Based on the commit c9f4c695835c ("RDMA/rxe: Reverse the sense of
RXE_POOL_NO_ALLOC"), only the mr pool uses the RXE_POOL_ALLOC, As such,
replace this flags with pool type to save memory.
Yixing Liu [Fri, 29 Apr 2022 09:35:45 +0000 (17:35 +0800)]
RDMA/hns: Remove the num_cqc_timer variable
The bt number of cqc_timer of HIP09 increases compared with that of HIP08.
Therefore, cqc_timer_bt_num and num_cqc_timer do not match. As a result,
the driver may fail to allocate cqc_timer. So the driver needs to uniquely
uses cqc_timer_bt_num to represent the bt number of cqc_timer.
Fixes: 0e40dc2f70cd ("RDMA/hns: Add timer allocation support for hip08") Link: https://lore.kernel.org/r/20220429093545.58070-1-liangwenpeng@huawei.com Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Yangyang Li [Fri, 29 Apr 2022 09:31:04 +0000 (17:31 +0800)]
RDMA/hns: Add the detection for CMDQ status in the device initialization process
CMDQ may fail during HNS ROCEE initialization. The following is the log
when the execution fails:
hns3 0000:bd:00.2: In reset process RoCE client reinit.
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2 hns_2: failed to set gid, ret = -11!
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
<...>
hns3 0000:bd:00.2: CMDQ move tail from 840 to 839
hns3 0000:bd:00.2: CMDQ move tail from 840 to 0
hns3 0000:bd:00.2: [cmd]token 14e mailbox 20 timeout.
hns3 0000:bd:00.2 hns_2: set HEM step 0 failed!
hns3 0000:bd:00.2 hns_2: set HEM address to HW failed!
hns3 0000:bd:00.2 hns_2: failed to alloc mtpt, ret = -16.
infiniband hns_2: Couldn't create ib_mad PD
infiniband hns_2: Couldn't open port 1
hns3 0000:bd:00.2: Reset done, RoCE client reinit finished.
However, even if ib_mad client registration failed, ib_register_device()
still returns success to the driver.
In the device initialization process, CMDQ execution fails because HW/FW
is abnormal. Therefore, if CMDQ fails, the initialization function should
set CMDQ to a fatal error state and return a failure to the caller.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20220429093104.26687-1-liangwenpeng@huawei.com Signed-off-by: Yangyang Li <liyangyang20@huawei.com> Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Bob Pearson [Wed, 20 Apr 2022 17:23:17 +0000 (12:23 -0500)]
RDMA/rxe: Replace paylen by payload
In finish_packet() in rxe_req.c a variable was incorrectly called paylen
instead of payload. Elsewhere in the rxe source payload is always used for
the RoCE payload length and paylen is always used for the UDP payload
length. This will cause unnecessary confusion.
RDMA/mlx5: Move creation and free of translation tables to umr.c
The only use of the translation tables is to update the mkey translation
by a UMR operation. Move the responsibility of creating and freeing them
to umr.c
Introduce mlx5_umr_post_send_wait() that uses a UMR adjusted flow for
posting WQEs. The next patches will gradually move UMR operations to use
this flow. Once done, will get rid of mlx5_ib_post_send_wait().
mlx5_umr_post_send_wait gets already written WQE segments and will only
memcpy it to the SQ. This way, we avoid packing all the data in a WR just
to unpack it into the WQE.
Instead of getting the update access capabilities each call to
get_umr_update_access_mask(), pass struct mlx5_ib_dev and get the
capabilities inside the function.
Leon Romanovsky [Wed, 13 Apr 2022 09:33:39 +0000 (12:33 +0300)]
RDMA/mlx5: Fix flow steering egress flow
The commit mentioned in Fixes line removed the function that was
called to check validity of esp_aes_gcm attribute. Sadly, that
is_valid_esp_aes_gcm() returned success even for specs without
esp_aes_gcm at all.
So the right fix will be to remove whole if () and such fix
the following error observed in smatch too.
drivers/infiniband/hw/mlx5/fs.c:1126 _create_flow_rule()
warn: duplicate check 'is_egress' (previous on line 1098)
Xiao Yang [Sun, 10 Apr 2022 11:35:13 +0000 (19:35 +0800)]
RDMA/rxe: Generate a completion for unsupported/invalid opcode
Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".
Jason Gunthorpe [Tue, 12 Apr 2022 13:43:36 +0000 (10:43 -0300)]
Merge branch 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
Mellanox shared branch that includes:
* Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com
Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code,
clean build config options and delete useless kTLS vs. TLS separation.
* Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com
Together with FPGA TLS, the IPsec went to EOL state in the November of
2019 [1]. Exactly like FPGA TLS, no active customers exist for this
upstream code and all the complexity around that area can be deleted.
* Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de
====================
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Remove not-implemented IPsec capabilities
net/mlx5: Remove ipsec_ops function table
net/mlx5: Reduce kconfig complexity while building crypto support
net/mlx5: Move IPsec file to relevant directory
net/mlx5: Remove not-needed IPsec config
net/mlx5: Align flow steering allocation namespace to common style
net/mlx5: Unify device IPsec capabilities check
net/mlx5: Remove useless IPsec device checks
net/mlx5: Remove ipsec vs. ipsec offload file separation
RDMA/core: Delete IPsec flow action logic from the core
RDMA/mlx5: Drop crypto flow steering API
RDMA/mlx5: Delete never supported IPsec flow action
net/mlx5: Remove FPGA ipsec specific statistics
net/mlx5: Remove XFRM no_trailer flag
net/mlx5: Remove not-used IDA field from IPsec struct
net/mlx5: Delete metadata handling logic
net/mlx5_fpga: Drop INNOVA IPsec support
IB/mlx5: Fix undefined behavior due to shift overflowing the constant
net/mlx5: Cleanup kTLS function names and their exposure
net/mlx5: Remove tls vs. ktls separation as it is the same
net/mlx5: Remove indirection in TLS build
net/mlx5: Reliably return TLS device capabilities
net/mlx5_fpga: Drop INNOVA TLS support
Leon Romanovsky [Wed, 6 Apr 2022 08:25:51 +0000 (11:25 +0300)]
net/mlx5: Remove ipsec_ops function table
There is only one IPsec implementation and ipsec_ops is not needed
at all in this situation. Together with removal of ipsec_ops, we can
drop the entry checks as these functions are called for IPsec devices
only.
Leon Romanovsky [Wed, 6 Apr 2022 08:25:50 +0000 (11:25 +0300)]
net/mlx5: Reduce kconfig complexity while building crypto support
Both IPsec and kTLS need two functions declared in the lib/crypto.c
file. These functions are advertised through general mlx5.h file and
don't have any protection from attempts to call them without proper
config option.
Instead of creating stubs just for two functions, simply build that *.c
file as part of regular mlx5_eth build and rely on compiler to throw
them away if no callers exist in produced code.
Leon Romanovsky [Wed, 6 Apr 2022 08:25:47 +0000 (11:25 +0300)]
net/mlx5: Align flow steering allocation namespace to common style
Flow steering is a low level internal driver API, as such it relies on
the callers to check if namespace is supported and not rely on some
compilation flag.
Leon Romanovsky [Wed, 6 Apr 2022 08:25:45 +0000 (11:25 +0300)]
net/mlx5: Remove useless IPsec device checks
The mlx5_is_ipsec_device() check was to distinguish ConnectX device
related ops from FPGA, so post removing FPGA IPsec code this check
can be removed as no other device implements it.
It is safe to do it as there is already embedded check of IPsec device
in mlx5_accel_ipsec_device_caps().
Leon Romanovsky [Wed, 6 Apr 2022 08:25:44 +0000 (11:25 +0300)]
net/mlx5: Remove ipsec vs. ipsec offload file separation
The IPsec won't be initialized at all if device doesn't support IPsec
offload. It means that we can combine the ipsec.c and ipsec_offload.c
files to one file. Such change will allow us to remove ipsec_ops
indirection.
Leon Romanovsky [Wed, 6 Apr 2022 08:25:43 +0000 (11:25 +0300)]
RDMA/core: Delete IPsec flow action logic from the core
The removal of mlx5 flow steering logic, left the kernel without any RDMA
drivers that implements flow action callbacks supplied by RDMA/core. Any
user access to them caused to EOPNOTSUPP error, which can be achieved by
simply removing ioctl implementation.
Leon Romanovsky [Wed, 6 Apr 2022 08:25:42 +0000 (11:25 +0300)]
RDMA/mlx5: Drop crypto flow steering API
The mlx5 flow steering crypto API was intended to be used in FPGA
devices, which is not supported for years already. The removal of
mlx5 crypto FPGA code together with inability to configure encryption
keys makes the low steering API completely unusable.
So delete the code, so any ESP flow steering requests will fail with
not supported error, as it is happening now anyway as no device support
this type of API.
Leon Romanovsky [Wed, 6 Apr 2022 08:25:36 +0000 (11:25 +0300)]
net/mlx5_fpga: Drop INNOVA IPsec support
Mellanox INNOVA IPsec cards are EOL in Nov, 2019 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code.
Bob Pearson [Thu, 7 Apr 2022 21:04:45 +0000 (16:04 -0500)]
RDMA/rxe: Remove reliable datagram support
The rdma_rxe driver does not actually support the reliable datagram
transport but contains two references to RD opcodes in driver code. This
commit removes these references to RD transport opcodes which are never
used.
Bob Pearson [Thu, 7 Apr 2022 18:54:17 +0000 (13:54 -0500)]
RDMA/rxe: Remove support for SMI QPs from rdma_rxe
Currently the rdma_rxe driver supports SMI type QPs in a few places which
is incorrect. RoCE devices never should support SMI QPs. This commit
removes SMI QP support from the driver.
Robin Murphy [Tue, 5 Apr 2022 14:35:59 +0000 (15:35 +0100)]
RDMA/usnic: Refactor usnic_uiom_alloc_pd()
Rather than hard-coding pci_bus_type, pass the PF device through to
usnic_uiom_alloc_pd() and retrieve its bus there. This prepares for
iommu_domain_alloc() changing to take a device rather than a bus_type.
Robin Murphy [Tue, 5 Apr 2022 12:19:59 +0000 (13:19 +0100)]
RDMA/usnic: Stop using iommu_present()
Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device(s)
we care about. Replace iommu_present() with a more appropriate check at
probe time, and garbage-collect the resulting empty init function.
Jakob Koschel [Thu, 31 Mar 2022 09:16:34 +0000 (11:16 +0200)]
IB/SA: Replace usage of found with dedicated list iterator variable
To move the list iterator variable into the list_for_each_entry_*() macro
in the future it should be avoided to use the list iterator variable after
the loop body.
To *never* use the list iterator variable after the loop it was concluded
to use a separate iterator variable instead of a found boolean.
This removes the need to use a found variable and simply checking if the
variable was set, can determine if the break/goto was hit.
Jason Gunthorpe [Mon, 4 Apr 2022 15:26:42 +0000 (12:26 -0300)]
RDMA: Split kernel-only global device caps from uverbs device caps
Split out flags from ib_device::device_cap_flags that are only used
internally to the kernel into kernel_cap_flags that is not part of the
uapi. This limits the device_cap_flags to being the same bitmap that will
be copied to userspace.
This cleanly splits out the uverbs flags from the kernel flags to avoid
confusion in the flags bitmap.
Add some short comments describing which each of the kernel flags is
connected to. Remove unused kernel flags.
IB/mlx5: Fix undefined behavior due to shift overflowing the constant
Fix:
drivers/infiniband/hw/mlx5/main.c: In function ‘translate_eth_legacy_proto_oper’:
drivers/infiniband/hw/mlx5/main.c:370:2: error: case label does not reduce to an integer constant
case MLX5E_PROT_MASK(MLX5E_50GBASE_KR2):
^~~~
See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory
details as to why it triggers with older gccs only.
Leon Romanovsky [Mon, 4 Apr 2022 12:08:19 +0000 (15:08 +0300)]
net/mlx5: Cleanup kTLS function names and their exposure
The _accel_ part of the function is not relevant anymore, so rename kTLS
functions to be without it, together with header cleanup to do not have
declarations that are not used.
Leon Romanovsky [Mon, 4 Apr 2022 12:08:17 +0000 (15:08 +0300)]
net/mlx5: Remove indirection in TLS build
The dream described in the commit 1ae173228489 ("net/mlx5: Accel, Add TLS
tx offload interface") never came true, even an opposite happened when FPGA
TLS support was dropped. Such removal revealed the problematic flow in the
build process: build of unrelated files in case of TLS or IPsec are enabled.
In both cases, the MLX5_ACCEL is enabled, which built both TLS and IPsec.
As a solution, simply merge MLX5_TLS and MLX5_EN_TLS options and move TLS
related files to the eth part of the mlx5_core.
Leon Romanovsky [Mon, 4 Apr 2022 12:08:16 +0000 (15:08 +0300)]
net/mlx5: Reliably return TLS device capabilities
The capabilities returned from the FW are independent to the compiled
kernel and traditionally rely on the relevant CAPs bit only.
The mlx5_accel_is_ktls_*() functions are compiled out if CONFIG_MLX5_TLS
is not set, which "hides" from the user the information that TLS can be
enabled on this device.
Leon Romanovsky [Mon, 4 Apr 2022 12:08:15 +0000 (15:08 +0300)]
net/mlx5_fpga: Drop INNOVA TLS support
Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
is unmaintained, untested and not in-use by any upstream/distro oriented
customers. In order to reduce code complexity, drop the kernel code.
Niels Dossche [Mon, 28 Feb 2022 19:51:44 +0000 (20:51 +0100)]
IB/rdmavt: add missing locks in rvt_ruc_loopback
The documentation of the function rvt_error_qp says both r_lock and
s_lock need to be held when calling that function.
It also asserts using lockdep that both of those locks are held.
rvt_error_qp is called form rvt_send_cq, which is called from
rvt_qp_complete_swqe, which is called from rvt_send_complete, which is
called from rvt_ruc_loopback in two places. Both of these places do not
hold r_lock. Fix this by acquiring a spin_lock of r_lock in both of
these places.
The r_lock acquiring cannot be added in rvt_qp_complete_swqe because
some of its other callers already have r_lock acquired.
Xiao Yang [Thu, 31 Mar 2022 03:24:19 +0000 (11:24 +0800)]
IB/uverbs: Move part of enum ib_device_cap_flags to uapi
1) Part of enum ib_device_cap_flags are used by ibv_query_device(3)
or ibv_query_device_ex(3), so we define them in
include/uapi/rdma/ib_user_verbs.h and only expose them to userspace.
2) Reformat enum ib_device_cap_flags by removing the indent before '='.
Merge tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
- Rename the staging files to give them some meaning. Just
stage1,stag2,etc, does not show what they are for
- Check for NULL from allocation in bootconfig
- Hold event mutex for dyn_event call in user events
- Mark user events to broken (to work on the API)
- Remove eBPF updates from user events
- Remove user events from uapi header to keep it from being installed.
- Move ftrace_graph_is_dead() into inline as it is called from hot
paths and also convert it into a static branch.
* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Move user_events.h temporarily out of include/uapi
ftrace: Make ftrace_graph_is_dead() a static branch
tracing: Set user_events to BROKEN
tracing/user_events: Remove eBPF interfaces
tracing/user_events: Hold event_mutex during dyn_event_add
proc: bootconfig: Add null pointer check
tracing: Rename the staging files for trace_events
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"A single revert to fix a boot regression seen when clk_put() started
dropping rate range requests. It's best to keep various systems
booting so we'll kick this out and try again next time"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: Drop the rate range on clk_put()"
Merge tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes and updates:
- Make the prctl() for enabling dynamic XSTATE components correct so
it adds the newly requested feature to the permission bitmap
instead of overwriting it. Add a selftest which validates that.
- Unroll string MMIO for encrypted SEV guests as the hypervisor
cannot emulate it.
- Handle supervisor states correctly in the FPU/XSTATE code so it
takes the feature set of the fpstate buffer into account. The
feature sets can differ between host and guest buffers. Guest
buffers do not contain supervisor states. So far this was not an
issue, but with enabling PASID it needs to be handled in the buffer
offset calculation and in the permission bitmaps.
- Avoid a gazillion of repeated CPUID invocations in by caching the
values early in the FPU/XSTATE code.
- Enable CONFIG_WERROR in x86 defconfig.
- Make the X86 defconfigs more useful by adapting them to Y2022
reality"
* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Consolidate size calculations
x86/fpu/xstate: Handle supervisor states in XSTATE permissions
x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
x86/fpu: Cache xfeature flags from CPUID
x86/fpu/xsave: Initialize offset/size cache early
x86/fpu: Remove unused supervisor only offsets
x86/fpu: Remove redundant XCOMP_BV initialization
x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
x86/config: Make the x86 defconfigs a bit more usable
x86/defconfig: Enable WERROR
selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
Merge tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RT signal fix from Thomas Gleixner:
"Revert the RT related signal changes. They need to be reworked and
generalized"
* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- fix a regression in dma remap handling vs AMD memory encryption (me)
- finally kill off the legacy PCI DMA API (Christophe JAILLET)
* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: move pgprot_decrypted out of dma_pgprot
PCI/doc: cleanup references to the legacy PCI DMA API
PCI: Remove the deprecated "pci-dma-compat.h" API
Stephen Boyd [Sun, 3 Apr 2022 02:28:18 +0000 (19:28 -0700)]
Revert "clk: Drop the rate range on clk_put()"
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are
multiple reports that this breaks boot on various systems. The common
theme is that orphan clks are having rates set on them when that isn't
expected. Let's revert it out for now so that -rc1 boots.
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Avoid SEGV if core.cpus isn't set in 'perf stat'.
- Stop depending on .git files for building PERF-VERSION-FILE, used in
'perf --version', fixing some perf tools build scenarios.
- Convert tracepoint.py example to python3.
- Update UAPI header copies from the kernel sources: socket,
mman-common, msr-index, KVM, i915 and cpufeatures.
- Update copy of libbpf's hashmap.c.
- Directly return instead of using local ret variable in
evlist__create_syswide_maps(), found by coccinelle.
* tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Convert tracepoint.py example to python3
perf evlist: Directly return instead of using local ret variable
perf cpumap: More cpu map reuse by merge.
perf cpumap: Add is_subset function
perf evlist: Rename cpus to user_requested_cpus
perf tools: Stop depending on .git files for building PERF-VERSION-FILE
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync asm-generic/mman-common.h with the kernel
perf beauty: Update copy of linux/socket.h with the kernel sources
perf tools: Update copy of libbpf's hashmap.c
perf stat: Avoid SEGV if core.cpus isn't set
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix empty $(PYTHON) expansion.
- Fix UML, which got broken by the attempt to suppress Clang warnings.
- Fix warning message in modpost.
* tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: restore the warning message for missing symbol versions
Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS"
kbuild: Remove '-mno-global-merge'
kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh
kconfig: remove stale comment about removed kconfig_print_symbol()
Merge tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- build fix for gpio
- fix crc32 build problems
- check for failed memory allocations
* tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: crypto: Fix CRC32 code
MIPS: rb532: move GPIOD definition into C-files
MIPS: lantiq: check the return value of kzalloc()
mips: sgi-ip22: add a check for the return of kzalloc()
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
- Documentation improvements
- Prevent module exit until all VMs are freed
- PMU Virtualization fixes
- Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences
- Other miscellaneous bugfixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: fix sending PV IPI
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
KVM: x86: Remove redundant vm_entry_controls_clearbit() call
KVM: x86: cleanup enter_rmode()
KVM: x86: SVM: fix tsc scaling when the host doesn't support it
kvm: x86: SVM: remove unused defines
KVM: x86: SVM: move tsc ratio definitions to svm.h
KVM: x86: SVM: fix avic spec based definitions again
KVM: MIPS: remove reference to trap&emulate virtualization
KVM: x86: document limitations of MSR filtering
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
KVM: x86/emulator: Emulate RDPID only if it is enabled in guest
KVM: x86/pmu: Fix and isolate TSX-specific performance event logic
KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set
KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs
KVM: x86: Trace all APICv inhibit changes and capture overall status
KVM: x86: Add wrappers for setting/clearing APICv inhibits
KVM: x86: Make APICv inhibit reasons an enum and cleanup naming
KVM: X86: Handle implicit supervisor access with SMAP
KVM: X86: Rename variable smap to not_smap in permission_fault()
...
Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block
Pull block driver fix from Jens Axboe:
"Got two reports on nbd spewing warnings on load now, which is a
regression from a commit that went into your tree yesterday.
Revert the problematic change for now"
* tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block:
Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
Merge tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Check for EC device - Fix a crash when using the cros_ec_typec
driver on older hardware not capable of typec commands
- Make try power role optional
- Mux configuration reorganization series from Prashant
cros_ec_debugfs:
- Fix use after free. Thanks Tzung-bi
sensorhub:
- cros_ec_sensorhub fixup - Split trace include file
misc:
- Add new mailing list for chrome-platform development:
chrome-platform@lists.linux.dev
Now with patchwork!"
* tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_debugfs: detach log reader wq from devm
platform: chrome: Split trace include file
platform/chrome: cros_ec_typec: Update mux flags during partner removal
platform/chrome: cros_ec_typec: Configure muxes at start of port update
platform/chrome: cros_ec_typec: Get mux state inside configure_mux
platform/chrome: cros_ec_typec: Move mux flag checks
platform/chrome: cros_ec_typec: Check for EC device
platform/chrome: cros_ec_typec: Make try power role optional
MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
After being merged, user_events become more visible to a wider audience
that have concerns with the current API.
It is too late to fix this for this release, but instead of a full
revert, just mark it as BROKEN (which prevents it from being selected in
make config). Then we can work finding a better API. If that fails,
then it will need to be completely reverted.
To not have the code silently bitrot, still allow building it with
COMPILE_TEST.
And to prevent the uapi header from being installed, then later changed,
and then have an old distro user space see the old version, move the
header file out of the uapi directory.
Surround the include with CONFIG_COMPILE_TEST to the current location,
but when the BROKEN tag is taken off, it will use the uapi directory,
and fail to compile. This is a good way to remind us to move the header
back.
tracing: Move user_events.h temporarily out of include/uapi
While user_events API is under development and has been marked for broken
to not let the API become fixed, move the header file out of the uapi
directory. This is to prevent it from being installed, then later changed,
and then have an old distro user space update with a new kernel, where
applications see the user_events being available, but the old header is in
place, and then they get compiled incorrectly.
Also, surround the include with CONFIG_COMPILE_TEST to the current
location, but when the BROKEN tag is taken off, it will use the uapi
directory, and fail to compile. This is a good way to remind us to move
the header back.
Christophe Leroy [Wed, 30 Mar 2022 07:00:19 +0000 (09:00 +0200)]
ftrace: Make ftrace_graph_is_dead() a static branch
ftrace_graph_is_dead() is used on hot paths, it just reads a variable
in memory and is not worth suffering function call constraints.
For instance, at entry of prepare_ftrace_return(), inlining it avoids
saving prepare_ftrace_return() parameters to stack and restoring them
after calling ftrace_graph_is_dead().
While at it using a static branch is even more performant and is
rather well adapted considering that the returned value will almost
never change.
Inline ftrace_graph_is_dead() and replace 'kill_ftrace_graph' bool
by a static branch.
After being merged, user_events become more visible to a wider audience
that have concerns with the current API. It is too late to fix this for
this release, but instead of a full revert, just mark it as BROKEN (which
prevents it from being selected in make config). Then we can work finding
a better API. If that fails, then it will need to be completely reverted.
tracing: Rename the staging files for trace_events
When looking for implementation of different phases of the creation of the
TRACE_EVENT() macro, it is pretty useless when all helper macro
redefinitions are in files labeled "stageX_defines.h". Rename them to
state which phase the files are for. For instance, when looking for the
defines that are used to create the event fields, seeing
"stage4_event_fields.h" gives the developer a good idea that the defines
are in that file.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Li RongQing [Wed, 9 Mar 2022 08:35:44 +0000 (16:35 +0800)]
KVM: x86: fix sending PV IPI
If apic_id is less than min, and (max - apic_id) is greater than
KVM_IPI_CLUSTER_SIZE, then the third check condition is satisfied but
the new apic_id does not fit the bitmask. In this case __send_ipi_mask
should send the IPI.
This is mostly theoretical, but it can happen if the apic_ids on three
iterations of the loop are for example 1, KVM_IPI_CLUSTER_SIZE, 0.
Fixes: aaffcfd1e82 ("KVM: X86: Implement PV IPIs in linux guest") Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <1646814944-51801-1-git-send-email-lirongqing@baidu.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 29 Mar 2022 16:56:24 +0000 (12:56 -0400)]
KVM: x86/mmu: do compare-and-exchange of gPTE via the user address
FNAME(cmpxchg_gpte) is an inefficient mess. It is at least decent if it
can go through get_user_pages_fast(), but if it cannot then it tries to
use memremap(); that is not just terribly slow, it is also wrong because
it assumes that the VM_PFNMAP VMA is contiguous.
The right way to do it would be to do the same thing as
hva_to_pfn_remapped() does since commit add6a0cd1c5b ("KVM: MMU: try to
fix up page faults before giving up", 2016-07-05), using follow_pte()
and fixup_user_fault() to determine the correct address to use for
memremap(). To do this, one could for example extract hva_to_pfn()
for use outside virt/kvm/kvm_main.c. But really there is no reason to
do that either, because there is already a perfectly valid address to
do the cmpxchg() on, only it is a userspace address. That means doing
user_access_begin()/user_access_end() and writing the code in assembly
to handle exceptions correctly. Worse, the guest PTE can be 8-byte
even on i686 so there is the extra complication of using cmpxchg8b to
account for. But at least it is an efficient mess.
(Thanks to Linus for suggesting improvement on the inline assembly).
Reported-by: Qiuhao Li <qiuhao@sysec.org> Reported-by: Gaoning Pan <pgn@zju.edu.cn> Reported-by: Yongkang Jia <kangel@zju.edu.cn> Reported-by: syzbot+6cde2282daa792c49ab8@syzkaller.appspotmail.com Debugged-by: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Maxim Levitsky <mlevitsk@redhat.com> Cc: stable@vger.kernel.org Fixes: bd53cb35a3e9 ("X86/KVM: Handle PFNs outside of kernel reach when touching GPTEs") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When emulating exit from long mode, EFER_LMA is cleared with
vmx_set_efer(). This will already unset the VM_ENTRY_IA32E_MODE control
bit as requested by SDM, so there is no need to unset VM_ENTRY_IA32E_MODE
again in exit_lmode() explicitly. In case EFER isn't supported by
hardware, long mode isn't supported, so exit_lmode() cannot be reached.
Note that, thanks to the shadow controls mechanism, this change doesn't
eliminate vmread or vmwrite.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-3-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zhenzhong Duan [Fri, 11 Mar 2022 10:26:42 +0000 (18:26 +0800)]
KVM: x86: cleanup enter_rmode()
vmx_set_efer() sets uret->data but, in fact if the value of uret->data
will be used vmx_setup_uret_msrs() will have rewritten it with the value
returned by update_transition_efer(). uret->data is consumed if and only
if uret->load_into_hardware is true, and vmx_setup_uret_msrs() takes care
of (a) updating uret->data before setting uret->load_into_hardware to true
(b) setting uret->load_into_hardware to false if uret->data isn't updated.
Opportunistically use "vmx" directly instead of redoing to_vmx().
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Message-Id: <20220311102643.807507-2-zhenzhong.duan@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Sun, 13 Mar 2022 14:05:22 +0000 (15:05 +0100)]
KVM: MIPS: remove reference to trap&emulate virtualization
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220313140522.1307751-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 15 Mar 2022 22:17:15 +0000 (18:17 -0400)]
KVM: x86: document limitations of MSR filtering
MSR filtering requires an exit to userspace that is hard to implement and
would be very slow in the case of nested VMX vmexit and vmentry MSR
accesses. Document the limitation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hou Wenlong [Mon, 7 Mar 2022 12:26:33 +0000 (20:26 +0800)]
KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr
If MSR access is rejected by MSR filtering,
kvm_set_msr()/kvm_get_msr() would return KVM_MSR_RET_FILTERED,
and the return value is only handled well for rdmsr/wrmsr.
However, some instruction emulation and state transition also
use kvm_set_msr()/kvm_get_msr() to do msr access but may trigger
some unexpected results if MSR access is rejected, E.g. RDPID
emulation would inject a #UD but RDPID wouldn't cause a exit
when RDPID is supported in hardware and ENABLE_RDTSCP is set.
And it would also cause failure when load MSR at nested entry/exit.
Since msr filtering is based on MSR bitmap, it is better to only
do MSR filtering for rdmsr/wrmsr.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <2b2774154f7532c96a6f04d71c82a8bec7d9e80b.1646655860.git.houwenlong.hwl@antgroup.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / thirdparty / kernel / stable.git / log
