In ASTERISK-17842, some additional library checks were added to the configure
script so that the bfd library could be found on CentOS and Fedora systems.
As it turns out, openSUSE requires an additional library. This patch adds
another check to the configure script for openSUSE that will add that library.
res_rtp_asterisk: Correct erroneous lost packet information in RTCP reports
RTCP's calculation of the number of lost packets in an RTP stream is based on
that stream's sequence number count, the number of received packets, and how
many packets we expect to receive. When the SSRC for an RTP stream changes,
there can - and almost always will be - a large jump in the next packet's
timestamp and sequence number. If we don't reset the number of received
packets, sequence number count, and other metrics used by RTCP, the next RR/SR
report will use the previous SSRC's values to calculate the lost packet count
for the new SSRC - resulting in a very large number of lost packets.
This patch modifies res_rtp_asterisk such that, if it detects a SSRC change, it
will reset the various values used by the RTCP calculations. From the
perspective of RTCP, this appears as a new media stream - which is what it is.
Review: https://reviewboard.asterisk.org/r/2886/
(closes issue AST-1174)
Reported by: Thomas Arimont
........
Merged revisions 400089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r401446 | mjordan | 2013-10-22 17:42:24 -0500 (Tue, 22 Oct 2013) | 15 lines
res_rtp_asterisk: Fix crash when RTCP is not available during SSRC change
In r400089, a patch was put in to correct erroneous RTCP statistic resets.
Unfortunately, ast_rtp_read can be called on an RTP instance that does not
have RTCP information. This patch prevents that crash by only resetting
the statistics if we do actually have an RTCP instance.
(issue AST-1174)
(closes issue ASTERISK-22667)
Reported by: John Bigelow
........
Merged revisions 401445 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r401960 | sgriepentrog | 2013-10-25 15:44:40 -0500 (Fri, 25 Oct 2013) | 15 lines
pbx.c: fix confused match caller id that deleted exten still in hash
This fixes a bug where a zero length callerid match adjacent to a no
match callerid extension entry would be deleted together, which then
resulted in hashtable references to free'd memory. A third state of
the matchcid value has been added to indicate match to any extension
which allows enforcing comparison of matchcid on/off without errors.
Richard Mudgett [Wed, 18 Sep 2013 23:36:12 +0000 (23:36 +0000)]
UDPTL: Backport some fixes from v12 that should be in v11.
Backported the following as applied to udptl.c:
* -r398020 Fixup udpdl defaults if config file not present.
* -r398533 Fixup improper use of ao2_global_obj_replace().
Kinsey Moore [Wed, 18 Sep 2013 19:55:46 +0000 (19:55 +0000)]
Fix jitter buffer log file creation
This adjusts '/'-to-'#' replacement to replace all instances of '/'
instead of just the first to ensure that the jitter buffer log file
gets the correct name as per Richard Kenner's suggestion.
(closes issue ASTERISK-21036)
Reported by: Richard Kenner
........
Merged revisions 399402 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Wed, 18 Sep 2013 17:17:13 +0000 (17:17 +0000)]
Add a WARNING in bridge_softmix when a timing module isn't loaded
If bridge_softmix fails to be created because no timing source is present in
Asterisk, this will currently fail gracefully but with (most likely) a generic
error message by whatever module tried to create the softmix bridge. This
patch adds a more explicit warning so you can actually diagnose and fix the
problem.
Michael L. Young [Wed, 18 Sep 2013 01:34:09 +0000 (01:34 +0000)]
Fix Segfault When Syntax Of A Line Under [applicationmap] Is Invalid
When processing the lines under the [applicationmap] context in features.conf, a
segfault occurs from attempting to process a line with an invalid syntax
(basically missing most of the arguments).
Example:
[applicationmap]
automon=*6
* This patch moves the checking for empty arguments to before they are accessed.
* Also, checked the "todo" comment and removed it. Some applications do not
require arguments.
(closes issue ASTERISK-22416)
Reported by: CGI.NET
Tested by: CGI.NET
Patches:
asterisk-22416-check-syntax-first_v2.diff by Michael L. Young (license 5026)
Kevin Harwell [Tue, 17 Sep 2013 18:32:57 +0000 (18:32 +0000)]
Remote console: more output discrepancies
The remote console continued to have issues with its output. In this case CLI
command output would either not show up (if verbose level = 0) or would contain
verbose prefixes (if verbose level > 0) once log messages were sent to the
remote console. The fix now now adds verbose prefix data to all new lines
contained in a verbose log string.
Kevin Harwell [Tue, 17 Sep 2013 14:24:02 +0000 (14:24 +0000)]
Confbridge: empty conference not being torn down
Confbridge would not properly tear down an empty conference bridge when all
users were kicked via end_marked=yes and at least one user was also set to
wait_marked. This occurred because while end_marked users were being kicked
and at least one was also set to wait_marked then the leave wait_marked handler
would be called on that user, but there would be no waiting user (still
considered active). The waiting users would decrement and now be negative. The
conference would remain, but be put into an inactive state. The solution was
to move from the active list to the wait list, those users with wait_marked set
right before kicking. This allows both the active and wait users to decrement
correctly and the confbridge to tear down properly.
A crashed also occurred when trying to list the specific conference from the CLI.
This happened because the conference specified was invalid. Since the
conference properly tears down now there is no way to reference it thus
alleviating the crash as well.
(closes issue ASTERISK-21859)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2848/
Richard Mudgett [Mon, 16 Sep 2013 16:42:35 +0000 (16:42 +0000)]
chan_iax2: Fix saving the wrong expiry time in astdb.
When a new IAX2 client registers, the astdb database is updated with the
value of minregexpire defined in iax.conf instead of using the expiry time
that is provided by the client. The provided expiry time of the client is
updated after inserting the astdb entry. As a consequence, restarting or
reloading asterisk creates clients whose registration may expire before
they reregister. The clients are therefore unavailable after minregexpire
seconds until they reregister.
* Move updating of the expiry time to before inserting into the astdb.
(closes issue ASTERISK-22504)
Reported by: Stefan Wachtler
Patches:
chan_iax2.c.patch (license #6533) patch uploaded by Stefan Wachtler
........
Merged revisions 399158 from http://svn.asterisk.org/svn/asterisk/branches/1.8
David M. Lee [Fri, 13 Sep 2013 20:49:33 +0000 (20:49 +0000)]
Don't write to /tmp/refs when REF_DEBUG is not defined.
If MALLOC_DEBUG is enabled, then the debug destructor for the container
is used, which would erroneously write to /tmp/refs. This patch only
uses the debug destructor if ref_debug is used.
(closes issue ASTERISK-22536)
........
Merged revisions 399098 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Kinsey Moore [Fri, 13 Sep 2013 13:48:34 +0000 (13:48 +0000)]
Fix several crashes in MeetMeAdmin
This change ensures that MeetMeAdmin commands requiring a user actually
get a user and fixes another issue where an extra dereference could
occur for a last-entered user being ejected if a user identifier was
also provided.
(closes issue ASTERISK-21907)
Reported by: Alex Epshteyn
Review: https://reviewboard.asterisk.org/r/2844/
........
Merged revisions 399033 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Rusty Newton [Thu, 12 Sep 2013 00:02:37 +0000 (00:02 +0000)]
'queue add member' help text correction
You are adding dial strings to the queue, not channels. An aribitrary string
could be used, but you are typically referencing a channel. Correcting the
command help text.
(issue ASTERISK-22263)
(closes issue ASTERISK-22263)
Reported By: Rusty Newton
........
Merged revisions 398884 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Jonathan Rose [Wed, 11 Sep 2013 19:46:39 +0000 (19:46 +0000)]
chan_sip: Reject calls without prior SDP on 200 OK
If we receive a 200 OK without SDP, we will now check to see if
the remote address has been established for that channel's RTP
session and if the to tag for that channel has changed from
the most recent to tag in a response less than 200.
If either a change has been made since the last to-tag was
received or the remote address is unset, then we will drop
the call.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/diff/#index_header
........
Merged revisions 398835 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Richard Mudgett [Mon, 9 Sep 2013 23:21:46 +0000 (23:21 +0000)]
MALLOC_DEBUG: Change fence magic number to be completely different from the freed magic number.
Race conditions between freeing a nul terminated string and
ast_strdup()'ing it are more likely to be detected if the fence and freed
magic numbers are completely different.
........
Merged revisions 398703 from http://svn.asterisk.org/svn/asterisk/branches/1.8
David M. Lee [Mon, 9 Sep 2013 20:02:32 +0000 (20:02 +0000)]
Fix DEBUG_THREADS when lock is acquired in __constructor__
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
Kinsey Moore [Sat, 7 Sep 2013 00:59:41 +0000 (00:59 +0000)]
Prevent XMPP timeout on blank responses
Sometimes the Google Voice servers have a bad habit of sending out 1
byte replies to the xmpp resource. When a blank 1 byte reply is
received from the socket the buffer attempts to wait (endlessly) for
the rest of the reply from google which effectively blocks the socket
and google voice calls will no longer come into the server.
This patch allows the xmpp module to correctly detect empty packets and
send out ping replies to google. It also sets a socket timeout on the
default socket which prevents the xmpp socket from closing and
preventing future google voice calls from coming into the server.
Furthermore instead of sending an empty reply back to google we send a
proper xmpp ping reply back. This also adds several more
socket messages.
(closes issue ASTERISK-22347)
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/2771
Patches:
xmpp_fix_1.diff uploaded by Andrew Nagy (License #6524)
Kinsey Moore [Fri, 6 Sep 2013 19:28:16 +0000 (19:28 +0000)]
Fix Jabber/XMPP distributed MWI
The mailbox and context are swapped on the receiving end for all users
of Jabber and XMPP distributed MWI in Asterisk 1.8 and all more recent
versions. This swaps those values to be correct when publishing to the
internal event system from Jabber/XMPP distributed MWI state.
(closes issue ASTERISK-22435)
Reported by: abelbeck
Tested by: Michael Keuter
Patches:
asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by abelbeck
asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch uploaded by abelbeck
........
Merged revisions 398523 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Richard Mudgett [Thu, 5 Sep 2013 17:29:24 +0000 (17:29 +0000)]
chan_iax2: Fix stray reference to worker thread idle_list.
* Fix stray reference to idle_list in cleanup_thread_list(). This may be
the reason for the note in iax2_process_thread() about threads not being
removed from the task lists.
* Move cleanup_thread_list(&idle_list) to after the other lists are
cleaned up.
........
Merged revisions 398416 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Richard Mudgett [Thu, 5 Sep 2013 17:10:28 +0000 (17:10 +0000)]
chan_iax2: Fix bridgecallno deadlock avoidance.
* Fix bridgecallno deadlock avoidance. When doing deadlock avoidance, you
need to retest the status of values for each loop to see if you still need
the lock for bridgecallno.
* As a safety check, after acquiring the bridgecallno lock you should
check if iaxs[bridgecallno] is NULL just like the current callno checks.
* Move setting thread->iostate to IAX_IOSTATE_IDLE to after processing any
deferred frames to ensure that the iostate is IDLE when it is placed back
into the idle list. defer_full_frame() tries to ensure
iax2_process_thread() wakes up to process the frame.
........
Merged revisions 398379 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Richard Mudgett [Wed, 4 Sep 2013 15:57:03 +0000 (15:57 +0000)]
chan_misdn: Fix misdn debug output printed with arbitrary verbose levels.
Fix the misdn debug output to remote consoles. chan_misdn uses
ast_console_puts() which doesn't know about verbose levels. Better to use
ast_verbose() instead. Without this patch the misdn debug messages are
appended to the verbose level which ever was set by the message sent to
the console before, i.e. any undefined level.
Kevin Harwell [Fri, 30 Aug 2013 17:00:26 +0000 (17:00 +0000)]
Fix memory leak
Fixed a features.c test that leaked a reference to a parked call. This caused
chancount to never reach 0, so graceful shutdown stops. Also added an
unregister test.
Richard Mudgett [Fri, 30 Aug 2013 16:57:00 +0000 (16:57 +0000)]
test_substituition: Fix failed test reporting to actually report failure.
You cannot put the "Testing <blah> pass/fail" on a single line before
actually performing the test. Now any additional failure information is
logged before the test pass/fail announcement.
* Added an additional CDR(answer,u) test.
........
Merged revisions 398018 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Kevin Harwell [Thu, 29 Aug 2013 22:16:41 +0000 (22:16 +0000)]
Verbose logging discrepancies
Refactored cases where a combination of ast_verbose/options_verbose were
present. Also in general tried to eliminate, in as many places as possible,
where the options_verbose global variable was being used. Refactored the way
local and remote consoles handle verbose message logging in an attempt to
solve the various discrepancies that sometimes would show between the two.
Matthew Jordan [Tue, 27 Aug 2013 18:03:08 +0000 (18:03 +0000)]
AST-2013-005: Fix crash caused by invalid SDP
If the SIP channel driver processes an invalid SDP that defines media
descriptions before connection information, it may attempt to reference
the socket address information even though that information has not yet
been set. This will cause a crash.
This patch adds checks when handling the various media descriptions that
ensures the media descriptions are handled only if we have connection
information suitable for that media.
Thanks to Walter Doekes, OSSO B.V., for reporting, testing, and providing
the solution to this problem.
Matthew Jordan [Tue, 27 Aug 2013 15:55:16 +0000 (15:55 +0000)]
AST-2013-004: Fix crash when handling ACK on dialog that has no channel
A remote exploitable crash vulnerability exists in the SIP channel driver if an
ACK with SDP is received after the channel has been terminated. The handling
code incorrectly assumed that the channel would always be present.
This patch adds a check such that the SDP will only be parsed and applied if
Asterisk has a channel present that is associated with the dialog.
Note that the patch being applied was modified only slightly from the patch
provided by Walter Doekes of OSSO B.V.
(closes issue ASTERISK-21064)
Reported by: Colin Cuthbertson
Tested by: wdoekes, Colin Cutherbertson
patches:
issueA21064_fix.patch uploaded by wdoekes (License 5674)
........
Merged revisions 397710 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 397711 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Fri, 23 Aug 2013 16:07:18 +0000 (16:07 +0000)]
Fix memory corruption when trying to get "core show locks".
Review https://reviewboard.asterisk.org/r/2580/ tried to fix the mismatch
in memory pools but had a math error determining the buffer size and
didn't address other similar memory pool mismatches.
* Effectively reverted the previous patch to go in the same direction as
trunk for the returned memory pool of ast_bt_get_symbols().
* Fixed memory leak in ast_bt_get_symbols() when BETTER_BACKTRACES is
defined.
* Fixed some formatting in ast_bt_get_symbols().
* Fixed sig_pri.c freeing memory allocated by libpri when MALLOC_DEBUG is
enabled.
* Fixed __dump_backtrace() freeing memory from ast_bt_get_symbols() when
MALLOC_DEBUG is enabled.
* Moved __dump_backtrace() because of compile issues with the utils
directory.
(closes issue ASTERISK-22221)
Reported by: Matt Jordan
Walter Doekes [Thu, 22 Aug 2013 08:22:39 +0000 (08:22 +0000)]
Add _IO_stdin_used in version-script to fix SIGBUSes on Sparc.
The --version-script,asterisk.exports linker flag (and the module
exports) didn't provide _IO_stdin_used in the list of exported symbols.
That causes some kind of libc compatibility mode to kick in, where
stdio file structures (stdout/stderr) land somewhere else. In the
case of the Sparc, they landed on misaligned memory.
This became apparent first after r376428 (Reorder startup sequence)
when a lot of ast_log's were replaced with fprintf's. Writing to
stderr triggered a SIGBUS. (Compared to x86 and amd64 architectures,
the Sparc is very picky about memory alignment.)
(issue ASTERISK-21763)
(issue ASTERISK-21665)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2760/
........
Merged revisions 397377 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Jonathan Rose [Wed, 21 Aug 2013 23:02:35 +0000 (23:02 +0000)]
UDPTL: Fix a regression where UDPTL won't load default settings
If the file udptl.conf is unavailable at startup, UDPTL will fail to
initialize and while it makes some noise, it isn't immediately
obvious why consumers start to fail when using it. This patch makes
UDPTL load as though an empty config was provided when udptl is
unavailable at startup.
(closes issue ASTERISK-22349)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2773/
Matthew Jordan [Wed, 21 Aug 2013 15:12:57 +0000 (15:12 +0000)]
Set 14400 as the default max bit rate if T38MaxBitRate is not specified
If an endpoint fails to include the T38MaxBitRate attribute during negotiation,
Asterisk will negotiate a bit rate of 2400 instead of the ITU recommended
bit rate of 14400. This patch fixes this by making AST_T38_RATE_14400 the
'default' value of the enum by assigning it a value of 0, such that if an
endpoint fails to include the attribute, the default will be 14400.
Note that Walter Doekes included the nice comment in frame.h about why we are
purposefully assigning AST_T38_RATE_14400 a value of 0.
(closes issue ASTERISK-22275)
Reported by: Andreas Steinmetz
patches:
fax-fix.patch uploaded by anstein (License 6523)
........
Merged revisions 397256 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Mark Michelson [Wed, 21 Aug 2013 14:36:39 +0000 (14:36 +0000)]
Prevent a crash on outbound SIP MESSAGE requests.
If a From header on an outbound out-of-call SIP MESSAGE were
malformed, the result could crash Asterisk.
In addition, if a From header on an incoming out-of-call SIP
MESSAGE request were malformed, the message was happily accepted
rather than being rejected up front. The incoming message path
would not result in a crash, but the behavior was bad nonetheless.
(closes issue ASTERISK-22185)
reported by Zhang Lei
Michael L. Young [Wed, 21 Aug 2013 02:11:26 +0000 (02:11 +0000)]
Fix Not Storing Current Incoming Recv Address
In 1.8, r384779 introduced a regression by retrieving an old dialog and keeping
the old recv address since recv was already set. This has caused a problem when
a proxy is involved since responses to incoming requests from the proxy server,
after an outbound call is established, are never sent to the correct recv
address.
In 11, r382322 introduced this regression.
The fix is to revert that change and always store the recv address on incoming
requests.
Thank you Walter Doekes for helping to point out this error and Mark Michelson
for your input/review of the fix.
(closes issue ASTERISK-22071)
Reported by: Alex Zarubin
Tested by: Alex Zarubin, Karsten Wemheuer
Patches:
asterisk-22071-store-recvd-address.diff by Michael L. Young (license 5026)
........
Merged revisions 397204 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Tue, 20 Aug 2013 01:18:34 +0000 (01:18 +0000)]
Fix invalid access to disposed memory in main/data unit test
It is not safe to iterate over a macro'd list of ao2 objects, deref them such
that the item's destructor is called, and leave them in the list. The list
macro to iterate over items requires the item to be a valid allocated object
in order to proceed to the next item; with MALLOC_DEBUG on the corruption of
the linked list is caught in the crash.
This patch fixes the invalid access to free'd memory by removing the ao2 item
from the list before de-refing it.
Note that this is a backport of r396915 from Asterisk trunk.
........
Merged revisions 396958 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Tue, 20 Aug 2013 00:06:37 +0000 (00:06 +0000)]
Let Queue wrap up time influence member availability
Queue members who happen to be in multiple queues at the same time may not
have any wrap up time. This problem occurred due to a code change in Asterisk
11.3.0 that unified device state tracking of Queue members in multiple
Queues (which fixed some other problems, but unfortunately caused this one).
This patch fixes the behavior by having the is_member_available function
check the queue's wrap up time and the time of the member's last call, such
that for a particular queue, the member won't be considered available if their
last call is within the wrap up time.
(closes issue ASTERISK-22189)
Reported by: Tony Lewis
Tested by: Tony Lewis
Matthew Jordan [Mon, 19 Aug 2013 23:53:55 +0000 (23:53 +0000)]
Resolve conflicts between CONFFLAG_DONT_DENOISE and CONFFLAG_INTROUSER_VMREC
When r382230 added an option to not denoise the MeetMe conference (if a user
had a channel whose format's sample rate changed frequently, for example),
the value added was the maximum allowed value for the constants that define
the options for MeetMe in 1.8. Not so in 11 - unfortunately, the option
CONFFLAG_DONT_DENOISE conflicts with CONFFLAG_INTROUESR_VMREC. This patch
fixes that, and also tweaks one of the way in which the constants was
declared for consistency.
Thanks to Tony Mountifield for pointing out the problem and solution.
(closes issue ASTERISK-22269)
Reported by: Tony Mountifield
Kinsey Moore [Thu, 15 Aug 2013 16:29:56 +0000 (16:29 +0000)]
Remove leading spaces from the CLI command before parsing
If you've mistakenly put a space before typing in a command, the
leading space will be included as part of the command, and the command
parser will not find the corresponding command. This patch rectifies
that situation by stripping the leading spaces on commands.
Joshua Colp [Wed, 14 Aug 2013 18:08:27 +0000 (18:08 +0000)]
Tweak test_hashtab_thrash test to allow the critical threads to execute.
Depending on certain conditions it was possible for the hashtab counting thread
to starve other threads, preventing them from executing in the expected fashion.
This change adds a sleep to allow the others to do what they need to do. While
this doesn't thrash the hashtab as much as previously, it at least works.
(closes issue ASTERISK-22276)
Reported by: Matt Jordan
........
Merged revisions 396619 from http://svn.asterisk.org/svn/asterisk/branches/1.8
- Fix different issues with call transfer cancel. In case 3rd party busy or congestion call was not returned.
- Fix displaying soft button 'Redial' in case of no redial number exists
Fix Registration Failure When A Peer And TLS Are Used
If a peer is used in a register line and TLS is defined as the transport, the
registration fails since the transport on the dialog is never set properly
resulting in UDP being used instead of TLS.
This patch sets the dialog's transport based on the transport that was defined
in the register line. If the register line does not specify a transport, the
parsing function for the register line always defaults back to UDP.
(closes issue ASTERISK-21964)
Reported by: Doug Bailey
Tested by: Doug Bailey
Patches:
asterisk-21964-set-reg-dialog-transport.diff
by Michael L. Young (license 5026)
........
Merged revisions 396240 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Restore Extra Line Break Between Peers When Running AMI Action SIPPeers
The commit (r387133) for fixing ASTERISK-21466 accidentally removed an extra
line break between the peers returned by the AMI action SIPPeers. This
results in some parsers breaking because they expect this extra line break.
This patch restores that extra line break.
(closes issue ASTERISK-22239)
Reported by: Jacek Konieczny
Tested by: Jacek Konieczny, Michael L. Young
Patches:
asterisk-ami_sippeers_separator.patch by Jacek Konieczny (license 6298)
Adding a note to UPGRADE.txt about a change made to res_agi in order to
indicate when streaming an audio file fails like it is done in other parts
of the code to indicate an error.
Note was requested by Paul Belanger:
http://lists.digium.com/pipermail/asterisk-dev/2013-July/061420.html
(related to issue ASTERISK-21903)
........
Merged revisions 396196 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Sun, 21 Jul 2013 22:51:58 +0000 (22:51 +0000)]
Add an upgrade note for libuuid dependency; remove note in CHANGES
This patch notes that libuuid is now a dependency for res_rtp_asterisk; this
was introduced in between 11.4.0 and 11.5.0 to resolve a dependency for
pjproject, which res_rtp_asterisk uses for ICE/STUN/TURN support.
It also removes a conflicting note from CHANGES. While support for playing
prompts to the first participant was added for app_queue, it was disabled
by default and an option added to enable it. That was properly noted in the
UPGRADE.txt file.
Matthew Jordan [Sun, 21 Jul 2013 18:16:36 +0000 (18:16 +0000)]
Provide proper ring tone in indications.conf for Malaysia
The ring tone provided in the sample indications.conf was incorrect. This patch
modifies the sample ring tone to be what it should:
ring = 425/400,0/200,425/400,0/2000
This brings it in line with the tone definition in DAHDI 2.7.0. (zonedata.c)
(closes issue ASTERISK-21997)
Reported by: Filip Jenicek
patches:
malaysia_ring.patch uploaded by phill (License 6277)
........
Merged revisions 394940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Sun, 21 Jul 2013 03:09:59 +0000 (03:09 +0000)]
Tolerate presence of RFC2965 Cookie2 header by ignoring it
This patch modifies parsing of cookies in Asterisk's http server by doing an
explicit comparison of the "Cookie" header instead of looking at the first
6 characters to determine if the header is a cookie header. This avoids
parsing "Cookie2" headers and overwriting the previously parsed "Cookie"
header.
Note that we probably should be appending the cookies in each "Cookie"
header to the parsed results; however, while clients can send multiple
cookie headers they never really do. While this patch doesn't improve
Asterisk's behavior in that regard, it shouldn't make it any worse either.
Note that the solution in this patch was pointed out on the issue by the
issue reporter, Stuart Henderson.
(closes issue ASTERISK-21789)
Reported by: Stuart Henderson
Tested by: mjordan, Stuart Henderson
........
Merged revisions 394899 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Sun, 21 Jul 2013 02:38:43 +0000 (02:38 +0000)]
Update PostgreSQL realtime scripts with schema for queue_log table
This patch updates the realtime SQL scripts with an entry that will create the
queue_log table. This brings the PostgreSQL scripts inline with the MySQL
scripts, with respect to what tables they will create.
Michael L. Young [Thu, 18 Jul 2013 12:52:33 +0000 (12:52 +0000)]
Properly indicate failure to open an audio stream in res_agi
If there is an error streaming an audio file, the current return status makes it
difficult for an AGI script to determine that there was an error with the audio
file.
This patches changes the result to return -1 and the function returns
RESULT_FAILURE instead of RESULT_SUCCESS. From looking at other parts of
res_agi, this would appear to be the proper way to handle an error.
(closes issue ASTERISK-21903)
Reported by: Ariel Wainer
Tested by: Ariel Wainer
Patches:
asterisk-21903-return-stream-res_1.8.diff
by Michael L. Young (license 5026)
Matthew Jordan [Sun, 14 Jul 2013 02:34:43 +0000 (02:34 +0000)]
Provide error message for QUEUE_MEMBER when member is not in queue
When QUEUE_MEMBER is used and the member specified is not in the queue,
Asterisk provides an ERROR message that indicates that the option specified
is not valid. This patch now properly displays an ERROR message that the
member is not in the queue if an interface is specified.
(closes issue ASTERISK-21980)
Reported by: Avraam David
Matthew Jordan [Sun, 14 Jul 2013 01:59:19 +0000 (01:59 +0000)]
Clarify documentation for function PASSTHRU
It is not apparent to the average user that the PASSTHRU function should not
be passed as ${PASSTHRU(string)} but just as PASSTHRU(string) to functions
which take a variable name and not its contents.
This patch clarifies the behavior in the documentation and provides an example.
(closes issue ASTERISK-21717)
Reported by: Richard Miller
patches:
func_strings.diff uploaded by Richard Miller (license 5685)
........
Merged revisions 394302 from http://svn.asterisk.org/svn/asterisk/branches/1.8
projects / thirdparty / asterisk.git / log
