Linus Torvalds [Thu, 12 Feb 2026 01:20:38 +0000 (17:20 -0800)]
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
* tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm mpath: make pg_init_delay_msecs settable
Revert "dm: fix a race condition in retrieve_deps"
dm mpath: Add missing dm_put_device when failing to get scsi dh name
dm vdo encodings: clean up header and version functions
dm: use bio_clone_blkg_association
dm: fix excessive blk-crypto operations for invalid keys
dm-verity: fix section mismatch error
dm-unstripe: fix mapping bug when there are multiple targets in a table
dm-integrity: fix recalculation in bitmap mode
dm-bufio: avoid redundant buffer_tree lookups
dm-bufio: merge cache_put() into cache_put_and_wake()
selftests: add dm-verity keyring selftests
dm-verity: add dm-verity keyring
dm: clear cloned request bio pointer when last clone bio completes
dm-verity: fix up various workqueue-related comments
dm-verity: switch to bio_advance_iter_single()
dm-verity: consolidate the BH and normal work structs
dm: add WQ_PERCPU to alloc_workqueue users
dm-integrity: fix a typo in the code for write/discard race
dm: use READ_ONCE in dm_blk_report_zones
...
Linus Torvalds [Thu, 12 Feb 2026 00:36:08 +0000 (16:36 -0800)]
Merge tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
Linus Torvalds [Wed, 11 Feb 2026 23:57:08 +0000 (15:57 -0800)]
Merge tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
- extend Landlock to enforce restrictions on a whole process, similarly
to the seccomp's TSYNC flag
- refactor data structures to simplify code and improve performance
- add documentation to cover missing parts
* tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
mailmap: Add entry for Mickaël Salaün
landlock: Transpose the layer masks data structure
landlock: Add access_mask_subset() helper
selftests/landlock: Add filesystem access benchmark
landlock: Document audit blocker field format
landlock: Add errata documentation section
landlock: Add backwards compatibility for restrict flags
landlock: Refactor TCP socket type check
landlock: Minor reword of docs for TCP access rights
landlock: Document LANDLOCK_RESTRICT_SELF_TSYNC
selftests/landlock: Add LANDLOCK_RESTRICT_SELF_TSYNC tests
landlock: Multithreading support for landlock_restrict_self()
Linus Torvalds [Wed, 11 Feb 2026 23:53:00 +0000 (15:53 -0800)]
Merge tag 'integrity-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just two bug fixes: IMA's detecting scripts (bprm_creds_for_exec), and
calculating the EVM HMAC"
* tag 'integrity-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Use ordered xattrs list to calculate HMAC in evm_init_hmac()
ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec()
Linus Torvalds [Wed, 11 Feb 2026 23:47:37 +0000 (15:47 -0800)]
Merge tag 'Smack-for-7.0' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Two improvements to the code for setting the CIPSO Domain Of
Interpretation (DOI), a seldom used feature, and a formatting change"
* tag 'Smack-for-7.0' of https://github.com/cschaufler/smack-next:
smack: /smack/doi: accept previously used values
smack: /smack/doi must be > 0
security: smack: fix indentation in smack_access.c
Linus Torvalds [Wed, 11 Feb 2026 22:36:47 +0000 (14:36 -0800)]
Merge tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Check all mandatory callbacks when registering nbcon consoles
- Fix some compiler warnings
* tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: drop __printf() attributes on binary printing functions
printf: convert test_hashed into macro
printk: nbcon: Check for device_{lock,unlock} callbacks
Linus Torvalds [Wed, 11 Feb 2026 22:12:50 +0000 (14:12 -0800)]
Merge tag 'slab-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- The percpu sheaves caching layer was introduced as opt-in in 6.18 and
now we enable it for all caches and remove the previous cpu (partial)
slab caching mechanism.
Besides the lower locking overhead and much more likely fastpath when
freeing, this removes the rather complicated code related to the cpu
slab lockless fastpaths (using this_cpu_try_cmpxchg128/64) and all
its complications for PREEMPT_RT or kmalloc_nolock().
The lockless slab freelist+counters update operation using
try_cmpxchg128/64 remains and is crucial for freeing remote NUMA
objects, and to allow flushing objects from sheaves to slabs mostly
without the node list_lock (Vlastimil Babka)
- Eliminate slabobj_ext metadata overhead when possible. Instead of
using kmalloc() to allocate the array for memcg and/or allocation
profiling tag pointers, use leftover space in a slab or per-object
padding due to alignment (Harry Yoo)
- Various followup improvements to the above (Hao Li)
* tag 'slab-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (39 commits)
slub: let need_slab_obj_exts() return false if SLAB_NO_OBJ_EXT is set
mm/slab: only allow SLAB_OBJ_EXT_IN_OBJ for unmergeable caches
mm/slab: place slabobj_ext metadata in unused space within s->size
mm/slab: move [__]ksize and slab_ksize() to mm/slub.c
mm/slab: save memory by allocating slabobj_ext array from leftover
mm/memcontrol,alloc_tag: handle slabobj_ext access under KASAN poison
mm/slab: use stride to access slabobj_ext
mm/slab: abstract slabobj_ext access via new slab_obj_ext() helper
ext4: specify the free pointer offset for ext4_inode_cache
mm/slab: allow specifying free pointer offset when using constructor
mm/slab: use unsigned long for orig_size to ensure proper metadata align
slub: clarify object field layout comments
mm/slab: avoid allocating slabobj_ext array from its own slab
slub: avoid list_lock contention from __refill_objects_any()
mm/slub: cleanup and repurpose some stat items
mm/slub: remove DEACTIVATE_TO_* stat items
slab: remove frozen slab checks from __slab_free()
slab: update overview comments
slab: refill sheaves from all nodes
slab: remove unused PREEMPT_RT specific macros
...
Linus Torvalds [Wed, 11 Feb 2026 21:40:35 +0000 (13:40 -0800)]
Merge tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
Linus Torvalds [Wed, 11 Feb 2026 21:35:24 +0000 (13:35 -0800)]
Merge tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Move C example schedulers back from the external scx repo to
tools/sched_ext as the authoritative source. scx_userland and
scx_pair are returning while scx_sdt (BPF arena-based task data
management) is new. These schedulers will be dropped from the
external repo.
- Improve error reporting by adding scx_bpf_error() calls when DSQ
creation fails across all in-tree schedulers
- Avoid redundant irq_work_queue() calls in destroy_dsq() by only
queueing when llist_add() indicates an empty list
- Fix flaky init_enable_count selftest by properly synchronizing
pre-forked children using a pipe instead of sleep()
* tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Fix init_enable_count flakiness
tools/sched_ext: Fix data header access during free in scx_sdt
tools/sched_ext: Add error logging for dsq creation failures in remaining schedulers
tools/sched_ext: add arena based scheduler
tools/sched_ext: add scx_pair scheduler
tools/sched_ext: add scx_userland scheduler
sched_ext: Add error logging for dsq creation failures
sched_ext: Avoid multiple irq_work_queue() calls in destroy_dsq()
Linus Torvalds [Wed, 11 Feb 2026 21:20:50 +0000 (13:20 -0800)]
Merge tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
Linus Torvalds [Wed, 11 Feb 2026 21:13:32 +0000 (13:13 -0800)]
Merge tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Rework the rescuer to process work items one-by-one instead of
slurping all pending work items in a single pass.
As there is only one rescuer per workqueue, a single long-blocking
work item could cause high latency for all tasks queued behind it,
even after memory pressure is relieved and regular kworkers become
available to service them.
- Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and
workqueue.panic_on_stall_time parameter for time-based stall panic,
giving systems more control over workqueue stall handling.
- Replace BUG_ON() with panic() in the stall panic path for clearer
intent and more informative output.
* tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: replace BUG_ON with panic in panic_on_wq_watchdog
workqueue: add time-based panic for stalls
workqueue: add CONFIG_BOOTPARAM_WQ_STALL_PANIC option
workqueue: Process extra works in rescuer on memory pressure
workqueue: Process rescuer work items one-by-one using a cursor
workqueue: Make send_mayday() take a PWQ argument directly
Thomas Gleixner [Tue, 10 Feb 2026 16:20:51 +0000 (17:20 +0100)]
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu().
Fixes: 007d84287c74 ("sched/mmcid: Drop per CPU CID immediately when switching to per task mode") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/aYsZrixn9b6s_2zL@shinmob Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 11 Feb 2026 20:55:44 +0000 (12:55 -0800)]
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Linus Torvalds [Wed, 11 Feb 2026 20:20:25 +0000 (12:20 -0800)]
Merge tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
Linus Torvalds [Wed, 11 Feb 2026 19:43:00 +0000 (11:43 -0800)]
Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
Although 1394 OHCI specification does not impose any restriction on
the memory size dedicated to these DMA contexts, 1394 OHCI PCI driver
allocates pages for convenience when mapping them into either kernel
space or userspace VMA. The driver previously used dma_alloc_pages()
for both page allocation and mapping creation, even though this
kernel API is rarely used. Following discussions questioning the
page-oriented kernel API in the DMA layer, the driver has been
refactored to avoid using this API. In addition, the use of private
members in the allocated pages has been removed following
long-standing concern.
- Allocate variable-sized buffer for isochronous context header
1394 OHCI PCI driver previously allocated a single page for
isochronous context header. As a result, the buffer size for the
header was fixed to PAGE_SIZE, which imposed a limitation on IEC
61883-1/6 packet streaming engine. Consequently, the ALSA PCM devices
provided by drivers for audio and music units in IEEE 1394 bus were
constrained in the maximum size of buffer period (64 ms in most
cases). This limitation is resolved by dynamically allocating the
header buffer with an arbitrary size.
* tag 'firewire-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire: remove PCM buffer size constraint from isoc context header
firewire: core: add fw_iso_context_create() variant with header storage size
firewire: core: provide isoc header buffer size outside card driver
firewire: ohci: allocate isoc context header by kvmalloc()
firewire: core: add flags member for isochronous context structure
firewire: ohci: use cleanup helper for isoc context header allocation
firewire: ohci: code refactoring to use union for isoc multiple channel state
firewire: ohci: refactor isoc single-channel state using a union
firewire: core: add function variants for isochronous context creation
firewire: ohci: fix index of pages for dma address to 1394 OHCI IT context
firewire: ohci: stop using page private to store DMA mapping address
firewire: ohci: split page allocation from dma mapping
firewire: ohci: use MAX macro to guarantee minimum count of pages for AR contexts
firewire: core: stop using page private to store DMA mapping address
firewire: core: use common kernel API to allocate and release a batch of pages
firewire: core: code refactoring with cleanup function for isoc pages
firewire: core: use mutex instead of spinlock for client isochronous context
firewire: core: move private function declaration from public header to internal header
Linus Torvalds [Wed, 11 Feb 2026 19:28:10 +0000 (11:28 -0800)]
Merge tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- global switch of HID drivers to use pm_*ptr instead of #ifdef
CONFIG_PM* (Bastien Nocera)
- support for new firmware handling in intel-ish-hid (Vishnu Sankar)
- support for HID output reports in the Quicki2c in intel-thc (Even Xu)
- solidify register configuration updates in intel-thc (Even Xu)
- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)
- fn lock and WMI fan control handling improvements in certain Asus
models (ROG, ProArt P16) (Ionut Nechita, Connor Belli)
- fix for potential NULL pointer dereference during warm reset in
intel-ish-hid (Ryan Lin)
- fix for potential NULL pointer derefence in probe error paths in
hid-pl (Oliver Neukum)
- various other small assorted fixes and new device ID additions /
device-specific quirks
* tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: sony: add dongle device IDs for CRKD Gibson SG
HID: Intel-thc-hid: Intel-thc: Fix wrong register fields updating
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
HID: logitech-hidpp: Add support for Logitech K980
HID: logitech-dj: Differentiate "invalid device index" error
HID: sony: Use pm_ptr instead of #ifdef CONFIG_PM
HID: wacom: Use pm_ptr instead of #ifdef CONFIG_PM
HID: uclogic: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-sensor-hub: Use pm_ptr instead of #ifdef CONFIG_PM
HID: picolcd_core: Use pm_ptr instead of #ifdef CONFIG_PM
HID: nintendo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: logitech-dj: Use pm_ptr instead of #ifdef CONFIG_PM
HID: lenovo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: asus: Use pm_ptr instead of #ifdef CONFIG_PM
HID: appletb-kbd: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-alps: Use pm_ptr instead of #ifdef CONFIG_PM
HID: multitouch: add eGalaxTouch EXC3188 support
HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK
HID: sony: add support for bluetooth Rock Band 4 PS4 guitars
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
...
Linus Torvalds [Wed, 11 Feb 2026 19:00:19 +0000 (11:00 -0800)]
Merge tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
Linus Torvalds [Wed, 11 Feb 2026 18:53:39 +0000 (10:53 -0800)]
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
Linus Torvalds [Wed, 11 Feb 2026 18:45:11 +0000 (10:45 -0800)]
Merge tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and support for more models added to the existing
qcom-wcn driver as well as some minor tweaks and fixes.
New drivers:
- add the power sequencing driver for PCIe M.2 connectors
Driver improvements:
- use device_get_match_data() where applicable
- add support for the WCN39xx family of models to pwrseq-qcom-wcn
Fixes:
- fix a locking issue in pwrseq core
- fix retval check in pwrseq-qcom-wcn"
* tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix error path for VDDIO handling
power: sequencing: fix missing state_lock in pwrseq_power_on() error path
power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key M connector
power: sequencing: qcom-wcn: add support for WCN39xx
regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx
power: sequencing: qcom-wcn: use device_get_match_data()
Linus Torvalds [Wed, 11 Feb 2026 17:52:33 +0000 (09:52 -0800)]
Merge tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"There are a few patches adapting to changes in Rust land which seems
to be the norm since there is a pwm driver written in Rust. Other than
that just a few cleanups and a single fix for the tiehrpwm driver that
came in too late for making it into v6.19.
Thanks to Andy Shevchenko, Bartosz Golaszewski, Daniel Almeida and
Michal Wilczynski for reviews in this cycle, and to Alice Ryhl, Ben
Zong-You Xie, Gokul Praveen, Kari Argillander, Markus Probst, Raag
Jadav, Shankari Anand, Tamir Duberstein and Vladimir Zapolskiy for
code contributions"
* tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Remove redundant check in pwm_ops_check()
pwm: tiehrpwm: Enable pwmchip's parent device before setting configuration
pwm: Update MAINTAINER entry
rust: pwm: Add __rust_helper to helpers
rust: pwm: Simplify to_result call sites and unsafe blocks
rust: pwm: Fix potential memory leak on init error
dt-bindings: pwm: nxp,lpc32xx-pwm: Specify clocks property as mandatory
pwm: th1520: Replace `kernel::c_str!` with C-Strings
pwm: dwc: Use size macro
pwm: Emit native configuration in /sys/kernel/debug/pwm
rust: pwm: Add UnregisteredChip wrapper around Chip
rust: pwm: Update ARef and AlwaysRefCounted imports to use sync::aref
Linus Torvalds [Wed, 11 Feb 2026 17:43:43 +0000 (09:43 -0800)]
Merge tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The highlight here is that David Lechner has added support for
multi-lane SPI devices. Unlike the existing dual/quad SPI support this
is for devices (typically ADCs/DACs) which support multiple
independent data streams over multiple data lanes, instead of sending
one data stream N times as fast they simultaneously transfer N
different data streams.
This is very similar to the case where multiple devices are grouped
together but in this case it's a single device in a way that's visible
to software.
Otherwise there's been quite a bit of work on existing drivers, both
cleanup and feature improvement, and a reasonable collection of new
drivers.
- Support for multi-lane SPI devices
- Preparatory work for some memory mapped flash improvements that
will happen in the MTD subsystem
- Several conversions to fwnode APIs
- A bunch of cleanup and hardening work on the ST drivers
- Support for DMA mode on Renesas RZV2H and i.MX target mode
- Support for ATCSPI200, AXIADO AX300, NXP XPI and Renesas RZ/N1"
* tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (108 commits)
spi: tools: Add include folder to .gitignore
spi: cadence-qspi: Add support for the Renesas RZ/N1 controller
spi: cadence-qspi: Kill cqspi_jh7110_clk_init
spi: dt-bindings: cdns,qspi-nor: Add Renesas RZ/N1D400 to the list
spi: geni-qcom: Add target abort support
spi: geni-qcom: Drop unused msg parameter from timeout handlers
spi: geni-qcom: Fix abort sequence execution for serial engine errors
spi: geni-qcom: Improve target mode allocation by using proper allocation functions
spi: xilinx: use device property accessors.
dt-bindings: spi: Add binding for Faraday FTSSP010
spi: axi-spi-engine: support SPI_MULTI_LANE_MODE_STRIPE
spi: dt-bindings: adi,axi-spi-engine: add multi-lane support
spi: Documentation: add page on multi-lane support
spi: add multi_lane_mode field to struct spi_transfer
spi: support controllers with multiple data lanes
spi: dt-bindings: add spi-{tx,rx}-lane-map properties
spi: dt-bindings: change spi-{rx,tx}-bus-width to arrays
spi: dw: Remove not-going-to-be-supported code for Baikal SoC
spi: cadence-qspi: Use a default value for cdns,fifo-width
spi: cadence-qspi: Make sure write protection is disabled
...
Linus Torvalds [Wed, 11 Feb 2026 17:40:12 +0000 (09:40 -0800)]
Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
Linus Torvalds [Wed, 11 Feb 2026 17:23:13 +0000 (09:23 -0800)]
Merge tag 'regmap-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main change here is the implementation of a mechanism for
generating register defaults via a callback rather than with a table
in the driver.
This is useful for devices where there are large ranges of registers
with the same or generated values, it allows us to have a small amount
of code instead of a larger amount of default data"
* tag 'regmap-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Demote defaults readback from HW to debug print
regmap: add KUnit coverage for reg_default_cb callback
regmap: Add reg_default_cb callback for flat cache defaults
regmap: Enable REGMAP when REGMAP_SLIMBUS is enabled
Linus Torvalds [Wed, 11 Feb 2026 17:19:47 +0000 (09:19 -0800)]
Merge tag 'chrome-platform-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New cros_ec_lightbar features:
- Report the number of exposed LED segments via sysfs
- Support large sequence of program to be transmitted
Fixes:
- Don't touch fwnode_handle::dev which is a private field
- Fix wrong assignment for response size in cros_ec_lightbar
Cleanups:
- Use acpi_get_local_u64_address() helper"
* tag 'chrome-platform-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: lightbar: Use flexible array member
platform/chrome: lightbar: Fix lightbar_program_ex alignment
platform/chrome: lightbar: Add support for large sequence
platform/chrome: lightbar: Report number of segments
platform/chrome: cros_ec_lightbar: Fix response size initialization
platform/chrome: cros_typec_switch: Use acpi_get_local_u64_address()
platform/chrome: cros_typec_switch: Don't touch struct fwnode_handle::dev
Linus Torvalds [Wed, 11 Feb 2026 05:46:12 +0000 (21:46 -0800)]
Merge tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
Linus Torvalds [Wed, 11 Feb 2026 05:42:10 +0000 (21:42 -0800)]
Merge tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Fix device reference leak in error path
- Check if system provides a 64-bit free running platform counter
- Minor fixes in debug code
* tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: lba_pci: Add debug code to show IO and PA ranges
parisc: Detect 64-bit free running platform counter
parisc: Fix minor printk issues in iosapic debug code
parisc: Enhance debug code for PAT firmware
parisc: Add PDC PAT call to get free running 64-bit counter
parisc: Fix module path output in qemu tables
parisc: Export model name for MPE/ix
parisc: Prevent interrupts during reboot
parisc: Print hardware IDs as 4 digit hex strings
parisc: kernel: replace kfree() with put_device() in create_tree_node()
Linus Torvalds [Wed, 11 Feb 2026 05:11:08 +0000 (21:11 -0800)]
Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
Linus Torvalds [Wed, 11 Feb 2026 05:03:14 +0000 (21:03 -0800)]
Merge tag 'soc-arm-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm platform SoC code updates from Arnd Bergmann:
"These are mainly code cleanups, dropping some unneeded code, plus a
reference counting leak fix"
* tag 'soc-arm-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: at91: remove unnecessary of_platform_default_populate calls
ARM: at91: Move PM init functions to .init_late hook
ARM: omap1: drop unused Kconfig symbol
ARM: omap2: Fix reference count leaks in omap_control_init()
Linus Torvalds [Wed, 11 Feb 2026 04:45:30 +0000 (20:45 -0800)]
Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
Linus Torvalds [Wed, 11 Feb 2026 04:44:10 +0000 (20:44 -0800)]
Merge tag 'soc-defconfig-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"These are the usual updates, enabling mode newly merged device drivers
for various Arm and RISC-V based platforms in the defconfig files.
The Renesas and NXP defconfig files also get a refresh for modified
Kconfig options"
* tag 'soc-defconfig-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: defconfig: spacemit: k3: enable clock support
ARM: defconfig: turn off CONFIG_EXPERT
ARM: defconfig: move entries
arm64: defconfig: Enable configurations for Kontron SMARC-sAM67
ARM: imx_v4_v5_defconfig: update for v6.19-rc1
arm64: defconfig: Enable Apple Silicon drivers
arm64: select APPLE_PMGR_PWRSTATE for ARCH_APPLE
arm64: defconfig: Enable Mediatek HDMIv2 driver
ARM: shmobile: defconfig: Refresh for v6.19-rc1
arm64: defconfig: Enable PCIe for the Renesas RZ/G3S SoC
arm64: defconfig: Enable RZ/G3E USB3 PHY driver
arm64: defconfig: Enable EC drivers for Qualcomm-based laptops
arm64: defconfig: Enable options for Qualcomm Milos SoC
ARM: imx_v6_v7_defconfig: enable EPD regulator needed for Kobo Clara 2e
ARM: imx_v6_v7_defconfig: Configure CONFIG_SND_SOC_FSL_ASOC_CARD as module
ARM: multi_v7_defconfig: enable DA9052 and MC13XXX
arm64: defconfig: enable clocks, interconnect and pinctrl for Qualcomm Kaanapali
arm64: defconfig: Drop duplicate CONFIG_OMAP_USB2 entry
arm64: defconfig: Enable missing AMD/Xilinx drivers
Linus Torvalds [Wed, 11 Feb 2026 04:27:33 +0000 (20:27 -0800)]
Merge tag 'asm-generic-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic header updates from Arnd Bergmann:
"A series from Thomas Weißschuh cleans up the UAPI header files to no
longer contain any references to Kconfig symbols, as these make no
sense in userspace.
The build-time check for these was originally added by Sam Ravnborg in
linux-2.6.28, and a later version started warning for all newly added
CONFIG_* checks here but kept a list of known exceptions. With the
last exceptions gone from that list, the warning is now unconditional
in 'make headers_install'.
John Garry contributed a cleanup of cpumask_of_node()"
* tag 'asm-generic-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
scripts: headers_install.sh: Remove config leak ignore machinery
x86/uapi: Stop leaking kconfig references to userspace
nios2: uapi: Remove custom asm/swab.h from UAPI
ARM: uapi: Drop PSR_ENDSTATE
ARC: Always use SWAPE instructions for __arch_swab32()
include/asm-generic/topology.h: Remove unused definition of cpumask_of_node()
Linus Torvalds [Wed, 11 Feb 2026 04:03:30 +0000 (20:03 -0800)]
x86: keep legacy generated vdso files around in .gitignore file
Commit 93d73005bff4 ("x86/entry/vdso: Rename vdso_image_* to
vdso*_image") updated the vdso .gitignore file with the new filenames,
which is certainly not incorrect.
However, while adding new generated names is obviously the right thing
to do, you should *not* immediately remove the old filenames from the
.gitignore file when things move around or get renamed, because people
still have those old generated files in their build trees - and they
haven't suddenly become valid files to commit to the repository just
because they were moved or renamed.
While it's mostly just a slight visual nuisance for 'git status' that
can be fixed up with a clean build tree, it can become more serious than
that: see for example commit 04a3389b3535 ("Remove stale generated
'genheaders' file").
That commit removed up a stale generated file that had been carelessly
committed by a kernel developer because it wasn't properly ignored any
more and thus showed up as a new file in their tree.
Fixes: 93d73005bff4 ("x86/entry/vdso: Rename vdso_image_* to vdso*_image") Cc: Peter Anvin <hpa@zytor.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 11 Feb 2026 03:52:18 +0000 (19:52 -0800)]
Merge tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The usual smattering of x86/misc changes.
The IPv6 patch in here surprised me in a couple of ways. First, the
function it inlines is able to eat a lot more CPU time than I would
have expected. Second, the inlining does not seem to bloat the kernel,
at least in the configs folks have tested.
- Inline x86-specific IPv6 checksum helper
- Update IOMMU docs to use stable identifiers
- Print unhashed pointers on fatal stack overflows"
* tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Print unhashed pointers on stack overflow
Documentation/x86: Update IOMMU spec references to use stable identifiers
x86/lib: Inline csum_ipv6_magic()
Linus Torvalds [Wed, 11 Feb 2026 03:34:26 +0000 (19:34 -0800)]
Merge tag 'x86_entry_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry code updates from Dave Hansen:
"This is entirely composed of a set of long overdue VDSO cleanups. They
makes the VDSO build much more logical and zap quite a bit of old
cruft.
It also results in a coveted net-code-removal diffstat"
* tag 'x86_entry_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/vdso: Add vdso2c to .gitignore
x86/entry/vdso32: Omit '.cfi_offset eflags' for LLVM < 16
MAINTAINERS: Adjust vdso file entry in INTEL SGX
x86/entry/vdso/selftest: Update location of vgetrandom-chacha.S
x86/entry/vdso: Fix filtering of vdso compiler flags
x86/entry/vdso: Update the object paths for "make vdso_install"
x86/entry/vdso32: When using int $0x80, use it directly
x86/cpufeature: Replace X86_FEATURE_SYSENTER32 with X86_FEATURE_SYSFAST32
x86/vdso: Abstract out vdso system call internals
x86/entry/vdso: Include GNU_PROPERTY and GNU_STACK PHDRs
x86/entry/vdso32: Remove open-coded DWARF in sigreturn.S
x86/entry/vdso32: Remove SYSCALL_ENTER_KERNEL macro in sigreturn.S
x86/entry/vdso32: Don't rely on int80_landing_pad for adjusting ip
x86/entry/vdso: Refactor the vdso build
x86/entry/vdso: Move vdso2c to arch/x86/tools
x86/entry/vdso: Rename vdso_image_* to vdso*_image
Linus Torvalds [Wed, 11 Feb 2026 03:19:06 +0000 (19:19 -0800)]
Merge tag 'x86_sev_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Make the SEV internal header really internal and carve out the
SVSM-specific code into a separate compilation unit, along with other
cleanups and fixups
[ TLA translation service: 'SEV' is AMD's 'Secure Encrypted
Virtualization' and SVSM is an ETLA ('Enhanced TLA') for 'Secure
VM Service Module'.
Some of us have trouble keeping track of this all and need all the
help we can get ]
* tag 'x86_sev_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Don't emit BSS_DECRYPTED section unless it is in use
x86/sev: Use kfree_sensitive() when freeing a SNP message descriptor
x86/sev: Rename sev_es_ghcb_handle_msr() to __vc_handle_msr()
x86/sev: Carve out the SVSM code into a separate compilation unit
x86/sev: Add internal header guards
x86/sev: Move the internal header
Linus Torvalds [Wed, 11 Feb 2026 03:01:45 +0000 (19:01 -0800)]
Merge tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt updates from Borislav Petkov:
- A nice cleanup to the paravirt code containing a unification of the
paravirt clock interface, taming the include hell by splitting the
pv_ops structure and removing of a bunch of obsolete code (Juergen
Gross)
* tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/paravirt: Use XOR r32,r32 to clear register in pv_vcpu_is_preempted()
x86/paravirt: Remove trailing semicolons from alternative asm templates
x86/pvlocks: Move paravirt spinlock functions into own header
x86/paravirt: Specify pv_ops array in paravirt macros
x86/paravirt: Allow pv-calls outside paravirt.h
objtool: Allow multiple pv_ops arrays
x86/xen: Drop xen_mmu_ops
x86/xen: Drop xen_cpu_ops
x86/xen: Drop xen_irq_ops
x86/paravirt: Move pv_native_*() prototypes to paravirt.c
x86/paravirt: Introduce new paravirt-base.h header
x86/paravirt: Move paravirt_sched_clock() related code into tsc.c
x86/paravirt: Use common code for paravirt_steal_clock()
riscv/paravirt: Use common code for paravirt_steal_clock()
loongarch/paravirt: Use common code for paravirt_steal_clock()
arm64/paravirt: Use common code for paravirt_steal_clock()
arm/paravirt: Use common code for paravirt_steal_clock()
sched: Move clock related paravirt code to kernel/sched
paravirt: Remove asm/paravirt_api_clock.h
x86/paravirt: Move thunk macros to paravirt_types.h
...
Linus Torvalds [Wed, 11 Feb 2026 02:59:06 +0000 (18:59 -0800)]
Merge tag 'x86_microcode_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader update from Borislav Petkov:
- Since debugging the microcode loader makes sense on baremetal too (it
was used in a guest only until now), extend it to be able to do that
too
* tag 'x86_microcode_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Allow loader debugging to be enabled on baremetal too
Linus Torvalds [Wed, 11 Feb 2026 02:43:03 +0000 (18:43 -0800)]
Merge tag 'x86_cleanups_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual set of cleanups and simplifications all over the tree
* tag 'x86_cleanups_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/segment: Use MOVL when reading segment registers
selftests/x86: Clean up sysret_rip coding style
x86/mm: Hide mm_free_global_asid() definition under CONFIG_BROADCAST_TLB_FLUSH
x86/crash: Use set_memory_p() instead of __set_memory_prot()
x86/CPU/AMD: Simplify the spectral chicken fix
x86/platform/olpc: Replace strcpy() with strscpy() in xo15_sci_add()
x86/split_lock: Remove dead string when split_lock_detect=fatal
Linus Torvalds [Wed, 11 Feb 2026 02:24:56 +0000 (18:24 -0800)]
Merge tag 'x86_cache_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Extend the resctrl machinery to support telemetry monitoring on
Intel (Tony Luck)
The practical usage of this is being able to tell how much energy or
how much work can be attributed to a group of tasks tracked under a
single idenitifier. Prepend this work with proper refactoring of
resctrl domains handling code.
* tag 'x86_cache_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86,fs/resctrl: Update documentation for telemetry events
x86/resctrl: Enable RDT_RESOURCE_PERF_PKG
fs/resctrl: Move RMID initialization to first mount
x86,fs/resctrl: Compute number of RMIDs as minimum across resources
fs/resctrl: Move allocation/free of closid_num_dirty_rmid[]
x86/resctrl: Handle number of RMIDs supported by RDT_RESOURCE_PERF_PKG
x86/resctrl: Add energy/perf choices to rdt boot option
x86,fs/resctrl: Handle domain creation/deletion for RDT_RESOURCE_PERF_PKG
fs/resctrl: Refactor rmdir_mondata_subdir_allrdtgrp()
fs/resctrl: Refactor mkdir_mondata_subdir()
x86/resctrl: Read telemetry events
x86/resctrl: Find and enable usable telemetry events
x86,fs/resctrl: Add architectural event pointer
x86,fs/resctrl: Fill in details of events for performance and energy GUIDs
x86/resctrl: Discover hardware telemetry events
fs/resctrl: Emphasize that L3 monitoring resource is required for summing domains
x86,fs/resctrl: Add and initialize a resource for package scope monitoring
x86,fs/resctrl: Add an architectural hook called for first mount
x86,fs/resctrl: Support binary fixed point event counters
x86,fs/resctrl: Handle events that can be read from any CPU
...
Export plpks_wrapping_is_supported() so trusted-keys links cleanly
This patch is intended to be applied on top of the earlier "Extend "trusted
" keys to support a new trust source named the PowerVM Key Wrapping Module
(PKWM)" series (v5). Link: https://lore.kernel.org/all/20260127145228.48320-1-ssrish@linux.ibm.com/ Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202602010724.1g9hbLKv-lkp@intel.com/ Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20260201165344.950870-1-ssrish@linux.ibm.com
Linus Torvalds [Wed, 11 Feb 2026 02:22:04 +0000 (18:22 -0800)]
Merge tag 'x86_alternatives_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 alternatives update from Borislav Petkov:
- Reorganize the alternatives patching mechanism to patch a single
location only once instead of multiple times as it was the case with
the two or three alternative options macros
* tag 'x86_alternatives_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternative: Patch a single alternative location only once
x86/alternative: Use helper functions for patching alternatives
Linus Torvalds [Wed, 11 Feb 2026 02:14:36 +0000 (18:14 -0800)]
Merge tag 'edac_updates_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Remove two drivers for obsolete hardware: i82443bxgx_edac and
r82600_edac
- Add support for Intel Amston Lake and Panther Lake-H SoCs to
igen6_edac
- The usual amount of fixes and cleanups
* tag 'edac_updates_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/r82600: Remove this obsolete driver
EDAC/i82443bxgx: Remove driver that has been marked broken since 2007
EDAC/amd64: Avoid a -Wformat-security warning
RAS/AMD/ATL: Remove an unneeded semicolon
EDAC/igen6: Add more Intel Panther Lake-H SoCs support
EDAC/igen6: Make masks of {MCHBAR, TOM, TOUUD, ECC_ERROR_LOG} configurable
EDAC/igen6: Add two Intel Amston Lake SoCs support
EDAC/i5400: Fix snprintf() limit calculation in calculate_dimm_size()
EDAC/i5000: Fix snprintf() size calculation in calculate_dimm_size()
Linus Torvalds [Wed, 11 Feb 2026 01:02:23 +0000 (17:02 -0800)]
Merge tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number
from the VDSO, but as the VDSO data is per process there is no way to
make it work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to
pass -fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when
__beNN types are used with get/put_unaligned() as sparse builds add a
special 'bitwise' attribute to them which prevents sparse to evaluate
the Generic in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the
problem, but requires a recent sparse install. So this adds a sanity
check to sparse builds, which validates that sparse is available and
capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function
call overhead and problems with automatic stack variable
initialization.
Interestingly enough the force inlining results in smaller code than
the un-inlined variant produced by GCC when optimizing for size.
* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
powerpc/vdso: Provide clock_getres_time64()
tools headers: Remove unneeded ignoring of warnings in unaligned.h
tools headers: Update the linux/unaligned.h copy with the kernel sources
vdso: Switch get/put_unaligned() from packed struct to memcpy()
parisc: Inline a type punning version of get_unaligned_le32()
vdso: Remove struct getcpu_cache
MIPS: vdso: Provide getres_time64() for 32-bit ABIs
arm64: vdso32: Provide clock_getres_time64()
ARM: VDSO: Provide clock_getres_time64()
ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
x86/vdso: Provide clock_getres_time64() for x86-32
selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
vdso: Add prototype for __vdso_clock_getres_time64()
Linus Torvalds [Wed, 11 Feb 2026 00:41:59 +0000 (16:41 -0800)]
Merge tag 'timers-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Inline timecounter_cyc2time() as that is now used in the networking
hotpath. Inlining it significantly improves performance.
- Optimize the tick dependency check in case that the tracepoint is
disabled, which improves the hotpath performance in the tick
management code, which is a hotpath on transitions in and out of
idle.
- The usual cleanups and improvements
* tag 'timers-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/kunit: Document handling of negative years of is_leap()
tick/nohz: Optimize check_tick_dependency() with early return
time/sched_clock: Use ACCESS_PRIVATE() to evaluate hrtimer::function
hrtimer: Drop _tv64() helpers
hrtimer: Remove public definition of HIGH_RES_NSEC
hrtimer: Remove unused resolution constants
time/timecounter: Inline timecounter_cyc2time()
Linus Torvalds [Wed, 11 Feb 2026 00:37:54 +0000 (16:37 -0800)]
Merge tag 'timers-clocksource-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"A rather small set of boring cleanups, fixes and improvements"
* tag 'timers-clocksource-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/mips-gic-timer: Move GIC timer to request_percpu_irq()
clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock.
clocksource/drivers/armada-370-xp: Fix dead link to timer binding
clocksource/drivers/timer-integrator-ap: Add missing Kconfig dependency on OF
clocksource/drivers/sh_tmu: Always leave device running after probe
Linus Torvalds [Wed, 11 Feb 2026 00:30:29 +0000 (16:30 -0800)]
Merge tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
Linus Torvalds [Tue, 10 Feb 2026 22:01:40 +0000 (14:01 -0800)]
Merge tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq chip driver updates from Thomas Gleixner:
- Add support for the Renesas RZ/V2N SoC
- Add a new driver for the Renesas RZ/[TN]2H SoCs
- Preserve the register state of the RISCV APLIC interrupt controller
accross suspend/resume
- Reinitialize the RISCV IMSIC registers after suspend/resume
- Make the various Loongson interrupt chip drivers 32/64-bit aware
- Handle the number of hardware interrupts in the SIFIVE PLIC driver
correctly
The hardware interrupt 0 is reserved which resulted in inconsistent
accounting. That went unnoticed as the off by one is only noticable
when the number of device interrupts is a multiple of 32
- The usual device tree updates, cleanups and improvements all over the
place
* tag 'irq-drivers-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
irqchip/gic-v5: Fix spelling mistake "ouside" -> "outside"
dt-bindings: interrupt-controller: sifive,plic: Clarify the riscv,ndev meaning in PLIC
irqchip/sifive-plic: Handle number of hardware interrupts correctly
irqchip/aspeed-scu-ic: Remove unused variable mask
irqchip/ti-sci-intr: Allow parsing interrupt-types per-line
dt-bindings: interrupt-controller: ti,sci-intr: Per-line interrupt-types
irqchip/renesas-rzv2h: Add suspend/resume support
irqchip/aslint-sswi: Fix error check of of_io_request_and_map() result
irqchip: Allow LoongArch irqchip drivers on both 32BIT/64BIT
irqchip/loongson-pch-pic: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-pch-msi: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-htvec: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-eiointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongson-liointc: Adjust irqchip driver for 32BIT/64BIT
irqchip/loongarch-avec: Adjust irqchip driver for 32BIT/64BIT
irqchip/riscv-aplic: Preserve APLIC states across suspend/resume
irqchip/riscv-imsic: Add a CPU pm notifier to restore the IMSIC on exit
arm64: dts: renesas: r9a09g087: Add ICU support
arm64: dts: renesas: r9a09g077: Add ICU support
irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver
...
Linus Torvalds [Tue, 10 Feb 2026 21:39:37 +0000 (13:39 -0800)]
Merge tag 'irq-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core subsystem:
- Remove the interrupt timing infrastructure
This was added seven years ago to be used for power management
purposes, but that integration never happened.
- Clean up the remaining setup_percpu_irq() users
The memory allocator is available when interrupts can be requested
so there is not need for static irq_action. Move the remaining
users to request_percpu_irq() and delete the historical cruft.
- Warn when interrupt flag inconsistencies are detected in
request*_irq().
Inconsistent flags can lead to hard to diagnose malfunction. The
fallout of this new warning has been addressed in next and the
fixes are coming in via the maintainer trees and the tip
irq/cleanup pull requests.
- Invoke affinity notifier when CPU hotplug breaks affinity
Otherwise the code using the notifier misses the affinity change
and operates on stale information.
- The usual cleanups and improvements"
* tag 'irq-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/proc: Replace snprintf with strscpy in register_handler_proc
genirq/cpuhotplug: Notify about affinity changes breaking the affinity mask
genirq: Move clear of kstat_irqs to free_desc()
genirq: Warn about using IRQF_ONESHOT without a threaded handler
irqdomain: Fix up const problem in irq_domain_set_name()
genirq: Remove setup_percpu_irq()
clocksource/drivers/mips-gic-timer: Move GIC timer to request_percpu_irq()
MIPS: Move IP27 timer to request_percpu_irq()
MIPS: Move IP30 timer to request_percpu_irq()
genirq: Remove __request_percpu_irq() helper
genirq: Remove IRQ timing tracking infrastructure
Linus Torvalds [Tue, 10 Feb 2026 21:22:50 +0000 (13:22 -0800)]
Merge tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
Linus Torvalds [Tue, 10 Feb 2026 21:17:58 +0000 (13:17 -0800)]
Merge tag 'x86-cpu-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
- CPU model updates (Andrew Cooper):
- amd: Correct the microcode table for Zenbleed
- amd: Use ZEN_MODEL_STEP_UCODE() for erratum_1386_microcode[]
- Drop vestigial PBE logic in AMD/Hygon/Centaur/Cyrix
- tsx: Set default TSX mode to auto (Nikolay Borisov)
- Drop unused Kconfig symbol X86_P6_NOP (Randy Dunlap)
* tag 'x86-cpu-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Set default TSX mode to auto
x86/cpu: Drop unused Kconfig symbol X86_P6_NOP
x86/cpu: Drop vestigial PBE logic in AMD/Hygon/Centaur/Cyrix
x86/cpu/amd: Use ZEN_MODEL_STEP_UCODE() for erratum_1386_microcode[]
x86/cpu/amd: Correct the microcode table for Zenbleed
Linus Torvalds [Tue, 10 Feb 2026 21:12:54 +0000 (13:12 -0800)]
Merge tag 'x86-boot-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/boot updates from Ingo Molnar:
- x86/acpi: Add acpi=spcr to use SPCR-provided default console
(Shenghao Yang)
- x86/acpi/boot: Correct the acpi_is_processor_usable() check again
(Yazen Ghannam)
- Refresh the x86 memory map (e820 table) handling code, and make the
printouts a bit more informative (Ingo Molnar)
* tag 'x86-boot-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
x86/acpi: Add acpi=spcr to use SPCR-provided default console
x86/boot/e820: Use <linux/sizes.h> symbols for literals
x86/boot/e820: Make sure e820_search_gap() finds all gaps
x86/boot/e820: Simplify the e820__range_remove() API
x86/boot/e820: Remove e820__range_remove()'s unused return parameter
x86/boot/e820: Simplify append_e820_table() and remove restriction on single-entry tables
x86/boot/e820: Standardize __init/__initdata tag placement
x86/boot/e820: Simplify & clarify __e820__range_add() a bit
x86/boot/e820: Rename gap_start/gap_size to max_gap_start/max_gap_start in e820_search_gap() et al
x86/boot/e820: Change e820_search_gap() to search for the highest-address PCI gap
x86/boot/e820: Clean up e820__setup_pci_gap()/e820_search_gap() a bit
x86/boot/e820: Change struct e820_table::nr_entries type from __u32 to u32
x86/boot/e820: Standardize e820 table index variable types under 'u32'
x86/boot/e820: Standardize e820 table index variable names under 'idx'
x86/boot/e820: Remove unnecessary header inclusions
x86/boot/e820: Clean up __refdata use a bit
x86/boot/e820: Clean up __e820__range_add() a bit
x86/boot/e820: Improve e820_print_type() messages
x86/boot/e820: Clean up confusing and self-contradictory verbiage around E820 related resource allocations
x86/boot/e820: Remove pointless early_panic() indirection
...
Linus Torvalds [Tue, 10 Feb 2026 20:50:10 +0000 (12:50 -0800)]
Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
Linus Torvalds [Tue, 10 Feb 2026 20:28:44 +0000 (12:28 -0800)]
Merge tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
Linus Torvalds [Tue, 10 Feb 2026 19:53:01 +0000 (11:53 -0800)]
Merge tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers
This is needed to inline these helpers into Rust code
- Remove imports available via the prelude, treewide
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial
upstream support, are coming
- Deduplicate pin-init flags
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type)
Based on this, add 'pr_*_once!' macros to print only once
- Add 'impl_flags!' macro for defining common bitflags operations:
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro,
currently a wrapper for 'debug_assert!', intended to mark the
validation of safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments
- 'ptr' module: replace 'build_assert!' with a 'const' one
- 'rbtree' module: reduce unsafe blocks on pointer derefs
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova
- More treewide replacements of 'c_str!' with C string literals
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
This also allows to support '#[cfg]' properly in the '#[vtable]'
macro, to support arbitrary types in 'module!' macro (not just an
identifier) and to remove several custom parsing helpers we had
- Use 'quote!' from the recently vendored 'quote' library and remove
our custom one
The vendored one also allows us to avoid quoting '"' and '{}'
inside the template anymore and editors can now highlight it. In
addition, it improves robustness as it eliminates the need for
string quoting and escaping
- Use 'pin_init::zeroed()' to simplify KUnit code
'pin-init' crate:
- Rewrite all procedural macros ('[pin_]init!', '#[pin_data]',
'#[pinned_drop]', 'derive([Maybe]Zeroable)') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
- Implement 'InPlaceWrite' for '&'static mut MaybeUninit<T>'. This
enables users to use external allocation mechanisms such as
'static_cell'
- Support tuple structs in 'derive([Maybe]Zeroable)'
- Support attributes on fields in '[pin_]init!' (such as
'#[cfg(...)]')
- Add a '#[default_error(<type>)]' attribute to '[pin_]init!' to
override the default error (when no '? Error' is specified)
- Support packed structs in '[pin_]init!' with
'#[disable_initialized_field_access]'
- Remove 'try_[pin_]init!' in favor of merging their feature with
'[pin_]init!'. Update the kernel's own 'try_[pin_]init!' macros to
use the 'default_error' attribute
- Correct 'T: Sized' bounds to 'T: ?Sized' in the generated
'PinnedDrop' check by '#[pin_data]'
Documentation:
- Conclude the Rust experiment
MAINTAINERS:
- Add "RUST [RUST-ANALYZER]" entry for the rust-analyzer support.
Tamir and Jesung will take care of it. They have both been active
around it for a while. The new tree will flow through the Rust one
- Add Gary as maintainer for "RUST [PIN-INIT]"
- Update Boqun and Tamir emails to their kernel.org accounts
And a few other cleanups and improvements"
* tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (59 commits)
rust: safety: introduce `unsafe_precondition_assert!` macro
rust: add `impl_flags!` macro for defining common bitflag operations
rust: print: Add pr_*_once macros
rust: bug: Support DEBUG_BUGVERBOSE_DETAILED option
rust: print: Add support for calling a function exactly once
rust: kbuild: deduplicate pin-init flags
gpu: nova-core: remove imports available via prelude
rust: clk: replace `kernel::c_str!` with C-Strings
MAINTAINERS: Update my email address to @kernel.org
rust: macros: support `#[cfg]` properly in `#[vtable]` macro.
rust: kunit: use `pin_init::zeroed` instead of custom null value
rust: macros: rearrange `#[doc(hidden)]` in `module!` macro
rust: macros: allow arbitrary types to be used in `module!` macro
rust: macros: convert `#[kunit_tests]` macro to use `syn`
rust: macros: convert `concat_idents!` to use `syn`
rust: macros: convert `#[export]` to use `syn`
rust: macros: use `quote!` for `module!` macro
rust: macros: use `syn` to parse `module!` macro
rust: macros: convert `#[vtable]` macro to use `syn`
rust: macros: use `quote!` from vendored crate
...
* tag 'bitmap-for-6.20' of https://github.com/norov/linux:
lib/tests: extend KUnit test for bitops with more cases
bitops: Add more files to the MAINTAINERS
lib/find_bit: fix uninitialized variable use in FIND_NTH_BIT
lib/tests: add KUnit test for bitops
rust: cpumask: add __rust_helper to helpers
rust: bitops: add __rust_helper to helpers
rust: bitmap: add __rust_helper to helpers
linux/bitfield.h: replace __auto_type with auto
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
Linus Torvalds [Tue, 10 Feb 2026 17:49:18 +0000 (09:49 -0800)]
Merge tag 'modules-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Module signing:
- Remove SHA-1 support for signing modules.
SHA-1 is no longer considered secure for signatures due to
vulnerabilities that can lead to hash collisions. None of the major
distributions use SHA-1 anymore, and the kernel has defaulted to
SHA-512 since v6.11.
Note that loading SHA-1 signed modules is still supported.
- Update scripts/sign-file to use only the OpenSSL CMS API for
signing.
As SHA-1 support is gone, we can drop the legacy PKCS#7 API which
was limited to SHA-1. This also cleans up support for legacy
OpenSSL versions.
Cleanups and fixes:
- Use system_dfl_wq instead of the per-cpu system_wq following the
ongoing workqueue API refactoring.
- Avoid open-coded kvrealloc() in module decompression logic by using
the standard helper.
- Improve section annotations by replacing the custom __modinit with
__init_or_module and removing several unused __INIT*_OR_MODULE
macros.
- Fix kernel-doc warnings in include/linux/moduleparam.h.
- Ensure set_module_sig_enforced is only declared when module signing
is enabled.
- Fix gendwarfksyms build failures on 32-bit hosts.
MAINTAINERS:
- Update the module subsystem entry to reflect the maintainer
rotation and update the git repository link"
* tag 'modules-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
modules: moduleparam.h: fix kernel-doc comments
module: Only declare set_module_sig_enforced when CONFIG_MODULE_SIG=y
module/decompress: Avoid open-coded kvrealloc()
gendwarfksyms: Fix build on 32-bit hosts
sign-file: Use only the OpenSSL CMS API for signing
module: Remove SHA-1 support for module signing
module: replace use of system_wq with system_dfl_wq
params: Replace __modinit with __init_or_module
module: Remove unused __INIT*_OR_MODULE macros
MAINTAINERS: Update module subsystem maintainers and repository
Linus Torvalds [Tue, 10 Feb 2026 17:32:30 +0000 (09:32 -0800)]
Merge tag 'keys-next-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keys update from David Howells:
"This adds support for ML-DSA signatures in X.509 certificates and
PKCS#7/CMS messages, thereby allowing this algorithm to be used for
signing modules, kexec'able binaries, wifi regulatory data, etc..
This requires OpenSSL-3.5 at a minimum and preferably OpenSSL-4 (so
that it can avoid the use of CMS signedAttrs - but that version is not
cut yet). certs/Kconfig does a check to hide the signing options if
OpenSSL does not list the algorithm as being available"
* tag 'keys-next-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
pkcs7: Change a pr_warn() to pr_warn_once()
pkcs7: Allow authenticatedAttributes for ML-DSA
modsign: Enable ML-DSA module signing
pkcs7, x509: Add ML-DSA support
pkcs7: Allow the signing algo to do whatever digestion it wants itself
pkcs7, x509: Rename ->digest to ->m
x509: Separately calculate sha256 for blacklist
crypto: Add ML-DSA crypto_sig support
Linus Torvalds [Tue, 10 Feb 2026 17:11:21 +0000 (09:11 -0800)]
Merge tag 'kmalloc_obj-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj updates from Kees Cook:
"Introduce the kmalloc_obj* family of APIs for switching to type-based
kmalloc allocations, away from purely size-based allocations.
Discussed on lkml, with you, and at Linux Plumbers. It's been in -next
for the entire dev cycle.
Before the merge window closes, I'd like to send the treewide
change (generated from the Coccinelle script included here), which
mechanically converts almost 20k callsites from kmalloc* to
kmalloc_obj*:
This change needed fixes for mismatched types (since now the return
type from allocations is a pointer to the requested type, not "void
*"), and I've been fixing these over the last 4 releases.
These fixes have mostly been trivial mismatches with const qualifiers
or accidentally identical sizes (e.g. same object size: "struct kvec"
vs "struct iovec", or differing pointers to pointers), but I did catch
one case of too-small allocation.
Summary:
- Introduce kmalloc_obj*() family of type-based allocator APIs
- checkpatch: Suggest kmalloc_obj family for sizeof allocations
- coccinelle: Add kmalloc_objs conversion script"
* tag 'kmalloc_obj-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
coccinelle: Add kmalloc_objs conversion script
slab: Introduce kmalloc_flex() and family
compiler_types: Introduce __flex_counter() and family
checkpatch: Suggest kmalloc_obj family for sizeof allocations
slab: Introduce kmalloc_obj() and family
Linus Torvalds [Tue, 10 Feb 2026 16:54:13 +0000 (08:54 -0800)]
Merge tag 'hardening-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Mostly small cleanups and various scattered annotations and flex array
warning fixes that we reviewed by unlanded in other trees. Introduces
new annotation for expanding counted_by to pointer members, now that
compiler behavior between GCC and Clang has been normalized.
- Various missed __counted_by annotations (Thorsten Blum)
- Various missed -Wflex-array-member-not-at-end fixes (Gustavo A. R.
Silva)
Linus Torvalds [Tue, 10 Feb 2026 16:52:41 +0000 (08:52 -0800)]
Merge tag 'pstore-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Catch unlikely NULL return from vmap() (Ruipeng Qi)
- Handle corner case of past incomplete buffer fills causing heap
overflow (Sai Ritvik Tanksalkar)
* tag 'pstore-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ram: fix buffer overflow in persistent_ram_save_old()
pstore: ram_core: fix incorrect success return when vmap() fails
The existing allocation of scatterlists in omap_crypto_copy_sg_lists()
was allocating an array of scatterlist pointers, not scatterlist objects,
resulting in a 4x too small allocation.
Use sizeof(*new_sg) to get the correct object size.
Fixes: 74ed87e7e7f7 ("crypto: omap - add base support library for common routines") Signed-off-by: Kees Cook <kees@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 10 Feb 2026 16:36:42 +0000 (08:36 -0800)]
Merge tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
Linus Torvalds [Tue, 10 Feb 2026 16:31:09 +0000 (08:31 -0800)]
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
Linus Torvalds [Tue, 10 Feb 2026 16:23:13 +0000 (08:23 -0800)]
smb client: Add generated file to gitignore file
The smb client code recently started generating the error mapping table
from a common header, but didn't tell git about it, so then git ends up
thinking maybe it should be committed.
Günther Noack [Fri, 6 Feb 2026 15:11:55 +0000 (16:11 +0100)]
landlock: Transpose the layer masks data structure
The layer masks data structure tracks the requested but unfulfilled
access rights during an operation's security check. It stores one bit
for each combination of access right and layer index. If the bit is
set, that access right is not granted (yet) in the given layer and we
have to traverse the path further upwards to grant it.
Previously, the layer masks were stored as arrays mapping from access
right indices to layer_mask_t. The layer_mask_t value then indicates
all layers in which the given access right is still (tentatively)
denied.
This patch introduces struct layer_access_masks instead: This struct
contains an array with the access_mask_t of each (tentatively) denied
access right in that layer.
The hypothesis of this patch is that this simplifies the code enough
so that the resulting code will run faster:
* We can use bitwise operations in multiple places where we previously
looped over bits individually with macros. (Should require less
branch speculation and lends itself to better loop unrolling.)
* Code is ~75 lines smaller.
Other noteworthy changes:
* In no_more_access(), call a new helper function may_refer(), which
only solves the asymmetric case. Previously, the code interleaved
the checks for the two symmetric cases in RENAME_EXCHANGE. It feels
that the code is clearer when renames without RENAME_EXCHANGE are
more obviously the normal case.
Tradeoffs:
This change improves performance, at a slight size increase to the
layer masks data structure.
This fixes the size of the data structure at 32 bytes for all types of
access rights. (64, once we introduce a 17th filesystem access right).
For filesystem access rights, at the moment, the data structure has
the same size as before, but once we introduce the 17th filesystem
access right, it will double in size (from 32 to 64 bytes), as
access_mask_t grows from 16 to 32 bit [1].
Günther Noack [Fri, 6 Feb 2026 15:11:54 +0000 (16:11 +0100)]
landlock: Add access_mask_subset() helper
This helper function checks whether an access_mask_t has a subset of the
bits enabled than another one. This expresses the intent a bit smoother
in the code and does not cost us anything when it gets inlined.
fs_bench benchmarks the performance of Landlock's path walk
by exercising it in a scenario that amplifies Landlock's overhead:
* Create a large number of nested directories
* Enforce a Landlock policy in which a rule is associated with each of
these subdirectories
* Benchmark openat() applied to the deepest directory,
forcing Landlock to walk the entire path.
Carl Lee [Tue, 10 Feb 2026 07:26:34 +0000 (15:26 +0800)]
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
When MPQ8785 reports VOUT_MODE as VID mode, mpq8785_identify()
configures the driver for direct mode. The subsequent
pmbus_identify_common() check then fails due to a mismatch
between the reported mode and the configured mode, causing
device initialization to fail.
Override the reported VOUT_MODE to direct mode to keep the
driver configuration consistent with the reported mode and
allow successful device initialization.
This does not change how voltages are interpreted, but avoids
a false identification failure caused by mismatched mode
handling.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix.
Reported-by: Jean Delvare <jdelvare@suse.de> Closes: https://lore.kernel.org/linux-hwmon/20260121095342.73e723cb@endymion/ Cc: Jean Delvare <jdelvare@suse.de> Cc: Junrui Luo <moonafterrain@outlook.com> Fixes: 6946c726c3f4 ("hwmon: (ibmpex) fix use-after-free in high/low store") Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Vlastimil Babka [Sun, 8 Feb 2026 18:17:42 +0000 (19:17 +0100)]
Merge branch 'slab/for-7.0/sheaves' into slab/for-next
Merge series "slab: replace cpu (partial) slabs with sheaves".
The percpu sheaves caching layer was introduced as opt-in but the goal
was to eventually move all caches to them. This is the next step,
enabling sheaves for all caches (except the two bootstrap ones) and then
removing the per cpu (partial) slabs and lots of associated code.
Besides the lower locking overhead and much more likely fastpath when
freeing, this removes the rather complicated code related to the cpu
slab lockless fastpaths (using this_cpu_try_cmpxchg128/64) and all its
complications for PREEMPT_RT or kmalloc_nolock().
The lockless slab freelist+counters update operation using
try_cmpxchg128/64 remains and is crucial for freeing remote NUMA objects
and to allow flushing objects from sheaves to slabs mostly without the
node list_lock.
Linus Torvalds [Tue, 10 Feb 2026 04:53:18 +0000 (20:53 -0800)]
Merge tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
Linus Torvalds [Tue, 10 Feb 2026 04:49:19 +0000 (20:49 -0800)]
Merge tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
Linus Torvalds [Tue, 10 Feb 2026 04:38:27 +0000 (20:38 -0800)]
Merge tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- fix running as Xen PVH guest in 32-bit mode without PAE
- fix PV device handling for suspend/resume when running as
a Xen guest
- clean up workqueue usage
- fix the Xen balloon driver for PVH dom0
- introduce the possibility to use hypercalls for console
messages in unprivileged guests
- enable Xen dom0 use of virtio devices in nested virtualization
setups
- simplify the xen-mcelog driver
* tag 'for-linus-7.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xenbus: Rename helpers to freeze/thaw/restore
xenbus: Use .freeze/.thaw to handle xenbus devices
xen/mcelog: simplify MCE_GETCLEAR_FLAGS using xchg()
xen/balloon: improve accuracy of initial balloon target for dom0
Partial revert "x86/xen: fix balloon target initialization for PVH dom0"
xen: introduce xen_console_io option
xen/virtio: Don't use grant-dma-ops when running as Dom0
x86/xen/pvh: Enable PAE mode for 32-bit guest only when CONFIG_X86_PAE is set
xen: privcmd: WQ_PERCPU added to alloc_workqueue users
xen/events: replace use of system_wq with system_percpu_wq
Linus Torvalds [Tue, 10 Feb 2026 04:28:45 +0000 (20:28 -0800)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
Linus Torvalds [Tue, 10 Feb 2026 04:20:17 +0000 (20:20 -0800)]
Merge tag 'sparc-for-7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Hardcode uapi ioctls.h TC* constants to not rely upon struct termio
that has been dropped by glibc
- Fix bug for fork/clone and add support for clone3
- Add ARCH_HAS_CC_CAN_LINK
- API choice improvements and cleanup of unused variables
* tag 'sparc-for-7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc: remove unused variable strtab
sparc64: fix unused variable warning
sparc: don't reference obsolete termio struct for TC* constants
sparc: vio: Replace snprintf with strscpy in vio_create_one
sparc: Add architecture support for clone3
sparc: Synchronize user stack on fork and clone
sparc: Implement ARCH_HAS_CC_CAN_LINK
Linus Torvalds [Tue, 10 Feb 2026 04:18:59 +0000 (20:18 -0800)]
Merge tag 'm68k-for-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Add missing put_device() in the NuBus driver
- Replace vsprintf() with vsnprintf() on Sun-3
* tag 'm68k-for-v7.0-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: sun3: Replace vsprintf() with bounded vsnprintf()
nubus: Call put_device() in bus initialization error path
Linus Torvalds [Tue, 10 Feb 2026 04:17:03 +0000 (20:17 -0800)]
Merge tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit
support to virtualized 3490E types devices
- Implement exception based WARN() and WARN_ONCE() similar to x86
- Slightly optimize preempt primitives like __preempt_count_add() and
__preempt_count_dec_and_test()
- A couple of small fixes and improvements
* tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (35 commits)
s390/tape: Consolidate tape config options and modules
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
s390/tape: Rename tape_34xx.c to tape_3490.c
s390/tape: Cleanup sense data analysis and error handling
s390/tape: Remove 3480 tape device type
s390/tape: Remove unused command definitions
s390/tape: Remove special block id handling
s390/tape: Remove tape load display support
s390/tape: Remove support for 3590/3592 models
s390/kexec: Emit an error message when cmdline is too long
s390/configs: Enable BLK_DEV_NULL_BLK as module
s390: Document s390 stackprotector support
s390/perf: Disable register readout on sampling events
s390/Kconfig: Define non-zero ILLEGAL_POINTER_VALUE
s390/bug: Prevent tail-call optimization
s390/bug: Skip __WARN_trap() in call traces
s390/bug: Implement WARN_ONCE()
s390/bug: Implement __WARN_printf()
s390/traps: Copy monitor code to pt_regs
s390/bug: Introduce and use monitor code macro
...
Linus Torvalds [Tue, 10 Feb 2026 04:15:14 +0000 (20:15 -0800)]
Merge tag 'nolibc-20260206-for-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- All time-related functionality uses 64-bit timestamps for
y2038 compatibility
- fread() and fskeek() support
- ptrace() support
- Addition of libc-test to the regular kselftests
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260206-for-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
tools/nolibc: Add a simple test for writing to a FILE and reading it back
tools/nolibc: Add fseek() to stdio.h
tools/nolibc: Add fread() to stdio.h
selftests/nolibc: also test libc-test through regular selftest framework
selftests/nolibc: scope custom flags to the nolibc-test target
selftests/nolibc: try to read from stdin in readv_zero test
selftests/nolibc: always build sparc32 tests with -mcpu=v8
tools/nolibc: align sys_vfork() with sys_fork()
selftests/nolibc: drop NOLIBC_SYSROOT=0 logic
selftests/nolibc: add static assertions around time types handling
tools/nolibc: add __nolibc_static_assert()
tools/nolibc: add compiler version detection macros
tools/nolibc: remove time conversions
selftests/nolibc: test compatibility of nolibc and kernel time types
tools/nolibc: always use 64-bit time types
tools/nolibc: use custom structs timespec and timeval
tools/nolibc/select: avoid libgcc 64-bit multiplications
tools/nolibc/gettimeofday: avoid libgcc 64-bit divisions
tools/nolibc: prefer explicit 64-bit time-related system calls
tools/nolibc/time: drop invocation of gettimeofday system call
...
Linus Torvalds [Tue, 10 Feb 2026 03:57:30 +0000 (19:57 -0800)]
Merge tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"The kthread code provides an infrastructure which manages the
preferred affinity of unbound kthreads (node or custom cpumask)
against housekeeping (CPU isolation) constraints and CPU hotplug
events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset
isolated partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making
nohz_full= also mutable through cpuset in the future"
* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
doc: Add housekeeping documentation
kthread: Document kthread_affine_preferred()
kthread: Comment on the purpose and placement of kthread_affine_node() call
kthread: Honour kthreads preferred affinity after cpuset changes
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
kthread: Include kthreadd to the managed affinity list
kthread: Include unbound kthreads in the managed affinity list
kthread: Refine naming of affinity related fields
PCI: Remove superfluous HK_TYPE_WQ check
sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
cpuset: Remove cpuset_cpu_is_isolated()
timers/migration: Remove superfluous cpuset isolation test
cpuset: Propagate cpuset isolation update to timers through housekeeping
cpuset: Propagate cpuset isolation update to workqueue through housekeeping
PCI: Flush PCI probe workqueue on cpuset isolated partition change
sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
sched/isolation: Flush memcg workqueues on cpuset isolated partition change
cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
...
Linus Torvalds [Tue, 10 Feb 2026 03:33:44 +0000 (19:33 -0800)]
Merge tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add support for "slow" (long-term trend) workload type hints to
the Intel int340x thermal driver and selftests (and enable it for
Panther Lake), add support for MT8196 along with DT bindings and for
MT7987 to the Mediatek LVTS thermal driver, add support for RZ/T2H and
RZ/N2H along with DT bindings to the Renesas rzg3e thermal driver, add
support for the Panther Lake, Wildcat Lake and Nova Lake processors to
the intel_tcc_cooling driver, fix bugs, make some cosmetic changes
including code cleanups and library function substitutions, and update
documentation.
Specifics:
- Add Panther Lake, Wildcat Lake and Nova Lake processor IDs to the
list of supported processors in the intel_tcc_cooling thermal
driver (Srinivas Pandruvada)
- Drop unnecessary explicit driver data clearing on removal from the
intel_pch_thermal driver (Kaushlendra Kumar)
- Add support for "slow" workload type hints to the int340x
processor_thermal driver and enable it on the Panther Lake platform
(Srinivas Pandruvada)
- Use sysfs_emit{_at}() in sysfs show functions in Intel thermal
drivers (Thorsten Blum)
- Update the x86_pkg_temp_thermal driver to handle
THERMAL_TEMP_INVALID that can be passed to it via sysfs as expected
(Rafael Wysocki)
- Drop a redundant local variable from the intel_tcc_cooling thermal
driver and fix a kerneldoc comment typo in the TCC library (Sumeet
Pawnikar)
- Fix CFLAGS and LDFLAGS in the pkg-config libthermal template
(Romain Gantois)
- Support multiple temp to raw conversion functions in the Mediatek
LVTS thermal driver and add MT8196 and MT6991 support to it (Laura
Nao)
- Add Mediatek LVTS driver support for MT7987 (Frank Wunderlich)
- Use the existing HZ_PER_MHZ macro on STM32 (Andy Shevchenko)
- Use the existing clamp() macro on BCM2835 (Thorsten Blum)
- Make the reset line optional in order to support new Renesas SoCs
where it is not available and add support for RZ/T2H and RZ/N2H to
the rzg3e thermal driver (Cosmin Tanislav)
- Document RZ/V2N TSU in the r9a09g047-tsu DT bindings (Ovidiu
Panait)
- Fix all kernel-doc warnings in the internal thermal core header
file (Randy Dunlap)
- Fix a device node reference leak in thermal_of_cm_lookup() (Felix
Gu)
- Replace some old-style library function calls with ones that are
currently recommended in several places in the thermal core and
debugfs code (Sumeet Pawnikar, Thorsten Blum)
* tag 'thermal-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
drivers: thermal: intel: tcc_cooling: Drop redundant local variable
thermal/of: Fix reference leak in thermal_of_cm_lookup()
thermal: core: thermal_core.h: fix all kernel-doc warnings
thermal: intel: x86_pkg_temp_thermal: Handle invalid temperature
thermal: renesas: rzg3e: add support for RZ/T2H and RZ/N2H
dt-bindings: thermal: r9a09g047-tsu: document RZ/T2H and RZ/N2H
thermal: renesas: rzg3e: make calibration value retrieval per-chip
thermal: renesas: rzg3e: make min and max temperature per-chip
thermal: renesas: rzg3e: make reset optional
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2N TSU
thermal/drivers/broadcom: Use clamp to simplify bcm2835_thermal_temp2adc
thermal/drivers/stm32: Use predefined HZ_PER_MHZ instead of a custom one
thermal/drivers/mediatek/lvts_thermal: Add mt7987 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT7987
dt-bindings: nvmem: mediatek: efuse: Add support for MT8196
thermal/drivers/mediatek/lvts_thermal: Add MT8196 support
thermal/drivers/mediatek/lvts: Support MSR offset for 16-bit calibration data
thermal/drivers/mediatek/lvts: Add support for ATP mode
thermal/drivers/mediatek/lvts: Add lvts_temp_to_raw variant
thermal/drivers/mediatek/lvts: Add platform ops to support alternative conversion logic
...
Linus Torvalds [Tue, 10 Feb 2026 03:00:42 +0000 (19:00 -0800)]
Merge tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
Linus Torvalds [Tue, 10 Feb 2026 02:42:47 +0000 (18:42 -0800)]
Merge tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version 20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
Linus Torvalds [Tue, 10 Feb 2026 02:14:52 +0000 (18:14 -0800)]
Merge tag 'for-7.0/block-stable-pages-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull bounce buffer dio for stable pages from Jens Axboe:
"This adds support for bounce buffering of dio for stable pages. This
was all done by Christoph. In his words:
This series tries to address the problem that under I/O pages can be
modified during direct I/O, even when the device or file system
require stable pages during I/O to calculate checksums, parity or data
operations. It does so by adding block layer helpers to bounce buffer
an iov_iter into a bio, then wires that up in iomap and ultimately
XFS.
The reason that the file system even needs to know about it, is
because reads need a user context to copy the data back, and the
infrastructure to defer ioends to a workqueue currently sits in XFS.
I'm going to look into moving that into ioend and enabling it for
other file systems. Additionally btrfs already has it's own
infrastructure for this, and actually an urgent need to bounce buffer,
so this should be useful there and could be wire up easily. In fact
the idea comes from patches by Qu that did this in btrfs.
This patch fixes all but one xfstests failures on T10 PI capable
devices (generic/095 seems to have issues with a mix of mmap and
splice still, I'm looking into that separately), and make qemu VMs
running Windows, or Linux with swap enabled fine on an XFS file on a
device using PI.
Performance numbers on my (not exactly state of the art) NVMe PI test
setup:
Sequential reads using io_uring, QD=16.
Bandwidth and CPU usage (usr/sys):
Note that the 64k read numbers look really odd to me for the baseline
zero copy case, but are reproducible over many repeated runs.
The bounce read numbers should further improve when moving the PI
validation to the file system and removing the double context switch,
which I have patches for that will sent out soon"
* tag 'for-7.0/block-stable-pages-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
xfs: use bounce buffering direct I/O when the device requires stable pages
iomap: add a flag to bounce buffer direct I/O
iomap: support ioends for direct reads
iomap: rename IOMAP_DIO_DIRTY to IOMAP_DIO_USER_BACKED
iomap: free the bio before completing the dio
iomap: share code between iomap_dio_bio_end_io and iomap_finish_ioend_direct
iomap: split out the per-bio logic from iomap_dio_bio_iter
iomap: simplify iomap_dio_bio_iter
iomap: fix submission side handling of completion side errors
block: add helpers to bounce buffer an iov_iter into bios
block: remove bio_release_page
iov_iter: extract a iov_iter_extract_bvecs helper from bio code
block: open code bio_add_page and fix handling of mismatching P2P ranges
block: refactor get_contig_folio_len
block: add a BIO_MAX_SIZE constant and use it
Linus Torvalds [Tue, 10 Feb 2026 01:57:21 +0000 (17:57 -0800)]
Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
Linus Torvalds [Tue, 10 Feb 2026 01:31:17 +0000 (17:31 -0800)]
Merge tag 'io_uring-bpf-restrictions.4-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring bpf filters from Jens Axboe:
"This adds support for both cBPF filters for io_uring, as well as task
inherited restrictions and filters.
seccomp and io_uring don't play along nicely, as most of the
interesting data to filter on resides somewhat out-of-band, in the
submission queue ring.
As a result, things like containers and systemd that apply seccomp
filters, can't filter io_uring operations.
That leaves them with just one choice if filtering is critical -
filter the actual io_uring_setup(2) system call to simply disallow
io_uring. That's rather unfortunate, and has limited us because of it.
io_uring already has some filtering support. It requires the ring to
be setup in a disabled state, and then a filter set can be applied.
This filter set is completely bi-modal - an opcode is either enabled
or it's not. Once a filter set is registered, the ring can be enabled.
This is very restrictive, and it's not useful at all to systemd or
containers which really want both broader and more specific control.
This first adds support for cBPF filters for opcodes, which enables
tighter control over what exactly a specific opcode may do. As
examples, specific support is added for IORING_OP_OPENAT/OPENAT2,
allowing filtering on resolve flags. And another example is added for
IORING_OP_SOCKET, allowing filtering on domain/type/protocol. These
are both common use cases. cBPF was chosen rather than eBPF, because
the latter is often restricted in containers as well.
These filters are run post the init phase of the request, which allows
filters to even dip into data that is being passed in struct in user
memory, as the init side of requests make that data stable by bringing
it into the kernel. This allows filtering without needing to copy this
data twice, or have filters etc know about the exact layout of the
user data. The filters get the already copied and sanitized data
passed.
On top of that support is added for per-task filters, meaning that any
ring created with a task that has a per-task filter will get those
filters applied when it's created. These filters are inherited across
fork as well. Once a filter has been registered, any further added
filters may only further restrict what operations are permitted.
Filters cannot change the return value of an operation, they can only
permit or deny it based on the contents"
* tag 'io_uring-bpf-restrictions.4-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: allow registration of per-task restrictions
io_uring: add task fork hook
io_uring/bpf_filter: add ref counts to struct io_bpf_filter
io_uring/bpf_filter: cache lookup table in ctx->bpf_filters
io_uring/bpf_filter: allow filtering on contents of struct open_how
io_uring/net: allow filtering on IORING_OP_SOCKET data
io_uring: add support for BPF filtering for opcode restrictions
Linus Torvalds [Tue, 10 Feb 2026 01:22:00 +0000 (17:22 -0800)]
Merge tag 'for-7.0/io_uring-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Clean up the IORING_SETUP_R_DISABLED and submitter task checking,
mostly just in preparation for relaxing the locking for SINGLE_ISSUER
in the future.
- Improve IOPOLL by using a doubly linked list to manage completions.
Previously it was singly listed, which meant that to complete request
N in the chain 0..N-1 had to have completed first. With a doubly
linked list we can complete whatever request completes in that order,
rather than need to wait for a consecutive range to be available.
This reduces latencies.
- Improve the restriction setup and checking. Mostly in preparation for
adding further features on top of that. Coming in a separate pull
request.
- Split out task_work and wait handling into separate files. These are
mostly nicely abstracted already, but still remained in the
io_uring.c file which is on the larger side.
- Use GFP_KERNEL_ACCOUNT in a few more spots, where appropriate.
- Ensure even the idle io-wq worker exits if a task no longer has any
rings open.
- Add support for a non-circular submission queue.
By default, the SQ ring keeps moving around, even if only a few
entries are used for each submission. This can be wasteful in terms
of cachelines.
If IORING_SETUP_SQ_REWIND is set for the ring when created, each
submission will start at offset 0 instead of where we last left off
doing submissions.
- Various little cleanups
* tag 'for-7.0/io_uring-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (30 commits)
io_uring/kbuf: fix memory leak if io_buffer_add_list fails
io_uring: Add SPDX id lines to remaining source files
io_uring: allow io-wq workers to exit when unused
io_uring/io-wq: add exit-on-idle state
io_uring/net: don't continue send bundle if poll was required for retry
io_uring/rsrc: use GFP_KERNEL_ACCOUNT consistently
io_uring/futex: use GFP_KERNEL_ACCOUNT for futex data allocation
io_uring/io-wq: handle !sysctl_hung_task_timeout_secs
io_uring: fix bad indentation for setup flags if statement
io_uring/rsrc: take unsigned index in io_rsrc_node_lookup()
io_uring: introduce non-circular SQ
io_uring: split out CQ waiting code into wait.c
io_uring: split out task work code into tw.c
io_uring/io-wq: don't trigger hung task for syzbot craziness
io_uring: add IO_URING_EXIT_WAIT_MAX definition
io_uring/sync: validate passed in offset
io_uring/eventfd: remove unused ctx->evfd_last_cq_tail member
io_uring/timeout: annotate data race in io_flush_timeouts()
io_uring/uring_cmd: explicitly disallow cancelations for IOPOLL
io_uring: fix IOPOLL with passthrough I/O
...
Linus Torvalds [Tue, 10 Feb 2026 00:58:28 +0000 (16:58 -0800)]
Merge tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs 'struct filename' updates from Al Viro:
"[Mostly] sanitize struct filename handling"
* tag 'pull-filename' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (68 commits)
sysfs(2): fs_index() argument is _not_ a pathname
alpha: switch osf_mount() to strndup_user()
ksmbd: use CLASS(filename_kernel)
mqueue: switch to CLASS(filename)
user_statfs(): switch to CLASS(filename)
statx: switch to CLASS(filename_maybe_null)
quotactl_block(): switch to CLASS(filename)
chroot(2): switch to CLASS(filename)
move_mount(2): switch to CLASS(filename_maybe_null)
namei.c: switch user pathname imports to CLASS(filename{,_flags})
namei.c: convert getname_kernel() callers to CLASS(filename_kernel)
do_f{chmod,chown,access}at(): use CLASS(filename_uflags)
do_readlinkat(): switch to CLASS(filename_flags)
do_sys_truncate(): switch to CLASS(filename)
do_utimes_path(): switch to CLASS(filename_uflags)
chdir(2): unspaghettify a bit...
do_fchownat(): unspaghettify a bit...
fspick(2): use CLASS(filename_flags)
name_to_handle_at(): use CLASS(filename_uflags)
vfs_open_tree(): use CLASS(filename_uflags)
...
projects / thirdparty / kernel / linux.git / log
