Nothing calls stmmac_pcs_ctrl_ane() with the "loopback" argument set to
anything except zero, so this serves no useful purpose. Remove the
argument to reduce the code complexity.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/E1v9P6I-0000000Aola-3Sih@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the "we always autoneg pause" forcing when the stmmac driver
decides that a "PCS" is present, which blocks passing the ethtool
pause calls to phylink when using SGMII mode.
This prevents the pause results being reported when a PHY is attached
using SGMII mode, or the pause settings being changed in SGMII mode.
There is no reason to prevent this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/E1v9P6D-0000000AolU-2zjv@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the only use for the interrupt is to clear it and increment a
statistic counter (which is not that relevant anymore) remove all this
code and ensure that the interrupt remains disabled to avoid a stuck
interrupt.
dwmac-sun8i still uses this statistic counter, so it is inappropriate
for this patch to remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/E1v9P68-0000000AolO-2W5s@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a result of the previous commit, the pcs_link, pcs_duplex and
pcs_speed members are not used outside of the interrupt handling code,
and are only used to print their status using the misleading "Link is"
messages that bear no relation to the actual status of the link.
Remove the printing of these messages, these members, and the code
that decodes them from the hardware.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/E1v9P63-0000000AolI-23Kf@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changing the netif_carrier_*() state behind phylink's back has always
been prohibited because it messes up with phylinks state tracking, and
means that phylink no longer guarantees to call the mac_link_down()
and mac_link_up() methods at the appropriate times. This was later
documented in the sfp-phylink network driver conversion guide.
stmmac was converted to phylink in 2019, but nothing was done with the
"PCS" code. Since then, apart from the updates as part of phylink
development, nothing has happened with stmmac to improve its use of
phylink, or even to address this point.
A couple of years ago, a has_integrated_pcs boolean was added by Bart,
which later became the STMMAC_FLAG_HAS_INTEGRATED_PCS flag, to avoid
manipulating the netif_carrier_*() state. This flag is mis-named,
because whenever the stmmac is synthesized for its native SGMII, TBI
or RTBI interfaces, it has an "integrated PCS". This boolean/flag
actually means "ignore the status from the integrated PCS".
Discussing with Bart, the reasons for this are lost to the winds of
time (which is why we should always document the reasons in the commit
message.)
RGMII also has in-band status, and the dwmac cores and stmmac code
supports this but with one bug that saves the day.
When dwmac cores are synthesised for RGMII only, they do not contain
an integrated PCS, and so priv->dma_cap.pcs is clear, which prevents
(incorrectly) the "RGMII PCS" being used, meaning we don't read the
in-band status. However, a core synthesised for RGMII and also SGMII,
TBI or RTBI will have this capability bit set, thus making these
code paths reachable.
The Jetson Xavier NX uses RGMII mode to talk to its PHY, and removing
the incorrect check for priv->dma_cap.pcs reveals the theortical issue
with netif_carrier_*() manipulation is real:
dwc-eth-dwmac 2490000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=141)
dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
8021q: adding VLAN 0 to HW filter on device eth0
dwc-eth-dwmac 2490000.ethernet eth0: Adding VLAN ID 0 is not supported
Link is Up - 1000/Full
Link is Down
Link is Up - 1000/Full
This looks good until one realises that the phylink "Link" status
messages are missing, even when the RJ45 cable is reconnected. Nothing
one can do results in the interface working. The interrupt handler
(which prints those "Link is" messages) always wins over phylink's
resolve worker, meaning phylink never calls the mac_link_up() nor
mac_link_down() methods.
eth0 also sees no traffic received, and is unable to obtain a DHCP
address:
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group defa
ult qlen 1000
link/ether e6:d3:6a:e6:92:de brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
0 0 0 0 0 0
TX: bytes packets errors dropped carrier collsns
27686 149 0 0 0 0
With the STMMAC_FLAG_HAS_INTEGRATED_PCS flag set, which disables the
netif_carrier_*() manipulation then stmmac works normally:
dwc-eth-dwmac 2490000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwc-eth-dwmac 2490000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=141)
dwc-eth-dwmac 2490000.ethernet eth0: No Safety Features support found
dwc-eth-dwmac 2490000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
dwc-eth-dwmac 2490000.ethernet eth0: registered PTP clock
dwc-eth-dwmac 2490000.ethernet eth0: configuring for phy/rgmii-id link mode
8021q: adding VLAN 0 to HW filter on device eth0
dwc-eth-dwmac 2490000.ethernet eth0: Adding VLAN ID 0 is not supported
Link is Up - 1000/Full
dwc-eth-dwmac 2490000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
and packets can be transferred.
This clearly shows that when priv->hw->pcs is set, but
STMMAC_FLAG_HAS_INTEGRATED_PCS is clear, the driver reliably fails.
Discovering whether a platform falls into this is impossible as
parsing all the dtsi and dts files to find out which use the stmmac
driver, whether any of them use RGMII or SGMII and also depends
whether an external interface is being used. The kernel likely
doesn't contain all dts files either.
The only driver that sets this flag uses the qcom,sa8775p-ethqos
compatible, and uses SGMII or 2500BASE-X.
but these are saved from this problem by the incorrect check for
priv->dma_cap.pcs.
So, we have to assume that for every other platform that uses SGMII
with stmmac is using an external PCS.
Moreover, ethtool output can be incorrect. With the full-duplex link
negotiated, ethtool reports:
Speed: 1000Mb/s
Duplex: Half
because with dwmac4, the full-duplex bit is in bit 16 of the status,
priv->xstats.pcs_duplex becomes BIT(16) for full duplex, but the
ethtool ksettings duplex member is u8 - so becomes zero. Moreover,
the supported, advertised and link partner modes are all "not
reported".
Finally, ksettings_set() won't be able to set the advertisement on
a PHY if this PCS code is activated, which is incorrect when SGMII
is used with a PHY.
Thus, remove:
1. the incorrect netif_carrier_*() manipulation.
2. the broken ethtool ksettings code.
Given that all uses of STMMAC_FLAG_HAS_INTEGRATED_PCS are now gone,
remove the flag from stmmac.h and dwmac-qcom-ethqos.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://patch.msgid.link/E1v9P5y-0000000AolC-1QWH@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Randy Dunlap [Thu, 16 Oct 2025 03:59:17 +0000 (20:59 -0700)]
nl802154: fix some kernel-doc warnings
Correct multiple kernel-doc warnings in nl802154.h:
- Fix a typo on one enum name to avoid a kernel-doc warning.
- Drop 2 enum descriptions that are no longer needed.
- Mark 2 internal enums as "private:" so that kernel-doc is not needed
for them.
Warning: nl802154.h:239 Enum value 'NL802154_CAP_ATTR_MAX_MAXBE' not described in enum 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:239 Excess enum value '%NL802154_CAP_ATTR_MIN_CCA_ED_LEVEL' description in 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:239 Excess enum value '%NL802154_CAP_ATTR_MAX_CCA_ED_LEVEL' description in 'nl802154_wpan_phy_capability_attr'
Warning: nl802154.h:369 Enum value '__NL802154_CCA_OPT_ATTR_AFTER_LAST' not described in enum 'nl802154_cca_opts'
Warning: nl802154.h:369 Enum value 'NL802154_CCA_OPT_ATTR_MAX' not described in enum 'nl802154_cca_opts'
Eric Dumazet [Fri, 17 Oct 2025 14:53:34 +0000 (14:53 +0000)]
net: add a fast path in __netif_schedule()
Cpus serving NIC interrupts and specifically TX completions are often
trapped in also restarting a busy qdisc (because qdisc was stopped by BQL
or the driver's own flow control).
When they call netdev_tx_completed_queue() or netif_tx_wake_queue(),
they call __netif_schedule() so that the queue can be run
later from net_tx_action() (involving NET_TX_SOFTIRQ)
Quite often, by the time the cpu reaches net_tx_action(), another cpu
grabbed the qdisc spinlock from __dev_xmit_skb(), and we spend too much
time spinning on this lock.
We can detect in __netif_schedule() if a cpu is already at a specific
point in __dev_xmit_skb() where we have the guarantee the queue will
be run.
This patch gives a 13 % increase of throughput on an IDPF NIC (200Gbit),
32 TX qeues, sending UDP packets of 120 bytes.
This also helps __qdisc_run() to not force a NET_TX_SOFTIRQ
if another thread is waiting in __dev_xmit_skb()
Before:
sar -n DEV 5 5|grep eth1|grep Average
Average: eth1 1496.44 52191462.56 210.00 13369396.90 0.00 0.00 0.00 54.76
After:
sar -n DEV 5 5|grep eth1|grep Average
Average: eth1 1457.88 59363099.96 205.08 15206384.35 0.00 0.00 0.00 62.29
====================
net: dsa: lantiq_gswip: clean up and improve VLAN handling
This series was developed by Vladimir Oltean to improve and clean up the
VLAN handling logic in the Lantiq GSWIP DSA driver.
As Vladimir currently doesn't have the availability to take care of the
submission process, we agreed that I would send the patches on his
behalf.
The series focuses on consolidating the VLAN management paths for both
VLAN-unaware and VLAN-aware bridges, simplifying internal logic, and
removing legacy or redundant code. It also fixes a number of subtle
inconsistencies regarding VLAN ID 0 handling, bridge FDB entries, and
brings the driver into shape to permit dynamic changes to the VLAN
filtering state.
Notable changes include:
- Support for bridge FDB entries on the CPU port
- Consolidation of gswip_vlan_add_unaware() and gswip_vlan_add_aware()
into a unified implementation
- Removal of legacy VLAN configuration options and redundant
assignments
- Improved handling of VLAN ID 0 and PVID behavior
- Better validation and error reporting in VLAN removal paths
- Support for dynamic VLAN filtering configuration changes
Overall, this refactor improves readability and maintainability of the
Lantiq GSWIP DSA driver. It also results in all local-termination.sh
tests now passing, and slightly improves the results of
bridge-vlan-{un,}aware.sh.
All patches have been authored by Vladimir Oltean; a small unintended
functional change in patch "net: dsa: lantiq_gswip: merge
gswip_vlan_add_unaware() and gswip_vlan_add_aware()" has been ironed out
and some of the commit descriptions were improved by me, apart from that
I'm only handling the submission and will help with follow-up
discussions or review feedback as needed.
Despite the fact that some changes here do actually fix things (in the
sense that selftests which would previously FAIL now PASS) we decided
that it would be the best for this series of patches to go via net-next.
If requested some of it can still be ported to stable kernels later on.
====================
Vladimir Oltean [Wed, 15 Oct 2025 22:34:01 +0000 (23:34 +0100)]
net: dsa: lantiq_gswip: treat VID 0 like the PVID
Documentation/networking/switchdev.rst says that VLAN-aware bridges must
treat packets tagged with VID 0 the same as untagged. It appears from
the documentation that setting the GSWIP_PCE_VCTRL_VID0 flag (which this
driver already had defined) might achieve this.
Vladimir Oltean [Wed, 15 Oct 2025 22:33:50 +0000 (23:33 +0100)]
net: dsa: lantiq_gswip: drop untagged on VLAN-aware bridge ports with no PVID
Implement the required functionality, as written in
Documentation/networking/switchdev.rst section "Bridge VLAN filtering",
by using the "VLAN Ingress Tag Rule" feature of the switch.
The bit field definitions for this were found while browsing the Intel
dual BSD/GPLv2 licensed drivers for this switch IP.
Vladimir Oltean [Wed, 15 Oct 2025 22:33:33 +0000 (23:33 +0100)]
net: dsa: lantiq_gswip: remove vlan_aware and pvid arguments from gswip_vlan_remove()
"bool pvid" is unused since commit "net: dsa: lantiq_gswip: remove
legacy configure_vlan_while_not_filtering option".
"bool vlan_aware" shouldn't have a role in finding the bridge VLAN.
It should be identified by VID regardless of VLAN-aware or VLAN-unaware.
The driver sets up VID 0 for the VLAN-unaware PVID.
Vladimir Oltean [Wed, 15 Oct 2025 22:33:25 +0000 (23:33 +0100)]
net: dsa: lantiq_gswip: disallow changes to privately set up VID 0
User space can force the altering of VID 0 as it was privately set up by
this driver.
For example, when the port joins a VLAN-aware bridge,
dsa_user_manage_vlan_filtering() will set NETIF_F_HW_VLAN_CTAG_FILTER.
If the port is subsequently brought up and CONFIG_VLAN_8021Q is enabled,
the vlan_vid0_add() function will want to make sure we are capable of
accepting packets tagged with VID 0.
Generally, DSA/switchdev drivers want to suppress that bit of help from
the 8021q layer, and handle VID 0 filters themselves. The 8021q layer
might actually be even detrimential, because VLANs added through
vlan_vid_add() pass through dsa_user_vlan_rx_add_vid(), which is
documented as this:
/* This API only allows programming tagged, non-PVID VIDs */
.flags = 0,
so it will force VID 0 to be reconfigured as egress-tagged, non-PVID.
Whereas the driver configures it as PVID and egress-untagged, the exact
opposite.
Vladimir Oltean [Wed, 15 Oct 2025 22:32:58 +0000 (23:32 +0100)]
net: dsa: lantiq_gswip: permit dynamic changes to VLAN filtering state
The driver should now tolerate these changes, now that the PVID is
automatically recalculated on a VLAN awareness state change.
The VLAN-unaware PVID must be installed to hardware even if the
joined bridge is currently VLAN-aware. Otherwise, when the bridge VLAN
filtering state dynamically changes to VLAN-unaware later, this PVID
will be missing.
This driver doesn't support dynamic VLAN filtering changes, for simplicity.
It expects that on a port, either gswip_vlan_add_unaware() or
gswip_vlan_add_aware() is called, but not both.
When !br_vlan_enabled(), the configure_vlan_while_not_filtering = false
option is exactly what will prevent calls to gswip_port_vlan_add() from
being issued by DSA.
In fact, at the time these features were submitted:
https://patchwork.ozlabs.org/project/netdev/patch/20190501204506.21579-3-hauke@hauke-m.de/
"configure_vlan_while_not_filtering = false" did not even have a name,
it was implicit behaviour. It only became legacy in commit 54a0ed0df496
("net: dsa: provide an option for drivers to always receive bridge
VLANs").
Section "Bridge VLAN filtering" of Documentation/networking/switchdev.rst
describes the exact set of rules. Notably, the PVID of the port must
follow the VLAN awareness state of the bridge port. A VLAN-unaware
bridge port should not respond to the addition of a bridge VLAN with the
PVID flag. In fact, the pvid_change() test in
tools/testing/selftests/net/forwarding/bridge_vlan_unaware.sh tests
exactly this.
The lantiq_gswip driver indeed does not respond to the addition of PVID
VLANs while VLAN-unaware in the way described above, but only because of
configure_vlan_while_not_filtering. Our purpose here is to get rid of
configure_vlan_while_not_filtering, so we must add more complex logic
which follows the VLAN awareness state and walks through the Active VLAN
table entries, to find the index of the PVID register that should be
committed to hardware on each port.
As a side-effect of now having a proper implementation to assign the
PVID all the "VLAN upper: ..." tests of the local_termination.sh self-
tests which would previously all FAIL now all PASS (or XFAIL, but
that's ok).
Vladimir Oltean [Wed, 15 Oct 2025 22:32:41 +0000 (23:32 +0100)]
net: dsa: lantiq_gswip: merge gswip_vlan_add_unaware() and gswip_vlan_add_aware()
The two functions largely duplicate functionality. The differences
consist in:
- the "fid" passed to gswip_vlan_active_create(). The unaware variant
always passes -1, the aware variant passes fid = priv->vlans[i].fid,
where i is an index into priv->vlans[] for which priv->vlans[i].bridge
is equal to the given bridge.
- the "vid" is not passed to gswip_vlan_add_unaware(). It is implicitly
GSWIP_VLAN_UNAWARE_PVID (zero).
- The "untagged" is not passed to gswip_vlan_add_unaware(). It is
implicitly true. Also, the CPU port must not be a tag member of the
PVID used for VLAN-unaware bridging.
- The "pvid" is not passed to gswip_vlan_add_unaware(). It is implicitly
true.
- The GSWIP_PCE_DEFPVID(port) register is written by the aware variant
with an "idx", but with a hardcoded 0 by the unaware variant.
Merge the two functions into a single unified function without any
functional changes.
Vladimir Oltean [Wed, 15 Oct 2025 22:32:05 +0000 (23:32 +0100)]
net: dsa: lantiq_gswip: support bridge FDB entries on the CPU port
Currently, the driver takes the bridge from dsa_port_bridge_dev_get(),
which only works for user ports. This is why it has to ignore FDB
entries installed on the CPU port.
Commit c26933639b54 ("net: dsa: request drivers to perform FDB
isolation") introduced the possibility of getting the originating bridge
from the passed dsa_db argument, so let's do that instead. This way, we
can act on the local FDB entries coming from the bridge.
Note that we do not expect FDB events for the DSA_DB_PORT database,
because this driver doesn't fulfill the dsa_switch_supports_uc_filtering()
requirements. So we can just return -EOPNOTSUPP and expect it will never
be triggered.
We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 18 files changed, 577 insertions(+), 38 deletions(-).
The main changes are:
1) Bypass the global per-protocol memory accounting either by setting
a netns sysctl or using bpf_setsockopt in a bpf program,
from Kuniyuki Iwashima.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
bpf: Introduce SK_BPF_BYPASS_PROT_MEM.
bpf: Support bpf_setsockopt() for BPF_CGROUP_INET_SOCK_CREATE.
net: Introduce net.core.bypass_prot_mem sysctl.
net: Allow opt-out from global protocol memory accounting.
tcp: Save lock_sock() for memcg in inet_csk_accept().
====================
Eric Biggers [Tue, 14 Oct 2025 21:58:36 +0000 (14:58 -0700)]
tcp: Convert tcp-md5 to use MD5 library instead of crypto_ahash
Make tcp-md5 use the MD5 library API (added in 6.18) instead of the
crypto_ahash API. This is much simpler and also more efficient:
- The library API just operates on struct md5_ctx. Just allocate this
struct on the stack instead of using a pool of pre-allocated
crypto_ahash and ahash_request objects.
- The library API accepts standard pointers and doesn't require
scatterlists. So, for hashing the headers just use an on-stack buffer
instead of a pool of pre-allocated kmalloc'ed scratch buffers.
- The library API never fails. Therefore, checking for MD5 hashing
errors is no longer necessary. Update tcp_v4_md5_hash_skb(),
tcp_v6_md5_hash_skb(), tcp_v4_md5_hash_hdr(), tcp_v6_md5_hash_hdr(),
tcp_md5_hash_key(), tcp_sock_af_ops::calc_md5_hash, and
tcp_request_sock_ops::calc_md5_hash to return void instead of int.
- The library API provides direct access to the MD5 code, eliminating
unnecessary overhead such as indirect function calls and scatterlist
management. Microbenchmarks of tcp_v4_md5_hash_skb() on x86_64 show a
speedup from 7518 to 7041 cycles (6% fewer) with skb->len == 1440, or
from 1020 to 678 cycles (33% fewer) with skb->len == 140.
Since tcp_sigpool_hash_skb_data() can no longer be used, add a function
tcp_md5_hash_skb_data() which is specialized to MD5. Of course, to the
extent that this duplicates any code, it's well worth it.
To preserve the existing behavior of TCP-MD5 support being disabled when
the kernel is booted with "fips=1", make tcp_md5_do_add() check
fips_enabled itself. Previously it relied on the error from
crypto_alloc_ahash("md5") being bubbled up. I don't know for sure that
this is actually needed, but this preserves the existing behavior.
Tested with bidirectional TCP-MD5, both IPv4 and IPv6, between a kernel
that includes this commit and a kernel that doesn't include this commit.
(Side note: please don't use TCP-MD5! It's cryptographically weak. But
as long as Linux supports it, it might as well be implemented properly.)
The io_uring functions return negative error values, but error() expects
these to be positive to properly match them to an errno string. Fix this
to make sure the correct error descriptions are displayed upon failure.
Heiner Kallweit [Thu, 16 Oct 2025 19:25:28 +0000 (21:25 +0200)]
r8169: reconfigure rx unconditionally before chip reset when resuming
There's a good chance that more chip versions suffer from the same
hw issue. So let's reconfigure rx unconditionally before the chip reset
when resuming. This shouldn't have any side effect on unaffected chip
versions.
Florian Westphal [Thu, 16 Oct 2025 11:51:47 +0000 (13:51 +0200)]
net: Kconfig: discourage drop_monitor enablement
Quoting Eric Dumazet:
"I do not understand the fascination with net/core/drop_monitor.c [..]
misses all the features, flexibility, scalability that 'perf',
eBPF tracing, bpftrace, .... have today."
Reword DROP_MONITOR kconfig help text to clearly state that its not
related to perf-based drop monitoring and that its safe to disable
this unless support for the older netlink-based tools is needed.
Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251016115147.18503-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After replacing R/W locks with RCU in commit 3ab5aee7fe84 ("net: Convert
TCP & DCCP hash tables to use RCU / hlist_nulls"), a race window emerged
during the switch from reqsk/sk to sk/tw.
Now that both timewait sock (tw) and full sock (sk) reside on the same
ehash chain, it is appropriate to introduce hlist_nulls replace
operations, to eliminate the race conditions caused by this window.
Before this series of patches, I previously sent another version of the
patch, attempting to avoid the issue using a lock mechanism. However, it
seems there are some problems with that approach now, so I've switched to
the "replace" method in the current patches to resolve the issue.
For details, refer to:
https://lore.kernel.org/netdev/20250903024406.2418362-1-xuanqiang.luo@linux.dev/
Before I encountered this type of issue recently, I found there had been
several historical discussions about it. Therefore, I'm adding this
background information for those interested to reference:
1. https://lore.kernel.org/lkml/20230118015941.1313-1-kerneljasonxing@gmail.com/
2. https://lore.kernel.org/netdev/20230606064306.9192-1-duanmuquan@baidu.com/
====================
Xuanqiang Luo [Wed, 15 Oct 2025 02:02:36 +0000 (10:02 +0800)]
inet: Avoid ehash lookup race in inet_twsk_hashdance_schedule()
Since ehash lookups are lockless, if another CPU is converting sk to tw
concurrently, fetching the newly inserted tw with tw->tw_refcnt == 0 cause
lookup failure.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_twsk_hashdance_schedule()
spin_lock()
inet_twsk_add_node_rcu(tw, ...)
__inet_lookup_established()
(find tw, failure due to tw_refcnt = 0)
__sk_nulls_del_node_init_rcu(sk)
refcount_set(&tw->tw_refcnt, 3)
spin_unlock()
By replacing sk with tw atomically via hlist_nulls_replace_init_rcu() after
setting tw_refcnt, we ensure that tw is either fully initialized or not
visible to other CPUs, eliminating the race.
It's worth noting that we held lock_sock() before the replacement, so
there's no need to check if sk is hashed. Thanks to Kuniyuki Iwashima!
Fixes: 3ab5aee7fe84 ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls") Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251015020236.431822-4-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuanqiang Luo [Wed, 15 Oct 2025 02:02:35 +0000 (10:02 +0800)]
inet: Avoid ehash lookup race in inet_ehash_insert()
Since ehash lookups are lockless, if one CPU performs a lookup while
another concurrently deletes and inserts (removing reqsk and inserting sk),
the lookup may fail to find the socket, an RST may be sent.
The call trace map is drawn as follows:
CPU 0 CPU 1
----- -----
inet_ehash_insert()
spin_lock()
sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
(lookup failed)
__sk_nulls_add_node_rcu(sk, list)
spin_unlock()
As both deletion and insertion operate on the same ehash chain, this patch
introduces a new sk_nulls_replace_node_init_rcu() helper functions to
implement atomic replacement.
Fixes: 5e0724d027f0 ("tcp/dccp: fix hashdance race for passive sessions") Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev> Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251015020236.431822-3-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xuanqiang Luo [Wed, 15 Oct 2025 02:02:34 +0000 (10:02 +0800)]
rculist: Add hlist_nulls_replace_rcu() and hlist_nulls_replace_init_rcu()
Add two functions to atomically replace RCU-protected hlist_nulls entries.
Keep using WRITE_ONCE() to assign values to ->next and ->pprev, as
mentioned in the patch below:
commit efd04f8a8b45 ("rcu: Use WRITE_ONCE() for assignments to ->next for
rculist_nulls")
commit 860c8802ace1 ("rcu: Use WRITE_ONCE() for assignments to ->pprev for
hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn> Link: https://patch.msgid.link/20251015020236.431822-2-xuanqiang.luo@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Oct 2025 23:59:31 +0000 (16:59 -0700)]
Merge branch 'net-macb-various-cleanups'
Théo Lebrun says:
====================
net: macb: various cleanups
Fix many oddities inside the MACB driver. They accumulated in my
work-in-progress branch while working on MACB/GEM EyeQ5 support.
Part of this series has been seen on the lkml in March then June.
See below for a semblance of a changelog.
The initial goal was to post them alongside EyeQ5 support, but that
makes for too big of a series. It'll come afterwards, with new
features (interrupt coalescing, ethtool .set_channels() and XDP mostly).
Théo Lebrun [Tue, 14 Oct 2025 15:25:14 +0000 (17:25 +0200)]
net: macb: drop `count` local variable in macb_tx_map()
Local variable `count` is useless: it counts number of DMA descriptors
used and returns it. But the return value is only checked for error.
Drop counting the number of DMA descriptors and return a usual
negative-if-error integer.
Théo Lebrun [Tue, 14 Oct 2025 15:25:12 +0000 (17:25 +0200)]
net: macb: replace min() with umin() calls
Whenever min(a, b) is used with a and b unsigned variables or literals,
`make W=2` complains. Change four min() calls into umin().
stderr extract (GCC 11.2.0, MIPS Codescape):
./include/linux/minmax.h:68:57: warning: comparison is always true due
to limited range of data type [-Wtype-limits]
68 | #define __is_nonneg(ux) statically_true((long long)(ux) >= 0)
| ^~
drivers/net/ethernet/cadence/macb_main.c:2299:26: note: in expansion of
macro ‘min’
2299 | hdrlen = min(skb_headlen(skb), bp->max_tx_length);
| ^~~
Théo Lebrun [Tue, 14 Oct 2025 15:25:11 +0000 (17:25 +0200)]
net: macb: remove bp->queue_mask
The low 16 bits of GEM_DCFG6 tell us which queues are enabled in HW. In
theory, there could be holes in the bitfield. In practice, the macb
driver would fail if there were holes as most loops iterate upon
bp->num_queues. Only macb_init() iterated correctly.
- Drop bp->queue_mask field.
- Error out at probe if a hole is in the queue mask.
- Rely upon bp->num_queues for iteration.
- As we drop the queue_mask probe local variable, fix RCT.
- Compute queue_mask on the fly for TAPRIO using bp->num_queues.
Théo Lebrun [Tue, 14 Oct 2025 15:25:10 +0000 (17:25 +0200)]
net: macb: introduce DMA descriptor helpers (is 64bit? is PTP?)
Introduce macb_dma64() and macb_dma_ptp() helper functions.
Many codepaths are made simpler by dropping conditional compilation.
This implies two additional changes:
- Always compile related structure definitions inside <macb.h>.
- MACB_EXT_DESC can be dropped as it is useless now.
Théo Lebrun [Tue, 14 Oct 2025 15:25:07 +0000 (17:25 +0200)]
net: macb: simplify macb_dma_desc_get_size()
macb_dma_desc_get_size() does a switch on bp->hw_dma_cap and covers all
four cases: 0, 64B, PTP, 64B+PTP. It also covers the #ifndef
MACB_EXT_DESC separately, making it four codepaths.
Instead, notice the descriptor size grows with enabled features and use
plain if-statements on 64B and PTP flags.
Théo Lebrun [Tue, 14 Oct 2025 15:25:06 +0000 (17:25 +0200)]
net: macb: drop macb_config NULL checking
Remove NULL checks on macb_config as it is always valid:
- either it is its default value &default_gem_config,
- or it got overridden using match data.
====================
net: optimize TX throughput and efficiency
In this series, I replace the busylock spinlock we have in
__dev_queue_xmit() and use lockless list (llist) to reduce
spinlock contention to the minimum.
Idea is that only one cpu might spin on the qdisc spinlock,
while others simply add their skb in the llist.
After this series, we get a 300 % (4x) improvement on heavy TX workloads,
sending twice the number of packets per second, for half the cpu cycles.
====================
Eric Dumazet [Tue, 14 Oct 2025 17:19:07 +0000 (17:19 +0000)]
net: dev_queue_xmit() llist adoption
Remove busylock spinlock and use a lockless list (llist)
to reduce spinlock contention to the minimum.
Idea is that only one cpu might spin on the qdisc spinlock,
while others simply add their skb in the llist.
After this patch, we get a 300 % improvement on heavy TX workloads.
- Sending twice the number of packets per second.
- While consuming 50 % less cycles.
Note that this also allows in the future to submit batches
to various qdisc->enqueue() methods.
16 Mpps (41 Mpps if each thread is pinned to a different cpu)
vmstat 2 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
243 0 0 2368988672 51036 1100852 0 0 146 1 242 60 0 9 91 0 0
244 0 0 2368988672 51036 1100852 0 0 536 10 487745 14718 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 512 0 503067 46033 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 512 0 494807 12107 0 52 48 0 0
244 0 0 2368988672 51036 1100852 0 0 702 26 492845 10110 0 52 48 0 0
Lock contention (1 second sample taken on 8 cores)
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
442111 6.79 s 162.47 ms 15.35 us spinlock dev_hard_start_xmit+0xcd
5961 9.57 ms 8.12 us 1.60 us spinlock __dev_queue_xmit+0x3a0
244 560.63 us 7.63 us 2.30 us spinlock do_softirq+0x5b
13 25.09 us 3.21 us 1.93 us spinlock net_tx_action+0xf8
If netperf threads are pinned, spinlock stress is very high.
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
964508 7.10 s 147.25 ms 7.36 us spinlock dev_hard_start_xmit+0xcd
201 268.05 us 4.65 us 1.33 us spinlock __dev_queue_xmit+0x3a0
12 26.05 us 3.84 us 2.17 us spinlock do_softirq+0x5b
29 Mpps (57 Mpps if each thread is pinned to a different cpu)
vmstat 2 5
procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
r b swpd free buff cache si so bi bo in cs us sy id wa st
78 0 0 2369573632 32896 1350988 0 0 22 0 331 254 0 8 92 0 0
75 0 0 2369573632 32896 1350988 0 0 22 50 425713 280199 0 23 76 0 0
104 0 0 2369573632 32896 1350988 0 0 290 0 430238 298247 0 23 76 0 0
86 0 0 2369573632 32896 1350988 0 0 132 0 428019 291865 0 24 76 0 0
90 0 0 2369573632 32896 1350988 0 0 502 0 422498 278672 0 23 76 0 0
perf lock record -C0-7 sleep 1; perf lock contention
contended total wait max wait avg wait type caller
2524 116.15 ms 486.61 us 46.02 us spinlock __dev_queue_xmit+0x55b
5821 107.18 ms 371.67 us 18.41 us spinlock dev_hard_start_xmit+0xcd
2377 9.73 ms 35.86 us 4.09 us spinlock ___slab_alloc+0x4e0
923 5.74 ms 20.91 us 6.22 us spinlock ___slab_alloc+0x5c9
121 3.42 ms 193.05 us 28.24 us spinlock net_tx_action+0xf8
6 564.33 us 167.60 us 94.05 us spinlock do_softirq+0x5b
If netperf threads are pinned (~54 Mpps)
perf lock record -C0-7 sleep 1; perf lock contention
32907 316.98 ms 195.98 us 9.63 us spinlock dev_hard_start_xmit+0xcd
4507 61.83 ms 212.73 us 13.72 us spinlock __dev_queue_xmit+0x554
2781 23.53 ms 40.03 us 8.46 us spinlock ___slab_alloc+0x5c9
3554 18.94 ms 34.69 us 5.33 us spinlock ___slab_alloc+0x4e0
233 9.09 ms 215.70 us 38.99 us spinlock do_softirq+0x5b
153 930.66 us 48.67 us 6.08 us spinlock net_tx_action+0xfd
84 331.10 us 14.22 us 3.94 us spinlock ___slab_alloc+0x5c9
140 323.71 us 9.94 us 2.31 us spinlock ___slab_alloc+0x4e0
Eric Dumazet [Tue, 14 Oct 2025 17:19:03 +0000 (17:19 +0000)]
net: add add indirect call wrapper in skb_release_head_state()
While stress testing UDP senders on a host with expensive indirect
calls, I found cpus processing TX completions where showing
a very high cost (20%) in sock_wfree() due to
CONFIG_MITIGATION_RETPOLINE=y.
Take care of TCP and UDP TX destructors and use INDIRECT_CALL_3() macro.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Tested-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20251014171907.3554413-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shangjuan Wei [Wed, 15 Oct 2025 11:41:01 +0000 (19:41 +0800)]
net: stmmac: add Eswin EIC7700 glue driver
Add Ethernet controller support for Eswin's eic7700 SoC. The driver
implements hardware initialization, clock configuration, delay
adjustment functions based on DWC Ethernet controller, and supports
device tree configuration and platform driver integration.
Jakub Kicinski [Thu, 16 Oct 2025 22:58:24 +0000 (15:58 -0700)]
Merge branch 'net-stmmac-more-cleanups'
Russell King says:
====================
net: stmmac: more cleanups
The subject for the cover message is wearing thin as I've used it a
number of times, but the scope for cleaning up the driver continues,
and continue it will do, because this is just a small fraction of the
queue.
1. make a better job of one of my previous commits, moving the holding
of the lock into stmmac_mdio.c
2. move the mac_finish() method to be in-order with the layout of
struct phylink_mac_ops - this order was chosen because it reflects
the order that the methods are called, thus making the flow more
obvious when reading code.
3. continuing on the "removal of stuff that doesn't need to happen",
patch 3 removes the phylink_speed_(up|down) out of the path that
is used for MTU changes - we really don't need to fiddle with the
PHY advertisement when changing the MTU!
4. clean up tc_init()'s initialisation of flow_entries_max - this is
the sole place that this is written, and we might as well make the
code more easy to follow.
5. stmmac_phy_setup() really confuses me when I read the code, it's
not really about PHY setup, but about phylink setup. So, name its
name reflect its functionality.
====================
net: stmmac: rename stmmac_phy_setup() to include phylink
stmmac_phy_setup() does not set up any PHY, but does setup phylink.
Rename this function to stmmac_phylink_setup() to reflect more what
it is doing.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1v945d-0000000Ameh-3Bs7@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make future changes easier, rearrange the use of dma_cap->l3l4fnum
vs priv->flow_entries_max.
Always initialise priv->flow_entries_max from dma_cap->l3l4fnum, then
use priv->flow_entries_max to determine whether we allocate
priv->flow_entries and set it up.
This change is safe because tc_init() is only called once from
stmmac_dvr_probe().
net: stmmac: avoid PHY speed change when configuring MTU
There is no need to do the speed-down, speed-up dance when changing
the MTU as there is little power saving that can be gained from such
a brief interval between these, and the autonegotiation they cause
takes much longer.
Move the calls to phylink_speed_up() and phylink_speed_down() into
stmmac_open() and stmmac_release() respectively, reducing the work
done in the __-variants of these functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1v945T-0000000AmeV-2BvU@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: stmmac: place .mac_finish() method more appropriately
Place the .mac_finish() initialiser and implementation after the
.mac_config() initialiser and method which reflects the order that
they appear in struct phylink_mac_ops, and the order in which they
are called. This keeps logically similar code together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1v945O-0000000AmeP-1k0t@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: stmmac: dwc-qos-eth: move MDIO bus locking into stmmac_mdio
Rather than dwc-qos-eth manipulating the MDIO bus lock directly, add
helpers to the stmmac MDIO layer and use them in dwc-qos-eth. This
improves my commit 87f43e6f06a2 ("net: stmmac: dwc-qos: calibrate tegra
with mdio bus idle").
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/E1v945J-0000000AmeJ-1GOb@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When pci_alloc_irq_vectors() fail to allocate nvec number of vectors,
-ENOSPC is returned, so it would be safe to remove the check that
compares err with nvec.
Alok Tiwari [Wed, 15 Oct 2025 02:57:43 +0000 (19:57 -0700)]
net: amd-xgbe: use EOPNOTSUPP instead of ENOTSUPP in xgbe_phy_mii_read_c45
The MDIO read callback xgbe_phy_mii_read_c45() can propagate its return
value up through phylink_mii_ioctl() to user space via netdev ioctls such
as SIOCGMIIREG. Returning ENOTSUPP results in user space seeing
"Unknown error", since ENOTSUPP is not a standard errno value.
Replace ENOTSUPP with EOPNOTSUPP to align with the MDIO core’s
usage and ensure user space receives a proper "Operation not supported"
error instead of an unknown code.
====================
bpf: Allow opt-out from sk->sk_prot->memory_allocated.
This series allows opting out of the global per-protocol memory
accounting if socket is configured as such by sysctl or BPF prog.
This series is the successor of the series below [0], but the changes
now fall in net and bpf subsystems only.
I discussed with Roman Gushchin offlist, and he suggested not mixing
two independent subsystems and it would be cleaner not to depend on
memcg.
So, sk->sk_memcg and memcg code are no longer touched, and instead we
use another hole near sk->sk_prot to store a flag for the pure net
opt-out feature.
Overview of the series:
patch 1 is misc cleanup
patch 2 allows opt-out from sk->sk_prot->memory_allocated
patch 3 introduces net.core.bypass_prot_mem
patch 4 & 5 supports flagging sk->sk_bypass_prot_mem via bpf_setsockopt()
patch 6 is selftest
Thank you very much for all your help, Shakeel, Roman, Martin, and Eric!
selftests/bpf: Add test for sk->sk_bypass_prot_mem.
The test does the following for IPv4/IPv6 x TCP/UDP sockets
with/without sk->sk_bypass_prot_mem, which can be turned on by
net.core.bypass_prot_mem or bpf_setsockopt(SK_BPF_BYPASS_PROT_MEM).
1. Create socket pairs
2. Send NR_PAGES (32) of data (TCP consumes around 35 pages,
and UDP consuems 66 pages due to skb overhead)
3. Read memory_allocated from sk->sk_prot->memory_allocated and
sk->sk_prot->memory_per_cpu_fw_alloc
4. Check if unread data is charged to memory_allocated
If sk->sk_bypass_prot_mem is set, memory_allocated should not be
changed, but we allow a small error (up to 10 pages) in case
other processes on the host use some amounts of TCP/UDP memory.
The amount of allocated pages are buffered to per-cpu variable
{tcp,udp}_memory_per_cpu_fw_alloc up to +/- net.core.mem_pcpu_rsv
before reported to {tcp,udp}_memory_allocated.
At 3., memory_allocated is calculated from the 2 variables at
fentry of socket create function.
We drain the receive queue only for UDP before close() because UDP
recv queue is destroyed after RCU grace period. When I printed
memory_allocated, UDP bypass cases sometimes saw the no-bypass
case's leftover, but it's still in the small error range (<10 pages).
As with net.core.bypass_prot_mem, this is inherited to child sockets,
and BPF always takes precedence over sysctl at socket(2) and accept(2).
SK_BPF_BYPASS_PROT_MEM is only supported at BPF_CGROUP_INET_SOCK_CREATE
and not supported on other hooks for some reasons:
1. UDP charges memory under sk->sk_receive_queue.lock instead
of lock_sock()
2. Modifying the flag after skb is charged to sk requires such
adjustment during bpf_setsockopt() and complicates the logic
unnecessarily
We can support other hooks later if a real use case justifies that.
Most changes are inline and hard to trace, but a microbenchmark on
__sk_mem_raise_allocated() during neper/tcp_stream showed that more
samples completed faster with sk->sk_bypass_prot_mem == 1. This will
be more visible under tcp_mem pressure (but it's not a fair comparison).
With bpf prog in the next patch:
(must be attached before tcp_stream)
# bpftool prog load sk_bypass_prot_mem.bpf.o /sys/fs/bpf/test type cgroup/sock_create
# bpftool cgroup attach /sys/fs/cgroup/test cgroup_inet_sock_create pinned /sys/fs/bpf/test
net: Allow opt-out from global protocol memory accounting.
Some protocols (e.g., TCP, UDP) implement memory accounting for socket
buffers and charge memory to per-protocol global counters pointed to by
sk->sk_proto->memory_allocated.
Sometimes, system processes do not want that limitation. For a similar
purpose, there is SO_RESERVE_MEM for sockets under memcg.
Also, by opting out of the per-protocol accounting, sockets under memcg
can avoid paying costs for two orthogonal memory accounting mechanisms.
A microbenchmark result is in the subsequent bpf patch.
Let's allow opt-out from the per-protocol memory accounting if
sk->sk_bypass_prot_mem is true.
sk->sk_bypass_prot_mem and sk->sk_prot are placed in the same cache
line, and sk_has_account() always fetches sk->sk_prot before accessing
sk->sk_bypass_prot_mem, so there is no extra cache miss for this patch.
The following patches will set sk->sk_bypass_prot_mem to true, and
then, the per-protocol memory accounting will be skipped.
Note that this does NOT disable memcg, but rather the per-protocol one.
Another option not to use the hole in struct sock_common is create
sk_prot variants like tcp_prot_bypass, but this would complicate
SOCKMAP logic, tcp_bpf_prots etc.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Link: https://patch.msgid.link/20251014235604.3057003-3-kuniyu@google.com
tcp: Save lock_sock() for memcg in inet_csk_accept().
If memcg is enabled, accept() acquires lock_sock() twice for each new
TCP/MPTCP socket in inet_csk_accept() and __inet_accept().
Let's move memcg operations from inet_csk_accept() to __inet_accept().
Note that SCTP somehow allocates a new socket by sk_alloc() in
sk->sk_prot->accept() and clones fields manually, instead of using
sk_clone_lock().
mem_cgroup_sk_alloc() is called for SCTP before __inet_accept(),
so I added the protocol check in __inet_accept(), but this can be
removed once SCTP uses sk_clone_lock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Link: https://patch.msgid.link/20251014235604.3057003-2-kuniyu@google.com
Linus Torvalds [Thu, 16 Oct 2025 16:41:21 +0000 (09:41 -0700)]
Merge tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
Linus Torvalds [Thu, 16 Oct 2025 16:39:29 +0000 (09:39 -0700)]
Merge tag 'ata-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Do not print an error message (and assume that the General Purpose
Log Directory log page is not supported) for a device that reports a
bogus General Purpose Logging Version.
Unsurprisingly, many vendors fail to report the only valid General
Purpose Logging Version (Damien)
* tag 'ata-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: relax checks in ata_read_log_directory()
Eric Dumazet [Wed, 15 Oct 2025 05:27:15 +0000 (05:27 +0000)]
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
Michal reported and bisected an issue after recent adoption
of skb_attempt_defer_free() in UDP.
The issue here is that skb_release_head_state() is called twice per skb,
one time from skb_consume_udp(), then a second time from skb_defer_free_flush()
and napi_consume_skb().
As Sabrina suggested, remove skb_release_head_state() call from
skb_consume_udp().
Add a DEBUG_NET_WARN_ON_ONCE(skb_nfct(skb)) in skb_attempt_defer_free()
Many thanks to Michal, Sabrina, Paolo and Florian for their help.
Fixes: 6471658dc66c ("udp: use skb_attempt_defer_free()") Reported-and-bisected-by: Michal Kubecek <mkubecek@suse.cz> Closes: https://lore.kernel.org/netdev/gpjh4lrotyephiqpuldtxxizrsg6job7cvhiqrw72saz2ubs3h@g6fgbvexgl3r/ Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Michal Kubecek <mkubecek@suse.cz> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://patch.msgid.link/20251015052715.4140493-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiawen Wu [Tue, 14 Oct 2025 06:17:25 +0000 (14:17 +0800)]
net: txgbe: optimize the flow to setup PHY for AML devices
To adapt to new firmware for AML devices, the driver should send the
"SET_LINK_CMD" to the firmware only once when switching PHY interface
mode, and no longer needs to re-trigger PHY configuration based on the
RX signal interrupt (TXGBE_GPIOBIT_3).
In previous firmware versions, the PHY was configured only after receiving
"SET_LINK_CMD", and might remain incomplete if the RX signal was lost.
To handle this case, the driver used TXGBE_GPIOBIT_3 interrupt to resend
the command. This workaround is no longer necessary with the new firmware.
And the unknown link speed is permitted in the mailbox buffer.
Recent firmware updates introduce additional fields in the mailbox message
to provide more information for identifying 40G and 100G QSFP modules.
To accommodate these new fields, expand the mailbox buffer size by 4 bytes.
Without this change, drivers built against the updated firmware cannot
properly identify modules due to mismatched mailbox message lengths.
The old firmware version that used the smaller mailbox buffer has never
been publicly released, so there are no backward-compatibility concerns.
net: fbnic: Fix page chunking logic when PAGE_SIZE > 4K
The HW always works on a 4K page size. When the OS supports larger
pages, we fragment them across multiple BDQ descriptors.
We were not properly incrementing the descriptor, which resulted in us
specifying the last chunks id/addr and then 15 zero descriptors. This
would cause packet loss and driver crashes. This is not a fix since the
Kconfig prevents use outside of x86.
I Viswanath [Mon, 13 Oct 2025 18:16:48 +0000 (23:46 +0530)]
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
dev->chipid is used in lan78xx_init_mac_address before it's initialized:
lan78xx_reset() {
lan78xx_init_mac_address()
lan78xx_read_eeprom()
lan78xx_read_raw_eeprom() <- dev->chipid is used here
dev->chipid = ... <- dev->chipid is initialized correctly here
}
Reorder initialization so that dev->chipid is set before calling
lan78xx_init_mac_address().
Fixes: a0db7d10b76e ("lan78xx: Add to handle mux control per chip id") Signed-off-by: I Viswanath <viswanathiyyappan@gmail.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Khalid Aziz <khalid@kernel.org> Link: https://patch.msgid.link/20251013181648.35153-1-viswanathiyyappan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 16 Oct 2025 00:56:20 +0000 (17:56 -0700)]
Merge tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Lorenzo Bianconi [Mon, 13 Oct 2025 13:58:50 +0000 (15:58 +0200)]
net: airoha: npu: Add airoha_npu_soc_data struct
Introduce airoha_npu_soc_data structure in order to generalize per-SoC
NPU firmware info. Introduce airoha_npu_load_firmware utility routine.
This is a preliminary patch in order to introduce AN7583 NPU support.
====================
Preserve PSE PD692x0 configuration across reboots
Previously, the driver would always reconfigure the PSE hardware on
probe, causing a port matrix reflash that resulted in temporary power
loss to all connected devices. This change maintains power continuity
by preserving existing configuration when the PSE has been previously
initialized.
====================
net: pse-pd: pd692x0: Preserve PSE configuration across reboots
Detect when PSE hardware is already configured (user byte == 42) and
skip hardware initialization to prevent power interruption to connected
devices during system reboots.
Previously, the driver would always reconfigure the PSE hardware on
probe, causing a port matrix reflash that resulted in temporary power
loss to all connected devices. This change maintains power continuity
by preserving existing configuration when the PSE has been previously
initialized.
net: pse-pd: pd692x0: Separate configuration parsing from hardware setup
Cache the port matrix configuration in driver private data to enable
PSE controller reconfiguration. This refactoring separates device tree
parsing from hardware configuration application, allowing settings to be
reapplied without reparsing the device tree.
This refactoring is a prerequisite for preserving PSE configuration
across reboots to prevent power disruption to connected devices.
net: pse-pd: pd692x0: Replace __free macro with explicit kfree calls
Replace __free(kfree) with explicit kfree() calls to follow the net
subsystem policy of avoiding automatic cleanup macros as described in
the documentation.
Florian Fainelli [Mon, 13 Oct 2025 17:23:06 +0000 (10:23 -0700)]
net: bcmasp: Add support for PHY-based Wake-on-LAN
If available, interrogate the PHY to find out whether we can use it for
Wake-on-LAN. This can be a more power efficient way of implementing that
feature, especially when the MAC is powered off in low power states.
Breno Leitao [Tue, 14 Oct 2025 09:17:25 +0000 (02:17 -0700)]
netdevsim: set the carrier when the device goes up
Bringing a linked netdevsim device down and then up causes communication
failure because both interfaces lack carrier. Basically a ifdown/ifup on
the interface make the link broken.
Commit 3762ec05a9fbda ("netdevsim: add NAPI support") added supported
for NAPI, calling netif_carrier_off() in nsim_stop(). This patch
re-enables the carrier symmetrically on nsim_open(), in case the device
is linked and the peer is up.
projects / thirdparty / kernel / linux.git / log
