Gao Xiang [Thu, 8 Jan 2026 02:38:31 +0000 (10:38 +0800)]
erofs: don't bother with s_stack_depth increasing for now
Previously, commit d53cd891f0e4 ("erofs: limit the level of fs stacking
for file-backed mounts") bumped `s_stack_depth` by one to avoid kernel
stack overflow when stacking an unlimited number of EROFS on top of
each other.
This fix breaks composefs mounts, which need EROFS+ovl^2 sometimes
(and such setups are already used in production for quite a long time).
One way to fix this regression is to bump FILESYSTEM_MAX_STACK_DEPTH
from 2 to 3, but proving that this is safe in general is a high bar.
After a long discussion on GitHub issues [1] about possible solutions,
one conclusion is that there is no need to support nesting file-backed
EROFS mounts on stacked filesystems, because there is always the option
to use loopback devices as a fallback.
As a quick fix for the composefs regression for this cycle, instead of
bumping `s_stack_depth` for file backed EROFS mounts, we disallow
nesting file-backed EROFS over EROFS and over filesystems with
`s_stack_depth` > 0.
This works for all known file-backed mount use cases (composefs,
containerd, and Android APEX for some Android vendors), and the fix is
self-contained.
Essentially, we are allowing one extra unaccounted fs stacking level of
EROFS below stacking filesystems, but EROFS can only be used in the read
path (i.e. overlayfs lower layers), which typically has much lower stack
usage than the write path.
We can consider increasing FILESYSTEM_MAX_STACK_DEPTH later, after more
stack usage analysis or using alternative approaches, such as splitting
the `s_stack_depth` limitation according to different combinations of
stacking.
Linus Torvalds [Sun, 28 Dec 2025 18:21:47 +0000 (10:21 -0800)]
Merge tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes, and bunch of reverts for 6.19-rc3.
Included in here are:
- reverts of some typec ucsi driver changes that had a lot of
regression reports after -rc1. Let's just revert it all for now and
it will come back in a way that is better tested.
- other typec bugfixes
- usb-storage quirk fixups
- dwc3 driver fix
- other minor USB fixes for reported problems.
All of these have passed 0-day testing and individual testing"
* tag 'usb-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
Revert "usb: typec: ucsi: Update UCSI structure to have message in and message out fields"
Revert "usb: typec: ucsi: Add support for message out data structure"
Revert "usb: typec: ucsi: Enable debugfs for message_out data structure"
Revert "usb: typec: ucsi: Add support for SET_PDOS command"
Revert "usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common"
Revert "usb: typec: ucsi: Get connector status after enable notifications"
usb: ohci-nxp: clean up probe error labels
usb: gadget: lpc32xx_udc: clean up probe error labels
usb: ohci-nxp: fix device leak on probe failure
usb: phy: isp1301: fix non-OF device reference imbalance
usb: gadget: lpc32xx_udc: fix clock imbalance in error path
usb: typec: ucsi: Get connector status after enable notifications
usb: usb-storage: Maintain minimal modifications to the bcdDevice range.
usb: dwc3: of-simple: fix clock resource leak in dwc3_of_simple_probe
usb: typec: ucsi: Fix null pointer dereference in ucsi_sync_control_common
USB: lpc32xx_udc: Fix error handling in probe
usb: typec: altmodes/displayport: Drop the device reference in dp_altmode_probe()
usb: phy: fsl-usb: Fix use-after-free in delayed work during device removal
usb: renesas_usbhs: Fix a resource leak in usbhs_pipe_malloc()
usb: typec: ucsi: huawei-gaokin: add DRM dependency
...
Linus Torvalds [Sun, 28 Dec 2025 18:14:49 +0000 (10:14 -0800)]
Merge tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for some reported issues.
Included in here are:
- serial sysfs fwnode fix that was much reported
- sh-sci driver fix
- serial device init bugfix
- 8250 bugfix
- xilinx_uartps bugfix
All of these have passed 0-day testing and individual testing"
* tag 'tty-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: xilinx_uartps: fix rs485 delay_rts_after_send
serial: sh-sci: Check that the DMA cookie is valid
serial: core: Fix serial device initialization
serial: 8250: longson: Fix NULL vs IS_ERR() bug in probe
serial: core: Restore sysfs fwnode information
Linus Torvalds [Sun, 28 Dec 2025 18:11:18 +0000 (10:11 -0800)]
Merge tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A fix for PCI driver for Texas Instruments PCILyx series.
The driver had a bug where it allocated a DMA-coherent buffer of 16 KB
but released it using PAGE_SIZE. This disproportion was reported in
2020, but the fix was never merged. It is finally resolved"
* tag 'firewire-fixes-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: nosy: Fix dma_free_coherent() size
Linus Torvalds [Sun, 28 Dec 2025 17:44:26 +0000 (09:44 -0800)]
Merge tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
Linus Torvalds [Sun, 28 Dec 2025 17:40:09 +0000 (09:40 -0800)]
Merge tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Fix for kexec warning due to SMT disable or partial SMT enabled
- Handle font bitmap pointer with reloc_offset to fix boot crash
- Fix to enable cpuidle state for Power11
- Couple of misc fixes
Thanks to Aboorva Devarajan, Aditya Bodkhe, Cedar Maxwell, Christian
Zigotzky, Christophe Leroy, Christophe Leroy (CS GROUP), Finn Thain,
Gopi Krishna Menon, Guenter Roeck, Jan Stancek, Joe Lawrence, Josh
Poimboeuf, Justin M. Forbes, Madadi Vineeth Reddy, Naveen N Rao (AMD),
Nysal Jan K.A., Sachin P Bappalige, Samir M, Sourabh Jain, Srikar
Dronamraju, and Stan Johnson
* tag 'powerpc-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
powerpc/powernv: Enable cpuidle state detection for POWER11
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
powerpc/tools: drop `-o pipefail` in gcc check scripts
selftests/powerpc/pmu/: Add check_extended_reg_test to .gitignore
powerpc/kexec: Enable SMT before waking offline CPUs
Linus Torvalds [Sat, 27 Dec 2025 16:37:26 +0000 (08:37 -0800)]
Merge tag 'spi-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"We've got more fixes here for the Cadence QSPI controller, this time
fixing some issues that come up when working with slower flashes on
some platforms plus a general race condition.
We also add support for the Allwinner A523, this is just some new
compatibles"
* tag 'spi-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is slow
spi: cadence-quadspi: Prevent lost complete() call during indirect read
spi: sun6i: Support A523's SPI controllers
spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers
Linus Torvalds [Sat, 27 Dec 2025 16:04:39 +0000 (08:04 -0800)]
Merge tag 'regulator-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes from Thomas, making the UAPI headers more robustly
correct and ensuring they are covered by checkpatch, and one from
Andreas fixing an update for a change to the DT bindings that I missed
was requested during bindings review in the newly added fp9931 driver"
* tag 'regulator-fix-v6.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fp9931: fix regulator node pointer
regulator: Add UAPI headers to MAINTAINERS
regulator: uapi: Use UAPI integer type
Linus Torvalds [Fri, 26 Dec 2025 21:41:02 +0000 (13:41 -0800)]
Merge tag 'driver-core-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Introduce DMA Rust helpers to avoid build errors when !CONFIG_HAS_DMA
- Remove unnecessary (and hence incorrect) endian conversion in the
Rust PCI driver sample code
- Fix memory leak in the unwind path of debugfs_change_name()
- Support non-const struct software_node pointers in
SOFTWARE_NODE_REFERENCE(), after introducing _Generic()
- Avoid NULL pointer dereference in the unwind path of
simple_xattrs_free()
* tag 'driver-core-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
fs/kernfs: null-ptr deref in simple_xattrs_free()
software node: Also support referencing non-constant software nodes
debugfs: Fix memleak in debugfs_change_name().
samples: rust: fix endianness issue in rust_driver_pci
rust: dma: add helpers for architectures without CONFIG_HAS_DMA
Linus Torvalds [Fri, 26 Dec 2025 21:37:11 +0000 (13:37 -0800)]
Merge tag 'efi-fixes-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"A couple of fixes for EFI regressions introduced this cycle:
- Make EDID handling in the EFI stub mixed mode safe
- Ensure that efi_mm.user_ns has a sane value - this is needed now
that EFI runtime calls are preemptible on arm64"
* tag 'efi-fixes-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
kthread: Warn if mm_struct lacks user_ns in kthread_use_mm()
arm64: efi: Fix NULL pointer dereference by initializing user_ns
efi/libstub: gop: Fix EDID support in mixed-mode
Linus Torvalds [Fri, 26 Dec 2025 19:44:35 +0000 (11:44 -0800)]
Merge tag 'block-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix for a signedness issue introduced in this kernel release for rnbd
- Fix up user copy references for ublk when the server exits
* tag 'block-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: rnbd-clt: Fix signedness bug in init_dev()
ublk: clean up user copy references on ublk server exit
Linus Torvalds [Fri, 26 Dec 2025 19:34:38 +0000 (11:34 -0800)]
Merge tag 'io_uring-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix for a bug that can cause a leak of the filename with
IORING_OP_OPENAT, if direct descriptors are asked for and O_CLOEXEC
has been set in the request flags"
* tag 'io_uring-6.19-20251226' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix filename leak in __io_openat_prep()
__io_openat_prep() allocates a struct filename using getname(). However,
for the condition of the file being installed in the fixed file table as
well as having O_CLOEXEC flag set, the function returns early. At that
point, the request doesn't have REQ_F_NEED_CLEANUP flag set. Due to this,
the memory for the newly allocated struct filename is not cleaned up,
causing a memory leak.
Fix this by setting the REQ_F_NEED_CLEANUP for the request just after the
successful getname() call, so that when the request is torn down, the
filename will be cleaned up, along with other resources needing cleanup.
Breno Leitao [Tue, 23 Dec 2025 10:55:44 +0000 (02:55 -0800)]
kthread: Warn if mm_struct lacks user_ns in kthread_use_mm()
Add a WARN_ON_ONCE() check to detect mm_struct instances that are
missing user_ns initialization when passed to kthread_use_mm().
When a kthread adopts an mm via kthread_use_mm(), LSM hooks and
capability checks may access current->mm->user_ns for credential
validation. If user_ns is NULL, this leads to a NULL pointer
dereference crash.
This was observed with efi_mm on arm64, where commit a5baf582f4c0
("arm64/efi: Call EFI runtime services without disabling preemption")
introduced kthread_use_mm(&efi_mm), but efi_mm lacked user_ns
initialization, causing crashes during /proc access.
Adding this warning helps catch similar bugs early during development
rather than waiting for hard-to-debug NULL pointer crashes in
production.
I've bissected the problem to commit a5baf582f4c0 ("arm64/efi: Call EFI
runtime services without disabling preemption").
>From my analyzes, the crash occurs because efi_mm lacks a user_ns field
initialization. This was previously harmless, but commit a5baf582f4c0
("arm64/efi: Call EFI runtime services without disabling preemption")
changed the EFI runtime call path to use kthread_use_mm(&efi_mm), which
temporarily adopts efi_mm as the current mm for the calling kthread.
When a thread has an active mm, LSM hooks like cap_capable() expect
mm->user_ns to be valid for credential checks. With efi_mm.user_ns being
NULL, capability checks during possible /proc access dereference the
NULL pointer and crash.
Fix by initializing efi_mm.user_ns to &init_user_ns.
Hans de Goede [Tue, 23 Dec 2025 10:10:46 +0000 (11:10 +0100)]
efi/libstub: gop: Fix EDID support in mixed-mode
The efi_edid_discovered_protocol and efi_edid_active_protocol have mixed
mode fields. So all their attributes should be accessed through
the efi_table_attr() helper.
Doing so fixes the upper 32 bits of the 64 bit gop_edid pointer getting
set to random values (followed by a crash at boot) when booting a x86_64
kernel on a machine with 32 bit UEFI like the Asus T100TA.
Fixes: 17029cdd8f9d ("efi/libstub: gop: Add support for reading EDID") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Linus Torvalds [Wed, 24 Dec 2025 17:23:04 +0000 (09:23 -0800)]
Merge tag 'nfsd-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes that arrived just a bit late for the 6.19 merge
window.
Regression fixes:
- Mark variable __maybe_unused to avoid W=1 build break
Stable fixes:
- NFSv4 file creation neglects setting ACL
- Clear TIME_DELEG in the suppattr_exclcreat bitmap
- Clear SECLABEL in the suppattr_exclcreat bitmap
- Fix memory leak in nfsd_create_serv error paths
- Bound check rq_pages index in inline path
- Return 0 on success from svc_rdma_copy_inline_range
- Use rc_pageoff for memcpy byte offset
- Avoid NULL deref on zero length gss_token in gss_read_proxy_verf"
* tag 'nfsd-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: NFSv4 file creation neglects setting ACL
NFSD: Clear TIME_DELEG in the suppattr_exclcreat bitmap
NFSD: Clear SECLABEL in the suppattr_exclcreat bitmap
nfsd: fix memory leak in nfsd_create_serv error paths
nfsd: Mark variable __maybe_unused to avoid W=1 build break
svcrdma: bound check rq_pages index in inline path
svcrdma: return 0 on success from svc_rdma_copy_inline_range
svcrdma: use rc_pageoff for memcpy byte offset
SUNRPC: svcauth_gss: avoid NULL deref on zero length gss_token in gss_read_proxy_verf
Linus Torvalds [Wed, 24 Dec 2025 17:15:30 +0000 (09:15 -0800)]
Merge tag 'erofs-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fix from Gao Xiang:
"Junbeom reported that synchronous reads could hit unintended EIOs
under memory pressure due to incorrect error propagation in
z_erofs_decompress_queue(), where earlier physical clusters in the
same decompression queue may be served for another readahead.
This addresses the issue by decompressing each physical cluster
independently as long as disk I/Os succeed, rather than being impacted
by the error status of previous physical clusters in the same queue.
Summary:
- Fix unexpected EIOs under memory pressure caused by recent
incorrect error propagation logic"
* tag 'erofs-for-6.19-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix unexpected EIO under memory pressure
Zilin Guan [Wed, 24 Dec 2025 15:21:42 +0000 (15:21 +0000)]
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case.
Fixes: 0f0e357902957 ("cifs: during remount, make sure passwords are in sync") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn> Signed-off-by: Steve French <stfrench@microsoft.com>
Evan Lambert [Wed, 24 Dec 2025 12:44:22 +0000 (12:44 +0000)]
drm/msm: Replace unsafe snprintf usage with scnprintf
The refill_buf function uses snprintf to append to a fixed-size buffer.
snprintf returns the length that would have been written, which can
exceed the remaining buffer size. If this happens, ptr advances beyond
the buffer and rem becomes negative. In the 2nd iteration, rem is
treated as a large unsigned integer, causing snprintf to write oob.
While this behavior is technically mitigated by num_perfcntrs being
locked at 5, it's still unsafe if num_perfcntrs were ever to change/a
second source was added.
vhost/vsock: improve RCU read sections around vhost_vsock_get()
vhost_vsock_get() uses hash_for_each_possible_rcu() to find the
`vhost_vsock` associated with the `guest_cid`. hash_for_each_possible_rcu()
should only be called within an RCU read section, as mentioned in the
following comment in include/linux/rculist.h:
/**
* hlist_for_each_entry_rcu - iterate over rcu list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the hlist_node within the struct.
* @cond: optional lockdep expression if called from non-RCU protection.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as hlist_add_head_rcu()
* as long as the traversal is guarded by rcu_read_lock().
*/
Currently, all calls to vhost_vsock_get() are between rcu_read_lock()
and rcu_read_unlock() except for calls in vhost_vsock_set_cid() and
vhost_vsock_reset_orphans(). In both cases, the current code is safe,
but we can make improvements to make it more robust.
About vhost_vsock_set_cid(), when building the kernel with
CONFIG_PROVE_RCU_LIST enabled, we get the following RCU warning when the
user space issues `ioctl(dev, VHOST_VSOCK_SET_GUEST_CID, ...)` :
WARNING: suspicious RCU usage
6.18.0-rc7 #62 Not tainted
-----------------------------
drivers/vhost/vsock.c:74 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by rpc-libvirtd/3443:
#0: ffffffffc05032a8 (vhost_vsock_mutex){+.+.}-{4:4}, at: vhost_vsock_dev_ioctl+0x2ff/0x530 [vhost_vsock]
This is not a real problem, because the vhost_vsock_get() caller, i.e.
vhost_vsock_set_cid(), holds the `vhost_vsock_mutex` used by the hash
table writers. Anyway, to prevent that warning, add lockdep_is_held()
condition to hash_for_each_possible_rcu() to verify that either the
caller is in an RCU read section or `vhost_vsock_mutex` is held when
CONFIG_PROVE_RCU_LIST is enabled; and also clarify the comment for
vhost_vsock_get() to better describe the locking requirements and the
scope of the returned pointer validity.
About vhost_vsock_reset_orphans(), currently this function is only
called via vsock_for_each_connected_socket(), which holds the
`vsock_table_lock` spinlock (which is also an RCU read-side critical
section). However, add an explicit RCU read lock there to make the code
more robust and explicit about the RCU requirements, and to prevent
issues if the calling context changes in the future or if
vhost_vsock_reset_orphans() is called from other contexts.
Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers") Cc: stefanha@redhat.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20251126133826.142496-1-sgarzare@redhat.com>
Message-ID: <20251126210313.GA499503@fedora> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
oot build tends to help uncover bugs so it's worth keeping around,
as long as it's low effort.
add stubs for a couple of macros virtio gained recently,
and disable vdpa in the test build.
tools/virtio: add dev_WARN_ONCE and is_vmalloc_addr stubs
Add dev_WARN_ONCE and is_vmalloc_addr stubs needed by virtio_ring.c.
is_vmalloc_addr stub always returns false - that's fine since it's
merely a sanity check.
Add #undef __user before and after including compiler_types.h to avoid
redefinition warnings when compiling with system headers that also
define __user. This allows tools/virtio to build without warnings.
Nikolay Kuratov [Thu, 11 Dec 2025 09:36:30 +0000 (12:36 +0300)]
drm/msm/dpu: Add missing NULL pointer check for pingpong interface
It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a
single place the check is missing.
Also use convenient locals instead of phys_enc->* where available.
Cc: stable@vger.kernel.org Fixes: d7d0e73f7de33 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/693860/ Link: https://lore.kernel.org/r/20251211093630.171014-1-kniv@yandex-team.ru Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Randy Dunlap [Fri, 19 Dec 2025 18:46:38 +0000 (10:46 -0800)]
drm/msm: msm_iommu.c: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/msm_iommu.c:381 expecting prototype for
alloc_pt(). Prototype was for msm_iommu_pagetable_alloc_pt() instead
Warning: ../drivers/gpu/drm/msm/msm_iommu.c:426 expecting prototype for
free_pt(). Prototype was for msm_iommu_pagetable_free_pt() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:37 +0000 (10:46 -0800)]
drm/msm: msm_gpu.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/msm_gpu.h:119 Incorrect use of kernel-doc
format: * devfreq: devfreq instance
Warning: drivers/gpu/drm/msm/msm_gpu.h:125 Incorrect use of kernel-doc
format: * idle_freq:
Warning: drivers/gpu/drm/msm/msm_gpu.h:136 Incorrect use of kernel-doc
format: * boost_constraint:
Warning: drivers/gpu/drm/msm/msm_gpu.h:144 Incorrect use of kernel-doc
format: * busy_cycles: Last busy counter value, for calculating elapsed
busy
Warning: drivers/gpu/drm/msm/msm_gpu.h:156 Incorrect use of kernel-doc
format: * idle_work:
Warning: drivers/gpu/drm/msm/msm_gpu.h:163 Incorrect use of kernel-doc
format: * boost_work:
Warning: drivers/gpu/drm/msm/msm_gpu.h:170 struct member 'devfreq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:170 struct member 'boost_freq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'devfreq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'lock' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'governor' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'we are
continuing to sample busyness and * adjust frequency while the GPU is
idle' not described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'boost_freq' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'busy_cycles'
not described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'time' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'idle_time' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'idle_work' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'boost_work' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:172 struct member 'suspended' not
described in 'msm_gpu_devfreq'
Warning: drivers/gpu/drm/msm/msm_gpu.h:472 No description found for
return value of 'msm_context_is_vmbind'
Warning: drivers/gpu/drm/msm/msm_gpu.h:476 struct member 'ref' not
described in 'msm_context'
Warning: drivers/gpu/drm/msm/msm_gpu.h:476 struct member 'elapsed_ns' not
described in 'msm_context'
Warning: drivers/gpu/drm/msm/msm_gpu.h:492 expecting prototype for
msm_context_is_vm_bind(). Prototype was for msm_context_is_vmbind()
instead
Warning: drivers/gpu/drm/msm/msm_gpu.h:523 No description found for
return value of 'msm_gpu_convert_priority'
Warning: drivers/gpu/drm/msm/msm_gpu.h:583 expecting prototype for
struct msm_gpu_submitqueues. Prototype was for struct msm_gpu_submitqueue
instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:35 +0000 (10:46 -0800)]
drm/msm: msm_fence.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/msm_fence.h:27 Incorrect use of kernel-doc
format: * last_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:36 Incorrect use of kernel-doc
format: * completed_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:44 Incorrect use of kernel-doc
format: * fenceptr:
Warning: drivers/gpu/drm/msm/msm_fence.h:65 Incorrect use of kernel-doc
format: * next_deadline_fence:
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'dev' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'name' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'context' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'index' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'fence' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'there is no
remaining pending work */ uint32_t last_fence' not described in
'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'updated from the CPU after interrupt * from GPU */ uint32_t completed_fence' not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'fenceptr' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'spinlock' not
described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'next_deadline'
not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member
'next_deadline_fence' not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'deadline_timer'
not described in 'msm_fence_context'
Warning: drivers/gpu/drm/msm/msm_fence.h:74 struct member 'deadline_work'
not described in 'msm_fence_context'
Randy Dunlap [Fri, 19 Dec 2025 18:46:34 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_wb.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:24 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:57 struct member
'setup_roi' not described in 'dpu_hw_wb_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.h:75 struct member
'caps' not described in 'dpu_hw_wb'
Randy Dunlap [Fri, 19 Dec 2025 18:46:33 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_vbif.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:19 Incorrect use of
kernel-doc format: * set_limit_conf - set transaction limit config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:29 Incorrect use of
kernel-doc format: * get_limit_conf - get transaction limit config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:39 Incorrect use of
kernel-doc format: * set_halt_ctrl - set halt control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:48 Incorrect use of
kernel-doc format: * get_halt_ctrl - get halt control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:57 Incorrect use of
kernel-doc format: * set_qos_remap - set QoS priority remap
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:67 Incorrect use of
kernel-doc format: * set_mem_type - set memory type
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:76 Incorrect use of
kernel-doc format: * clear_errors - clear any vbif errors
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:88 Incorrect use of
kernel-doc format: * set_write_gather_en - set write_gather enable
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'limit' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_limit_conf' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'get_limit_conf' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_halt_ctrl' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'get_halt_ctrl' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_qos_remap' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_mem_type' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
's' not described in 'dpu_hw_vbif_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_vbif.h:93 struct member
'set_write_gather_en' not described in 'dpu_hw_vbif_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:32 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_top.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:93 Incorrect use of
kernel-doc format: * setup_traffic_shaper() : Setup traffic shaper control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:101 Incorrect use of
kernel-doc format: * setup_clk_force_ctrl - set clock force control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:111 Incorrect use of
kernel-doc format: * get_danger_status - get danger status
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:119 Incorrect use of
kernel-doc format: * setup_vsync_source - setup vsync source
configuration details
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:127 Incorrect use of
kernel-doc format: * get_safe_status - get safe status
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:135 Incorrect use of
kernel-doc format: * dp_phy_intf_sel - configure intf to phy mapping
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:142 Incorrect use of
kernel-doc format: * intf_audio_select - select the external interface
for audio
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'setup_clk_force_ctrl' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'get_danger_status' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'setup_vsync_source' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'get_safe_status' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'dp_phy_intf_sel' not described in 'dpu_hw_mdp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h:146 struct member
'intf_audio_select' not described in 'dpu_hw_mdp_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:31 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_sspp.h: fix all kernel-doc warnings
Modify non-kernel-doc comments to begin with "/*" instead of "/**".
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:17 missing initial
short description on line: * Flags
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:19 expecting
prototype for Flags(). Prototype was for DPU_SSPP_FLIP_LR() instead
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:26 This comment
starts with '/**', but isn't a kernel-doc comment.
* Component indices
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:47 cannot understand
function prototype: 'enum dpu_sspp_multirect_index'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:152 struct member
'dst_rect' not described in 'dpu_sw_pipe_cfg'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:174 struct member
'multirect_index' not described in 'dpu_sw_pipe'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:174 struct member
'multirect_mode' not described in 'dpu_sw_pipe'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:183 Incorrect use of
kernel-doc format: * setup_format - setup pixel format cropping
rectangle, flip
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:192 Incorrect use of
kernel-doc format: * setup_rects - setup pipe ROI rectangles
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:200 Incorrect use of
kernel-doc format: * setup_pe - setup pipe pixel extension
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:208 Incorrect use of
kernel-doc format: * setup_sourceaddress - setup pipe source addresses
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:216 Incorrect use of
kernel-doc format: * setup_csc - setup color space coversion
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:223 Incorrect use of
kernel-doc format: * setup_solidfill - enable/disable colorfill
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:231 Incorrect use of
kernel-doc format: * setup_multirect - setup multirect configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:238 Incorrect use of
kernel-doc format: * setup_sharpening - setup sharpening
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:247 Incorrect use of
kernel-doc format: * setup_qos_lut - setup QoS LUTs
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:255 Incorrect use of
kernel-doc format: * setup_qos_ctrl - setup QoS control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:263 Incorrect use of
kernel-doc format: * setup_clk_force_ctrl - setup clock force control
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:271 Incorrect use of
kernel-doc format: * setup_histogram - setup histograms
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:279 Incorrect use of
kernel-doc format: * setup_scaler - setup scaler
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:288 Incorrect use of
kernel-doc format: * setup_cdp - setup client driven prefetch
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_format' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_rects' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_pe' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_sourceaddress' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_csc' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_solidfill' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_multirect' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_sharpening' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_qos_lut' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_qos_ctrl' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_clk_force_ctrl' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_histogram' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_scaler' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:296 struct member
'setup_cdp' not described in 'dpu_hw_sspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h:320 struct member
'mdss_ver' not described in 'dpu_hw_sspp'
Randy Dunlap [Fri, 19 Dec 2025 18:46:30 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_pingpong.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:36 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:46 Incorrect use
of kernel-doc format: * enables vysnc generation and sets up init value of
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:53 Incorrect use
of kernel-doc format: * disables tear check block
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:58 Incorrect use
of kernel-doc format: * read, modify, write to either set or clear
listening to external TE
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:65 Incorrect use
of kernel-doc format: * Obtain current vertical line counter
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:70 Incorrect use
of kernel-doc format: * Disable autorefresh if enabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:75 Incorrect use
of kernel-doc format: * Setup dither matix for pingpong block
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:80 Incorrect use
of kernel-doc format: * Enable DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:85 Incorrect use
of kernel-doc format: * Disable DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:90 Incorrect use
of kernel-doc format: * Setup DSC
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'connect_external_te' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'disable_autorefresh' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'enable_dsc' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'disable_dsc' not described in 'dpu_hw_pingpong_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_pingpong.h:93 struct member
'setup_dsc' not described in 'dpu_hw_pingpong_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:28 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_lm.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:27 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:52 Incorrect use of
kernel-doc format: * Clear layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:59 Incorrect use of
kernel-doc format: * Configure layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:69 Incorrect use of
kernel-doc format: * setup_border_color : enable/disable border color
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:76 Incorrect use of
kernel-doc format: * setup_misr: Enable/disable MISR
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:81 Incorrect use of
kernel-doc format: * collect_misr: Read MISR signature
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_mixer_out' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_blend_config' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_alpha_out' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'clear_all_blendstages' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_blendstage' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_border_color' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'setup_misr' not described in 'dpu_hw_lm_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_lm.h:84 struct member
'collect_misr' not described in 'dpu_hw_lm_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:27 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_intf.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:76 duplicate section
name 'Return'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:112 Incorrect use of
kernel-doc format: * Disable autorefresh if enabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'setup_timing_gen' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'setup_prg_fetch' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'enable_timing' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'get_status' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'get_line_count' not described in 'dpu_hw_intf_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h:118 struct member
'disable_autorefresh' not described in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'get_vsync_info'
description in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'setup_autorefresh'
description in 'dpu_hw_intf_ops'
dpu_hw_intf.h:119: warning: Excess struct member 'get_autorefresh'
description in 'dpu_hw_intf_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:26 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_dspp.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:33 expecting prototype
for struct dpu_hw_pcc. Prototype was for struct dpu_hw_pcc_cfg instead
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:42 Incorrect use of
kernel-doc format: * setup_pcc - setup dspp pcc
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:48 struct member
'setup_pcc' not described in 'dpu_hw_dspp_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dspp.h:76 expecting prototype
for dpu_hw_dspp(). Prototype was for to_dpu_hw_dspp() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:25 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_dsc.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:23 Incorrect use of
kernel-doc format: * dsc_disable - disable dsc
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:29 Incorrect use of
kernel-doc format: * dsc_config - configures dsc encoder
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:41 Incorrect use of
kernel-doc format: * dsc_config_thresh - programs panel thresholds
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_disable' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_config' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_config_thresh' not described in 'dpu_hw_dsc_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_dsc.h:50 struct member
'dsc_bind_pingpong_blk' not described in 'dpu_hw_dsc_ops'
Randy Dunlap [Fri, 19 Dec 2025 18:46:24 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_cwb.h: fix all kernel-doc warnings
Correct or add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cwb.h:30 Cannot find
identifier on line: *
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cwb.h:61 expecting prototype
for dpu_hw_cwb(). Prototype was for to_dpu_hw_cwb() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:23 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_ctl.h: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:18 cannot understand
function prototype: 'enum dpu_ctl_mode_sel'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:58 struct member 'wb'
not described in 'dpu_hw_intf_cfg'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:66 Incorrect use of
kernel-doc format: * kickoff hw operation for Sw controlled interfaces
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:73 Incorrect use of
kernel-doc format: * check if the ctl is started
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:80 Incorrect use of
kernel-doc format: * kickoff prepare is in progress hw operation for sw
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:88 Incorrect use of
kernel-doc format: * Clear the value of the cached pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:96 Incorrect use of
kernel-doc format: * Query the value of the cached pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:103 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:112 Incorrect use of
kernel-doc format: * OR in the given flushbits to the
cached pending_(wb_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:121 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(cwb_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:130 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(intf_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:139 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(periph_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:148 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(merge_3d_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:157 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:166 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:175 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:185 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(dsc_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:194 Incorrect use of
kernel-doc format: * OR in the given flushbits to the cached
pending_(cdm_)flush_mask
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:202 Incorrect use of
kernel-doc format: * Write the value of the pending_flush_mask to hardware
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:208 Incorrect use of
kernel-doc format: * Read the value of the flush register
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:215 Incorrect use of
kernel-doc format: * Setup ctl_path interface config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:223 Incorrect use of
kernel-doc format: * reset ctl_path interface config
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:244 Incorrect use of
kernel-doc format: * Set all blend stages to disabled
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:250 Incorrect use of
kernel-doc format: * Configure layer mixer to pipe configuration
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:262 Incorrect use of
kernel-doc format: * Set active pipes attached to this CTL
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:270 Incorrect use of
kernel-doc format: * Set active layer mixers attached to this CTL
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'trigger_start' not described in 'dpu_hw_ctl_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'is_started' not described in 'dpu_hw_ctl_ops'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:277 struct member
'trigger_pending' not described in 'dpu_hw_ctl_ops'
[many here]
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_periph_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_merge_3d_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:319 struct member
'pending_dspp_flush_mask' not described in 'dpu_hw_ctl'
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h:327 expecting
prototype for dpu_hw_ctl(). Prototype was for to_dpu_hw_ctl() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:22 +0000 (10:46 -0800)]
drm/msm/dpu: dpu_hw_cdm.h: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h:91 Incorrect use of
kernel-doc format: * Enable the CDM module
Warning: drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h:97 Incorrect use of
kernel-doc format: * Enable/disable the connection with pingpong
Randy Dunlap [Fri, 19 Dec 2025 18:46:21 +0000 (10:46 -0800)]
drm/msm/dp: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/dp/dp_debug.h:31 expecting prototype for
msm_dp_debug_get(). Prototype was for msm_dp_debug_init() instead
Warning: ../drivers/gpu/drm/msm/dp/dp_drm.c:24 function parameter
'connector' not described in 'msm_dp_bridge_detect'
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:90 expecting prototype for
mdss_dp_test_bit_depth_to_bpp(). Prototype was for
msm_dp_link_bit_depth_to_bpp() instead
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:126 function parameter
'aux' not described in 'msm_dp_link_get'
Warning: ../drivers/gpu/drm/msm/dp/dp_link.h:126 function parameter
'dev' not described in 'msm_dp_link_get'
Warning: ../drivers/gpu/drm/msm/dp/dp_panel.h:70 function parameter
'bw_code' not described in 'is_link_rate_valid'
Warning: ../drivers/gpu/drm/msm/dp/dp_panel.h:84 expecting prototype for
msm_dp_link_is_lane_count_valid(). Prototype was for
is_lane_count_valid() instead
Randy Dunlap [Fri, 19 Dec 2025 18:46:20 +0000 (10:46 -0800)]
drm/msm/disp: mdp_format: fix all kernel-doc warnings
Correct and add kernel-doc comments to eliminate all warnings:
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:27 This comment starts
with '/**', but isn't a kernel-doc comment.
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_a' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_b_cb' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_g_y' not described in 'msm_format'
Warning: ../drivers/gpu/drm/msm/disp/mdp_format.h:64 struct member
'bpc_r_cr' not described in 'msm_format'
Linus Torvalds [Tue, 23 Dec 2025 17:13:33 +0000 (09:13 -0800)]
Merge tag 'sound-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Likely the last pull request in 2025, again a collection of lots of
small fixes. Most of them are various device-specific small fixes:
- An ASoC core fix for correcting the clamping behavior of *_SX mixer
elements
- Various fixes for ASoC fsl, SOF, etc
- Usual HD- and USB-audio quirks / fix-ups
- A couple of error-handling fixes for legacy PCMCIA drivers"
* tag 'sound-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: hda/realtek: fix PCI SSID for one of the HP 200 G2i laptop
ASoC: ops: fix snd_soc_get_volsw for sx controls
ALSA: hda/realtek: Add Asus quirk for TAS amplifiers
ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L63 with feedback
ASoC: Intel: soc-acpi-intel-mtl-match: Add 6 amp CS35L56 with feedback
ASoC: fsl-asoc-card: Use of_property_present() for non-boolean properties
ASoC: rt1320: update VC blind write settings
ASoC: fsl_xcvr: provide regmap names
ASoC: fsl_sai: Add missing registers to cache default
ASoC: ak4458: remove the reset operation in probe and remove
ASoC: fsl_asrc_dma: fix duplicate debugfs directory error
ASoC: fsl_easrc: fix duplicate debugfs directory error
ALSA: hda/realtek: fix micmute LED reversed on HP Abe and Bantie
ALSA: hda/realtek: Add support for HP Clipper Laptop
ALSA: hda/realtek: Add support for HP Trekker Laptop
ALSA: usb-mixer: us16x08: validate meter packet indices
ASoC: Intel: soc-acpi-intel-nvl-match: Drop rt722 l3 from the match table
ASoC: soc-acpi / SOF: Add best_effort flag to get_function_tplg_files op
ASoC: SOF: Intel: pci-mtl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: ipc4-topology: set playback channel mask
...
Mark Brown [Tue, 23 Dec 2025 15:18:22 +0000 (15:18 +0000)]
spi: cadence-quadspi: Prevent indirect read
Merge series from Mateusz Litwin <mateusz.litwin@nokia.com>:
On the Stratix10 platform, indirect reads can become very slow due to lost
interrupts and/or missed `complete()` calls, causing
`wait_for_completion_timeout()` to expire.
Three issues were identified:
1) A race condition exists between the read loop and IRQ `complete()`
call:
An IRQ can call `complete()` after the inner loop ends, but before
`reinit_completion()`, losing the completion event and leading to
`wait_for_completion_timeout()` expire. This function will not return
an error because `bytes_to_read` > 0 (indicating data is already in the
FIFO) and the final `ret` value is overwritten by
`cqspi_wait_for_bit()` return value (indicating request completion),
masking the timeout.
For test purpose, logging was added to print the count of timeouts and
the outer loop count.
$ dd if=/dev/mtd0 of=/dev/null bs=64M count=1
[ 2232.925219] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12472)
[ 2236.200391] cadence-qspi ff8d2000.spi: Indirect read error timeout
(1) loop (12460)
[ 2239.482836] cadence-qspi ff8d2000.spi: Indirect read error timeout
(5) loop (12450)
This indicates that such an event is rare, but possible.
Tested on the Stratix10 platform.
2) The quirk assumes the indirect read path never leaves the inner loop on
SoCFPGA. This assumption is incorrect when using slow flash. Disabling
IRQs in the inner loop can cause lost interrupts.
3) The `CQSPI_SLOW_SRAM` quirk disables `CQSPI_REG_IRQ_IND_COMP` (indirect
completion) interrupt, relying solely on the `CQSPI_REG_IRQ_WATERMARK`
(FIFO watermark) interrupt. For small transfers sizes, the final data
read might not fill the FIFO sufficiently to trigger the watermark,
preventing completion and leading to wait_for_completion_timeout()
expiration.
Two patches have been prepared to resolve these issues.
- [1/2] spi: cadence-quadspi: Prevent lost complete() call during
indirect read
Moving `reinit_completion()` before the inner loop prevents a race
condition. This might cause a premature IRQ complete() call to occur;
however, in the worst case, this will result in a spurious wakeup and
another wait cycle, which is preferable to waiting for a timeout.
- [2/2] spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is
slow
Re-enabling `CQSPI_REG_IRQ_IND_COMP` interrupt resolves the problem for
small reads and removes the disabling of interrupts, addressing the
issue with lost interrupts. This marginally increases the IRQ count.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without `CQSPI_SLOW_SRAM` quirk: 16 668 850
With `CQSPI_SLOW_SRAM` quirk: 204 176
With `CQSPI_SLOW_SRAM` and this patch: 224 528
Patch 2/2: Delivers a substantial read‑performance improvement for the
Cadence QSPI controller on the Stratix10 platform. Patch 1/2: Applies to
all platforms and should yield a modest performance gain, most noticeable
with large `CQSPI_READ_TIMEOUT_MS` values and workloads dominated by many
small reads.
Will Rosenberg [Wed, 17 Dec 2025 06:01:07 +0000 (23:01 -0700)]
fs/kernfs: null-ptr deref in simple_xattrs_free()
There exists a null pointer dereference in simple_xattrs_free() as
part of the __kernfs_new_node() routine. Within __kernfs_new_node(),
err_out4 calls simple_xattr_free(), but kn->iattr may be NULL if
__kernfs_setattr() was never called. As a result, the first argument to
simple_xattrs_free() may be NULL + 0x38, and no NULL check is done
internally, causing an incorrect pointer dereference.
Add a check to ensure kn->iattr is not NULL, meaning __kernfs_setattr()
has been called and kn->iattr is allocated. Note that struct kernfs_node
kn is allocated with kmem_cache_zalloc, so we can assume kn->iattr will
be NULL if not allocated.
An alternative fix could be to not call simple_xattrs_free() at all. As
was previously discussed during the initial patch, simple_xattrs_free()
is not strictly needed and is included to be consistent with
kernfs_free_rcu(), which also helps the function maintain correctness if
changes are made in __kernfs_new_node().
Reported-by: syzbot+6aaf7f48ae034ab0ea97@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6aaf7f48ae034ab0ea97 Fixes: 382b1e8f30f7 ("kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node") Signed-off-by: Will Rosenberg <whrosenb@asu.edu> Link: https://patch.msgid.link/20251217060107.4171558-1-whrosenb@asu.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge patch series "usb: typec: ucsi: revert broken buffer management"
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c331 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
The new buffer management code that this feature relies on is broken so
revert for now.
As for the in buffer, nothing prevents the out message size and buffer
from being modified while the message is being processed due to lack of
serialisation.
There are reported issues in this file, so revert the commit for now so
that the original offending changes can be reverted and working systems
can be restored. This can come back at a later time if it is rebased
yet-again (sorry.)
Cc: stable <stable@kernel.org> Cc: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org Fixes: 5106dbab44fb ("usb: typec: ucsi: Get connector status after enable notifications") Cc: Kenneth R. Crudup <kenny@panix.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Hsin-Te Yuan <yuanhsinte@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe") Cc: stable@vger.kernel.org Cc: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 18 Dec 2025 15:35:15 +0000 (16:35 +0100)]
usb: gadget: lpc32xx_udc: fix clock imbalance in error path
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe") Cc: stable@vger.kernel.org Cc: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hsin-Te Yuan [Thu, 18 Dec 2025 07:37:57 +0000 (15:37 +0800)]
usb: typec: ucsi: Get connector status after enable notifications
Originally, the notification for connector change will be enabled after
the first read of the connector status. Therefore, if the event happens
during this window, it will be missing and make the status unsynced.
Get the connector status only after enabling the notification for
connector change to ensure the status is synced.
Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: stable <stable@kernel.org> Tested-by: Kenneth R. Crudup <kenny@panix.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Hsin-Te Yuan <yuanhsinte@chromium.org> Link: https://patch.msgid.link/20251218-ucsi-v7-1-aea83e83fb12@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chen Changcheng [Thu, 18 Dec 2025 01:23:18 +0000 (09:23 +0800)]
usb: usb-storage: Maintain minimal modifications to the bcdDevice range.
We cannot determine which models require the NO_ATA_1X and
IGNORE_RESIDUE quirks aside from the EL-R12 optical drive device.
Fixes: 955a48a5353f ("usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.") Signed-off-by: Chen Changcheng <chenchangcheng@kylinos.cn> Link: https://patch.msgid.link/20251218012318.15978-1-chenchangcheng@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mateusz Litwin [Thu, 18 Dec 2025 21:33:05 +0000 (22:33 +0100)]
spi: cadence-quadspi: Improve CQSPI_SLOW_SRAM quirk if flash is slow
CQSPI_SLOW_SRAM quirk on the Stratix10 platform causes fewer interrupts,
but also causes timeouts if a small block is used or if flash devices are
slower than or equal in speed to SRAM's read operations. Adding the
CQSPI_REG_IRQ_IND_COMP interrupt would resolve the problem for small
reads, and removing the disabling of interrupts would resolve the issue
with lost interrupts.
This marginally increases IRQ count. Tests show that this will cause only
a few percent more interrupts.
Test:
$ dd if=/dev/mtd0 of=/dev/null bs=1M count=64
Results from the Stratix10 platform with mt25qu02g flash.
FIFO size in all tests: 128
Serviced interrupt call counts:
Without CQSPI_SLOW_SRAM quirk: 16 668 850
With CQSPI_SLOW_SRAM quirk: 204 176
With CQSPI_SLOW_SRAM and this commit: 224 528
Mateusz Litwin [Thu, 18 Dec 2025 21:33:04 +0000 (22:33 +0100)]
spi: cadence-quadspi: Prevent lost complete() call during indirect read
A race condition exists between the read loop and IRQ `complete()` call.
An interrupt could call the complete() between the inner loop and
reinit_completion(), potentially losing the completion event and causing
an unnecessary timeout. Moving reinit_completion() before the loop
prevents this. A premature signal will only result in a spurious wakeup
and another wait cycle, which is preferable to waiting for a timeout.
RTS line control with delay should be triggered when there is no more
bytes in kfifo and hardware buffer is empty. Without this patch RTS
control is scheduled right after feeding hardware buffer and this is too
early.
RTS line may change state before hardware buffer is empty.
With this patch delayed RTS state change is triggered when function
cdns_uart_handle_tx is called from cdns_uart_isr on
CDNS_UART_IXR_TXEMPTY exactly when hardware completed transmission
Fixes: fccc9d9233f9 ("tty: serial: uartps: Add rs485 support to uartps driver") Cc: stable <stable@kernel.org> Link: https://patch.msgid.link/20251221103221.1971125-1-jakub.turek@elsta.tech Signed-off-by: Jakub Turek <jakub.turek@elsta.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claudiu Beznea [Wed, 17 Dec 2025 13:57:59 +0000 (15:57 +0200)]
serial: sh-sci: Check that the DMA cookie is valid
The driver updates struct sci_port::tx_cookie to zero right before the TX
work is scheduled, or to -EINVAL when DMA is disabled.
dma_async_is_complete(), called through dma_cookie_status() (and possibly
through dmaengine_tx_status()), considers cookies valid only if they have
values greater than or equal to 1.
Passing zero or -EINVAL to dmaengine_tx_status() before any TX DMA
transfer has started leads to an incorrect TX status being reported, as the
cookie is invalid for the DMA subsystem. This may cause long wait times
when the serial device is opened for configuration before any TX activity
has occurred.
Check that the TX cookie is valid before passing it to
dmaengine_tx_status().
Fixes: 7cc0e0a43a91 ("serial: sh-sci: Check if TX data was written to device in .tx_empty()") Cc: stable <stable@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Link: https://patch.msgid.link/20251217135759.402015-1-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Stein [Fri, 19 Dec 2025 15:28:12 +0000 (16:28 +0100)]
serial: core: Fix serial device initialization
During restoring sysfs fwnode information the information of_node_reused
was dropped. This was previously set by device_set_of_node_from_dev().
Add it back manually
Linus Torvalds [Mon, 22 Dec 2025 17:37:59 +0000 (09:37 -0800)]
Merge tag 'dma-mapping-6.19-2025-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
- fix boot failure of parisc systems after recent rework of the DMA API
infrastructure (Leon Romanovsky)
* tag 'dma-mapping-6.19-2025-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
parisc: Set valid bit in high byte of 64‑bit physical address
powerpc/32: Restore disabling of interrupts at interrupt/syscall exit
Commit 2997876c4a1a ("powerpc/32: Restore clearing of MSR[RI] at
interrupt/syscall exit") delayed clearing of MSR[RI], but missed that
both MSR[RI] and MSR[EE] are cleared at the same time, so the commit
also delayed the disabling of interrupts, leading to unexpected
behaviour.
To fix that, mostly revert the blamed commit and restore the clearing
of MSR[RI] in interrupt_exit_kernel_prepare() instead. For 8xx it
implies adding a synchronising instruction after the mtspr in order to
make sure no instruction counter interrupt (used for perf events) will
fire just after clearing MSR[RI].
powerpc/powernv: Enable cpuidle state detection for POWER11
Extend cpuidle state detection to POWER11 by updating the PVR check.
This ensures POWER11 correctly recognizes supported stop states,
similar to POWER9 and POWER10.
Without Patch: (Power11 - PowerNV systems)
CPUidle driver: powernv_idle
CPUidle governor: menu
analyzing CPU 927:
Number of idle states: 1
Available idle states: snooze
snooze:
Flags/Description: snooze
Latency: 0
Usage: 251631
Duration: 207497715900
--
With Patch: (Power11 - PowerNV systems)
CPUidle driver: powernv_idle
CPUidle governor: menu
analyzing CPU 959:
Sakari Ailus [Fri, 19 Dec 2025 08:36:38 +0000 (10:36 +0200)]
software node: Also support referencing non-constant software nodes
Fwnode references are be implemented differently if referenced node is a
software node. _Generic() is used to differentiate between the two cases
but only const software nodes were present in the selection. Also add
non-const software nodes.
Finn Thain [Sun, 9 Nov 2025 23:30:22 +0000 (10:30 +1100)]
powerpc: Add reloc_offset() to font bitmap pointer used for bootx_printf()
Since Linux v6.7, booting using BootX on an Old World PowerMac produces
an early crash. Stan Johnson writes, "the symptoms are that the screen
goes blank and the backlight stays on, and the system freezes (Linux
doesn't boot)."
Further testing revealed that the failure can be avoided by disabling
CONFIG_BOOTX_TEXT. Bisection revealed that the regression was caused by
a change to the font bitmap pointer that's used when btext_init() begins
painting characters on the display, early in the boot process.
Christophe Leroy explains, "before kernel text is relocated to its final
location ... data is addressed with an offset which is added to the
Global Offset Table (GOT) entries at the start of bootx_init()
by function reloc_got2(). But the pointers that are located inside a
structure are not referenced in the GOT and are therefore not updated by
reloc_got2(). It is therefore needed to apply the offset manually by using
PTRRELOC() macro."
Nysal Jan K.A. [Tue, 28 Oct 2025 10:55:12 +0000 (16:25 +0530)]
powerpc/kexec: Enable SMT before waking offline CPUs
If SMT is disabled or a partial SMT state is enabled, when a new kernel
image is loaded for kexec, on reboot the following warning is observed:
kexec: Waking offline cpu 228.
WARNING: CPU: 0 PID: 9062 at arch/powerpc/kexec/core_64.c:223 kexec_prepare_cpus+0x1b0/0x1bc
[snip]
NIP kexec_prepare_cpus+0x1b0/0x1bc
LR kexec_prepare_cpus+0x1a0/0x1bc
Call Trace:
kexec_prepare_cpus+0x1a0/0x1bc (unreliable)
default_machine_kexec+0x160/0x19c
machine_kexec+0x80/0x88
kernel_kexec+0xd0/0x118
__do_sys_reboot+0x210/0x2c4
system_call_exception+0x124/0x320
system_call_vectored_common+0x15c/0x2ec
This occurs as add_cpu() fails due to cpu_bootable() returning false for
CPUs that fail the cpu_smt_thread_allowed() check or non primary
threads if SMT is disabled.
Fix the issue by enabling SMT and resetting the number of SMT threads to
the number of threads per core, before attempting to wake up all present
CPUs.
Chen-Yu Tsai [Sun, 21 Dec 2025 11:05:09 +0000 (19:05 +0800)]
spi: sun6i: Support A523's SPI controllers
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Support the standard SPI mode controllers using the settings for R329.
DBI is left out as there currently is no infrastructure for enabling a
DBI host controller, as was the case for the R329.
Also fold the entry for the R329 to make the style consistent.
Chen-Yu Tsai [Sun, 21 Dec 2025 11:05:08 +0000 (19:05 +0800)]
spi: dt-bindings: sun6i: Add compatibles for A523's SPI controllers
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Add new compatible strings for the new controllers.
projects / thirdparty / kernel / linux.git / log
