Thomas Huth [Wed, 9 Jul 2025 08:34:40 +0000 (10:34 +0200)]
pc-bios/s390-ccw: Allow up to 31 entries for pxelinux.cfg
We're going to support a menu for the pxelinux.cfg code, and to be able
to reuse some functionality from menu.c, we should align the maximum
amount of possible entries with the MAX_BOOT_ENTRIES constant that is
used there. Thus replace MAX_PXELINUX_ENTRIES with MAX_BOOT_ENTRIES.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250709083443.41574-3-thuth@redhat.com>
Thomas Huth [Wed, 9 Jul 2025 08:34:39 +0000 (10:34 +0200)]
pc-bios/s390-ccw: Allow to select a different pxelinux.cfg entry via loadparm
Since we're linking the network booting code into the main firmware
binary nowadays, we can support the "loadparm" parameter now quite
easily for pxelinux.cfg config files that contain multiple entries.
Reviewed-by: Jared Rossi <jrossi@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20250709083443.41574-2-thuth@redhat.com>
Peter Maydell [Thu, 10 Jul 2025 16:15:52 +0000 (17:15 +0100)]
hw/s390x/s390-pci-bus.c: Use g_assert_not_reached() in functions taking an ett
The s390-pci-bus.c code, Coverity complains about a possible overflow
because get_table_index() can return -1 if the ett value passed in is
not one of the three permitted ZPCI_ETT_PT, ZPCI_ETT_ST, ZPCI_ETT_RT,
but the caller in table_translate() doesn't check this and instead
uses the return value directly in a calculation of the guest address
to read from.
In fact this case cannot happen, because:
* get_table_index() is called only from table_translate()
* the only caller of table_translate() loops through the ett values
in the order RT, ST, PT until table_translate() returns 0
* table_translate() will return 0 for the error cases and when
translate_iscomplete() returns true
* translate_iscomplete() is always true for ZPCI_ETT_PT
So table_translate() is always called with a valid ett value.
Instead of having the various functions called from table_translate()
return a default or dummy value when the ett argument is out of range,
use g_assert_not_reached() to indicate that this is impossible.
Coverity: CID 1547609 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Message-ID: <20250710161552.1287399-1-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
target/s390x/tcg: Use vaddr in s390_probe_access()
Commit 70ebd9ce1cb ("s390x/tcg: Fault-safe memset") passed
vaddr type to access_prepare(), and commit b6c636f2cd6
("s390x/tcg: Fault-safe memmove") to do_access_get_byte(),
but declared S390Access::vaddr[1,2] as target_ulong.
Directly declare these as vaddr type, and have
s390_probe_access() use that type as argument.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250707171059.3064-3-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
target/s390x/kvm: Use vaddr in find/insert_hw_breakpoint()
Since commit b8a6eb1862a both kvm_arch_insert_hw_breakpoint()
and kvm_arch_remove_hw_breakpoint() use a vaddr type. Use the
same type for the callees.
Fixes: b8a6eb1862a ("sysemu/kvm: Use vaddr for kvm_arch_[insert|remove]_hw_breakpoint") Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20250707171059.3064-2-philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
Stefan Hajnoczi [Mon, 7 Jul 2025 13:22:41 +0000 (09:22 -0400)]
Merge tag 'pull-target-arm-20250704' of https://gitlab.com/pm215/qemu into staging
target-arm queue:
* Implement emulation of SME2p1 and SVE2p1
* Correctly enforce alignment checks for v8M loads and
stores done via helper functions
* Mark the "highbank" and the "midway" machine as deprecated
* tag 'pull-target-arm-20250704' of https://gitlab.com/pm215/qemu: (119 commits)
linux-user/aarch64: Set hwcap bits for SME2p1/SVE2p1
target/arm: Enable FEAT_SME2p1 on -cpu max
target/arm: Implement SME2 BFMOPA (non-widening)
target/arm: Implement FMOPA (non-widening) for fp16
target/arm: Support FPCR.AH in SME FMOPS, BFMOPS
target/arm: Rename BFMOPA to BFMOPA_w
target/arm: Rename FMOPA_h to FMOPA_w_h
target/arm: Implement LUTI2, LUTI4 for SME2/SME2p1
target/arm: Implement MOVAZ for SME2p1
target/arm: Implement LD1Q, ST1Q for SVE2p1
target/arm: Implement {LD, ST}[234]Q for SME2p1/SVE2p1
target/arm: Move ld1qq and st1qq primitives to sve_ldst_internal.h
target/arm: Implement {LD1, ST1}{W, D} (128-bit element) for SVE2p1
target/arm: Split the ST_zpri and ST_zprr patterns
target/arm: Implement SME2 counted predicate register load/store
target/arm: Implement TBLQ, TBXQ for SME2p1/SVE2p1
target/arm: Implement ZIPQ, UZPQ for SME2p1/SVE2p1
target/arm: Implement PMOV for SME2p1/SVE2p1
target/arm: Implement EXTQ for SME2p1/SVE2p1
target/arm: Implement DUPQ for SME2p1/SVE2p1
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* tag 'accel-20250704' of https://github.com/philmd/qemu: (35 commits)
MAINTAINERS: Add me as reviewer of overall accelerators section
monitor/hmp-cmds-target: add CPU_DUMP_VPU in hmp_info_registers()
accel/system: Convert pre_resume() from AccelOpsClass to AccelClass
accel: Pass AccelState argument to gdbstub_supported_sstep_flags()
accel: Remove unused MachineState argument of AccelClass::setup_post()
accel: Directly pass AccelState argument to AccelClass::has_memory()
accel/kvm: Directly pass KVMState argument to do_kvm_create_vm()
accel/kvm: Prefer local AccelState over global MachineState::accel
accel/tcg: Prefer local AccelState over global current_accel()
accel/hvf: Re-use QOM allocated state
accel: Propagate AccelState to AccelClass::init_machine()
accel: Keep reference to AccelOpsClass in AccelClass
accel: Expose and register generic_handle_interrupt()
accel/dummy: Extract 'dummy-cpus.h' header from 'system/cpus.h'
accel/whpx: Expose whpx_enabled() to common code
accel/nvmm: Expose nvmm_enabled() to common code
accel/system: Document cpu_synchronize_state_post_init/reset()
accel/system: Document cpu_synchronize_state()
accel/kvm: Remove kvm_cpu_synchronize_state() stub
accel/whpx: Replace @dirty field by generic CPUState::vcpu_dirty field
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Conflicts:
accel/accel-system.c
accel/hvf/hvf-all.c
include/qemu/accel.h
linux-user/aarch64: Set hwcap bits for SME2p1/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-108-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-107-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 4 Jul 2025 14:21:08 +0000 (08:21 -0600)]
target/arm: Implement SME2 BFMOPA (non-widening)
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-106-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 4 Jul 2025 14:21:07 +0000 (08:21 -0600)]
target/arm: Implement FMOPA (non-widening) for fp16
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-105-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For non-widening, we can use float_muladd_negate_product,
For widening, which uses dot-product, we need to handle
the negation explicitly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-104-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 4 Jul 2025 14:21:05 +0000 (08:21 -0600)]
target/arm: Rename BFMOPA to BFMOPA_w
Our current BFMOPA opcode pattern is the widening version
of the insn. Rename it to BFMOPA_w, to make way for
the non-widening version added in SME2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-103-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 4 Jul 2025 14:21:04 +0000 (08:21 -0600)]
target/arm: Rename FMOPA_h to FMOPA_w_h
The pattern we currently have as FMOPA_h is the "widening" insn
that takes fp16 inputs and produces single-precision outputs.
This is unlike FMOPA_s and FMOPA_d, which are non-widening
produce outputs the same size as their inputs.
SME2 introduces a non-widening fp16 FMOPA operation; rename
FMOPA_h to FMOPA_w_h (for 'widening'), so we can use FMOPA_h
for the non-widening version, giving it a name in line with
the other non-widening ops FMOPA_s and FMOPA_d.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-102-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement LUTI2, LUTI4 for SME2/SME2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-101-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-100-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-99-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement {LD, ST}[234]Q for SME2p1/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-98-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Move ld1qq and st1qq primitives to sve_ldst_internal.h
Move from sme_helper.c to the shared header.
Add a comment noting the lack of atomicity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-97-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement {LD1, ST1}{W, D} (128-bit element) for SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-96-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Split the ST_zpri and ST_zprr patterns
The msz > esz encodings are reserved, and some of
them are about to be reused. Split these patterns
so that the new insns do not overlap.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-95-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the SVE2p1 consecutive register LD1/ST1,
and the SME2 strided register LD1/ST1.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-94-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement TBLQ, TBXQ for SME2p1/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-93-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement ZIPQ, UZPQ for SME2p1/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-92-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-91-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-90-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-89-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement CNTP (predicate as counter) for SME2/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-88-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement BFMLSLB{L, T} for SME2/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-87-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement FADDQV, F{MIN, MAX}{NM}QV for SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-86-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement ANDQV, ORQV, EORQV for SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-85-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-84-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-83-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement {ADD, SMIN, SMAX, UMIN, UMAX}QV for SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-82-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SVE2p1 PTRUE (predicate as counter)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-81-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SVE2p1 WHILE (predicate as counter)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-80-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SVE2p1 WHILE (predicate pair)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-79-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-78-richard.henderson@linaro.org
This instruction is present in both SME(1) and SVE2.1 extensions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use TRANS_FEAT to select the correct predicate.
Pass the helper and a boolean to do_WHILE.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-77-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Move scale by esz into helper_sve_while*
Change the API to pass element count rather than bit count.
This will be helpful later for predicate as counter.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-76-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Split out do_whileg from helper_sve_whileg
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-75-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Split out do_whilel from helper_sve_whilel
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-74-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expand to memset plus the return value, when used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-73-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Fold predtest_ones into helper_sve_brkns
Merge predtest_ones into its only caller.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-72-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For WHILE, we have the count of enabled predicates, so we don't
need to search to compute the PredTest result. Reuse the logic
that will shortly be required for counted predicates.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-71-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-70-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the single vector version within SVE decode space.
Tested-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-69-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These instructions are present in both SME(1) and SVE2.1 extensions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-68-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-67-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-66-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-65-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Move do_urshr, do_srshr to vec_internal.h
Unify two copies of these inline functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-64-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-63-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-62-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SQCVTN, UQCVTN, SQCVTUN for SME2/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-61-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-60-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace and remove do_sat_bhs.
This avoids multiple repetitions of INT*_MIN/MAX.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-59-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-58-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-57-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-56-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-55-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-54-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-53-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-52-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-51-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-50-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-49-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Rename gvec_fml[as]_[hs] with _nf_ infix
Emphasize the non-fused nature of these multiply-add.
Matches other helpers such as gvec_rsqrts_nf_[hs].
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-48-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-47-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-46-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SDOT, UDOT (2-way) for SME2/SVE2p1
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-45-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename to USDOT_zzzz_4s and force size=2 during decode.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-44-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-43-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20250704142112.1018902-42-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Rename helper_gvec_*dot_[bh] to *_4[bh]
Emphasize that these are 4-way dot products.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-41-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-40-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-39-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-38-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-37-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-36-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Pass ZA to helper_sve2_fmlal_zz[zx]w_s
Indicate whether to use FPST_FPCR or FPST_ZA via bit 2 of
simd_data(desc). For SVE, this bit remains zero.
For do_FMLAL_zzzw, this requires no change.
For do_FMLAL_zzxw, move the index up one bit.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-35-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-34-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SME2 ADD/SUB (array results, multiple and single vector)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-33-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SME2 Multiple Vectors SVE Destructive
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-32-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Implement SME2 Multiple and Single SVE Destructive
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-31-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-30-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-29-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-28-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-27-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-26-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-25-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prepare for MOVA array to/from vector with multiple registers
by adding a div_len parameter, herein always 1, and a vec_mod
parameter, herein always 0.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-24-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prepare for more kinds of MOVA from SME2 by renaming the
existing SME1 MOVA to indicate tile to/from vector.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-23-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Decode tile number and index offset beforehand and separately.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-21-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-20-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
target/arm: Add alignment argument to gen_sve_{ldr, str}
Honor AlignmentEnforced() for LDR/STR (vector),
(predicate), and (array vector).
Within the expansion functions, clear @align when we're
done emitting loads at the largest size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-19-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-18-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pipe the value through from SMCR_ELx through hflags and into
the disassembly context. Enable EZT0 in smcr_write.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-17-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a 512-bit array introduced with SME2.
Save it only when ZA is in use.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250704142112.1018902-16-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
projects / thirdparty / qemu.git / log
