications and
none of them make use of the delay.
This fixes initialization of a lot of PID wheels like Cammus, VRS, FFBeast
This change has no effect on fully compliant devices
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Envelope struct is always initialized, but the envelope itself is
optional as described in USB PID Device class definition 1.0.
5.1.1.1 Type Specific Block Offsets
...
4) Effects that do not use Condition Blocks use 1 Parameter Block and
an *optional* Envelope Block.
Sending out "empty" envelope breaks force feedback on some devices with
games that use SINE effect + offset to emulate constant force effect, as
well as generally breaking Constant/Periodic effects. One of the affected
brands is Moza Racing.
This change prevents the envelope from being sent if it contains all
0 values while keeping the old behavior of only sending it, if it differs
from the old one.
Changes in v6:
- Simplify the checks to make them clearer
- Fix possible null pointer dereference while calling
pidff_needs_set_envelope
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Software uses 0 as de-facto infinite lenght on Linux FF apis (SDL),
Linux doesn't actually define anythi as of now, while USB PID defines
NULL (0xffff). Most PID devices do not expect a 0-length effect and
can't interpret it as infinite. This change fixes Force Feedback for
most PID compliant devices.
As most games depend on updating the values of already playing infinite
effects, this is crucial to ensure they will actually work.
Previously, users had to rely on third-party software to do this conversion
and make their PID devices usable.
Co-developed-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Makarenko Oleg <oleg@makarenk.ooo> Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com> Reviewed-by: Michał Kopeć <michal@nozomi.space> Reviewed-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Paul Dino Jones <paul@spacefreak18.xyz> Tested-by: Cristóferson Bueno <cbueno81@gmail.com> Tested-by: Pablo Cisneros <patchkez@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to pending percpu improvements in -next, GCC9 and GCC10 are
crashing during the build with:
lib/zstd/compress/huf_compress.c:1033:1: internal compiler error: Segmentation fault
1033 | {
| ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-9/README.Bugs> for instructions.
The DYNAMIC_BMI2 feature is a known-challenging feature of
the ZSTD library, with an existing GCC quirk turning it off
for GCC versions below 4.8.
Increase the DYNAMIC_BMI2 version cutoff to GCC 11.0 - GCC 10.5
is the last version known to crash.
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to and correctly identify the char array as "not a C
string" and thereby eliminate the warning.
Currently armpmu_add() tries to handle a newly-allocated counter having
a stale associated event, but this should not be possible, and if this
were to happen the current mitigation is insufficient and potentially
expensive. It would be better to warn if we encounter the impossible
case.
Calls to pmu::add() and pmu::del() are serialized by the core perf code,
and armpmu_del() clears the relevant slot in pmu_hw_events::events[]
before clearing the bit in pmu_hw_events::used_mask such that the
counter can be reallocated. Thus when armpmu_add() allocates a counter
index from pmu_hw_events::used_mask, it should not be possible to observe
a stale even in pmu_hw_events::events[] unless either
pmu_hw_events::used_mask or pmu_hw_events::events[] have been corrupted.
If this were to happen, we'd end up with two events with the same
event->hw.idx, which would clash with each other during reprogramming,
deletion, etc, and produce bogus results. Add a WARN_ON_ONCE() for this
case so that we can detect if this ever occurs in practice.
That possiblity aside, there's no need to call arm_pmu::disable(event)
for the new event. The PMU reset code initialises the counter in a
disabled state, and armpmu_del() will disable the counter before it can
be reused. Remove the redundant disable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Tested-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250218-arm-brbe-v19-v20-2-4e9922fc2e8e@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When running in a virtual machine, we might see the original hardware CPU
vendor string (i.e. "AuthenticAMD"), but a model and family ID set by the
hypervisor. In case we run on AMD hardware and the hypervisor sets a model
ID < 0x14, the LAHF cpu feature is eliminated from the the list of CPU
capabilities present to circumvent a bug with some BIOSes in conjunction with
AMD K8 processors.
Parsing the flags list from /proc/cpuinfo seems to be happening mostly in
bash scripts and prebuilt Docker containers, as it does not need to have
additionals tools present – even though more reliable ways like using "kcpuid",
which calls the CPUID instruction instead of parsing a list, should be preferred.
Scripts, that use /proc/cpuinfo to determine if the current CPU is
"compliant" with defined microarchitecture levels like x86-64-v2 will falsely
claim the CPU is incapable of modern CPU instructions when "lahf_lm" is missing
in that flags list.
This can prevent some docker containers from starting or build scripts to create
unoptimized binaries.
Admittably, this is more a small inconvenience than a severe bug in the kernel
and the shoddy scripts that rely on parsing /proc/cpuinfo
should be fixed instead.
This patch adds an additional check to see if we're running inside a
virtual machine (X86_FEATURE_HYPERVISOR is present), which, to my
understanding, can't be present on a real K8 processor as it was introduced
only with the later/other Athlon64 models.
Example output with the "lahf_lm" flag missing in the flags list
(should be shown between "hypervisor" and "abm"):
$ cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 6
model name : Common KVM processor
stepping : 1
microcode : 0x1000065
cpu MHz : 2599.998
cache size : 512 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx rdtscp
lm rep_good nopl cpuid extd_apicid tsc_known_freq pni
pclmulqdq ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt
tsc_deadline_timer aes xsave avx f16c hypervisor abm
3dnowprefetch vmmcall bmi1 avx2 bmi2 xsaveopt
... while kcpuid shows the feature to be present in the CPU:
# kcpuid -d | grep lahf
lahf_lm - LAHF/SAHF available in 64-bit mode
[ mingo: Updated the comment a bit, incorporated Boris's review feedback. ]
The first GDT descriptor is reserved as 'NULL descriptor'. As bits 0
and 1 of a segment selector, i.e., the RPL bits, are NOT used to index
GDT, selector values 0~3 all point to the NULL descriptor, thus values
0, 1, 2 and 3 are all valid NULL selector values.
When a NULL selector value is to be loaded into a segment register,
reload_segments() sets its RPL bits. Later IRET zeros ES, FS, GS, and
DS segment registers if any of them is found to have any nonzero NULL
selector value. The two operations offset each other to actually effect
a nop.
Besides, zeroing of RPL in NULL selector values is an information leak
in pre-FRED systems as userspace can spot any interrupt/exception by
loading a nonzero NULL selector, and waiting for it to become zero.
But there is nothing software can do to prevent it before FRED.
ERETU, the only legit instruction to return to userspace from kernel
under FRED, by design does NOT zero any segment register to avoid this
problem behavior.
As such, leave NULL selector values 0~3 unchanged and close the leak.
Do the same on 32-bit kernel as well.
Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20241126184529.1607334-1-xin@zytor.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The bit pattern of _PAGE_DIRTY set and _PAGE_RW clear is used to mark
shadow stacks. This is currently checked for in mk_pte() but not
pfn_pte(). If we add the check to pfn_pte(), it catches vfree()
calling set_direct_map_invalid_noflush() which calls
__change_page_attr() which loads the old protection bits from the
PTE, clears the specified bits and uses pfn_pte() to construct the
new PTE.
We should, therefore, for kernel mappings, clear the _PAGE_DIRTY bit
consistently whenever we clear _PAGE_RW. I opted to do it in the
callers in case we want to use __change_page_attr() to create shadow
stacks inside the kernel at some point in the future. Arguably, we
might also want to clear _PAGE_ACCESSED here.
Only ever manipulate non-swappable kernel mappings, so maintaining
the DIRTY:1|RW:0 special pattern for shadow stacks and DIRTY:0
pattern for non-shadow-stack entries can be maintained consistently
and doesn't result in the unintended clearing of a live dirty bit
that could corrupt (destroy) dirty bit information for user mappings.
Loosen the permission check on forced umount to allow users holding
CAP_SYS_ADMIN privileges in namespaces that are privileged with respect
to the userns that originally mounted the filesystem.
... except when the table is known to be only used by one thread.
A file pointer can get installed at any moment despite the ->file_lock
being held since the following: 8a81252b774b53e6 ("fs/file.c: don't acquire files->file_lock in fd_install()")
Accesses subject to such a race can in principle suffer load tearing.
While here redo the comment in dup_fd -- it only covered a race against
files showing up, still assuming fd_install() takes the lock.
Currently, mtk_iommu calls during probe iommu_device_register before
the hw_list from driver data is initialized. Since iommu probing issue
fix, it leads to NULL pointer dereference in mtk_iommu_device_group when
hw_list is accessed with list_first_entry (not null safe).
So, change the call order to ensure iommu_device_register is called
after the driver data are initialized.
Fixes: 9e3a2a643653 ("iommu/mediatek: Adapt sharing and non-sharing pgtable case") Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path") Reviewed-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Chen-Yu Tsai <wenst@chromium.org> # MT8183 Juniper, MT8186 Tentacruel Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Link: https://lore.kernel.org/r/20250403-fix-mtk-iommu-error-v2-1-fe8b18f8b0a8@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The value of 'ff' is irrelevant, any address will be matched
as long as the other octets are the same.
This is because of too-early register clobbering:
ymm7 is reloaded with new packet data (pkt[9]) but it still holds data
of an earlier load that wasn't processed yet.
The existing tests in nft_concat_range.sh selftests do exercise this code
path, but do not trigger incorrect matching due to the network prefix
limitation.
Ensure we have enough data in linear buffer from skb before accessing
initial bytes. This prevents potential out-of-bounds accesses
when processing short packets.
When ppp_sync_txmung receives an incoming package with an empty
payload:
(remote) gef➤ p *(struct pppoe_hdr *) (skb->head + skb->network_header)
$18 = {
type = 0x1,
ver = 0x1,
code = 0x0,
sid = 0x2,
length = 0x0,
tag = 0xffff8880371cdb96
}
from the skb struct (trimmed)
tail = 0x16,
end = 0x140,
head = 0xffff88803346f400 "4",
data = 0xffff88803346f416 ":\377",
truesize = 0x380,
len = 0x0,
data_len = 0x0,
mac_len = 0xe,
hdr_len = 0x0,
A nexthop is only chosen when the calculated multipath hash falls in the
nexthop's hash region (i.e., the hash is smaller than the nexthop's hash
threshold) and when the nexthop is assigned a non-negative score by
rt6_score_route().
Commit 4d0ab3a6885e ("ipv6: Start path selection from the first
nexthop") introduced an unintentional difference between the first
nexthop and the rest when the score is negative.
When the first nexthop matches, but has a negative score, the code will
currently evaluate subsequent nexthops until one is found with a
non-negative score. On the other hand, when a different nexthop matches,
but has a negative score, the code will fallback to the nexthop with
which the selection started ('match').
Align the behavior across all nexthops and fallback to 'match' when the
first nexthop matches, but has a negative score.
Fixes: 3d709f69a3e7 ("ipv6: Use hash-threshold instead of modulo-N") Fixes: 4d0ab3a6885e ("ipv6: Start path selection from the first nexthop") Reported-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Closes: https://lore.kernel.org/netdev/67efef607bc41_1ddca82948c@willemb.c.googlers.com.notmuch/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250408084316.243559-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not sufficient to directly validate the limit on the data that
the user passes as it can be updated based on how the other parameters
are changed.
Move the check at the end of the configuration update process to also
catch scenarios where the limit is indirectly updated, for example
with the following configurations:
Many configuration parameters have influence on others (e.g. divisor
-> flows -> limit, depth -> limit) and so it is difficult to correctly
do all of the validation before applying the configuration. And if a
validation error is detected late it is difficult to roll back a
partially applied configuration.
To avoid these issues use a temporary work area to update and validate
the configuration and only then apply the configuration to the
internal state.
Signed-off-by: Octavian Purdila <tavip@google.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: b3bf8f63e617 ("net_sched: sch_sfq: move the limit validation") Signed-off-by: Sasha Levin <sashal@kernel.org>
The newly element to be added to the list is the first argument of
list_add_tail. This fix is missing dcfad4ab4d67 ("nvmet-fcloop: swap
the list_add_tail arguments").
Fixes: 437c0b824dbd ("nvme-fcloop: add target to host LS request support") Signed-off-by: Daniel Wagner <wagi@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
HuC delayed loading fence, introduced with commit 27536e03271da
("drm/i915/huc: track delayed HuC load with a fence"), is registered with
object tracker early on driver probe but unregistered only from driver
remove, which is not called on early probe errors. Since its memory is
allocated under devres, then released anyway, it may happen to be
allocated again to the fence and reused on future driver probes, resulting
in kernel warnings that taint the kernel:
The function pdc20621_prog_dimm0() calls the function pdc20621_i2c_read()
but does not handle the error if the read fails. This could lead to
process with invalid data. A proper implementation can be found in
/source/drivers/ata/sata_sx4.c, pdc20621_prog_dimm_global(). As mentioned
in its commit: bb44e154e25125bef31fa956785e90fccd24610b, the variable spd0
might be used uninitialized when pdc20621_i2c_read() fails.
Add error handling to pdc20621_i2c_read(). If a read operation fails,
an error message is logged via dev_err(), and return a negative error
code.
Add error handling to pdc20621_prog_dimm0() in pdc20621_dimm_init(), and
return a negative error code if pdc20621_prog_dimm0() fails.
Fixes: 4447d3515616 ("libata: convert the remaining SATA drivers to new init model") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page)
but it would still proceed to use the NULL pointer and then crash.
This is similar to commit 001ba0902046
("net: fec: handle page_pool_dev_alloc_pages error").
This is found by our static analysis tool KNighter.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI") Reviewed-by: Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20250407184952.2111299-1-chenyuan0y@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The
drm_test_connector_helper_tv_get_modes_check() test never does however,
which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 1e4a91db109f ("drm/probe-helper: Provide a TV get_modes helper") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-7-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_modes_analog_tv tests never
do however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 4fcd238560ee ("drm/modes: Add a function to generate analog display modes") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-5-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drm_analog_tv_mode() and its variants return a drm_display_mode that
needs to be destroyed later one. The drm_test_cmdline_tv_options() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: e691c9992ae1 ("drm/modes: Introduce the tv_mode property as a command-line option") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-4-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As Maxime suggested, add a new helper
drm_kunit_display_mode_from_cea_vic(), it can replace the direct call
of drm_display_mode_from_cea_vic(), and it will help solving
the `mode` memory leaks.
Acked-by: Maxime Ripard <mripard@kernel.org> Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241030023504.530425-2-ruanjinjie@huawei.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
Stable-dep-of: 70f29ca3117a ("drm/tests: cmdline: Fix drm_display_mode memory leak") Signed-off-by: Sasha Levin <sashal@kernel.org>
We're going to need a full-blown, functional, KMS device to test more
components of the atomic modesetting infrastructure.
Let's add a new helper to create a dumb, mocked, CRTC. By default it
will create a CRTC relying only on the default helpers, but drivers are
free to deviate from that.
The mock device we were creating was missing any of the driver-wide
helpers. That was fine before since we weren't testing the atomic state
path, but we're going to start, so let's use the default
implementations.
drm_mode_find_dmt() returns a drm_display_mode that needs to be
destroyed later one. The drm_test_pick_cmdline_res_1920_1080_60() test
never does however, which leads to a memory leak.
Let's make sure it's freed.
Reported-by: Philipp Stanner <phasta@mailbox.org> Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/ Fixes: 8fc0380f6ba7 ("drm/client: Add some tests for drm_connector_pick_cmdline_mode()") Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20250408-drm-kunit-drm-display-mode-memleak-v1-2-996305a2e75a@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There's a consistent pattern where the .cleanup_data() callback is
called when .prepare_data() fails, when it should really be called to
clean after a successful .prepare_data() as per the documentation.
Rewrite the error-handling paths to make sure we don't cleanup
un-prepared data.
Fixes: c781ff12a2f3 ("ethtool: Allow network drivers to dump arbitrary EEPROM data") Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250407130511.75621-1-maxime.chevallier@bootlin.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tfilter_notify() and tfilter_del_notify() functions assume that
NLMSG_GOODSIZE is always enough to dump the filter chain. This is not
always the case, which can lead to silent notify failures (because the
return code of tfilter_notify() is not always checked). In particular,
this can lead to NLM_F_ECHO not being honoured even though an action
succeeds, which forces userspace to create workarounds[0].
Fix this by increasing the message size if dumping the filter chain into
the allocated skb fails. Use the size of the incoming skb as a size hint
if set, so we can start at a larger value when appropriate.
To trigger this, run the following commands:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 32); do echo action pedit munge ip dport set 22; done)
Before this fix, tc just returns:
Not a filter(cmd 2)
After the fix, we get the correct echo:
added filter dev veth0 parent 1: protocol all pref 49152 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 terminal flowid not_in_hw
match 00000000/00000000 at 0
action order 1: pedit action pass keys 1
index 1 ref 1 bind 1
key #0 at 20: val 00000016 mask ffff0000
[repeated 32 times]
As of today tc-filter/chain events are unconditionally built and sent to
RTNLGRP_TC. As with the introduction of rtnl_notify_needed we can check
before-hand if they are really needed. This will help to alleviate
system pressure when filters are concurrently added without the rtnl
lock as in tc-flower.
Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231208192847.714940-8-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc6272 ("tc: Ensure we have enough buffer space when sending filter netlink notifications") Signed-off-by: Sasha Levin <sashal@kernel.org>
Building on the rtnl_has_listeners helper, add the rtnl_notify_needed
helper to check if we can bail out early in the notification routines.
Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231208192847.714940-3-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc6272 ("tc: Ensure we have enough buffer space when sending filter netlink notifications") Signed-off-by: Sasha Levin <sashal@kernel.org>
As of today, rtnl code creates a new skb and unconditionally fills and
broadcasts it to the relevant group. For most operations this is okay
and doesn't waste resources in general.
When operations are done without the rtnl_lock, as in tc-flower, such
skb allocation, message fill and no-op broadcasting can happen in all
cores of the system, which contributes to system pressure and wastes
precious cpu cycles when no one will receive the built message.
Introduce this helper so rtnetlink operations can simply check if someone
is listening and then proceed if necessary.
Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20231208192847.714940-2-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 369609fc6272 ("tc: Ensure we have enough buffer space when sending filter netlink notifications") Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.
The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:
After making all ->qlen_notify() callbacks idempotent, now it is safe to
remove the check of qlen!=0 from both fq_codel_dequeue() and
codel_qdisc_dequeue().
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Fixes: 4b549a2ef4be ("fq_codel: Fair Queue Codel AQM") Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250403211636.166257-1-xiyou.wangcong@gmail.com Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case the backlog transmit queue for system-importance messages is overloaded,
tipc_link_xmit() returns -ENOBUFS but the skb list is not purged. This leads to
memory leak and failure when a skb is allocated.
This commit fixes this issue by purging the skb list before tipc_link_xmit()
returns.
Fixes: 365ad353c256 ("tipc: reduce risk of user starvation during link congestion") Signed-off-by: Tung Nguyen <tung.quang.nguyen@est.tech> Link: https://patch.msgid.link/20250403092431.514063-1-tung.quang.nguyen@est.tech Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The !CONFIG_IA32_EMULATION version of xen_entry_SYSCALL_compat() ends
with a SYSCALL instruction which is classified by objtool as
INSN_CONTEXT_SWITCH.
Unlike validate_branch(), validate_unret() doesn't consider
INSN_CONTEXT_SWITCH in a non-function to be a dead end, so it keeps
going past the end of xen_entry_SYSCALL_compat(), resulting in the
following warning:
vmlinux.o: warning: objtool: xen_reschedule_interrupt+0x2a: RET before UNTRAIN
Fix that by adding INSN_CONTEXT_SWITCH handling to validate_unret() to
match what validate_branch() is already doing.
devm_ioremap() returns NULL on error. Currently, pxa_ata_probe() does
not check for this case, which can result in a NULL pointer dereference.
Add NULL check after devm_ioremap() to prevent this issue.
Fixes: 2dc6c6f15da9 ("[ARM] pata_pxa: DMA-capable PATA driver") Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Forcewake timeout issue has been observed on Gen 12.0 and above.
To address this, disable Render Power-Gating (RPG) during live self-tests
for these generations. The temporary workaround 'drm/i915/mtl: do not
enable render power-gating on MTL' disables RPG globally, which is
unnecessary since the issues were only seen during self-tests.
v2: take runtime pm wakeref
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9413 Fixes: 25e7976db86b ("drm/i915/mtl: do not enable render power-gating on MTL") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Signed-off-by: Sk Anirban <sk.anirban@intel.com> Reviewed-by: Karthik Poosa <karthik.poosa@intel.com> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250310152821.2931678-1-sk.anirban@intel.com
(cherry picked from commit 0a4ae87706c6d15d14648e428c3a76351f823e48) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On DG2, submissions to VCS engines tied to a gem context are blocked
until the HuC is loaded. Since some selftests do use a gem context,
wait for the HuC load to complete before running the tests to avoid
contamination.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10564 Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240410201505.894594-1-daniele.ceraolospurio@intel.com
Stable-dep-of: 9d3d9776bd3b ("drm/i915: Disable RPG during live selftest") Signed-off-by: Sasha Levin <sashal@kernel.org>
An update was made to up the module ref count when a synthetic event is
registered for both trace and perf events. But if perf is not configured
in, the perf enums used will cause the kernel to fail to build.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Douglas Raillard <douglas.raillard@arm.com> Link: https://lore.kernel.org/20250323152151.528b5ced@batman.local.home Fixes: 21581dd4e7ff ("tracing: Ensure module defining synth event cannot be unloaded while tracing") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202503232230.TeREVy8R-lkp@intel.com/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NFSD sends CB_RECALL_ANY to clients when the server is low on
memory or that client has a large number of delegations outstanding.
We've seen cases where NFSD attempts to send CB_RECALL_ANY requests
to disconnected clients, and gets confused. These calls never go
anywhere if a backchannel transport to the target client isn't
available. Before the server can send any backchannel operation, the
client has to connect first and then do a BIND_CONN_TO_SESSION.
This patch doesn't address the root cause of the confusion, but
there's no need to queue up these optional operations if they can't
go anywhere.
Fixes: 44df6f439a17 ("NFSD: add delegation reaper to react to low memory condition") Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before calling nfsd4_run_cb to queue dl_recall to the callback_wq, we
increment the reference count of dl_stid.
We expect that after the corresponding work_struct is processed, the
reference count of dl_stid will be decremented through the callback
function nfsd4_cb_recall_release.
However, if the call to nfsd4_run_cb fails, the incremented reference
count of dl_stid will not be decremented correspondingly, leading to the
following nfs4_stid leak:
unreferenced object 0xffff88812067b578 (size 344):
comm "nfsd", pid 2761, jiffies 4295044002 (age 5541.241s)
hex dump (first 32 bytes):
01 00 00 00 6b 6b 6b 6b b8 02 c0 e2 81 88 ff ff ....kkkk........
00 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 ad 4e ad de .kkkkkkk.....N..
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfsd4_process_open1+0x34/0x300
nfsd4_open+0x2d1/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
unreferenced object 0xffff8881499f4d28 (size 368):
comm "nfsd", pid 2761, jiffies 4295044005 (age 5541.239s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 30 4d 9f 49 81 88 ff ff ........0M.I....
30 4d 9f 49 81 88 ff ff 20 00 00 00 01 00 00 00 0M.I.... .......
backtrace:
kmem_cache_alloc+0x4b9/0x700
nfs4_alloc_stid+0x29/0x210
alloc_init_deleg+0x92/0x2e0
nfs4_set_delegation+0x284/0xc00
nfs4_open_delegation+0x216/0x3f0
nfsd4_process_open2+0x2b3/0xee0
nfsd4_open+0x770/0x9d0
nfsd4_proc_compound+0x7a2/0xe30
nfsd_dispatch+0x241/0x3e0
svc_process_common+0x5d3/0xcc0
svc_process+0x2a3/0x320
nfsd+0x180/0x2e0
kthread+0x199/0x1d0
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
Fix it by checking the result of nfsd4_run_cb and call nfs4_put_stid if
fail to queue dl_recall.
Cc: stable@vger.kernel.org Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzkaller has reported a general protection fault at function
ir_raw_event_store_with_filter(). This crash is caused by a NULL pointer
dereference of dev->raw pointer, even though it is checked for NULL in
the same function, which means there is a race condition. It occurs due
to the incorrect order of actions in the streamzap_disconnect() function:
rc_unregister_device() is called before usb_kill_urb(). The dev->raw
pointer is freed and set to NULL in rc_unregister_device(), and only
after that usb_kill_urb() waits for in-progress requests to finish.
If rc_unregister_device() is called while streamzap_callback() handler is
not finished, this can lead to accessing freed resources. Thus
rc_unregister_device() should be called after usb_kill_urb().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 8e9e60640067 ("V4L/DVB: staging/lirc: port lirc_streamzap to ir-core") Cc: stable@vger.kernel.org Reported-by: syzbot+34008406ee9a31b13c73@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=34008406ee9a31b13c73 Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
check_unsafe_exec() sets fs->in_exec under cred_guard_mutex, then execve()
paths clear fs->in_exec lockless. This is fine if exec succeeds, but if it
fails we have the following race:
During the "size_check" label in ea_get(), the code checks if the extended
attribute list (xattr) size matches ea_size. If not, it logs
"ea_get: invalid extended attribute" and calls print_hex_dump().
Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds
INT_MAX (2,147,483,647). Then ea_size is clamped:
int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr));
Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper
limit is treated as an int, causing an overflow above 2^31 - 1. This leads
"size" to wrap around and become negative (-184549328).
The "size" is then passed to print_hex_dump() (called "len" in
print_hex_dump()), it is passed as type size_t (an unsigned
type), this is then stored inside a variable called
"int remaining", which is then assigned to "int linelen" which
is then passed to hex_dump_to_buffer(). In print_hex_dump()
the for loop, iterates through 0 to len-1, where len is 18446744073525002176, calling hex_dump_to_buffer()
on each iteration:
for (i = 0; i < len; i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
linebuf, sizeof(linebuf), ascii);
...
}
The expected stopping condition (i < len) is effectively broken
since len is corrupted and very large. This eventually leads to
the "ptr+i" being passed to hex_dump_to_buffer() to get closer
to the end of the actual bounds of "ptr", eventually an out of
bounds access is done in hex_dump_to_buffer() in the following
for loop:
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This fixes an analogus bug that was fixed in xfs in commit 4b8d867ca6e2 ("xfs: don't over-report free space or inodes in
statvfs") where statfs can report misleading / incorrect information
where project quota is enabled, and the free space is less than the
remaining quota.
This commit will resolve a test failure in generic/762 which tests for
this bug.
do_alignment_t32_to_handler() only fixes up alignment faults for
specific instructions; it returns NULL otherwise (e.g. LDREX). When
that's the case, signal to the caller that it needs to proceed with the
regular alignment fault handling (i.e. SIGBUS). Without this patch, the
kernel panics:
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations") Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The printk format for synth event uses "%.*s" to print string fields,
but then only passes the pointer part as var arg.
Replace %.*s with %s as the C string is guaranteed to be null-terminated.
The output in print fmt should never have been updated as __get_str()
handles the string limit because it can access the length of the string in
the string meta data that is saved in the ring buffer.
Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 8db4d6bfbbf92 ("tracing: Change synthetic event string format to limit printed length") Link: https://lore.kernel.org/20250325165202.541088-1-douglas.raillard@arm.com Signed-off-by: Douglas Raillard <douglas.raillard@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed.
Cc: stable@vger.kernel.org Signed-off-by: Norbert Szetei <norbert@doyensec.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a race condition between session setup and
ksmbd_sessions_deregister. The session can be freed before the connection
is added to channel list of session.
This patch check reference count of session before freeing it.
Cc: stable@vger.kernel.org Reported-by: Sean Heelan <seanheelan@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In multichannel mode, UAF issue can occur in session_deregister
when the second channel sets up a session through the connection of
the first channel. session that is freed through the global session
table can be accessed again through ->sessions of connection.
We have received reports about cards can become corrupt related to the
aggressive PM support. Let's make a partial revert of the change that
enabled the feature.
Reported-by: David Owens <daowens01@gmail.com> Reported-by: Romain Naour <romain.naour@smile.fr> Reported-by: Robert Nelson <robertcnelson@gmail.com> Tested-by: Robert Nelson <robertcnelson@gmail.com> Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20250312121712.1168007-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the MMC_CAP_NEED_RSP_BUSY capability for the sdhci-pxav3 host to
prevent conversion of R1B responses to R1. Without this, the eMMC card
in the samsung,coreprimevelte smartphone using the Marvell PXA1908 SoC
with this mmc host doesn't probe with the ETIMEDOUT error originating in
__mmc_poll_for_busy.
Note that the other issues reported for this phone and host, namely
floods of "Tuning failed, falling back to fixed sampling clock" dmesg
messages for the eMMC and unstable SDIO are not mitigated by this
change.
Add err_free_host label to properly pair mmc_alloc_host() with
mmc_free_host() in GPIO error paths. The allocated host memory was
leaked when GPIO lookups failed.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250318140226.19650-1-linmq006@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like the ASUS Vivobook X1504VAP and Vivobook X1704VAP, the ASUS Vivobook 14
X1404VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which
the kernel overrides to EdgeHigh breaking the keyboard.
$ sudo dmidecode
[…]
System Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: ASUS Vivobook 14 X1404VAP_X1404VA
[…]
$ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
Add the X1404VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Anton Shyndin <mrcold.il@gmail.com> Link: https://patch.msgid.link/20250318160903.77107-1-pmenzel@molgen.mpg.de Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzkaller has reported a warning in to_nfit_bus_uuid(): "only secondary
bus families can be translated". This warning is emited if the argument
is equal to NVDIMM_BUS_FAMILY_NFIT == 0. Function acpi_nfit_ctl() first
verifies that a user-provided value call_pkg->nd_family of type u64 is
not equal to 0. Then the value is converted to int, and only after that
is compared to NVDIMM_BUS_FAMILY_MAX. This can lead to passing an invalid
argument to acpi_nfit_ctl(), if call_pkg->nd_family is non-zero, while
the lower 32 bits are zero.
Furthermore, it is best to return EINVAL immediately upon seeing the
invalid user input. The WARNING is insufficient to prevent further
undefined behavior based on other invalid user input.
All checks of the input value should be applied to the original variable
call_pkg->nd_family.
On the following path, flush_tlb_range() can be used for zapping normal
PMD entries (PMD entries that point to page tables) together with the PTE
entries in the pointed-to page table:
The arm64 version of flush_tlb_range() has a comment describing that it can
be used for page table removal, and does not use any last-level
invalidation optimizations. Fix the X86 version by making it behave the
same way.
Currently, X86 only uses this information for the following two purposes,
which I think means the issue doesn't have much impact:
- In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be
IPI'd to avoid issues with speculative page table walks.
- In Hyper-V TLB paravirtualization, again for lazy TLB stuff.
The patch "x86/mm: only invalidate final translations with INVLPGB" which
is currently under review (see
<https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>)
would probably be making the impact of this a lot worse.
TSC could be reset in deep ACPI sleep states, even with invariant TSC.
That's the reason we have sched_clock() save/restore functions, to deal
with this situation. But what happens is that such functions are guarded
with a check for the stability of sched_clock - if not considered stable,
the save/restore routines aren't executed.
On top of that, we have a clear comment in native_sched_clock() saying
that *even* with TSC unstable, we continue using TSC for sched_clock due
to its speed.
In other words, if we have a situation of TSC getting detected as unstable,
it marks the sched_clock as unstable as well, so subsequent S3 sleep cycles
could bring bogus sched_clock values due to the lack of the save/restore
mechanism, causing warnings like this:
[22.954918] ------------[ cut here ]------------
[22.954923] Delta way too big! 18446743750843854390 ts=18446744072977390405 before=322133536015 after=322133536015 write stamp=18446744072977390405
[22.954923] If you just came from a suspend/resume,
[22.954923] please switch to the trace global clock:
[22.954923] echo global > /sys/kernel/tracing/trace_clock
[22.954923] or add trace_clock=global to the kernel command line
[22.954937] WARNING: CPU: 2 PID: 5728 at kernel/trace/ring_buffer.c:2890 rb_add_timestamp+0x193/0x1c0
Notice that the above was reproduced even with "trace_clock=global".
The fix for that is to _always_ save/restore the sched_clock on suspend
cycle _if TSC is used_ as sched_clock - only if we fallback to jiffies
the sched_clock_stable() check becomes relevant to save/restore the
sched_clock.
Debugged-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250215210314.351480-1-gpiccoli@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'device_name' array doesn't exist out of the
'overflow_allocation_test' function scope. However, it is being used as
a driver name when calling 'kunit_driver_create' from
'kunit_device_register'. It produces the kernel panic with KASAN
enabled.
Since this variable is used in one place only, remove it and pass the
device name into kunit_device_register directly as an ascii string.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Reviewed-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20240815000431.401869-1-ivan.orlov0322@gmail.com Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
