Jakub Jelinek [Tue, 10 Jul 2018 07:27:37 +0000 (09:27 +0200)]
re PR fortran/86421 (OpenMP declare simd linear ref in module causes gfortran to bail out)
PR fortran/86421
* module.c (omp_declare_simd_clauses): Add LINEAR with _REF, _VAL and
_UVAL suffixes.
(mio_omp_declare_simd): Save and restore ref, val and uval modifiers
on linear clauses. Initialize n->where to gfc_current_locus.
Jakub Jelinek [Tue, 10 Jul 2018 07:12:37 +0000 (09:12 +0200)]
re PR c++/86443 (ICEs on #pragma omp distribute parallel for with class iterators)
PR c++/86443
* gimplify.c (find_combined_omp_for): Add DATA argument, in addition
to finding the inner OMP_FOR/OMP_SIMD stmt find non-trivial wrappers,
BLOCKs with BLOCK_VARs, OMP_PARALLEL in between, OMP_FOR in between.
(gimplify_omp_for): For composite loops, move outer
OMP_{DISTRIBUTE,TASKLOOP,FOR,PARALLEL} right around innermost
OMP_FOR/OMP_SIMD if there are any non-trivial wrappers. For class
iterators add any needed clauses. Allow OMP_FOR_ORIG_DECLS to contain
TREE_LIST for both the original class iterator and the "last" helper
var. Gimplify OMP_FOR_PRE_BODY before the outermost composite
loop, remember has_decl_expr from outer composite loops for the
innermost OMP_SIMD in TREE_PRIVATE bit on OMP_FOR_INIT.
gcc/c-family/
* c-omp.c (c_omp_check_loop_iv_r, c_omp_check_loop_iv): Allow declv
to contain TREE_LIST for both the original class iterator and the
"last" helper var.
gcc/cp/
* semantics.c (handle_omp_for_class_iterator): Remove lastp argument,
instead of setting *lastp turn orig_declv elt into a TREE_LIST.
(finish_omp_for): Adjust handle_omp_for_class_iterator caller.
* pt.c (tsubst_omp_for_iterator): Allow OMP_FOR_ORIG_DECLS to contain
TREE_LIST for both the original class iterator and the "last" helper
var.
libgomp/
* testsuite/libgomp.c++/for-15.C: New test.
Ian Lance Taylor [Tue, 10 Jul 2018 00:55:28 +0000 (00:55 +0000)]
compiler: fix double evaluation with interface field expression
In Interface_field_reference_expression, the interface expression
is used in two places, so a temporary variable is used. Previously,
we used a Set_and_use_temporary_expression, which, when evaluated
twice, causes double evaluation of the underlying expression. Fix
by setting the temporary once and use Temporary_reference_expression
instead.
Martin Sebor [Mon, 9 Jul 2018 20:33:48 +0000 (20:33 +0000)]
PR middle-end/77357 - strlen of constant strings not folded
gcc/ChangeLog:
PR middle-end/77357
PR middle-end/86428
* builtins.c (c_strlen): Avoid out-of-bounds warnings when
accessing implicitly initialized array elements.
* expr.c (string_constant): Handle string initializers of
character arrays within aggregates.
* gimple-fold.c (fold_array_ctor_reference): Add argument.
Store element offset. As a special case, handle zero size.
(fold_nonarray_ctor_reference): Same.
(fold_ctor_reference): Add argument. Store subobject offset.
* gimple-fold.h (fold_ctor_reference): Add argument.
gcc/testsuite/ChangeLog:
PR middle-end/77357
* gcc.dg/strlenopt-49.c: New test.
* gcc.dg/strlenopt-50.c: New test.
* gcc.dg/strlenopt-51.c: New test.
* gcc.dg/strlenopt-52.c: New test.
Paul Koning [Mon, 9 Jul 2018 14:00:52 +0000 (10:00 -0400)]
Improve code generation for pdp11 target.
* config/pdp11/pdp11.c (pdp11_addr_cost): New function.
(pdp11_insn_cost): New function.
(pdp11_md_asm_adjust): New function.
(TARGET_INVALID_WITHIN_DOLOOP): Define.
(pdp11_rtx_costs): Update to match machine better.
(output_addr_const_pdp11): Correct format mismatch warnings.
* config/pdp11/pdp11.h (SLOW_BYTE_ACCESS): Correct definition.
* config/pdp11/pdp11.md: General change to add base_cost and/or
length attributes for use by new pdp11_insn_cost function.
(MIN_BRANCH): Correct definition.
(MIN_SOB): Ditto.
(doloop_end): Use standard pattern name for looping pattern.
(doloop_end_nocc): New.
(movsf): Add another constraint alternative.
(zero_extendqihi2): Add constraint alternatives for not in place
extend.
(zero_extendhisi2): Remove.
(shift patterns): Add CC handling variants.
(bswaphi2): New.
(bswapsi2): New.
(rothi3): New.
(define_peephole2): New peephole to recognize mov that sets CC for
subsequent test.
Jakub Jelinek [Mon, 9 Jul 2018 10:56:47 +0000 (12:56 +0200)]
re PR c/86420 (nextafter(0x1p-1022,0) is constant folded)
PR c/86420
* real.c (real_nextafter): Return true if result is denormal.
* gcc.dg/nextafter-1.c (TEST): Adjust the tests that expect denormals
to be returned and when first argument is not 0, so that they don't do
anything for NEED_EXC or NEED_ERRNO.
Tom de Vries [Mon, 9 Jul 2018 07:17:45 +0000 (07:17 +0000)]
[debug] Handle debug references to skipped params
When compiling guality/vla-1.c with -O3 -g, vla a in f1 is optimized away, but
f1 still contains a debug expression describing the upper bound of the vla
(D.1914):
...
__attribute__((noinline))
f1 (intD.6 iD.1900)
{
<bb 2>
saved_stack.1_2 = __builtin_stack_save ();
# DEBUG BEGIN_STMT
# DEBUG D#3 => i_1(D) + 1
# DEBUG D#2 => (long intD.8) D#3
# DEBUG D#1 => D#2 + -1
# DEBUG D.1914 => (sizetype) D#1
...
Then f1 is cloned to a version f1.constprop with no parameters, eliminating
parameter i, and 'DEBUG D#3 => i_1(D) + 1' turns into 'D#3 => NULL'.
This patch fixes that by defining debug expressions for default defs of
eliminated parameters in remap_ssa_name:
...
__attribute__((noinline))
f1.constprop ()
{
intD.6 iD.1949;
Eric Botcazou [Sat, 7 Jul 2018 10:46:10 +0000 (10:46 +0000)]
c-ada-spec.c (to_ada_name): Remove index parameter.
* c-ada-spec.c (to_ada_name): Remove index parameter.
(pp_ada_tree_identifier): Likewise.
(dump_ada_macros): Adjust call to to_ada_name.
(struct overloaded_name_hash): Delete.
(struct overloaded_name_hasher): Likewise.
(overloaded_names): Likewise.
(compute_overloading_index): Likewise.
(dump_ada_decl_name): Do not call compute_overloading_index and
adjust calls to pp_ada_tree_identifier.
(dump_ada_double_name): Adjust calls to pp_ada_tree_identifier.
(dump_ada_import): Add spc parameter and switch to aspect syntax.
(dump_ada_function_declaration): Adjust call to pp_ada_tree_identifier.
(dump_ada_enum_type): Remove type and display_convention parameters.
Adjust calls to pp_ada_tree_identifier.
(dump_ada_node): Likewise and for dump_ada_structure.
(dump_nested_type) <ENUMERAL_TYPE>: Adjust call to dump_ada_enum_type
and tidy up.
<RECORD_TYPE>: Adjust call to dump_ada_structure and switch to aspect
syntax.
(print_constructor): Adjust call to pp_ada_tree_identifier.
(print_destructor): Likewise.
(dump_ada_declaration): Switch to aspect syntax.
(dump_ada_structure): Likewise and tidy up. Replace display_convention
parameter with nested parameter.
(dump_ads): Emit pragma Ada_2012 in lieu of pragma Ada_2005.
(dump_ada_specs): Do not delete overloaded_names table.
Eric Botcazou [Sat, 7 Jul 2018 10:36:54 +0000 (10:36 +0000)]
decl.c (gnat_to_gnu_entity): Add GNAT_DECL local variable and use it throughout.
* gcc-interface/decl.c (gnat_to_gnu_entity): Add GNAT_DECL local
variable and use it throughout.
<E_Variable>: If the nominal subtype of the object is unconstrained,
compute the Ada size separately and put in on the padding type if the
size is not fixed.
<E_Record_Type>: Minor tweak.
* gcc-interface/misc.c (gnat_type_max_size): Rename max_size_unit
into max_size_unit throughout.
Eric Botcazou [Sat, 7 Jul 2018 10:20:12 +0000 (10:20 +0000)]
gigi.h (add_decl_expr): Adjust prototype.
* gcc-interface/gigi.h (add_decl_expr): Adjust prototype.
* gcc-interface/decl.c (gnat_to_gnu_entity): Remove useless test.
* gcc-interface/trans.c (add_stmt_with_node): Remove exceptions.
(add_decl_expr): Change type of second parameter and rename it.
(renaming_from_instantiation_p): New function moved from...
(set_expr_location_from_node): Test for exceptions here and add one
for actual subtypes built for unconstrained composite actuals.
* gcc-interface/utils.c (renaming_from_instantiation_p): ...here.
Eric Botcazou [Sat, 7 Jul 2018 10:06:08 +0000 (10:06 +0000)]
decl.c (gnat_to_gnu_param): Minor tweak.
* gcc-interface/decl.c (gnat_to_gnu_param): Minor tweak.
(gnat_to_gnu_subprog_type): New pure_flag local variable. Set it for
a pure Ada function with a by-ref In parameter. Propagate it onto the
function type by means of the TYPE_QUAL_RESTRICT flag.
* gcc-interface/utils.c (finish_subprog_decl): Set DECL_PURE_P if the
function type has the TYPE_QUAL_RESTRICT flag set.
Jakub Jelinek [Sat, 7 Jul 2018 07:47:10 +0000 (09:47 +0200)]
re PR target/84711 (AArch32 big-endian fails when taking subreg of a vector mode to a scalar mode.)
PR target/84711
* gcc.dg/vect/pr84711.c: Remove unnecessary sse
dg-require-effective-target. Add -msse not just on i386-*, but
on all i?86-* and x86_64-*.
* gcc.dg/tree-ssa/phi-opt-16.c: New test.
* gcc.dg/tree-ssa/phi-opt-17.c: New test.
* gcc.dg/tree-ssa/phi-opt-18.c: New test.
* gcc.dg/tree-ssa/phi-opt-19.c: New test.
* gcc.dg/tree-ssa/popcount3.c: New test.
Jakub Jelinek [Fri, 6 Jul 2018 21:42:41 +0000 (23:42 +0200)]
re PR tree-optimization/86401 (The "For constants M and N, if M == (1LL << cst) - 1 && (N & M) == M,..." opts are only in fold-const.c and in RTL)
PR tree-optimization/86401
* fold-const.c (fold_binary_loc) <case BIT_AND_EXPR>: Move the
((A & N) + B) & M -> (A + B) & M etc. optimization into ...
(fold_bit_and_mask): ... here. New helper function for match.pd.
* fold-const.h (fold_bit_and_mask): Declare.
* match.pd (((A & N) + B) & M -> (A + B) & M): New optimization.
* gcc.dg/tree-ssa/pr86401-1.c: New test.
* gcc.dg/tree-ssa/pr86401-2.c: New test.
* c-c++-common/rotate-9.c: New test.
Jonathan Wakely [Fri, 6 Jul 2018 14:16:13 +0000 (15:16 +0100)]
PR libstdc++/84928 use std::move in <numeric> algorithms
P0616R0 altered the effects of the <numeric> algorithms to use std::move
on the accumulator values (resolving LWG 2055). This implements the
change for C++2a, but retains the previous behaviour for older
standards.
* include/bits/stl_numeric.h (_GLIBCXX_MOVE_IF_20): Define macro to
conditionally move, according to __cplusplus value.
(accumulate, inner_product, partial_sum, adjacent_difference): Use
_GLIBCXX_MOVE_IF_20.
* testsuite/26_numerics/accumulate/lwg2055.cc: New test.
* testsuite/26_numerics/adjacent_difference/lwg2055.cc: New test.
* testsuite/26_numerics/inner_product/lwg2055.cc: New test.
* testsuite/26_numerics/partial_sum/lwg2055.cc: New test.
This is the last remaining piece of P0935R0. This adds a default
constructor to each of the streambuf and stream types in <sstream> so
that default construction does not use the 'explicit' constructor that
has a single, defaulted argument.
Paul Thomas [Thu, 5 Jul 2018 16:27:38 +0000 (16:27 +0000)]
re PR fortran/86408 (bogus error: ABSTRACT INTERFACE must not have an assumed character length result (F2003: C418))
2018-07-05 Paul Thomas <pault@gcc.gnu.org>
PR fortran/86408
* resolve.c.c (resolve_contained_fntype): Reference to C418 is
in F2008 and not F2003.
(resolve_function): Ditto in error message. Also, exclude
deferred character length results from the error.
2018-07-05 Paul Thomas <pault@gcc.gnu.org>
PR fortran/86408
* gfortran.dg/deferred_character_20.f90: New test.
Jonathan Wakely [Thu, 5 Jul 2018 15:56:06 +0000 (16:56 +0100)]
PR libstdc++/58265 implement LWG 2063 for COW strings
For COW strings the default constructor does not allocate when
_GLIBCXX_FULLY_DYNAMIC_STRING == 0, so can be noexcept. The move
constructor and swap do not allocate when the allocators are equal, so
add conditional noexcept using allocator_traits::is_always_equal.
Fritz Reese [Thu, 5 Jul 2018 15:39:27 +0000 (15:39 +0000)]
re PR fortran/83183 (Out of memory with option -finit-derived)
2018-07-05 Fritz Reese <fritzoreese@gmail.com>
gcc/fortran/ChangeLog:
PR fortran/83183
PR fortran/86325
* expr.c (class_allocatable, class_pointer, comp_allocatable,
comp_pointer): New helpers.
(component_initializer): Generate EXPR_NULL for allocatable or pointer
components. Do not generate initializers for components within BT_CLASS.
Do not assign to comp->initializer.
(gfc_generate_initializer): Use new helpers; move code to generate
EXPR_NULL for class allocatable components into component_initializer().
gcc/testsuite/ChangeLog:
PR fortran/83183
PR fortran/86325
* gfortran.dg/init_flag_18.f90: New testcase.
* gfortran.dg/init_flag_19.f03: New testcase.
Carl Love [Thu, 5 Jul 2018 14:48:51 +0000 (14:48 +0000)]
rs6000-c.c: Map ALTIVEC_BUILTIN_VEC_UNPACKH for float argument to VSX_BUILTIN_DOUBLEH_V4SF.
gcc/ChangeLog:
2018-07-05 Carl Love <cel@us.ibm.com>
* config/rs6000/rs6000-c.c: Map ALTIVEC_BUILTIN_VEC_UNPACKH for
float argument to VSX_BUILTIN_DOUBLEH_V4SF.
Map ALTIVEC_BUILTIN_VEC_UNPACKL for float argument to
VSX_BUILTIN_DOUBLEL_V4SF.
gcc/testsuite/ChangeLog:
2018-07-05 Carl Love <cel@us.ibm.com>
* gcc.target/altivec-1-runnable.c: New test file.
* gcc.target/altivec-2-runnable.c: New test file.
* gcc.target/vsx-7.c (main2): Change expected expected instruction
for tests.
Tamar Christina [Thu, 5 Jul 2018 10:31:04 +0000 (10:31 +0000)]
Simplify movmem code by always doing overlapping copies when larger than 8 bytes on AArch64.
This changes the movmem code in AArch64 that does copy for data between 4 and 7
bytes to use the smallest possible mode capable of copying the remaining bytes in one
go and then overlapping the reads if needed.
This means that if we're copying 5 bytes we would issue an SImode and QImode
load instead of two SImode loads.
This does smaller memory accesses but also gives the mid-end a chance to realise
that it can CSE the loads in certain circumstances. e.g. when you have something
like
return foo;
where foo is a struct. This would be transformed by the mid-end into SSA form as
D.XXXX = foo;
return D.XXXX;
This movmem routine will handle the first copy, but it's usually not needed,
the mid-end would do SImode and QImode stores into X0 for the 5 bytes example
but without the first copies being in the same mode, it doesn't know it doesn't
need the stores at all.
PR sanitizer/84250
* config/gnu-user.h (LIBASAN_EARLY_SPEC): Pass -lstdc++ for static
libasan.
* gcc.c: Do not pass LIBUBSAN_SPEC if ASan is enabled with UBSan.
Jonathan Wakely [Wed, 4 Jul 2018 20:15:01 +0000 (21:15 +0100)]
P0646R1 Improving the Return Value of Erase-Like Algorithms I
In C++2a the remove, remove_if and unique members of std::list and
std::forward_list have been changed to return the number of elements
removed. This is an ABI change for the remove members and the
non-template unique members, so an abi-tag is used to give those symbols
new mangled names in C++2a mode. For the function templates the return
type is part of the mangled name so no abi-tag is needed.
* include/bits/forward_list.h (__cpp_lib_list_remove_return_type):
Define.
(forward_list::__remove_return_type): Define typedef as size_type or
void, according to __cplusplus value.
(_GLIBCXX_FWDLIST_REMOVE_RETURN_TYPE_TAG): Define macro as abi-tag or
empty, according to __cplusplus value.
(forward_list::remove, forward_list::unique): Use typedef and macro
to change return type and add abi-tag for C++2a.
(forward_list::remove_if<Pred>, forward_list::unique<BinPred>): Use
typedef to change return type for C++2a.
* include/bits/forward_list.tcc (_GLIBCXX20_ONLY): Define macro.
(forward_list::remove, forward_list::remove_if<Pred>)
(forward_list::unique<BinPred>): Return number of removed elements
for C++2a.
* include/bits/list.tcc (_GLIBCXX20_ONLY): Define macro.
(list::remove, list::unique, list::remove_if<Predicate>)
(list::unique<BinaryPredicate>): Return number of removed elements
for C++2a.
* include/bits/stl_list.h (__cpp_lib_list_remove_return_type): Define.
(list::__remove_return_type): Define typedef as size_type or
void, according to __cplusplus value.
(_GLIBCXX_LIST_REMOVE_RETURN_TYPE_TAG): Define macro as abi-tag or
empty, according to __cplusplus value.
(list::remove, list::unique): Use typedef and macro to change return
type and add abi-tag for C++2a.
(list::remove_if<Predicate>, list::unique<BinaryPredicate>): Use
typedef to change return type for C++2a.
* include/std/version (__cpp_lib_list_remove_return_type): Define.
* testsuite/23_containers/forward_list/operations/
remove_cxx20_return.cc: New.
* testsuite/23_containers/forward_list/operations/
unique_cxx20_return.cc: New.
PR sanitizer/84250
* config/gnu-user.h (LIBASAN_EARLY_SPEC): Pass -lstdc++ for static
libasan.
* gcc.c: Do not pass LIBUBSAN_SPEC if ASan is enabled with UBSan.
The intrinsic doesn't check for allowed conversions between scalar
types, so restore the std::is_constructible check.
Also make some trivial whitespace changes.
PR libstdc++/86398
* include/std/type_traits (is_trivially_constructible): Check
is_constructible before __is_trivially_constructible.
* testsuite/20_util/is_trivially_constructible/value.cc: Add more
tests, including negative cases.
* testsuite/20_util/make_signed/requirements/typedefs_neg.cc: Use
zero for dg-error lineno.
* testsuite/20_util/make_unsigned/requirements/typedefs_neg.cc:
Likewise.
Martin Liska [Wed, 4 Jul 2018 07:51:08 +0000 (07:51 +0000)]
[multiple changes]
2018-07-04 Denys Vlasenko <dvlasenk@redhat.com>
Martin Liska <mliska@suse.cz>
PR middle-end/66240
PR target/45996
PR c/84100
* common.opt: Rename align options with 'str_' prefix.
* common/config/i386/i386-common.c (set_malign_value): New
function.
(ix86_handle_option): Use it to set -falign-* options/
* config/aarch64/aarch64-protos.h (struct tune_params): Change
type from int to string.
* config/aarch64/aarch64.c: Update default values from int
to string.
* config/alpha/alpha.c (alpha_override_options_after_change):
Likewise.
* config/arm/arm.c (arm_override_options_after_change_1): Likewise.
* config/i386/dragonfly.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/freebsd.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/gas.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/gnu-user.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/i386.c (struct ptt): Change type from int to
string.
(ix86_default_align): Set default values.
* config/i386/i386.h (ASM_OUTPUT_MAX_SKIP_PAD): Print
max skip conditionally.
* config/i386/iamcu.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN):
* config/i386/lynx.h (ASM_OUTPUT_MAX_SKIP_ALIGN):
* config/i386/netbsd-elf.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
* config/i386/openbsdelf.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN) Print max skip conditionally.:
* config/i386/x86-64.h (SUBALIGN_LOG): New.
(ASM_OUTPUT_MAX_SKIP_ALIGN): Print
max skip conditionally.
(ASM_OUTPUT_MAX_SKIP_PAD): Likewise.
* config/ia64/ia64.c (ia64_option_override): Set default values
for alignment options.
* config/m68k/m68k.c: Handle new str_align_* options.
* config/mips/mips.c (mips_set_compression_mode): Change
type of constants.
(mips_option_override): Set default values for options.
* config/powerpcspe/powerpcspe.c (rs6000_option_override_internal):
Likewise.
* config/rs6000/rs6000.c (rs6000_option_override_internal):
Likewise.
* config/rx/rx.c (rx_option_override): Likewise.
* config/rx/rx.h (JUMP_ALIGN): Use align_jumps_log.
(LABEL_ALIGN): Use align_labels_log.
(LOOP_ALIGN): Use align_loops_align.
* config/s390/s390.c (s390_asm_output_function_label): Use new
macros.
* config/sh/sh.c (sh_override_options_after_change):
Change type of constants.
* config/spu/spu.c (spu_sched_init): Likewise.
* config/sparc/sparc.c (sparc_option_override): Set default
values for options.
* config/visium/visium.c (visium_option_override): Likewise.
* config/visium/visium.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Do not
emit p2align format with last argument if it's not needed.
* doc/invoke.texi: Document extended format of -falign-*.
* final.c: Use align_labels alignment.
* flags.h (struct target_flag_state): Change type to use
align_flags.
(struct align_flags_tuple): New.
(struct align_flags): Likewise.
(align_loops_log): Redefine macro to use new types.
(align_loops_max_skip): Redefine macro to use new types.
(align_jumps_log): Redefine macro to use new types.
(align_jumps_max_skip): Redefine macro to use new types.
(align_labels_log): Redefine macro to use new types.
(align_labels_max_skip): Redefine macro to use new types.
(align_functions_log): Redefine macro to use new types.
(align_loops): Redefine macro to use new types.
(align_jumps): Redefine macro to use new types.
(align_labels): Redefine macro to use new types.
(align_functions): Redefine macro to use new types.
(align_functions_max_skip): Redefine macro to use new types.
(align_loops_value): New macro.
(align_jumps_value): New macro.
(align_labels_value): New macro.
(align_functions_value): New macro.
* function.c (invoke_set_current_function_hook): Propagate
alignment values from flags to global variables default in
topleev.h.
* ipa-icf.c (sem_function::equals_wpa): Use
cl_optimization_option_eq instead of memcmp.
* lto-streamer.h (cl_optimization_stream_out): Support streaming
of string types.
(cl_optimization_stream_in): Likewise.
* optc-save-gen.awk: Support strings in cl_optimization.
* opth-gen.awk: Likewise.
* opts.c (finish_options): Remove error checking of invalid
value ranges.
(MAX_CODE_ALIGN): Remove.
(MAX_CODE_ALIGN_VALUE): Likewise.
(parse_and_check_align_values): New function.
(check_alignment_argument): Likewise.
(common_handle_option): Use check_alignment_argument.
* opts.h (parse_and_check_align_values): Declare.
* toplev.c (init_alignments): Remove.
(read_log_maxskip): New.
(parse_N_M): Likewise.
(parse_alignment_opts): Likewise.
(backend_init_target): Remove usage of init_alignments.
* toplev.h (parse_alignment_opts): Declare.
* tree-streamer-in.c (streamer_read_tree_bitfields): Add new
argument.
* tree-streamer-out.c (streamer_write_tree_bitfields): Likewise.
* tree.c (cl_option_hasher::equal): New.
* varasm.c: Use new global macros.
2018-07-04 Martin Liska <mliska@suse.cz>
PR middle-end/66240
PR target/45996
PR c/84100
* lto.c (compare_tree_sccs_1): Use cl_optimization_option_eq
instead of memcmp.
2018-07-04 Martin Liska <mliska@suse.cz>
PR middle-end/66240
PR target/45996
PR c/84100
* gcc.dg/pr84100.c (foo):
* gcc.target/i386/falign-functions-2.c: New test.
* gcc.target/i386/falign-functions.c: New test.
H.J. Lu [Wed, 4 Jul 2018 03:01:33 +0000 (03:01 +0000)]
i386: Add indirect_return function attribute
On x86, swapcontext may return via indirect branch when shadow stack
is enabled. To support code instrumentation of control-flow transfers
with -fcf-protection, add indirect_return function attribute to inform
compiler that a function may return via indirect branch.
Note: Unlike setjmp, swapcontext only returns once. Mark it return
twice will unnecessarily disable compiler optimization as shown in
the testcase here.
gcc/
PR target/85620
* config/i386/i386.c (rest_of_insert_endbranch): Also generate
ENDBRANCH for non-tail call which may return via indirect branch.
* doc/extend.texi: Document indirect_return attribute.
Jeff Law [Wed, 4 Jul 2018 01:03:52 +0000 (19:03 -0600)]
h8300.md (ors code_iterator): New.
* config/h8300/h8300.md (ors code_iterator): New.
(bsetqi_msx, bnotqi_msx patterns and splitters): Consolidate into
a single pattern and single splitter.
(bsethi_msx, bnothi_msx patterns): Consolidate into a single pattern.
(iorqi3_1, xorqi3_1): Likewise.
(iorqi3, xorqi3 expanders): Similarly.
Jeff Law [Wed, 4 Jul 2018 00:27:38 +0000 (18:27 -0600)]
h8300.md (movmd_internal_normal): Consolidated with (movmd_internal) into a single pattern using the P mode iterator.
* config/h8300/h8300.md (movmd_internal_normal): Consolidated with
(movmd_internal) into a single pattern using the P mode iterator.
(movmd splitters): Similarly.
(stpcpy_internal_normal, stpcpy_internal): Similarly for thes patterns.
(movsd splitters): Similarly.
Jonathan Wakely [Tue, 3 Jul 2018 21:04:45 +0000 (22:04 +0100)]
P0556R3 Integral power-of-2 operations, P0553R2 Bit operations
P0553R2 is not in the C++2a working draft yet, but is likely to be
approved soon. Neither proposal supports std::byte but this adds
overloads of each function for std::byte, assuming that will also get
added.
* include/Makefile.am: Add new header.
* include/Makefile.in: Regenerate.
* include/precompiled/stdc++.h: Include new header.
* include/std/bit: New header.
(__rotl, __rotr, __countl_zero, __countl_one, __countr_zero)
(__countr_one, __popcount, __ispow2, __ceil2, __floor2, __log2p1):
Define for C++14.
[!__STRICT_ANSI__] (rotl, rotr, countl_zero, countl_one, countr_zero)
(countr_one, popcount): Define for C++2a. Also overload for std::byte.
(ispow2, ceil2, floor2, log2p1): Define for C++2a.
[!__STRICT_ANSI__] (ispow2, ceil2, floor2, log2p1): Overload for
std::byte.
* testsuite/26_numerics/bit/bit.pow.two/ceil2.cc: New.
* testsuite/26_numerics/bit/bit.pow.two/floor2.cc: New.
* testsuite/26_numerics/bit/bit.pow.two/ispow2.cc: New.
* testsuite/26_numerics/bit/bit.pow.two/log2p1.cc: New.
* testsuite/26_numerics/bit/bitops.rot/rotl.cc: New.
* testsuite/26_numerics/bit/bitops.rot/rotr.cc: New.
* testsuite/26_numerics/bit/bitops.count/countl_one.cc: New.
* testsuite/26_numerics/bit/bitops.count/countl_zero.cc: New.
* testsuite/26_numerics/bit/bitops.count/countr_one.cc: New.
* testsuite/26_numerics/bit/bitops.count/countr_zero.cc: New.
Paolo Carlini [Tue, 3 Jul 2018 21:03:51 +0000 (21:03 +0000)]
decl.c (min_location): New.
/cp
2018-07-03 Paolo Carlini <paolo.carlini@oracle.com>
* decl.c (min_location): New.
(smallest_type_quals_location): Use the latter.
(check_concept_fn): Use DECL_SOURCE_LOCATION.
(grokdeclarator): Use accurate locations in a number of error
messages involving ds_thread, ds_storage_class, ds_virtual,
ds_constexpr, ds_typedef and ds_friend; exploit min_location.
/testsuite
2018-07-03 Paolo Carlini <paolo.carlini@oracle.com>
projects / thirdparty / gcc.git / log
