patch 9.1.0140: cursor on wrong row after 1 char 'below' virtual text when EOL is shown
Problem: The cursor screen row was incorrectly being calculated when the
cursor follows a 1 character text_align 'below' virtual text line,
resulting in the cursor being shown on the wrong line.
This was caused by a cell size of 2 instead of 1 being used for the EOL
character, which propagated to the calculation of space for putting the
'below' virtual text on its own line. (rickhowe)
Solution: Fix the size used for the EOL character in calculating the
cursor's screen position (Dylan Thacker-Smith)
fixes: #11959
related: #12028
closes: #14096
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
- Normalise behaviour of :echo commands and improve expression matching.
- Allow continued argument lines.
- Refine string interpolation groups.
- Remove duplicated :menu and :map generated commands that are handled
specially later in the file.
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
* debversions.vim: Move lunar to unsupported release
* debsources: Add word boundaries around keyword match patterns
Co-authored-by: James Addison <jay@jp-hosting.net> Signed-off-by: James Addison <jay@jp-hosting.net> Signed-off-by: James McCoy <jamessan@jamessan.com> Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0139: MS-Windows: ligatures map cleared on startup
Problem: MS-Windows: ligatures map cleared on startup
Solution: Don't clear the ligatures_map, if the guiligatures
option has already been set (Erik S. V. Jansson)
If guiligatures is set from a .vimrc it's possible
that it will be cleared on start-up (e.g. in Win32
that's what happens).
So don't clear the ligatures map if gui_set_ligatures()
has already been called (e.g. after setting 'ligatures'
from .vimrc)
closes: #14094
Signed-off-by: Erik S. V. Jansson <caffeineviking@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
John Marriott [Mon, 26 Feb 2024 20:21:17 +0000 (21:21 +0100)]
patch 9.1.0138: too many STRLEN calls when getting a memline
Problem: too many STRLEN calls when getting a memline
Solution: Optimize calls to STRLEN(), add a few functions in memline.c
that return the byte length instead of relying on STRLEN()
(John Marriott)
closes: #14052
Signed-off-by: John Marriott <basilisk@internode.on.net> Signed-off-by: Christian Brabandt <cb@256bit.org>
- Differentiate between :substitute and substitute(), fixes #13883.
- Match all allowed :substitute delimiters.
- Remove leading context from :substitute matches.
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0134: CI: Test_term_gettitle() is flaky on MacOS 14
Problem: Test_term_gettitle() is flaky on MacOS 14 and Github runners
Solution: Skip the test on Github CI
closes: #14085
It fails with this: '^\\[No Name\\] - VIM\\d*$' does not match 'e] - VIM'
It is not clear why term_gettitle() only get's the last part of the
expected title (perhaps there is a Carriage return in there or the
terminal window is too small?)
patch 9.1.0133: MS-Windows: ligatures not rendering correctly
Problem: font ligatures don't render correctly in the Win32 GUI-version
of gvim even when set rop=type:directx is used. Setting
guiligatures also doesn't make any difference. This leads to
broken font ligatures when the cursor passes through them. It
does not recover from this, and they remain broken until you
re-render the whole buffer (e.g. by using Ctrl+L).
Solution: the problem is that we only re-draw the current and previous
character in gui_undraw_cursor() and only have the special case
for GTK when it comes to rendering ligatures. So let's enable
gui_adjust_undraw_cursor_for_ligatures() to also happen for
Win32 GUI if guiligatures is setup correctly (all this does is
expand the range of gui_undraw_cursor() with ligature characters).
related: #9181
related: #12901
closes: #14084
Signed-off-by: Erik S. V. Jansson <caffeineviking@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Sat, 24 Feb 2024 13:21:39 +0000 (14:21 +0100)]
patch 9.1.0132: "C" doesn't include composing chars with 'virtualedit'
Problem: using "C" and 've=all' set, doesn't include composing chars
when changing a line, keeps the composing chars for whatever
is typed afterwards.
Solution: Use mb_head_off() and mb_ptr2len() instead of mb_tail_off().
(zeertzjq)
closes: #14083
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0131: buffer-completion may not always find all matches
Problem: buffer-completion code too complicated and does not always
find all matches (irisjae)
Solution: do not try to anchor pattern to beginning of line or
directory-separator, always return all matches
Note: we are considering the non-fuzzy buffer-matching here.
Currently, the buffer-completion code makes 2 attempts to match a
pattern against the list of available patterns. First try is to match
the pattern and anchor it to either the beginning of the file name or
at a directory-separator (// or \\).
When a match is found, Vim returns the matching buffers and does not try
to find a match anywhere within a buffer name. So if you have opened two
buffers like /tmp/Foobar.c and /tmp/MyFoobar.c using `:b Foo` will only
complete to the first filename, but not the second (the same happens
with `getcompletion('Foo', 'buffer')`).
It may make sense, that completion priorities buffer names at directory
boundaries, but it inconsistent, may cause confusion why a certain
buffer name is not completed when typing `:b Foo<C-D>` which returns
only a single file name and then pressing Enter (to switch to that
buffer), Vim will error with 'E93: More than one match for Foo').
Similar things may happen when wiping the /tmp/Foobar.c pattern and
afterwards the completion starts completing other buffers.
So let's simplify the code and always match the pattern anywhere in the
buffer name, do not try to favor matches at directory boundaries. This
is also simplifies the code a bit, we do not need to run over the list
of buffers several times, but only twice.
Sean Dewar [Sat, 24 Feb 2024 09:20:24 +0000 (10:20 +0100)]
patch 9.1.0130: [security]: UAF if win_split_ins autocommands delete "wp"
Problem: heap-use-after-free in win_splitmove if Enter/Leave
autocommands from win_split_ins immediately closes "wp".
Solution: check that "wp" is valid after win_split_ins.
(Sean Dewar)
closes: #14078
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0129: Fix truncation of text_wrap 'wrap' virt text after EOL list char
Problem: Virtual text with text_wrap 'wrap' was effectively being
truncated by a break conditional on the EOL list character
being added to the screen line. (BigPeet)
Solution: Remove the condition that was leading to the early break and
instead fix a similar but incorrectly written outer condition
that checks if there is more to add at the end of the screen
line. (Dylan Thacker-Smith)
Also, related:
- update comment in win_line()
- remove no longer necessary at_end_str variable in win_line()
Petr Pisar [Thu, 22 Feb 2024 19:39:09 +0000 (20:39 +0100)]
runtime(spec): Recognize SourceLicense tag name in RPM spec syntax (#14046)
rpm-4.19.0 added a new SourceLicense tag. It is used at the same place
as License tag.
This patch adds the new tag name into a Vim syntax file to be
highligted the same way as the License tag. Note that it has to be
defined in the syntax file before Source\d* regexp. Otherwise it's not
recognized by Vim.
Signed-off-by: Petr Písař <ppisar@redhat.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Sean Dewar [Thu, 22 Feb 2024 18:53:33 +0000 (19:53 +0100)]
patch 9.1.0128: win_gotoid() may abort even when not switching a window
Problem: win_gotoid() checks for textlock and other things when switching
to a window that is already current (after v9.1.0119)
Solution: return early with success when attempting to switch to curwin
(Sean Dewar)
Other potential causes of E565 from win_gotoid after v9.1.0119 should be
correct. Plugins can consider using win_execute() instead if they wish to
temporarily switch windows during textlock.
fixes: #14073
closes: #14074
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Thu, 22 Feb 2024 18:51:34 +0000 (19:51 +0100)]
patch 9.1.0127: Naming a non-pointer variable "oap" is strange
Problem: Naming a non-pointer variable "oap" is strange.
Solution: Rename it to "oa". Also prevent using freed memory in case of
memory allocation failure. (zeertzjq)
closes: #14075
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0125: unused init of text_prop_idxs in win_line()
Problem: unused init of text_prop_idxs in win_line
Solution: Remove it, fix typo
(Dylan Thacker-Smith)
Later use of text_prop_idxs treats it as empty, incrementing
text_props_active as new elements are added to this array, so remove
this unused conditional initialization when text_props_active is 0.
closes: #14063
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0124: display of below/right virtual text with non-virtual text overlap
Problem: Virtual text with text_align 'right'/'below' wasn't being
used when a non-virtual text property overlaps with the end of
the line. This was because the non-virtual text property had a
higher priority, preventing the virtual text from being used.
Solution: Fix the sorting of text properties so virtual text properties
have a higher priority than non-virtual text properties.
(Dylan Thacker-Smith)
related: #14063
Signed-off-by: Dylan Thacker-Smith <dylan.ah.smith@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
GuyBrush [Wed, 21 Feb 2024 19:16:38 +0000 (20:16 +0100)]
patch 9.1.0123: MS-Windows: system() may deadlock
Problem: MS-Windows: system() may deadlock when calling binaries that
expect stdin
Solution: Ignore the SHELL_EXPAND flag
(GuyBrush)
This happens on binaries that expect stdin. For example:
:echo system("xxd")
will cause a deadlock.
SHELL_EXPAND is a flag devoted to support the linux implementation of
the backtick-expansion mechanism.
On linux backtic-expansion relies in the function mch_expand_wildchars()
(os_unix.c) that delegates on each specific shell (bash, sh, csh, zsh)
the expansion. Basically it composes a shell command that does the
expansion and redirects the output to a file and call_shell() it. On
windows backtick-expansion is performed by Vim itself.
On linux SHELL_EXPAND modifies how mch_call_shell_fork() (os_unix.c)
works. This function:
- relies on posix fork() to spawn a child process to execute a
external command.
- Child and parent process communicate using pipes (or pseudoterminal
if available).
User input (type ahead content) is processed in a loop only if
!(SHELL_EXPAND || SHELL_COOKED).
Though signals are used to detect Ctrl-C in all cases (the input
loop is not necessary to interrupt the function).
In the backtick-expansion the external command is the shell command
that provides the expansion. For the child redirection:
- SHELL_EXPAND replaces stdin, stdout & stderr to /dev/null. This is
why the shell command composed includes redirection (otherwise
output would be lost).
- !SHELL_EXPAND replaces stdin, stdout & stderr with the parent
created pipes (or pseudoterminal).
Note that the use of SIGINT signal prevents mch_call_shell_fork()
from hanging vim.
On Windows mch_system_piped() (os_win32.c) (which is only used when the
GUI is running) mimics mch_call_shell_fork() (os_unix.c).
Win32 lacks fork() and relies on CreateProcessW() and only has pipe
support (not pseudoterminal) which makes the implementation much
different.
But, the key idea is that windows lacks signals, the OS provides support
for console apps but gvim is not one. The only way of detecting a Ctrl-C
is actually processing user input (type ahead content). By ignoring the
user input under SHELL_EXPAND the function can hang gvim.
Ignoring SHELL_EXPAND flag has no consequence in Windows because as
mentioned above it is only meaningful in linux.
closes: #13988
Signed-off-by: GuyBrush <miguel.barro@live.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Maxim Kim [Wed, 21 Feb 2024 18:48:37 +0000 (19:48 +0100)]
patch 9.1.0122: Some minor issues with the getregion() function
Problem: Some minor issues with the getregion() function
Solution: Fix examples in the help, use OP_NOP op_type and MBLOCK
as motion_type in f_getreg(), update vim syntax to
for getregion() (Maxim Kim)
```
:xnoremap <CR>
\ <Cmd>echow getregion('v', '.', mode())<CR>
```
`echo` while in visual mode has no visible effect, thus people trying
example might be frustrated as it looks like nothing happens.
So the option is to change it to `echow` or `echom`.
With `echom` it is again has no visible effect but one can at least inspect `:messages`.
On the other hand `echow` showes selected text in a popup window.
```
Can also be used as a |method|: >
'.'->getregion("'a', 'v')
```
Here is the typo, which makes example invalid, should be `("'a", ...`
closes: #14064
Signed-off-by: Maxim Kim <habamax@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Sean Dewar [Wed, 21 Feb 2024 18:40:44 +0000 (19:40 +0100)]
patch 9.1.0121: Infinite loop or signed overflow with 'smoothscroll'
Problem: infinite loop in win_update with 'smoothscroll' set when
window width is equal to textoff, or signed integer overflow
if smaller.
Solution: don't revalidate wp->w_skipcol in that case, as no buffer text
is being shown. (Sean Dewar)
Don't instead reset w_skipcol; that would lose the scroll position
within the line, which may be undesirable if the window is made wider
later.
Also include changes from the splitmove PR #14042 that I (in my infinite
Git wisdom) forgot to commit. This includes a change to
Test_window_split_no_room to ensure it doesn't fail for some screen
sizes.
Move Test_smoothscroll_in_zero_width_window to test_scroll_opt.vim, as
that file feels more appropriate.
closes: #14068
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Sean Dewar [Tue, 20 Feb 2024 21:05:10 +0000 (22:05 +0100)]
patch 9.1.0119: can move away from cmdwin using win_splitmove()
Problem: can switch windows while textlocked via f_win_gotoid and
f_win_splitmove (which also allows switching in the cmdwin).
Solution: Check text_or_buf_locked in f_win_splitmove()
(Sean Dewar)
While at it, call text_or_buf_locked() in f_win_gotoid() instead of
testing for cmdwin_type() (which text_buf_locked() does and
in addition will also verify that the buffer is not locked).
closes: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Sean Dewar [Tue, 20 Feb 2024 21:00:33 +0000 (22:00 +0100)]
patch 9.1.0118: Use different restoration strategy in win_splitmove
Problem: saving and restoring all frames to split-move is overkill now
that WinNewPre is not fired when split-moving.
Solution: defer the flattening of frames until win_split_ins begins
reorganising them, and attempt to restore the layout by
undoing our changes. (Sean Dewar)
This also means we no longer must allocate.
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Sean Dewar [Tue, 20 Feb 2024 20:52:31 +0000 (21:52 +0100)]
patch 9.1.0117: Stop split-moving from firing WinNew and WinNewPre autocommands
Problem: win_splitmove fires WinNewPre and possibly WinNew when moving
windows, even though no new windows are created.
Solution: don't fire WinNew and WinNewPre when inserting an existing
window, even if it isn't the current window. Improve the
accuracy of related documentation. (Sean Dewar)
Likewise, before this patch, WinClosed was not fired anyway (even for :wincmd
H/J/K/L, which also didn't fire WinNew, but did still fire WinNewPre), despite
documentation saying windows are "closed". Note that :wincmd T actually indeed
works by creating a new window (and closing the old one), unlike the others.
This also fixes issues where WinNewPre is fired when split-moving while curwin
doesn't yet have a frame or entry in the window list, causing many things to not
work (it's not considered valid at that point). This was guaranteed when using
:wincmd H/J/K/L.
Because WinNewPre is no longer fired when split-moving, this makes restoring the
previous window layout on failure easier, as we can be sure that frames are not
resized from WinNewPre autocommands if win_split_ins fails. This allows us to
use a different strategy in the following commit.
--
In my opinion, this leaves questions about the current usefulness of WinNewPre.
A motivation described in #10635 states how creating a new window can steal room
from other windows, and how WinNewPre will be useful for detecting that, but
this is also true when inserting an existing window, which now doesn't fire it.
Maybe the autocommand should be changed to have a better name?
There are also other issues I found with the current implementation of WinNewPre
that need addressing:
- it allows switching windows and tabpages, which can cause incorrect windows to
be split/moved, and big problems when switching tabpages.
- it fires before win_split_ins checks for room, before it makes any changes to
window sizes or before it considers allocating a new window. This should be
changed or documented.
I hope to address some of this stuff in a different PR, if possible.
related: #14038
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Sean Dewar [Tue, 20 Feb 2024 19:28:15 +0000 (20:28 +0100)]
patch 9.1.0116: win_split_ins may not check available room
Problem: win_split_ins has no check for E36 when moving an existing
window
Solution: check for room and fix the issues in f_win_splitmove()
(Sean Dewar)
win_split_ins has no check for E36 when moving an existing window,
allowing for layouts with many overlapping zero-sized windows to be
created (which may also cause drawing issues with tablines and such).
f_win_splitmove also has some bugs.
So check for room and fix the issues in f_win_splitmove. Handle failure
in the two relevant win_split_ins callers by restoring the original
layout, and factor the common logic into win_splitmove.
Don't check for room when opening an autocommand window, as it's a
temporary window that's rarely interacted with or drawn anyhow, and is
rather important for some autocommands.
Issues fixed in f_win_splitmove:
- Error if splitting is disallowed.
- Fix heap-use-after-frees if autocommands fired from switching to "targetwin"
close "wp" or "oldwin".
- Fix splitting the wrong window if autocommands fired from switching to
"targetwin" switch to a different window.
- Ensure -1 is returned for all errors.
Also handle allocation failure a bit earlier in make_snapshot (callers,
except win_splitmove, don't really care if a snapshot can't be made, so
just ignore the return value).
Note: Test_smoothscroll_in_zero_width_window failed after these changes with
E36, as it was using the previous behaviour to create a zero-width window.
I've fixed the test such that it fails with UBSAN as expected when v9.0.1367 is
reverted (and simplified it too).
related: #14042
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
dkearns [Mon, 19 Feb 2024 19:58:30 +0000 (06:58 +1100)]
runtime(filetype): Modula-2 files with priority not detected (#14055)
Problem: Modula-2 files with a specified priority are not detected.
Solution: Match the priority syntax in module header lines when
performing heuristic content detection.
Disable the :defcompile debug line. This was accidentally left enabled
in commit 68a8947.
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Aliaksei Budavei [Sun, 18 Feb 2024 18:02:14 +0000 (21:02 +0300)]
runtime(vim): Distinguish Vim9 constructor definitions from the :new ex command (#14050)
With the arrival of Vim9 classes, the syntax must allow for
_new_ constructors; multiple constructor definitions are
supported for a class, provided distinct suffix-names are
used. Currently, the defined constructors match either
vimCommand or vimFunctionError (for any newBar).
For example:
------------------------------------------------------------
vim9script
Since every constructor is required to bear a lower-cased
_new_ prefix name, it should suffice to distinguish them
from functions, and so there are no new highlight or syntax
groups introduced.
zeertzjq [Sun, 18 Feb 2024 17:53:08 +0000 (18:53 +0100)]
patch 9.1.0115: Using freed memory with full tag stack and user data
Problem: Using freed memory with full tag stack and user data
(Konstantin Khlebnikov)
Solution: Clear the user data pointer of the newest entry.
(zeertzjq, Konstantin Khlebnikov)
fixes: neovim/neovim#27498
closes: #14053
Co-authored-by: Konstantin Khlebnikov koct9i@gmail.com Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Konstantin Khlebnikov koct9i@gmail.com Signed-off-by: Christian Brabandt <cb@256bit.org>
runtime(less): reset readonly setting when disabling less mode
While at it, also do the unmap only if a specific key has been mapped.
There are some keys that are only selectively mapped and it would cause
an error if we are trying to unmap such a key (e.g. z when your
foldmethod is not manual).
patch 9.1.0112: Remove undo information, when cleaning quickfix buffer
Problem: When the quickfix buffer has been modified an autocommand
may invalidate the undo stack (kawarimidoll)
Solution: When clearing the quickfix buffer, also wipe the undo stack
Brandon Maier [Wed, 14 Feb 2024 23:16:02 +0000 (00:16 +0100)]
patch 9.1.0111: filetype: no support for bats files
The '*.bats' file type is for Bash Automated Testing System (BATS)
scripts. BATS scripts are Bash with a special '@test' extension but they
otherwise work with Vim's bash filetype.
See https://github.com/bats-core/bats-core
closes: #14039
Signed-off-by: Brandon Maier <brandon.maier@collins.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
The 'Config.in' file type is for Buildroot configuration files.
Buildroot Config.in files use the same Kconfig backend as the Linux
kernel's Kconfig files.
Buildroot also has other filename variants that follow "Config.in.*",
they are used to distinguish multiple Config.in files in the same
directory.
See https://buildroot.org/downloads/manual/manual.html#_literal_config_in_literal_file
closes: #14038
Signed-off-by: Brandon Maier <brandon.maier@collins.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Doug Kearns [Wed, 14 Feb 2024 20:28:44 +0000 (21:28 +0100)]
runtime(vim): Update base-syntax, remove unused vimString region
These were included with the initial release of the syntax file for Vim
5 and were probably intended to allow for syn-region start/skip/end
patterns with a '!' or '+' delimiter. However, these cases are
currently handled by the vimSynRegPat group.
The removed patterns never match anywhere in the distributed runtime
files and it is believed that this is generally true.
closes: #14035
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
h-east [Wed, 14 Feb 2024 20:00:01 +0000 (21:00 +0100)]
runtime(vim): update Vim Syntax generator
- Add missing "Last Change:" line.
- The date on this line in vim.vim is updated by update_date.vim at
Make time. (I made a mistake in the file path)
- Remove unnecessary "b:loaded_syntax_vim_ex".
- Remove "Base File Date:" line in vim.vim.base
- Add Doug Kearns as Maintainer
closes: #14031
Signed-off-by: h-east <h.east.727@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI: Fix MacOS-14 tests (after 9.1.0070)
Solution: Re-enable sound tests by granting Mic access,
disable Test_diff_screen because of buggy MacOS diff
(non GNU version), re-enable Test_term_gettitle()
(Yee Cheng Chin)
macos-14 runner was turned on in #13943, but it had to turn off a few
tests in order for CI to run. Re-enable them and fix the underlying
issues.
* `Test_diff_screen`: The test failure is due to a bug in Apple's diff
utility. Apple introduced a new diff tool based on FreeBSD in macOS 13
and it has buggy behaviors when using unified diff (`-U0`) and the
diff is on the first line of the file. Simply disable this test for
now if we detect Apple diff (instead of the old GNU diff). Can
re-enable this in the future if Apple fixes the issue.
* `Test_play_event` / `Test_play_silent`: GitHub Actions currently has
an issue with playing sound in CI in macos-14 runners. It for some
reason triggers a microphone permission dialog popup which blocks the
CI action (see https://github.com/actions/runner-images/issues/9330).
To fix this, add a temporary step in macos-14 to manually allow
microphone permissions in the runner.
* `Test_term_gettitle`: I could not reproduce the failure, so I just
turned it on and it seems to run just fine. Maybe it's a timing issue
and whatnot but either way that should be fixed when we can reproduce
the issue.
closes: #14032
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Maxim Kim [Wed, 14 Feb 2024 19:28:17 +0000 (20:28 +0100)]
patch 9.1.0106: Visual highlight hard to read with 'termguicolors'
Problem: Visual highlight hard to read with 'termguicolors'
(Maxim Kim)
Solution: Set Visual GUI foreground to black (with background=light)
and lightgrey (with background=dark)
(Maxim Kim)
fixes: #14024
closes: #14025
Signed-off-by: Maxim Kim <habamax@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
glepnir [Mon, 12 Feb 2024 21:14:53 +0000 (22:14 +0100)]
patch 9.1.0101: upper-case of German sharp s should be U+1E9E
Problem: upper-case of ß should be U+1E9E (CAPITAL LETTER SHARP S)
(fenuks)
Solution: Make gU, ~ and g~ convert the U+00DF LATIN SMALL LETTER SHARP S (ß)
to U+1E9E LATIN CAPITAL LETTER SHARP S (ẞ), update tests
(glepnir)
This is part of Unicode 5.1.0 from April 2008, so should be fairly safe
to use now and since 2017 is part of the German standard orthography,
according to Wikipedia:
https://en.wikipedia.org/wiki/Capital_%E1%BA%9E#cite_note-auto-12
There is however one exception: UnicodeData.txt for U+00DF
LATIN SMALL LETTER SHARP S does NOT define U+1E9E LATIN CAPITAL LETTER
SHARP S as its upper case version. Therefore, toupper() won't be able
to convert from lower sharp s to upper case sharp s (the other way
around however works, since U+00DF is considered the lower case
character of U+1E9E and therefore tolower() works correctly for the
upper case version).
fixes: #5573
closes: #14018
Signed-off-by: glepnir <glephunter@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Mon, 12 Feb 2024 19:28:01 +0000 (20:28 +0100)]
patch 9.1.0100: Redrawing can be improved with undo and 'spell'
Problem: When undoing with 'spell', redrawWinline() is called after
changed_lines(), while later win_update() sets redraw type to
UPD_NOT_VALID, even though w_redraw_top and w_redraw_bot are
still valid.
Solution: Only set redraw type to UPD_NOT_VALID when inserting/deleting
lines after parts of window has pending redraw, i.e., when
changed_lines() is called after redrawWinline().
(zeertzjq)
closes: #14019
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0099: Not able to use diff() with 'diffexpr'
Problem: Not able to use diff() with 'diffexpr'
(rickhowe, after v9.1.0096)
Solution: Use a default context length of 0, update diff() help text,
add a test for using diff() with 'diffexpr'
(Yegappan Lakshmanan)
closes: #14013
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
runtime(gpg): Mark dangerous use-embedded-filename with WarningMsg
The syntax highlighter is likely to encourage people to use the listed
commands.
But `use-embedded-filename` is a dangerous option that can cause GnuPG
to write arbitrary data to arbitrary files whenever GnuPG encounters
malicious data.
GnuPG upstream explicitly warns against using this option:
However, since this is a valid option, we cannot just drop it from the
syntax script. Instead, let's mark it with the WarningMsg highlighting
to make it obvious, that this option is different (and should not be
used for security reasons).
closes: #13961
Co-authored-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net> Signed-off-by: Christian Brabandt <cb@256bit.org>
glepnir [Sun, 11 Feb 2024 16:52:40 +0000 (17:52 +0100)]
patch 9.1.0098: CompletionChanged not triggered when new leader added without matches
Problem: CompletionChanged not triggered when new leader added causing
no matching item in the completion menu
Solution: When completion is active but no items matched still trigger
CompletChanged event
(glepnir)
closes: #13982
Signed-off-by: glepnir <glephunter@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Sun, 11 Feb 2024 16:16:19 +0000 (17:16 +0100)]
patch 9.1.0097: 'breakindent' behaves inconsistently with 'list' and splits
Problem: 'breakindent' behaves inconsistently with 'list' and splits.
Solution: Use 'listchars' from the correct window and handle caching
properly. Move cheaper comparisons to the top.
(zeertzjq)
closes: #14008
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
dkearns [Sun, 11 Feb 2024 16:13:34 +0000 (03:13 +1100)]
runtime(vim): Update syntax file (#14009)
- allow comments after :highight commands
- match the bang in a :highlight[!] command
- highlight the bang in :map[!], :menu[!] and :unlet[!] with vimOper
like all other commands
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: diff() function uses 'diffexpr'
(rickhowe)
Solution: Make diff() always use internal diff(), add support for
unified diff context length, sort diff() options in help
(Yegappan Lakshmanan)
fixes: #13989
closes: #14010
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0094: xxd: buffer-overflow when writing color output
Problem: xxd: buffer-overflow when writing color output
Solution: properly account for the color escape sequences and
adjust LLEN macro
(Goffredo Baroncelli)
xxd: crash with higer number of column
xxd writes the data into a buffer before printing. Unfortunately
the buffer doesn't consider the space consumed by the escape
sequences used to change the color of the character.
zeertzjq [Sat, 10 Feb 2024 12:24:03 +0000 (13:24 +0100)]
patch 9.1.0093: Still a qsort() comparison function that returns result of subtraction
Problem: Still a qsort() comparison function fuzzy_match_item_compare()
that returns result of subtraction (after 9.1.0089).
Solution: Use an explicit comparison instead of subtraction.
(zeertzjq)
closes: #14004
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0091: Syntax test fails when run with non C locale
Problem: Syntax test fails when run with non C locale
Solution: Run syntax tests with C locale, clean up Xtestscript file,
strip environment variables from GetVimCommand()
(h-east)
closes: #14007
Co-authored-by: h-east <h.east.727@gmail.com> Signed-off-by: h-east <h.east.727@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0089: qsort() comparison functions should be transitive
Problem: qsort() comparison functions should be transitive
Solution: Do not subtract values, but rather use explicit comparisons
Improve qsort() comparison functions
There has been a recent report on qsort() causing out-of-bounds read &
write in glibc for non transitive comparison functions
https://www.qualys.com/2024/01/30/qsort.txt
Even so the bug is in glibc's implementation of the qsort() algorithm,
it's bad style to just use substraction for the comparison functions,
which may cause overflow issues and as hinted at in OpenBSD's manual
page for qsort(): "It is almost always an error to use subtraction to
compute the return value of the comparison function."
So check the qsort() comparison functions and change them to be safe.
patch 9.1.0088: TextChanged not triggered for :norm! commands
Problem: TextChanged not triggered for :norm! commands
(machakann, after v9.0.2031)
Solution: Only reset curbuf->b_last_changedtick if TextChangedI
was triggered in insert mode (and not blocked)
Note: for unknown reasons, the test fails on Windows (but seems to work
fine when running interactively)
glepnir [Fri, 9 Feb 2024 18:30:26 +0000 (19:30 +0100)]
patch 9.1.0087: Restoring lastused_tabpage too early in do_arg_all()
Problem: Restore lastused_tabpage too early in do_arg_all() function it
will change later in the function.
Solution: Restore lastused_tabpage a bit later, when being done with
tabpages (glepnir)
closes: #13992
Signed-off-by: glepnir <glephunter@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
lilydjwg [Fri, 9 Feb 2024 18:24:23 +0000 (19:24 +0100)]
patch 9.1.0086: Problem when scrolling using slow touchpads scroll event
Problem: Problem when scrolling using slow touchpads scroll event
Solution: better ways to determine if a smooth scroll has ended (when
available) (lilydjwg)
related: #13997
Signed-off-by: lilydjwg <lilydjwg@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
lilydjwg [Fri, 9 Feb 2024 18:13:12 +0000 (19:13 +0100)]
patch 9.1.0085: X11 scroll size changes after accessing clipboard
Problem: X11 scroll size changes after accessing clipboard
(Ernie Rael)
Solution: use GDK_SCROLL_MASK for X11 and GDK_SMOOTH_SCROLL_MASK for
Wayland (lilydjwg)
because GDK_SCROLL_SMOOTH events don't work well for x11 (see comments).
fixes #13994
closes: #13997
Signed-off-by: lilydjwg <lilydjwg@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Thu, 8 Feb 2024 10:37:40 +0000 (11:37 +0100)]
patch 9.1.0083: Redrawing can be improved when deleting lines with 'number'
Problem: Redrawing can be improved when inserting/deleting lines with 'number'.
Solution: Only redraw the number column of lines below changed lines.
Add a test as this wasn't previously tested.
(zeertzjq)
closes: #13985
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Thu, 8 Feb 2024 10:34:55 +0000 (11:34 +0100)]
patch 9.1.0082: Redrawing can be improved when deleting lines with 'cursorline'
Problem: Redrawing can be improved when deleting lines with 'cursorline'.
Solution: Use smarter invalidation and adjustment. Remove unnecessary
UPD_VALID as it is already set at the top of the loop. Make
the test for #4862 fail without the fix.
(zeertzjq)
closes: #13986
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
I don't know why, but with GDK_SMOOTH_SCROLL_MASK we get wheel events as
GDK_SCROLL_SMOOTH. What's more, one wheel scroll is counted as 1.5
distance in Wayland but 1.0 in X11.
I failed to find any docs on gtk.org about this.
fixes: #13987
closes: #13991
Signed-off-by: lilydjwg <lilydjwg@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
qeatzy [Wed, 7 Feb 2024 16:52:25 +0000 (17:52 +0100)]
runtime(doc): Clarify list-concatenation a bit more
Make doc list-concatenation more clear as for += and extend().
1. describe `+=` for list-concatenation more accurately
2. add `extend()` example for list-concatenation
3. Fix CI errors for missing helptags reference |+=|
closes: #13983
Signed-off-by: qeatzy <qeatzy@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0080: unexpected error for modifying final list using +=
Problem: unexpected error for modifying final list using += operator
(Ernie Rael)
Solution: Allow List value modification of a final variable using +=
operator
(Yegappan Lakshmanan)
fixes: #13745
fixes: #13959
closes: #13962
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Added a syntax region for command blocks so that the highlighting of
`::` comments in them can be controlled. The `dosbatch_colons_comment`
variable now controls if all `::` comments in a code block are
highlighted as comments or errors. A `::` comment at the end of a
command block is always highlighted as an error.
This re-enables the highlighting of `::` comments in `.bat` files as
requested in #13666, while allowing control of highlighting them in
command blocks requested in #11778 and first attempted in #11980.
related: #11980
fixes: #13666
Co-authored-by: Mike Williams <mikew@globalgraphics.com> Signed-off-by: Mike Williams <mikew@globalgraphics.com> Signed-off-by: mevanlc <mevanlc@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
projects / thirdparty / vim.git / log
