Jay Cornwall [Sat, 23 Jul 2022 09:29:43 +0000 (17:29 +0800)]
drm/amdkfd: Trap handler changes for GC 9.4.3 v2
v1:
Check new exception bits in TRAPSTS register
Remove single step exception workaround, now part of
exception bits
v2:
GC 9.4.3 uses ttmp11 to store {1’b0, dispatch index [24:0],
wave_id_in_workgroup[5:0]}, so use ttmp13 instead of ttmp11 to
preserve ib_sts. (Laurent)
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Signed-off-by: Laurent Morichetti <Laurent.Morichetti@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c: In function ‘dml_rq_dlg_get_dlg_params’:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:991:14: warning: variable ‘scl_enable’ set but not used [-Wunused-but-set-variable]
Get rid of it by removing the variable 'scl_enable'.
Signed-off-by: Caio Novais <caionovais@usp.br> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Amber Lin [Wed, 9 Jun 2021 16:36:35 +0000 (12:36 -0400)]
drm/amdkfd: Set noretry/xnack for GC 9.4.3
For GC 9.4.3, disable retry as default and XNACK can be different
modes per process.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Anthony Koo [Sat, 18 Mar 2023 15:17:16 +0000 (11:17 -0400)]
drm/amd/display: [FW Promotion] Release 0.0.160.0
- New parameter to define extra vblank stretch required when
doing FPO + Vactive
- Pass in pipe index for FPO
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Peichen Huang [Mon, 20 Mar 2023 01:34:23 +0000 (09:34 +0800)]
drm/amd/display: skip CLEAR_PAYLOAD_ID_TABLE if device mst_en is 0
[Why]
Some dock and mst monitor don't like to receive CLEAR_PAYLOAD_ID_TABLE
when mst_en is set to 0. It doesn't make sense to do so in source
side, either.
[How]
Don't send CLEAR_PAYLOAD_ID_TABLE if mst_en is 0
Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 17 Mar 2023 19:18:03 +0000 (15:18 -0400)]
drm/amd/display: Enable FPO optimization
[Description]
Enable optimization for preferring FPO if it achieves
a lower voltage level
Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Fri, 17 Mar 2023 18:08:55 +0000 (14:08 -0400)]
drm/amd/display: Only keep cursor p-state force for FPO
[Description]
If transitioning from an FPO config -> FPO config, we want
to keep cursor P-State force disallowed. Any other transition
from FPO config -> non FPO config should unforce the cursor
P-State disallow
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Artem Grishin [Wed, 15 Mar 2023 22:17:59 +0000 (18:17 -0400)]
drm/amd/display: Conditionally enable 6.75 GBps link rate
[Why]
The 6.75 GBps link rate is part of the new eDP specification
version 1.5 is going to be supported in the future.
Since this standard is very new and there are no existing 6.75 GBps
panels on the market yet, we should put a condition in the driver
on enabling this feature until we can validate it with real hardware.
[How]
- Add boolean flag support_eDP1_5 in struct dc_debug_options.
- Enable the 6.75 link rate in reduce_link_rate(...) only when
the flag is true.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Artem Grishin <Artem.Grishin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ayush Gupta [Thu, 16 Mar 2023 19:57:30 +0000 (15:57 -0400)]
drm/amd/display: fixed dcn30+ underflow issue
[Why]
Observing underflow on dcn30+ system config at 4k144hz
[How]
We set the UCLK hardmax on AC/DC switch if softmax is enabled
and also on boot. While booting up the UCLK Hardmax is set
to softmax before the init sequence and the init sequence
resets the hardmax to UCLK max which enables P-state switching.
Just added a conditional check to avoid setting hardmax on init.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Ayush Gupta <ayugupta@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Wed, 15 Mar 2023 21:40:49 +0000 (17:40 -0400)]
drm/amd/display: Use per pipe P-State force for FPO
[Description]
* Pass in pipe index for FPO cmd to DMCUB
- This change will pass in the pipe index for each stream
that is using FPO
- This change is in preparation to enable FPO + VActive
* Use per pipe P-State force for FPO
- For FPO, instead of using max watermarks value for P-State disallow,
use per pipe p-state force instead
- This is in preparation to enable FPO + VActive
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Sat, 11 Mar 2023 02:18:06 +0000 (21:18 -0500)]
drm/amd/display: update dig enable sequence
[why]
HW delta follow up
Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Tue, 14 Mar 2023 13:27:20 +0000 (09:27 -0400)]
drm/amd/display: fix double memory allocation
[Why & How]
when trying to fix a nullptr dereference on VMs,
accidentally doubly allocated memory for the non VM
case. removed the extra link_srv creation since
dc_construct_ctx is called in both VM and non VM cases
Also added a proper fail check for if kzalloc fails
Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Leo Ma <Hanghong.Ma@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix 4to1 MPC black screen with DPP RCO
[Why]
DPP Root clock optimization when combined with 4to1 MPC combine results
in the screen turning black.
This is because the DPPCLK is stopped during the middle of an
optimize_bandwidth sequence during commit_minimal_transition without
going through plane power down/power up.
[How]
The intent of a 0Hz DPP clock through update_clocks is to disable the
DTO. This differs from the behavior of stopping the DPPCLK entirely
(utilizing a 0Hz clock on some ASIC) so it's better to move this logic
to reside next to plane power up/power down where we gate the HUBP/DPP
DOMAIN.
The new sequence should be:
Power down: PG enabled -> RCO on
Power up: RCO off -> PG disabled
Rename power_on_plane to power_on_plane_resources to reflect the
actual operation that's occurring.
Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Mon, 13 Mar 2023 22:06:34 +0000 (18:06 -0400)]
drm/amd/display: Update FCLK change latency
[Descrtipion]
- Driver hardcoded FCLK P-State latency was incorrect
- Use the value provided by PMFW header instead
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Mon, 13 Mar 2023 16:54:49 +0000 (12:54 -0400)]
drm/amd/display: Enable FPO for configs that could reduce vlevel
[Description]
- On high refresh rate DRR displays that support VBLANK naturally,
UCLK could be idling at DPM1 instead of DPM0 since it doesn't use
FPO
- To achieve DPM0, enable FPO on these configs even though it can
support P-State without FPO
- Default disable for now, have debug option to enable
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add NULL plane_state check for cursor disable logic
[Why]
While scanning the top_pipe connections we can run into a case where
the bottom pipe is still connected to a top_pipe but with a NULL
plane_state.
[How]
Treat a NULL plane_state the same as the plane being invisible for
pipe cursor disable logic.
Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/amdgpu: Remove initialisation of globals to 0 or NULL
Global variables do not need to be initialized to 0 or NULL and checkpatch
flags this error in drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:
ERROR: do not initialise globals to NULL
+char *amdgpu_disable_cu = NULL;
+char *amdgpu_virtual_display = NULL;
Fix this checkpatch error.
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Only build fbdev if DRM_FBDEV_EMULATION is set
Make building fbdev emulation depend on DRM_FBDEV_EMULATION. Also
rename the source file to radeon_fbdev.c to align with other fbdev
files.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement fbdev emulation on top of struct drm_client and its helpers.
Replaces ad-hoc interfaces for restoring and closing fbdev emulation with
per-client callbacks for hotplugging, restoring and unregistering.
A single function, radeon_fbdev_setup(), starts fbdev emulation after
the DRM device has been registered. Hence, fbdev acts like a regular
DRM client.
The setup call prepares the fbdev emulation and invokes connector
hotplugging. The first successful hotplug event initializes fbdev
emulation with a framebuffer, device file, etc.
Unregistering depends on the hotplug status. Fully initialized emulation
is cleaned up through drm_fb_helper_unregister_info() and fb_destroy.
For prepared-only setups, unregistering unprepares the emulation and
releases all resources. In both cases, fbdev emulation will be cleaned
up.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Correctly clean up failed display probing
Improve the fbdev probing function to fully clean up if it failed.
Allows to remove special cases from fb_destroy as well.
This change is reorders the operations within radeonfb_probe(). It
first allocates a buffer object, then builds a DRM framebuffer for
the object and finally creates the fbdev device. If every step
succeeded, the probe function clears the framebuffer memory. This
is the optimal order to rollback any changes if any of the steps
fails.
No functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Move fbdev cleanup code into fb_destroy callback
Fbdev calls struct fb_ops.fb_destroy after cleaning up the final
reference to an fbdev framebuffer. Move radeon's fbdev cleanup code
there.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the coding style in several places in the fbdev-emulation
code. Also rename functions and structure file by comments. No
functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Move fbdev object helpers before struct fb_ops et al
Move the helpers for creating and destroying fbdev GEM objects
to the top of the source file. Makes them available to fb_ops
functions. This will allow to implement framebuffer cleanup in
fb_destroy. No functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Remove test for !screen_base in fbdev probing
The screen_base field comes from the fbdev BO and contains the fbdev
framebuffer base address. We get the BO memory via radeon_bo_kmap(),
which already reports the error -ENOMEM if the buffer could not be
mapped. So remove the later test for screen_base, which will never
be NULL at this point.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both data fields in struct radeon_fbdev, the framebuffer and the
device, are already available in struct drm_fb_helper. Simplify
radeon by converting all callers and removing struct radeon_fbdev.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Look up the framebuffer GEM object in fbdev object test with the
respective helper drm_gem_fb_get_obj(). The look-up helper warns if
no GEM object has been installed. Upcasting types prevents runtime
type checking, so avoid upcast to struct radeon_bo.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/radeon: Move radeon_align_pitch() next to dumb-buffer helpers
Move radeon_align_pitch() next to its caller in the dumb-buffer
code. Removes the only dependency on the radeon's fbdev source file
that is not related to fbdev emulation. No functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/amdgpu: Fix error do not initialise globals to 0
Global variables do not need to be initialized to 0 and checkpatch
flags this error in drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c:
ERROR: do not initialise globals to 0
+int amdgpu_no_queue_eviction_on_vm_fault = 0;
Fix this checkpatch error.
Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Hamza Mahfooz <Hamza.Mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Thu, 23 Mar 2023 05:46:41 +0000 (01:46 -0400)]
drm/amdgpu: Return from switch early for EEPROM I2C address
As soon as control->i2c_address is set, return; remove the "break;" from the
switch--it is unnecessary. This mimics what happens when for some cases in the
switch, we call helper functions with "return <helper function>".
Remove final function "return true;" to indicate that the switch is final and
terminal, and that there should be no code after the switch.
Cc: Candice Li <candice.li@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Luben Tuikov [Thu, 23 Mar 2023 04:56:26 +0000 (00:56 -0400)]
drm/amdgpu: Remove second moot switch to set EEPROM I2C address
Remove second switch since it already has its own function and case in the
first switch. This also avoids requalifying the EEPROM I2C address for VEGA20,
SIENNA CICHLID, and ALDEBARAN, as those have been set by the first switch and
shouldn't match SMU v13.0.x.
Cc: Candice Li <candice.li@amd.com> Cc: Kent Russell <kent.russell@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Fixes: 158225294683 ("drm/amdgpu: Add EEPROM I2C address for smu v13_0_0") Fixes: c9bdc6c3cf39 ("drm/amdgpu: Add EEPROM I2C address support for ip discovery") Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hans de Goede [Sun, 12 Mar 2023 19:17:51 +0000 (20:17 +0100)]
drm/amd/display/amdgpu_dm: Pass proper parent for backlight device registration v3
The parent for the backlight device should be the drm-connector object,
not the PCI device.
Userspace relies on this to be able to detect which backlight class device
to use on hybrid gfx devices where there may be multiple native (raw)
backlight devices registered.
Specifically gnome-settings-daemon expects the parent device to have
an "enabled" sysfs attribute (as drm_connector devices do) and tests
that this returns "enabled" when read.
This aligns the parent of the backlight device with i915, nouveau, radeon.
Note that drivers/gpu/drm/amd/amdgpu/atombios_encoders.c also already
uses the drm_connector as parent, only amdgpu_dm.c used the PCI device
as parent before this change.
Changes in v3:
Make amdgpu_dm_register_backlight_device() check bl_idx != 1 before
registering the backlight since amdgpu_dm_connector_late_register()
now calls it for _all_ connectors.
Changes in v2:
Together with changing the parent, also move the registration to
drm_connector_funcs.late_register() this is necessary because the parent
device (which now is the drm_connector) must be registered before
the backlight class device is, otherwise the backlight class device ends
up without any parent set at all.
This brings the backlight class device registration timing inline with
nouveau and i915 which also use drm_connector_funcs.late_register()
for this.
Note this slightly changes backlight_device_register() error handling,
instead of not increasing dm->num_of_edps and re-using the current
bl_idx for a potential other backlight device, dm->backlight_dev[bl_idx]
is now simply left NULL on failure. This is ok because all code
looking at dm->backlight_dev[i] also checks it is not NULL.
Link: https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/730 Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hans de Goede [Sun, 12 Mar 2023 19:17:50 +0000 (20:17 +0100)]
drm/amd/display/amdgpu_dm: Make amdgpu_dm_register_backlight_device() take an amdgpu_dm_connector
Make amdgpu_dm_register_backlight_device() take an amdgpu_dm_connector
pointer to the connector for which it should register the backlight
as its only argument.
This is a preparation patch for moving the actual backlight class device
registering to drm_connector_funcs.late_register.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hans de Goede [Sun, 12 Mar 2023 19:17:49 +0000 (20:17 +0100)]
drm/amd/display/amdgpu_dm: Move most backlight setup into setup_backlight_device()
Rename register_backlight_device() to setup_backlight_device()
and move all backlight setup related calls from
amdgpu_dm_register_backlight_device() and from
amdgpu_dm_initialize_drm_device() there.
This leaves amdgpu_dm_register_backlight_device() dealing purely
with registering the actual backlight class device.
This is a preparation patch for moving the actual backlight class device
registering to drm_connector_funcs.late_register.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hans de Goede [Sun, 12 Mar 2023 19:17:48 +0000 (20:17 +0100)]
drm/amd/display/amdgpu_dm: Add a bl_idx to amdgpu_dm_connector
Currently functions like update_connector_ext_caps() and
amdgpu_dm_connector_destroy() are iterating over dm->backlight_link[i]
to find the index of the (optional) backlight_dev associated with
the connector.
Instead make register_backlight_device() store the dm->backlight_dev[]
index used for the connector inside the amdgpu_dm_connector struct.
This removes the need to iterate over the dm->backlight_link[]
array and this is necessary as a preparation patch for moving
the actual backlight_device_register()
call to drm_connector_funcs.late_register.
While reworking update_connector_ext_caps() also remove the aconnector
and aconnector->dc_link NULL checks in this function. These are both
never NULL and are unconditionally derefed in its callers.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aric Cyr [Mon, 13 Mar 2023 05:09:20 +0000 (01:09 -0400)]
drm/amd/display: 3.2.228
This DC version brings along:
- Power down eDP if eDP not present
- Set MPC_SPLIT_DYNAMIC for DCN10 and DCN301
- Initialize link_srv in virtual env
- Code cleanup and alignment
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hersen Wu [Thu, 9 Mar 2023 19:43:12 +0000 (14:43 -0500)]
drm/amd/display: align commit_planes_for_stream to latest dc code
[Why & How]
Due to historic issues, commit_planes_for_stream() has grown differently
compared to latest dc code. Apply missed changes to make it aligned.
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hopefully this is fixed by the previous patch to enable
TEMP_DEPENDENT_VMIN for navi1x or otherwise and we can re-enable
MPC_SPLIT_DYNAMIC for DCN 2.0 for better power savings.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Since DC version 3.2.226, DC started to use a new internal commit
sequence that better deals with hardware limitations. Usually, DC adopts
split pipe dynamics to improve the display bandwidth and, in some cases,
to save power. This commit sets MPC_SPLIT_DYNAMIC for DCN301, improving
the bandwidth and fixing the cursor bug on KDE when it tries hardware
rotation.
Since DC version 3.2.226, DC started to use a new internal commit
sequence that better deals with multiple hardware constraints. One of
the improvements is a more reliable sequence for pipe split. Due to the
transition made in version 3.2.226, it should be more reliable to use
the pipe policy as MPC_SPLIT_DYNAMIC, and this commit makes this change.
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
missing change when port to these two dcn version.
Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Leo Ma <hanghong.ma@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Thu, 9 Mar 2023 20:03:50 +0000 (15:03 -0500)]
drm/amd/display: Add CRC and DMUB test support
[Why & How]
- Add CRC for test support
- Add params to allow control into to DMUB.
Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Martin Leung [Fri, 10 Mar 2023 03:42:14 +0000 (22:42 -0500)]
drm/amd/display: initialize link_srv in virtual env
[why]
when refactoring to link_srv, we did not include the
virtual environment case where dc_construct_ctx gets
called instead of dc_construct
[how]
add initialize link_srv to dc_construct_ctx as well
Reviewed-by: Leo Ma <hanghong.ma@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Paul Hsieh [Tue, 7 Mar 2023 13:04:28 +0000 (21:04 +0800)]
drm/amd/display: power down eDP if eDP not present
[Why]
When init, driver will power up eDP to check eDP
present or not. If eDP not present, driver doesn't
power off eDP VDD cause power consumption.
[How]
If eDP is not present when detection, power off eDP
VDD.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Charlene Liu [Thu, 9 Mar 2023 22:05:47 +0000 (17:05 -0500)]
drm/amd/display: update dio for two pixel per container case
[why]
Processing rate of the DP encoder, must be programmed to be the same as
DIG_FIFO_OUTPUT_ PROCESSING_MODE in DP mode
0: 1 pixel per cycle
1: 2 pixel per cycle
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rodrigo Siqueira [Tue, 28 Feb 2023 22:53:10 +0000 (15:53 -0700)]
drm/amd/display: Add const to a function
When calling the dc_link_bw_kbps_from_raw_frl_link_rate_data from
amdgpu_dm, GCC highlighted the following issue:
In function ‘get_conv_frl_bw’:
error: passing argument 1 of
‘dc_link_bw_kbps_from_raw_frl_link_rate_data’ discards ‘const’ qualifier
from pointer target type [-Werror=discarded-qualifiers]
997 | aconnector->dc_link->dc,
This commit fix this issue by making DC a constant variable since we
only use it to invoke the function
bw_kbps_from_raw_frl_link_rate_data().
Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wesley Chalmers [Fri, 3 Mar 2023 19:44:53 +0000 (14:44 -0500)]
drm/amd/display: Make DCN32 3dlut function available to future DCNs
[Why & How]
Make DCN32 3dlut function non-static and thus
available for future DCNs.
Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kai-Heng Feng [Wed, 15 Mar 2023 12:07:23 +0000 (20:07 +0800)]
drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
S2idle resume freeze can be observed on Intel ADL + AMD WX5500. This is
caused by commit 0064b0ce85bb ("drm/amd/pm: enable ASPM by default").
The root cause is still not clear for now.
So extend and apply the ASPM quirk from commit e02fe3bc7aba
("drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems"), to
workaround the issue on Navi cards too.
Fixes: 0064b0ce85bb ("drm/amd/pm: enable ASPM by default") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2458 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Hung [Mon, 6 Mar 2023 03:39:51 +0000 (11:39 +0800)]
drm/amd/display: remove outdated 8bpc comments
[Why]
The commit c76e483cd916 ("drm/amd/display: Don't restrict bpc to 8 bpc")
removes the historical 8bpc dependency and sets max_bpc to 16.
[How]
The comment that states "8bpc for non-edp" needs to be removed as well.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Saaem Rizvi [Mon, 6 Mar 2023 20:10:13 +0000 (15:10 -0500)]
drm/amd/display: Implement workaround for writing to OTG_PIXEL_RATE_DIV register
[Why and How]
Current implementation requires FPGA builds to take a different
code path from DCN32 to write to OTG_PIXEL_RATE_DIV. Now that
we have a workaround to write to OTG_PIXEL_RATE_DIV register without
blanking display on hotplug on DCN32, we can allow the code paths for
FPGA to be exactly the same allowing for more consistent
testing.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawking Zhang [Mon, 20 Mar 2023 09:33:47 +0000 (17:33 +0800)]
drm/amdgpu: Initialize umc ras callback
Fix a coding error which results to null interrupt
handler for umc ras.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Stanley Yang <Stanley.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Fri, 17 Mar 2023 08:17:17 +0000 (08:17 +0000)]
drm/amd/display/dc/link/link_detection: Demote a couple of kerneldoc abuses
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:877: warning: Function parameter or member 'link' not described in 'detect_link_and_local_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:877: warning: Function parameter or member 'reason' not described in 'detect_link_and_local_sink'
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:1232: warning: Function parameter or member 'link' not described in 'dc_link_detect_connection_type'
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lee Jones <lee@kernel.org> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Fri, 17 Mar 2023 08:17:16 +0000 (08:17 +0000)]
drm/amd/display/dc/dce60/Makefile: Fix previous attempt to silence known override-init warnings
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC1_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:188:17: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: warning: initialized field overwritten [-Woverride-init]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:157:21: note: in expansion of macro ‘mmCRTC2_DCFE_MEM_LIGHT_SLEEP_CNTL’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_transform.h:170:9: note: in expansion of macro ‘SRI’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:183:17: note: in expansion of macro ‘XFM_COMMON_REG_LIST_DCE60’
drivers/gpu/drm/amd/amdgpu/../display/dc/dce60/dce60_resource.c:189:17: note: in expansion of macro ‘transform_regs’
drivers/gpu/drm/amd/amdgpu/../include/asic_reg/dce/dce_6_0_d.h:722:43: note: (near initialization for ‘xfm_regs[2].DCFE_MEM_LIGHT_SLEEP_CN
[100 lines snipped for brevity]
Fixes: ceb3cf476a441 ("drm/amd/display/dc/dce60/Makefile: Ignore -Woverride-init warning") Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:2190: warning: Function parameter or member 'link' not described in 'dc_link_is_dp_sink_present'
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Fri, 17 Mar 2023 08:17:13 +0000 (08:17 +0000)]
drm/amd/display/dc/link/protocols/link_dp_capability: Remove unused variable and mark another as __maybe_unused
‘ds_port’ is clearly not used anywhere and ‘result_write_min_hblank’ is
only utilised when debugging is enabled. The alternative would be to
allocate the variable under the same clause as the debugging code, but
that would become very messy, very quickly.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c: In function ‘dp_wa_power_up_0010FA’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:280:42: warning: variable ‘ds_port’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c: In function ‘dpcd_set_source_specific_data’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_capability.c:1296:32: warning: variable ‘result_write_min_hblank’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Fri, 17 Mar 2023 08:17:11 +0000 (08:17 +0000)]
drm/amd/display/dc/link/protocols/link_dp_training: Remove set but unused variable 'result'
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training.c: In function ‘perform_link_training_with_retries’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training.c:1586:38: warning: variable ‘result’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c: In function ‘query_hdcp_capability’:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_detection.c:501:42: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:257: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Zhang <dingchen.zhang@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Fri, 17 Mar 2023 08:17:01 +0000 (08:17 +0000)]
drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move defines out to where they are actually used
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h: At top level:
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:143:22:
warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:140:22:
warning: ‘DP_VGA_LVDS_CONVERTER_ID_3’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:138:22:
warning: ‘DP_VGA_LVDS_CONVERTER_ID_2’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:133:22:
warning: ‘DP_SINK_DEVICE_STR_ID_2’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/../display/include/ddc_service_types.h:132:22:
warning: ‘DP_SINK_DEVICE_STR_ID_1’ defined but not used [-Wunused-const-variable=]
[snip 400 similar lines brevity]
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lee Jones [Fri, 17 Mar 2023 08:17:00 +0000 (08:17 +0000)]
drm/amd/pm/swsmu/smu11/vangogh_ppt: Provide a couple of missing parameter descriptions
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:2381: warning: Function parameter or member 'residency' not described in 'vangogh_get_gfxoff_residency'
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:2399: warning: Function parameter or member 'entrycount' not described in 'vangogh_get_gfxoff_entrycount'
Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Li Ma <li.ma@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / linux.git / log
