Richard Mudgett [Thu, 16 Feb 2012 19:26:16 +0000 (19:26 +0000)]
Fix compile problem when old version of libvorbisfile v1.1.2 is used.
The principle difference between libvorbisfile v1.1.2 and newer (at least
v1.2.0) is the addition of the predefined callbacks OV_CALLBACKS_xxx in
vorbis/vorbisfile.h used for ov_open_callbacks().
* Updated the configure script to detect if libvorbisfile.h declares
OV_CALLBACKS_NOCLOSE.
* Copied the declaration of OV_CALLBACKS_NOCLOSE from v1.2.0 to allow
v1.1.2 to compile.
(closes issue ASTERISK-19370)
Reported by: Jonn Taylor
Sean Bright [Wed, 15 Feb 2012 17:24:22 +0000 (17:24 +0000)]
Use TRUNK_CALL_START as originally intended.
Back in r646, TRUNK_CALL_START was added and defined as 0x4000. That same value
was also hard-coded in one part of the IAX2 code instead of using the #define.
TRUNK_CALL_START has changed over the years (for dealing with LOW_MEMORY), but
the hard-coded usage was never updated to match. This patch fixes that.
Sean Bright [Tue, 14 Feb 2012 13:33:09 +0000 (13:33 +0000)]
Clear the high order bit from the destination call number before sending.
send_apathetic_reply takes the incoming frame's source call number as the
destination call number for the outgoing frame. If the incoming frame was a
full frame, then the high order bit of the source call number is set and will be
interpreted as a retransmit when sent back out as the destination call number.
Since the dir timestamp is available at one second resolution, we cannot
know if it was updated within the same second after we scanned it.
Therefore, we will force another scan if the dir was just modified.
* Changed to force another scan if the directory was just modified.
Richard Mudgett [Mon, 13 Feb 2012 17:22:17 +0000 (17:22 +0000)]
Fix reconnecting to pgsql database after connection loss.
There can only be one database connection in res_config_pgsql just like
res_config_sqlite. If the connection is lost, the connection may not get
reestablished to the same database if the res_pgsql.conf and
extconfig.conf files are inconsistent.
* Made only use the configured database from res_pgsql.conf.
* Fixed potential buffer overwrite of last[] in config_pgsql().
(closes issue ASTERISK-16982)
Reported by: german aracil boned
Terry Wilson [Thu, 9 Feb 2012 22:01:35 +0000 (22:01 +0000)]
Note that CDRs are immutable once a bridge is torn down
CDRs cannot be modified after a bridge is torn down, (e.g. after
Dial() returns) even though the CDR() function may be called. Since
modifying the CDR code to change this behavior could very easily
break all kinds of things, this patch just documents this limitation.
Kinsey Moore [Thu, 9 Feb 2012 20:49:59 +0000 (20:49 +0000)]
Fix parsing of SIP headers where compact and non-compact headers are mixed
Change parsing of SIP headers so that compactness of the header no longer
influences which header will be chosen. Previously, a non-compact header
would be chosen instead of a preceeding compact-form header.
Kinsey Moore [Thu, 9 Feb 2012 19:52:25 +0000 (19:52 +0000)]
Make the config parser remove escaping backslashes
The config parser in Asterisk does not currently remove a backslash that is
used to escape a semicolon which would otherwise be interpreted as the start
of a comment.
The change here causes that backslash to be removed, but does not create a
real escape system in the config parser. The biggest complication with a real
escape system would be breaking existing configs everywhere (parsing \\ as \
and breaking on escaped non-semicolon characters) even though it would be the
"right" way to do things.
Mark Michelson [Thu, 9 Feb 2012 17:32:47 +0000 (17:32 +0000)]
Fix translation path choices.
This change makes it so computational cost is not taken into account
when deciding if a multistep path is better than a single-step path. This
means that the only time a multistep path will be chosen is if no single-step
path exists. This ensures a better quality translation even if it turns out
to be slightly slower.
(closes issue ASTERISK-16821)
reported by Andrew Lindh
Matthew Jordan [Thu, 9 Feb 2012 16:30:56 +0000 (16:30 +0000)]
Fix SIP INFO DTMF handling for non-numeric codes
In ASTERISK-18924, SIP INFO DTMF handlingw as changed to account for both
lowercase alphatbetic DTMF events, as well as uppercase alphabetic DTMF
events. When this occurred, the comparison of the character buffer containing
the event code was changed such that the buffer was first compared again '0'
and '9' to determine if it was numeric. Unfortunately, since the first
character in the buffer will typically be '1' in the case of non-numeric
event codes (10-16), this caused those codes to be converted to a DTMF event
of '1'. This patch fixes that, and cleans up handling of both
application/dtmf-relay and application/dtmf content types.
Review: https://reviewboard.asterisk.org/r/1722/
(closes issue ASTERISK-19290)
Reported by: Ira Emus
Tested by: mjordan
Russell Bryant [Thu, 9 Feb 2012 02:23:53 +0000 (02:23 +0000)]
Remove some unnecessary locking from ast_hangup().
This patch removes some unnecessary locking of the channels container in
ast_hangup(). The reason this came up is that this lock can very quickly block
the entire system. If any of the channel cleanup code decides to block, it
causes a problem for the whole system. For example, when audiohooks get
destroyed, if that blocks for a while waiting on the mixmonitor thread to exit
because it's busy blocking on some I/O, it causes a problem for many other
threads in the meantime.
Terry Wilson [Tue, 7 Feb 2012 20:53:02 +0000 (20:53 +0000)]
Fix multiple SIP realtime issues
1. Set lastms to 0 when clearing instead of ""
2. Don't set ipaddr or port to the string "(null)" when they are empty
3. Add missing required fields, set default for lastms to 0, and modify
the length of the ipaddr field to 45 in the Postgresql realtime.sql
file.
Jonathan Rose [Tue, 7 Feb 2012 15:04:38 +0000 (15:04 +0000)]
Fix column duplication bug in module reload for cdr_pgsql.
Prior to this patch, attempts to reload cdr_pgsql.so would cause the column list to keep
its current data and then add a second copy during the reload. This would cause attempts
to log the CDR to the database to fail. This patch also cleans up some unnecessary null
checks for ast_free and deals with a few potential locking problems.
(closes issue ASTERISK-19216)
Reported by: Jacek Konieczny
Review: https://reviewboard.asterisk.org/r/1711/
* Allow acceptance of command without the app-data value. There are many
applications that do no need any parameters so it is silly to require that
field for all commands.
* Fixed a couple ast_malloc/ast_free mismatches with ast_add_extension2()
calls.
Jonathan Rose [Fri, 3 Feb 2012 21:24:45 +0000 (21:24 +0000)]
Fixes deadlocks occuring in chan_agent due to r335976
Bad locking order was added to chan_agent to prevent segfaults from having no locking
in a patch by irroot. This patch addresses the bad locking order by releasing locks before
getting the right locking order to stop deadlocks from occuring when doing multiple
interactions with agents.
(closes issue ASTERISK-19285)
Reported by: Alex Villacis Lasso
Review: https://reviewboard.asterisk.org/r/1708/
Kinsey Moore [Thu, 2 Feb 2012 22:26:50 +0000 (22:26 +0000)]
Ensure entering T.38 passthrough does not cause an infinite loop
After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
Jonathan Rose [Thu, 2 Feb 2012 18:31:37 +0000 (18:31 +0000)]
Backports some documentation for func_curl from 10 to 1.8
For some reason this function was completely undocumented in 1.8. I copied the
10 docs over to 1.8 and removed references to an enumerator that was added in
the Asterisk 10 version of func_curl. That was the only change I noted.
Mark Michelson [Thu, 2 Feb 2012 16:58:44 +0000 (16:58 +0000)]
Fix TLS port binding behavior as well as reload behavior:
* Removes references to tlsbindport from http.conf.sample and manager.conf.sample
* Properly bind to port specified in tlsbindaddr, using the default port if specified.
* On a reload, properly close socket if the service has been disabled.
A note has been added to UPGRADE.txt to indicate how ports must be set for TLS.
(closes issue ASTERISK-16959)
reported by Olaf Holthausen
(closes issue ASTERISK-19201)
reported by Chris Mylonas
(closes issue ASTERISK-19204)
reported by Chris Mylonas
Jonathan Rose [Thu, 2 Feb 2012 16:57:36 +0000 (16:57 +0000)]
Fix sip show peers port output, align columns, and fix ami port output.
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
Jonathan Rose [Wed, 1 Feb 2012 21:05:26 +0000 (21:05 +0000)]
Use ast_sockaddr_stringify_fmt wrappers for various functions in chan_sip
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
Sean Bright [Wed, 1 Feb 2012 15:50:50 +0000 (15:50 +0000)]
Resolve an overlap in the ast_audiohook_flags values.
AST_AUDIOHOOK_TRIGGER_WRITE and AST_AUDIOHOOK_WANTS_DTMF were overlapping which
may have caused unintended side effects. This patch moves
AST_AUDIOHOOK_TRIGGER_WRITE, and updates AST_AUDIOHOOK_TRIGGER_MODE to reflect
the original intention.
This will affect existing modules that use these flags, so be sure to recompile
as necessary.
Matthew Jordan [Wed, 1 Feb 2012 15:02:42 +0000 (15:02 +0000)]
Added clarification for the VERBOSITY setting to etc_default_asterisk
Clarified that using the VERBOSITY setting in etc_default_asterisk is the
same as using the -v command line switch, which causes Asterisk to launch
in console mode.
Terry Wilson [Tue, 31 Jan 2012 23:41:39 +0000 (23:41 +0000)]
Allow res_calendar to be unloaded
The calendaring tech modules depend on res_calendar and initially
res_calendar just bumped the use count so that it couldn't be unloaded.
res_calendar can potentially create many threads and I've seen issues
where the Asterisk shutdown has failed where it looked like these
threads could be the culprit.
This patch adds unload support for res_calendar. Unloading res_calendar
will also unload the dependant tech modules as well.
Richard Mudgett [Tue, 31 Jan 2012 16:51:06 +0000 (16:51 +0000)]
Fix memory leak in error paths for action_originate().
* Fix memory leak of vars in error paths for action_originate().
* Moved struct fast_originate_helper tech and data members to stringfields.
* Simplified ActionID header handling for fast_originate().
* Added doxygen note to ast_request() and ast_call() and the associated
channel callbacks that the data/addr parameters should be treated as const
char *.
Terry Wilson [Mon, 30 Jan 2012 23:17:16 +0000 (23:17 +0000)]
Re-link peers by IP when dnsmgr changes the IP
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
Alec L Davis [Mon, 30 Jan 2012 21:57:49 +0000 (21:57 +0000)]
RFC3261 Section 8.1.1.5. The sequence number value MUST be expressible as a 32-bit unsigned integer
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
Kevin P. Fleming [Mon, 30 Jan 2012 12:42:16 +0000 (12:42 +0000)]
Clarify log WARNING message when port-zero SDP 'm' lines received.
Previously, if an m-line in an SDP offer or answer had a port number of zero,
that line was skipped, and resulted in an 'Unsupported SDP media type...'
warning message. This was misleading, as the media type was not unsupported,
but was ignored because the m-line indicated that the media stream had been
rejected (in an answer) or was not going to be used (in an offer).
Russell Bryant [Sun, 29 Jan 2012 02:42:59 +0000 (02:42 +0000)]
Find even more network interfaces.
The previous change made the code look for emN and pciN in addition to what
it did originally, which was search for ethN. However, it needed to be looking
for pciN#N, so that's what it does now.
This also moves the memset() to be before every ioctl().
Kevin P. Fleming [Sat, 28 Jan 2012 14:49:48 +0000 (14:49 +0000)]
Add 'L16-256' MIME subtype alias for slin16.
Asterisk has supported the 'L16' MIME subtype for 16kHz signed linear (PCM)
audio for quite some time, but some endpoints refer to it as 'L16-256'. This
commit adds this as an alias for the existing format.
Russell Bryant [Sat, 28 Jan 2012 04:25:25 +0000 (04:25 +0000)]
Update ast_set_default_eid() to find more network interfaces.
As of Fedora 15, ethN is not the name of ethernet interfaces. The names
are emN or pciN. Update some code that searched for interfaces named
ethN to look for the new names, as well. For more information about why
this change was made, see this page:
Jonathan Rose [Fri, 27 Jan 2012 19:12:34 +0000 (19:12 +0000)]
Make failed PauseMonitor and UnpauseMonitor with no valid channel not close AMI session.
I also went ahead and took a little time to make sure that the manager value
AMI_SUCCESS was used instead of just return 0 being thrown around everywhere since that's
how we handle this stuff these days.
Alec L Davis [Fri, 27 Jan 2012 00:05:30 +0000 (00:05 +0000)]
rfc4235 - Section 4.1: Versions MUST be representable using a non-negative 32 bit integer.
If a BLF subscription exists for long enough, using %d may print negative version numbers.
Unlikely, as 2^32 at 1 update per second is ~137 years, or half that before the versions number started going negative.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
Jonathan Rose [Thu, 26 Jan 2012 19:06:05 +0000 (19:06 +0000)]
Copy amaflags to sip_pvt from peer during create_addr_from_peer
For whatever reason, we don't have a single function for copying data like this
from SIP peers to the SIP pvt. This patch adds the copying of amaflags to the
sip_pvt, but it would probably be worth discussing this function along with
the others that essentially just copy some amount of data from a peer to a
private.
(Closes issue ASTERISK-19029)
Reported by: Matt Lehner
Kevin P. Fleming [Wed, 25 Jan 2012 21:16:54 +0000 (21:16 +0000)]
Avoid unnecessary rebuilds of main/test.c.
main/test.c includes "asterisk/version.h", when it should include
"asterisk/ast_version.h" instead (and it should use the ast_get_version()
and ast_get_version_num() functions). This commit modifies it to extract
the Asterisk version information using the proper APIs, and as a result means
that main/test.c no longer needs to be rebuilt when a Subversion checkout
is updated or modified.
Jonathan Rose [Wed, 25 Jan 2012 16:39:15 +0000 (16:39 +0000)]
Redocuments sip types peer, user, friend in sip.conf.sample
There was faulty information in the sample config describing user as a synonym for friend
so it has been changed to better elaborate on the differences between the three entity
types.
Jonathan Rose [Tue, 24 Jan 2012 20:33:02 +0000 (20:33 +0000)]
Set core sounds version to 1.4.22.
Now that we have the right license for the Russian 1.4.22 sounds as well as the sounds
for the Australian English 1.4.22 sounds, we can finally set the sounds to use 1.4.22!
(closes issue ASTERISK-18978)
Reported by: Cameron Twomey
Patches:
confbridge.tar.001 uploaded by Cameron Twomey
confbridge.tar.002 uploaded by Cameron Twomey
While the FAXOPT function could be used to set the modem capabilities, the
input to that function was not being applied correctly to the spandsp layer.
This patch applies the current model capabilities before starting the spandsp
layer.
(closes issue: ASTERISK-16409)
Reported by: Kristijan Vrban
Tested by: Matt Jordan, Matthew Nicholson
Patches:
spandsp-modems-1.8.diff uploaded by mnicholson (license 5081)
spandsp-modems-10.diff uploaded by mnicholson (license 5081)
Mark Michelson [Sat, 21 Jan 2012 00:04:13 +0000 (00:04 +0000)]
Fix RTP reference leak.
If a blind transfer were initiated using a REFER without a prior
reINVITE to place the call on hold, AND if Asterisk were sending
RTCP reports, then there was a reference for the RTP instance
of the transferer.
This fixes the issue by merging two similar but slightly conflicting
sections of code into a single area. It also adds a stop_media_flows()
call in the case that the transferer's UA never sends a BYE to us
like it is supposed to.
Richard Mudgett [Thu, 19 Jan 2012 23:17:31 +0000 (23:17 +0000)]
Misc minor fixes in reqresp_parser.c and chan_sip.c.
* Fix corner cases in get_calleridname() parsing and ensure that the
output buffer is nul terminated.
* Make get_calleridname() truncate the name it parses if the given buffer
is too small rather than abandoning the parse and not returning anything
for the name. Adjusted get_calleridname_test() unit test to handle the
truncation change.
* Fix get_in_brackets_test() unit test to check the results of
get_in_brackets() correctly.
* Fix parse_name_andor_addr() to not return the address of a local buffer.
This function is currently not used.
* Fix potential NULL pointer dereference in sip_sendtext().
* No need to memset(calleridname) in check_user_full() or tmp_name in
get_name_and_number() because get_calleridname() ensures that it is nul
terminated.
* Reply with an accurate response if get_msg_text() fails in
receive_message(). This is academic in v1.8 because get_msg_text() can
never fail.
Kinsey Moore [Thu, 19 Jan 2012 22:36:02 +0000 (22:36 +0000)]
Correct output of RTCP jitter statistics in SR and RR reports
Change the RTCP RR and SR generation code to convert Asterisk's internal jitter
statistics to be represented in RTP timestamp units based on the rate of the
codec in use instead of in seconds.
Jonathan Rose [Thu, 19 Jan 2012 21:46:31 +0000 (21:46 +0000)]
Eliminates doubling the :port part of SIP Notify Message-Account headers.
This patch prevents the domain string from getting mangled during the initreqprep
step by moving the initialization to before its immediate use. It also documents
this pitfall for the ast_sockaddr_stringify functions.
Matthew Jordan [Wed, 18 Jan 2012 20:54:37 +0000 (20:54 +0000)]
Include iLBC source code for distribution with Asterisk
This patch includes the iLBC source code for distribution with Asterisk.
Clarification regarding the iLBC source code was provided by Google, and
the appropriate licenses have been included in the codecs/ilbc folder.
Stefan Schmidt [Wed, 18 Jan 2012 14:57:30 +0000 (14:57 +0000)]
The get_pai function in chan_sip.c didn't recognized a proper callerid name and
number from a P-Asserted-Identity cause the header parsing logic was wrong.
Changing the parsing functions to the sip header parsing APIs in
reqresp_parser.h solves this problem.
Review: https://reviewboard.asterisk.org/r/1673
Reviewed by: wdoekes2 and Mark Michelson
Jonathan Rose [Tue, 17 Jan 2012 16:55:41 +0000 (16:55 +0000)]
Adds pjmedia probation concepts to res_rtp_asterisk's learning mode.
In order to better handle RTP sources with strictrtp enabled (which is now default in 10)
using the learning mode to figure out new sources when they change is handled by checking
for a number of consecutive (by sequence number) packets received to an rtp struct
based on a new configurable value called 'probation'. Also, during learning mode instead
of liberally accepting all packets received, we now reject packets until a clear source
has been determined.
Mark Michelson [Tue, 17 Jan 2012 16:41:23 +0000 (16:41 +0000)]
Use built-in parsing functions for Contact and Record-Route headers.
If a Contact or a Record-Route header had a quoted string with an
item in angle brackets, then we would mis-parse it. For instance,
"Bob <1234>" <1234@example.org>
would be misparsed as having the URI "1234"
The fix for this is to use parsing functions from reqresp_parser.h
since they are heavily tested and are awesome.
Matthew Jordan [Tue, 17 Jan 2012 16:06:42 +0000 (16:06 +0000)]
Fix udptl issue with initial INVITE introduced by r351027
When an inital INVITE occurs that contains image media, a channel
is not yet associated with the SIP dialog. The file descriptor
associated with the udptl session needs to be set in
initialize_udptl or in sip_new to account for this scenario.
Russell Bryant [Tue, 17 Jan 2012 01:37:03 +0000 (01:37 +0000)]
Add some missing locking in chan_sip.
This patch adds some missing locking to the function
send_provisional_keepalive_full(). This function is called from the scheduler,
which is processed in the SIP monitor thread. The associated channel (or pbx)
thread will also be using the same sip_pvt and ast_channel so locking must be
used. The sip_pvt_lock_full() function is used to ensure proper locking order
in a safe manner.
In passing, document a suspected reference counting error in this function.
The "fix" is left commented out because when the "fix" is present, crashes
occur. My theory is that fixing it is exposing a reference counting error
elsewhere, but I don't know where. (Or my analysis of this being a problem
could have been completely wrong in the first place). Leave the comment in
the code for so that someone may investigate it again in the future.
Also add a bit of doxygen to transmit_provisional_response().
Terry Wilson [Mon, 16 Jan 2012 21:12:53 +0000 (21:12 +0000)]
Ensure ACK retransmit & hangup on non-200 response to INVITE
When handling a non-2xx final response on an INVITE transaction, we have to
keep the transaction around after we send an ACK in case we receive a
retransmission of the response so we can re-transmit the ACK, but also tear
down the ast_channel as soon as we transmit the ACK. Before this patch, we
could fail at both of these things. Calling sip_alreadygone/needdestroy
prevented us from keeping the transaction up and retransmitting the ACK, and
queueing CONGESTION was not sufficient to cause the channel to be torn down
when originating calls via the CLI, for example.
This patch queues a hangup with CONGESTION instead of just queueing CONGESTION
for these responses and removes the sip_alreadygone and sip_needdestroy calls
from handle_response_invite on non-2xx responses. It relies on the hangup
calling sip_scheddestroy.
For more information, see section 17.1.1.1 of RFC 3261.
Terry Wilson [Mon, 16 Jan 2012 20:06:45 +0000 (20:06 +0000)]
Don't prematurely stop SIP session timer
When Asterisk is the UAS (incoming call, endpoint is re-inviting) the SIP session timer expires after half the time the sip endpoint indicates in the Session-expires header in proc_session_timer(). The session timer was being stopped totally and being handled as an error case instead of running again until the second expiry. This patch treats the half-time expiry as a non-error case and continues the timer until the true expiry.
(closes issue ASTERISK-18996)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches: session_timer_fix.diff by Terry Wilson (License #5357)
based on session_timer.patch by Thomas Arimont (License #5525)
Matthew Jordan [Mon, 16 Jan 2012 19:09:45 +0000 (19:09 +0000)]
Create and initialize udptl only when dialog negotiates for image media
Prior to this patch, the udptl struct was allocated and initialized when a
dialog was associated with a peer that supported T.38, when a new SIP
channel was allocated, or what an INVITE request was received. This resulted
in any dialog associated with a peer that supported T.38 having udptl support
assigned to it, including the UDP ports needed for communication. This
occurred even in non-INVITE dialogs that would never send image media.
This patch creates and initializes the udptl structure only when the SDP
for a dialog specifies that image media is supported, or when Asterisk
indicates through the appropriate control frame that a dialog is to support
T.38.
(closes issue ASTERISK-16698)
Reported by: under
Tested by: Stefan Schmidt
Patches: udptl_20120113.diff uploaded by mjordan (License #6283)
Walter Doekes [Sun, 15 Jan 2012 20:07:13 +0000 (20:07 +0000)]
Allow only one thread at a time to do asterisk cleanup/shutdown.
Add locking around the really-really-quit part of the core stop/restart
part. Previously more than one thread could be called to do cleanup,
causing atexit handlers to be run multiple times, in turn causing
segfaults.
(issue ASTERISK-18883)
Reviewed by: Terry Wilson
Review: https://reviewboard.asterisk.org/r/1662/
Review: https://reviewboard.asterisk.org/r/1658/
Kevin P. Fleming [Sat, 14 Jan 2012 16:40:17 +0000 (16:40 +0000)]
Ensure that all AC_LANG_PROGRAM calls in the configure script are properly quoted.
Recent versions of autoconf (2.68 on my system) won't properly process the configure
script unless every call to AC_LANG_PROGRAM is m4-quoted. Many calls in the script
were, but many were not. This patch corrects the unquoted calls.
Kinsey Moore [Fri, 13 Jan 2012 21:40:32 +0000 (21:40 +0000)]
Make sure asterisk builds on OpenBSD
OpenBSD defines SO_PEERCRED, but it returns a 'struct sockpeercred', not
'struct ucred', which causes compilation of main/asterisk.c to fail in
read_credentials(). This allows configure to check for sockpeercred and
asterisk to deal with it properly.
(closes issue ASTERISK-18929) Reported-by: Barry Miller Patch-by: Barry Miller
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@350730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
projects / thirdparty / asterisk.git / log
