Markus Lehtonen [Fri, 26 Aug 2016 07:33:11 +0000 (10:33 +0300)]
oe-build-perf-test: update globalres and git even if tests failed
Write globalres log file and commit results to Git even if some tests
failed. Now that tests do not depend on each other there should be no
risk of bogus results caused by test failures.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Fri, 26 Aug 2016 07:33:10 +0000 (10:33 +0300)]
oeqa.buildperf: treat failed measurements as errors
Now failed measurements correctly cause a test failure (recorded as an
error). There should be no need to continue the test if one step fails,
especially now that the tests don't depend on each other.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen [Fri, 26 Aug 2016 07:33:09 +0000 (10:33 +0300)]
oeqa.buildperf: make tests independent
Add test set-up functionality so that the individual tests do not depend
on each other. This should make sure that a failure in one test does not
affect the results of another test. The patch also makes it reasonable
to run only a subset of the tests by using the --run-tests option.
The increase in total execution time of the full suite - caused by the
additional set-up steps - is insignificant because normally no
additional tasks need to be run. The previous test has already done all
set-up work.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jackie Huang [Tue, 30 Aug 2016 09:03:22 +0000 (17:03 +0800)]
meta-ide-support: inherit nopackages
The recipe is to generate an environment script in
do_populate_ide_support for using an IDE and it
doesn't generate packages at all, so inherit nopackages
Signed-off-by: Jackie Huang <jackie.huang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Tue, 30 Aug 2016 14:19:58 +0000 (16:19 +0200)]
base, autotools: Append PACKAGECONFIG_CONFARGS to EXTRA_OECONF only in autotools.bbclass
* recipes which don't inherit autotools or cmake bbclass and want to
use the configure options from PACKAGECONFIG need to handle
PACKAGECONFIG_CONFARGS themselves.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libglade has been obsolete for several years and is used by nothing in oe-core;
it will be moved to meta-oe so that old recipes still present there continue to build.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nicolas Dechesne [Mon, 29 Aug 2016 09:40:35 +0000 (10:40 +0100)]
gstreamer1.0-plugins-bad: add packageconfig for egl
In commit 9c3a94aea1d (gstreamer1.0-plugins-bad: Move EGL requirement for
Wayland), --enable-egl was explicitely added to the wayland packageconfig. While
this is correct that enabling wayland requires egl, it should be possible to
enable egl without wayland, even when using X11. For example, glimagesink can be
used for GPU based color conversion using EGL/GLES.
As such, let's make egl and wayland two separate PACKAGECONFIG flags.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton [Mon, 29 Aug 2016 08:40:38 +0000 (20:40 +1200)]
lib/oe/patch: commit with a dummy user/email when PATCHTOOL=git
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
Paul Eggleton [Mon, 29 Aug 2016 07:27:59 +0000 (19:27 +1200)]
oe-selftest: devtool: fix test after recent change
OE-Core commit d3057cba0b01484712fcee3c52373c143608a436 fixed handling
of wildcard bbappends, which means that this test's expectations about
the bbappend file name are no longer met. devtool finish is meant to use
wildcard bbappends so fix the test accordingly.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc-scripts: add RDEPENDS on libsotruss package required by sotruss script
It solves below error observed on qemux86 target:
root@qemux86:~# sotruss ./hello
ERROR: ld.so: object '/usr/$LIB/audit/sotruss-lib.so' cannot be loaded as audit
interface: cannot open shared object file; ignored.
Hello World
root@qemux86:~#
With this change, we get:
root@qemux86:~# sotruss ./hello
hello -> libc.so.6 :*__libc_start_main(0x8048300, 0x1,
0xbfc86274)
hello -> libc.so.6 :*puts(0x804851c, 0xb74af000, 0x0)
Hello World
root@qemux86:~#
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mikko Ylinen [Tue, 30 Aug 2016 05:38:45 +0000 (08:38 +0300)]
image_types: check COMPRESS_DEPENDS for backwards compatibility
To complete the transition/renaming to chained image type CONVERSION
while maintaining bacwards compatibility to COMPRESS(ION), make sure also
COMPRESS_DEPENDS is checked. Without this, the dependencies for legacy
COMPRESSIONTYPES do not get built.
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init-install: Fixes the install script failing when not finding any mmcblk devices
The init-install.sh and init-install-efi.sh scripts perform a check
to see which devices are available on a booted system for installation.
Recently, the way we check for these devices changed on 993bfb,
greping for devices found on /sys/block/, this change caused the installer
to fail (at least) when not finding any mmcblk devices, due to the fact
that we call sh -e to execute this script, so any command (grep)
or pipeline exiting with a non-zero status causes the whole script to exit
This patch throws in a harmless true exit status at the end of the pipeline(s)
of the grep commands to avoid the installer script from exiting, fixing the issue.
[YOCTO #10189]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 24 Aug 2016 21:50:57 +0000 (22:50 +0100)]
linux-firmware: set a preferred provider for brcmfmac-sdio.bin
This recipe packages six alternatives to brcmfmac-sdio.bin but as they all have
equal priority there is no determinism on what provider will be used if they are
all installed.
Arbitrarily select 4339 to be the highest priority.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Chen Qi [Fri, 19 Aug 2016 02:24:11 +0000 (10:24 +0800)]
systemd: split systemd-container
Split container/vm related units into a new package, systemd-container.
The split mainly references Fedora 24, with a few differences.
Apart from the bash and zsh completion files, the differences include
adding systemd-spawn@.service into the systemd-container package.
[YOCTO #9835]
Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Stephano Cetola [Wed, 17 Aug 2016 23:25:33 +0000 (16:25 -0700)]
rootfs.py: allow removal of unneeded packages
Current functionality allows for the removal of certain packages
based on the read-only image feature. This patch extends this
functionality by adding the FORCE_RO_REMOVE variable, which will
remove these packages regardless of any image features.
[ YOCTO #9491 ]
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Fri, 19 Aug 2016 12:21:06 +0000 (15:21 +0300)]
build-perf-test-wrapper.sh: make archive dir configurable
Add new command line argument '-a' that can be used to define the
directory where results (tarballs) are archived. Giving an empty string
disables archiving which makes sense if you store results in Git.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Fri, 19 Aug 2016 10:48:58 +0000 (13:48 +0300)]
build-perf-test-wrapper.sh: parse args with getopts
Use getopts for parsing the command line. This changes the usage so that
if a commit (to-be-tested) is defined it must be given by using '-c',
instead of a positional argument.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Tue, 23 Aug 2016 13:41:53 +0000 (16:41 +0300)]
oe-build-perf-test: new {tag_num} keyword for --commit-results-tag
This makes it possible to create numbered tags, where the "basename" of
the tag is the same and the only difference is an (automatically)
increasing index number. This is useful if you do multiple test runs on
the same commit. For example, using:
--commit-results-tag {tester_host}/{git_commit}/{tag_num}
Markus Lehtonen [Tue, 16 Aug 2016 12:56:56 +0000 (15:56 +0300)]
oe-build-perf-test: tag results committed to Git
Create a Git tag when committing results to a Git repository. This patch
also implements --commit-results-tag command line option for controlling
the tag name. The value
is a format string where the following fields may be used:
- {git_branch} - target branch being tested
- {git_commit} - target commit being tested
- {tester_host} - hostname of the tester machine
Tagging can be disabled by giving an empty string to
--commit-results-tag. The option has no effect if --commit-results is
not defined.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Mon, 15 Aug 2016 10:38:43 +0000 (13:38 +0300)]
oe-build-perf-test: pre-check Git repo when using --commit-results
Do a pre-check on the path that is specified with --commit-results
before running any tests. The script will create and/or initialize a
fresh Git repository if the given directory does not exist or if it is
an empty directory. It fails if it finds a non-empty directory that is
not a Git repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
A new command line option for defining the branch where results are
commited. The value is actually a format string accepting two field
names:
- {git_branch} expands to the name of the target branch being tested
- {tester_host} expands to the hostname of the tester machine
The option has no effect if --commit-results is not used.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Fri, 12 Aug 2016 10:53:48 +0000 (13:53 +0300)]
oe-build-perf-test: support committing results data to Git
Implement a new command line option '--commit-results' which commits the
test results data into a Git repository. The given path must be an
existing initialized local Git repository.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Tue, 23 Aug 2016 13:11:21 +0000 (16:11 +0300)]
oeqa.buildperf: use term commit instead of revision
This is basically a internal change, at this point. Term 'commit' better
represents the data we actually have. Term 'revision' is more vague and
could be understood to point to a tag object, for example.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Markus Lehtonen [Mon, 15 Aug 2016 10:56:58 +0000 (13:56 +0300)]
oeqa.utils.git.GitRepo: new arg to require topdir
Add a new 'is_topdir' argument to the GitRepo init method which
validates that the given path is the top directory of a Git repository.
Without this argument GitRepo also accepts subdirectories of a Git
repository (in which case GitRepo will point to the parent directory
that is the top directory of this repository) which may have undesired
in some cases.
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
Fabio Berton [Tue, 23 Aug 2016 21:23:59 +0000 (18:23 -0300)]
python-3.5-manifest: Add argparse module
Adding argparse module from Python's standard library. This allow use
argparse without installing all python-misc modules. For compatibility,
add python3-argparse as RDEPENDS to python3-misc.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Ross Burton <ross.burton@intel.com>
Ulf Magnusson [Tue, 23 Aug 2016 21:02:08 +0000 (23:02 +0200)]
useradd.bblass: Simplify target overrides
The current style might be a leftover from when _class-target did not
exist.
Also change the assignment to SSTATECLEANFUNCS to an append, which makes
more sense. useradd.bbclass is the only user of SSTATECLEANFUNCS as of
writing, so it won't make any functional difference.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com>
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
