Tested-by: Yunke Cao <yunkec@google.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-15-5900a9fed613@chromium.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of an error, ublk's ->uring_cmd() functions currently return
-EIOCBQUEUED and immediately call io_uring_cmd_done(). -EIOCBQUEUED and
io_uring_cmd_done() are intended for asynchronous completions. For
synchronous completions, the ->uring_cmd() function can just return the
negative return code directly. This skips io_uring_cmd_del_cancelable(),
and deferring the completion to task work. So return the error code
directly from __ublk_ch_uring_cmd() and ublk_ctrl_uring_cmd().
Update ublk_ch_uring_cmd_cb(), which currently ignores the return value
from __ublk_ch_uring_cmd(), to call io_uring_cmd_done() for synchronous
completions.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20250225212456.2902549-1-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The null_blk configfs file 'features' provides a string that lists
available null_blk features for userspace programs to reference.
The string is defined as a long constant in the code, which tends to be
forgotten for updates. It also causes checkpatch.pl to report
"WARNING: quoted string split across lines".
To avoid these drawbacks, generate the feature string on the fly. Refer
to the ca_name field of each element in the nullb_device_attrs table and
concatenate them in the given buffer. Also, sorted nullb_device_attrs
table elements in alphabetical order.
Of note is that the feature "index" was missing before this commit.
This commit adds it to the generated string.
Suggested-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20250226100613.1622564-2-shinichiro.kawasaki@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
None of the few drivers still using the legacy block layer bounce
buffering support integrity metadata. Explicitly mark the features as
incompatible and stop creating the slab and mempool for integrity
buffers for the bounce bio_set.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Anuj Gupta <anuj20.g@samsung.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20250225154449.422989-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the first ioctl() path, rtentry_to_fib_config() checks the prefix
length with bad_mask(). Also, fib_magic() always passes the correct
prefix: 32 or ifa->ifa_prefixlen, which is already validated.
Let's move fib_valid_key_len() to the rtnetlink path, rtm_to_fib_config().
While at it, 2 direct returns in rtm_to_fib_config() are changed to
goto to match other places in the same function
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250228042328.96624-12-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bound scsi_logging_level sysctl writings between SYSCTL_ZERO and
SYSCTL_INT_MAX.
The proc_handler has thus been updated to proc_dointvec_minmax.
Signed-off-by: Nicolas Bouchinet <nicolas.bouchinet@ssi.gouv.fr> Link: https://lore.kernel.org/r/20250224095826.16458-5-nicolas.bouchinet@clip-os.org Reviewed-by: Joel Granados <joel.granados@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
PC speaker works well on this platform in BIOS and in Linux until sound
card drivers are loaded. Then it stops working.
There seems to be a beep generator node at 0x1a in this CODEC
(ALC269_TYPE_ALC215) but it seems to be only connected to capture mixers
at nodes 0x22 and 0x23.
If I unmute the mixer input for 0x1a at node 0x23 and start recording
from its "ALC285 Analog" capture device I can clearly hear beeps in that
recording.
So the beep generator is indeed working properly, however I wasn't able to
figure out any way to connect it to speakers.
However, the bits in the "Passthrough Control" register (0x36) seems to
work at least partially: by zeroing "B" and "h" and setting "S" I can at
least make the PIT PC speaker output appear either in this laptop speakers
or headphones (depending on whether they are connected or not).
There are some caveats, however:
* If the CODEC gets runtime-suspended the beeps stop so it needs HDA beep
device for keeping it awake during beeping.
* If the beep generator node is generating any beep the PC beep passthrough
seems to be temporarily inhibited, so the HDA beep device has to be
prevented from using the actual beep generator node - but the beep device
is still necessary due to the previous point.
* In contrast with other platforms here beep amplification has to be
disabled otherwise the beeps output are WAY louder than they were on pure
BIOS setup.
Unless someone (from Realtek probably) knows how to make the beep generator
node output appear in speakers / headphones using PC beep passthrough seems
to be the only way to make PC speaker beeping actually work on this
platform.
Currently, __reserve_bp_slot() returns -ENOSPC for unsupported
breakpoint types on the architecture. For example, powerpc
does not support hardware instruction breakpoints. This causes
the perf_skip BPF selftest to fail, as neither ENOENT nor
EOPNOTSUPP is returned by perf_event_open for unsupported
breakpoint types. As a result, the test that should be skipped
for this arch is not correctly identified.
To resolve this, hw_breakpoint_event_init() should exit early by
checking for unsupported breakpoint types using
hw_breakpoint_slots_cached() and return the appropriate error
(-EOPNOTSUPP).
When the vblank v4l2 control is set, it does not get written to the
hardware unless exposure is also changed. Change the behavior such that
the vblank is written immediately when the control is set, as setting
the vblank without changing the exposure is a valid use case (such as
for changing the frame rate).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
Allocating a domain with a fault ID indicates that the domain is faultable.
However, there is a gap for the nested parent domain to support PRI. Some
hardware lacks the capability to distinguish whether PRI occurs at stage 1
or stage 2. This limitation may require software-based page table walking
to resolve. Since no in-tree IOMMU driver currently supports this
functionality, it is disallowed. For more details, refer to the related
discussion at [1].
Link: https://patch.msgid.link/r/20250226104012.82079-1-yi.l.liu@intel.com Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 403ebc877832 ("ublk_drv: add module parameter of ublks_max for
limiting max allowed ublk dev"), claimed ublks_max was added to prevent
a DoS situation with an untrusted user creating too many ublk devices.
If that's the case, ublks_max should only restrict the number of
unprivileged ublk devices in the system. Enforce the limit only for
unprivileged ublk devices, and rename variables accordingly. Leave the
external-facing parameter name unchanged, since changing it may break
systems which use it (but still update its documentation to reflect its
new meaning).
As a result of this change, in a system where there are only normal
(non-unprivileged) devices, the maximum number of such devices is
increased to 1 << MINORBITS, or 1048576. That ought to be enough for
anyone, right?
Add .match_phy_device for the existing TJAs to differentiate between
TJA1103 and TJA1104.
TJA1103 and TJA1104 share the same PHY_ID but TJA1104 has MACsec
capabilities while TJA1103 doesn't.
The get_state_synchronize_rcu_full() and poll_state_synchronize_rcu_full()
functions use the root rcu_node structure's ->gp_seq field to detect
the beginnings and ends of grace periods, respectively. This choice is
necessary for the poll_state_synchronize_rcu_full() function because
(give or take counter wrap), the following sequence is guaranteed not
to trigger:
The RCU callbacks that awaken synchronize_rcu() instances are
guaranteed not to be invoked before the root rcu_node structure's
->gp_seq field is updated to indicate the end of the grace period.
However, these callbacks might start being invoked immediately
thereafter, in particular, before rcu_state.gp_seq has been updated.
Therefore, poll_state_synchronize_rcu_full() must refer to the
root rcu_node structure's ->gp_seq field. Because this field is
updated under this structure's ->lock, any code following a call to
poll_state_synchronize_rcu_full() will be fully ordered after the
full grace-period computation, as is required by RCU's memory-ordering
semantics.
By symmetry, the get_state_synchronize_rcu_full() function should also
use this same root rcu_node structure's ->gp_seq field. But it turns out
that symmetry is profoundly (though extremely infrequently) destructive
in this case. To see this, consider the following sequence of events:
1. CPU 0 starts a new grace period, and updates rcu_state.gp_seq
accordingly.
2. As its first step of grace-period initialization, CPU 0 examines
the current CPU hotplug state and decides that it need not wait
for CPU 1, which is currently offline.
3. CPU 1 comes online, and updates its state. But this does not
affect the current grace period, but rather the one after that.
After all, CPU 1 was offline when the current grace period
started, so all pre-existing RCU readers on CPU 1 must have
completed or been preempted before it last went offline.
The current grace period therefore has nothing it needs to wait
for on CPU 1.
4. CPU 1 switches to an rcutorture kthread which is running
rcutorture's rcu_torture_reader() function, which starts a new
RCU reader.
5. CPU 2 is running rcutorture's rcu_torture_writer() function
and collects a new polled grace-period "cookie" using
get_state_synchronize_rcu_full(). Because the newly started
grace period has not completed initialization, the root rcu_node
structure's ->gp_seq field has not yet been updated to indicate
that this new grace period has already started.
This cookie is therefore set up for the end of the current grace
period (rather than the end of the following grace period).
6. CPU 0 finishes grace-period initialization.
7. If CPU 1’s rcutorture reader is preempted, it will be added to
the ->blkd_tasks list, but because CPU 1’s ->qsmask bit is not
set in CPU 1's leaf rcu_node structure, the ->gp_tasks pointer
will not be updated. Thus, this grace period will not wait on
it. Which is only fair, given that the CPU did not come online
until after the grace period officially started.
8. CPUs 0 and 2 then detect the new grace period and then report
a quiescent state to the RCU core.
9. Because CPU 1 was offline at the start of the current grace
period, CPUs 0 and 2 are the only CPUs that this grace period
needs to wait on. So the grace period ends and post-grace-period
cleanup starts. In particular, the root rcu_node structure's
->gp_seq field is updated to indicate that this grace period
has now ended.
10. CPU 2 continues running rcu_torture_writer() and sees that,
from the viewpoint of the root rcu_node structure consulted by
the poll_state_synchronize_rcu_full() function, the grace period
has ended. It therefore updates state accordingly.
11. CPU 1 is still running the same RCU reader, which notices this
update and thus complains about the too-short grace period.
The fix is for the get_state_synchronize_rcu_full() function to use
rcu_state.gp_seq instead of the root rcu_node structure's ->gp_seq field.
With this change in place, if step 5's cookie indicates that the grace
period has not yet started, then any prior code executed by CPU 2 must
have happened before CPU 1 came online. This will in turn prevent CPU
1's code in steps 3 and 11 from spanning CPU 2's grace-period wait,
thus preventing CPU 1 from being subjected to a too-short grace period.
This commit therefore makes this change. Note that there is no change to
the poll_state_synchronize_rcu_full() function, which as noted above,
must continue to use the root rcu_node structure's ->gp_seq field.
This is of course an asymmetry between these two functions, but is an
asymmetry that is absolutely required for correct operation. It is a
common human tendency to greatly value symmetry, and sometimes symmetry
is a wonderful thing. Other times, symmetry results in poor performance.
But in this case, symmetry is just plain wrong.
Nevertheless, the asymmetry does require an additional adjustment.
It is possible for get_state_synchronize_rcu_full() to see a given
grace period as having started, but for an immediately following
poll_state_synchronize_rcu_full() to see it as having not yet started.
Given the current rcu_seq_done_exact() implementation, this will
result in a false-positive indication that the grace period is done
from poll_state_synchronize_rcu_full(). This is dealt with by making
rcu_seq_done_exact() reach back three grace periods rather than just
two of them.
However, simply changing get_state_synchronize_rcu_full() function to
use rcu_state.gp_seq instead of the root rcu_node structure's ->gp_seq
field results in a theoretical bug in kernels booted with
rcutree.rcu_normal_wake_from_gp=1 due to the following sequence of
events:
o The rcu_gp_init() function invokes rcu_seq_start() to officially
start a new grace period.
o A new RCU reader begins, referencing X from some RCU-protected
list. The new grace period is not obligated to wait for this
reader.
o An updater removes X, then calls synchronize_rcu(), which queues
a wait element.
o The grace period ends, awakening the updater, which frees X
while the reader is still referencing it.
The reason that this is theoretical is that although the grace period
has officially started, none of the CPUs are officially aware of this,
and thus will have to assume that the RCU reader pre-dated the start of
the grace period. Detailed explanation can be found at [2] and [3].
Except for kernels built with CONFIG_PROVE_RCU=y, which use the polled
grace-period APIs, which can and do complain bitterly when this sequence
of events occurs. Not only that, there might be some future RCU
grace-period mechanism that pulls this sequence of events from theory
into practice. This commit therefore also pulls the call to
rcu_sr_normal_gp_init() to precede that to rcu_seq_start().
Although this fixes commit 91a967fd6934 ("rcu: Add full-sized polling
for get_completed*() and poll_state*()"), it is not clear that it is
worth backporting this commit. First, it took me many weeks to convince
rcutorture to reproduce this more frequently than once per year.
Second, this cannot be reproduced at all without frequent CPU-hotplug
operations, as in waiting all of 50 milliseconds from the end of the
previous operation until starting the next one. Third, the TREE03.boot
settings cause multi-millisecond delays during RCU grace-period
initialization, which greatly increase the probability of the above
sequence of events. (Don't do this in production workloads!) Fourth,
the TREE03 rcutorture scenario was modified to use four-CPU guest OSes,
to have a single-rcu_node combining tree, no testing of RCU priority
boosting, and no random preemption, and these modifications were
necessary to reproduce this issue in a reasonable timeframe. Fifth,
extremely heavy use of get_state_synchronize_rcu_full() and/or
poll_state_synchronize_rcu_full() is required to reproduce this, and as
of v6.12, only kfree_rcu() uses it, and even then not particularly
heavily.
[boqun: Apply the fix [1], and add the comment before the moved
rcu_sr_normal_gp_init(). Additional links are added for explanation.]
[why]
When SubVP is active the HW cursor size is limited to 64x64, and
anything larger will force composition which is bad for gaming on
DCN3.2 if the game uses a larger cursor.
[how]
If HW cursor is requested, typically by a fullscreen game, do not
enable SubVP so that up to 256x256 cursor sizes are available for
DCN3.2.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Aric Cyr <Aric.Cyr@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY&HOW]
P-state type would remain on previously used when unsupported which
causes confusion in logging and visual confirm, so set back to zero
when unsupported.
Reviewed-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
It should no longer use DMCUB_SOFT_RESET as it can result
in the memory request path becoming desynchronized.
[HOW]
To ensure robustness in the reset sequence:
1) Extend timeout on the "halt" command sent via gpint, and check for
controller to enter "wait" as a stronger guarantee that there are no
requests to memory still in flight.
2) Remove usage of DMCUB_SOFT_RESET
3) Rely on PSP to reset the controller safely
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why/How]
Certain PCON will clear the FRL_MODE bit despite supporting the link BW
indicated in the other bits.
Thus, skip checking the FRL_MODE bit when interpreting the
hdmi_encoded_link_bw struct.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
If we soft reset before halt finishes and there are outstanding
memory transactions then the memory interface may produce unexpected
results, such as out of order transactions when the firmware next runs.
These can manifest as random or unexpected load/store violations.
[How]
Increase the timeout before soft reset to ensure the DMCUB has quiesced.
This is effectively 1s maximum based on experimentation.
Use the enable bit check on DCN31 like we're doing on DCN35 and reorder
the reset writes to follow the HW programming guide.
Ensure we're reading SCRATCH7 instead of SCRATCH8 for the HALT code.
No current versions of DMCUB firmware use the SCRATCH8 boot bit to
dynamically switch where the HALT code goes to maintain backwards
compatibility with PSP.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After a full device reset, shared memory region will clear out and it's
not possible to reliably save the region in case of RAS errors.
Reinitialize the flags if required.
SRIOV VF does not have write access to AGP BAR regs.
Skip the writes to avoid a dmesg warning.
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The name of an IP is a function of its version. As such, given an IP
version, it should be clear to identify the name of that IP release.
With the current code, we keep that mapping clear for pre-GMDID IPs, but
ambiguous for GMDID-based ones. That causes two types of inconveniences:
1. The end user, who might not have all the necessary mapping at hand,
might be confused when seeing different possible IP names in the
dmesg log.
2. It makes a developer who is not familiar with the "IP version" to
"Release name" need to resort to looking at the specs to understand
see what version maps to what. While the specs should be the
authority on the mapping, we should make our lives easier by
reflecting that mapping in the source code.
Thus, since the IP name is tied to the version, let's remove the
ambiguity by using a "name" field in struct gmdid_map instead of
accumulating names in the descriptor instances.
This does result in the code having IP name being defined in
different structs (gmdid_map, xe_graphics_desc, xe_media_desc), but that
will be resolved in upcoming changes.
A side-effect of this change is that media_xe2 exactly matches
media_xelpmp now, so we just re-use the latter.
v2:
- Drop media_xe2 and re-use media_xelpmp. (Matt)
Both MSM8974 and MSM8226 have only CX as power domain with MX & PX being
handled as regulators. Handle this case by reodering pd_names to have CX
first, and handling that the driver core will already attach a single
power domain internally.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
[luca: minor changes] Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250206-wcnss-singlepd-v2-2-9a53ee953dee@lucaweiss.eu
[bjorn: Added missing braces to else after multi-statement if] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 29390bb5661d ("blk-throttle: support prioritized processing of metadata")
takes bytes/ios carryover for prioritized processing of metadata. Turns out
we can support it by charging it directly without trimming slice, and the
result is same with carryover.
Cc: Tejun Heo <tj@kernel.org> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20250305043123.3938491-3-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().
However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.
Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.
When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC interface is taken down
administratively and brought back up, it is blocked by
phylink_expects_phy().
Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().
Add drm_gem_is_imported() that tests if a GEM object's buffer has
been imported. Update the GEM code accordingly.
GEM code usually tests for imports if import_attach has been set
in struct drm_gem_object. But attaching a dma-buf on import requires
a DMA-capable importer device, which is not the case for many serial
busses like USB or I2C. The new helper tests if a GEM object's dma-buf
has been created from the GEM object.
MT8188 uses DPI1 to output to the HDMI controller: add the
Start of Frame and End of Frame configuration for the DPI1
IP to the tables to unblock generation and sending of these
signals to the GCE.
A cache device failing to resume due to mapping errors should not be
retried, as the failure leaves a partially initialized policy object.
Repeating the resume operation risks triggering BUG_ON when reloading
cache mappings into the incomplete policy object.
Reproduce steps:
1. create a cache metadata consisting of 512 or more cache blocks,
with some mappings stored in the first array block of the mapping
array. Here we use cache_restore v1.0 to build the metadata.
The current xHCI driver does not validate whether a page size of 4096
bytes is supported. Address the issue by setting the page size to the
value supported by the xHCI controller, as read from the Page Size
register. In the event of an unexpected value; default to a 4K page size.
Additionally, this commit removes unnecessary debug messages and instead
prints the supported and used page size once.
The xHCI controller supports page sizes of (2^{(n+12)}) bytes, where 'n'
is the Page Size Bit. Only one page size is supported, with a maximum
page size of 128 KB.
[Why]
There are several ns_to_ktime() calls that require using nanoseconds. It is
better to replace them with us_to_ktime() to make code clear, getting rid
of multiplication by 1000.
Also the timer function code may have an integer wrap-around issue. Since
both tx_custom_low_usecs and tx_custom_high_usecs can be set to up to 9999999 from the user space via cec_pin_error_inj_parse_line(), this may
cause usecs to be overflowed when adap->monitor_pin_cnt is zero and usecs
is multiplied by 1000.
[How]
Take advantage of using an appropriate helper func us_to_ktime() instead of
ns_to_ktime() to improve readability and to make the code clearer. And this
also mitigates possible integer wrap-arounds when usecs value is too large
and it is multiplied by 1000.
Found by Linux Verification Center (linuxtesting.org) with Svace.
An of_node_put(i2c_bus) call was immediately used after a pointer check
for an of_find_i2c_adapter_by_node() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
This does not necessarily get included through asm/io.h:
drivers/soc/samsung/exynos3250-pmu.c:120:18: error: use of undeclared identifier 'ARRAY_SIZE'
120 | for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
| ^
drivers/soc/samsung/exynos5250-pmu.c:162:18: error: use of undeclared identifier 'ARRAY_SIZE'
162 | for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
| ^
TTM doesn't support fair eviction via WW locking, this mitigated in by
using retry loops in exec and preempt rebind worker. Extend this retry
loop to BO allocation. Once TTM supports fair eviction this patch can be
reverted.
Clear root PT entry and invalidate entire VM's address space when
closing the VM. Will prevent the GPU from accessing any of the VM's
memory after closing.
v2:
- s/vma/vm in kernel doc (CI)
- Don't nuke migration VM as this occur at driver unload (CI)
v3:
- Rebase and pull into SVM series (Thomas)
- Wait for pending binds (Thomas)
v5:
- Remove xe_gt_tlb_invalidation_fence_fini in error case (Matt Auld)
- Drop local migration bool (Thomas)
v7:
- Add drm_dev_enter/exit protecting invalidation (CI, Matt Auld)
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation.
snd_seq_poll() calls snd_seq_write_pool_allocated() that reads out a
field in client->pool object, while it can be updated concurrently via
ioctls, as reported by syzbot. The data race itself is harmless, as
it's merely a poll() call, and the state is volatile. OTOH, the read
out of poll object info from the caller side is fragile, and we can
leave it better in snd_seq_pool_poll_wait() alone.
A similar pattern is seen in snd_seq_kernel_client_write_poll(), too,
which is called from the OSS sequencer.
This patch drops the pool checks from the caller side and add the
pool->lock in snd_seq_pool_poll_wait() for better data consistency.
Some discrete graphics cards such as the NVIDIA RTX A6000 support
resizable BARs. When connecting an A6000 card to the NVIDIA IGX Orin
platform, resizing the BAR1 aperture to 8GB fails because the current
device-tree configuration for the PCIe C5 slot cannot support this.
Fix this by updating the device-tree 'reg' and 'ranges' properties for
the PCIe C5 slot to support this.
According to the board schematics the enable pin of this regulator is
connected to gpio line #9 of the first instance of the TCA9539
GPIO expander, so adjust it.
While the entry get in svm_range_unmap_from_cpu is the last entry, and
the entry is page fault, it also need to be dropped. So for equal case,
it also need to be dropped.
v2:
Only modify the svm_range_restore_pages.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Xiaogang Chen<xiaogang.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For default policy, driver will issue an RMA event when the number of
bad pages is greater than 8 physical rows, rather than reaches 8
physical rows, don't rely on threshold configurable parameters in
default mode.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set per-process static sh_mem config only once during process
initialization. Move all static changes from update_qpd() which is
called each time a queue is created to set_cache_memory_policy() which
is called once during process initialization.
set_cache_memory_policy() is currently defined only for cik and vi
family. So this commit only focuses on these two. A separate commit will
address other asics.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Define set_cache_memory_policy() for these asics and move all static
changes from update_qpd() which is called each time a queue is created
to set_cache_memory_policy() which is called once during process
initialization
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Amber Lin <Amber.Lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While MXS_DCP_CONTROL0_OTP_KEY is set, the CRYPTO_KEY (DCP_PAES_KEY_OTP)
is used even if the UNIQUE_KEY (DCP_PAES_KEY_UNIQUE) is selected. This
is not clearly documented, but this implementation is consistent with
NXP's downstream kernel fork and optee_os.
Signed-off-by: Sven Schwermer <sven@svenschwermer.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Unlike the decompression code, the compression code in LZO never
checked for output overruns. It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.
Add a safe compression interface that checks for the end of buffer
before each write. Use the safe interface in crypto/lzo.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently BARs that have been disabled by the endpoint controller driver
will result in a test FAIL.
Returning FAIL for a BAR that is disabled seems overly pessimistic.
There are EPC that disables one or more BARs intentionally.
One reason for this is that there are certain EPCs that are hardwired to
expose internal PCIe controller registers over a certain BAR, so the EPC
driver disables such a BAR, such that the host will not overwrite random
registers during testing.
Such a BAR will be disabled by the EPC driver's init function, and the
BAR will be marked as BAR_RESERVED, such that it will be unavailable to
endpoint function drivers.
Let's return FAIL only for BARs that are actually enabled and failed the
test, and let's return skip for BARs that are not even enabled.
The current code returns -ENOMEM if test->bar[barno] is NULL.
There can be two reasons why test->bar[barno] is NULL:
1) The pci_ioremap_bar() call in pci_endpoint_test_probe() failed.
2) The BAR was skipped, because it is disabled by the endpoint.
Many PCI endpoint controller drivers will disable all BARs in their
init function. A disabled BAR will have a size of 0.
A PCI endpoint function driver will be able to enable any BAR that
is not marked as BAR_RESERVED (which means that the BAR should not
be touched by the EPF driver).
Thus, perform check if the size is 0, before checking if
test->bar[barno] is NULL, such that we can return different errors.
This will allow the selftests to return SKIP instead of FAIL for
disabled BARs.
Fix a kernel oops found while testing the stm32_pcie Endpoint driver
with handling of PERST# deassertion:
During EP initialization, pci_epf_test_alloc_space() allocates all BARs,
which are further freed if epc_set_bar() fails (for instance, due to no
free inbound window).
However, when pci_epc_set_bar() fails, the error path:
pci_epc_set_bar() ->
pci_epf_free_space()
does not clear the previous assignment to epf_test->reg[bar].
Then, if the host reboots, the PERST# deassertion restarts the BAR
allocation sequence with the same allocation failure (no free inbound
window), creating a double free situation since epf_test->reg[bar] was
deallocated and is still non-NULL.
Thus, make sure that pci_epf_alloc_space() and pci_epf_free_space()
invocations are symmetric, and as such, set epf_test->reg[bar] to NULL
when memory is freed.
The boot status in the watchdog device struct is updated during
controller probe stage. Application layer can get the boot status
through the command, cat /sys/class/watchdog/watchdogX/bootstatus.
The bootstatus can be,
WDIOF_CARDRESET => System is reset due to WDT timeout occurs.
Others => Other reset events, e.g., power on reset.
On ASPEED platforms, boot status is recorded in the SCU registers.
- AST2400: Only a bit is used to represent system reset triggered by
any WDT controller.
- AST2500/AST2600: System reset triggered by different WDT controllers
can be distinguished by different SCU bits.
Besides, on AST2400 and AST2500, since alternating boot event is
also triggered by using WDT timeout mechanism, it is classified
as WDIOF_CARDRESET.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250113093737.845097-2-chin-ting_kuo@aspeedtech.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the PMU register bits for the ExynosAutoV920 SoC.
This SoC has different bit information compared to its previous
version, ExynosAutoV9, and we have made the necessary adjustments.
Limit the number of slots in pipe_resize_ring() to the maximum value
representable by pipe->{head,tail}. Values beyond the max limit can
lead to incorrect pipe occupancy related calculations where the pipe
will never appear full.
In coresight-etb10 drivers, etb_drvdata->spinlock can be held
during __schedule() by perf_event_task_sched_out()/in().
Since etb_drvdata->spinlock type is spinlock_t and
perf_event_task_sched_out()/in() is called after acquiring rq_lock,
which is raw_spinlock_t (an unsleepable lock),
this poses an issue in PREEMPT_RT kernel where spinlock_t is sleepable.
To address this, change type etb_drvdata->spinlock in coresight-etb10 drivers,
which can be called by perf_event_task_sched_out()/in(),
from spinlock_t to raw_spinlock_t.
Reviewed-by: James Clark <james.clark@linaro.org> Reviewed-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250306121110.1647948-6-yeoreum.yun@arm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
There're few sysfs attributes(RW) whose store method is protected
with q->limits_lock, however the corresponding show method of these
attributes run holding q->sysfs_lock and that doesn't make sense
as ideally the show method of these attributes should also run
holding q->limits_lock instead of q->sysfs_lock. Hence update the
show method of these sysfs attributes so that reading of these
attributes acquire q->limits_lock instead of q->sysfs_lock.
Similarly, there're few sysfs attributes(RO) whose show method is
currently protected with q->sysfs_lock however updates to these
attributes could occur using atomic limit update APIs such as queue_
limits_start_update() and queue_limits_commit_update() which run
holding q->limits_lock. So that means that reading these attributes
holding q->sysfs_lock doesn't make sense. Hence update the show method
of these sysfs attributes(RO) such that they run with holding q->
limits_lock instead of q->sysfs_lock.
We have defined a new macro QUEUE_LIM_RO_ENTRY() which uses new ->show_
limit() method and it runs holding q->limits_lock. All existing sysfs
attributes(RO) which needs protection using q->limits_lock while
reading have been now updated to use this new macro for initialization.
Also, the existing QUEUE_LIM_RW_ENTRY() is updated to use new ->show_
limit() method for reading attributes instead of existing ->show()
method. As ->show_limit() runs holding q->limits_lock, the existing
sysfs attributes(RW) requiring protection are now inherently protected
using q->limits_lock instead of q->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Nilay Shroff <nilay@linux.ibm.com> Link: https://lore.kernel.org/r/20250304102551.2533767-2-nilay@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 2545c1c948a6 ("auxdisplay: Move hwidth and bwidth to struct
hd44780_common") makes charlcd_alloc() argument-less effectively dropping
the single allocation for the struct charlcd_priv object along with
the driver specific one. Restore that behaviour here.
[Why]
When switching between PSR/Replay,
the DPCD config of previous mode is not cleared,
resulting in unexpected behavior in TCON.
[How]
Initialize the DPCD in setup function
Reviewed-by: Robin Chen <robin.chen@amd.com> Signed-off-by: Leon Huang <Leon.Huang1@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
In some cases the remain de-tile buffer segments will be greater
than zero if we don't add the non-top pipe to calculate, at
this time the override de-tile buffer size will be valid and used.
But it makes the de-tile buffer segments used finally for all of pipes
exceed the maximum.
[HOW]
Add the non-top pipe to calculate the remain de-tile buffer segments.
Don't set override size to use the average according to pipe count
if the value exceed the maximum.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Some regulatory bodies doesn't allow IR (initiate radioation) on a
specific subband, but allows it for channels with a bandwidth of 20 MHz.
Add a channel flag that indicates that, and consider it in
cfg80211_reg_check_beaconing.
While on it, fix the kernel doc of enum nl80211_reg_rule_flags and
change it to use BIT().
If U-APSD isn't enabled by us, then IEEE80211_STA_UAPSD_ENABLED
won't be set, but the AP can still support it in that case. Only
require U-APSD from the AP if we enabled it, don't require it to
be disabled on the AP if we didn't.
Do address translations only between shared links. It is
possible that while an non-AP MLD station and an AP MLD
station have shared links, the frame is intended to be sent
on a link which is not shared (for example when sending a
probe response).
If multi-link reconfiguration fails, we can disconnect with a local link
already allocated but the BSS entry not assigned yet, which leads to a
warning in cfg80211. Add a check to avoid the warning.
In the multi-link reconfiguration frame, the per-STA profile for
added links shouldn't include the multi-link element. Set the
association ID to an invalid value, so it doesn't erroneously
match the link ID if that happens to be zero.
The order of actions taken for debug was implemented incorrectly.
Now we implemented the dump split and do the FW reset only in the
middle of the dump (rather than the FW killing itself on error.)
As a result, some of the actions taken when applying the config
will now crash the device, so we need to fix the order.
The FW is now responsible of determining the SMPS mode.
If the user disabled power save in a certain vif, we send the vif-level
power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit
for that vif.
But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in
the device-level command to determine the SMPS mode.
To W/A this, send also the device-level command when the power save of a
vif changes, and disable power save if there is any vif that has power
save disabled.
iwl_trans_reclaim is warning if it is called when the FW is not alive.
But if it is called when there is a pending restart, i.e. after a FW
error, there is no need to warn, instead - return silently.
The commit 9e70a5e109a4 ("printk: Add per-console suspended state")
introduced the CON_SUSPENDED flag for consoles. The suspended consoles
will stop receiving messages, so don't unblank suspended consoles
because it won't be showing anything either way.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-5-0b878577f2e6@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At the moment, if of_iommu_configure() allocates dev->iommu itself via
iommu_fwspec_init(), then suffers a DT parsing failure, it cleans up the
fwspec but leaves the empty dev_iommu hanging around. So far this is
benign (if a tiny bit wasteful), but we'd like to be able to reason
about dev->iommu having a consistent and unambiguous lifecycle. Thus
make sure that the of_iommu cleanup undoes precisely whatever it did.
projects / thirdparty / kernel / stable.git / log
