The commit 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code")
adds helper function, try_write_vid_and_data(), to simplify the code, but this
helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr()
or the ubi_io_write_data() return error number (-EIO, etc), because the return
value of ubi_wl_put_peb() will overwrite the original return value.
This issue will cause unexpected data loss issue, because the caller of this
function and UBIFS willn't know the data is lost.
Fixes: 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code") Cc: stable@vger.kernel.org Signed-off-by: Wang YanQing <udknight@gmail.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fetch a reproducer in [Link].
Function copy_znode() is split into 2 parts: resource allocation
and znode replacement, insert_old_idx() is split in similar way,
so resource cleanup could be done in error handling path without
corrupting metadata(mem & disk).
It's okay that old index inserting is put behind of add_idx_dirt(),
old index is used in layout_leb_in_gaps(), so the two processes do
not depend on each other.
This reverts commit 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak
in error handling path).
After commit 122deabfe1428 applied, if insert_old_idx() failed, old
index neither exists in TNC nor in old-index tree. Which means that
old index node could be overwritten in layout_leb_in_gaps(), then
ubifs image will be corrupted in power-cut.
sbi_probe_extension() is specified with "Returns 0 if the given SBI
extension ID (EID) is not available, or 1 if it is available unless
defined as any other non-zero value by the implementation."
Additionally, sbiret.value is a long. Fix the implementation to
ensure any nonzero long value is considered a success, rather
than only positive int values.
Fixes: b9dcd9e41587 ("RISC-V: Add basic support for SBI v0.2") Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230427163626.101042-1-ajones@ventanamicro.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9c6ff94e43a ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") while refactoring guest virtual APIC
activation/de-activation code, stored information for activate/de-activate
in "struct amd_ir_data". It used 32-bit integer data type for storing the
"Guest Virtual APIC Table Root Pointer" (ga_root_ptr), though the
"ga_root_ptr" is actually a 40-bit field in IRTE (Interrupt Remapping
Table Entry).
This causes interrupts from PCIe devices to not reach the guest in the case
of PCIe passthrough with SME (Secure Memory Encryption) enabled as _SME_
bit in the "ga_root_ptr" is lost before writing it to the IRTE.
Fix it by using 64-bit data type for storing the "ga_root_ptr". While at
that also change the data type of "ga_tag" to u32 in order to match
the IOMMU spec.
This file defines both read and write operations, yet it is being
created as read-only. This means that it can't be written to without the
CAP_DAC_OVERRIDE capability. Fix the permissions to allow root to write
to it without the need to override DAC perms.
create_fdt_early_page_table() explicitly uses early_pg_dir for
32-bit fdt mapping and the pgdir parameter is redundant here.
So remove it and its caller.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Song Shuai <suagrfillet@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Fixes: ef69d2559fe9 ("riscv: Move early dtb mapping into the fixmap region") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230426100009.685435-1-suagrfillet@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using standard mode, rare false ACK responses were appearing with
i2cdetect tool. This was happening due to NACK interrupt triggering
ISR thread before register access interrupt was ready. Removing the
NACK interrupt's ability to trigger ISR thread lets register access
ready interrupt do this instead.
Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.
This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.
The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.
Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).
Fixes: a5b2781dcab2 ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530") Reported-by: Русев Путин <rockeraliexpress@gmail.com> Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/ Cc: 6.1+ <stable@vger.kernel.org> # 6.1+ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deadlock is triggered by sending multiple concurrent session setup
requests. It should be reused after releasing when getting ctx for crypto.
Multiple consecutive ctx uses cause deadlock while waiting for releasing
due to the limited number of ctx.
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20591 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If client send session setup request with unknown NTLMSSP message type,
session that does not included channel can be created. It will cause
session memleak. because ksmbd_sessions_deregister() does not destroy
session if channel is not included. This patch return error response if
client send the request unknown NTLMSSP message type.
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20593 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
racy issue is triggered the bug by racing between closing a connection
and rmmod. In ksmbd, rcu_barrier() is not called at module unload time,
so nothing prevents ksmbd from getting unloaded while it still has RCU
callbacks pending. It leads to trigger unintended execution of kernel
code locally and use to defeat protections such as Kernel Lockdown
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-20477 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Read mmu_invalidate_seq before dropping the mmap_lock so that KVM can
detect if the results of vma_lookup() (e.g. vma_shift) become stale
before it acquires kvm->mmu_lock. This fixes a theoretical bug where a
VMA could be changed by userspace after vma_lookup() and before KVM
reads the mmu_invalidate_seq, causing KVM to install page table entries
based on a (possibly) no-longer-valid vma_shift.
Re-order the MMU cache top-up to earlier in user_mem_abort() so that it
is not done after KVM has read mmu_invalidate_seq (i.e. so as to avoid
inducing spurious fault retries).
It's unlikely that any sane userspace currently modifies VMAs in such a
way as to trigger this race. And even with directed testing I was unable
to reproduce it. But a sufficiently motivated host userspace might be
able to exploit this race.
Note KVM/ARM had the same bug and was fixed in a separate, near
identical patch (see Link).
Currently, there are issues with enabling PSR-SU + DSC. This stems from
the fact that DSC imposes a slice height on transmitted video data and
we are not conforming to that slice height in PSR-SU regions. So, pass
slice_height into su_y_granularity to feed the DSC slice height into
PSR-SU code.
Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 0b5dfe12755f ("drm/amd/display: fix a divided-by-zero error") Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
1. It could hit bandwidth limitdation under single dimm
memory when connecting 8K external monitor.
2. IsSupportedVidPn got validation failed with
2K240Hz eDP + 8K24Hz external monitor.
3. It's better to filter out such combination in
EnumVidPnCofuncModality
4. For short term, filter out in dc bandwidth validation.
[How]
Force 2K@240Hz+8K@24Hz timing validation false in dc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Daniel Miess <Daniel.Miess@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[why]
Newer ASICs such as DCN314 needs to allow for both self refresh and mem
clk switching rather than just self refresh only. Otherwise, we can see
some p-state hangs on ASICs that do support mem clk switching.
[how]
Added an allow_self_refresh_only flag for dcn30_internal_validate_bw
and created a validate_bw method for DCN314 with the allow_self_refresh_only
flag set to false (to support mem clk switching).
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nasir Osman <nasir.osman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 1e994cc0956b ("drm/amd/display: limit timing for single dimm memory") Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a crash in relay_file_read, as the var from
point to the end of last subbuf.
The oops looks something like:
pc : __arch_copy_to_user+0x180/0x310
lr : relay_file_read+0x20c/0x2c8
Call trace:
__arch_copy_to_user+0x180/0x310
full_proxy_read+0x68/0x98
vfs_read+0xb0/0x1d0
ksys_read+0x6c/0xf0
__arm64_sys_read+0x20/0x28
el0_svc_common.constprop.3+0x84/0x108
do_el0_svc+0x74/0x90
el0_svc+0x1c/0x28
el0_sync_handler+0x88/0xb0
el0_sync+0x148/0x180
We get the condition by analyzing the vmcore:
1). The last produced byte and last consumed byte
both at the end of the last subbuf
2). A softirq calls function(e.g __blk_add_trace)
to write relay buffer occurs when an program is calling
relay_file_read_avail().
relay_file_read
relay_file_read_avail
relay_file_read_consume(buf, 0, 0);
//interrupted by softirq who will write subbuf
....
return 1;
//read_start point to the end of the last subbuf
read_start = relay_file_read_start_pos
//avail is equal to subsize
avail = relay_file_read_subbuf_avail
//from points to an invalid memory address
from = buf->start + read_start
//system is crashed
copy_to_user(buffer, from, avail)
Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com Fixes: 8d62fdebdaf9 ("relay file read: start-pos fix") Signed-off-by: Zhang Zhengming <zhang.zhengming@h3c.com> Reviewed-by: Zhao Lei <zhao_lei1@hoperun.com> Reviewed-by: Zhou Kete <zhou.kete@h3c.com> Reviewed-by: Pengcheng Yang <yangpc@wangsu.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f00327731131 ("KVM: arm64: Use config_lock to protect vgic
state") was meant to rectify a longstanding lock ordering issue in KVM
where the kvm->lock is taken while holding vcpu->mutex. As it so
happens, the aforementioned commit introduced yet another locking issue
by acquiring the its_lock before acquiring the config lock.
This is obviously wrong, especially considering that the lock ordering
is well documented in vgic.c. Reshuffle the locks once more to take the
config_lock before the its_lock. While at it, sprinkle in the lockdep
hinting that has become popular as of late to keep lockdep apprised of
our ordering.
Cc: stable@vger.kernel.org Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230412062733.988229-1-oliver.upton@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Almost all of the vgic state is VM-scoped but accessed from the context
of a vCPU. These accesses were serialized on the kvm->lock which cannot
be nested within a vcpu->mutex critical section.
Move over the vgic state to using the config_lock. Tweak the lock
ordering where necessary to ensure that the config_lock is acquired
after the vcpu->mutex. Acquire the config_lock in kvm_vgic_create() to
avoid a race between the converted flows and GIC creation. Where
necessary, continue to acquire kvm->lock to avoid a race with vCPU
creation (i.e. flows that use lock_all_vcpus()).
Finally, promote the locking expectations in comments to lockdep
assertions and update the locking documentation for the config_lock as
well as vcpu->mutex.
There are various bits of VM-scoped data that can only be configured
before the first call to KVM_RUN, such as the hypercall bitmaps and
the PMU. As these fields are protected by the kvm->lock and accessed
while holding vcpu->mutex, this is yet another example of lock
inversion.
Change out the kvm->lock for kvm->arch.config_lock in all of these
instances. Opportunistically simplify the locking mechanics of the
PMU configuration by holding the config_lock for the entirety of
kvm_arm_pmu_v3_set_attr().
Note that this also addresses a couple of bugs. There is an unguarded
read of the PMU version in KVM_ARM_VCPU_PMU_V3_FILTER which could race
with KVM_ARM_VCPU_PMU_V3_SET_PMU. Additionally, until now writes to the
per-vCPU vPMU irq were not serialized VM-wide, meaning concurrent calls
to KVM_ARM_VCPU_PMU_V3_IRQ could lead to a false positive in
pmu_irq_is_valid().
Cc: stable@vger.kernel.org Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230327164747.2466958-4-oliver.upton@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kvm->lock must be taken outside of the vcpu->mutex. Of course, the
locking documentation for KVM makes this abundantly clear. Nonetheless,
the locking order in KVM/arm64 has been wrong for quite a while; we
acquire the kvm->lock while holding the vcpu->mutex all over the shop.
All was seemingly fine until commit 42a90008f890 ("KVM: Ensure lockdep
knows about kvm->lock vs. vcpu->mutex ordering rule") caught us with our
pants down, leading to lockdep barfing:
======================================================
WARNING: possible circular locking dependency detected
6.2.0-rc7+ #19 Not tainted
------------------------------------------------------
qemu-system-aar/859 is trying to acquire lock: ffff5aa69269eba0 (&host_kvm->lock){+.+.}-{3:3}, at: kvm_reset_vcpu+0x34/0x274
but task is already holding lock: ffff5aa68768c0b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x8c/0xba0
which lock already depends on the new lock.
Add a dedicated lock to serialize writes to VM-scoped configuration from
the context of a vCPU. Protect the register width flags with the new
lock, thus avoiding the need to grab the kvm->lock while holding
vcpu->mutex in kvm_reset_vcpu().
KVM/arm64 had the lock ordering backwards on vcpu->mutex and kvm->lock
from the very beginning. One such example is the way vCPU resets are
handled: the kvm->lock is acquired while handling a guest CPU_ON PSCI
call.
Add a dedicated lock to serialize writes to kvm_vcpu_arch::{mp_state,
reset_state}. Promote all accessors of mp_state to {READ,WRITE}_ONCE()
as readers do not acquire the mp_state_lock. While at it, plug yet
another race by taking the mp_state_lock in the KVM_SET_MP_STATE ioctl
handler.
As changes to MP state are now guarded with a dedicated lock, drop the
kvm->lock acquisition from the PSCI CPU_ON path. Similarly, move the
reader of reset_state outside of the kvm->lock and instead protect it
with the mp_state_lock. Note that writes to reset_state::reset have been
demoted to regular stores as both readers and writers acquire the
mp_state_lock.
While the kvm->lock inversion still exists in kvm_reset_vcpu(), at least
now PSCI CPU_ON no longer depends on it for serializing vCPU reset.
Cc: stable@vger.kernel.org Tested-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230327164747.2466958-2-oliver.upton@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend VMX's nested intercept logic for emulated instructions to handle
"pause" interception, in quotes because KVM's emulator doesn't filter out
NOPs when checking for nested intercepts. Failure to allow emulation of
NOPs results in KVM injecting a #UD into L2 on any NOP that collides with
the emulator's definition of PAUSE, i.e. on all single-byte NOPs.
For PAUSE itself, honor L1's PAUSE-exiting control, but ignore PLE to
avoid unnecessarily injecting a #UD into L2. Per the SDM, the first
execution of PAUSE after VM-Entry is treated as the beginning of a new
loop, i.e. will never trigger a PLE VM-Exit, and so L1 can't expect any
given execution of PAUSE to deterministically exit.
... the processor considers this execution to be the first execution of
PAUSE in a loop. (It also does so for the first execution of PAUSE at
CPL 0 after VM entry.)
All that said, the PLE side of things is currently a moot point, as KVM
doesn't expose PLE to L1.
Note, vmx_check_intercept() is still wildly broken when L1 wants to
intercept an instruction, as KVM injects a #UD instead of synthesizing a
nested VM-Exit. That issue extends far beyond NOP/PAUSE and needs far
more effort to fix, i.e. is a problem for the future.
Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: Mathias Krause <minipli@grsecurity.net> Cc: stable@vger.kernel.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20230405002359.418138-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disallow enabling LBR support if the CPU supports architectural LBRs.
Traditional LBR support is absent on CPU models that have architectural
LBRs, and KVM doesn't yet support arch LBRs, i.e. KVM will pass through
non-existent MSRs if userspace enables LBRs for the guest.
Cc: stable@vger.kernel.org Cc: Yang Weijiang <weijiang.yang@intel.com> Cc: Like Xu <like.xu.linux@gmail.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: be635e34c284 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES") Tested-by: Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20230128001427.2548858-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 054a3ef683a1 ("cpufreq: qcom-hw: Allocate qcom_cpufreq_data
during probe") moved getting memory resource and iomap from
qcom_cpufreq_hw_cpu_init() to the probe function, however it left
untouched cleanup in qcom_cpufreq_hw_cpu_exit().
During device unbind this will lead to doule release of resource and
double iounmap(), first by qcom_cpufreq_hw_cpu_exit() and second via
managed resources:
Reiserfs sets a security xattr at inode creation time in two stages: first,
it calls reiserfs_security_init() to obtain the xattr from active LSMs;
then, it calls reiserfs_security_write() to actually write that xattr.
Unfortunately, it seems there is a wrong expectation that LSMs provide the
full xattr name in the form 'security.<suffix>'. However, LSMs always
provided just the suffix, causing reiserfs to not write the xattr at all
(if the suffix is shorter than the prefix), or to write an xattr with the
wrong name.
Add a temporary buffer in reiserfs_security_write(), and write to it the
full xattr name, before passing it to reiserfs_xattr_set_handle().
Also replace the name length check with a check that the full xattr name is
not larger than XATTR_NAME_MAX.
Cc: stable@vger.kernel.org # v2.6.x Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Registering a kprobe on __rcu_irq_enter_check_tick() can cause kernel
stack overflow as shown below. This issue can be reproduced by enabling
CONFIG_NO_HZ_FULL and booting the kernel with argument "nohz_full=",
and then giving the following commands at the shell prompt:
The performance of the crypto fuzz tests has greatly regressed since
v5.18. When booting a kernel on an arm64 dev board with all software
crypto algorithms and CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled, the
fuzz tests now take about 200 seconds to run, or about 325 seconds with
lockdep enabled, compared to about 5 seconds before.
The root cause is that the random number generation has become much
slower due to commit d4150779e60f ("random32: use real rng for
non-deterministic randomness"). On my same arm64 dev board, at the time
the fuzz tests are run, get_random_u8() is about 345x slower than
prandom_u32_state(), or about 469x if lockdep is enabled.
Lockdep makes a big difference, but much of the rest comes from the
get_random_*() functions taking a *very* slow path when the CRNG is not
yet initialized. Since the crypto self-tests run early during boot,
even having a hardware RNG driver enabled (CONFIG_CRYPTO_DEV_QCOM_RNG in
my case) doesn't prevent this. x86 systems don't have this issue, but
they still see a significant regression if lockdep is enabled.
Converting the "Fully random bytes" case in generate_random_bytes() to
use get_random_bytes() helps significantly, improving the test time to
about 27 seconds. But that's still over 5x slower than before.
This is all a bit silly, though, since the fuzz tests don't actually
need cryptographically secure random numbers. So let's just make them
use a non-cryptographically-secure RNG as they did before. The original
prandom_u32() is gone now, so let's use prandom_u32_state() instead,
with an explicitly managed state, like various other self-tests in the
kernel source tree (rbtree_test.c, test_scanf.c, etc.) already do. This
also has the benefit that no locking is required anymore, so performance
should be even better than the original version that used prandom_u32().
Fixes: d4150779e60f ("random32: use real rng for non-deterministic randomness") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aesbs_ecb_encrypt(), aesbs_ecb_decrypt(), aesbs_xts_encrypt(), and
aesbs_xts_decrypt() are called via indirect function calls. Therefore
they need to use SYM_TYPED_FUNC_START instead of SYM_FUNC_START to cause
their type hashes to be emitted when the kernel is built with
CONFIG_CFI_CLANG=y. Otherwise, the code crashes with a CFI failure if
the compiler doesn't happen to optimize out the indirect calls.
Fixes: c50d32859e70 ("arm64: Add types to indirect called assembly functions") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A failure loading the safexcel driver results in the following warning
on boot, because the IRQ affinity has not been correctly cleaned up.
Ensure we clean up the affinity and workqueues on a failure to load the
driver.
The crypto_unregister_alg() function expects callers to ensure that any
algorithm that is unregistered has a refcnt of exactly 1, and issues a
BUG_ON() if this is not the case. However, there are in fact drivers that
will call crypto_unregister_alg() without ensuring that the refcnt has been
lowered first, most notably on system shutdown. This causes the BUG_ON() to
trigger, which prevents a clean shutdown and hangs the system.
To avoid such hangs on shutdown, demote the BUG_ON() in
crypto_unregister_alg() to a WARN_ON() with early return. Cc stable because
this problem was observed on a 6.2 kernel, cf the link below.
If something was written to the buffer just before destruction,
it may be possible (maybe not in a real system, but it did
happen in ARCH=um with time-travel) to destroy the ringbuffer
before the IRQ work ran, leading this KASAN report (or a crash
without KASAN):
BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a
Read of size 8 at addr 000000006d640a48 by task swapper/0
The buggy address belongs to the object at 000000006d640800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 584 bytes inside of
freed 1024-byte region [000000006d640800, 000000006d640c00)
Add the appropriate irq_work_sync() so the work finishes before
the buffers are destroyed.
Prior to the commit in the Fixes tag below, there was only a
single global IRQ work, so this issue didn't exist.
In ring_buffer_reset_online_cpus, the buffer_size_kb write operation
may permanently fail if the cpu_online_mask changes between two
for_each_online_buffer_cpu loops. The number of increases and decreases
on both cpu_buffer->resize_disabled and cpu_buffer->record_disabled may be
inconsistent, causing some CPUs to have non-zero values for these atomic
variables after the function returns.
This issue can be reproduced by "echo 0 > trace" while hotplugging cpu.
After reproducing success, we can find out buffer_size_kb will not be
functional anymore.
To prevent leaving 'resize_disabled' and 'record_disabled' non-zero after
ring_buffer_reset_online_cpus returns, we ensure that each atomic variable
has been set up before atomic_sub() to it.
Link: https://lore.kernel.org/linux-trace-kernel/20230426062027.17451-1-Tze-nan.Wu@mediatek.com Cc: stable@vger.kernel.org Cc: <mhiramat@kernel.org> Cc: npiggin@gmail.com Fixes: b23d7a5f4a07 ("ring-buffer: speed up buffer resets by avoiding synchronize_rcu for each CPU") Reviewed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com> Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per Hardware Programming Guide, when configuring pin as output,
set the pin value before setting output-enable (OE). Similar approach
is in main SoC TLMM pin controller.
According to the comment and to downstream sources, the
SWRM_CONTINUE_EXEC_ON_CMD_IGNORE in SWRM_CMD_FIFO_CFG_ADDR register
should be set for v1.5.1 and newer, so fix the >= operator.
Fixes: 542d3491cdd7 ("soundwire: qcom: set continue execution flag for ignored commands") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230222140343.188691-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fix is basically the same as 9bce02ef0dfa ("pwm: meson: Fix the
G12A AO clock parents order"). Vendor driver referenced there has
xtal as first parent also for axg ao. In addition fix the name
of the aoclk81 clock. Apparently name aoclk81 as used by the vendor
driver was changed when mainlining the axg clock driver.
Use primary channel index to determine which 5 MHz mask should be enable.
This mask is used to prevent noise from channel edge to effect CCA
threshold in wide bandwidth (>= 40 MHZ).
Fixes: 1b00e9236a71 ("rtw89: 8852c: add set channel of BB part") Fixes: 6b0698984eb0 ("wifi: rtw89: 8852b: add chip_ops::set_channel") Cc: stable@vger.kernel.org Signed-off-by: Eric Huang <echuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230406072841.8308-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the documentation, ieee80211_rx_list must not run concurrently
with ieee80211_tx_status (or its variants).
Cc: stable@vger.kernel.org Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Reported-by: Brian Coverstone <brian@mainsequence.net> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination
and source buffers. Defining kernel_headers_data as "char" would trip
this check. Since these addresses are treated as byte arrays, define
them as arrays (as done everywhere else).
This was seen with:
$ cat /sys/kernel/kheaders.tar.xz >> /dev/null
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1027!
...
RIP: 0010:fortify_panic+0xf/0x20
[...]
Call Trace:
<TASK>
ikheaders_read+0x45/0x50 [kheaders]
kernfs_fop_read_iter+0x1a4/0x2f0
...
Reported-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20230302112130.6e402a98@kernel.org/ Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 43d8ce9d65a5 ("Provide in-kernel headers to make extending kernel easier") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230302224946.never.243-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The priv->chan_out_states array and actual DAC value can become
mismatched if stx104_write_raw() is called concurrently. Prevent such a
race condition by utilizing a mutex.
Fixes: 97a445dad37a ("iio: Add IIO support for the DAC on the Apex Embedded Systems STX104") Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/c95c9a77fcef36b2a052282146950f23bbc1ebdc.1680790580.git.william.gray@linaro.org Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ADC conversion procedure requires several device I/O operations
performed in a particular sequence. If stx104_read_raw() is called
concurrently, the ADC conversion procedure could be clobbered. Prevent
such a race condition by utilizing a mutex.
The ipmi communication is not restored after a specific version of BMC is
upgraded on our server.
The ipmi driver does not respond after printing the following log:
ipmi_ssif: Invalid response getting flags: 1c 1
I found that after entering this branch, ssif_info->ssif_state always
holds SSIF_GETTING_FLAGS and never return to IDLE.
As a result, the driver cannot be loaded, because the driver status is
checked during the unload process and must be IDLE in shutdown_ssif():
while (ssif_info->ssif_state != SSIF_IDLE)
schedule_timeout(1);
The process trigger this problem is:
1. One msg timeout and next msg start send, and call
ssif_set_need_watch().
2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change
ssif_state to SSIF_GETTING_FLAGS.
3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error
message is received, the second branch does not modify the ssif_state.
4. All retry action need IS_SSIF_IDLE() == True. Include retry action in
watch_timeout(), msg_done_handler(). Sending msg does not work either.
SSIF_IDLE is also checked in start_next_msg().
5. The only thing that can be triggered in the SSIF driver is
watch_timeout(), after destory_user(), this timer will stop too.
So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS
and can't send msg, no timer started, can't unload.
We did a comparative test before and after adding this patch, and the
result is effective.
'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.
Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.
And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.
Fixes: ab171b952c6e ("fs: move namespace sysctls and declare fs base directory") Cc: stable@vger.kernel.org # v5.17 Cc: Christian Brauner <brauner@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ] Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined.
However, cpu_is_hotpluggable() still returns true for those CPUs. This causes
torture tests that do offlining to end up trying to offline this CPU causing
test failures. Such failure happens on all architectures.
Fix the repeated error messages thrown by this (even if the hotplug errors are
harmless) by asking the opinion of the nohz subsystem on whether the CPU can be
hotplugged.
[ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ]
For drivers/base/ portion: Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Zhouyi Zhou <zhouzhouyi@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: rcu <rcu@vger.kernel.org> Cc: stable@vger.kernel.org Fixes: 2987557f52b9 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel") Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After upgrading from 5.16 to 6.1, our board with a MAX14830 started
producing lots of garbage data over UART. Bisection pointed out commit 285e76fc049c as the culprit. That patch tried to replace hand-written
code which I added in 2b4bac48c1084 ("serial: max310x: Use batched reads
when reasonably safe") with the generic regmap infrastructure for
batched operations.
Unfortunately, the `regmap_raw_read` and `regmap_raw_write` which were
used are actually functions which perform IO over *multiple* registers.
That's not what is needed for accessing these Tx/Rx FIFOs; the
appropriate functions are the `_noinc_` versions, not the `_raw_` ones.
Fix this regression by using `regmap_noinc_read()` and
`regmap_noinc_write()` along with the necessary `regmap_config` setup;
with this patch in place, our board communicates happily again. Since
our board uses SPI for talking to this chip, the I2C part is completely
untested.
There's a potential race before THRE/TEMT deasserts when DMA Tx is
starting up (or the next batch of continuous Tx is being submitted).
This can lead to misdetecting Tx empty condition.
It is entirely normal for THRE/TEMT to be set for some time after the
DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely
not empty at that point, it seems incorrect for serial8250_tx_empty()
claim Tx is empty.
Fix the race by also checking in serial8250_tx_empty() whether there's
DMA Tx active.
Note: This fix only addresses in-kernel race mainly to make using
TCSADRAIN/FLUSH robust. Userspace can still cause other races but they
seem userspace concurrency control problems.
Wire up the debugfs regset device pointer so that the controller is
resumed before accessing registers to avoid crashing or locking up if it
happens to be runtime suspended.
If userspace races tcsetattr() with a write, the drained condition
might not be guaranteed by the kernel. There is a race window after
checking Tx is empty before tty_set_termios() takes termios_rwsem for
write. During that race window, more characters can be queued by a
racing writer.
Any ongoing transmission might produce garbage during HW's
->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be
preventing such a character corruption. If those flags are set, take
tty's write lock to stop any writer before performing the lower layer
Tx empty check and wait for the pending characters to be sent (if any).
The initial wait for all-writers-done must be placed outside of tty's
write lock to avoid deadlock which makes it impossible to use
tty_wait_until_sent(). The write lock is retried if a racing write is
detected.
If blk_crypto_evict_key() sees that the key is still in-use (due to a
bug) or that ->keyslot_evict failed, it currently just returns while
leaving the key linked into the keyslot management structures.
However, blk_crypto_evict_key() is only called in contexts such as inode
eviction where failure is not an option. So actually the caller
proceeds with freeing the blk_crypto_key regardless of the return value
of blk_crypto_evict_key().
These two assumptions don't match, and the result is that there can be a
use-after-free in blk_crypto_reprogram_all_keys() after one of these
errors occurs. (Note, these errors *shouldn't* happen; we're just
talking about what happens if they do anyway.)
Fix this by making blk_crypto_evict_key() unlink the key from the
keyslot management structures even on failure.
Also improve some comments.
Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option. So there is nothing the caller can do
with errors except log them. (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)
Just make blk_crypto_evict_key() return void and log errors itself.
Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key(). However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed. This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.
This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)
There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs. Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use.
Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq") Cc: stable@vger.kernel.org Reviewed-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Legacy Display Unit (LDU) fb dirty support used a custom fb dirty callback. Latter
handled only the DIRTYFB IOCTL presentation path but not the ADDFB2/PAGE_FLIP/RMFB
IOCTL path, common for Wayland compositors.
Get rid of the custom callback in favor of drm_atomic_helper_dirtyfb and unify the
handling of the presentation paths inside of vmw_ldu_primary_plane_atomic_update.
This also homogenizes the fb dirty callbacks across all DUs: LDU, SOU and STDU.
Signed-off-by: Martin Krastev <krastevm@vmware.com> Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com> Fixes: 2f5544ff0300 ("drm/vmwgfx: Use atomic helper function for dirty fb IOCTL") Cc: <stable@vger.kernel.org> # v5.0+ Signed-off-by: Zack Rusin <zackr@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230321020949.335012-3-zack@kde.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It the device is probed in non-zero ACPI D state, the module
identification is delayed until the first streamon.
The module identification has two parts: deviceID and version. To rea
the version we have to enable OTP read. This cannot be done during
streamon, becase it modifies REG_MODE_SELECT.
Since the driver has the same behaviour for all the module versions, do
not read the module version from the sensor's OTP.
Cc: stable@vger.kernel.org Fixes: 0e014f1a8d54 ("media: ov8856: support device probe in non-zero ACPI D state") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some unknown reason the introduction of the timer_wait_running callback
missed to fixup posix CPU timers, which went unnoticed for almost four years.
Marco reported recently that the WARN_ON() in timer_wait_running()
triggers with a posix CPU timer test case.
Posix CPU timers have two execution models for expiring timers depending on
CONFIG_POSIX_CPU_TIMERS_TASK_WORK:
1) If not enabled, the expiry happens in hard interrupt context so
spin waiting on the remote CPU is reasonably time bound.
Implement an empty stub function for that case.
2) If enabled, the expiry happens in task work before returning to user
space or guest mode. The expired timers are marked as firing and moved
from the timer queue to a local list head with sighand lock held. Once
the timers are moved, sighand lock is dropped and the expiry happens in
fully preemptible context. That means the expiring task can be scheduled
out, migrated, interrupted etc. So spin waiting on it is more than
suboptimal.
The timer wheel has a timer_wait_running() mechanism for RT, which uses
a per CPU timer-base expiry lock which is held by the expiry code and the
task waiting for the timer function to complete blocks on that lock.
This does not work in the same way for posix CPU timers as there is no
timer base and expiry for process wide timers can run on any task
belonging to that process, but the concept of waiting on an expiry lock
can be used too in a slightly different way:
- Add a mutex to struct posix_cputimers_work. This struct is per task
and used to schedule the expiry task work from the timer interrupt.
- Add a task_struct pointer to struct cpu_timer which is used to store
a the task which runs the expiry. That's filled in when the task
moves the expired timers to the local expiry list. That's not
affecting the size of the k_itimer union as there are bigger union
members already
- Let the task take the expiry mutex around the expiry function
- Let the waiter acquire a task reference with rcu_read_lock() held and
block on the expiry mutex
This avoids spin-waiting on a task which might not even be on a CPU and
works nicely for RT too.
Fixes: ec8f954a40da ("posix-timers: Use a callback for cancel synchronization on PREEMPT_RT") Reported-by: Marco Elver <elver@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marco Elver <elver@google.com> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87zg764ojw.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On DT unaware platforms of_property_read_u32_array() returns -ENOSYS
which wasn't handled by the code treating adi,pwm-active-state as
optional. Update the code to use device_property_read_u32_array() which
deals gracefully with DT unaware platforms.
Spec says, when CUR_TEMP_TJ_SEL == 3 and CUR_TEMP_RANGE_SEL == 0,
it should use RangeUnadjusted is 0, which is (CurTmp*0.125 -49) C. The
CUR_TEMP register is read-write when CUR_TEMP_TJ_SEL == 3 (bit 17-16).
It was observed that there are hosts that may complete pending SETUP
transactions before the stop active transfers and controller halt occurs,
leading to lingering endxfer commands on DEPs on subsequent pullup/gadget
start iterations.
The sequence shows that the USB gadget disconnect (dwc3_gadget_pullup(0))
routine completed successfully, allowing for the USB gadget to proceed with
a USB gadget connect. However, if this occurs the system runs into an
issue where:
BUG: spinlock already unlocked on CPU
spin_bug+0x0
dwc3_remove_requests+0x278
dwc3_ep0_out_start+0xb0
__dwc3_gadget_start+0x25c
This is due to the pending endxfers, leading to gadget start (w/o lock
held) to execute the remove requests, which will unlock the dwc3
spinlock as part of giveback.
To mitigate this, resolve the pending endxfers on the pullup disable
path by re-locating the SETUP phase check after stop active transfers, since
that is where the DWC3_EP_DELAY_STOP is potentially set. This also allows
for handling of a host that may be unresponsive by using the completion
timeout to trigger the stall and restart for EP0.
usb_gadget_connect calls gadget->ops->pullup without checking whether
gadget->connected was previously set. Make this symmetric to
usb_gadget_disconnect by returning early if gadget->connected is
already set.
Fixes: 5a1da544e572 ("usb: gadget: core: do not try to disconnect gadget if it is not connected") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20230407030741.3163220-2-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_udc_connect_control does not check to see if the udc has already
been started. This causes gadget->ops->pullup to be called through
usb_gadget_connect when invoked from usb_udc_vbus_handler even before
usb_gadget_udc_start is called. Guard this by checking for udc->started
in usb_udc_connect_control before invoking usb_gadget_connect.
Guarding udc->vbus, udc->started, gadget->connect, gadget->deactivate
related functions with connect_lock. usb_gadget_connect_locked,
usb_gadget_disconnect_locked, usb_udc_connect_control_locked,
usb_gadget_udc_start_locked, usb_gadget_udc_stop_locked are called with
this lock held as they can be simulataneously invoked from different code
paths.
Adding an additional check to make sure udc is started(udc->started)
before pullup callback is invoked.
The RTW88 chipsets have four different priority queues in hardware. For
the USB type chipsets the packets destined for a specific priority queue
must be sent through the endpoint corresponding to the queue. This was
not fully understood when porting from the RTW88 USB out of tree driver
and thus violated.
This patch implements the qsel to endpoint mapping as in
get_usb_bulkout_id_88xx() in the downstream driver.
Without this the driver often issues "timed out to flush queue 3"
warnings and often TX stalls completely.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: ValdikSS <iam@valdikss.org.ru> Tested-by: Alexandru gagniuc <mr.nuke.me@gmail.com> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230417140358.2240429-2-s.hauer@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UML supports HAS_IOMEM since 0bbadafdc49d (um: allow disabling
NO_IOMEM).
Current IMA build on UML fails on allmodconfig (with TCG_TPM=m):
ld: security/integrity/ima/ima_queue.o: in function `ima_add_template_entry':
ima_queue.c:(.text+0x2d9): undefined reference to `tpm_pcr_extend'
ld: security/integrity/ima/ima_init.o: in function `ima_init':
ima_init.c:(.init.text+0x43f): undefined reference to `tpm_default_chip'
ld: security/integrity/ima/ima_crypto.o: in function `ima_calc_boot_aggregate_tfm':
ima_crypto.c:(.text+0x1044): undefined reference to `tpm_pcr_read'
ld: ima_crypto.c:(.text+0x10d8): undefined reference to `tpm_pcr_read'
Modify the IMA Kconfig entry so that it selects TCG_TPM if HAS_IOMEM
is set, regardless of the UML Kconfig setting.
This updates TCG_TPM from =m to =y and fixes the linker errors.
commit 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
commit 479aa3b0ec2e ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
This turned out to be due to the patch getting applied through different
trees and git settled on a resolution while applying it second time. But
the second AT port of Foxconn devices don't work in PCIe mode. So the
second commit needs to be reverted.
Cc: stable@vger.kernel.org # 6.2 Fixes: 2d5253a096c6 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990") Signed-off-by: Slark Xiao <slark_xiao@163.com> Reviewed-by: Fabio Porcedda <fabio.porcedda@gmail.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://lore.kernel.org/r/20230310101715.69209-1-slark_xiao@163.com
[mani: massaged the commit message a bit, added fixes tag and CCed stable] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qcom PCIe IP version v2.7.0 and its derivatives don't contain the
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT register. Instead, they have the new
PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2 register. So fix the incorrect
register usage which is modifying a different register.
Also in this IP version, this register change doesn't depend on MSI
being enabled. So remove that check also.
Link: https://lore.kernel.org/r/20230316081117.14288-2-manivannan.sadhasivam@linaro.org Fixes: ed8cc3b1fc84 ("PCI: qcom: Add support for SDM845 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> # 5.6+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
amended PCIe hotplug to mask Presence Detect Changed events during a
Secondary Bus Reset. The reset thus no longer causes gratuitous slot
bringdown and bringup.
However the commits neglected to serialize reset with code paths reading
slot registers. For instance, a slot bringup due to an earlier hotplug
event may see the Presence Detect State bit cleared during a concurrent
Secondary Bus Reset.
In 2018, commit
5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset")
retrofitted the missing locking. It introduced a reset_lock which
serializes a Secondary Bus Reset with other parts of pciehp.
Unfortunately the locking turns out to be overzealous: reset_lock is
held for the entire enumeration and de-enumeration of hotplugged devices,
including driver binding and unbinding.
Driver binding and unbinding acquires device_lock while the reset_lock
of the ancestral hotplug port is held. A concurrent Secondary Bus Reset
acquires the ancestral reset_lock while already holding the device_lock.
The asymmetric locking order in the two code paths can lead to AB-BA
deadlocks.
Michael Haeuptle reports such deadlocks on simultaneous hot-removal and
vfio release (the latter implies a Secondary Bus Reset):
Fix by releasing the reset_lock during driver binding and unbinding,
thereby splitting and shrinking the critical section.
Driver binding and unbinding is protected by the device_lock() and thus
serialized with a Secondary Bus Reset. There's no need to additionally
protect it with the reset_lock. However, pciehp does not bind and
unbind devices directly, but rather invokes PCI core functions which
also perform certain enumeration and de-enumeration steps.
The reset_lock's purpose is to protect slot registers, not enumeration
and de-enumeration of hotplugged devices. That would arguably be the
job of the PCI core, not the PCIe hotplug driver. After all, an
AER-induced Secondary Bus Reset may as well happen during boot-time
enumeration of the PCI hierarchy and there's no locking to prevent that
either.
Exempting *de-enumeration* from the reset_lock is relatively harmless:
A concurrent Secondary Bus Reset may foil config space accesses such as
PME interrupt disablement. But if the device is physically gone, those
accesses are pointless anyway. If the device is physically present and
only logically removed through an Attention Button press or the sysfs
"power" attribute, PME interrupts as well as DMA cannot come through
because pciehp_unconfigure_device() disables INTx and Bus Master bits.
That's still protected by the reset_lock in the present commit.
Exempting *enumeration* from the reset_lock also has limited impact:
The exempted call to pci_bus_add_device() may perform device accesses
through pcibios_bus_add_device() and pci_fixup_device() which are now
no longer protected from a concurrent Secondary Bus Reset. Otherwise
there should be no impact.
In essence, the present commit seeks to fix the AB-BA deadlocks while
still retaining a best-effort reset protection for enumeration and
de-enumeration of hotplugged devices -- until a general solution is
implemented in the PCI core.
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().
Fixes: d19afe7be126 ("PCI: kirin: Use regmap for APB registers") Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select] Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org # 5.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-mcpu=power10 will generate prefixed and pcrel code by default, which
we do not support. The general kernel disables these with cflags, but
those were missed for the boot wrapper.
Fixes: 4b2a9315f20d ("powerpc/64s: POWER10 CPU Kconfig build option") Cc: stable@vger.kernel.org # v6.1+ Reported-by: Danny Tsen <dtsen@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230407040909.230998-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of reloading the shadow call stack pointer from the ordinary
stack, which may be vulnerable to the kind of gadget based attacks
shadow call stacks were designed to prevent, let's store a task's shadow
call stack pointer in the task struct when switching to the shadow IRQ
stack.
Given that currently, the task_struct::scs_sp field is only used to
preserve the shadow call stack pointer while a task is scheduled out or
running in user space, reusing this field to preserve and restore it
while running off the IRQ stack must be safe, as those occurrences are
guaranteed to never overlap. (The stack switching logic only switches
stacks when running from the task stack, and so the value being saved
here always corresponds to the task mode shadow stack)
While at it, fold a mov/add/mov sequence into a single add.
All occurrences of the scs_load macro load the value of the shadow call
stack pointer from the task which is current at that point. So instead
of taking a task struct register argument in the scs_load macro to
specify the task struct to load from, let's always reference the current
task directly. This should make it much harder to exploit any
instruction sequences reloading the shadow call stack pointer register
from memory.
Updating the clock source from ACLK to default clock
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com> Link: https://lore.kernel.org/r/20230331052102.2211115-1-Syed.SabaKareem@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the BIOS has been configured for Fast Boot, systems with mt7921e
have non-functional wifi. Turning on Fast boot caused both bus master
enable and memory space enable bits in PCI_COMMAND not to get configured.
The mt7921 driver already sets bus master enable, but explicitly check
and set memory access enable as well to fix this problem.
Tested-by: Anson Tsao <anson.tsao@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copy the forced type casts from the normal MMIO accessors to suppress
the sparse warnings that point out __raw_readl() returns a native endian
word (just like readl()).
A __field() in the TRACE_EVENT() macro is used to set up the fields of the
trace event data. It is for single storage units (word, char, int,
pointer, etc) and not for complex structures or arrays. Unfortunately,
there's nothing preventing the build from accepting:
__field(int, arr[5]);
from building. It will turn into a array value. This use to work fine, as
the offset and size use to be determined by the macro using the field name,
but things have changed and the offset and size are now determined by the
type. So the above would only be size 4, and the next field will be
located 4 bytes from it (instead of 20).
The proper way to declare static arrays is to use the __array() macro.
Instead of __field(int, arr[5]) it should be __array(int, arr, 5).
Add some macro tricks to the building of a trace event from the
TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A
comment by the failure will explain why the build failed.
Currently ath11k breaks after hibernation, the reason being that ath11k expects
that the wireless device will have power during suspend and the firmware will
continue running. But of course during hibernation the power from the device is
cut off and firmware is not running when resuming, so ath11k will fail.
(The reason why ath11k needs the firmware running is the interaction between
mac80211 and MHI stack, it's a long story and more info in the bugzilla report.)
In SUSE kernels the watchdog timeout is reduced from the default 120 to 60 seconds:
CONFIG_DPM_WATCHDOG_TIMEOUT=60
But as the ath11k MHI timeout is 90 seconds the kernel will crash before will
ath11k will recover in resume callback. To avoid the crash reduce the MHI
timeout to just 20 seconds.
From the commit message adding the first s2idle quirks:
> Lenovo laptops that contain NVME SSDs across a variety of generations have
> trouble resuming from suspend to idle when the IOMMU translation layer is
> active for the NVME storage device.
>
> This generally manifests as a large resume delay or page faults. These
> delays and page faults occur as a result of a Lenovo BIOS specific SMI
> that runs during the D3->D0 transition on NVME devices.
Add the DMI ids for another variant of the T14s Gen1, which also needs
the s2idle quirk.
The HG MXPD-483II 1310nm SFP module is meant to operate with 2500Base-X,
however, in their EEPROM they incorrectly specify:
Transceiver type : Ethernet: 1000BASE-LX
...
BR, Nominal : 2600MBd
Use sfp_quirk_2500basex for this module to allow 2500Base-X mode anyway.
Reported-by: chowtom <chowtom@gmail.com> Tested-by: chowtom <chowtom@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver is exiting from the fault watchdog thread if it sees the 0xF002
(Soft reset in progress) fault code.
If the driver initiates the soft reset, then the driver restarts the
watchdog at the end of the soft reset completion. However, if the soft
reset is initiated by the firmware asynchronously, then the driver will
never restart the watchdog and never re-initialize the controller after the
asynchronous soft reset completion.
When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
343 | struct mount_attr attr = {
| ^~~~~~~~~~
These errors might be because of linux/mount.h is not included. This patch resolves that issue.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When playing with various compilers or their versions, some choke on
the t7xx code. For example (with gcc 13):
In file included from ./arch/s390/include/generated/asm/rwonce.h:1,
from ../include/linux/compiler.h:247,
from ../include/linux/build_bug.h:5,
from ../include/linux/bits.h:22,
from ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:17:
In function 'preempt_count',
inlined from 't7xx_fsm_append_event' at ../drivers/net/wwan/t7xx/t7xx_state_monitor.c:439:43:
../include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of 'const volatile int[0]' [-Werror=array-bounds=]
There is no reason for any code in the kernel to be built with -Werror
by default. Note that we have generic CONFIG_WERROR. So if anyone wants
-Werror, they can enable that.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Link: https://lore.kernel.org/all/20230330232717.1f8bf5ea@kernel.org/ Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Cc: Intel Corporation <linuxwwan@intel.com> Cc: Chiranjeevi Rapolu <chiranjeevi.rapolu@linux.intel.com> Cc: Liu Haijun <haijun.liu@mediatek.com> Cc: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults
for an Bay Trail CR tablet. Except for the internal mic, instead of
an analog mic on IN3 a digital mic on DMIC1 is uses.
Add a quirk with these settings for this tablet.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
