Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE.
Link: https://lore.kernel.org/linux-bluetooth/5782243.rdbgypaU67@n9w6sw14/ Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Christian Eggers <ceggers@arri.de>
Bluetooth: L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked
against the suggested MTU of the listening socket as that is required
by the likes of PTS L2CAP/ECFC/BV-27-C test which expects
L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu.
In order to be able to set chan->omtu the code now allows setting
setsockopt(BT_SNDMTU), but it is only allowed when connection has not
been stablished since there is no procedure to reconfigure the output
MTU.
Link: https://github.com/bluez/bluez/issues/1895 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Mariusz Skamra [Thu, 12 Feb 2026 13:46:46 +0000 (14:46 +0100)]
Bluetooth: Fix CIS host feature condition
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154ca ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings") Cc: stable@vger.kernel.org Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
Similar to 03dba9cea72f ("Bluetooth: L2CAP: Fix not responding with
L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall
be used when BT_SECURITY_MEDIUM is set since that means security mode 2
which mean it doesn't require authentication which results in
qualification test L2CAP/ECFC/BV-32-C failing.
Link: https://github.com/bluez/bluez/issues/1871 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Jinwang Li [Thu, 5 Feb 2026 06:26:00 +0000 (14:26 +0800)]
Bluetooth: hci_qca: Cleanup on all setup failures
The setup process previously combined error handling and retry gating
under one condition. As a result, the final failed attempt exited
without performing cleanup.
Update the failure path to always perform power and port cleanup on
setup failure, and reopen the port only when retrying.
Fixes: 9e80587aba4c ("Bluetooth: hci_qca: Enhance retry logic in qca_setup") Signed-off-by: Jinwang Li <jinwang.li@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: purge error queues in socket destructors
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df7b ("Bluetooth: add support for skb TX SND/COMPLETION timestamping") Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a Cc: stable@vger.kernel.org Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865 Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ralf Lici [Wed, 18 Feb 2026 20:08:26 +0000 (21:08 +0100)]
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%.
Fixes: 11851cbd60ea ("ovpn: implement TCP transport") Signed-off-by: Ralf Lici <ralf@mandelbit.com> Signed-off-by: Antonio Quartulli <antonio@openvpn.net> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
bnxt_en: Fix RSS context and ntuple filter issues
The first patch fixes the problem of ifup failing if one or more RSS
contexts were previously created. The 2nd patch fixes ntuple filter
deletion errors in ifdown state. The last patch adds self tests to
cover these failure cases.
====================
Pavan Chebbi [Thu, 19 Feb 2026 18:53:13 +0000 (10:53 -0800)]
selftests: drv-net: rss_ctx: test RSS contexts persist after ifdown/up
Add a test to verify that RSS contexts persist across interface
down/up along with their associated Ntuple filters. Another test
that creates contexts/rules keeping interface down and test their
persistence is also added.
Tested on bnxt_en:
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: rss_ctx.py
# TAP version 13
# 1..2
# ok 1 rss_ctx.test_rss_context_persist_create_and_ifdown
# ok 2 rss_ctx.test_rss_context_persist_ifdown_and_create # SKIP Create context not supported with interface down
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260219185313.2682148-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Thu, 19 Feb 2026 18:53:12 +0000 (10:53 -0800)]
bnxt_en: Fix deleting of Ntuple filters
Ntuple filters can be deleted when the interface
is down. The current code blindly sends the filter
delete command to FW. When the interface is down, all
the VNICs are deleted in the FW. When the VNIC is
freed in the FW, all the associated filters are also
freed. We need not send the free command explicitly.
Sending such command will generate FW error in the
dmesg.
In order to fix this, we can safely return from
bnxt_hwrm_cfa_ntuple_filter_free() when BNXT_STATE_OPEN
is not true which confirms the VNICs have been deleted.
Fixes: 8336a974f37d ("bnxt_en: Save user configured filters in a lookup list") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260219185313.2682148-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavan Chebbi [Thu, 19 Feb 2026 18:53:11 +0000 (10:53 -0800)]
bnxt_en: Fix RSS context delete logic
We need to free the corresponding RSS context VNIC
in FW everytime an RSS context is deleted in driver.
Commit 667ac333dbb7 added a check to delete the VNIC
in FW only when netif_running() is true to help delete
RSS contexts with interface down.
Having that condition will make the driver leak VNICs
in FW whenever close() happens with active RSS contexts.
On the subsequent open(), as part of RSS context restoration,
we will end up trying to create extra VNICs for which we
did not make any reservation. FW can fail this request,
thereby making us lose active RSS contexts.
Suppose an RSS context is deleted already and we try to
process a delete request again, then the HWRM functions
will check for validity of the request and they simply
return if the resource is already freed. So, even for
delete-when-down cases, netif_running() check is not
necessary.
Remove the netif_running() condition check when deleting
an RSS context.
Reported-by: Jakub Kicinski <kicinski@meta.com> Fixes: 667ac333dbb7 ("eth: bnxt: allow deleting RSS contexts when the device is down") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20260219185313.2682148-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Walleij [Thu, 19 Feb 2026 11:38:50 +0000 (12:38 +0100)]
net: ethernet: xscale: Check for PTP support properly
In ixp4xx_get_ts_info() ixp46x_ptp_find() is called
unconditionally despite this feature only existing on
ixp46x, leading to the following splat from tcpdump:
root@OpenWrt:~# tcpdump -vv -X -i eth0
(...)
Unable to handle kernel NULL pointer dereference at virtual address 00000238 when read
(...)
Call trace:
ptp_clock_index from ixp46x_ptp_find+0x1c/0x38
ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64
ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108
__ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648
__dev_ethtool from dev_ethtool+0x160/0x234
dev_ethtool from dev_ioctl+0x2cc/0x460
dev_ioctl from sock_ioctl+0x1ec/0x524
sock_ioctl from sys_ioctl+0x51c/0xa94
sys_ioctl from ret_fast_syscall+0x0/0x44
(...)
Segmentation fault
Check for ixp46x in ixp46x_ptp_find() before trying to set up
PTP to avoid this.
To avoid altering the returned error code from ixp4xx_hwtstamp_set()
which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP
from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter
the error code. The helper function ixp46x_ptp_find() helper
returns -ENODEV.
Dmitry Torokhov [Thu, 19 Feb 2026 00:56:00 +0000 (16:56 -0800)]
net: phy: qcom: qca807x: normalize return value of gpio_get
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by qca807x_gpio_get() is
normalized to the [0, 1] range.
Fixes: 86ef402d805d ("gpiolib: sanitize the return value of gpio_chip::get()") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/aZZeyr2ysqqk2GqA@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Check the value of ipv6_dev_get_saddr() to fix an
uninitialized saddr in xfrm6_get_saddr().
From Jiayuan Chen.
2) Skip the templates check for packet offload in tunnel
mode. Is was already done by the hardware and causes
an unexpected XfrmInTmplMismatch increase.
From Leon Romanovsky.
3) Fix a unregister_netdevice stall due to not dropped
refcounts by always flushing xfrm state and policy
on a NETDEV_UNREGISTER event.
From Tetsuo Handa.
* tag 'ipsec-2026-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
xfrm: skip templates check for packet offload tunnel mode
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
====================
Satish Kharat [Thu, 19 Feb 2026 19:24:00 +0000 (11:24 -0800)]
MAINTAINERS: update enic and usnic maintainers
Remove Christian Benvenuti from the enic/usnic maintainer lists because he
is no longer working on the drivers and the email address is no longer valid.
Keep Satish Kharat as the enic maintainer and the usnic co-maintainer.
When a port offloads a bridge, the switch must be reset to change
the VLAN awareness state (the SJA1105_VLAN_FILTERING reason for
sja1105_static_config_reload()). When the port leaves a VLAN-aware
bridge, it must also be reset for the same reason: it is returning
to operation as a VLAN-unaware standalone port.
sja1105_static_config_reload() triggers the phylink link replay helpers.
Because sja1105 is a switch, it has multiple user ports. During unbind,
ports are torn down one by one in dsa_switch_teardown_ports() ->
dsa_port_teardown() -> dsa_user_destroy().
The crash happens when the first user port is not part of the VLAN-aware
bridge, but any other user port is.
Tearing down the first user port causes phylink_destroy() to be called
on dp->pl, and this pointer to be set to NULL. Then, when the second
user port is torn down, this was offloading a VLAN-aware bridge port, so
indirectly it will trigger sja1105_static_config_reload().
The latter function iterates using dsa_switch_for_each_available_port(),
and unconditionally dereferences dp->pl, including for the
aforementioned torn down previous port, and passes that to phylink.
This is where the NULL pointer is coming from.
There are multiple levels at which this could be avoided:
- add an "if (dp->pl)" in sja1105_static_config_reload()
- make the phylink replay helpers NULL-tolerant
- mark ports as DSA_PORT_TYPE_UNUSED after dsa_port_phylink_destroy()
has run, such that subsequent dsa_switch_for_each_available_port()
iterations skip them
- disconnect the entire switch at once from switchdev and
NETDEV_CHANGEUPPER events while unbinding, not just port by port,
likely using a "ds->unbinding = true" mechanism or similar
however options 3 and 4 are quite heavy and might have side effects.
Although 2 allows to keep the driver simpler, the phylink API it not
NULL-tolerant in general and is not responsible for the NULL pointer
(this is something done by dsa_port_phylink_destroy()). So I went
with 1.
Functionally speaking, skipping the replay helpers for ports without
a phylink instance is fine, because that only happens during driver
removal (an operation which cannot be cancelled). The ports are not
required to work (although they probably still will - untested
assumption - as long as we don't overwrite the last port speed with
SJA1105_SPEED_AUTO).
Fixes: 0b2edc531e0b ("net: dsa: sja1105: let phylink help with the replay of link callbacks") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20260218160551.194782-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Pålsson [Wed, 18 Feb 2026 05:28:22 +0000 (05:28 +0000)]
net: usb: lan78xx: scan all MDIO addresses on LAN7801
The LAN7801 is designed exclusively for external PHYs (unlike the
LAN7800/LAN7850 which have internal PHYs), but lan78xx_mdio_init()
restricts PHY scanning to MDIO addresses 0-7 by setting phy_mask to
~(0xFF). This prevents discovery of external PHYs wired to addresses
outside that range.
One such case is the DP83TC814 100BASE-T1 PHY, which is typically
configured at MDIO address 10 via PHYAD bootstrap pins and goes
undetected with the current mask.
Remove the restrictive phy_mask assignment for the LAN7801 so that the
default mask of 0 applies, allowing all 32 MDIO addresses to be
scanned during bus registration.
Ziyi Guo [Tue, 17 Feb 2026 17:50:12 +0000 (17:50 +0000)]
net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time.
Hyunwoo Kim [Tue, 17 Feb 2026 17:16:43 +0000 (02:16 +0900)]
espintcp: Fix race condition in espintcp_close()
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
Eric Dumazet [Wed, 18 Feb 2026 14:13:37 +0000 (14:13 +0000)]
psp: use sk->sk_hash in psp_write_headers()
udp_flow_src_port() is indirectly using sk->sk_txhash as a base,
because __tcp_transmit_skb() uses skb_set_hash_from_sk().
This is problematic because this field can change over the
lifetime of a TCP flow, thanks to calls to sk_rethink_txhash().
Problem is that some NIC might (ab)use the PSP UDP source port in their
RSS computation, and PSP packets for a given flow could jump
from one queue to another.
In order to avoid surprises, it is safer to let Protective Load
Balancing (PLB) get its entropy from the IPv6 flowlabel,
and change psp_write_headers() to use sk->sk_hash which
does not change for the duration of the flow.
We might add a sysctl to select the behavior, if there
is a need for it.
Fixes: fc724515741a ("psp: provide encapsulation helper for drivers") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-By: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20260218141337.999945-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 19 Feb 2026 18:39:08 +0000 (10:39 -0800)]
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
net: nfc: nci: Fix parameter validation for packet data
Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct).
Fixes: 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") Cc: stable@vger.kernel.org Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cosmin Ratiu [Wed, 18 Feb 2026 07:29:03 +0000 (09:29 +0200)]
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary.
Gal Pressman [Wed, 18 Feb 2026 07:29:02 +0000 (09:29 +0200)]
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
The macsec_aso_set_arm_event function calls mlx5_aso_poll_cq once
without a retry loop. If the CQE is not immediately available after
posting the WQE, the function fails unnecessarily.
Use read_poll_timeout() to poll 3-10 usecs for CQE, consistent with
other ASO polling code paths in the driver.
Fixes: 739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260218072904.1764634-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Wed, 18 Feb 2026 07:29:01 +0000 (09:29 +0200)]
net/mlx5: Fix misidentification of write combining CQE during poll loop
The write combining completion poll loop uses usleep_range() which can
sleep much longer than requested due to scheduler latency. Under load,
we witnessed a 20ms+ delay until the process was rescheduled, causing
the jiffies based timeout to expire while the thread is sleeping.
The original do-while loop structure (poll, sleep, check timeout) would
exit without a final poll when waking after timeout, missing a CQE that
arrived during sleep.
Instead of the open-coded while loop, use the kernel's poll_timeout_us()
which always performs an additional check after the sleep expiration,
and is less error-prone.
Note: poll_timeout_us() doesn't accept a sleep range, by passing 10
sleep_us the sleep range effectively changes from 2-10 to 3-10 usecs.
Fixes: d98995b4bf98 ("net/mlx5: Reimplement write combining test") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260218072904.1764634-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal Pressman [Wed, 18 Feb 2026 07:29:00 +0000 (09:29 +0200)]
net/mlx5e: Fix misidentification of ASO CQE during poll loop
The ASO completion poll loop uses usleep_range() which can sleep much
longer than requested due to scheduler latency. Under load, we witnessed
a 20ms+ delay until the process was rescheduled, causing the jiffies
based timeout to expire while the thread is sleeping.
The original do-while loop structure (poll, sleep, check timeout) would
exit without a final poll when waking after timeout, missing a CQE that
arrived during sleep.
Instead of the open-coded while loop, use the kernel's
read_poll_timeout() which always performs an additional check after the
sleep expiration, and is less error-prone.
Note: read_poll_timeout() doesn't accept a sleep range, by passing 10
sleep_us the sleep range effectively changes from 2-10 to 3-10 usecs.
Fixes: 739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context") Fixes: 7e3fce82d945 ("net/mlx5e: Overcome slow response for first macsec ASO WQE") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260218072904.1764634-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shay Drory [Wed, 18 Feb 2026 07:28:59 +0000 (09:28 +0200)]
net/mlx5: Fix multiport device check over light SFs
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hangbin Liu [Wed, 18 Feb 2026 06:09:19 +0000 (06:09 +0000)]
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
The ALB RX path may access rx_hashtbl concurrently with bond
teardown. During rapid bond up/down cycles, rlb_deinitialize()
frees rx_hashtbl while RX handlers are still running, leading
to a null pointer dereference detected by KASAN.
However, the root cause is that rlb_arp_recv() can still be accessed
after setting recv_probe to NULL, which is actually a use-after-free
(UAF) issue. That is the reason for using the referenced commit in the
Fixes tag.
The issue is reproducible by repeatedly running
ip link set bond0 up/down while receiving ARP messages, where
rlb_arp_recv() can race with rlb_deinitialize() and dereference
a freed rx_hashtbl entry.
Fix this by setting recv_probe to NULL and then calling
synchronize_net() to wait for any concurrent RX processing to finish.
This ensures that no RX handler can access rx_hashtbl after it is freed
in bond_alb_deinitialize().
Reported-by: Liang Li <liali@redhat.com> Fixes: 3aba891dde38 ("bonding: move processing of recv handlers into handle_frame()") Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Jay Vosburgh <jv@jvosburgh.net> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20260218060919.101574-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vikas Gupta [Wed, 18 Feb 2026 05:27:55 +0000 (10:57 +0530)]
bnge: fix reserving resources from FW
HWRM_FUNC_CFG is used to reserve resources, whereas HWRM_FUNC_QCFG is
intended for querying resource information from the firmware.
Since __bnge_hwrm_reserve_pf_rings() reserves resources for a specific
PF, the command type should be HWRM_FUNC_CFG.
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
Save a local pointer to new_sock->sk and hold a reference before
installing callbacks in rds_tcp_accept_one. After
rds_tcp_set_callbacks() or rds_tcp_reset_callbacks(), tc->t_sock is
set to new_sock which may race with the shutdown path. A concurrent
rds_tcp_conn_path_shutdown() may call sock_release(), which sets
new_sock->sk = NULL and may eventually free sk when the refcount
reaches zero.
Subsequent accesses to new_sock->sk->sk_state would dereference NULL,
causing the crash. The fix saves a local sk pointer before callbacks
are installed so that sk_state can be accessed safely even after
new_sock->sk is nulled, and uses sock_hold()/sock_put() to ensure
sk itself remains valid for the duration.
Fixes: 826c1004d4ae ("net/rds: rds_tcp_conn_path_shutdown must not discard messages") Reported-by: syzbot+96046021045ffe6d7709@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=96046021045ffe6d7709 Signed-off-by: Allison Henderson <achender@kernel.org> Link: https://patch.msgid.link/20260216222643.2391390-1-achender@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Thu, 19 Feb 2026 05:40:16 +0000 (21:40 -0800)]
Merge tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
Linus Torvalds [Thu, 19 Feb 2026 04:50:32 +0000 (20:50 -0800)]
Merge tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
As per design, AF should update the default MCAM action only when
mcam_index is -1. A bug in the previous patch caused default entries
to be changed even when the request was not for them.
Jakub Kicinski [Thu, 19 Feb 2026 01:09:30 +0000 (17:09 -0800)]
Merge tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Add missing __rcu annotations to NAT helper hook pointers in Amanda,
FTP, IRC, SNMP and TFTP helpers. From Sun Jian.
2-4):
- Add global spinlock to serialize nft_counter fetch+reset operations.
- Use atomic64_xchg() for nft_quota reset instead of read+subtract pattern.
Note AI review detects a race in this change but it isn't new. The
'racing' bit only exists to prevent constant stream of 'quota expired'
notifications.
- Revert commit_mutex usage in nf_tables reset path, it caused
circular lock dependency. All from Brian Witte.
5) Fix uninitialized l3num value in nf_conntrack_h323 helper.
6) Fix musl libc compatibility in netfilter_bridge.h UAPI header. This
change isn't nice (UAPI headers should not include libc headers), but
as-is musl builds may fail due to redefinition of struct ethhdr.
7) Fix protocol checksum validation in IPVS for IPv6 with extension headers,
from Julian Anastasov.
8) Fix device reference leak in IPVS when netdev goes down. Also from
Julian.
9) Remove WARN_ON_ONCE when accessing forward path array, this can
trigger with sufficiently long forward paths. From Pablo Neira Ayuso.
10) Fix use-after-free in nf_tables_addchain() error path, from Inseo An.
* tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix use-after-free in nf_tables_addchain()
net: remove WARN_ON_ONCE when accessing forward path array
ipvs: do not keep dest_dst if dev is going down
ipvs: skip ipv6 extension headers for csum checks
include: uapi: netfilter_bridge.h: Cover for musl libc
netfilter: nf_conntrack_h323: don't pass uninitialised l3num value
netfilter: nf_tables: revert commit_mutex usage in reset path
netfilter: nft_quota: use atomic64_xchg for reset
netfilter: nft_counter: serialize reset with spinlock
netfilter: annotate NAT helper hook pointers with __rcu
====================
Tariq Toukan [Tue, 17 Feb 2026 07:45:25 +0000 (09:45 +0200)]
net/mlx5e: XSK, Fix unintended ICOSQ change
XSK wakeup must use the async ICOSQ (with proper locking), as it is not
guaranteed to run on the same CPU as the channel.
The commit that converted the NAPI trigger path to use the sync ICOSQ
incorrectly applied the same change to XSK, causing XSK wakeups to use
the sync ICOSQ as well. Revert XSK flows to use the async ICOSQ.
XDP program attach/detach triggers channel reopen, while XSK pool
enable/disable can happen on-the-fly via NDOs without reopening
channels. As a result, xsk_pool state cannot be reliably used at
mlx5e_open_channel() time to decide whether an async ICOSQ is needed.
Update the async_icosq_needed logic to depend on the presence of an XDP
program rather than the xsk_pool, ensuring the async ICOSQ is available
when XSK wakeups are enabled.
This fixes multiple issues:
1. Illegal synchronize_rcu() in an RCU read- side critical section via
mlx5e_xsk_wakeup() -> mlx5e_trigger_napi_icosq() ->
synchronize_net(). The stack holds RCU read-lock in xsk_poll().
2. Hitting a NULL pointer dereference in mlx5e_xsk_wakeup():
Jakub Kicinski [Thu, 19 Feb 2026 00:46:38 +0000 (16:46 -0800)]
Merge branch 'icmp-better-deal-with-ddos'
Eric Dumazet says:
====================
icmp: better deal with DDOS
When dealing with death of big UDP servers, admins might want to
increase net.ipv4.icmp_msgs_per_sec and net.ipv4.icmp_msgs_burst
to big values (2,000,000 or more).
They also might need to tune the per-host ratelimit to 1ms or 0ms
in favor of the global rate limit.
This series fixes bugs showing up in all these needs.
====================
Eric Dumazet [Mon, 16 Feb 2026 14:28:30 +0000 (14:28 +0000)]
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
Following part was needed before the blamed commit, because
inet_getpeer_v6() second argument was the prefix.
/* Give more bandwidth to wider prefixes. */
if (rt->rt6i_dst.plen < 128)
tmo >>= ((128 - rt->rt6i_dst.plen)>>5);
Now inet_getpeer_v6() retrieves hosts, we need to remove
@tmo adjustement or wider prefixes likes /24 allow 8x
more ICMP to be sent for a given ratelimit.
As we had this issue for a while, this patch changes net.ipv6.icmp.ratelimit
default value from 1000ms to 100ms to avoid potential regressions.
Also add a READ_ONCE() when reading net->ipv6.sysctl.icmpv6_time.
Fixes: fd0273d7939f ("ipv6: Remove external dependency on rt6i_dst and rt6i_src") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20260216142832.3834174-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 16 Feb 2026 14:28:29 +0000 (14:28 +0000)]
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp_global_credit was meant to be changed ~1000 times per second,
but if an admin sets net.ipv4.icmp_msgs_per_sec to a very high value,
icmp_global_credit changes can inflict false sharing to surrounding
fields that are read mostly.
Move icmp_global_credit and icmp_global_stamp to a separate
cacheline aligned group.
Fixes: b056b4cd9178 ("icmp: move icmp_global.credit and icmp_global.stamp to per netns storage") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260216142832.3834174-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with xxd,
and a switch to hexdump has been done in commit b640d556a2b3
("selftests/bpf: Remove xxd util dependency").
hexdump is a more common utility program, yet it might not be installed
by default. When it is not installed, BPF selftests build without
errors, but tests_progs is unusable: it exits with the 255 code and
without any error messages. When manually reproducing the issue, it is
not too hard to find out that the generated verification_cert.h file is
incorrect, but that's time consuming. When digging the BPF selftests
build logs, this line can be seen amongst thousands others, but ignored:
/bin/sh: 2: hexdump: not found
Here, od is used instead of hexdump. od is coming from the coreutils
package, and this new od command produces the same output when using od
from GNU coreutils, uutils, and even busybox. This is more portable, and
it produces a similar results to what was done before with hexdump:
there is an extra comma at the end instead of trailing whitespaces,
but the C code is not impacted.
Ihor Solodrai [Wed, 18 Feb 2026 21:56:51 +0000 (13:56 -0800)]
libbpf: Remove extern declaration of bpf_stream_vprintk()
An issue was reported that building BPF program which includes both
vmlinux.h and bpf_helpers.h from libbpf fails due to conflicting
declarations of bpf_stream_vprintk().
Remove the extern declaration from bpf_helpers.h to address this.
In order to use bpf_stream_printk() macro, BPF programs are expected
to either include vmlinux.h of the kernel they are targeting, or add
their own extern declaration.
Ihor Solodrai [Wed, 18 Feb 2026 21:56:50 +0000 (13:56 -0800)]
selftests/bpf: Use vmlinux.h in test_xdp_meta
- Replace linux/* includes with vmlinux.h
- Include errno.h
- Include bpf_tracing_net.h for TC_ACT_* and ETH_*
- Use BPF_STDERR instead of BPF_STREAM_STDERR
Linus Torvalds [Wed, 18 Feb 2026 22:33:18 +0000 (14:33 -0800)]
Merge tag 'thermal-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"This fixes a sysfs group leak on DLVR registration failure in the
Intel int340x thermal driver (Kaushlendra Kumar)"
* tag 'thermal-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Fix sysfs group leak on DLVR registration failure
Linus Torvalds [Wed, 18 Feb 2026 22:28:57 +0000 (14:28 -0800)]
Merge tag 'acpi-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI support updates from Rafael J. Wysocki:
"These are mostly fixes and cleanups on top of the ACPI support updates
merged recently, including two new quirks, an ACPI CPPC library fix,
and fixes and cleanups of a few core ACPI device drivers:
- Add an unused power resource handling quirk for THUNDEROBOT ZERO
(Zhai Can)
- Fix remaining for_each_possible_cpu() in the ACPI CPPC library to
use online CPUs (Sean V Kelley)
- Drop redundant checks from the ACPI notify handler and the driver
remove callback in the ACPI battery driver (Rafael Wysocki)
- Move the creation of the wakeup source during the ACPI button
driver probe to an earlier point to avoid missing a wakeup event
due to a race and clean up system wakeup handling and remove
callback in that driver (Rafael Wysocki)
- Drop unnecessary driver_data pointer clearing from the ACPI EC and
SMBUS HC drivers and make the ACPI backlight (video) driver clear
the device's driver_data pointer on remove (Rafael Wysocki)
- Force enabling of PWM2 on the Yogabook YB1-X90 tablets (Yauhen
Kharuzhy)"
* tag 'acpi-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Add unused power resource quirk for THUNDEROBOT ZERO
ACPI: driver: Drop driver_data pointer clearing from two drivers
ACPI: video: Clear driver_data pointer on remove
ACPI: button: Tweak acpi_button_remove()
ACPI: button: Tweak system wakeup handling
ACPI: battery: Drop redundant checks from acpi_battery_remove()
ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs
ACPI: x86: Force enabling of PWM2 on the Yogabook YB1-X90
ACPI: button: Call device_init_wakeup() earlier during probe
ACPI: battery: Drop redundant check from acpi_battery_notify()
Linus Torvalds [Wed, 18 Feb 2026 22:11:47 +0000 (14:11 -0800)]
Merge tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the power management updates merged
recently in cpuidle governors, in the Intel RAPL power capping driver
and in the wake IRQ management code:
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add
all package CPUs to the PMU cpumask to allow tools to read RAPL
events from any CPU in the package (Kuppuswamy Satharayananyan)
- Rework the invalid version check in the intel_rapl_tpmi power
capping driver to account for the fact that on partitioned systems,
multiple TPMI instances may exist per package, but RAPL registers
are only valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass
the governor in those cases and adjust the other existing governors
to that change (Aboorva Devarajan, Christian Loehle)
- Update kerneldoc comments for wake IRQ management functions that
have not been matching the code (Wang Jiayue)"
* tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Remove single state handling
cpuidle: teo: Remove single state handling
cpuidle: haltpoll: Remove single state handling
cpuidle: Skip governor when only one idle state is available
powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
PM: sleep: wakeirq: Update outdated documentation comments
Documentation: PM: Document intel_idle.table command line option
powercap: intel_rapl: Expose all package CPUs in PMU cpumask
powercap: intel_rapl: Remove incorrect CPU check in PMU context
Merge branches 'acpi-battery', 'acpi-button' and 'acpi-driver'
Merge additional updates of multiple core ACPI device drivers (battery,
button, video, EC, SMBUS HC) for 7.0-rc1:
- Drop redundant checks from the ACPI notify handler and the driver
remove callback in the ACPI battery driver (Rafael Wysocki)
- Move the creation of the wakeup source during the ACPI button driver
probe to an earlier point to avoid missing a wakeup event due to a
race and clean up system wakeup handling and remove callback in that
driver (Rafael Wysocki)
- Drop unnecessary driver_data pointer clearing from the ACPI EC and
SMBUS HC drivers and make the ACPI backlight (video) driver clear the
device's driver_data pointer on remove (Rafael Wysocki)
* acpi-battery:
ACPI: battery: Drop redundant checks from acpi_battery_remove()
ACPI: battery: Drop redundant check from acpi_battery_notify()
* acpi-button:
ACPI: button: Tweak acpi_button_remove()
ACPI: button: Tweak system wakeup handling
ACPI: button: Call device_init_wakeup() earlier during probe
* acpi-driver:
ACPI: driver: Drop driver_data pointer clearing from two drivers
ACPI: video: Clear driver_data pointer on remove
Merge additional power capping and cpuidle updates for 7.0-rc1:
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add all
package CPUs to the PMU cpumask to allow tools to read RAPL events
from any CPU in the package (Kuppuswamy Sathyanarayanan)
- Rework the invalid version check in the intel_rapl_tpmi power capping
driver to account for the fact that on partitioned systems, multiple
TPMI instances may exist per package, but RAPL registers are only
valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass the
governor in those cases and adjust the other existing governors to
that change (Aboorva Devarajan, Christian Loehle)
* pm-powercap:
powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
powercap: intel_rapl: Expose all package CPUs in PMU cpumask
powercap: intel_rapl: Remove incorrect CPU check in PMU context
* pm-cpuidle:
cpuidle: menu: Remove single state handling
cpuidle: teo: Remove single state handling
cpuidle: haltpoll: Remove single state handling
cpuidle: Skip governor when only one idle state is available
Documentation: PM: Document intel_idle.table command line option
Linus Torvalds [Wed, 18 Feb 2026 18:45:36 +0000 (10:45 -0800)]
Merge tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove macros from proc handler converters
Replace the proc converter macros with "regular" functions. Though it
is more verbose than the macro version, it helps when debugging and
better aligns with coding-style.rst.
- General cleanup
Remove superfluous ctl_table forward declarations. Const qualify the
memory_allocation_profiling_sysctl and loadpin_sysctl_table arrays.
Add missing kernel doc to proc_dointvec_conv.
- Testing
This series was run through sysctl selftests/kunit test suite in
x86_64. And went into linux-next after rc4, giving it a good 3 weeks
of testing
* tag 'sysctl-7.00-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions
sysctl: Replace unidirectional INT converter macros with functions
sysctl: Add kernel doc to proc_douintvec_conv
sysctl: Replace UINT converter macros with functions
sysctl: Add CONFIG_PROC_SYSCTL guards for converter macros
sysctl: clarify proc_douintvec_minmax doc
sysctl: Return -ENOSYS from proc_douintvec_conv when CONFIG_PROC_SYSCTL=n
sysctl: Remove unused ctl_table forward declarations
loadpin: Implement custom proc_handler for enforce
alloc_tag: move memory_allocation_profiling_sysctls into .rodata
sysctl: Add missing kernel-doc for proc_dointvec_conv
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached.
Fixes: 1b0a3950dbd4 ("eth: fbnic: Add XDP pass, drop, abort support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The range size can be 65536 when the requested range covers all possible
u16 queue IDs (e.g. queue_mapping=0 and queue_mapping_max=U16_MAX).
That value cannot be represented in a u16 and previously wrapped to 0,
so tcf_skbedit_hash() could trigger a divide-by-zero:
Add documentation for the vsock per-namespace sysctls (`ns_mode` and
`child_ns_mode`) to Documentation/admin-guide/sysctl/net.rst.
These sysctls were introduced by commit eafb64f40ca4 ("vsock: add
netns to vsock core").
Document the two namespace modes (`global` and `local`), the
inheritance behavior of `child_ns_mode`, and the restriction preventing
local namespaces from setting `child_ns_mode` to `global`.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20260216163147.236844-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Fri, 13 Feb 2026 14:25:57 +0000 (14:25 +0000)]
macvlan: observe an RCU grace period in macvlan_common_newlink() error path
valis reported that a race condition still happens after my prior patch.
macvlan_common_newlink() might have made @dev visible before
detecting an error, and its caller will directly call free_netdev(dev).
We must respect an RCU period, either in macvlan or the core networking
stack.
After adding a temporary mdelay(1000) in macvlan_forward_source_one()
to open the race window, valis repro was:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
(ip link add invalid% link p2 type macvlan mode source macaddr add
00:00:00:00:00:20 &) ; sleep 0.5 ; ping -c1 -I p1 1.2.3.4
PING 1.2.3.4 (1.2.3.4): 56 data bytes
RTNETLINK answers: Invalid argument
BUG: KASAN: slab-use-after-free in macvlan_forward_source
(drivers/net/macvlan.c:408 drivers/net/macvlan.c:444)
Read of size 8 at addr ffff888016bb89c0 by task e/175
Jakub Kicinski [Sat, 14 Feb 2026 03:51:59 +0000 (19:51 -0800)]
selftests: tc_actions: don't dump 2MB of \0 to stdout
Since we started running selftests in NIPA we have been seeing
tc_actions.sh generate a soft lockup warning on ~20% of the runs.
On the pre-netdev foundation setup it was actually a missed irq
splat from the console. Now it's either that or a lockup.
I initially suspected a socket locking issue since the test
is exercising local loopback with act_mirred.
After hours of staring at this I noticed in strace that ncat
when -o $file is specified _both_ saves the output to the file
and still prints it to stdout. Because the file being sent
is constructed with:
the data printed is all \0. Most terminals don't display nul
characters (and neither does vng output capture save them).
But QEMU's serial console still has to poke them thru which
is very slow and causes the lockup (if the file is >600kB).
Replace the '-o $file' with '> $file'. This speeds the test up
from 2m20s to 18s on debug kernels, and prevents the warnings.
ipv6: addrconf: reduce default temp_valid_lft to 2 days
This is a recommendation from RFC 8981 and it was intended to be changed
by commit 969c54646af0 ("ipv6: Implement draft-ietf-6man-rfc4941bis")
but it only changed the sysctl documentation.
Eric Dumazet [Mon, 16 Feb 2026 10:01:49 +0000 (10:01 +0000)]
ping: annotate data-races in ping_lookup()
isk->inet_num, isk->inet_rcv_saddr and sk->sk_bound_dev_if
are read locklessly in ping_lookup().
Add READ_ONCE()/WRITE_ONCE() annotations.
The race on isk->inet_rcv_saddr is probably coming from IPv6 support,
but does not deserve a specific backport.
Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260216100149.3319315-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Mon, 16 Feb 2026 19:40:07 +0000 (20:40 +0100)]
dpll: zl3073x: Fix ref frequency setting
The frequency for an input reference is computed as:
frequency = freq_base * freq_mult * freq_ratio_m / freq_ratio_n
Before commit 5bc02b190a3fb ("dpll: zl3073x: Cache all reference
properties in zl3073x_ref"), zl3073x_dpll_input_pin_frequency_set()
explicitly wrote 1 to both the REF_RATIO_M and REF_RATIO_N hardware
registers whenever a new frequency was set. This ensured the FEC ratio
was always reset to 1:1 alongside the new base/multiplier values.
The refactoring in that commit introduced zl3073x_ref_freq_set() to
update the cached ref state, but this helper only sets freq_base and
freq_mult without resetting freq_ratio_m and freq_ratio_n to 1. Because
zl3073x_ref_state_set() uses a compare-and-write strategy, unchanged
ratio fields are never written to the hardware. If the device previously
had non-unity FEC ratio values, they remain in effect after a frequency
change, resulting in an incorrect computed frequency.
Explicitly set freq_ratio_m and freq_ratio_n to 1 in zl3073x_ref_freq_set()
to restore the original behavior.
Fixes: 5bc02b190a3fb ("dpll: zl3073x: Cache all reference properties in zl3073x_ref") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20260216194007.680416-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 16 Feb 2026 19:36:53 +0000 (19:36 +0000)]
net: do not delay zero-copy skbs in skb_attempt_defer_free()
After the blamed commit, TCP tx zero copy notifications could be
arbitrarily delayed and cause regressions in applications waiting
for them.
Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: e20dfbad8aab ("net: fix napi_consume_skb() with alien skbs") Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20260216193653.627617-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Mon, 16 Feb 2026 10:54:54 +0000 (11:54 +0100)]
net: psp: select CONFIG_SKB_EXTENSIONS
psp now uses skb extensions, failing to build when that is disabled:
In file included from include/net/psp.h:7,
from net/psp/psp_sock.c:9:
include/net/psp/functions.h: In function '__psp_skb_coalesce_diff':
include/net/psp/functions.h:60:13: error: implicit declaration of function 'skb_ext_find'; did you mean 'skb_ext_copy'? [-Wimplicit-function-declaration]
60 | a = skb_ext_find(one, SKB_EXT_PSP);
| ^~~~~~~~~~~~
| skb_ext_copy
include/net/psp/functions.h:60:31: error: 'SKB_EXT_PSP' undeclared (first use in this function)
60 | a = skb_ext_find(one, SKB_EXT_PSP);
| ^~~~~~~~~~~
include/net/psp/functions.h:60:31: note: each undeclared identifier is reported only once for each function it appears in
include/net/psp/functions.h: In function '__psp_sk_rx_policy_check':
include/net/psp/functions.h:94:53: error: 'SKB_EXT_PSP' undeclared (first use in this function)
94 | struct psp_skb_ext *pse = skb_ext_find(skb, SKB_EXT_PSP);
| ^~~~~~~~~~~
net/psp/psp_sock.c: In function 'psp_sock_recv_queue_check':
net/psp/psp_sock.c:164:41: error: 'SKB_EXT_PSP' undeclared (first use in this function)
164 | pse = skb_ext_find(skb, SKB_EXT_PSP);
| ^~~~~~~~~~~
Select the Kconfig symbol as we do from its other users.
Fixes: 6b46ca260e22 ("net: psp: add socket security association code") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Daniel Zahka <daniel.zahka@gmail.com> Link: https://patch.msgid.link/20260216105500.2382181-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 17 Feb 2026 19:41:50 +0000 (11:41 -0800)]
bpftool: Fix truncated netlink dumps
Netlink requires that the recv buffer used during dumps is at least
min(PAGE_SIZE, 8k) (see the man page). Otherwise the messages will
get truncated. Make sure bpftool follows this requirement, avoid
missing information on systems with large pages.
Linus Torvalds [Tue, 17 Feb 2026 23:37:06 +0000 (15:37 -0800)]
Merge tag 'ntfs3_for_7.0' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
"New code:
- improve readahead for bitmap initialization and large directory scans
- fsync files by syncing parent inodes
- drop of preallocated clusters for sparse and compressed files
- zero-fill folios beyond i_valid in ntfs_read_folio()
- implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
- implement iomap-based file operations
- allow explicit boolean acl/prealloc mount options
- fall-through between switch labels
- delayed-allocation (delalloc) support
Fixes:
- check return value of indx_find to avoid infinite loop
- initialize new folios before use
- infinite loop in attr_load_runs_range on inconsistent metadata
- infinite loop triggered by zero-sized ATTR_LIST
- ntfs_mount_options leak in ntfs_fill_super()
- deadlock in ni_read_folio_cmpr
- circular locking dependency in run_unpack_ex
- prevent infinite loops caused by the next valid being the same
- restore NULL folio initialization in ntfs_writepages()
- slab-out-of-bounds read in DeleteIndexEntryRoot
Updates:
- allow readdir() to finish after directory mutations without rewinddir()
- handle attr_set_size() errors when truncating files
- make ntfs_writeback_ops static
- refactor duplicate kmemdup pattern in do_action()
- avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
Replaced:
- use wait_on_buffer() directly
- rename ni_readpage_cmpr into ni_read_folio_cmpr"
* tag 'ntfs3_for_7.0' of https://github.com/Paragon-Software-Group/linux-ntfs3: (26 commits)
fs/ntfs3: add delayed-allocation (delalloc) support
fs/ntfs3: avoid calling run_get_entry() when run == NULL in ntfs_read_run_nb_ra()
fs/ntfs3: add fall-through between switch labels
fs/ntfs3: allow explicit boolean acl/prealloc mount options
fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot
ntfs3: Restore NULL folio initialization in ntfs_writepages()
ntfs3: Refactor duplicate kmemdup pattern in do_action()
fs/ntfs3: prevent infinite loops caused by the next valid being the same
fs/ntfs3: make ntfs_writeback_ops static
ntfs3: fix circular locking dependency in run_unpack_ex
fs/ntfs3: implement iomap-based file operations
fs/ntfs3: fix deadlock in ni_read_folio_cmpr
fs/ntfs3: implement llseek SEEK_DATA/SEEK_HOLE by scanning data runs
fs/ntfs3: zero-fill folios beyond i_valid in ntfs_read_folio()
fs/ntfs3: handle attr_set_size() errors when truncating files
fs/ntfs3: drop preallocated clusters for sparse and compressed files
fs/ntfs3: fsync files by syncing parent inodes
fs/ntfs3: fix ntfs_mount_options leak in ntfs_fill_super()
fs/ntfs3: allow readdir() to finish after directory mutations without rewinddir()
fs/ntfs3: improve readahead for bitmap initialization and large directory scans
...
Linus Torvalds [Tue, 17 Feb 2026 23:18:51 +0000 (15:18 -0800)]
Merge tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"This adds support for the upcoming aes256k key type in CephX that is
based on Kerberos 5 and brings a bunch of assorted CephFS fixes from
Ethan and Sam. One of Sam's patches in particular undoes a change in
the fscrypt area that had an inadvertent side effect of making CephFS
behave as if mounted with wsize=4096 and leading to the corresponding
degradation in performance, especially for sequential writes"
* tag 'ceph-for-7.0-rc1' of https://github.com/ceph/ceph-client:
ceph: assert loop invariants in ceph_writepages_start()
ceph: remove error return from ceph_process_folio_batch()
ceph: fix write storm on fscrypted files
ceph: do not propagate page array emplacement errors as batch errors
ceph: supply snapshot context in ceph_uninline_data()
ceph: supply snapshot context in ceph_zero_partial_object()
libceph: adapt ceph_x_challenge_blob hashing and msgr1 message signing
libceph: add support for CEPH_CRYPTO_AES256KRB5
libceph: introduce ceph_crypto_key_prepare()
libceph: generalize ceph_x_encrypt_offset() and ceph_x_encrypt_buflen()
libceph: define and enforce CEPH_MAX_KEY_LEN
Linus Torvalds [Tue, 17 Feb 2026 23:08:24 +0000 (15:08 -0800)]
Merge tag 'ovl-update-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs update from Amir Goldstein:
"Relax the semantics of uuid=off to cater to a use case of overlayfs
lower layers on btrfs clones, whose UUID are ephemeral and an upper
layer on a different filesystem"
* tag 'ovl-update-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: relax requirement for uuid=off,index=on
Linus Torvalds [Tue, 17 Feb 2026 23:02:49 +0000 (15:02 -0800)]
Merge tag 'v7.0-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix three potential double free vulnerabilities
- Fix data corruption due to racy lease checks
- Enforce SMB1 signing verification checks
- Fix invalid mount option parsing
- Remove unneeded tracepoint
- Various minor error code corrections
- Minor cleanup
* tag 'v7.0-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: terminate session upon failed client required signing
cifs: some missing initializations on replay
cifs: remove unnecessary tracing after put tcon
cifs: update internal module version number
smb: client: fix data corruption due to racy lease checks
smb/client: move NT_STATUS_MORE_ENTRIES
smb/client: rename to NT_ERROR_INVALID_DATATYPE
smb/client: rename to NT_STATUS_SOME_NOT_MAPPED
smb/client: map NT_STATUS_PRIVILEGE_NOT_HELD
smb/client: map NT_STATUS_MORE_PROCESSING_REQUIRED
smb/client: map NT_STATUS_BUFFER_OVERFLOW
smb/client: map NT_STATUS_NOTIFY_ENUM_DIR
cifs: SMB1 split: Remove duplicate include of cifs_debug.h
smb: client: fix regression with mount options parsing
====================
libbpf: Fix perm errors for LDIMM_64_FULL_RANGE_OFF
Commit 728ff167910e ("libbpf: Add gating for arena globals relocation feature")
adds a feature flag for testing whether the running kernel supports LDIMM64
instructions with large direct offsets. Fix two edge cases that can
cause unexpected -EPERM errors in two ways:
1) The probe program used for the feature has type TRACEPOINT, but it's
possible the caller does not have permission to load it, even if it is
able to do so for generic BPF programs. Use the SOCKET_FILTER type
instead that requires fewer permissions. This does not affect the check
itself, which will always fail verification anyway.
2) The probe is triggered during bpf_object__collect_relos(), itself
called in bpf_object_open(), to compute the arena relocation offsets of
arena variables. However, the caller may not have permissions to load
BPF programs. This is the case in some systems with the bpftool calls made
by the BPF selftests during compilation, e.g., for skeleton generation.
Move all uses of the feature check to bpf_object_prepare() time instead.
Fixes: 728ff167910e ("libbpf: Add gating for arena globals relocation feature") Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
v2 -> v3: https://lore.kernel.org/bpf/20260214021014.15670-1-emil@etsalapatis.com/
- Only zero out the first byte of the log buffer (Andrii)
- Minimize invocations of the feature gate (Andrii)
- Adjust the hash of the original commit post-tree rebase
- Ensure close() is not called on invalid prog_fd in feature probe (Coverity)
====================
Emil Tsalapatis [Tue, 17 Feb 2026 20:43:45 +0000 (15:43 -0500)]
libbpf: Delay feature gate check until object prepare time
Commit 728ff167910e ("libbpf: Add gating for arena globals relocation feature")
adds a feature gate check that loads a map and BPF program to
test the running kernel supports large direct offsets for LDIMM64
instructions. This check is currently used to calculate arena symbol
offsets during bpf_object__collect_relos, itself called by
bpf_object_open.
However, the program calling bpf_object_open may not have the permissions to
load maps and programs. This is the case with the BPF selftests, where
bpftool is invoked at compilation time during skeleton generation. This
causes errors as the feature gate unexpectedly fails with -EPERM.
Avoid this by moving all the use of the FEAT_LDIMM64_FULL_RANGE_OFF feature gate
to BPF object preparation time instead.
Emil Tsalapatis [Tue, 17 Feb 2026 20:43:44 +0000 (15:43 -0500)]
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
Commit 728ff167910e uses a PROG_TYPE_TRACEPOINT BPF test program to
check whether the running kernel supports large LDIMM64 offsets. The
feature gate incorrectly assumes that the program will fail at
verification time with one of two messages, depending on whether the
feature is supported by the running kernel. However,
PROG_TYPE_TRACEPOINT programs may fail to load before verification even
starts, e.g., if the shell does not have the appropriate capabilities.
Use a BPF_PROG_TYPE_SOCKET_FILTER program for the feature gate instead.
Also fix two minor issues. First, ensure the log buffer for the test is
initialized: Failing program load before verification led to libbpf dumping
uninitialized data to stdout. Also, ensure that close() is only called
for program_fd in the probe if the program load actually succeeded. The
call was currently failing silently with -EBADF most of the time.
Linus Torvalds [Tue, 17 Feb 2026 19:47:17 +0000 (11:47 -0800)]
Merge tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
Linus Torvalds [Tue, 17 Feb 2026 19:40:04 +0000 (11:40 -0800)]
Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
Linus Torvalds [Tue, 17 Feb 2026 18:07:13 +0000 (10:07 -0800)]
Merge tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
Linus Torvalds [Tue, 17 Feb 2026 17:36:43 +0000 (09:36 -0800)]
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
Linus Torvalds [Tue, 17 Feb 2026 17:30:52 +0000 (09:30 -0800)]
Merge tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
Linus Torvalds [Tue, 17 Feb 2026 17:20:58 +0000 (09:20 -0800)]
Merge tag 'staging-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.0-rc1. Well, not
that big, just lots of tiny coding style cleanups primarily in one
driver as everyone seems to have glomed onto it for some reason that
escapes me (is there a tutorial out there somewhere pointing people at
this?)
Not much overall, the changes can be summarized as:
- cleanups for the rtl8723bs driver, so many cleanups...
- vme_user driver cleanups
- sm750fb driver cleanups
- tiny greybus driver cleanups
- other really small staging driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (119 commits)
staging: rtl8723bs: refactor ODM_SetIQCbyRFpath to reduce duplication
staging: rtl8723bs: rename CamelCase function Set_MSR to set_msr
staging: rtl8723bs: remove unnecessary blank lines in rtw_io.c
staging: rtl8723bs: remove stale TODO item regarding %pM
staging: rtl8723bs: remove unused allocation wrapper functions
staging: rtl8723bs: use standard skb allocation APIs
staging: rtl8723bs: replace rtw_zmalloc() with kzalloc()
staging: rtl8723bs: replace rtw_malloc() with kmalloc()
staging: rtl8723bs: introduce kmemdup() where applicable
staging: sm750fb: Clean up variable names
staging: rtl8723bs: fix null dereference in find_network
staging: rtl8723bs: use unaligned access macros in rtw_security.c
staging: rtl8723bs: fix potential race in expire_timeout_chk
staging: rtl8723bs: remove dead debugging code in rtw_mlme_ext.c
staging: rtl8723bs: modernize hex output in rtw_report_sec_ie
staging: rtl8723bs: fix spacing around operators
staging: rtl8723bs: rename u1bTmp to val
staging: rtl8723bs: remove unused private debug counters
staging: rtl8723bs: remove thread wraper functions and add IS_ERR() check
staging: rtl8723bs: fix firmware memory leak on error
...
Linus Torvalds [Tue, 17 Feb 2026 17:11:04 +0000 (09:11 -0800)]
Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
Linus Torvalds [Tue, 17 Feb 2026 16:48:45 +0000 (08:48 -0800)]
Merge tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more block updates from Jens Axboe:
- Fix partial IOVA mapping cleanup in error handling
- Minor prep series ignoring discard return value, as
the inline value is always known
- Ensure BLK_FEAT_STABLE_WRITES is set for drbd
- Fix leak of folio in bio_iov_iter_bounce_read()
- Allow IOC_PR_READ_* for read-only open
- Another debugfs deadlock fix
- A few doc updates
* tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq: use NOIO context to prevent deadlock during debugfs creation
blk-stat: convert struct blk_stat_callback to kernel-doc
block: fix enum descriptions kernel-doc
block: update docs for bio and bvec_iter
block: change return type to void
nvmet: ignore discard return value
md: ignore discard return value
block: fix partial IOVA mapping cleanup in blk_rq_dma_map_iova
block: fix folio leak in bio_iov_iter_bounce_read()
block: allow IOC_PR_READ_* ioctls with BLK_OPEN_READ
drbd: always set BLK_FEAT_STABLE_WRITES
Linus Torvalds [Tue, 17 Feb 2026 16:33:49 +0000 (08:33 -0800)]
Merge tag 'io_uring-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more io_uring updates from Jens Axboe:
"This is a mix of cleanups and fixes. No major fixes in here, just a
bunch of little fixes. Some of them marked for stable as it fixes
behavioral issues
- Fix an issue with SOCKET_URING_OP_SETSOCKOPT for netlink sockets,
due to a too restrictive check on it having an ioctl handler
- Remove a redundant SQPOLL check in ring creation
- Kill dead accounting for zero-copy send, which doesn't use ->buf
or ->len post the initial setup
- Fix missing clamp of the allocation hint, which could cause
allocations to fall outside of the range the application asked
for. Still within the allowed limits.
- Fix for IORING_OP_PIPE's handling of direct descriptors
- Tweak to the API for the newly added BPF filters, making them
more future proof in terms of how applications deal with them
- A few fixes for zcrx, fixing a few error handling conditions
- Fix for zcrx request flag checking
- Add support for querying the zcrx page size
- Improve the NO_SQARRAY static branch inc/dec, avoiding busy
conditions causing too much traffic
- Various little cleanups"
* tag 'io_uring-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/bpf_filter: pass in expected filter payload size
io_uring/bpf_filter: move filter size and populate helper into struct
io_uring/cancel: de-unionize file and user_data in struct io_cancel_data
io_uring/rsrc: improve regbuf iov validation
io_uring: remove unneeded io_send_zc accounting
io_uring/cmd_net: fix too strict requirement on ioctl
io_uring: delay sqarray static branch disablement
io_uring/query: add query.h copyright notice
io_uring/query: return support for custom rx page size
io_uring/zcrx: check unsupported flags on import
io_uring/zcrx: fix post open error handling
io_uring/zcrx: fix sgtable leak on mapping failures
io_uring: use the right type for creds iteration
io_uring/openclose: fix io_pipe_fixed() slot tracking for specific slots
io_uring/filetable: clamp alloc_hint to the configured alloc range
io_uring/rsrc: replace reg buffer bit field with flags
io_uring/zcrx: improve types for size calculation
io_uring/tctx: avoid modifying loop variable in io_ring_add_registered_file
io_uring: simplify IORING_SETUP_DEFER_TASKRUN && !SQPOLL check
Christian Loehle [Mon, 16 Feb 2026 18:50:05 +0000 (00:20 +0530)]
cpuidle: menu: Remove single state handling
cpuidle systems where the governor has no choice because there's only
a single idle state are now handled by cpuidle core and bypass the
governor, so remove the related handling.
Christian Loehle [Mon, 16 Feb 2026 18:50:04 +0000 (00:20 +0530)]
cpuidle: teo: Remove single state handling
cpuidle systems where the governor has no choice because there's only
a single idle state are now handled by cpuidle core and bypass the
governor, so remove the related handling.
cpuidle systems where the governor has no choice because there's only
a single idle state are now handled by cpuidle core and bypass the
governor, so remove the related handling.
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Extended the change to drop a redundant local variable ] Link: https://patch.msgid.link/20260216185005.1131593-3-aboorvad@linux.ibm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
projects / thirdparty / kernel / stable.git / log
