In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing
b_tx_status.queue. This change prevents callbacks from using already freed
skb due to anchor was not killed before freeing such skb.
With a quite rare chance, RX report might be problematic to make SW think
a packet is received on 6 GHz band even if the chip does not support 6 GHz
band actually. Since SW won't initialize stuffs for unsupported bands, NULL
dereference will happen then in the sequence, rtw89_vif_rx_stats_iter() ->
rtw89_core_cancel_6ghz_probe_tx(). So, add a check to avoid it.
I tried to fix the stack usage in this function a couple of years ago,
but there is still a problem with the latest gcc versions in some
configurations:
net/caif/cfctrl.c:553:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]
Reduce this once again, with a separate cfctrl_link_setup() function that
holds the bulk of all the local variables. It also turns out that the
param[] array that takes up a large portion of the stack is write-only
and can be left out here.
In function dump_xx_nlmsg(), when realloc() fails to allocate memory,
the original pointer to the buffer is overwritten with NULL. This causes
a memory leak because the previously allocated buffer becomes unreachable
without being freed.
Running 3D applications with SVGA_FORCE_HOST_BACKED=1 or using an
ancient version of mesa was broken because the buffer was pinned in
VMW_BO_DOMAIN_SYS and could not be moved to VMW_BO_DOMAIN_MOB during
validation.
The compat_shader buffer should not pinned.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's") Signed-off-by: Ian Forbes <ian.forbes@broadcom.com> Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://lore.kernel.org/r/20250429203427.1742331-1-ian.forbes@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The netfilter hook is invoked with skb->dev for input netdevice, and
vif_dev for output netdevice. However at the point of invocation, skb->dev
is already set to vif_dev, and MR-forwarded packets are reported with
in=out:
When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8efd ("selftests/bpf: Add sockmap test for redirecting partial skb data") Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/bpf/20250609020910.397930-2-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
We observed an issue from the latest selftest: sockmap_redir where
sk_psock(psock->sk) != psock in the backlog. The root cause is the special
behavior in sockmap_redir - it frequently performs map_update() and
map_delete() on the same socket. During map_update(), we create a new
psock and during map_delete(), we eventually free the psock via rcu_work
in sk_psock_drop(). However, pending workqueues might still exist and not
be processed yet. If users immediately perform another map_update(), a new
psock will be allocated for the same sk, resulting in two psocks pointing
to the same sk.
When the pending workqueue is later triggered, it uses the old psock to
access sk for I/O operations, which is incorrect.
Timing Diagram:
cpu0 cpu1
map_update(sk):
sk->psock = psock1
psock1->sk = sk
map_delete(sk):
rcu_work_free(psock1)
map_update(sk):
sk->psock = psock2
psock2->sk = sk
workqueue:
wakeup with psock1, but the sk of psock1
doesn't belong to psock1
rcu_handler:
clean psock1
free(psock1)
Previously, we used reference counting to address the concurrency issue
between backlog and sock_map_close(). This logic remains necessary as it
prevents the sk from being freed while processing the backlog. But this
patch prevents pending backlogs from using a psock after it has been
stopped.
Note: We cannot call cancel_delayed_work_sync() in map_delete() since this
might be invoked in BPF context by BPF helper, and the function may sleep.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20250609025908.79331-1-jiayuan.chen@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
The subsystem event test enables all "sched" events and makes sure there's
at least 3 different events in the output. It used to cat the entire trace
file to | wc -l, but on slow machines, that could last a very long time.
To solve that, it was changed to just read the first 100 lines of the
trace file. This can cause false failures as some events repeat so often,
that the 100 lines that are examined could possibly be of only one event.
Instead, create an awk script that looks for 3 different events and will
exit out after it finds them. This will find the 3 events the test looks
for (eventually if it works), and still exit out after the test is
satisfied and not cause slower machines to run forever.
The battery manufacturer string was incorrectly null terminated using
bat_model instead of bat_manu. This could result in an unintended
write to the wrong field and potentially incorrect behavior.
fixe the issue by correctly null terminating the bat_manu string.
Fixes: 32890b983086 ("Staging: initial version of the nvec driver") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20250719080755.3954373-1-alok.a.tiwari@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In cpufreq_policy_put_kobj(), policy->rwsem is used. But in
cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error
path via err_kobj_remove or err_min_qos_notifier will be reached and
cpufreq_policy_put_kobj() will be called before policy->rwsem is
initialized. Thus, the calling of init_rwsem() should be moved to where
before these two error paths can be reached.
Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-3-zhenglifeng1@huawei.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The cpufreq-based invariance is enabled in cpufreq_register_driver(),
but never disabled after registration fails. Move the invariance
initialization to where all other initializations have been successfully
done to solve this problem.
Fixes: 874f63531064 ("cpufreq: report whether cpufreq supports Frequency Invariance (FI)") Signed-off-by: Lifeng Zheng <zhenglifeng1@huawei.com> Link: https://patch.msgid.link/20250709104145.2348017-2-zhenglifeng1@huawei.com
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the passive mode, intel_cpufreq_update_pstate() sets HWP_MIN_PERF in
accordance with the target frequency to ensure delivering adequate
performance, but it sets HWP_DESIRED_PERF to 0, so the processor has no
indication that the desired performance level is actually equal to the
floor one. This may cause it to choose a performance point way above
the desired level.
Moreover, this is inconsistent with intel_cpufreq_adjust_perf() which
actually sets HWP_DESIRED_PERF in accordance with the target performance
value.
Address this by adjusting intel_cpufreq_update_pstate() to pass
target_pstate as both the minimum and the desired performance levels
to intel_cpufreq_hwp_update().
Fixes: a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Shashank Balaji <shashank.mahadasyam@sony.com> Link: https://patch.msgid.link/6173276.lOV4Wx5bFT@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 96ffcdf239de ("PM / devfreq: Remove redundant governor_name from
struct devfreq") removes governor_name and uses governor->name to replace
it. But devfreq->governor may be NULL and directly using
devfreq->governor->name may cause null pointer exception. Move the check of
governor to before using governor->name.
The reference manual for the i.MX8MN states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 36ca3c8ccb53 ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reference manual for the i.MX8MM states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
When error is injected with the ERR_FORCE register, then this register
is not auto cleared on clearing the ERR_STATUS register. This causes
repeated interrupts on error injection. To fix, set the ERR_FORCE to
zero along with clearing the ERR_STATUS register after handling error.
This commit fixes a typo introduced in commit ee368a10d0df ("ARM: dts: am335x-boneblack.dts: unique gpio-line-names").
gpio0_7 is located on the P9 header on the BBB.
This was verified with a BeagleBone Black by toggling the pin and
checking with a multimeter that it corresponds to pin 42 on the P9
header.
The get_pd_power_uw() function can crash with a NULL pointer dereference
when em_cpu_get() returns NULL. This occurs when a CPU becomes impossible
during runtime, causing get_cpu_device() to return NULL, which propagates
through em_cpu_get() and leads to a crash when em_span_cpus() dereferences
the NULL pointer.
Add a NULL check after em_cpu_get() and return 0 if unavailable,
matching the existing fallback behavior in __dtpm_cpu_setup().
Fixes: eb82bace8931 ("powercap/drivers/dtpm: Scale the power with the load") Signed-off-by: Sivan Zohar-Kotzer <sivany32@gmail.com> Link: https://patch.msgid.link/20250701221355.96916-1-sivany32@gmail.com
[ rjw: Drop an excess empty code line ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While the code "looks" correct, the compiler has no way to know that
doing "fun" pointer math like this really isn't a write off the end of
the structure as there is no hint anywhere that the structure has data
at the end of it.
This causes the following build warning:
In function 'fortify_memset_chk',
inlined from 'ctx_fire_notification.isra' at drivers/misc/vmw_vmci/vmci_context.c:254:3:
include/linux/fortify-string.h:480:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
480 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So revert it for now and it can come back in the future in a "sane" way
that either correctly makes the structure know that there is trailing
data, OR just the payload structure is properly referenced and zeroed
out.
Fixes: bfb4cf9fb97e ("vmci: Prevent the dispatching of uninitialized payloads") Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Lizhi Xu <lizhi.xu@windriver.com> Link: https://lore.kernel.org/r/20250703171021.0aee1482@canb.auug.org.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because pps_cdev_poll() returns unconditionally EPOLLIN,
a user space program that calls select/poll get always an immediate data
ready-to-read response. As a result the intended use to wait until next
data becomes ready does not work.
User space snippet:
struct pollfd pollfd = {
.fd = open("/dev/pps0", O_RDONLY),
.events = POLLIN|POLLERR,
.revents = 0 };
while(1) {
poll(&pollfd, 1, 2000/*ms*/); // returns immediate, but should wait
if(revents & EPOLLIN) { // always true
struct pps_fdata fdata;
memset(&fdata, 0, sizeof(memdata));
ioctl(PPS_FETCH, &fdata); // currently fetches data at max speed
}
}
Lets remember the last fetch event counter and compare this value
in pps_cdev_poll() with most recent event counter
and return 0 if they are equal.
The reproducer executes the host's unlocked_ioctl call in two different
tasks. When init_context fails, the struct vmci_event_ctx is not fully
initialized when executing vmci_datagram_dispatch() to send events to all
vm contexts. This affects the datagram taken from the datagram queue of
its context by another task, because the datagram payload is not initialized
according to the size payload_size, which causes the kernel data to leak
to the user space.
Before dispatching the datagram, and before setting the payload content,
explicitly set the payload content to 0 to avoid data leakage caused by
incomplete payload initialization.
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path.
The stm32_spi_probe function now includes a check to ensure that the
pointer returned by of_device_get_match_data is not NULL before
accessing its members. This resolves a warning where a potential NULL
pointer dereference could occur when accessing cfg->has_device_mode.
Before accessing the 'has_device_mode' member, we verify that 'cfg' is
not NULL. If 'cfg' is NULL, an error message is logged.
This change ensures that the driver does not attempt to access
configuration data if it is not available, thus preventing a potential
system crash due to a NULL pointer dereference.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310191831.MLwx1c6x-lkp@intel.com/ Fixes: fee681646fc8 ("spi: stm32: disable device mode with st,stm32f4-spi compatible") Link: https://patch.msgid.link/20250616-spi-upstream-v1-2-7e8593f3f75d@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When multiple Apple devices are connected concurrently, the
apple-mfi-fastcharge driver fails to probe the subsequent devices with
the following error:
sysfs: cannot create duplicate filename '/class/power_supply/apple_mfi_fastcharge'
apple-mfi-fastcharge 5-2.4.3.3: probe of 5-2.4.3.3 failed with error -17
This happens because the driver uses a fixed power supply name
("apple_mfi_fastcharge") for all devices, causing a sysfs name
conflict when a second device is connected.
Fix this by generating unique names using the USB bus and device
number (e.g., "apple_mfi_fastcharge_5-12"). This ensures each
connected device gets a unique power supply entry in sysfs.
The change requires storing a copy of the power_supply_desc structure
in the per-device mfi_device struct, since the name pointer needs to
remain valid for the lifetime of the power supply registration.
The variable `of_match` was incorrectly declared as a `bool`.
It is assigned the return value of of_match_device(), which is a pointer of
type `const struct of_device_id *`.
Address and size-cells are 1 and the ftm timer node takes two address
spaces in "reg" property, so this should be in two <> tuples. Change
has no functional impact, but original code is confusing/less readable.
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 and qcom,sps-dma@7ac4000 [1] so adding
"qcom,controlled-remotely" upstream matches the behavior of the
downstream/vendor kernel.
The QMI_DATA_LEN type may have different sizes. Taking the element's
address of that type and interpret it as a smaller sized ones works fine
for little endian platforms but not for big endian ones. Instead use
temporary variables of smaller sized types and cast them correctly to
support big endian platforms.
only the first syscall may fail and set errno, but the second may succeed
and keep errno intact, and the check will falsely pass.
Or if errno happened to be EINVAL before, even the first check may falsely
pass.
Also use EXPECT/ASSERT consistently. Currently there is an inconsistent mix
without obvious reasons for usage of one or another.
In commit 32c9c06adb5b ("ASoC: mediatek: disable buffer pre-allocation")
buffer pre-allocation was disabled to accommodate newer platforms that
have a limited reserved memory region for the audio frontend.
Turns out disabling pre-allocation across the board impacts platforms
that don't have this reserved memory region. Buffer allocation failures
have been observed on MT8173 and MT8183 based Chromebooks under low
memory conditions, which results in no audio playback for the user.
Since some MediaTek platforms already have dedicated reserved memory
pools for the audio frontend, the plan is to enable this for all of
them. This requires device tree changes. As a fallback, reinstate the
original policy of pre-allocating audio buffers at probe time of the
reserved memory pool cannot be found or used.
This patch covers the MT8173, MT8183, MT8186 and MT8192 platforms for
now, the reason being that existing MediaTek platform drivers that
supported reserved memory were all platforms that mainly supported
ChromeOS, and is also the set of devices that I can verify.
Fixes: 32c9c06adb5b ("ASoC: mediatek: disable buffer pre-allocation") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://patch.msgid.link/20250612074901.4023253-7-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the function to dynamically allocate it instead.
There is probably a better way to do it since only two integer fields
inside of that structure are actually used, but this is the simplest
rework for the moment.
Fixes: 783db6851c18 ("ASoC: ops: Enforce platform maximum on initial value") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250610093057.2643233-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7f1186a8d738661 ("ASoC: soc-dai: check return value at
snd_soc_dai_set_tdm_slot()") checks return value of
xlate_tdm_slot_mask() (A1)(A2).
/*
* ...
(Y) * TDM mode can be disabled by passing 0 for @slots. In this case @tx_mask,
* @rx_mask and @slot_width will be ignored.
* ...
*/
int snd_soc_dai_set_tdm_slot(...)
{
...
if (...)
(A1) ret = dai->driver->ops->xlate_tdm_slot_mask(...);
else
(A2) ret = snd_soc_xlate_tdm_slot_mask(...);
if (ret)
goto err;
...
}
snd_soc_xlate_tdm_slot_mask() (A2) will return -EINVAL if slots was 0 (X),
but snd_soc_dai_set_tdm_slot() allow to use it (Y).
(A) static int snd_soc_xlate_tdm_slot_mask(...)
{
...
if (!slots)
(X) return -EINVAL;
...
}
Call xlate_tdm_slot_mask() only if slots was non zero.
Reported-by: Giedrius Trainavičius <giedrius@blokas.io> Closes: https://lore.kernel.org/r/CAMONXLtSL7iKyvH6w=CzPTxQdBECf++hn8RKL6Y4=M_ou2YHow@mail.gmail.com Fixes: 7f1186a8d738661 ("ASoC: soc-dai: check return value at snd_soc_dai_set_tdm_slot()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://patch.msgid.link/8734cdfx59.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a node withdraws and it turns out that it is the only node that has
the filesystem mounted, gfs2 currently tries to replay the local journal
to bring the filesystem back into a consistent state. Not only is that
a very bad idea, it has also never worked because gfs2_recover_func()
will refuse to do anything during a withdraw.
However, before even getting to this point, gfs2_recover_func()
dereferences sdp->sd_jdesc->jd_inode. This was a use-after-free before
commit 04133b607a78 ("gfs2: Prevent double iput for journal on error")
and is a NULL pointer dereference since then.
Simply get rid of self recovery to fix that.
Fixes: 601ef0d52e96 ("gfs2: Force withdraw to replay journals and wait for it to finish") Reported-by: Chunjie Zhu <chunjie.zhu@cloud.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Initially, conditional lock acquisition was removed to fix an xfstest bug
that was observed during internal testing. The deadlock reported by syzbot
is resolved by reintroducing conditional acquisition. The xfstest bug no
longer occurs on kernel version 6.16-rc1 during internal testing. I
assume that changes in other modules may have contributed to this.
Fixes: 69505fe98f19 ("fs/ntfs3: Replace inode_trylock with inode_lock") Reported-by: syzbot+a91fcdbd2698f99db8f4@syzkaller.appspotmail.com Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
To avoid deadlock, Commit 31651c607151 ("hfsplus: avoid deadlock
on file truncation") unlock extree before hfsplus_free_extents(),
and add check wheather extree is locked in hfsplus_free_extents().
However, when operations such as hfsplus_file_release,
hfsplus_setattr, hfsplus_unlink, and hfsplus_get_block are executed
concurrently in different files, it is very likely to trigger the
WARN_ON, which will lead syzbot and xfstest to consider it as an
abnormality.
The comment above this warning also describes one of the easy
triggering situations, which can easily trigger and cause
xfstest&syzbot to report errors.
Several threads could try to lock the shared extents tree.
And warning can be triggered in one thread when another thread
has locked the tree. This is the wrong behavior of the code and
we need to remove the warning.
struct ublk_device's __queues points to an allocation with up to
UBLK_MAX_NR_QUEUES (4096) queues, each of which have:
- struct ublk_queue (48 bytes)
- Tail array of up to UBLK_MAX_QUEUE_DEPTH (4096) struct ublk_io's,
32 bytes each
This means the full allocation can exceed 512 MB, which may well be
impossible to service with contiguous physical pages. Switch to
kvcalloc() and kvfree(), since there is no need for physically
contiguous memory.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver") Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250620151008.3976463-2-csander@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The reproducer uses a file0 on a ntfs3 file system with a corrupted i_link.
When renaming, the file0's inode is marked as a bad inode because the file
name cannot be deleted.
The underlying bug is that make_bad_inode() is called on a live inode.
In some cases it's "icache lookup finds a normal inode, d_splice_alias()
is called to attach it to dentry, while another thread decides to call
make_bad_inode() on it - that would evict it from icache, but we'd already
found it there earlier".
In some it's outright "we have an inode attached to dentry - that's how we
got it in the first place; let's call make_bad_inode() on it just for shits
and giggles".
Fixes: 78ab59fee07f ("fs/ntfs3: Rework file operations") Reported-by: syzbot+1aa90f0eb1fc3e77d969@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=1aa90f0eb1fc3e77d969 Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The macro takes a parameter called "p" but references "fc" internally.
This happens to compile as long as callers pass a variable named fc,
but breaks otherwise. Rename the first parameter to “fc” to match the
usage and to be consistent with warnfc() / errorfc().
Fixes: a3ff937b33d9 ("prefix-handling analogues of errorf() and friends") Signed-off-by: RubenKelevra <rubenkelevra@gmail.com> Link: https://lore.kernel.org/20250617230927.1790401-1-rubenkelevra@gmail.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The move of the module sanity check to earlier skipped the audit logging
call in the case of failure and to a place where the previously used
context is unavailable.
Add an audit logging call for the module loading failure case and get
the module name when possible.
Link: https://issues.redhat.com/browse/RHEL-52839 Fixes: 02da2cbab452 ("module: move check_modinfo() early to early_mod_check()") Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Petr Pavlu <petr.pavlu@suse.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is currently possible to configure a kernel with all Intel SoC
configs as loadable modules, but the board config as built-in. This
causes a link failure in the reference to the snd_soc_sof.ko module:
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'
Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever
the SOF support is in a loadable module, none of the board code can be built-in.
This may be be a little heavy-handed, but I also don't see a reason why one would
want the boards to be built-in but not the SoC, so it shouldn't actually cause
any usability problems.
With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to
compile like:
In function ‘i40e_free_q_vector’,
inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:
571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’
5113 | kfree_rcu(q_vector, rcu);
| ^~~~~~~~~
The problem is that the 'rcu' member in 'q_vector' is too far from the start
of the structure. Move this member before the CPU mask instead, in all three
drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The test depends on commit eb166e522c77 "bpf: Allow helper
bpf_get_[ns_]current_pid_tgid() for all prog types", which was not part of the
stable 6.6 code base, and thus the test will fail. Revert it since it is a
false positive.
Remove incorrect checks on cqspi->rx_chan that cause driver breakage
during failure cleanup. Ensure proper resource freeing on the success
path when operating in cqspi->use_direct_mode, preventing leaks and
improving stability.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://patch.msgid.link/89765a2b94f047ded4f14babaefb7ef92ba07cb2.1751274389.git.khairul.anuar.romli@altera.com Signed-off-by: Mark Brown <broonie@kernel.org>
[Minor conflict resolved due to code context change.] Signed-off-by: Ronald Wahl <ronald.wahl@legrand.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c89 ("drm/amdgpu: drop a dummy wakeup scheduler") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Lin.Cao <lincao12@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com
[ replaced drm_sched_wakeup() calls with drm_sched_wakeup_if_can_queue() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper
flags and language target"), which updated as-instr to use the
'assembler-with-cpp' language option, the Kbuild version of as-instr
always fails internally for arch/arm with
<command-line>: fatal error: asm/unified.h: No such file or directory
compilation terminated.
because '-include' flags are now taken into account by the compiler
driver and as-instr does not have '$(LINUXINCLUDE)', so unified.h is not
found.
This went unnoticed at the time of the Kbuild change because the last
use of as-instr in Kbuild that arch/arm could reach was removed in 5.7
by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support") but a
stable backport of the Kbuild change to before that point exposed this
potential issue if one were to be reintroduced.
Follow the general pattern of '-include' paths throughout the tree and
make unified.h absolute using '$(srctree)' to ensure KBUILD_AFLAGS can
be used independently.
Closes: https://lore.kernel.org/CACo-S-1qbCX4WAVFA63dWfHtrRHZBTyyr2js8Lx=Az03XHTTHg@mail.gmail.com/ Cc: stable@vger.kernel.org Fixes: d5c8d6e0fa61 ("kbuild: Update assembler calls to use proper flags and language target") Reported-by: KernelCI bot <bot@kernelci.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
[ No KBUILD_RUSTFLAGS in <=6.12 ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mptcp_disconnect() clears the fallback bit unconditionally, without
touching the associated flags.
The bit clear is safe, as no fallback operation can race with that --
all subflow are already in TCP_CLOSE status thanks to the previous
FASTCLOSE -- but we need to consistently reset all the fallback related
status.
Also acquire the relevant lock, to avoid fouling static analyzers.
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes: 478d770008b0 ("mptcp: send out MP_FAIL when data checksum fails") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-2-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in subflow.c, because commit f1f26512a9bf ("mptcp: use plain
bool instead of custom binary enum") and commit 46a5d3abedbe
("mptcp: fix typos in comments") are not in this version. Both are
causing conflicts in the context, and the same modifications can still
be applied. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we need to track the 'fallback is possible' condition and the
fallback status separately, there are a few possible races open between
the check and the actual fallback action.
Add a spinlock to protect the fallback related information and use it
close all the possible related races. While at it also remove the
too-early clearing of allow_infinite_fallback in __mptcp_subflow_connect():
the field will be correctly cleared by subflow_finish_connect() if/when
the connection will complete successfully.
If fallback is not possible, as per RFC, reset the current subflow.
Since the fallback operation can now fail and return value should be
checked, rename the helper accordingly.
Fixes: 0530020a7c8f ("mptcp: track and update contiguous data status") Cc: stable@vger.kernel.org Reported-by: Matthieu Baerts <matttbe@kernel.org> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/570 Reported-by: syzbot+5cf807c20386d699b524@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/555 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-1-391aff963322@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in protocol.h, because commit 6ebf6f90ab4a ("mptcp: add
mptcpi_subflows_total counter") is not in this version, and this
causes conflicts in the context. Commit 65b02260a0e0 ("mptcp: export
mptcp_subflow_early_fallback()") is also not in this version, and
moves code from protocol.c to protocol.h, but the modification can
still apply there. ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable ECBHB bits in ID_AA64MMFR1 register as per ARM DDI 0487K.a
specification.
When guest OS read ID_AA64MMFR1_EL1, kvm emulate this reg using
ftr_id_aa64mmfr1 and always return ID_AA64MMFR1_EL1.ECBHB=0 to guest.
It results in guest syscall jump to tramp ventry, which is not needed
in implementation with ID_AA64MMFR1_EL1.ECBHB=1.
Let's make the guest syscall process the same as the host.
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com> Link: https://lore.kernel.org/r/20240611122049.2758600-1-tangnianyao@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ This fixes performance regressions introduced by commit 4117975672c4
("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") for guests running on neoverse v2
hardware, which supports ECBHB. ] Signed-off-by: Patrick Roy <roypat@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
free_transport function for tcp connection can be called from smbdirect.
It will cause kernel oops. This patch add free_transport ops in ksmbd
connection, and add each free_transports for tcp and smbdirect.
Fixes: 21a4e47578d4 ("ksmbd: fix use-after-free in __smb2_lease_break_noti()") Reviewed-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The decap offload configuration should only be applied after the STA has
been successfully initialized. Attempting to configure it earlier can lead
to corruption of the MAC configuration in the chip's hardware state.
Add an early check for `msta->deflink.wcid.sta` to ensure the station peer
is properly initialized before proceeding with decapsulation offload
configuration.
The perf_fuzzer found a hard-lockup crash on a RaptorLake machine:
Oops: general protection fault, maybe for address 0xffff89aeceab400: 0000
CPU: 23 UID: 0 PID: 0 Comm: swapper/23
Tainted: [W]=WARN
Hardware name: Dell Inc. Precision 9660/0VJ762
RIP: 0010:native_read_pmc+0x7/0x40
Code: cc e8 8d a9 01 00 48 89 03 5b cd cc cc cc cc 0f 1f ...
RSP: 000:fffb03100273de8 EFLAGS: 00010046
....
Call Trace:
<TASK>
icl_update_topdown_event+0x165/0x190
? ktime_get+0x38/0xd0
intel_pmu_read_event+0xf9/0x210
__perf_event_read+0xf9/0x210
CPUs 16-23 are E-core CPUs that don't support the perf metrics feature.
The icl_update_topdown_event() should not be invoked on these CPUs.
It's a regression of commit:
f9bdf1f95339 ("perf/x86/intel: Avoid disable PMU if !cpuc->enabled in sample read")
The bug introduced by that commit is that the is_topdown_event() function
is mistakenly used to replace the is_topdown_count() call to check if the
topdown functions for the perf metrics feature should be invoked.
For QPIC V2 onwards there is a separate register to read
last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
qcom_param_page_type_exec() is used to read only one code word
If it configures the number of code words to 1 in QPIC_NAND_DEV0_CFG0
register then QPIC controller thinks its reading the last code word,
since we are having separate register to read the last code word,
we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n" register
to fetch data from QPIC buffer to system memory.
Without this change page read was failing with timeout error
/ # hexdump -C /dev/mtd1
[ 129.206113] qcom-nandc 1cc8000.nand-controller: failure to read page/oob
hexdump: /dev/mtd1: Connection timed out
This issue only seen on SDX targets since SDX target used QPICv2. But
same working on IPQ targets since IPQ used QPICv1.
Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is
referenced when ksmbd server thread terminates, It will not be freed,
but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed
asynchronously when the connection is disconnected. __smb2_lease_break_noti
calls ksmbd_conn_write, which can cause use-after-free
when conn->ksmbd_transport is already freed.
Cc: stable@vger.kernel.org Reported-by: Norbert Szetei <norbert@doyensec.com> Tested-by: Norbert Szetei <norbert@doyensec.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
[ Removed declaration of non-existent function ksmbd_find_netdev_name_iface_list() from transport_tcp.h. ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision`
were assigned in commit d68c592e02f6 ("iio: hid-sensor-prox: Fix scale not
correct issue"), but due to a merge conflict in
commit 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"),
these assignments were lost.
Add back lost assignments and replace `st->prox_attr` with
`st->prox_attr[0]` because commit 596ef5cf654b ("iio: hid-sensor-prox: Add
support for more channels") changed `prox_attr` to an array.
Cc: stable@vger.kernel.org # 5.13+ Fixes: 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next") Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ changed st->prox_attr[0] array access to st->prox_attr single struct member ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
As discussed in the thread containing
https://lore.kernel.org/linux-crypto/20250510053308.GB505731@sol/, the
Power10-optimized Poly1305 code is currently not safe to call in softirq
context. Disable it for now. It can be re-enabled once it is fixed.
Fixes: ba8f8624fde2 ("crypto: poly1305-p10 - Glue code for optmized Poly1305 implementation for ppc64le") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[ applied to arch/powerpc/crypto/Kconfig ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Flush the D-cache before unlocking folios for compressed inodes, as
they are dirtied during decompression.
Avoid calling flush_dcache_folio() on every CPU write, since it's more
like playing whack-a-mole without real benefit.
It has no impact on x86 and arm64/risc-v: on x86, flush_dcache_folio()
is a no-op, and on arm64/risc-v, PG_dcache_clean (PG_arch_1) is clear
for new page cache folios. However, certain ARM boards are affected,
as reported.
This indicates that the pgoff is unaligned. After analysis, I confirm the
vma is mapped to /dev/zero. Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero(). So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.
It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page. But commit d8ea7cc8547c limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().
Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().
Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com Fixes: d8ea7cc8547c ("mm/khugepaged: add flag to predicate khugepaged-only behavior") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mattew Wilcox <willy@infradead.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub: backport, clean apply] Signed-off-by: Jakub Acs <acsjakub@amazon.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On g4x we currently use the 96MHz non-SSC refclk, which can't actually
generate an exact 2.7 Gbps link rate. In practice we end up with 2.688
Gbps which seems to be close enough to actually work, but link training
is currently failing due to miscalculating the DP_LINK_BW value (we
calcualte it directly from port_clock which reflects the actual PLL
outpout frequency).
Ideas how to fix this:
- nudge port_clock back up to 270000 during PLL computation/readout
- track port_clock and the nominal link rate separately so they might
differ a bit
- switch to the 100MHz refclk, but that one should be SSC so perhaps
not something we want
While we ponder about a better solution apply some band aid to the
immediate issue of miscalculated DP_LINK_BW value. With this
I can again use 2.7 Gbps link rate on g4x.
Cc: stable@vger.kernel.org Fixes: 665a7b04092c ("drm/i915: Feed the DPLL output freq back into crtc_state") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250710201718.25310-2-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit a8b874694db5cae7baaf522756f87acd956e6e66) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[ changed display->platform.g4x to IS_G4X(i915) ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update HDA driver to support Tegra264 differences from legacy HDA,
which includes: clocks/resets, always power on, and hardware-managed
FPCI/IPFS initialization. The driver retrieves this chip-specific
information from soc_data.
In `waveform_common_attach()`, the two timers `&devpriv->ai_timer` and
`&devpriv->ao_timer` are initialized after the allocation of the device
private data by `comedi_alloc_devpriv()` and the subdevices by
`comedi_alloc_subdevices()`. The function may return with an error
between those function calls. In that case, `waveform_detach()` will be
called by the Comedi core to clean up. The check that
`waveform_detach()` uses to decide whether to delete the timers is
incorrect. It only checks that the device private data was allocated,
but that does not guarantee that the timers were initialized. It also
needs to check that the subdevices were allocated. Fix it.
This happens when 'clear_inode()' makes an attempt to finalize an underlying
JFS inode of unknown type. According to JFS layout description from
https://jfs.sourceforge.net/project/pub/jfslayout.pdf, inode types from 5 to
15 are reserved for future extensions and should not be encountered on a valid
filesystem. So add an extra check for valid inode type in 'copy_from_dinode()'.
Reported-by: syzbot+ac2116e48989e84a2893@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ac2116e48989e84a2893 Fixes: 79ac5a46c5c1 ("jfs_lookup(): don't bother with . or ..") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Aditya Dutt <duttaditya18@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Zhivich [Wed, 23 Jul 2025 13:40:19 +0000 (09:40 -0400)]
x86/bugs: Fix use of possibly uninit value in amd_check_tsa_microcode()
For kernels compiled with CONFIG_INIT_STACK_NONE=y, the value of __reserved
field in zen_patch_rev union on the stack may be garbage. If so, it will
prevent correct microcode check when consulting p.ucode_rev, resulting in
incorrect mitigation selection.
This is a stable-only fix.
Cc: <stable@vger.kernel.org> Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Fixes: 90293047df18 ("x86/bugs: Add a Transient Scheduler Attacks mitigation") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect
SNKAS.
tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance
testers can interpret the TryWait.Src to Attached.Src transition after
Try.Snk as being in Attached.Src the entire time, so ~170ms is lost
to the debounce timer.
Setting the data role can be a costly operation in host mode, and when
completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4
to fail.
Turn VBUS on before tcpm_set_roles to meet timing requirement.
The funciton tcpm_acc_attach is not setting the proper state when
calling tcpm_set_role. The function tcpm_set_role is currently only
handling TYPEC_STATE_USB. For the tcpm_acc_attach to switch into other
modal states tcpm_set_role needs to be extended by an extra state
parameter. This patch is handling the proper state change when calling
tcpm_acc_attach.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250404-ml-topic-tcpm-v1-3-b99f44badce8@pengutronix.de
Stable-dep-of: bec15191d523 ("usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the process is exiting, the mmput inside mmu notifier callback from
compactd or fork or numa balancing could release the last reference
of mm struct to call exit_mmap and free_pgtable, this triggers deadlock
with below backtrace.
The deadlock will leak kfd process as mmu notifier release is not called
and cause VRAM leaking.
The fix is to take mm reference mmget_non_zero when adding prange to the
deferred list to pair with mmput in deferred list work.
If prange split and add into pchild list, the pchild work_item.mm is not
used, so remove the mm parameter from svm_range_unmap_split and
svm_range_add_child.
Fixes: fa582c6f3684 ("drm/amdkfd: Use mmget_not_zero in MMU notifier") Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a29e067bd38946f752b0ef855f3dfff87e77bec7) Cc: stable@vger.kernel.org
[ updated additional svm_range_add_child calls in svm_range_split_by_granularity to remove mm parameter ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 48b4800a1c6a ("zsmalloc: page migration support") added support for
migrating zsmalloc pages using the movable_operations migration framework.
However, the commit did not take into account that zsmalloc supports
migration only when CONFIG_COMPACTION is enabled. Tracing shows that
zsmalloc was still passing the __GFP_MOVABLE flag even when compaction is
not supported.
This can result in unmovable pages being allocated from movable page
blocks (even without stealing page blocks), ZONE_MOVABLE and CMA area.
Possible user visible effects:
- Some ZONE_MOVABLE memory can be not actually movable
- CMA allocation can fail because of this
- Increased memory fragmentation due to ignoring the page mobility
grouping feature
I'm not really sure who uses kernels without compaction support, though :(
To fix this, clear the __GFP_MOVABLE flag when
!IS_ENABLED(CONFIG_COMPACTION).
Link: https://lkml.kernel.org/r/20250704103053.6913-1-harry.yoo@oracle.com Fixes: 48b4800a1c6a ("zsmalloc: page migration support") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The checksum mode has been added a while ago, but it is only validated
when manually launching mptcp_connect.sh with "-C".
The different CIs were then not validating these MPTCP Connect tests
with checksum enabled. To make sure they do, add a new test program
executing mptcp_connect.sh with the checksum mode.
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
A warning is raised when __request_region() detects a conflict with a
resource whose resource.desc is IORES_DESC_DEVICE_PRIVATE_MEMORY.
But this warning is only valid for iomem_resources.
The hmem device resource uses resource.desc as the numa node id, which can
cause spurious warnings.
This warning appeared on a machine with multiple cxl memory expanders.
One of the NUMA node id is 6, which is the same as the value of
IORES_DESC_DEVICE_PRIVATE_MEMORY.
In this environment it was just a spurious warning, but when I saw the
warning I suspected a real problem so it's better to fix it.
This change fixes this by restricting the warning to only iomem_resource.
This also adds a missing new line to the warning message.
Link: https://lkml.kernel.org/r/20250719112604.25500-1-akinobu.mita@gmail.com Fixes: 7dab174e2e27 ("dax/hmem: Move hmem device registration to dax_hmem.ko") Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To prevent inodes with invalid file types from tripping through the vfs
and causing malfunctions or assertion failures, add a missing sanity check
when reading an inode from a block device. If the file type is not valid,
treat it as a filesystem error.
Since 6ee9b3d84775 ("kasan: remove kasan_find_vm_area() to prevent
possible deadlock"), more detailed info about the vmalloc mapping and the
origin was dropped due to potential deadlocks.
While fixing the deadlock is necessary, that patch was too quick in
killing an otherwise useful feature, and did no due-diligence in
understanding if an alternative option is available.
Restore printing more helpful vmalloc allocation info in KASAN reports
with the help of vmalloc_dump_obj(). Example report:
| BUG: KASAN: vmalloc-out-of-bounds in vmalloc_oob+0x4c9/0x610
| Read of size 1 at addr ffffc900002fd7f3 by task kunit_try_catch/493
|
| CPU: [...]
| Call Trace:
| <TASK>
| dump_stack_lvl+0xa8/0xf0
| print_report+0x17e/0x810
| kasan_report+0x155/0x190
| vmalloc_oob+0x4c9/0x610
| [...]
|
| The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900002fd000 allocated at vmalloc_oob+0x36/0x610
| The buggy address belongs to the physical page:
| page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x126364
| flags: 0x200000000000000(node=0|zone=2)
| raw: 02000000000000000000000000000000dead0000000001220000000000000000
| raw: 0000000000000000000000000000000000000001ffffffff0000000000000000
| page dumped because: kasan: bad access detected
|
| [..]
Link: https://lkml.kernel.org/r/20250716152448.3877201-1-elver@google.com Fixes: 6ee9b3d84775 ("kasan: remove kasan_find_vm_area() to prevent possible deadlock") Signed-off-by: Marco Elver <elver@google.com> Suggested-by: Uladzislau Rezki <urezki@gmail.com> Acked-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Yeoreum Yun <yeoreum.yun@arm.com> Cc: Yunseong Kim <ysk@kzalloc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gve_tx_timeout was calculating missed completions in a way that is only
relevant in the GQ queue format. Additionally, it was attempting to
disable device interrupts, which is not needed in either GQ or DQ queue
formats.
As a result, TX timeouts with the DQ queue format likely would have
triggered early resets without kicking the queue at all.
This patch drops the check for pending work altogether and always kicks
the queue after validating the queue has not seen a TX timeout too
recently.
Cc: stable@vger.kernel.org Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ") Co-developed-by: Tim Hostetler <thostet@google.com> Signed-off-by: Tim Hostetler <thostet@google.com> Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com> Link: https://patch.msgid.link/20250717192024.1820931-1-hramamurthy@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set.
Unfortunately some systems have left the factory with an uninitialized
value of 0xFFFF at register address 0x3F (checksum word location).
So on Tiger Lake platform we ignore the computed checksum when such
condition is encountered.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Tested-by: Vlad URSU <vlad@ursu.me> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Starting from Tiger Lake, LAN NVM is locked for writes by SW, so the
> driver cannot perform checksum validation and correction. This means
> that all NVM images must leave the factory with correct checksum and
> checksum valid bit set. Since Tiger Lake devices were the first to have
> this lock, some systems in the field did not meet this requirement.
> Therefore, for these transitional devices we skip checksum update and
> verification, if the valid bit is not set.
Signed-off-by: Jacek Kowalski <jacek@jacekk.info> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Fixes: 4051f68318ca9 ("e1000e: Do not take care about recovery NVM checksum") Cc: stable@vger.kernel.org Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_switch_port_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 84cba72956fd ("dpaa2-switch: integrate the MAC endpoint support") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-3-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fsl_mc_get_endpoint() function uses device_find_child() for
localization, which implicitly calls get_device() to increment the
device's reference count before returning the pointer. However, the
caller dpaa2_eth_connect_mac() fails to properly release this
reference in multiple scenarios. We should call put_device() to
decrement reference count properly.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250717022309.3339976-2-make24@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change
to different stacks along with the Shadow Call Stack if it is enabled.
Those two stack changes cannot be done atomically and both functions
can be interrupted by SErrors or Debug Exceptions which, though unlikely,
is very much broken : if interrupted, we can end up with mismatched stacks
and Shadow Call Stack leading to clobbered stacks.
In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task,
but x18 stills points to the old task's SCS. When the interrupt handler
tries to save the task's SCS pointer, it will save the old task
SCS pointer (x18) into the new task struct (pointed to by SP_EL0),
clobbering it.
In `call_on_irq_stack()`, it can happen when switching from the task stack
to the IRQ stack and when switching back. In both cases, we can be
interrupted when the SCS pointer points to the IRQ SCS, but SP points to
the task stack. The nested interrupt handler pushes its return addresses
on the IRQ SCS. It then detects that SP points to the task stack,
calls `call_on_irq_stack()` and clobbers the task SCS pointer with
the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS,
or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK
or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and
instead the GIC is responsible for filtering what interrupts the CPU
should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU
even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very*
frequently depending on the system configuration and workload, leading
to unpredictable kernel panics.
Completely mask DAIF in `cpu_switch_to()` and restore it when returning.
Do the same in `call_on_irq_stack()`, but restore and mask around
the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency
of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF,
as the existing one saves but only masks IF.
Cc: <stable@vger.kernel.org> Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Reported-by: Cristian Prundeanu <cpru@amazon.com> Fixes: 59b37fe52f49 ("arm64: Stash shadow stack pointer in the task struct on interrupt") Tested-by: Cristian Prundeanu <cpru@amazon.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20250718142814.133329-1-ada.coupriediaz@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
