NFSD_MAY_LOCK means a few different things.
- it means that GSS is not required.
- it means that with NFSEXP_NOAUTHNLM, authentication is not required
- it means that OWNER_OVERRIDE is allowed.
None of these are specific to locking, they are specific to the NLM
protocol.
So:
- rename to NFSD_MAY_NLM
- set NFSD_MAY_OWNER_OVERRIDE and NFSD_MAY_BYPASS_GSS in nlm_fopen()
so that NFSD_MAY_NLM doesn't need to imply these.
- move the test on NFSEXP_NOAUTHNLM out of nfsd_permission() and
into fh_verify where other special-case tests on the MAY flags
happen. nfsd_permission() can be called from other places than
fh_verify(), but none of these will have NFSD_MAY_NLM.
Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NFSv4 LOCK operations should not avoid the set of authorization
checks that apply to all other NFSv4 operations. Also, the
"no_auth_nlm" export option should apply only to NLM LOCK requests.
It's not necessary or sensible to apply it to NFSv4 LOCK operations.
Instead, set no permission bits when calling fh_verify(). Subsequent
stateid processing handles authorization checks.
Reported-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT do not bypass
only GSS, but bypass any method. This is a problem specially for NFS3
AUTH_NULL-only exports.
The purpose of NFSD_MAY_BYPASS_GSS_ON_ROOT is described in RFC 2623,
section 2.3.2, to allow mounting NFS2/3 GSS-only export without
authentication. So few procedures which do not expose security risk used
during mount time can be called also with AUTH_NONE or AUTH_SYS, to allow
client mount operation to finish successfully.
The problem with current implementation is that for AUTH_NULL-only exports,
the NFSD_MAY_BYPASS_GSS_ON_ROOT is active also for NFS3 AUTH_UNIX mount
attempts which confuse NFS3 clients, and make them think that AUTH_UNIX is
enabled and is working. Linux NFS3 client never switches from AUTH_UNIX to
AUTH_NONE on active mount, which makes the mount inaccessible.
Fix the NFSD_MAY_BYPASS_GSS and NFSD_MAY_BYPASS_GSS_ON_ROOT implementation
and really allow to bypass only exports which have enabled some real
authentication (GSS, TLS, or any other).
The result would be: For AUTH_NULL-only export if client attempts to do
mount with AUTH_UNIX flavor then it will receive access errors, which
instruct client that AUTH_UNIX flavor is not usable and will either try
other auth flavor (AUTH_NULL if enabled) or fails mount procedure.
Similarly if client attempt to do mount with AUTH_NULL flavor and only
AUTH_UNIX flavor is enabled then the client will receive access error.
This should fix problems with AUTH_NULL-only or AUTH_UNIX-only exports if
client attempts to mount it with other auth flavor (e.g. with AUTH_NULL for
AUTH_UNIX-only export, or with AUTH_UNIX for AUTH_NULL-only export).
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: 898374fdd7f0 ("nfsd: unregister with rpcbind when deleting a transport") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
The above traces are from a Google-VMM based VM, but the same behavior
happens with a QEMU based VM that is modified to add a SystemMemory range
for the TPM TIS address space.
The only reason this doesn't cause problems for HPET, which appears to
require a SystemMemory region, is because HPET gets special treatment via
x86_init.timers.timer_init(), and so gets a chance to create its UC-
mapping before acpi_init() clobbers things. Disabling the early call to
hpet_time_init() yields the same behavior for HPET:
[ 0.318264] ioremap error for 0xfed00000-0xfed01000, requested 0x2, got 0x0
Hack around the ACPI gap by forcing the legacy PCI hole to UC when
overriding the (virtual) MTRRs for CoCo guest, so that ioremap handling
of MTRRs naturally kicks in and forces the ACPI mappings to be UC.
Note, the requested/mapped memtype doesn't actually matter in terms of
accessing the device. In practically every setup, legacy PCI devices are
emulated by the hypervisor, and accesses are intercepted and handled as
emulated MMIO, i.e. never access physical memory and thus don't have an
effective memtype.
Even in a theoretical setup where such devices are passed through by the
host, i.e. point at real MMIO memory, it is KVM's (as the hypervisor)
responsibility to force the memory to be WC/UC, e.g. via EPT memtype
under TDX or real hardware MTRRs under SNP. Not doing so cannot work,
and the hypervisor is highly motivated to do the right thing as letting
the guest access hardware MMIO with WB would likely result in a variety
of fatal #MCs.
In other words, forcing the range to be UC is all about coercing the
kernel's tracking into thinking that it has established UC mappings, so
that the ioremap code doesn't reject mappings from e.g. the TPM driver and
thus prevent the driver from loading and the device from functioning.
Note #2, relying on guest firmware to handle this scenario, e.g. by setting
virtual MTRRs and then consuming them in Linux, is not a viable option, as
the virtual MTRR state is managed by the untrusted hypervisor, and because
OVMF at least has stopped programming virtual MTRRs when running as a TDX
guest.
Link: https://lore.kernel.org/all/8137d98e-8825-415b-9282-1d2a115bb51a@linux.intel.com Fixes: 8e690b817e38 ("x86/kvm: Override default caching mode for SEV-SNP and TDX") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Jürgen Groß <jgross@suse.com> Cc: Korakit Seemakhupt <korakit@google.com> Cc: Jianxiong Gao <jxgao@google.com> Cc: Nikolay Borisov <nik.borisov@suse.com> Suggested-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Tested-by: Korakit Seemakhupt <korakit@google.com> Link: https://lore.kernel.org/r/20250828005249.39339-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit d77e59a8fccd "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 68d54ceeec0e ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page") Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com> Cc: stable@vger.kernel.org # 5.10.x Cc: Will Deacon <will@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Lance Yang <lance.yang@linux.dev> Acked-by: Lance Yang <lance.yang@linux.dev> Reviewed-by: David Hildenbrand <david@redhat.com> Tested-by: Lance Yang <lance.yang@linux.dev> Signed-off-by: Will Deacon <will@kernel.org>
[ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a755d0e2d41b ("cpufreq: Honour transition_latency over
transition_delay_us") caused platforms where cpuinfo.transition_latency
is CPUFREQ_ETERNAL to get a very large transition latency whereas
previously it had been capped at 10 ms (and later at 2 ms).
This led to a user-observable regression between 6.6 and 6.12 as
described by Shawn:
"The dbs sampling_rate was 10000 us on 6.6 and suddently becomes 6442450 us (4294967295 / 1000 * 1.5) on 6.12 for these platforms
because the default transition delay was dropped [...].
It slows down dbs governor's reacting to CPU loading change
dramatically. Also, as transition_delay_us is used by schedutil
governor as rate_limit_us, it shows a negative impact on device
idle power consumption, because the device gets slightly less time
in the lowest OPP."
Evidently, the expectation of the drivers using CPUFREQ_ETERNAL as
cpuinfo.transition_latency was that it would be capped by the core,
but they may as well return a default transition latency value instead
of CPUFREQ_ETERNAL and the core need not do anything with it.
Accordingly, introduce CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS and make
all of the drivers in question use it instead of CPUFREQ_ETERNAL. Also
update the related Rust binding.
Fixes: a755d0e2d41b ("cpufreq: Honour transition_latency over transition_delay_us") Closes: https://lore.kernel.org/linux-pm/20250922125929.453444-1-shawnguo2@yeah.net/ Reported-by: Shawn Guo <shawnguo@kernel.org> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 6.6+ <stable@vger.kernel.org> # 6.6+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://patch.msgid.link/2264949.irdbgypaU6@rafael.j.wysocki
[ rjw: Fix typo in new symbol name, drop redundant type cast from Rust binding ] Tested-by: Shawn Guo <shawnguo@kernel.org> # with cpufreq-dt driver Reviewed-by: Qais Yousef <qyousef@layalina.io> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ omitted Rust changes ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
With my local branch to enable bs > ps support for btrfs, sometimes I
hit the following ASSERT() inside submit_one_sector():
ASSERT(block_start != EXTENT_MAP_HOLE);
Please note that it's not yet possible to hit this ASSERT() in the wild
yet, as it requires btrfs bs > ps support, which is not even in the
development branch.
But on the other hand, there is also a very low chance to hit above
ASSERT() with bs < ps cases, so this is an existing bug affect not only
the incoming bs > ps support but also the existing bs < ps support.
[CAUSE]
Firstly that ASSERT() means we're trying to submit a dirty block but
without a real extent map nor ordered extent map backing it.
Furthermore with extra debugging, the folio triggering such ASSERT() is
always larger than the fs block size in my bs > ps case.
(8K block size, 4K page size)
After some more debugging, the ASSERT() is trigger by the following
sequence:
extent_writepage()
| We got a 32K folio (4 fs blocks) at file offset 0, and the fs block
| size is 8K, page size is 4K.
| And there is another 8K folio at file offset 32K, which is also
| dirty.
| So the filemap layout looks like the following:
|
| "||" is the filio boundary in the filemap.
| "//| is the dirty range.
|
| 0 8K 16K 24K 32K 40K
| |////////| |//////////////////////||////////|
|
|- writepage_delalloc()
| |- find_lock_delalloc_range() for [0, 8K)
| | Now range [0, 8K) is properly locked.
| |
| |- find_lock_delalloc_range() for [16K, 40K)
| | |- btrfs_find_delalloc_range() returned range [16K, 40K)
| | |- lock_delalloc_folios() locked folio 0 successfully
| | |
| | | The filemap range [32K, 40K) got dropped from filemap.
| | |
| | |- lock_delalloc_folios() failed with -EAGAIN on folio 32K
| | | As the folio at 32K is dropped.
| | |
| | |- loops = 1;
| | |- max_bytes = PAGE_SIZE;
| | |- goto again;
| | | This will re-do the lookup for dirty delalloc ranges.
| | |
| | |- btrfs_find_delalloc_range() called with @max_bytes == 4K
| | | This is smaller than block size, so
| | | btrfs_find_delalloc_range() is unable to return any range.
| | \- return false;
| |
| \- Now only range [0, 8K) has an OE for it, but for dirty range
| [16K, 32K) it's dirty without an OE.
| This breaks the assumption that writepage_delalloc() will find
| and lock all dirty ranges inside the folio.
|
|- extent_writepage_io()
|- submit_one_sector() for [0, 8K)
| Succeeded
|
|- submit_one_sector() for [16K, 24K)
Triggering the ASSERT(), as there is no OE, and the original
extent map is a hole.
Please note that, this also exposed the same problem for bs < ps
support. E.g. with 64K page size and 4K block size.
If we failed to lock a folio, and falls back into the "loops = 1;"
branch, we will re-do the search using 64K as max_bytes.
Which may fail again to lock the next folio, and exit early without
handling all dirty blocks inside the folio.
[FIX]
Instead of using the fixed size PAGE_SIZE as @max_bytes, use
@sectorsize, so that we are ensured to find and lock any remaining
blocks inside the folio.
And since we're here, add an extra ASSERT() to
before calling btrfs_find_delalloc_range() to make sure the @max_bytes is
at least no smaller than a block to avoid false negative.
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fdba ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC") Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hansg@kernel.org> Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The max_register = 128 setting in the regmap config is not valid.
The Intel Dollar Cove TI PMIC has an eeprom unlock register at address 0x88
and a number of EEPROM registers at 0xF?. Increase max_register to 0xff so
that these registers can be accessed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20241208150028.325349-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 64e0d839c589 ("mfd: intel_soc_pmic_chtdc_ti: Set use_single_read regmap_config flag") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the sampling rates going in (host) and out (dai) from the DSP
are different, the IPC4 delay reporting does not work correctly.
Add support for this case by scaling the all raw position values to
a common timebase before calculating real-time delay for the PCM.
Cc: stable@vger.kernel.org Fixes: 0ea06680dfcb ("ASoC: SOF: ipc4-pcm: Correct the delay calculation") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://patch.msgid.link/20251002074719.2084-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All streams (currently) which is configured to use ChainDMA can only work
on Link/host DMA pairs where the link side position can be access via host
registers (like HDA on CAVS 2.5 platforms).
Since the firmware does not provide time_info for ChainDMA, unlike for HDA
stream, the kernel should calculate the start and end offsets that is
needed for the delay calculation.
With this small change we can report accurate delays when the stream is
configured to use ChainDMA.
The fields dma_chan_tx and dma_chan_rx of the struct pci_epf_test can be
NULL even after EPF initialization. Then it is prudent to check that
they have non-NULL values before releasing the channels. Add the checks
in pci_epf_test_clean_dma_chan().
Without the checks, NULL pointer dereferences happen and they can lead
to a kernel panic in some cases:
Remove a surplus return statement from the void function that has been
added in the commit commit 8353813c88ef ("PCI: endpoint: Enable DMA
tests for endpoints with DMA capabilities").
Especially, as an empty return statements at the end of a void functions
serve little purpose.
This fixes the following checkpatch.pl script warning:
WARNING: void function return statements are not generally useful
#296: FILE: drivers/pci/endpoint/functions/pci-epf-test.c:296:
+ return;
+}
Link: https://lore.kernel.org/r/tencent_F250BEE2A65745A524E2EFE70CF615CA8F06@qq.com Signed-off-by: Wang Jiang <jiangwang@kylinos.cn>
[kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Stable-dep-of: 85afa9ea122d ("PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "mm/ksm: Fix incorrect accounting of KSM counters during
fork", v3.
The first patch in this series fixes the incorrect accounting of KSM
counters such as ksm_merging_pages, ksm_rmap_items, and the global
ksm_zero_pages during fork.
The following patch add a selftest to verify the ksm_merging_pages counter
was updated correctly during fork.
Test Results
============
Without the first patch
-----------------------
# [RUN] test_fork_ksm_merging_page_count
not ok 10 ksm_merging_page in child: 32
With the first patch
--------------------
# [RUN] test_fork_ksm_merging_page_count
ok 10 ksm_merging_pages is not inherited after fork
This patch (of 2):
Currently, the KSM-related counters in `mm_struct`, such as
`ksm_merging_pages`, `ksm_rmap_items`, and `ksm_zero_pages`, are inherited
by the child process during fork. This results in inconsistent
accounting.
When a process uses KSM, identical pages are merged and an rmap item is
created for each merged page. The `ksm_merging_pages` and
`ksm_rmap_items` counters are updated accordingly. However, after a fork,
these counters are copied to the child while the corresponding rmap items
are not. As a result, when the child later triggers an unmerge, there are
no rmap items present in the child, so the counters remain stale, leading
to incorrect accounting.
A similar issue exists with `ksm_zero_pages`, which maintains both a
global counter and a per-process counter. During fork, the per-process
counter is inherited by the child, but the global counter is not
incremented. Since the child also references zero pages, the global
counter should be updated as well. Otherwise, during zero-page unmerge,
both the global and per-process counters are decremented, causing the
global counter to become inconsistent.
To fix this, ksm_merging_pages and ksm_rmap_items are reset to 0 during
fork, and the global ksm_zero_pages counter is updated with the
per-process ksm_zero_pages value inherited by the child. This ensures
that KSM statistics remain accurate and reflect the activity of each
process correctly.
Link: https://lkml.kernel.org/r/cover.1758648700.git.donettom@linux.ibm.com Link: https://lkml.kernel.org/r/7b9870eb67ccc0d79593940d9dbd4a0b39b5d396.1758648700.git.donettom@linux.ibm.com Fixes: 7609385337a4 ("ksm: count ksm merging pages for each process") Fixes: cb4df4cae4f2 ("ksm: count allocated ksm rmap_items for each process") Fixes: e2942062e01d ("ksm: count all zero pages placed by KSM") Signed-off-by: Donet Tom <donettom@linux.ibm.com> Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev> Acked-by: David Hildenbrand <david@redhat.com> Cc: Aboorva Devarajan <aboorvad@linux.ibm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Donet Tom <donettom@linux.ibm.com> Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: xu xin <xu.xin16@zte.com.cn> Cc: <stable@vger.kernel.org> [6.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ replaced mm_flags_test() calls with test_bit() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crash> struct trace_event_call ffffaf015340e528
struct trace_event_call {
...
perf_events = 0xffff0ad5fa89f088, //this value is correct, but x21 = 0
...
}
Race Condition Analysis:
The race occurs between kprobe activation and perf_events initialization:
CPU0 CPU1
==== ====
perf_kprobe_init
perf_trace_event_init
tp_event->perf_events = list;(1)
tp_event->class->reg (2)← KPROBE ACTIVE
Debug exception triggers
...
kprobe_dispatcher
kprobe_perf_func (tk->tp.flags & TP_FLAG_PROFILE)
head = this_cpu_ptr(call->perf_events)(3)
(perf_events is still NULL)
Problem:
1. CPU0 executes (1) assigning tp_event->perf_events = list
2. CPU0 executes (2) enabling kprobe functionality via class->reg()
3. CPU1 triggers and reaches kprobe_dispatcher
4. CPU1 checks TP_FLAG_PROFILE - condition passes (step 2 completed)
5. CPU1 calls kprobe_perf_func() and crashes at (3) because
call->perf_events is still NULL
CPU1 sees that kprobe functionality is enabled but does not see that
perf_events has been assigned.
Add pairing read and write memory barriers to guarantee that if CPU1
sees that kprobe functionality is enabled, it must also see that
perf_events has been assigned.
Patch series "Squashfs: performance improvement and a sanity check".
This patchset adds an additional sanity check when reading regular file
inodes, and adds support for SEEK_DATA/SEEK_HOLE lseek() whence values.
This patch (of 2):
Add an additional sanity check when reading regular file inodes.
A regular file if the file size is an exact multiple of the filesystem
block size cannot have a fragment. This is because by definition a
fragment block stores tailends which are not a whole block in size.
The device minor should not be cleared after the device is released.
Fixes: 9e14868dc952 ("media: mc: Clear minor number reservation at unregistration time") Cc: stable@vger.kernel.org Reported-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=031d0cfd7c362817963f Tested-by: syzbot+031d0cfd7c362817963f@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ moved clear_bit from media_devnode_release callback to media_devnode_unregister before put_device ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 6f110a5e4f99 ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
Introduce acpi_gbl_use_global_lock, which allows to skip the Global Lock
initialization. This is useful for systems without Global Lock (such as
loong_arch), so as to avoid error messages during boot phase:
ACPI Error: Could not enable global_lock event (20240827/evxfevnt-182)
ACPI Error: No response from Global Lock hardware, disabling lock (20240827/evglock-59)
Link: https://github.com/acpica/acpica/commit/463cb0fe Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During xattr block validation, check_xattrs() processes xattr entries
without validating that entries claiming to use EA inodes have non-zero
sizes. Corrupted filesystems may contain xattr entries where e_value_size
is zero but e_value_inum is non-zero, indicating invalid xattr data.
Add validation in check_xattrs() to detect this corruption pattern early
and return -EFSCORRUPTED, preventing invalid xattr entries from causing
issues throughout the ext4 codebase.
syzkaller found a path where ext4_xattr_inode_update_ref() reads an EA
inode refcount that is already <= 0 and then applies ref_change (often
-1). That lets the refcount underflow and we proceed with a bogus value,
triggering errors like:
EXT4-fs error: EA inode <n> ref underflow: ref_count=-1 ref_change=-1
EXT4-fs warning: ea_inode dec ref err=-117
Make the invariant explicit: if the current refcount is non-positive,
treat this as on-disk corruption, emit ext4_error_inode(), and fail the
operation with -EFSCORRUPTED instead of updating the refcount. Delete the
WARN_ONCE() as negative refcounts are now impossible; keep error reporting
in ext4_error_inode().
This prevents the underflow and the follow-on orphan/cleanup churn.
During the movement of a written extent, mext_page_mkuptodate() is
called to read data in the range [from, to) into the page cache and to
update the corresponding buffers. Therefore, we should not wait on any
buffer whose start offset is >= 'to'. Otherwise, it will return -EIO and
fail the extents movement.
$ for i in `seq 3 -1 0`; \
do xfs_io -fs -c "pwrite -b 1024 $((i * 1024)) 1024" /mnt/foo; \
done
$ umount /mnt && mount /dev/pmem1s /mnt # drop cache
$ e4defrag /mnt/foo
e4defrag 1.47.0 (5-Feb-2023)
ext4 defragmentation for /mnt/foo
[1/1]/mnt/foo: 0% [ NG ]
Success: [0/1]
Cc: stable@kernel.org Fixes: a40759fb16ae ("ext4: remove array of buffer_heads from mext_page_mkuptodate()") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz>
Message-ID: <20250912105841.1886799-1-yi.zhang@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring.
Cc: stable@vger.kernel.org Fixes: 8b67f04ab9de ("ext4: Add mount options in superblock") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0@mit.edu> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, our handling of metadata is _ambiguous_ in some scenarios,
that is, we end up returning unknown if the range only covers the
mapping partially.
This is because earlier in ext4_getfsmap_meta_helper, we end up ignoring
any extent that starts before our queried range, but overlaps it. While
the man page [1] is a bit ambiguous on this, this fix makes the output
make more sense since we are anyways returning an "unknown" extent. This
is also consistent to how XFS does it:
After running a stress test combined with fault injection,
we performed fsck -a followed by fsck -fn on the filesystem
image. During the second pass, fsck -fn reported:
Inode 131512, end of extent exceeds allowed value
(logical block 405, physical block 1180540, len 2)
This inode was not in the orphan list. Analysis revealed the
following call chain that leads to the inconsistency:
ext4_da_write_end()
//does not update i_disksize
ext4_punch_hole()
//truncate folio, keep size
ext4_page_mkwrite()
ext4_block_page_mkwrite()
ext4_block_write_begin()
ext4_get_block()
//insert written extent without update i_disksize
journal commit
echo 1 > /sys/block/xxx/device/delete
da-write path updates i_size but does not update i_disksize. Then
ext4_punch_hole truncates the da-folio yet still leaves i_disksize
unchanged(in the ext4_update_disksize_before_punch function, the
condition offset + len < size is met). Then ext4_page_mkwrite sees
ext4_nonda_switch return 1 and takes the nodioread_nolock path, the
folio about to be written has just been punched out, and it’s offset
sits beyond the current i_disksize. This may result in a written
extent being inserted, but again does not update i_disksize. If the
journal gets committed and then the block device is yanked, we might
run into this. It should be noted that replacing ext4_punch_hole with
ext4_zero_range in the call sequence may also trigger this issue, as
neither will update i_disksize under these circumstances.
To fix this, we can modify ext4_update_disksize_before_punch to
increase i_disksize to min(i_size, offset + len) when both i_size and
(offset + len) are greater than i_disksize.
Cc: stable@kernel.org Signed-off-by: Yongjian Sun <sunyongjian1@huawei.com> Reviewed-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Baokun Li <libaokun1@huawei.com>
Message-ID: <20250911133024.1841027-1-sunyongjian@huaweicloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files.
The implicit __GFP_NOFAIL flag in ext4_sb_bread() was removed in commit 8a83ac54940d ("ext4: call bdev_getblk() from sb_getblk_gfp()"), meaning
the function can now fail under memory pressure.
Most callers of ext4_sb_bread() propagate the error to userspace and do not
remount the filesystem read-only. However, ext4_free_branches() handles
ext4_sb_bread() failure by remounting the filesystem read-only.
This implies that an ext3 filesystem (mounted via the ext4 driver) could be
forcibly remounted read-only due to a transient page allocation failure,
which is unacceptable.
To mitigate this, introduce a new helper function, ext4_sb_bread_nofail(),
which explicitly uses __GFP_NOFAIL, and use it in ext4_free_branches().
Fixes: 8a83ac54940d ("ext4: call bdev_getblk() from sb_getblk_gfp()") Cc: stable@kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When v3 NLM request finds a conflicting delegation, it triggers
a delegation recall and nfsd_open fails with EAGAIN. nfsd_open
then translates EAGAIN into nfserr_jukebox. In nlm_fopen, instead
of returning nlm_failed for when there is a conflicting delegation,
drop this NLM request so that the client retries. Once delegation
is recalled and if a local lock is claimed, a retry would lead to
nfsd returning a nlm_lck_blocked error or a successful nlm lock.
Fixes: d343fce148a4 ("[PATCH] knfsd: Allow lockd to drop replies as appropriate") Cc: stable@vger.kernel.org # v6.6 Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5304877936c0 ("NFSD: Fix strncpy() fortify warning") replaced
strncpy(,, sizeof(..)) with strlcpy(,, sizeof(..) - 1), but strlcpy()
already guaranteed NUL-termination of the destination buffer and
subtracting one byte potentially truncated the source string.
The incorrect size was then carried over in commit 72f78ae00a8e ("NFSD:
move from strlcpy with unused retval to strscpy") when switching from
strlcpy() to strscpy().
Fix this off-by-one error by using the full size of the destination
buffer again.
damon_lru_sort_apply_parameters() allocates a new DAMON context, stages
user-specified DAMON parameters on it, and commits to running DAMON
context at once, using damon_commit_ctx(). The code is, however, directly
updating the monitoring attributes of the running context. And the
attributes are over-written by later damon_commit_ctx() call. This means
that the monitoring attributes parameters are not really working. Fix the
wrong use of the parameter context.
Link: https://lkml.kernel.org/r/20250916031549.115326-1-sj@kernel.org Fixes: a30969436428 ("mm/damon/lru_sort: use damon_commit_ctx()") Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: <stable@vger.kernel.org> [6.11+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem.
Optimize hugetlb_pages_alloc_boot() to return immediately when
max_huge_pages is 0, avoiding unnecessary CPU cycles and the below log
message when hugepages aren't configured in the kernel command line.
[ 3.702280] HugeTLB: allocation took 0ms with hugepage_allocation_threads=32
Link: https://lkml.kernel.org/r/20250814102333.4428-1-lirongqing@baidu.com Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Tested-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Jane Chu <jane.chu@oracle.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 524c48072e56 ("mm/page_alloc: rename ALLOC_HIGH to
ALLOC_MIN_RESERVE") is the start of a series that explains how __GFP_HIGH,
which implies ALLOC_MIN_RESERVE, is going to be used instead of
__GFP_ATOMIC for high atomic reserves.
Commit eb2e2b425c69 ("mm/page_alloc: explicitly record high-order atomic
allocations in alloc_flags") introduced ALLOC_HIGHATOMIC for such
allocations of order higher than 0. It still used __GFP_ATOMIC, though.
Then, commit 1ebbb21811b7 ("mm/page_alloc: explicitly define how
__GFP_HIGH non-blocking allocations accesses reserves") just turned that
check for !__GFP_DIRECT_RECLAIM, ignoring that high atomic reserves were
expected to test for __GFP_HIGH.
This leads to high atomic reserves being added for high-order GFP_NOWAIT
allocations and others that clear __GFP_DIRECT_RECLAIM, which is
unexpected. Later, those reserves lead to 0-order allocations going to
the slow path and starting reclaim.
From /proc/pagetypeinfo, without the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 1 8 10 9 7 3 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 64 20 12 5 0 0 0 0 0 0 0
With the patch:
Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0
Link: https://lkml.kernel.org/r/20250814172245.1259625-1-cascardo@igalia.com Fixes: 1ebbb21811b7 ("mm/page_alloc: explicitly define how __GFP_HIGH non-blocking allocations accesses reserves") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Tested-by: Helen Koike <koike@igalia.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Zi Yan <ziy@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When both THP and MTE are enabled, splitting a THP and replacing its
zero-filled subpages with the shared zeropage can cause MTE tag mismatch
faults in userspace.
Remapping zero-filled subpages to the shared zeropage is unsafe, as the
zeropage has a fixed tag of zero, which may not match the tag expected by
the userspace pointer.
KSM already avoids this problem by using memcmp_pages(), which on arm64
intentionally reports MTE-tagged pages as non-identical to prevent unsafe
merging.
As suggested by David[1], this patch adopts the same pattern, replacing the
memchr_inv() byte-level check with a call to pages_identical(). This
leverages existing architecture-specific logic to determine if a page is
truly identical to the shared zeropage.
Having both the THP shrinker and KSM rely on pages_identical() makes the
design more future-proof, IMO. Instead of handling quirks in generic code,
we just let the architecture decide what makes two pages identical.
Don't deinitialize and reinitialize the HAL helpers. The dma memory is
deallocated and there is high possibility that we'll not be able to get
the same memory allocated from dma when there is high memory pressure.
alloc_slab_obj_exts() should mark failed obj_exts vector allocations
independent on whether the vector is being allocated for a new or an
existing slab. Current implementation skips doing this for existing
slabs. Fix this by marking failed allocations unconditionally.
When object extension vector allocation fails, we set slab->obj_exts to
OBJEXTS_ALLOC_FAIL to indicate the failure. Later, once the vector is
successfully allocated, we will use this flag to mark codetag references
stored in that vector as empty to avoid codetag warnings.
slab_obj_exts() used to retrieve the slab->obj_exts vector pointer checks
slab->obj_exts for being either NULL or a pointer with MEMCG_DATA_OBJEXTS
bit set. However it does not handle the case when slab->obj_exts equals
OBJEXTS_ALLOC_FAIL. Add the missing condition to avoid extra warning.
If the decompressor is compiled with clang this can lead to the following
warning:
In file included from arch/s390/boot/startup.c:4:
...
In file included from ./include/linux/pgtable.h:6:
./arch/s390/include/asm/pgtable.h:2065:48: warning: passing 'unsigned long *' to parameter of type
'long *' converts between pointers to integer types with different sign [-Wpointer-sign]
2065 | value = __atomic64_or_barrier(PGSTE_PCL_BIT, ptr);
Add -Wno-pointer-sign to the decompressor compile flags, like it is also
done for the kernel. This is similar to what was done for x86 to address
the same problem [1].
[1] commit dca5203e3fe2 ("x86/boot: Add -Wno-pointer-sign to KBUILD_CFLAGS")
Currently, if CCW request creation fails with -EINVAL, the DASD driver
returns BLK_STS_IOERR to the block layer.
This can happen, for example, when a user-space application such as QEMU
passes a misaligned buffer, but the original cause of the error is
masked as a generic I/O error.
This patch changes the behavior so that -EINVAL is returned as
BLK_STS_INVAL, allowing user space to properly detect alignment issues
instead of interpreting them as I/O errors.
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Cc: stable@vger.kernel.org #6.11+ Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The block layer validates buffer alignment using the device's
dma_alignment value. If dma_alignment is smaller than
logical_block_size(bp_block) -1, misaligned buffer incorrectly pass
validation and propagate to the lower-level driver.
This patch adjusts dma_alignment to be at least logical_block_size -1,
ensuring that misalignment buffers are properly rejected at the block
layer and do not reach the DASD driver unnecessarily.
Fixes: 2a07bb64d801 ("s390/dasd: Remove DMA alignment") Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Cc: stable@vger.kernel.org #6.11+ Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Filter out the register forms of 0F 01 when determining whether or not to
emulate in response to a potential UMIP violation #GP, as SGDT and SIDT only
accept memory operands. The register variants of 0F 01 are used to encode
instructions for things like VMX and SGX, i.e. not checking the Mod field
would cause the kernel to incorrectly emulate on #GP, e.g. due to a CPL
violation on VMLAUNCH.
Fixes: 1e5db223696a ("x86/umip: Add emulation code for UMIP instructions") Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When checking for a potential UMIP violation on #GP, verify the decoder found
at least two opcode bytes to avoid false positives when the kernel encounters
an unknown instruction that starts with 0f. Because the array of opcode.bytes
is zero-initialized by insn_init(), peeking at bytes[1] will misinterpret
garbage as a potential SLDT or STR instruction, and can incorrectly trigger
emulation.
hits a #GP, the kernel emulates it as STR and squashes the #GP (and corrupts
the userspace code stream).
Arguably the check should look for exactly two bytes, but no three byte
opcodes use '0f 00 xx' or '0f 01 xx' as an escape, i.e. it should be
impossible to get a false positive if the first two opcode bytes match '0f 00'
or '0f 01'. Go with a more conservative check with respect to the existing
code to minimize the chances of breaking userspace, e.g. due to decoder
weirdness.
Analyzed by Nick Bray <ncbray@google.com>.
Fixes: 1e5db223696a ("x86/umip: Add emulation code for UMIP instructions") Reported-by: Dan Snyder <dansnyder@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FRED specification has been changed in v9.0 to state that there
is no need for FRED event handlers to begin with ENDBR64, because
in the presence of supervisor indirect branch tracking, FRED event
delivery does not enter the WAIT_FOR_ENDBRANCH state.
As a result, remove ENDBR64 from FRED entry points.
Then add ANNOTATE_NOENDBR to indicate that FRED entry points will
never be used for indirect calls to suppress an objtool warning.
This change implies that any indirect CALL/JMP to FRED entry points
causes #CP in the presence of supervisor indirect branch tracking.
Credit goes to Jennifer Miller <jmill@asu.edu> and other contributors
from Arizona State University whose research shows that placing ENDBR
at entry points has negative value thus led to this change.
Note: This is obviously an incompatible change to the FRED
architecture. But, it's OK because there no FRED systems out in the
wild today. All production hardware and late pre-production hardware
will follow the FRED v9 spec and be compatible with this approach.
[ dhansen: add note to changelog about incompatibility ]
The 'max_cs' stores the largest chip select number. It should only
be updated when the current 'cs' is greater than existing 'max_cs'. So,
fix the condition accordingly.
Also, return failure if there are no flash device declared.
Fixes: 0f3841a5e115 ("spi: cadence-qspi: report correct number of chip-select") CC: stable@vger.kernel.org Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-4-s-k6@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cqspi_read_setup() and cqspi_write_setup() program the address width as
the last step in the setup. This is likely to be immediately followed by
a DAC region read/write. On TI K3 SoCs the DAC region is on a different
endpoint from the register region. This means that the order of the two
operations is not guaranteed, and they might be reordered at the
interconnect level. It is possible that the DAC read/write goes through
before the address width update goes through. In this situation if the
previous command used a different address width the OSPI command is sent
with the wrong number of address bytes, resulting in an invalid command
and undefined behavior.
Read back the size register to make sure the write gets flushed before
accessing the DAC region.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") CC: stable@vger.kernel.org Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-3-s-k6@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cqspi_indirect_read_execute() and cqspi_indirect_write_execute() first
set the enable bit on APB region and then start reading/writing to the
AHB region. On TI K3 SoCs these regions lie on different endpoints. This
means that the order of the two operations is not guaranteed, and they
might be reordered at the interconnect level.
It is possible for the AHB write to be executed before the APB write to
enable the indirect controller, causing the transaction to be invalid
and the write erroring out. Read back the APB region write before
accessing the AHB region to make sure the write got flushed and the race
condition is eliminated.
Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") CC: stable@vger.kernel.org Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Message-ID: <20250905185958.3575037-2-s-k6@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tegra already defines all BARs except BAR0 as BAR_RESERVED. This is
sufficient for pci-epf-test to not allocate backing memory and to not call
set_bar() for those BARs. However, marking a BAR as BAR_RESERVED does not
mean that the BAR gets disabled.
The host side driver, pci_endpoint_test, simply does an ioremap for all
enabled BARs and will run tests against all enabled BARs, so it will run
tests against the BARs marked as BAR_RESERVED.
After running the BAR tests (which will write to all enabled BARs), the
inbound address translation is broken. This is because the tegra controller
exposes the ATU Port Logic Structure in BAR4, so when BAR4 is written, the
inbound address translation settings get overwritten.
To avoid this, implement the dw_pcie_ep_ops .init() callback and start off
by disabling all BARs (pci-epf-test will later enable/configure BARs that
are not defined as BAR_RESERVED).
This matches the behavior of other PCIe endpoint drivers: dra7xx, imx6,
layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and uniphier-ep.
With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST (which
was specifically made to detect address translation issues) passes.
The return value from tegra_bpmp_transfer() indicates the success or
failure of the IPC transaction with BPMP. If the transaction succeeded, we
also need to check the actual command's result code.
If we don't have error handling for tegra_bpmp_transfer(), we will set the
pcie->ep_state to EP_STATE_ENABLED even when the tegra_bpmp_transfer()
command fails. Thus, the pcie->ep_state will get out of sync with reality,
and any further PERST# assert + deassert will be a no-op and will not
trigger the hardware initialization sequence.
This is because pex_ep_event_pex_rst_deassert() checks the current
pcie->ep_state, and does nothing if the current state is already
EP_STATE_ENABLED.
Thus, it is important to have error handling for tegra_bpmp_transfer(),
such that the pcie->ep_state can not get out of sync with reality, so that
we will try to initialize the hardware not only during the first PERST#
assert + deassert, but also during any succeeding PERST# assert + deassert.
One example where this fix is needed is when using a rock5b as host.
During the initial PERST# assert + deassert (triggered by the bootloader on
the rock5b) pex_ep_event_pex_rst_deassert() will get called, but for some
unknown reason, the tegra_bpmp_transfer() call to initialize the PHY fails.
Once Linux has been loaded on the rock5b, the PCIe driver will once again
assert + deassert PERST#. However, without tegra_bpmp_transfer() error
handling, this second PERST# assert + deassert will not trigger the
hardware initialization sequence.
With tegra_bpmp_transfer() error handling, the second PERST# assert +
deassert will once again trigger the hardware to be initialized and this
time the tegra_bpmp_transfer() succeeds.
The pci_epc_raise_irq() supplies a MSI or MSI-X interrupt number in range
(1-N), as per the pci_epc_raise_irq() kdoc, where N is 32 for MSI.
But tegra_pcie_ep_raise_msi_irq() incorrectly uses the interrupt number as
the MSI vector. This causes wrong MSI vector to be triggered, leading to
the failure of PCI endpoint Kselftest MSI_TEST test case.
To fix this issue, convert the interrupt number to MSI vector.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250922140822.519796-6-cassel@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rcar_msi_irq_unmask() function may be called from a PCI driver
request_threaded_irq() function. This triggers kernel/irq/manage.c
__setup_irq() which locks raw spinlock &desc->lock descriptor lock
and with that descriptor lock held, calls rcar_msi_irq_unmask().
Since the &desc->lock descriptor lock is a raw spinlock, and the rcar_msi
.mask_lock is not a raw spinlock, this setup triggers 'BUG: Invalid wait
context' with CONFIG_PROVE_RAW_LOCK_NESTING=y.
The pmsr_lock spinlock used to be necessary to synchronize access to the
PMSR register, because that access could have been triggered from either
config space access in rcar_pcie_config_access() or an exception handler
rcar_pcie_aarch32_abort_handler().
The rcar_pcie_aarch32_abort_handler() case is no longer applicable since
commit 6e36203bc14c ("PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read
which triggered an exception"), which performs more accurate, controlled
invocation of the exception, and a fixup.
This leaves rcar_pcie_config_access() as the only call site from which
rcar_pcie_wakeup() is called. The rcar_pcie_config_access() can only be
called from the controller struct pci_ops .read and .write callbacks,
and those are serialized in drivers/pci/access.c using raw spinlock
'pci_lock' . It should be noted that CONFIG_PCI_LOCKLESS_CONFIG is never
set on this platform.
Since the 'pci_lock' is a raw spinlock , and the 'pmsr_lock' is not a
raw spinlock, this constellation triggers 'BUG: Invalid wait context'
with CONFIG_PROVE_RAW_LOCK_NESTING=y .
Remove the pmsr_lock to fix the locking.
Fixes: a115b1bd3af0 ("PCI: rcar: Add L1 link state fix into data abort hook") Reported-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250909162707.13927-1-marek.vasut+renesas@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page 4581
Figure 104.3b Initial Setting of PCIEC(example), middle of the figure
indicates that fourth write into register 0x148 [2:0] is 0x3 or
GENMASK(1, 0). The current code writes GENMASK(11, 0) which is a typo. Fix
the typo.
Fixes: faf5a975ee3b ("PCI: rcar-gen4: Add support for R-Car V4H") Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250806192548.133140-1-marek.vasut+renesas@mailbox.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit under Fixes introduced the IRQ handler for "ks-pcie-error-irq".
The interrupt is acquired using "request_irq()" but is never freed if
the driver exits due to an error. Although the section in the driver that
invokes "request_irq()" has moved around over time, the issue hasn't been
addressed until now.
Fix this by using "devm_request_irq()" which automatically frees the
interrupt if the driver exits.
The Cadence PCIe Controller integrated in the TI K3 SoCs supports both
Root-Complex and Endpoint modes of operation. The Glue Layer allows
"strapping" the Mode of operation of the Controller, the Link Speed
and the Link Width. This is enabled by programming the "PCIEn_CTRL"
register (n corresponds to the PCIe instance) within the CTRL_MMR
memory-mapped register space. The "reset-values" of the registers are
also different depending on the mode of operation.
Since the PCIe Controller latches onto the "reset-values" immediately
after being powered on, if the Glue Layer configuration is not done while
the PCIe Controller is off, it will result in the PCIe Controller latching
onto the wrong "reset-values". In practice, this will show up as a wrong
representation of the PCIe Controller's capability structures in the PCIe
Configuration Space. Some such capabilities which are supported by the PCIe
Controller in the Root-Complex mode but are incorrectly latched onto as
being unsupported are:
- Link Bandwidth Notification
- Alternate Routing ID (ARI) Forwarding Support
- Next capability offset within Advanced Error Reporting (AER) capability
Fix this by powering off the PCIe Controller before programming the "strap"
settings and powering it on after that. The runtime PM APIs namely
pm_runtime_put_sync() and pm_runtime_get_sync() will decrement and
increment the usage counter respectively, causing GENPD to power off and
power on the PCIe Controller.
Since commit 7b42d97e99d3 ("PCI/ERR: Always report current recovery
status for udev") AER uses the result of error_detected() as parameter
to pci_uevent_ers(). As pci_uevent_ers() however does not handle
PCI_ERS_RESULT_NEED_RESET this results in a missing uevent for the
beginning of recovery if drivers request a reset. Fix this by treating
PCI_ERS_RESULT_NEED_RESET as beginning recovery.
Fixes: 7b42d97e99d3 ("PCI/ERR: Always report current recovery status for udev") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20250807-add_err_uevents-v5-1-adf85b0620b0@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upon failure to recover from a PCIe error through AER, DPC or EDR, a
uevent is sent to inform user space about disconnection of the bridge
whose subordinate devices failed to recover.
However the bridge itself is not disconnected. Instead, a uevent should
be sent for each of the subordinate devices.
Only if the "bridge" happens to be a Root Complex Event Collector or
Integrated Endpoint does it make sense to send a uevent for it (because
there are no subordinate devices).
Right now if there is a mix of subordinate devices with and without
pci_error_handlers, a BEGIN_RECOVERY event is sent for those with
pci_error_handlers but no FAILED_RECOVERY event is ever sent for them
afterwards. Fix it.
Before disabling SR-IOV via config space accesses to the parent PF,
sriov_disable() first removes the PCI devices representing the VFs.
Since commit 9d16947b7583 ("PCI: Add global pci_lock_rescan_remove()")
such removal operations are serialized against concurrent remove and
rescan using the pci_rescan_remove_lock. No such locking was ever added
in sriov_disable() however. In particular when commit 18f9e9d150fc
("PCI/IOV: Factor out sriov_add_vfs()") factored out the PCI device
removal into sriov_del_vfs() there was still no locking around the
pci_iov_remove_virtfn() calls.
On s390 the lack of serialization in sriov_disable() may cause double
remove and list corruption with the below (amended) trace being observed:
This is because in addition to sriov_disable() removing the VFs, the
platform also generates hot-unplug events for the VFs. This being the
reverse operation to the hotplug events generated by sriov_enable() and
handled via pdev->no_vf_scan. And while the event processing takes
pci_rescan_remove_lock and checks whether the struct pci_dev still exists,
the lack of synchronization makes this checking racy.
Other races may also be possible of course though given that this lack of
locking persisted so long observable races seem very rare. Even on s390 the
list corruption was only observed with certain devices since the platform
events are only triggered by config accesses after the removal, so as long
as the removal finished synchronously they would not race. Either way the
locking is missing so fix this by adding it to the sriov_del_vfs() helper.
Just like PCI rescan-remove, locking is also missing in sriov_add_vfs()
including for the error case where pci_stop_and_remove_bus_device() is
called without the PCI rescan-remove lock being held. Even in the non-error
case, adding new PCI devices and buses should be serialized via the PCI
rescan-remove lock. Add the necessary locking.
The "max_link_width", "current_link_speed", "current_link_width",
"secondary_bus_number", and "subordinate_bus_number" sysfs files all access
config registers, but they don't check the runtime PM state. If the device
is in D3cold or a parent bridge is suspended, we may see -EINVAL, bogus
values, or worse, depending on implementation details.
Wrap these access in pci_config_pm_runtime_{get,put}() like most of the
rest of the similar sysfs attributes.
Notably, "max_link_speed" does not access config registers; it returns a
cached value since d2bd39c0456b ("PCI: Store all PCIe Supported Link
Speeds").
The tegra_msi_irq_unmask() function may be called from a PCI driver
request_threaded_irq() function. This triggers kernel/irq/manage.c
__setup_irq() which locks raw spinlock &desc->lock descriptor lock
and with that descriptor lock held, calls tegra_msi_irq_unmask().
Since the &desc->lock descriptor lock is a raw spinlock, and the tegra_msi
.mask_lock is not a raw spinlock, this setup triggers 'BUG: Invalid wait
context' with CONFIG_PROVE_RAW_LOCK_NESTING=y.
When PCIe has been set up by the bootloader, the ecam_size field in the
E_ECAM_CONTROL register already contains a value.
The driver previously programmed it to 0xc (for 16 busses; 16 MB), but
bumped to 0x10 (for 256 busses; 256 MB) by the commit 2fccd11518f1 ("PCI:
xilinx-nwl: Modify ECAM size to enable support for 256 buses").
Regardless of what the bootloader has programmed, the driver ORs in a
new maximal value without doing a proper RMW sequence. This can lead to
problems.
For example, if the bootloader programs in 0xc and the driver uses 0x10,
the ORed result is 0x1c, which is beyond the ecam_max_size limit of 0x10
(from E_ECAM_CAPABILITIES).
Avoid the problems by doing a proper RMW.
Fixes: 2fccd11518f1 ("PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses") Signed-off-by: Jani Nurminen <jani.nurminen@windriver.com>
[mani: added stable tag] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/e83a2af2-af0b-4670-bcf5-ad408571c2b0@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add "extern" to the glibc-defined weak rseq symbols to convert the rseq
selftest's usage from weak symbol definitions to weak symbol _references_.
Effectively re-defining the glibc symbols wreaks havoc when building with
-fno-common, e.g. generates segfaults when running multi-threaded programs,
as dynamically linked applications end up with multiple versions of the
symbols.
Building with -fcommon, which until recently has the been the default for
GCC and clang, papers over the bug by allowing the linker to resolve the
weak/tentative definition to glibc's "real" definition.
Note, the symbol itself (or rather its address), not the value of the
symbol, is set to 0/NULL for unresolved weak symbol references, as the
symbol doesn't exist and thus can't have a value. Check for a NULL rseq
size pointer to handle the scenario where the test is statically linked
against a libc that doesn't support rseq in any capacity.
Fixes: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") Reported-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Florian Weimer <fweimer@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As described in the old comment dating back to
commit 6610e0893b8b ("RTC: Rework RTC code to use timerqueue for events")
from 2010, we have been living with a race window when setting alarm
with an expiry in the near future (i.e. next second).
With 1 second resolution, it can happen that the second ticks after the
check for the timer having expired, but before the alarm is actually set.
When this happen, no alarm IRQ is generated, at least not with some RTC
chips (isl12022 is an example of this).
With UIE RTC timer being implemented on top of alarm irq, being re-armed
every second, UIE will occasionally fail to work, as an alarm irq lost
due to this race will stop the re-arming loop.
For now, I have limited the additional expiry check to only be done for
alarms set to next seconds. I expect it should be good enough, although I
don't know if we can now for sure that systems with loads could end up
causing the same problems for alarms set 2 seconds or even longer in the
future.
I haven't been able to reproduce the problem with this check in place.
When setting a normal alarm, user-space is responsible for using
RTC_AIE_ON/RTC_AIE_OFF to control if alarm irq should be enabled.
But when RTC_UIE_ON is used, interrupts must be enabled so that the
requested irq events are generated.
When RTC_UIE_OFF is used, alarm irq is disabled if there are no other
alarms queued, so this commit brings symmetry to that.
The of_platform_populate() call at the end of the function has a
possible failure path, causing a resource leak.
Replace of_iomap() with devm_platform_ioremap_resource() to ensure
automatic cleanup of srom->reg_base.
This issue was detected by smatch static analysis:
drivers/memory/samsung/exynos-srom.c:155 exynos_srom_probe()warn:
'srom->reg_base' from of_iomap() not released on lines: 155.
Fixes: 8ac2266d8831 ("memory: samsung: exynos-srom: Add support for bank configuration") Cc: stable@vger.kernel.org Signed-off-by: Zhen Ni <zhen.ni@easystack.cn> Link: https://lore.kernel.org/r/20250806025538.306593-1-zhen.ni@easystack.cn Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For multiple block read, the current implementation, transfer packet
includes cmd53 + cmd53 response + block nums*(1byte token +
block length bytes payload + 2bytes CRC + 1byte transfer), the last
1byte transfer of every block is not needed, so remove it.
Why doesn't multiple block read need CRC ack?
For read operation, host side get the payload and CRC value, then
will only check the CRC value to confirm if the data is correct or
not, but not send CRC ack to card. If the data is correct, save it,
or discard it and retransmit if data is error, so the last 1byte
transfer of every block make no sense.
What's the side effect of this 1byte transfer?
As the SPI is full duplex, if add this redundant 1byte transfer, SDIO
card side take it as the token of next block, then all the next sub
blocks sequence distort.
Turned out certain clearly invalid values passed in xdp_desc from
userspace can pass xp_{,un}aligned_validate_desc() and then lead
to UBs or just invalid frames to be queued for xmit.
desc->len close to ``U32_MAX`` with a non-zero pool->tx_metadata_len
can cause positive integer overflow and wraparound, the same way low
enough desc->addr with a non-zero pool->tx_metadata_len can cause
negative integer overflow. Both scenarios can then pass the
validation successfully.
This doesn't happen with valid XSk applications, but can be used
to perform attacks.
Always promote desc->len to ``u64`` first to exclude positive
overflows of it. Use explicit check_{add,sub}_overflow() when
validating desc->addr (which is ``u64`` already).
bloat-o-meter reports a little growth of the code size:
add/remove: 0/0 grow/shrink: 2/1 up/down: 60/-16 (44)
Function old new delta
xskq_cons_peek_desc 299 330 +31
xsk_tx_peek_release_desc_batch 973 1002 +29
xsk_generic_xmit 3148 3132 -16
but hopefully this doesn't hurt the performance much.
Fixes: 341ac980eab9 ("xsk: Support tx_metadata_len") Cc: stable@vger.kernel.org # 6.8+ Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Jason Xing <kerneljasonxing@gmail.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20251008165659.4141318-1-aleksander.lobakin@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once of_device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it could cause memory leak.
So fix this by calling put_device(), then the name can be freed in
kobject_cleanup().
Calling path: of_device_register() -> of_device_add() -> device_add().
As comment of device_add() says, 'if device_add() succeeds, you should
call device_del() when you want to get rid of it. If device_add() has
not succeeded, use only put_device() to drop the reference count'.
Found by code review.
Cc: stable@vger.kernel.org Fixes: cf44bbc26cf1 ("[SPARC]: Beginnings of generic of_device framework.") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt to exercise sparc hugetlb code in a sun4u-based guest
running under qemu results in the guest hanging due to being stuck
in a trap loop. This is due to invalid hugetlb TTEs being installed
that do not have the expected _PAGE_PMD_HUGE and page size bits set.
Although the breakage has gone apparently unnoticed for several years,
fix it now so there is the option to exercise sparc hugetlb code under
qemu. This can be useful because sun4v support in qemu does not support
linux guests currently and sun4v-based hardware resources may not be
readily available.
Fix tested with a 6.15.2 and 6.16-rc6 kernels by running libhugetlbfs
tests on a qemu guest running Debian 13.
Fixes: c7d9f77d33a7 ("sparc64: Multi-page size support") Cc: stable@vger.kernel.org Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Andreas Larsson <andreas@gaisler.com> Link: https://lore.kernel.org/r/20250716012446.10357-1-anthony.yznaga@oracle.com Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A build warning was triggered due to excessive stack usage in
sd_revalidate_disk():
drivers/scsi/sd.c: In function ‘sd_revalidate_disk.isra’:
drivers/scsi/sd.c:3824:1: warning: the frame size of 1160 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is caused by a large local struct queue_limits (~400B) allocated on
the stack. Replacing it with a heap allocation using kmalloc()
significantly reduces frame usage. Kernel stack is limited (~8 KB), and
allocating large structs on the stack is discouraged. As the function
already performs heap allocations (e.g. for buffer), this change fits
well.
Fixes: 804e498e0496 ("sd: convert to the atomic queue limits API") Cc: stable@vger.kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com> Link: https://lore.kernel.org/r/20250825183940.13211-2-abinashsinghlalotra@gmail.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace kmalloc() followed by copy_from_user() with memdup_user() to fix
a memory leak that occurs when copy_from_user(buff[sg_used],,) fails and
the 'cleanup1:' path does not free the memory for 'buff[sg_used]'. Using
memdup_user() avoids this by freeing the memory internally.
Since memdup_user() already allocates memory, use kzalloc() in the else
branch instead of manually zeroing 'buff[sg_used]' using memset(0).
Cc: stable@vger.kernel.org Fixes: edd163687ea5 ("[SCSI] hpsa: add driver for HP Smart Array controllers.") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a CPU chooses to call push_dl_task and picks a task to push to
another CPU's runqueue then it will call find_lock_later_rq method
which would take a double lock on both CPUs' runqueues. If one of the
locks aren't readily available, it may lead to dropping the current
runqueue lock and reacquiring both the locks at once. During this window
it is possible that the task is already migrated and is running on some
other CPU. These cases are already handled. However, if the task is
migrated and has already been executed and another CPU is now trying to
wake it up (ttwu) such that it is queued again on the runqeue
(on_rq is 1) and also if the task was run by the same CPU, then the
current checks will pass even though the task was migrated out and is no
longer in the pushable tasks list.
Please go through the original rt change for more details on the issue.
To fix this, after the lock is obtained inside the find_lock_later_rq,
it ensures that the task is still at the head of pushable tasks list.
Also removed some checks that are no longer needed with the addition of
this new check.
However, the new check of pushable tasks list only applies when
find_lock_later_rq is called by push_dl_task. For the other caller i.e.
dl_task_offline_migration, existing checks are used.
This patch has a subtle bug that can cause the IPMI driver to go into an
infinite loop if the BMC misbehaves in a certain way. Apparently
certain BMCs do misbehave this way because several reports have come in
recently about this.
The 'enable' register should be BERLIN_PWM_EN rather than
BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there
will be cpu exception then kernel panic during suspend/resume.
CHARGE_CONTROL_LIMIT is a wrong property to report charge current limit,
because `CHARGE_*` attributes represents capacity, not current. The
correct attribute to report and set charge current limit is
CONSTANT_CHARGE_CURRENT.
Rename CHARGE_CONTROL_LIMIT to CONSTANT_CHARGE_CURRENT.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 91428ca9320e ("parisc: Check region is readable by user in raw_copy_from_user()") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar in nature to ab107276607af90b13a5994997e19b7b9731e251. glibc-2.42
drops the legacy termio struct, but the ioctls.h header still defines some
TC* constants in terms of termio (via sizeof). Hardcode the values instead.
This fixes building Python for example, which falls over like:
./Modules/termios.c:1119:16: error: invalid application of 'sizeof' to incomplete type 'struct termio'
openat2 had a bug: if we pass RESOLVE_NO_XDEV, then openat2
doesn't traverse through automounts, but may still trigger them.
(See the link for full bug report with reproducer.)
In of_unittest_pci_node_verify(), when the add parameter is false,
device_find_any_child() obtains a reference to a child device. This
function implicitly calls get_device() to increment the device's
reference count before returning the pointer. However, the caller
fails to properly release this reference by calling put_device(),
leading to a device reference count leak. Add put_device() in the else
branch immediately after child_dev is no longer needed.
As the comment of device_find_any_child states: "NOTE: you will need
to drop the reference with put_device() after use".
Found by code review.
Cc: stable@vger.kernel.org Fixes: 26409dd04589 ("of: unittest: Add pci_dt_testdrv pci driver") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loop_change_fd() and loop_configure() call loop_check_backing_file()
to validate the new backing file. If validation fails, the reference
acquired by fget() was not dropped, leaking a file reference.
Fix this by calling fput(file) before returning the error.
Cc: stable@vger.kernel.org Cc: Markus Elfring <Markus.Elfring@web.de> CC: Yang Erkun <yangerkun@huawei.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Yu Kuai <yukuai1@huaweicloud.com> Fixes: f5c84eff634b ("loop: Add sanity check for read/write_iter") Signed-off-by: Li Chen <chenl311@chinatelecom.cn> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yang Erkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to drop the reference taken when looking up the genpool platform
device in of_gen_pool_get() before returning the pool.
Note that holding a reference to a device does typically not prevent its
devres managed resources from being released so there is no point in
keeping the reference.
Link: https://lkml.kernel.org/r/20250924080207.18006-1-johan@kernel.org Fixes: 9375db07adea ("genalloc: add devres support, allow to find a managed pool by device") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: <stable@vger.kernel.org> [3.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To prevent timing attacks, HMAC value comparison needs to be constant
time. Replace the memcmp() with the correct function, crypto_memneq().
[For the Fixes commit I used the commit that introduced the memcmp().
It predates the introduction of crypto_memneq(), but it was still a bug
at the time even though a helper function didn't exist yet.]
Fixes: d00a1c72f7f4 ("keys: add new trusted key-type") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
