Hans de Goede [Tue, 14 Oct 2025 17:40:11 +0000 (19:40 +0200)]
media: i2c: ov01a10: Fix analogue gain range
A analogue maximum gain of 0xffff / 65525 seems unlikely and testing
indeed shows that the gain control wraps-around at 16383, so set the
maximum gain to 0x3fff / 16383.
The minimum gain of 0x100 is correct. Setting bits 8-11 to 0x0 results
in the same gain values as setting these bits to 0x1, with bits 0-7
still increasing the gain when going from 0x000 - 0x0ff in the exact
same range as when going from 0x100 - 0x1ff.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hansg@kernel.org> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
[Sakari Ailus: mention analogue gain and update the limit from 4096.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans de Goede [Tue, 14 Oct 2025 17:40:09 +0000 (19:40 +0200)]
media: i2c: ov01a10: Fix the horizontal flip control
During sensor calibration I noticed that with the hflip control set
to false/disabled the image was mirrored.
So it seems that the horizontal flip control is inverted and needs to
be set to 1 to not flip (just like the similar problem recently fixed
on the ov08x40 sensor).
Invert the hflip control to fix the sensor mirroring by default.
As the comment above the newly added OV01A10_MEDIA_BUS_FMT define explains
the control being inverted also means that the native Bayer-order of
the sensor actually is GBRG not BGGR, but so as to not break userspace
the Bayer-order is kept at BGGR.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hansg@kernel.org> Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315 Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: iris: Add internal buffer calculation for AV1 decoder
Implement internal buffer count and size calculations for AV1 decoder
for all the buffer types required by the AV1 decoder, including BIN,
COMV, PERSIST, LINE, and PARTIAL.
This ensures the hardware decoder has properly allocated memory for AV1
decoding operations, enabling correct AV1 video playback.
media: iris: Add support for AV1 format in iris decoder
Extend iris decoder driver to support format V4L2_PIX_FMT_AV1.
This change updates the format enumeration (VIDIOC_ENUM_FMT)
and allows setting AV1 format via VIDIOC_S_FMT for gen2 and beyond.
Gen1 iris hardware decoder does not support AV1 format.
media: uapi: videodev2: Add support for AV1 stateful decoder
Introduce a new pixel format, V4L2_PIX_FMT_AV1, to the
Video4Linux2(V4L2) API. This format is intended for AV1
bitstreams in stateful decoding/encoding workflows.
The fourcc code 'AV10' is used to distinguish
this format from the existing V4L2_PIX_FMT_AV1_FRAME,
which is used for stateless AV1 decoder implementation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com> Tested-by: Val Packett <val@packett.cool> Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
A user has reported that the Zoom Video Conferencing tool is not capable
of handling invalid frames. Due to this, he has to continue using this
parameter.
We will keep working with Zoom so they can handle invalid frames
correctly, but for this cycle the safest option is to revert this
parameter drop.
Sun Jian [Fri, 2 Jan 2026 11:45:01 +0000 (19:45 +0800)]
staging: media: tegra-video: move tegra20_vip_soc declaration to vip.h
tegra20_vip_soc is shared across translation units but is currently
declared via an extern in vip.c. Move the declaration to vip.h so users get
it via the header and we avoid extern declarations in .c files, matching
the pattern already used by tegra20_vi_soc and tegra210_vi_soc.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Sun Jian [Fri, 2 Jan 2026 11:45:00 +0000 (19:45 +0800)]
staging: media: tegra-video: move tegra210_csi_soc declaration to csi.h
Sparse warns that tegra210_csi_soc is not declared in tegra210.c.
The symbol is referenced from csi.c, so it must remain global. Move the
declaration to csi.h so users see it via the header and avoid extern
declarations in .c files.
SPARSE: drivers/staging/media/tegra-video/tegra210.c:1214:28: warning:
symbol 'tegra210_csi_soc' was not declared. Should it be static?
No functional change intended.
Suggested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Abdun Nihaal [Tue, 23 Dec 2025 05:49:01 +0000 (11:19 +0530)]
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org Fixes: a000e9a02b58 ("[media] tw9906: add Techwell tw9906 video decoder") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Abdun Nihaal [Tue, 23 Dec 2025 05:48:13 +0000 (11:18 +0530)]
media: i2c/tw9903: Fix potential memory leak in tw9903_probe()
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
Cc: stable@vger.kernel.org Fixes: 0890ec19c65d ("[media] tw9903: add new tw9903 video decoder") Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Szymon Wilczek [Sat, 20 Dec 2025 18:24:19 +0000 (19:24 +0100)]
media: pvrusb2: fix URB leak in pvr2_send_request_ex
When pvr2_send_request_ex() submits a write URB successfully but fails to
submit the read URB (e.g. returns -ENOMEM), it returns immediately without
waiting for the write URB to complete. Since the driver reuses the same
URB structure, a subsequent call to pvr2_send_request_ex() attempts to
submit the still-active write URB, triggering a 'URB submitted while
active' warning in usb_submit_urb().
Fix this by ensuring the write URB is unlinked and waited upon if the read
URB submission fails.
Reported-by: syzbot+405dcd13121ff75a9e16@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=405dcd13121ff75a9e16 Signed-off-by: Szymon Wilczek <szymonwilczek@gmx.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Kees Cook [Fri, 12 Dec 2025 03:00:35 +0000 (19:00 -0800)]
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
Link: https://github.com/ClangBuiltLinux/linux/issues/2144 Suggested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix checkpatch warning for is_tw286x]
Dmitry Osipenko [Wed, 10 Dec 2025 16:00:06 +0000 (19:00 +0300)]
media: synopsys: hdmirx: Detect broken interrupt
Downstream version of RK3588 U-Boot uses customized TF-A that remaps
HDMIRX hardware interrupt, routing it via firmware that isn't supported
by upstream driver.
Detect broken interrupt and print a clarifying error message about a need
to use open-source TF-A with this driver.
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 10 Dec 2025 08:52:30 +0000 (16:52 +0800)]
media: cx25821: Add missing unmap in snd_cx25821_hw_params()
In error path, add cx25821_alsa_dma_unmap() to release the
resource acquired by cx25821_alsa_dma_map()
Fixes: 8d8e6d6005de ("[media] cx28521: drop videobuf abuse in cx25821-alsa") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 10 Dec 2025 03:02:17 +0000 (11:02 +0800)]
media: cx23885: Add missing unmap in snd_cx23885_hw_params()
In error path, add cx23885_alsa_dma_unmap() to release the
resource acquired by cx23885_alsa_dma_map().
Fixes: 9529a4b0cf49 ("[media] cx23885: drop videobuf abuse in cx23885-alsa") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 10 Dec 2025 02:53:48 +0000 (10:53 +0800)]
media: cx88: Add missing unmap in snd_cx88_hw_params()
In error path, add cx88_alsa_dma_unmap() to release
resource acquired by cx88_alsa_dma_map().
Fixes: b2c75abde0de ("[media] cx88: drop videobuf abuse in cx88-alsa") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Shaurya Rane [Wed, 26 Nov 2025 19:04:10 +0000 (00:34 +0530)]
media: radio-keene: fix memory leak in error path
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized.
Reported-by: syzbot+a41b73dce23962a74c72@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=a41b73dce23962a74c72 Fixes: 1bf20c3a0c61 ("[media] radio-keene: add a driver for the Keene FM Transmitter") Cc: stable@vger.kernel.org Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: adv7180: fix frame interval in progressive mode
The ADV7280-M may internally convert interlaced video input to
progressive video. If this mode is enabled, the ADV7280-M delivers
progressive video frames at the field rate of 50 fields per second (PAL)
or 60 fields per second (NTSC).
Fix the reported frame interval if progressive video is enabled.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Michael Tretter [Tue, 25 Nov 2025 14:29:54 +0000 (15:29 +0100)]
media: dt-bindings: adi,adv7180: add VPP and CSI register maps
Different variants of the ADV7280 chip have up to three register maps.
The availability of the CSI and VPP register maps depends on the chip
variant. The address of the additional register maps depends on the
board design and other chips on the I2C but. They may be programmed via
registers in the main register map.
Allow to specify the addresses of the VPP and CSI register maps in the
device tree to solve I2C address conflicts on a board level.
The CSI and VPP register maps are always optional to allow backwards
compatibility with existing device trees which may rely on the default
address.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jammy Huang [Mon, 24 Nov 2025 03:05:14 +0000 (11:05 +0800)]
media: aspeed: Fix dram hang at res-change
Dram hang could happen in the steps below:
1. start capture/compression
2. out-of-lock watchdog raise irq because of res-change.
3. aspeed_video_irq_res_change do clk-off
At step3, capture/compression could be not accomplished yet. If clk-off
in the middle of video operation, dram controller could hang at ast2500.
Use reset rather than clk-off/on to avoid this problem.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Zilin Guan [Fri, 14 Nov 2025 09:12:57 +0000 (09:12 +0000)]
media: tegra-video: Fix memory leak in __tegra_channel_try_format()
The state object allocated by __v4l2_subdev_state_alloc() must be freed
with __v4l2_subdev_state_free() when it is no longer needed.
In __tegra_channel_try_format(), two error paths return directly after
v4l2_subdev_call() fails, without freeing the allocated 'sd_state'
object. This violates the requirement and causes a memory leak.
Fix this by introducing a cleanup label and using goto statements in the
error paths to ensure that __v4l2_subdev_state_free() is always called
before the function returns.
Fixes: 56f64b82356b7 ("media: tegra-video: Use zero crop settings if subdev has no get_selection") Fixes: 1ebaeb09830f3 ("media: tegra-video: Add support for external sensor capture") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Shrikant Raskar [Fri, 31 Oct 2025 16:56:45 +0000 (22:26 +0530)]
media: saa6588: Remove dprintk macro and use v4l2_info()
The existing 'dprintk' macro used an unwrapped 'if' statement which was
flagged by checkpatch, but instead of wrapping it, the debug handling
can be simplified.
This patch removes the 'dprintk' macro entirely and replaces all its
usages with v4l2_info() helper. The unused 'PREFIX' macro is also
removed.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Lukas Bulwahn [Wed, 29 Oct 2025 11:06:23 +0000 (12:06 +0100)]
MAINTAINERS: adjust file entry in MEDIATEK MDP DRIVER
Commit fbf97d6c1dd4 ("dt-bindings: media: Convert MediaTek mt8173-mdp
bindings to DT schema") renames mediatek-mdp.txt to
mediatek,mt8173-mdp.yaml as part of this dt-binding conversion, but misses
to adjust the file entry in MEDIATEK MDP DRIVER.
Adjust the file entry after the conversion.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com> Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: verisilicon: AV1: Set IDR flag for intra_only frame type
Intra_only frame could be considered as a key frame so Instantaneous
Decoding Refresh (IDR) flag must be set of the both case and not only
for key frames.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com> Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") Cc: stable@vger.kernel.org Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: mediatek: vcodec: Discard pm_runtime_put() return value
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update mtk_vcodec_enc_pw_off() and mtk_vcodec_dec_pw_off()
to simply discard the return value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Alper Ak [Sat, 27 Dec 2025 08:40:37 +0000 (11:40 +0300)]
media: rockchip: rga: Fix possible ERR_PTR dereference in rga_buf_init()
rga_get_frame() can return ERR_PTR(-EINVAL) when buffer type is
unsupported or invalid. rga_buf_init() does not check the return value
and unconditionally dereferences the pointer when accessing f->size.
Add proper ERR_PTR checking and return the error to prevent
dereferencing an invalid pointer.
Fixes: 6040702ade23 ("media: rockchip: rga: allocate DMA descriptors per buffer") Cc: stable@vger.kernel.org Signed-off-by: Alper Ak <alperyasinak1@gmail.com> Reviewed-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ming Qian [Tue, 23 Dec 2025 06:27:52 +0000 (14:27 +0800)]
media: amphion: Drop min_queued_buffers assignment
The min_queued_buffers field controls when start_streaming() is called
by the vb2 core (it delays the callback until at least N buffers are
queued). Setting it to 1 affects the timing of start_streaming(), which
breaks the seek flow in decoder scenarios and causes test failures.
The current driver implementation does not rely on this minimum buffer
requirement and handles streaming start correctly with the default
value of 0, so remove these assignments.
Fixes: 3cd084519c6f ("media: amphion: add vpu v4l2 m2m support") Cc: stable@vger.kernel.org Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ming Qian [Mon, 22 Dec 2025 08:49:10 +0000 (16:49 +0800)]
media: amphion: Use kmalloc instead of vmalloc
Replace vmalloc/vfree with kmalloc/kfree for allocating small
driver structures (vpu_inst, vdec_t, venc_t, vpu_cmd_t, and
frame objects).
vmalloc() is designed for large memory allocations and incurs
unnecessary overhead for small objects due to virtual memory
mapping. kmalloc() is more appropriate as it allocates physically
contiguous memory with lower overhead.
ftrace measurements of vpu_alloc_cmd() show significant improvement:
Before (vmalloc): 35-72 us (avg ~45.7 us)
After (kmalloc): 11-26 us (avg ~16.8 us)
This reduces allocation time by approximately 63%.
No functional changes are intended.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ming Qian [Wed, 17 Dec 2025 03:02:23 +0000 (11:02 +0800)]
media: amphion: Trigger source change if colorspace changed
After encountering a colorspace change in the stream, the decoder
sends a V4L2_EVENT_SOURCE_CHANGE event with changes set to
V4L2_EVENT_SRC_CH_RESOLUTION.
Then the client can detect and handle the colorspace change without any
buffer reallocation
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ming Qian [Wed, 17 Dec 2025 03:02:22 +0000 (11:02 +0800)]
media: amphion: Clear last_buffer_dequeued flag for DEC_CMD_START
The V4L2_DEC_CMD_START command may be used to handle the dynamic source
change, which will triggers an implicit decoder drain.
The last_buffer_dequeued flag is set in the implicit decoder drain,
so driver need to clear it to continue the following decoding flow.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ming Qian [Wed, 17 Dec 2025 03:02:21 +0000 (11:02 +0800)]
media: docs: dev-decoder: Trigger dynamic source change for colorspace
If colorspace changes, the client needs to renegotiate the pipeline,
otherwise the decoded frame may not be displayed correctly.
So add colorspace as a trigger parameter for dynamic resolution change.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a v4l2 subdevice driver for the Omnivision OS05B10 sensor.
The Omnivision OS05B10 image sensor with an active
array size of 2592 x 1944.
The following features are supported:
- Manual exposure an gain control support
- vblank/hblank control support
- Supported resolution: 2592 x 1944 @ 60fps (SBGGR10)
Co-developed-by: Elgin Perumbilly <elgin.perumbilly@siliconsignals.io> Signed-off-by: Elgin Perumbilly <elgin.perumbilly@siliconsignals.io> Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: i2c: Add Samsung S5K3M5 13MP camera sensor driver
Samsung S5K3M5 (ISOCELL 3M5) is a 13MP image sensor, it produces
Bayer GRBG (2x2) frames in RAW10 output format, the maximum supported
output resolution is 4208x3120 at 30 frames per second.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5K3M5 image sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Samsung S5KJN1 is a 50MP image sensor, it produces Bayer GRBG (2x2)
frames in RAW10 output format, the maximum supported output resolution
is 8160x6144 at 10 frames per second.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add device tree bindings documentation for Samsung S5KJN1 image sensor.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After kthread creation during probe sequence, a handful of other
failures could occur. If this were to happen, the kthread is never
explicitly deleted which results in a resource leak. Add explicit cleanup
of this resource.
Signed-off-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: platform: mtk-mdp3: add WQ_PERCPU to alloc_workqueue users
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Marco Crivellari <marco.crivellari@suse.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
AV1 specification describes 3 possibles tx modes: 4x4 only, largest and
select. The hardware allows 5 possibles tx modes: 4x4 only, 8x8, 16x16,
32x32 and select. Since the both aren't exactly matching we need to add
a mapping function to set the correct mode on hardware.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") Cc: stable@vger.kernel.org Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If all the fields of the CDEF parameters are zero (which is the default),
then av1_enable_cdef register needs to be unset
(despite the V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF possibly being set).
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Fixes: 727a400686a2c ("media: verisilicon: Add Rockchip AV1 decoder") Cc: stable@vger.kernel.org Reported-by: Jianfeng Liu <liujianfeng1994@gmail.com> Closes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/4786 Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: dropped Link tag since it just duplicated the Closes: URL]
Ming Qian [Fri, 5 Dec 2025 01:54:26 +0000 (09:54 +0800)]
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling.
Fixes: cb5dd5a0fa518 ("media: hantro: Introduce G2/HEVC decoder") Cc: stable@vger.kernel.org Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: v4l2-mem2mem: Add a kref to the v4l2_m2m_dev structure
Adding a reference count to the v4l2_m2m_dev structure allow safely
sharing it across multiple hardware nodes. This can be used to prevent
running jobs concurrently on m2m cores that have some internal resource
sharing.
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typos in v4l2_m2m_put documentation]
Nicolas Dufresne [Fri, 28 Nov 2025 19:16:16 +0000 (14:16 -0500)]
media: mediatek: vcodec: Don't try to decode 422/444 VP9
This is not supported by the hardware and trying to decode
these leads to LAT timeout errors.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Rework how requests are completed in the MediaTek VCodec driver, by
implementing the new manual request completion feature, which allows to
keep a request open while allowing to add new bitstream data.
This is useful in this case, because the hardware has a LAT and a core
decode work, after the LAT decode the bitstream isn't required anymore
so the source buffer can be set done and the request stays open until
the core decode work finishes.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Co-developed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans Verkuil [Fri, 28 Nov 2025 19:16:12 +0000 (14:16 -0500)]
media: mc: add manual request completion
By default when the last request object is completed, the whole
request completes as well.
But sometimes you want to delay this completion to an arbitrary point in
time so add a manual complete mode for this.
In req_queue the driver marks the request for manual completion by
calling media_request_mark_manual_completion, and when the driver
wants to manually complete the request it calls
media_request_manual_complete().
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Zilin Guan [Tue, 11 Nov 2025 14:57:06 +0000 (14:57 +0000)]
media: chips-media: wave5: Fix memory leak on codec_info allocation failure
In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is
allocated via kzalloc(). If the subsequent allocation for inst->codec_info
fails, the functions return -ENOMEM without freeing the previously
allocated instance, causing a memory leak.
Fix this by calling kfree() on the instance in this error path to ensure
it is properly released.
Fixes: 9707a6254a8a6 ("media: chips-media: wave5: Add the v4l2 layer") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jackson Lee [Wed, 19 Nov 2025 06:25:49 +0000 (15:25 +0900)]
media: chips-media: wave5: Improve performance of decoder
The current decoding method was to wait until each frame was
decoded after feeding a bitstream. As a result, performance was low
and Wave5 could not achieve max pixel processing rate.
Update driver to use an asynchronous approach for decoding and feeding a
bitstream in order to achieve full capabilities of the device.
WAVE5 supports command-queueing to maximize performance by pipelining
internal commands and by hiding wait cycle taken to receive a command
from Host processor.
Instead of waiting for each command to be executed before sending the
next command, Host processor just places all the commands in the
command-queue and goes on doing other things while the commands in the
queue are processed by VPU.
While Host processor handles its own tasks, it can receive VPU interrupt
request (IRQ).
In this case, host processor can simply exit interrupt service routine
(ISR) without accessing to host interface to read the result of the
command reported by VPU.
After host processor completed its tasks, host processor can read the
command result when host processor needs the reports and does
response processing.
To achieve this goal, the device_run() calls v4l2_m2m_job_finish
so that next command can be sent to VPU continuously, if there is
any result, then irq is triggered and gets decoded frames and returns
them to upper layer.
Theses processes work independently each other without waiting
a decoded frame.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jackson Lee [Wed, 19 Nov 2025 06:25:48 +0000 (15:25 +0900)]
media: chips-media: wave5: Add WARN_ON to check if dec_output_info is NULL
The dec_output_info should not be a null pointer, WARN_ON around it to
indicates a driver issue.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Jackson Lee [Wed, 19 Nov 2025 06:25:47 +0000 (15:25 +0900)]
media: chips-media: wave5: Fix Null reference while testing fluster
When multi instances are created/destroyed, many interrupts happens
and structures for decoder are removed.
"struct vpu_instance" this structure is shared for all flow in the decoder,
so if the structure is not protected by lock, Null dereference
could happens sometimes.
IRQ Handler was spilt to two phases and Lock was added as well.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fixes: 2092b3833487 ("media: chips-media: wave5: Support runtime suspend/resume") Cc: stable@vger.kernel.org Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Brandon Brnich <b-brnich@ti.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xulin Sun [Thu, 4 Dec 2025 09:41:53 +0000 (17:41 +0800)]
media: chips-media: wave5: Fix device cleanup order to prevent kernel panic
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9d503201ff94168008b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Xulin Sun <xulin.sun@windriver.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Xulin Sun [Thu, 4 Dec 2025 09:41:52 +0000 (17:41 +0800)]
media: chips-media: wave5: Fix kthread worker destruction in polling mode
Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings
during module removal. Cancel the hrtimer before destroying the kthread
worker to ensure work queues are empty.
In polling mode, the driver uses hrtimer to periodically trigger
wave5_vpu_timer_callback() which queues work via kthread_queue_work().
The kthread_destroy_worker() function validates that both work queues
are empty with WARN_ON(!list_empty(&worker->work_list)) and
WARN_ON(!list_empty(&worker->delayed_work_list)).
The original code called kthread_destroy_worker() before hrtimer_cancel(),
creating a race condition where the timer could fire during worker
destruction and queue new work, triggering the WARN_ON.
This causes the following warning on every module unload in polling mode:
Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in
the remove path to properly pair with pm_runtime_use_autosuspend() from
probe. This allows pm_runtime_disable() to handle reference count cleanup
correctly regardless of current suspend state.
The driver calls pm_runtime_put_sync() unconditionally in remove, but the
device may already be suspended due to autosuspend configured in probe.
When autosuspend has already suspended the device, the usage count is 0,
and pm_runtime_put_sync() decrements it to -1.
This causes the following warning on module unload:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430
kthread_destroy_worker+0x84/0x98
...
vdec 30210000.video-codec: Runtime PM usage count underflow!
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer") Cc: stable@vger.kernel.org Signed-off-by: Xulin Sun <xulin.sun@windriver.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Brandon Brnich [Tue, 21 Oct 2025 20:46:18 +0000 (15:46 -0500)]
media: chips-media: wave5: Process ready frames when CMD_STOP sent to Encoder
CMD_STOP being sent to encoder before last job is executed by device_run
can lead to an occasional dropped frame. Ensure that remaining ready
buffers are drained by making a call to v4l2_m2m_try_schedule.
Signed-off-by: Brandon Brnich <b-brnich@ti.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Brandon Brnich [Tue, 21 Oct 2025 20:46:17 +0000 (15:46 -0500)]
media: chips-media: wave5: Fix conditional in start_streaming
When STREAMON(CAP) is called after STREAMON(OUT), the driver was failing to
switch states from VPU_INST_STATE_OPEN to VPU_INST_STATE_INIT_SEQ and
VPU_INST_STATE_PIC_RUN because the capture queue streaming boolean had not
yet been set to true. This led to a hang in the encoder since the state
was stuck in VPU_INST_STATE_OPEN. During the second call to
start_streaming, the sequence initialization and frame buffer allocation
should occur.
Signed-off-by: Brandon Brnich <b-brnich@ti.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Marek Vasut [Fri, 17 Oct 2025 15:58:38 +0000 (17:58 +0200)]
media: imx-jpeg: Add support for descriptor allocation from SRAM
Add support for optional allocation of bitstream descriptors from SRAM
instead of DRAM. In case the encoder/decoder DT node contains 'sram'
property which points to 'mmio-sram', the driver will attempt to use
the SRAM instead of DRAM for descriptor allocation, which might improve
performance.
This also helps on i.MX95 rev.A with sporadic SLOTn_STATUS IMG_RD_ERR
bit 11 being triggered during JPEG encoding, which is caused by a bug
fixed on later SoC revisions. The bug occurs less often when using the
SRAM for descriptor storage, but is not entirely mitigated. The following
pipeline triggers the bug when descriptors get allocated from DRAM, the
pipeline often hangs after a few seconds and the encoder driver indicates
"timeout, cancel it":
Tested-by: Ming Qian <ming.qian@oss.nxp.com> Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Marek Vasut [Fri, 17 Oct 2025 15:58:37 +0000 (17:58 +0200)]
media: dt-bindings: nxp,imx8-jpeg: Document optional SRAM support
Document optional phandle to mmio-sram, which can describe an SRAM
region used for descriptor storage instead of regular DRAM region.
Use of SRAM instead of DRAM for descriptor storage may improve bus
access pattern and performance.
Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 8 Oct 2025 09:01:56 +0000 (17:01 +0800)]
media: mtk-mdp: Fix a reference leak bug in mtk_mdp_remove()
In mtk_mdp_probe(), vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put()
to prevent reference leak.
Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Haoxiang Li [Wed, 8 Oct 2025 08:55:03 +0000 (16:55 +0800)]
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak.
Fixes: c8eb2d7e8202 ("[media] media: Add Mediatek MDP Driver") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a comment to the vpu_get_plat_device() documentation to make it
clear that the VPU platform device is returned with an incremented
reference count (which needs to be dropped after use).
Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Qianfeng Rong [Sun, 7 Sep 2025 09:35:57 +0000 (17:35 +0800)]
media: mediatek: vcodec: use = { } instead of memset()
Based on testing and recommendations by David Lechner et al. [1][2],
using = { } to initialize a structure or array is the preferred way
to do this in the kernel.
Converts memset() to = { }, thereby:
- Eliminating the risk of sizeof() mismatches.
- Simplifying the code.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
UNINIT checker finds some instances of variables that are used
without being initialized, for example using the uninitialized
value enc_result.is_key_frm can result in unpredictable behavior,
so initialize these variables after declaring.
Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver") Cc: stable@vger.kernel.org Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans Verkuil [Wed, 30 Apr 2025 07:27:50 +0000 (09:27 +0200)]
media: omap3isp: implement enum_fmt_vid_cap/out
Add missing ioctls. This makes v4l2-compliance happier:
fail: v4l2-test-formats.cpp(516): pixelformat 59565955 (UYVY) for buftype 1 not reported by ENUM_FMT
test VIDIOC_G_FMT: FAIL
fail: v4l2-test-formats.cpp(516): pixelformat 59565955 (UYVY) for buftype 1 not reported by ENUM_FMT
test VIDIOC_TRY_FMT: FAIL
fail: v4l2-test-formats.cpp(516): pixelformat 56595559 (YUYV) for buftype 1 not reported by ENUM_FMT
test VIDIOC_S_FMT: FAIL
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Media Driver Info:
Driver name : omap3isp
Model : TI OMAP3 ISP
Serial :
Bus info : platform:480bc000.isp
Media version : 6.17.0
Hardware revision: 0x000000f0 (240)
Driver version : 6.17.0
Required ioctls:
test MEDIA_IOC_DEVICE_INFO: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/media0 open: OK
test MEDIA_IOC_DEVICE_INFO: OK
test for unlimited opens: OK
Media Controller ioctls:
fail: v4l2-test-media.cpp(108): function == MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN
fail: v4l2-test-media.cpp(196): checkFunction(ent.function, true)
test MEDIA_IOC_G_TOPOLOGY: FAIL
fail: v4l2-test-media.cpp(398): num_data_links != num_links
test MEDIA_IOC_ENUM_ENTITIES/LINKS: FAIL
test MEDIA_IOC_SETUP_LINK: OK
Total for omap3isp device /dev/media0: 8, Succeeded: 6, Failed: 2, Warnings: 0
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Ricardo Ribalda [Wed, 19 Nov 2025 19:37:13 +0000 (19:37 +0000)]
media: uvcvideo: Document how to format GUIDs
Manual formatting the GUIDs can lead to errors, document a
programmatically way to format the GUIDs from lsusb into something that
the driver can use.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Wed, 19 Nov 2025 19:37:10 +0000 (19:37 +0000)]
media: uvcvideo: Remove nodrop parameter
We announced the deprecation intentions one year ago in the commit
commit 40ed9e9b2808 ("media: uvcvideo: Announce the user our deprecation
intentions").
We have not hear any complains, lets remove the nodrop parameter.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In Video4Linux, a negative value in V4L2_CID_ZOOM_CONTINUOUS,
V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED indicates a movement in the
"opposite" direction to the standard direction.
Currently, we were using -UVC_GET_MIN as the negative value, which
resulted in the camera moving in the slowest possible speed.
Quirk the driver to return -UVC_GET_MAX for the affected controls.
Note that the get/set function from the mapping cannot be used for
this, because we need to use the information from GET_MAX for GET_MIN
and hacking uvc_ctrl_populate_cache seems like a worse alternative.
Signed-off-by: John Bauer <johnebgood@securitylive.com> Signed-off-by: Gergo Koteles <soyer@irl.hu> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Ricardo Ribalda [Wed, 19 Nov 2025 20:17:36 +0000 (20:17 +0000)]
media: uvcvideo: Fix support for V4L2_CTRL_FLAG_HAS_WHICH_MIN_MAX
The VIDIOC_G_EXT_CTRLS with which V4L2_CTRL_WHICH_(MIN|MAX)_VAL can only
work for controls that have previously announced support for it.
This patch fixes the following v4l2-compliance error:
info: checking extended control 'User Controls' (0x00980001)
fail: v4l2-test-controls.cpp(980): ret != EINVAL (got 13)
test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
Fixes: 39d2c891c96e ("media: uvcvideo: support V4L2_CTRL_WHICH_MIN/MAX_VAL") Cc: stable@vger.kernel.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The uvcvideo driver uses a uvc_dbg() macro that supports enabling debug
message categories selectively, and prints a KERN_DEBUG message. The
macro is used through the driver, but one direct dev_dbg() call creeped
in. Replace it with uvc_dbg().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Hans de Goede <hansg@kernel.org> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:39 +0000 (08:57 +0200)]
media: vb2: drop wait_prepare/finish callbacks
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue
lock field is always set and use that lock when waiting for buffers to
arrive.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:37 +0000 (08:57 +0200)]
media: dvb-core: dvb_vb2: drop wait_prepare/finish callbacks
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &ctx->mutex, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:36 +0000 (08:57 +0200)]
media: dvb-core/dmxdev: drop locks around mmap()
vb2 no longer requires locking around mmap since commit f035eb4e976e ("[media] videobuf2: fix lockdep warning").
Since the streaming I/O mode for DVB support is by default off, and
the dvb utilities were never updated with streaming support, and
we never had regression tests for this streaming mode, this was
never noticed before.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil [Thu, 5 Jun 2025 06:57:35 +0000 (08:57 +0200)]
media: dvb-core: dmxdevfilter must always flush bufs
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
projects / thirdparty / kernel / linux.git / log
