Ben Elliston [Wed, 21 Dec 2005 00:43:21 +0000 (11:43 +1100)]
configure.ac: Enable C extension for decimal float if invoked with --enable-decimal-float.
* configure.ac: Enable C extension for decimal float if invoked
with --enable-decimal-float.
* doc/install.texi (Configuration): Document it.
* configure, config.in: Regenerate.
* cfganal.c (flow_reverse_top_sort_order_compute):
Renamed to post_order_compute and additional parameter added which
allows the inclusion of entry and exit blocks into list.
(mark_dfs_back_edges): Fixed comment.
(flow_depth_first_order_compute): Renamed to
pre_and_rev_post_order_compute additional parameter added which
allows the inclusion of entry and exit blocks into list.
* global.c (set_up_bb_rts_numbers): Call to
flow_reverse_top_sort_order_compute renamed to
post_order_compute.
* var-tracking.c (vt_stack_adjustments): Fixed comment.
(vt_find_locations): Call to
flow_depth_first_order_compute renamed to
pre_and_rev_post_order_compute.
* cfgloop.c (flow_find_loops): Ditto.
* tree-ssa-reassoc.c (init_reassoc): Ditto.
* df.c (df_analyze_1, df_analyze_subcfg): Calls to
flow_reverse_top_sort_order_compute renamed to post_order_compute
and calls to flow_reverse_top_sort_order_compute renamed to
post_order_compute.
* basic_block.h: Ditto.
Paolo Bonzini [Tue, 20 Dec 2005 17:19:18 +0000 (17:19 +0000)]
Revert Ada-related part of the previous change.
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Roger Sayle [Tue, 20 Dec 2005 17:06:14 +0000 (17:06 +0000)]
re PR rtl-optimization/25115 (Segmentation fault in pre_insert_copy_insn)
2005-12-20 Roger Sayle <roger@eyesopen.com>
Paolo Bonzini <bonzini@gnu.org>
PR rtl-optimization/25115
* gcse.c (pre_insert_copy_insn): Fall back to the sole
SET in the insn if there is no SET for an
expression that is equivalent to EXPR.
Co-Authored-By: Paolo Bonzini <bonzini@gnu.org>
From-SVN: r108855
Richard Guenther [Tue, 20 Dec 2005 16:20:27 +0000 (16:20 +0000)]
re PR middle-end/24306 (va_arg gets confused when skipping over certain zero-sized types with -msse)
2005-12-20 Richard Guenther <rguenther@suse.de>
PR middle-end/24306
* builtins.c (std_gimplify_va_arg_expr): Do not align
va frame for zero sized types.
* config/i386/i386.c (ix86_gimplify_va_arg): Likewise.
Kazu Hirata [Tue, 20 Dec 2005 14:47:07 +0000 (14:47 +0000)]
re PR tree-optimization/25501 (Segfault)
gcc/
PR tree-optimization/25501
* tree-cfgcleanup.c (merge_phi_nodes): Check that RESULT is
used in the PHI argument corresponding to the edge from BB to
DEST.
Mark Mitchell [Tue, 20 Dec 2005 04:59:42 +0000 (04:59 +0000)]
re PR c++/24278 (ICE while trying to print out error)
PR c++/24278
* init.c (expand_member_init): Print messages about baseclasses
using %T rather than %D.
PR c++/24278
* g++.dg/template/ctor5.C: New test.
Mark Mitchell [Tue, 20 Dec 2005 04:44:20 +0000 (04:44 +0000)]
re PR c++/24915 (Overload errors generated without template instantiations for class member templates)
PR c++/24915
* class.c (add_method): Do not treat templates as identical unless
their return types are the same.
PR c++/24915
* g++.dg/template/overload8.C: New test.
Paolo Carlini [Tue, 20 Dec 2005 00:29:18 +0000 (00:29 +0000)]
stl_deque.h (deque<>::resize, [...]): Avoid troubles with ADL, user defined operators and _Deque_iterator.
2005-12-19 Paolo Carlini <pcarlini@suse.de>
* include/bits/stl_deque.h (deque<>::resize, _M_fill_assign):
Avoid troubles with ADL, user defined operators and _Deque_iterator.
(operator-(const _Deque_iterator<>&, const _Deque_iterator<>&):
Add overload for left and right iterators of the same type.
* include/bits/deque.tcc (erase(iterator)): Avoid troubles with ADL,
user defined operators and _Deque_iterator.
* testsuite/23_containers/deque/types/1.cc: Add.
* include/bits/deque.tcc (_M_insert_aux(iterator, size_type,
const value_type&)): Qualify with std:: fill call.
Zdenek Dvorak [Mon, 19 Dec 2005 20:10:11 +0000 (21:10 +0100)]
re PR tree-optimization/24793 (ICE: expected ssa_name, have var_decl in verify_ssa, at tree-ssa.c:746)
PR tree-optimization/24793
* tree-ssa-loop-ivopts.c (get_ref_tag): Remember the
original reference if there are subvars.
* tree-ssa-operands.c (get_tmr_operands): Handle subvars.
Paul Brook [Mon, 19 Dec 2005 18:08:13 +0000 (18:08 +0000)]
Fix previous mis-applied patch.
* config/m68k/m68k.md (m68k_output_function_prologue): Always call
dwarf2out_def_cfa. Only add space for frame pointer to cfa_offset
when frame_pointer_needed.
Nathan Sidwell [Mon, 19 Dec 2005 10:51:46 +0000 (10:51 +0000)]
mt.md (decrement_and_branch_until_zero): Add another scratch.
* config/mt/mt.md (decrement_and_branch_until_zero): Add another
scratch. Correct its reload split. Adjust its peephole.
(doloop_end): Add additional scratch.
(nop): Use 'nop'.
* config/mt/mt.c (MT_INT_ARG_FIRST): Remove.
(mt_asm_output_opcode, mt_print_operand): Use 'nop'.
(mt_function_arg_slotno): Use FIRST_ARG_REGNUM.
(mt_builtin_saveregs): Replace with ...
(mt_setup_incoming_varargs): ... here. Save just the varadic
args.
(mt_va_start): Remove.
(mt_reorg_hazard): Ignore USE insns. Don't call set_noop_p.
(mt_machine_reorg): Split all insns here.
(TARGET_SETUP_INCOMING_VARARGS): Override.
* config/mt/mt.h (TARGET_CPU_CPP_BUILTINS): Define __mt__ only.
Set to CPU type.
(EXPAND_BUILTIN_VA_START): Remove.
Anthony Green [Mon, 19 Dec 2005 02:54:19 +0000 (02:54 +0000)]
natPlainDatagramSocketImplPosix.cc (getLocalAddress): New helper function.
2005-12-18 Anthony Green <green@redhat.com>
* gnu/java/net/natPlainDatagramSocketImplPosix.cc (getLocalAddress):
New helper function.
(setOption): Use getLocalAddress. Don't downcast value to
InetAddress.
(getOption): Use getLocalAddress.
* flow.c (update_life_info, count_or_remove_death_notes): Fixed
latent bug that could happen if update_life_info was called with a
blocks parameter and the call to cleanup_cfg actually deleted one
of those blocks.
Benjamin Kosnik [Mon, 19 Dec 2005 00:56:05 +0000 (00:56 +0000)]
c++config: Add in revised namespace associations.
2005-12-18 Benjamin Kosnik <bkoz@redhat.com>
* include/bits/c++config: Add in revised namespace associations.
_GLIBCXX_BEGIN_NAMESPACE: New macro.
_GLIBCXX_END_NAMESPACE: Same.
_GLIBCXX_BEGIN_NESTED_NAMESPACE: Same.
_GLIBCXX_END_NESTED_NAMESPACE: Same.
* acinclude.m4 (GLIBCXX_ENABLE_SYMVERS]): Add gnu-versioned-namespace.
* configure: Regenerated.
* config.h.in: Same.
* config/abi/pre/gnu-versioned-namespace.ver: New.
* config/abi/pre/gnu.ver (GLIBCXX_3.4.7): Add exports for nested
debug mode items.
* include/Makefile.am (${host_builddir}/c++config.h): Fill in
values for __GLIBCXX__ and _GLIBCXX_NAMESPACE_ASSOCIATION_VERSION.
* include/Makefile.in: Regnerate.
* src/compatibility.cc: Alias new, nested definitions to exported
symbols from non-nested __gnu_debug.
* src/Makefile.am: Add in ENABLE_SYMVERS_GNU_NAMESPACE.
* src/Makefile.in: Regenerate.
* docs/html/debug_mode.html: Revise for nested design.
* docs/html/debug.html: Use debug qualifications instead of
__gnu_debug.
* docs/html/configopts.html: Revise documentation for
--enable-symvers.
Zdenek Dvorak [Mon, 19 Dec 2005 00:12:14 +0000 (01:12 +0100)]
tree-flow.h (struct stmt_ann_d): Remove makes_aliased_loads and makes_aliased_stores fields.
* tree-flow.h (struct stmt_ann_d): Remove
makes_aliased_loads and makes_aliased_stores fields.
* tree-ssa-ccp.c (likely_value): Do not use makes_aliased_stores
and makes_aliased_loads fields.
* tree-ssa-dom.c (eliminate_redundant_computations): Do not
use makes_aliased_stores.
* tree-ssa-operands.c (clobbered_aliased_loads,
clobbered_aliased_stores, ro_call_aliased_loads): Removed.
(build_ssa_operands, add_stmt_operand, add_call_clobber_ops,
add_call_read_ops): Do not set makes_aliased_stores and
makes_aliased_loads fields.
* tree-ssa.c (verify_ssa): Do not verify makes_aliased_stores
field.
Ulrich Weigand [Sun, 18 Dec 2005 16:06:55 +0000 (16:06 +0000)]
re PR rtl-optimization/21041 (ICE: output_operand: Cannot decompose address)
PR rtl-optimization/21041
* reload.c (find_reloads_subreg_address): Replace paradoxical
subreg of MEM by widened access only if the resulting memory
is properly aligned, even on !STRICT_ALIGNMENT targets.
PR rtl-optimization/21041
* gcc.dg/pr21041.c: New test.
Paul Thomas [Sun, 18 Dec 2005 14:01:00 +0000 (14:01 +0000)]
re PR fortran/25018 (Segfault with simple expression)
2005-12-18 Paul Thomas <pault@gcc.gnu.org>
PR fortran/25018
*expr.c(check_inquiry): Return FAILURE if there is no symtree to
provide a name. Error/warning for assumed character length argument
to LEN for an initialization expression, using GFC_GNU_STD. Add an
argument to flag that the expression is not restricted.
(check_init_expr): Improve the message for a failing variable.
(gfc_match_init_expr): Call check_enquiry again to make sure that
unsimplified expressions are not causing unnecessary errors.
2005-12-18 Paul Thomas <pault@gcc.gnu.org>
PR fortran/25018
*gfortran.dg/initialization_1.f90: New test.
*gfortran.dg/enum_5.f90: Change dg-error to new message.
*gfortran.dg/g77/980616-0.f: The same.
Gabriel Dos Reis [Sun, 18 Dec 2005 09:26:53 +0000 (09:26 +0000)]
tree-tailcall.c (find_tail_calls): Use XNEW.
* tree-tailcall.c (find_tail_calls): Use XNEW.
* tree-ssa-dom.c (allocate_edge_info): Use XCNEW.
(free_all_edge_infos): Use explicit cast to convert from void
* *.
(vrp_free): Likewise.
(dom_opt_finalize_block): Likewise.
(record_equivalences_from_incoming_edge): Likewise.
(thread_across_edge): Likewise. Use XCNEWVEC.
(record_cond): Use XCNEW.
(record_conditions): Use XNEWVEC.
(record_edge_info): Use XCNEWVEC.
(lookup_avail_expr): Use XNEW.
(record_range): Likewise. Use GGC_NEW.
* tree-nested.c (var_map_hash): Use explicit cast to convert
* from
void *.
(var_map_eq): Likewise.
(lookup_field_for_decl): Likewise.
(convert_nonlocal_reference): Likewise.
(convert_local_reference): Likewise.
(convert_nl_goto_reference): Likewise.
(convert_nl_goto_receiver): Likewise.
(convert_call_expr): Likewise.
(convert_tramp_reference): Likewise.
(lookup_tramp_for_decl): Likewise.Use GGC_NEW.
(convert_nl_goto_reference): Likewise.
(lookup_field_for_decl): Use GGC_NEW.
(create_nesting_tree): Use GGC_CNEW.
* tree-ssa-phiopt.c (blocks_in_phiopt_order): Use XNEWVEC.
* tree-ssa-alias.c (init_alias_info): Use XCNEW.
(create_alias_map_for): Likewise.
(setup_pointers_and_addressables): Use XCNEWVEC.
(get_ptr_info): Use GGC_NEW.
(used_part_map_eq): Use explicit cast to convert from void *.
(up_lookup): Likewise.
(up_insert): Use XNEW.
(get_or_create_used_part_for): Use XCNEW.
(get_tmt_for): Likewise.
* tree-ssa-operands.c (ssa_operand_alloc): Use GGC_NEW.
* tree-ssa-pre.c (phi_trans_add): Use XNEW.
(bitmap_set_new): Use explicit cast to convert from void *.
(set_new): Likewise.
(insert_into_set): Likewise.
(pool_copy_list): Likewise.
(phi_translate): Likewise.
(create_value_expr_from): Likewise.
(insert_aux): Use XCNEWVEC.
(compute_avail): Use XNEWVEC.
* tree-ssa-live.c (calculate_live_on_entry): Likewise.
(sort_coalesce_list): Likewise.
(build_tree_conflict_graph): Use XCNEWVEC.
* tree-ssa-dce.c (tree_dce_init): Use XNEWVEC.
* tree-ssa-copy.c (init_copy_prop): Likewise.
(fini_copy_prop): Likewise.
* tree-ssa-uncprop.c (associate_equivalences_with_edges): Use
* XNEW
and XCNEWVEC.
(record_equiv): Use XNEW.
(uncprop_into_successor_phis): Use explicit cast to convert
* from
void *.
(uncprop_initialize_block): Likewise.
Jeff Law [Sun, 18 Dec 2005 07:23:08 +0000 (00:23 -0700)]
tree-ssa-dom.c (simplify_switch_and_lookup_avail_expr): Code to simplify SWITCH_EXPR_CODE moved from here to ...
* tree-ssa-dom.c (simplify_switch_and_lookup_avail_expr): Code
to simplify SWITCH_EXPR_CODE moved from here to ...
* tree-ssa-forwprop.c (simplify_switch_expr): Here.
(tree-ssa-forward_propagate_single_use_vars): Call
simplify_switch_expr when appropriate.
* config/m68k/m68k.md (m68k_output_function_prologue): Always call
dwarf2out_def_cfa. Only add space for frame pointer to cfa_offset
when frame_pointer_needed.
Gabriel Dos Reis [Sat, 17 Dec 2005 20:45:46 +0000 (20:45 +0000)]
tree-inline.c (copy_body_r): Use explicit cast when converting from void *.
* tree-inline.c (copy_body_r): Use explicit cast when
converting
from void *.
(copy_bb): Likewise.
(copy_edges_for_bb): Likewise.
(remap_decl_1): Likewise.
(estimate_num_insns_1): Likewise.
* cgraph.c (hash_node): Use explicit cast when converting from
void *.
(eq_node): Likewise.
(cgraph_create_node): Use GGC_CNEW.
(cgraph_create_edge): Use GGC_NEW.
(cgraph_remove_node): Use explicit cast when converting from
void *.
(hash_varpool_node): Likewise.
(eq_varpool_node): Likewise.
(cgraph_varpool_node): Use GGC_CNEW.
* lambda.h (lambda_vector_new): Use GGC_CNEWVEC.
* tree-scalar-evolution.c (new_scev_info_str): Use XNEW.
(eq_scev_info): Use explicit cast when converting from void *.
(find_var_scev_info): Likewise.
(set_instantiated_value): Likewise.
(gather_stats_on_scev_database_1): Likewise.
* cfgloop.h (simple_loop_desc): Use explicit cast when
converting
from void *.
* c-pch.c (c_common_write_pch): Use XNEWVEC.
(c_common_read_pch): Likewise.
* prefix.c (save_string): Use XNEWVEC.
(translate_name): Use explicit cast when converting from void
*.
* c-ppoutput.c (print_line): Use explicit cast when converting
from void *.
(pp_dir_change): Likewise.
* c-cppbuiltin.c (builtin_define_std): Likewise.
(builtin_define_with_value): Likewise.
(builtin_define_with_value_n): Likewise.
(builtin_define_with_int_value): Likewise.
(builtin_define_type_max): Likewise.
* c-incpath.c (add_env_var_paths): Use XNEWVEC.
(add_path): Use XNEW.
* c-format.c (check_format_info_main): Use GGC_NEW.
(format_type_warning): Use explicit cast when converting from
void *.
* c-typeck.c (alloc_tagged_tu_seen_cache): Use XNEW instead of
xmalloc.
(start_init): Likewise.
* tree-flow-inline.h (first_referenced_var): Use explicit cast
when converting from void *.
(next_referenced_var): Likewise.
* c-pragma.c (push_alignment): Use GGC_NEW instead of
ggc_alloc.
* gensupport.c (lookup_predicate): Use explicit cast to
convert
from void *.
(init_predicate_table): Use XCNEW instead of xcalloc.
* genpreds.c (process_define_predicate): Likewise.
Gabriel Dos Reis [Sat, 17 Dec 2005 17:21:34 +0000 (17:21 +0000)]
floatformat.c (floatformat_i387_ext_is_valid): Use explicit cast to convert from "from".
* floatformat.c (floatformat_i387_ext_is_valid): Use explicit cast
to convert from "from".
(floatformat_to_double): Likewise.
(floatformat_from_double): Use explicit cast to convert from "to".
Gabriel Dos Reis [Sat, 17 Dec 2005 15:36:35 +0000 (15:36 +0000)]
valarray_after.h (_Expr<>::operator[](slice)): Don't assume the closure implements general indexing...
* include/bits/valarray_after.h (_Expr<>::operator[](slice)):
Don't assume the closure implements general indexing, as a matter
of fact, most of them don't.
(_Expr<>::operator[](const gslice&)): Likewise.
(_Expr<>::operator[](const valarray<bool>&)): Likewise.
(_Expr<>::operator[](const valarray<size_t>&)): Likewise.
(_Expr<>::shift): Fix thinko.
(_Expr<>::cshift): Likewise.
(_Expr<>::apply): Likewise.
* tree-ssa-dom.c (update_rhs_and_lookup_avail_expr): Kill.
(simplify_rhs_and_lookup_avail_expr): Kill. Remnants moved
into tree-ssa-forwprop.c.
(eliminate_redundant_computations): Do not call
simplify_rhs_and_lookup_avail_expr anymore.
* tree-ssa-forwprop.c (simplify_not_neg_expr): New function
extracted from remnants of simplify_rhs_and_lookup_avail_expr.
(tree_ssa_forward_propagate_single_use_vars): Call
simplify_not_neg_expr appropriately.
Jerry DeLisle [Fri, 16 Dec 2005 19:32:21 +0000 (19:32 +0000)]
re PR fortran/25264 (write to internal unit from the string itself gives wrong result ?)
2005-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
PR libgfortran/25264
PR libgfortran/25349
* io/unit.c (get_unit): Delete code that cleared the string when the
unit was opened, which is too soon.
* io/transfer.c (next_record_w): Pass done flag in. Change logic for
setting max_pos. Add code to position unit and pad record as needed.
projects / thirdparty / gcc.git / log
