Richard Mudgett [Tue, 12 Jun 2018 19:09:54 +0000 (14:09 -0500)]
channel.c: Fix usage of CHECK_BLOCKING()
The CHECK_BLOCKING() macro is used to indicate if a channel's handling
thread is about to do a blocking operation (poll, read, or write) of
media. A few operations such as ast_queue_frame(), soft hangup, and
masquerades use the indication to wake up the blocked thread to reevaluate
what is going on.
Richard Mudgett [Mon, 18 Jun 2018 23:04:54 +0000 (18:04 -0500)]
autoservice: Don't start channel autoservice if the thread is a user interface.
Executing dialplan functions from either AMI or ARI by getting a variable
could place the channel into autoservice. However, these user interface
threads do not handle the channel's media so we wind up with two threads
attempting to handle the media.
There can be one and only one thread handling a channel's media at a time.
Otherwise, we don't know which thread is going to handle the media frames.
Sam Wierema [Tue, 12 Jun 2018 14:30:37 +0000 (16:30 +0200)]
app_mp3: remove 10 seconds of silence after mp3 playback
This patch changes the way asterisk polls output from mpg123, instead
of waiting for 10 seconds(when playing an http url) it now uses a
timeout of one second and iterates 10 times using this same timeout.
The main difference is that for every timeout asterisk receives it now
checks if mpg123 is still running before poll again.
ktyerman [Tue, 5 Jun 2018 01:31:39 +0000 (11:31 +1000)]
chan_iax2: better handling for timeout and EINTR
The iax2 module is not handling timeout and EINTR case properly. Mainly when
there is an interupt to the kernel thread. In case of ast_io_wait recieves a
signal, or timeout it can be an error or return 0 which eventually escapes the
thread loop, so that it cant recieve any data. This then causes the modules
receive queue to build up on the kernel and stop any communications via iax in
asterisk.
The proposed patch is for the iax module, so that timeout and EINTR does not
exit the thread.
Alexander Traud [Wed, 13 Jun 2018 10:14:18 +0000 (12:14 +0200)]
res_rtp_asterisk: Instead of ./configure use OPENSSL_NO_SRTP.
Previously, Asterisk used its script ./configure, to test whether OpenSSL was
built with no-srtp (or was simply too old). However, the header file
<openssl/opensslconf.h> is the preferred way to detect the local configuration
of OpenSSL.
As a positive side-effect the script ./configure does not interleave the
detection of the Open Settlement Protocol Toolkit (OSPTK) with the detection of
individual features of OpenSSL anymore.
Richard Mudgett [Mon, 30 Apr 2018 22:38:58 +0000 (17:38 -0500)]
AST-2018-008: Fix enumeration of endpoints from ACL rejected addresses.
When endpoint specific ACL rules block a SIP request they respond with a
403 forbidden. However, if an endpoint is not identified then a 401
unauthorized response is sent. This vulnerability just discloses which
requests hit a defined endpoint. The ACL rules cannot be bypassed to gain
access to the disclosed endpoints.
* Made endpoint specific ACL rules now respond with a 401 unauthorized
which is the same as if an endpoint were not identified. The fix is
accomplished by replacing the found endpoint with the artificial endpoint
which always fails authentication.
Alexander Traud [Fri, 8 Jun 2018 20:09:00 +0000 (22:09 +0200)]
res_rtp_asterisk: Allow OpenSSL configured with no-deprecated.
Furthermore, allow OpenSSL configured with no-dh. Additionally, this change
allows auto-negotiation of the elliptic curve/group for servers, not only with
OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer. This enables X25519
(since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a side-effect.
Alexei Gradinari [Thu, 31 May 2018 15:25:40 +0000 (11:25 -0400)]
func_odbc: NODATA if SQLNumResultCols returned 0 columns on readsql
The functions acf_odbc_read/cli_odbc_read ignore a number of columns
returned by the SQLNumResultCols.
If the number of columns is zero it means no data.
In this case, a SQLFetch function has to be not called,
because it will cause an error.
George Joseph [Thu, 7 Jun 2018 13:46:03 +0000 (07:46 -0600)]
chan_pjsip: Register for "BEFORE_MEDIA" responses
chan_pjsip wasn't registering for "BEFORE_MEDIA" responses which meant
it was not updating HANGUPCAUSE for 4XX responses. If the remote end
sent a "180 Ringing", then a "486 Busy", the hangup cause was left at
"180 Normal Clearing".
* Removed chan_pjsip_incoming_response from the original session
supplement (which was handling only "AFTER MEDIA") and added it to a
new session supplement which accepts both "BEFORE_MEDIA" and
"AFTER_MEDIA".
* Also cleaned up some cleanup code in load module.
George Joseph [Mon, 4 Jun 2018 14:50:51 +0000 (08:50 -0600)]
app_sendtext: Allow content types other than text/plain
There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Pirmin Walthert [Wed, 30 May 2018 06:12:30 +0000 (08:12 +0200)]
bridge_channel.c: Fix Deadlock when using Local channels and fax gateway
ast_indicate is invoked with the bridge locked. As ast_indicate locks the
other end of the bridge as well this can lead to a deadlock in some situations.
(Especially when a different thread does the same in the reverse order).
This patch calls ast_indicate after unlocking the bridge which fixes the
deadlock. Calling ast_indicate with these parameters without locking the
bridge should be safe as this is done at different places without a
bridge lock.
ASTERISK-27094 #close Reported-by: David Brillert
Change-Id: I5f86c1e2ce75b9929a36ab589b18c450e62ea35f
William McCall [Tue, 29 May 2018 00:17:52 +0000 (00:17 +0000)]
app_confbridge: Add talking indicator for ConfBridgeList AMI response
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
Richard Mudgett [Tue, 29 May 2018 17:28:48 +0000 (12:28 -0500)]
app_meetme: Fix manager event documentation for several events.
The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
MeetmeTalkRequest AMI events were documented with sending out a Usernum
header when the User header was actually output.
* Change the online documentation to match reality.
Alexander Traud [Mon, 28 May 2018 15:32:15 +0000 (17:32 +0200)]
tcptls.h: Repair ./configure --with-ssl=PATH.
asterisk/tcptls.h was included (explicitly, implicitly, or transitively). Those
inclusions got replaced by forward declarations. As side effect, the inclusions
got completed.
Alexei Gradinari [Tue, 22 May 2018 21:21:10 +0000 (17:21 -0400)]
pjsip_options: handle modification of qualify options in realtime
Currentrly pjsip_options code does not handle the situation when the
qualify options were changed in realtime database.
Only 'module reload res_pjsip' helps.
This patch add a check on contact add/update observers if the contact
qualify options are different than local aor qualify options.
If the qualify options were modified then synchronize
the pjsip_options AOR local state.
Alexander Traud [Fri, 25 May 2018 14:55:26 +0000 (16:55 +0200)]
tcptls: Allow OpenSSL configured with no-dh.
Additionally, this change allows auto-negotiation of the elliptic curve/group
for servers, not only with OpenSSL 1.0.2 but also with OpenSSL 1.1.0 and newer.
This enables X25519 (since OpenSSL 1.1.0) and X448 (since OpenSSL 1.1.1) as a
side-effect.
Torrey Searle [Wed, 9 May 2018 13:31:47 +0000 (15:31 +0200)]
res/res_rtp_asterisk: ensure marker bit is correctly set on ssrc change
Certain race conditions between changing bridge types and DTMF can
cause the current FLAG_NEED_MARKER_BIT to send the marker bit before
the actual first packet of native bridging.
This logic keeps track of the ssrc the bridge is currently sending
and will correctly ensure the marker bit is set if SSRC as changed
from the previous sent packet.
Alexei Gradinari [Wed, 23 May 2018 21:20:39 +0000 (17:20 -0400)]
pjsip_options: show/reload AOR qualify options using CLI
Currentrly pjsip_options code does not handle the situation when the
AOR qualify options were changed.
Also there is no way to find out what qualify options are using.
This patch add CLI commands to show and synchronize Aor qualify options:
pjsip show qualify endpoint <id>
Show the current qualify options for all Aors on the PJSIP endpoint.
pjsip show qualify aor <id>
Show the PJSIP Aor current qualify options.
pjsip reload qualify endpoint <id>
Synchronize the qualify options for all Aors on the PJSIP endpoint.
pjsip reload qualify aor <id>
Synchronize the PJSIP Aor qualify options.
Richard Mudgett [Tue, 22 May 2018 22:17:31 +0000 (17:17 -0500)]
channel.c: Fix off nominal channel allocation failure path.
__ast_channel_alloc_ap() had a failure exit path that hadn't setup the fd
descriptors to -1 yet. The destructor would then attempt to close these
fd's that had never been opened.
Alexei Gradinari [Fri, 18 May 2018 21:45:22 +0000 (17:45 -0400)]
config.c: Fix successful DELETE treated as failure
The config engine destroy_func callback function returns the number of
rows deleted or -1 on error. But the function
ast_destroy_realtime_fields treated non-zero return values as error.
Nic Colledge [Sat, 12 May 2018 11:53:13 +0000 (12:53 +0100)]
app_voicemail: Fix incorrect msg leaving/retrieving an ODBC voicemail
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
Brian P. Martin [Wed, 18 Apr 2018 02:15:08 +0000 (19:15 -0700)]
chan_mobile: support handling of caller-id names ("cnam").
Add support to handle caller-ID names ("cnam") in addition to caller-ID
numbers. The prior code ignored the caller-ID name altogether, and
used the local name for the cell phone (e.g. "my-iphone") in its place.
Note: as of this writing, at least some Android phones don't pass cnam to
us. This can be seen by issuing "core set debug 2" in the CLI and watching
the "CLIP" record when a call comes in. If cnam isn't in the CLIP record,
there's nothing we can do to provide one. We'll provide a null cnam field,
so later Asterisk processes know to try other sources (e.g. cidname database,
OpenCNAM, etc.).
Reported by: Brian Martin
Tested by: Brian Martin
ASTERISK-27726
Alexander Traud [Thu, 17 May 2018 06:58:43 +0000 (08:58 +0200)]
res_pjsip_endpoint_identifier_ip: Unregister the module for headers.
Asterisk uses Reference Counting to track whether a module can be unloaded.
Every consumer who requires a module, increases the reference count. When the
consumer goes, is unloaded itself, it has to decrease the reference count on
all its used/required modules. That way
core stop gracefully
works on the command-line interface (CLI): One module after the other is
unloaded. A recent change broke this for the module res_pjsip.
Alexander Traud [Thu, 17 May 2018 05:34:03 +0000 (07:34 +0200)]
res_pjsip: Register pjsip_transport_management not externally but internally.
The module (res_)pjsip_transport_management got moved into res_pjsip. It is no
longer an independent/external module with (un)load_module and therefore has to
register just internally with res_pjsip.
Alexander Traud [Fri, 11 May 2018 17:49:12 +0000 (19:49 +0200)]
rtp_engine: Remove the double assigned RTP payload ID of H.263+.
Mantis-3709 (Commit 68ff3c3, Asterisk 1.2) added support for the video format
H.263+. For this, the RTP payload ID 103 got assigned statically. Commit f1aadc8
assigned another payload ID 98 for this format in Asterisk 1.6.
res_hep: Adds hostname resolution support for capture_address
Previously, only an IP address would be accepted for the capture_address config
setting in hep.conf. This change allows capture_address to be a resolvable
hostname or an IP address.
ASTERISK-27796 #close Reported-By: Sebastian Gutierrez
Change-Id: I33e1a37a8b86e20505dadeda760b861a9ef51f6f
Jaco Kroon [Tue, 8 May 2018 09:59:02 +0000 (11:59 +0200)]
manager: fix digest auth for ami/http mechanism.
Due to a fixed size buffer the digest authentication could be
incorrectly calculated if a large URI was provided, causing
authentication failure. The buffer is now dynamically allocated to allow
any size URI within the normal limits of the HTTP request size.
Corey Farrell [Fri, 4 May 2018 18:47:25 +0000 (14:47 -0400)]
app_macro: Prevent infinite loop in find_matching_priority.
Use AST_PBX_MAX_STACK to escape if we recurse 128 times. This will
prevent crash if dialplan contains an include loop. Log an error when
this occurs, at most one message per call to Macro() so we avoid logger
spam.
Joshua Colp [Thu, 3 May 2018 11:34:32 +0000 (11:34 +0000)]
res_ari: Remove requirement that body exists when debug is on.
The "ari set debug" code for incoming requests incorrectly assumed
that all requests would contain a body. If one did not exist the
request would be incorrectly rejected. The response that was sent
was also incomplete as an incorrect function was used to construct
the response.
The code has now been changed to no longer require a request to have
a body and the response updated to use the correct function.
Joshua Colp [Mon, 11 Dec 2017 18:34:53 +0000 (18:34 +0000)]
pjsip: Rewrite OPTIONS support with new eyes.
The OPTIONS support in PJSIP has organically grown, like many things in
Asterisk. It has been tweaked, changed, and adapted based on situations
run into. Unfortunately this has taken its toll. Configuration file
based objects have poor performance and even dynamic ones aren't that
great.
This change scraps the existing code and starts fresh with new eyes. It
leverages all of the APIs made available such as sorcery observers and
serializers to provide a better implementation.
1. The state of contacts, AORs, and endpoints relevant to the qualify
process is maintained. This state can be updated by external forces (such
as a device registering/unregistering) and also the reload process. This
state also includes the association between endpoints and AORs.
2. AORs are scheduled and not contacts. This reduces the amount of work
spent juggling scheduled items.
3. Manipulation of which AORs are being qualified and the endpoint states
all occur within a serializer to reduce the conflict that can occur with
multiple threads attempting to modify things.
4. Operations regarding an AOR use a serializer specific to that AOR.
5. AORs and endpoint state act as state compositors. They take input
from lower level objects (contacts feed AORs, AORs feed endpoint state)
and determine if a sufficient enough change has occurred to be fed further
up the chain.
6. Realtime is supported by using observers to know when a contact has
been registered. If state does not exist for the associated AOR then it
is retrieved and becomes active as appropriate.
The end result of all of this is best shown with a configuration file of
3000 endpoints each with an AOR that has a static contact. In the old
code it would take over a minute to load and use all 8 of my cores. This
new code takes 2-3 seconds and barely touches the CPU even while dealing
with all of the OPTIONS requests.
projects / thirdparty / asterisk.git / log
