drm/amdgpu: Implement unrecoverable error message handling for VFs

This notification may arrive in VF mailbox while polling for response from
another event.

This patches covers the following scenarios:

- If VF is already in RMA state, then do not attempt to contact the host.
  Host will ignore the VF after sending the notification.

- If the notification is detected during polling, then set the RMA status,
  and return error to caller.

- If the notification arrives by interrupt, then set the RMA status and
  queue a reset.  This reset will fail and VF will stop runtime services.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add unrecoverable error message definitions for VFs

Host may stop runtime services after reaching a bad page threshold.

This notification will indicate to the VF that it no longer has
access to the GPU.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd: Stop evicting resources on APUs in suspend"

This reverts commit 3a9626c816db901def438dc2513622e281186d39.

This breaks S4 because we end up setting the s3/s0ix flags
even when we are entering s4 since prepare is used by both
flows.  The causes both the S3/s0ix and s4 flags to be set
which breaks several checks in the driver which assume they
are mutually exclusive.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3634
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: using separate VCN1_AON_SOC offset

VCN1_AON_SOC_ADDRESS_3_0 offset varies on different
VCN generations, the issue in vcn4.0.5 is caused by
a different VCN1_AON_SOC_ADDRESS_3_0 offset.

This patch does the following:

    1. use the same offset for other VCN generations.
    2. use the vcn4.0.5 special offset
    3. update vcn_4_0 and vcn_5_0

Acked-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix the eviction fence dereference

The dma_resv_add_fence() already refers to the added fence.
So when attaching the evciton fence to the gem bo, it needn't
refer to it anymore.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Implement Runtime Bad Page query for VFs

Host will send a notification when new bad pages are available.

Uopn guest request, the first 256 bad page addresses
will be placed into the PF2VF region.
Guest should pause the PF2VF worker thread while
the copy is in progress.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add Runtime Bad Page message definitions for VFs

Currently VFs rely on poison consumption interrupt from HW
to kick off the bad page retirement process. Part of this process
includes a VF reset.

This patch adds the following:

1) Host Bad Pages notification message.
2) Guest request bad pages message.

When combined, VFs are able to reserve the pages early, and potentially
avoid future poison consumption that will disrupt user services
from consequent FLR.

Reviewed-by: Shravan Kumar Gande <Shravankumar.Gande@amd.com>
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/gpu: Add new entries to amdgpu glossary

Add some additional entries.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add documentation to some parts of the AMDGPU ring and wb

Add some random documentation associated with the ring buffer
manipulations and writeback.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: change error to warning message for SDMA queues creation

SDMA doesn't support oversubsciption, it is the user matter to create
queues over HW limit, but not supposed to be a KFD error.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't check for NULL divisor in fixpt code

[Why]
We check for a NULL divisor but don't act on it.
This check does nothing other than throw a warning.
It does confuse static checkers though:
See https://lkml.org/lkml/2025/4/26/371

[How]
Drop the ASSERTs in both DC and SPL variants.

Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Fixes: 6efc0ab3b05d ("drm/amd/display: add back quality EASF and ISHARP and dc dependency changes")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use true/false for boolean variables in DML2 core files

Replace 0 and 1 with false and true for boolean variables in
dml2_core_dcn4_calcs.c and dml2_core_utils.c to align with the Linux
kernel coding style guidelines, which recommend using C99 bool type
with true/false values.

Signed-off-by: Ivan Shamliev <ivan.shamliev.dev@abv.bg>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: adds kernel-doc comment for dc_stream_remove_writeback()

Adds kernel-doc for externally linked dc_stream_remove_writeback function.

Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: only keep most recent fence for each context

Keep only the latest fences to reduce the number of values
given back to userspace

v2: - Export this code from dma-fence-unwrap.c(by Christian).
v3: - To split this in a dma_buf patch and amd userq patch(by Sunil).
    - No need to add a new function just re-use existing(by Christian).
v4: Export dma_fence_dedub_array function and used it(by Christian).

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add Support for enforcing isolation without Cleaner Shader

Adjusted the enforce isolation setting handling to include the ability
to disable the cleaner shader without affecting isolation between tasks.

v2: Updated enforce isolation documentation and parameters. (Alex)

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dma-fence: Add helper to sort and deduplicate dma_fence arrays

Export a new helper function `dma_fence_dedup_array()` that sorts
an array of dma_fence pointers by context, then deduplicates the array
by retaining only the most recent fence per context.

This utility is useful when merging or optimizing sets of fences where
redundant entries from the same context can be pruned. The operation is
performed in-place and releases references to dropped fences using
dma_fence_put().

v2: - Export this code from dma-fence-unwrap.c(by Christian).
v3: - To split this in a dma_buf patch and amd userq patch(by Sunil).
    - No need to add a new function just re-use existing(by Christian).
v4: - Export dma_fence_dedub_array and use it(by Christian).

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change DRM_DBG_DRIVER to drm_dbg_driver

update the functions in amdgpu_userqueues.c from
DRM_DBG_DRIVER to drm_dbg_driver so multi gpu instance
can be logged in.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: change DRM_ERROR to drm_file_err in amdgpu_userq.c

change the DRM_ERROR and drm_err to drm_file_err
to add process name and pid to the logging.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use drm_file_err in fence timeouts

use drm_file_err instead of DRM_ERROR which adds
process and pid information in the userqueue error
logging.

Sample log:

[   19.802315] amdgpu 0000:0a:00.0: [drm] *ERROR* comm: ibus-x11 pid: 2055 client: Unset ... Couldn't unmap all the queues
[   19.802319] amdgpu 0000:0a:00.0: [drm] *ERROR* comm: ibus-x11 pid: 2055 client: Unset ... Failed to evict userqueue
[   19.838432] amdgpu 0000:0a:00.0: [drm] *ERROR* comm: systemd-logind pid: 1042 client: Unset ... Couldn't unmap all the queues
[   19.838436] amdgpu 0000:0a:00.0: [drm] *ERROR* comm: systemd-logind pid: 1042 client: Unset ... Failed to evict userqueue

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add drm_file reference in userq_mgr

drm_file will be used in usermode queues code to
enable better process information in logging and hence
add drm_file part of the userq_mgr struct.

update the drm_file pointer in userq_mgr for each
amdgpu_driver_open_kms.

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: add drm_file_err function to add process info

Add a drm helper function which appends the process information for
the drm_file over drm_err formatted output.

v5: change to macro from function (Christian Koenig)
    add helper functions for lock/unlock (Christian Koenig)

v6: remove __maybe_unused and make function inline (Jani Nikula)
    remove drm_print.h

v7: Use va_format and %pV to concatenate fmt and vargs (Jani Nikula)

v8: Code formatting and typos (Ursulin tvrtko)

Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DC to 3.2.331

Summary

* Remove redundant NULL check
* Fix invalid context error in dml helper
* Prepare for Fused I2C-over-AUX
* Allow DSCClock disable
* Vmax / Vmin update for Vsync
* Fix race condition in DPIA AUX transfer
* Fix wrong handling for AUX_DEFER case
* Only wait for required space in DMUB mailbox

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Only wait for required free space in DMUB mailbox

[WHY&HOW]
When command submission is blocked by a full mailbox, only wait for
enough space to free to submit the command, instead of waiting for idle.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Assign preferred stream encoder instance to dpia

[Why]
For dpia, preferred engine instance availability is not checked
when assigning stream encoder instance.

[How]
Check for dpia preferred engine id and assign the same stream
encoder instance for the stream if available.

Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix wrong handling for AUX_DEFER case

[Why]
We incorrectly ack all bytes get written when the reply actually is defer.
When it's defer, means sink is not ready for the request. We should
retry the request.

[How]
Only reply all data get written when receive I2C_ACK|AUX_ACK. Otherwise,
reply the number of actual written bytes received from the sink.
Add some messages to facilitate debugging as well.

Fixes: ad6756b4d773 ("drm/amd/display: Shift dc link aux to aux_payload")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy AUX read reply data whenever length > 0

[Why]
amdgpu_dm_process_dmub_aux_transfer_sync() should return all exact data
reply from the sink side. Don't do the analysis job in it.

[How]
Remove unnecessary check condition AUX_TRANSACTION_REPLY_AUX_ACK.

Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove incorrect checking in dmub aux handler

[Why & How]
"Request length != reply length" is expected behavior defined in spec.
It's not an invalid reply. Besides, replied data handling logic is not
designed to be written in amdgpu_dm_process_dmub_aux_transfer_sync().
Remove the incorrectly handling section.

Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix the checking condition in dmub aux handling

[Why & How]
Fix the checking condition for detecting AUX_RET_ERROR_PROTOCOL_ERROR.
It was wrongly checking by "not equals to"

Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Shift DMUB AUX reply command if necessary

[Why]
Defined value of dmub AUX reply command field get updated but didn't
adjust dm receiving side accordingly.

[How]
Check the received reply command value to see if it's updated version
or not. Adjust it if necessary.

Fixes: ead08b95fa50 ("drm/amd/display: Fix race condition in DPIA AUX transfer")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor SubVP cursor limiting logic

[WHY]
There are several gaps that can result in SubVP being enabled with
incompatible HW cursor sizes, and unjust restrictions to cursor size due
to wrong predictions on future usage of SubVP.

[HOW]
- remove "prediction" logic in favor of tagging based on previous SubVP
  usage
- block SubVP if current HW cursor settings are incompatible
- provide interface for DM to determine if HW cursor should be disabled
  due to an attempt to enable SubVP

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Call FP Protect Before Mode Programming/Mode Support

[Why]
Memory allocation occurs within dml21_validate() for adding phantom planes.
May cause kernel to be tainted due to usage of FP Start.

[How]
Move FP start from dml21_validate to before mode programming/mode support.
Calculations requiring floating point are all done within mode programming
or mode support.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unnecessary DC_FP_START/DC_FP_END

[WHY & HOW]
Remove the unnecessary DC_FP_START/DC_FP_END pair to reduce time in
preempt_disable. It also fixes "BUG: sleeping function called from
invalid context" error messages because of calling kzalloc with
GFP_KERNEL which can sleep.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Send IPSExit unconditionally.

[Why&How]
PMFW needs to flush page cache in IPSExit.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe Xu <JinZe.Xu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add skip rIOMMU dc config option

[Why]
Need option to skip rIOMMU calls for dcn21.

[How]
Added rIOMMU dc config option and check for whether to skip
rIOMMU calls.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Kevin Gao <kgao1003@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: turn off eDP lcdvdd and backlight if not required"

This reverts commit 0d93e821867c ("drm/amd/display: turn off eDP lcdvdd and backlight if not required")

Reason for revert: Causes S4 lightup regressions.

Reviewed-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.1.8.0

Undefined unnecessary definition to avoid wrong referring

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: disable DPP RCG before DPP CLK enable

[why]
DPP CLK enable needs to disable DPPCLK RCG first.
The DPPCLK_en in dccg should always be enabled when the corresponding
pipe is enabled.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: more liberal vmin/vmax update for freesync

[Why]
FAMS2 expects vmin/vmax to be updated in the case when freesync is
off, but supported. But we only update it when freesync is enabled.

[How]
Change the vsync handler such that dc_stream_adjust_vmin_vmax() its called
irrespective of whether freesync is enabled. If freesync is supported,
then there is no harm in updating vmin/vmax registers.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3546
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: allow dscclk disable

[why]
when dscclk rcg disabled from usr reg option,
dsc clock will remain enabled because driver was doing two things
both dscclk and dsc rcg in the same routine.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amd/display: Refactor SubVP cursor limiting logic"

This reverts commit 19e743f0fb73 ("drm/amd/display: Refactor SubVP cursor limiting logic")

Reason for revert: Corruption

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Prepare for Fused I2C-over-AUX

[Why]
Passive DP-HDMI dongles use I2C-over-AUX protocol which is currently
not supported using HDCP Locality Check FW path.

[How]
Prepare code for switching to I2C-over-AUX protocol. Passive dongle
detection to be added in another commit.

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix invalid context error in dml helper

[Why]
"BUG: sleeping function called from invalid context" error.
after:
"drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()"

The populate_dml_plane_cfg_from_plane_state() uses the GFP_KERNEL flag
for memory allocation, which shouldn't be used in atomic contexts.

The allocation is needed only for using another helper function
get_scaler_data_for_plane().

[How]
Modify helpers to pass a pointer to scaler_data within existing context,
eliminating the need for dynamic memory allocation/deallocation
and copying.

Fixes: 366e77cd4923 ("drm/amd/display: Protect FPU in dml2_validate()/dml21_validate()")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove redundant null check

[WHY & HOW]
The null check for connector was dereferenced previously in the same
function and the caller.

Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Always Scale Flag

[Why & How]
When always scale flag is set at the API level, the number of taps
should not be overridden to zero in the identity scaling ratio case,
and luma scale should not be set to bypass regardless of luma scale
ratio

Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Jesse Agate <jesse.agate@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Promote DC to 3.2.330

Summary

* Update IPS checks to properly include all ASICs.
* Refactoring DSC enum dsc_bits_per_comp
* Fix ACPI edid parsing issue
* Update AUX read interval for LTTPR with old sinks
* Correct prefetch calculation

Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactoring DSC enum dsc_bits_per_comp.

[Why]
Previously the 'dsc_bits_per_comp' enumeration was defined in individual
.c files, making it unavailable for other files that may need it.

[How]
The 'dsc_bits_per_comp' enumeration has been relocated to a common header
file.

Reviewed-by: Mounika Adhuri <Mounika.Adhuri@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update IPS sequential_ono requirement checks

[why & how]
ASICs that require special RCG/PG programming are determined based
on hw_internal_rev. Update these checks to properly include all such
ASICs.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <Ovidiu.Bunea@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Rename program_timing function for better debugging

[WHY]
Improve the output when using the ftrace debug feature,
making it easier to identify which function is currently being executed.

[HOW]
Rename the program_timing function to a name that
includes the path to the function's file.

Signed-off-by: Antonio Fernando Silva e Cruz Filho <fernando.cruz.ctt@gmail.com>
Co-developed-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com>
Signed-off-by: André Nogueira Ribeiro <r.andrenogueira@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/userq: remove unnecessary NULL check

The "ticket" pointer points to in the middle of the &exec struct so it
can't be NULL.  Remove the check.

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/userq: Call unreserve on error in amdgpu_userq_fence_read_wptr()

This error path should call amdgpu_bo_unreserve() before returning.

Fixes: d8675102ba32 ("drm/amdgpu: add vm root BO lock before accessing the vm")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: properly handle GC vs MM in amdgpu_vmid_mgr_init()

When kernel queues are disabled, all GC vmids are available
for the scheduler.  MM vmids are still managed by the driver
so make all 16 available.

Also fix gmc 10 vs 11 mix up in
commit 1f61fc28b939 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")

v2: Properly handle pre-GC 10 hardware

Fixes: 1f61fc28b939 ("drm/amdgpu/mes: make more vmids available when disable_kq=1")
Cc: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: use correct MES pipe for resets

Use the KIQ pipe for kernel queues and the SCHED pipe for
user queues.

Fixes: 2408b0272b04 ("drm/amdgpu/mes: consolidate on a single mes reset callback")
Cc: Michael Chen <Michael.Chen@amd.com>
Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Michael Chen <michael.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: consolidate on a single mes reset callback

Use the legacy one as it covers both kernel queues and
user queues.

Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: remove more unused functions

These were leftover from mes bring up and are unused.

Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/userq: fix user_queue parameters list

Sphinx reports htmldocs warning:

Documentation/gpu/amdgpu/module-parameters:7: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:1119: ERROR: Unexpected indentation. [docutils]

Fix the warning by using reST bullet list syntax for user_queue
parameter options, separated from preceding paragraph by a blank
line.

Fixes: fb20954c9717 ("drm/amdgpu/userq: rework driver parameter")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250422202956.176fb590@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix comment style

Fix code comment style

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504271826.xy2fFO28-lkp@intel.com/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fix comment style

Fix code comment style

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504271422.D6cqMlZ0-lkp@intel.com/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Print bootloader status for long waits

If it needs a long wait for completion of bootloader execution, report
the status in between. That helps to know if there is some issue during
bootloader execution.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine MES register print for devices of hive

[Why]
Register access print missed device info.

[How]
Using dev_xxx instead of DRM_xxx to indicate which device
of a hive is the message for.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix query order of XGMI v6.4.1 status

Keep the register offsets as per link order for querying XGMI v6.4.1
link status.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Fixes: 6dee64e765c4 ("drm/amdgpu: Fix xgmi v6.4.1 link status reporting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add board voltage node to hwmon

Add and expose board voltage node as vddboard to hwmon for smu_v13_0_6

v2: Replace ip check with supported sensor attribute(Lijo)

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix API status offset for MES queue reset

The mes_v11_0_reset_hw_queue and mes_v12_0_reset_hw_queue functions were
using the wrong union type (MESAPI__REMOVE_QUEUE) when getting the offset
for api_status. Since these functions handle queue reset operations, they
should use MESAPI__RESET union instead.

This fixes the polling of API status during hardware queue reset operations
in the MES for both v11 and v12 versions.

Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-By: Shaoyun.liu <Shaoyun.liu@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add voltage caps for smu_v13_0_6

Add & enable board voltage caps for smu_v13_0_6

v3: Update version check for board voltage support

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Fill static metrics data

Fill static metrics data for smu_v13_0_6

v2: Proceed with driver load just with warning even if board
voltage reads invalid value

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Use common function to fetch static metrics table

Use common function to fetch static metrics table for smu_v13_0_12

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pn: Fetch static metrics table

Fetch static metrics table for smu_v13_0_6

v2: Add static metrics caps check to fetch static metrics table

v3: Update version having all fixes for static metrics support

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Update pmfw headers for smu_v_13_0_6

Update pmfw headers for smu_v_13_0_6 to include static metrics table

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/userq: take the userq_mgr lock in enforce isolation

Add the missing locking.

Fixes: 94976e7e5ede ("drm/amdgpu/userq: add helpers to start/stop scheduling")
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/userq: take the userq_mgr lock in suspend/resume

Add the missing locking.

Fixes: 73e12e98ec0c ("drm/amdgpu/userq: add suspend and resume helpers")
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add DPG pause for VCN v5.0.1

For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Add ip version check for smu_v13_0_12 functions

Add ip version check to use smu_v13_0_12 specific functions

Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: downgrade HDMI infoframe error to one time warning

In certain config, a modeprobe test triggers too many instances of the
error related to infoframe. Make it print only once, and also make it a
warning.

Fixes: 6027cbee1900 ("drm/amd/display: Add error check for avi and vendor infoframe setup function")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Chengjun Yao <Chengjun.Yao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add pasid debugfs entries

the entries will be appearing at
/sys/kernel/debug/kfd/proc/<pid>/pasid_<gpuid>.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove DRM_AMDGPU_NAVI3X_USERQ config for UQ

DRM_AMDGPU_NAVI3X_USERQ config support is not required for
usermode queue.

v2: rebase.

Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix NULL pointer dereference for program_lut_mode in dcn401_populate_mcm_luts

This commit introduces a NULL pointer check for
mpc->funcs->program_lut_mode in the dcn401_populate_mcm_luts function.
The previous implementation directly called program_lut_mode without
validating its existence, which could lead to a NULL pointer
dereference.

With this change, the function is now only invoked if
mpc->funcs->program_lut_mode is not NULL

Fixes the below:

drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c:720 dcn401_populate_mcm_luts()
error: we previously assumed 'mpc->funcs->program_lut_mode' could be null (see line 701)

drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn401/dcn401_hwseq.c
    642 void dcn401_populate_mcm_luts(struct dc *dc,
    643                 struct pipe_ctx *pipe_ctx,
    644                 struct dc_cm2_func_luts mcm_luts,
    645                 bool lut_bank_a)
    646 {
...
    716                 }
    717                 if (m_lut_params.pwl) {
    718                         if (mpc->funcs->mcm.populate_lut)
    719                                 mpc->funcs->mcm.populate_lut(mpc, m_lut_params, lut_bank_a, mpcc_id);
--> 720                         mpc->funcs->program_lut_mode(mpc, MCM_LUT_SHAPER, MCM_LUT_ENABLE, lut_bank_a, mpcc_id);

Cc: Yihan Zhu <yihanzhu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Yihan Zhu <yihanzhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Set SDMA_RLCx_IB_CNTL/SWITCH_INSIDE_IB

When submitting MQD to CP, set SDMA_RLCx_IB_CNTL/SWITCH_INSIDE_IB bit so
it'll allow SDMA preemption if there is a massive command buffer of
long-running SDMA commands.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add documentation associated with CSB

Add a description for the get_csb_buffer callback, update the glossary,
and add some extra information about RB, which is associated with CSB
configuration.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Use CSB helpers in gfx_v6_0_get_csb_buffer

Remove duplications from gfx_v6_0_get_csb_buffer by using CSB helpers.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Fix gfx_v7_0_get_csb_buffer to use rb_config

Instead of having the hardcoded values for the CSB buffer in
gfx_v7_0_get_csb_buffer, use the values calculated in previous steps by
accessing raster_config and raster_config_1.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set the evf name to identify the userq case

The evf fence name can clearly identify the userq usage.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix offset for HDP remap in nbio v7.11

APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Reset SMU v13.0.x custom settings

On SMU v13.0.2 and SMU v13.0.6 variants user may choose custom min/max
clocks in manual perf mode. Those custom min/max values need to be
reset once user switches to auto or restores default settings.
Otherwise, they may get used inadvertently during the next operation.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add the evf attached gem obj resv dump

This debug dump will help on debugging the evf attached gem obj fence
related issue.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fail DMABUF map of XGMI-accessible memory

If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.

Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Documentation/amdgpu: Add Ryzen AI Max 300 series processor

This has been announced so add to the table.

Link: https://www.amd.com/en/products/processors/laptop/ryzen/ai-300-series/amd-ryzen-ai-max-plus-395.html
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250422160740.3610-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Use CSB helpers in gfx_v7_0_get_csb_buffer

Use CSB helpers to remove code duplication from gfx_v7_0_get_csb_buffer.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Use CSB helpers in gfx_v8_0_get_csb_buffer

Remove code duplication from gfx_v8_0_get_csb_buffer by using CSB
helpers.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Use CSB helpers in gfx_v9_0_get_csb_buffer

Eliminate code duplication in gfx_v9_0_get_csb_buffer by using CSB
helpers.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Use CSB helpers in gfx_v10_0_get_csb_buffer

Remove duplicate code by using CSB helpers.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Use CSB helpers in gfx_v11_0_get_csb_buffer

Part of the code in gfx_v11_0_get_csb_buffer can be removed in favor of
some GFX CSB helpers. This commit removes the duplicated part for the
GFX 11 CSB function.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx: Introduce helpers handling CSB manipulation

From GFX6 to GFX11, there is a function for getting the CSB buffer to be
put into the hardware. Three common parts are duplicated in all of these
GFX functions:

1. Prepare the CSB preamble.
2. Parser the CS data.
3. End the CSB preamble.

This commit creates helpers to be used from GFX6 to GFX11.

Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix spelling mistake "rounter" -> "router"

There is a spelling mistake with the array utcl2_rounter_str, it
appears it should be utcl2_router_str. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/atom: Work around vbios NULL offset false positive

GCC really does not want to consider NULL (or near-NULL) addresses as
valid, so calculations based off of NULL end up getting range-tracked into
being an offset wthin a 0 byte array. It gets especially mad about this:

                if (vbios_str == NULL)
                        vbios_str += sizeof(BIOS_ATOM_PREFIX) - 1;
...
        if (vbios_str != NULL && *vbios_str == 0)
                vbios_str++;

It sees this as being "sizeof(BIOS_ATOM_PREFIX) - 1" byte offset from
NULL, when building with -Warray-bounds (and the coming
-fdiagnostic-details flag):

In function 'atom_get_vbios_pn',
    inlined from 'amdgpu_atom_parse' at drivers/gpu/drm/amd/amdgpu/atom.c:1553:2:
drivers/gpu/drm/amd/amdgpu/atom.c:1447:34: error: array subscript 0 is outside array bounds of 'unsigned char[0]' [-Werror=array-bounds=]
 1447 |         if (vbios_str != NULL && *vbios_str == 0)
      |                                  ^~~~~~~~~~
  'amdgpu_atom_parse': events 1-2
 1444 |                 if (vbios_str == NULL)
      |                    ^
      |                    |
      |                    (1) when the condition is evaluated to true
......
 1447 |         if (vbios_str != NULL && *vbios_str == 0)
      |                                  ~~~~~~~~~~
      |                                  |
      |                                  (2) out of array bounds here
In function 'amdgpu_atom_parse':
cc1: note: source object is likely at address zero

As there isn't a sane way to convince it otherwise, hide vbios_str from
GCC's optimizer to avoid the warning so we can get closer to enabling
-Warray-bounds globally.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix slab-use-after-free in hdcp

The HDCP code in amdgpu_dm_hdcp.c copies pointers to amdgpu_dm_connector
objects without incrementing the kref reference counts. When using a
USB-C dock, and the dock is unplugged, the corresponding
amdgpu_dm_connector objects are freed, creating dangling pointers in the
HDCP code. When the dock is plugged back, the dangling pointers are
dereferenced, resulting in a slab-use-after-free:

[   66.775837] BUG: KASAN: slab-use-after-free in event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.776171] Read of size 4 at addr ffff888127804120 by task kworker/0:1/10

[   66.776179] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.14.0-rc7-00180-g54505f727a38-dirty #233
[   66.776183] Hardware name: HP HP Pavilion Aero Laptop 13-be0xxx/8916, BIOS F.17 12/18/2024
[   66.776186] Workqueue: events event_property_validate [amdgpu]
[   66.776494] Call Trace:
[   66.776496]  <TASK>
[   66.776497]  dump_stack_lvl+0x70/0xa0
[   66.776504]  print_report+0x175/0x555
[   66.776507]  ? __virt_addr_valid+0x243/0x450
[   66.776510]  ? kasan_complete_mode_report_info+0x66/0x1c0
[   66.776515]  kasan_report+0xeb/0x1c0
[   66.776518]  ? event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.776819]  ? event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.777121]  __asan_report_load4_noabort+0x14/0x20
[   66.777124]  event_property_validate+0x42f/0x6c0 [amdgpu]
[   66.777342]  ? __lock_acquire+0x6b40/0x6b40
[   66.777347]  ? enable_assr+0x250/0x250 [amdgpu]
[   66.777571]  process_one_work+0x86b/0x1510
[   66.777575]  ? pwq_dec_nr_in_flight+0xcf0/0xcf0
[   66.777578]  ? assign_work+0x16b/0x280
[   66.777580]  ? lock_is_held_type+0xa3/0x130
[   66.777583]  worker_thread+0x5c0/0xfa0
[   66.777587]  ? process_one_work+0x1510/0x1510
[   66.777588]  kthread+0x3a2/0x840
[   66.777591]  ? kthread_is_per_cpu+0xd0/0xd0
[   66.777594]  ? trace_hardirqs_on+0x4f/0x60
[   66.777597]  ? _raw_spin_unlock_irq+0x27/0x60
[   66.777599]  ? calculate_sigpending+0x77/0xa0
[   66.777602]  ? kthread_is_per_cpu+0xd0/0xd0
[   66.777605]  ret_from_fork+0x40/0x90
[   66.777607]  ? kthread_is_per_cpu+0xd0/0xd0
[   66.777609]  ret_from_fork_asm+0x11/0x20
[   66.777614]  </TASK>

[   66.777643] Allocated by task 10:
[   66.777646]  kasan_save_stack+0x39/0x60
[   66.777649]  kasan_save_track+0x14/0x40
[   66.777652]  kasan_save_alloc_info+0x37/0x50
[   66.777655]  __kasan_kmalloc+0xbb/0xc0
[   66.777658]  __kmalloc_cache_noprof+0x1c8/0x4b0
[   66.777661]  dm_dp_add_mst_connector+0xdd/0x5c0 [amdgpu]
[   66.777880]  drm_dp_mst_port_add_connector+0x47e/0x770 [drm_display_helper]
[   66.777892]  drm_dp_send_link_address+0x1554/0x2bf0 [drm_display_helper]
[   66.777901]  drm_dp_check_and_send_link_address+0x187/0x1f0 [drm_display_helper]
[   66.777909]  drm_dp_mst_link_probe_work+0x2b8/0x410 [drm_display_helper]
[   66.777917]  process_one_work+0x86b/0x1510
[   66.777919]  worker_thread+0x5c0/0xfa0
[   66.777922]  kthread+0x3a2/0x840
[   66.777925]  ret_from_fork+0x40/0x90
[   66.777927]  ret_from_fork_asm+0x11/0x20

[   66.777932] Freed by task 1713:
[   66.777935]  kasan_save_stack+0x39/0x60
[   66.777938]  kasan_save_track+0x14/0x40
[   66.777940]  kasan_save_free_info+0x3b/0x60
[   66.777944]  __kasan_slab_free+0x52/0x70
[   66.777946]  kfree+0x13f/0x4b0
[   66.777949]  dm_dp_mst_connector_destroy+0xfa/0x150 [amdgpu]
[   66.778179]  drm_connector_free+0x7d/0xb0
[   66.778184]  drm_mode_object_put.part.0+0xee/0x160
[   66.778188]  drm_mode_object_put+0x37/0x50
[   66.778191]  drm_atomic_state_default_clear+0x220/0xd60
[   66.778194]  __drm_atomic_state_free+0x16e/0x2a0
[   66.778197]  drm_mode_atomic_ioctl+0x15ed/0x2ba0
[   66.778200]  drm_ioctl_kernel+0x17a/0x310
[   66.778203]  drm_ioctl+0x584/0xd10
[   66.778206]  amdgpu_drm_ioctl+0xd2/0x1c0 [amdgpu]
[   66.778375]  __x64_sys_ioctl+0x139/0x1a0
[   66.778378]  x64_sys_call+0xee7/0xfb0
[   66.778381]  do_syscall_64+0x87/0x140
[   66.778385]  entry_SYSCALL_64_after_hwframe+0x4b/0x53

Fix this by properly incrementing and decrementing the reference counts
when making and deleting copies of the amdgpu_dm_connector pointers.

(Mario: rebase on current code and update fixes tag)

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Fixes: da3fd7ac0bcf3 ("drm/amd/display: Update CP property based on HW query")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://lore.kernel.org/r/20250417215005.37964-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Disallow partition query during reset

Reject queries to get current partition modes during reset. Also, don't
accept sysfs interface requests to switch compute partition mode while
in reset.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix NULL pointer dereferences in dm_update_crtc_state() v2

Added checks for NULL values after retrieving drm_new_conn_state
to prevent dereferencing NULL pointers.

Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10751 dm_update_crtc_state()
warn: 'drm_new_conn_state' can also be NULL

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c
    10672 static int dm_update_crtc_state(struct amdgpu_display_manager *dm,
    10673                          struct drm_atomic_state *state,
    10674                          struct drm_crtc *crtc,
    10675                          struct drm_crtc_state *old_crtc_state,
    10676                          struct drm_crtc_state *new_crtc_state,
    10677                          bool enable,
    10678                          bool *lock_and_validation_needed)
    10679 {
    10680         struct dm_atomic_state *dm_state = NULL;
    10681         struct dm_crtc_state *dm_old_crtc_state, *dm_new_crtc_state;
    10682         struct dc_stream_state *new_stream;
    10683         int ret = 0;
    10684
    ...
    10703
    10704         /* TODO This hack should go away */
    10705         if (connector && enable) {
    10706                 /* Make sure fake sink is created in plug-in scenario */
    10707                 drm_new_conn_state = drm_atomic_get_new_connector_state(state,
    10708                                                                         connector);

drm_atomic_get_new_connector_state() can't return error pointers, only NULL.

    10709                 drm_old_conn_state = drm_atomic_get_old_connector_state(state,
    10710                                                                         connector);
    10711
    10712                 if (IS_ERR(drm_new_conn_state)) {
                                     ^^^^^^^^^^^^^^^^^^

    10713                         ret = PTR_ERR_OR_ZERO(drm_new_conn_state);

Calling PTR_ERR_OR_ZERO() doesn't make sense.  It can't be success.

    10714                         goto fail;
    10715                 }
    10716
    ...
    10748
    10749                 dm_new_crtc_state->abm_level = dm_new_conn_state->abm_level;
    10750
--> 10751                 ret = fill_hdr_info_packet(drm_new_conn_state,
                                                     ^^^^^^^^^^^^^^^^^^ Unchecked dereference

    10752                                            &new_stream->hdr_static_metadata);
    10753                 if (ret)
    10754                         goto fail;
    10755

v2: Modified the NULL pointer check for drm_new_conn_state in the
    dm_update_crtc_state function to  include a warning via WARN_ON and
    return -EINVAL to indicate an invalid state when the pointer is NULL.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update fence ptr with context:seqno

log context:seqno of the fence during timeout rather
than logging fence pointer.

Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx12: Add fw minimum version check for usermode queue

This patch is load usermode queue based on FW support for gfx12.
CP Ucode FW Vesion: [PFP = 2840, ME = 2780, MEC = 3050, MES = 123]

v2: Addressed review comments from Alex
   - Just check the firmware versions directly.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx11: Add fw minimum version check for usermode queue

This patch is load usermode queue based on FW support for gfx11.
CP Ucode FW version: [PFP = 2530, ME = 2390, MEC = 2600, MES = 120]

v2: Addressed review comments from Alex.
    - Just check the firmware versions directly.
v3: Firmware version checks only for Navi3x(by Alex).

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Shashank Sharma <shashank.sharma@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NULL pointer checks in dm_force_atomic_commit()

This commit updates the dm_force_atomic_commit function to replace the
usage of PTR_ERR_OR_ZERO with IS_ERR for checking error states after
retrieving the Connector (drm_atomic_get_connector_state), CRTC
(drm_atomic_get_crtc_state), and Plane (drm_atomic_get_plane_state)
states.

The function utilized PTR_ERR_OR_ZERO for error checking. However, this
approach is inappropriate in this context because the respective
functions do not return NULL; they return pointers that encode errors.

This change ensures that error pointers are properly checked using
IS_ERR before attempting to dereference.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>