When I implemented the storage layer bio splitting, I was under the
assumption that we'll never split metadata bios. But Qu reminded me that
this can actually happen with very old file systems with unaligned
metadata chunks and RAID0.
I still haven't seen such a case in practice, but we better handled this
case, especially as it is fairly easily to do not calling the ->end_іo
method directly in btrfs_end_io_work, and using the proper
btrfs_orig_bbio_end_io helper instead.
In addition to the old file system with unaligned metadata chunks case
documented in the commit log, the combination of the new scrub code
with Johannes pending raid-stripe-tree also triggers this case. We
spent some time debugging it and found that this patch solves
the problem.
Fixes: 103c19723c80 ("btrfs: split the bio submission path into a separate file") CC: stable@vger.kernel.org # 6.3+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a map request is made with securemap attribute, the memory
ownership needs to be reassigned to new VMID to allow access
from protection domain. Currently only DSP VMID is passed to
the reassign call which is incorrect as only a combination of
HLOS and DSP VMID is allowed for memory ownership reassignment
and passing only DSP VMID will cause assign call failure.
Also pass proper restoring permissions to HLOS as the source
permission will now carry both HLOS and DSP VMID permission.
Change is also made to get valid physical address from
scatter/gather for this allocation request.
The maximum VMID for assign_mem is 63. Use a u64 to represent this
bitmap instead of architecture-dependent "unsigned int" which varies in
size on 32-bit and 64-bit platforms.
It turns out the check for module_get_next_page() failing is wrong,
and hence the decompression was not really taking place. Invert
the condition to fix it.
Fixes: 169a58ad824d ("module/decompress: Support zstd in-kernel decompression") Cc: stable@kernel.org Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit 858e8b792d06 ("tpm, tpm_tis: Avoid cache incoherency in test
for interrupts") bit accessor functions are used to access flags in
tpm_tis_data->flags.
However these functions expect bit numbers, while the flags are defined
as bit masks in enum tpm_tis_flag.
Fix this inconsistency by using numbers instead of masks also for the
flags in the enum.
Reported-by: Pavel Machek <pavel@denx.de> Fixes: 858e8b792d06 ("tpm, tpm_tis: Avoid cache incoherency in test for interrupts") Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Cc: stable@vger.kernel.org Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When running on an AMD vIOMMU, we observed multiple invalidations (of
decreasing power of 2 aligned sizes) when unmapping a single page.
Domain flush takes gather bounds (end-start) as size param. However,
gather->end is defined as the last inclusive address (start + size - 1).
This leads to an off by 1 error.
With this patch, verified that 1 invalidation occurs when unmapping a
single page.
Fixes: a270be1b3fdf ("iommu/amd: Use only natural aligned flushes in a VM") Cc: stable@vger.kernel.org # >= 5.15 Signed-off-by: Jon Pan-Doh <pandoh@google.com> Tested-by: Sudheer Dantuluri <dantuluris@google.com> Suggested-by: Gary Zibrat <gzibrat@google.com> Reviewed-by: Vasant Hegde <vasant.hegde@amd.com> Acked-by: Nadav Amit <namit@vmware.com> Link: https://lore.kernel.org/r/20230426203256.237116-1-pandoh@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The scsi driver function sd_read_block_characteristics() always calls
disk_set_zoned() to a disk zoned model correctly, in case the device
model changed. This is done even for regular disks to set the zoned
model to BLK_ZONED_NONE and free any zone related resources if the drive
previously was zoned.
This behavior significantly impact the time it takes to revalidate disks
on a large system as the call to disk_clear_zone_settings() done from
disk_set_zoned() for the BLK_ZONED_NONE case results in the device
request queued to be frozen, even if there are no zone resources to
free.
Avoid this overhead for non-zoned devices by not calling
disk_clear_zone_settings() in disk_set_zoned() if the device model
was already set to BLK_ZONED_NONE, which is always the case for regular
devices.
Reported by: Brian Bunker <brian@purestorage.com>
Fixes: 508aebb80527 ("block: introduce blk_queue_clear_zone_settings()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20230529073237.1339862-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The init counter is not decremented on initialisation errors, which
prevents retrying initialisation and can lead to the runtime suspend
callback attempting to disable resources that have never been enabled.
Add the missing decrement on initialisation errors so that the counter
reflects the state of the device.
When compiling on a MIPS 64-bit machine we get these warnings:
In file included from ./arch/mips/include/asm/cacheflush.h:13,
from ./include/linux/cacheflush.h:5,
from ./include/linux/highmem.h:8,
from ./include/linux/bvec.h:10,
from ./include/linux/blk_types.h:10,
from ./include/linux/blkdev.h:9,
from fs/btrfs/disk-io.c:7:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c:100:34: error: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Werror=array-bounds]
100 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:2135:48: note: in definition of macro ‘page_address’
2135 | #define page_address(page) lowmem_page_address(page)
| ^~~~
cc1: all warnings being treated as errors
We can check if i overflows to solve the problem. However, this doesn't make
much sense, since i == 1 and num_pages == 1 doesn't execute the body of the loop.
In addition, i < num_pages can also ensure that buf->pages[i] will not cross
the boundary. Unfortunately, this doesn't help with the problem observed here:
gcc still complains.
To fix this add a compile-time condition for the extent buffer page
array size limit, which would eventually lead to eliminating the whole
for loop.
CC: stable@vger.kernel.org # 5.10+ Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
LPUART IP now has two known bugs, one is that CTS has higher priority
than the break signal, which causes the break signal sending through
UARTCTRL_SBK may impacted by the CTS input if the HW flow control is
enabled. It exists on all platforms we support in this driver.
So we add a workaround patch for this issue: commit c4c81db5cf8b
("tty: serial: fsl_lpuart: disable the CTS when send break signal").
Another IP bug is i.MX8QM LPUART may have an additional break character
being sent after SBK was cleared. It may need to add some delay between
clearing SBK and re-enabling CTS to ensure that the SBK latch are
completely cleared.
But we found that during the delay period before CTS is enabled, there
is still a risk that Bluetooth data in TX FIFO may be sent out during
this period because of break off and CTS disabled(even if BT sets CTS
line deasserted, data is still sent to BT).
Due to this risk, we have to drop the CTS-disabling workaround for SBK
bugs, use TXINV seems to be a better way to replace SBK feature and
avoid above risk. Also need to disable the transmitter to prevent any
data from being sent out during break, then invert the TX line to send
break. Then disable the TXINV when turn off break and re-enable
transmitter.
Fixes: c4c81db5cf8b ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chapter "5.3 Power-Up/Down Sequence" of WILC1000 [1] and WILC3000 [2]
states that CHIP_EN must be pulled HIGH first, RESETN second. Fix the
order of these signals in the driver.
Use the mmc_pwrseq_ops as driver data as the delay between signals is
specific to SDIO card type anyway.
We may get an empty response with zero length at the beginning of
the driver start and get following UBSAN error. Since there is no
content(SDRT_NONE) for the response, just return and skip the response
handling to avoid this problem.
Test pass : SDIO wifi throughput test with this patch
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk for renoir.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels are
given the reversed orders by PMFW. Like the memory DPM clocks
that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch reverses the DPM clocks levels output of pp_dpm_mclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For devices not attached to a port multiplier and managed directly by
libata, the device number passed to ata_find_dev() must always be lower
than the maximum number of devices returned by ata_link_max_devices().
That is 1 for SATA devices or 2 for an IDE link with master+slave
devices. This device number is the SCSI device ID which matches these
constraints as the IDs are generated per port and so never exceed the
maximum number of devices for the link being used.
However, for libsas managed devices, SCSI device IDs are assigned per
struct scsi_host, leading to device IDs for SATA devices that can be
well in excess of libata per-link maximum number of devices. This
results in ata_find_dev() to always return NULL for libsas managed
devices except for the first device of the target scsi_host with ID
(device number) equal to 0. This issue is visible by executing the
hdparm utility, which fails. E.g.:
hdparm -i /dev/sdX
/dev/sdX:
HDIO_GET_IDENTITY failed: No message of desired type
Fix this by rewriting ata_find_dev() to ignore the device number for
non-PMP attached devices with a link with at most 1 device, that is SATA
devices. For these, the device number 0 is always used to
return the correct pointer to the struct ata_device of the port link.
This change excludes IDE master/slave setups (maximum number of devices
per link is 2) and port-multiplier attached devices. Also, to be
consistant with the fact that SCSI device IDs and channel numbers used
as device numbers are both unsigned int, change the devno argument of
ata_find_dev() to unsigned int.
Reported-by: Xingui Yang <yangxingui@huawei.com> Fixes: 41bda9c98035 ("libata-link: update hotplug to handle PMP links") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc 13 may assign another type to enumeration constants than gcc 12. Split
the large enum at the top of source file stex.c such that the type of the
constants used in time expressions is changed back to the same type chosen
by gcc 12. This patch suppresses compiler warnings like this one:
In file included from ./include/linux/bitops.h:7,
from ./include/linux/kernel.h:22,
from drivers/scsi/stex.c:13:
drivers/scsi/stex.c: In function ‘stex_common_handshake’:
./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror]
12 | (void)(&__dummy == &__dummy2); \
| ^~
./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’
106 | typecheck(unsigned long, b) && \
| ^~~~~~~~~
drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’
1035 | if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
| ^~~~~~~~~~
See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405.
Cc: stable@vger.kernel.org Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The channel's rpmsg object allows new invocations to be made. After old
invocations are already interrupted, the driver shouldn't try to invoke
anymore. Invalidating the rpmsg at the end of the driver removal
function makes it easy to cause a race condition in userspace. Even
closing a file descriptor before the driver finishes its cleanup can
cause an invocation via fastrpc_release_current_dsp_process() and
subsequent timeout.
Invalidate the channel before the invocations are interrupted to make
sure that no invocations can be created to hang after the device closes.
Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20230523152550.438363-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value is initialized as -1, or -EPERM. The completion of an
invocation implies that the return value is set appropriately, but
"Permission denied" does not accurately describe the outcome of the
invocation. Set the invocation's return value to a more appropriate
"Broken pipe", as the cleanup breaks the driver's connection with rpmsg.
The userspace map request for remote heap allocates CMA memory.
The ownership of this memory needs to be reassigned to proper
owners to allow access from the protection domain running on
DSP. This reassigning of ownership is not correct if done for
any other supported flags.
When any other flag is requested from userspace, fastrpc is
trying to reassign the ownership of memory and this reassignment
is getting skipped for remote heap request which is incorrect.
Add proper flag check to reassign the memory only if remote heap
is requested.
'end_sector' is compared to 'rdev->recovery_offset', which is offset to
rdev, however, commit e82ed3a4fbb5 ("md/raid6: refactor
raid5_read_one_chunk") changes the calculation of 'end_sector' to offset
to the array. Fix this miscalculation.
Fixes: e82ed3a4fbb5 ("md/raid6: refactor raid5_read_one_chunk") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230524014118.3172781-1-yukuai1@huaweicloud.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While exercising the unbind path, with the current implementation
the functionfs_unbind would be calling which waits for the ffs->mutex
to be available, however within the same time ffs_ep0_read is invoked
& if no setup packets are pending, it will invoke function
wait_event_interruptible_exclusive_locked_irq which by definition waits
for the ev.count to be increased inside the same mutex for which
functionfs_unbind is waiting.
This creates deadlock situation because the functionfs_unbind won't
get the lock until ev.count is increased which can only happen if
the caller ffs_func_unbind can proceed further.
Expected speed should be bigger than 300Mbits/sec.
The root cause of this performance drop was found to be data corruption
happening at 4K borders in some Ethernet packets, leading to TCP
checksum errors. This corruption occurs from the position
(4K - (address & 0x7F)) to 4K. The u_ether function's allocation of
skb_buff reserves 64B, meaning all RX addresses resemble 0xXXXX0040.
Commit 28d1a7ac2a0d ("iio: dac: Add AD5758 support") adds the config AD5758
and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver
is however included when AD5755 is selected, not when AD5758 is selected.
Probably, this was simply a mistake that happened by copy-and-paste and
forgetting to adjust the actual line. Surprisingly, no one has ever noticed
that this driver is actually only included when AD5755 is selected and that
the config AD5758 has actually no effect on the build.
The AD7192 provides a specific channel configuration where both negative
and positive inputs are connected to AIN2. This was represented in the
ad7192 driver as a IIO channel with .channel = 2 and .extended_name set
to "shorted".
The problem with this approach, is that the driver provided two IIO
channels with the identifier .channel = 2; one "shorted" and the other
not. This goes against the IIO ABI, as a channel identifier should be
unique.
Address this issue by changing "shorted" channels to being differential
instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs.
itself.
Note that the fix tag is for the commit that moved the driver out of
staging. The bug existed before that, but backporting would become very
complex further down and unlikely to happen.
Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Co-developed-by: Alisa Roman <alisa.roman@analog.com> Signed-off-by: Alisa Roman <alisa.roman@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230330102100.17590-1-paul@crapouillou.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka
1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively
equivalent to the IIO_CHAN_INFO_RAW case, and we never call
ad74413r_adc_to_resistance_result() to convert the adc measurement to
ohms.
Check ret for being negative rather than non-zero.
The i2c_master_send() returns number of sent bytes on success,
or negative on error. The suspend/resume callbacks expect zero
on success and non-zero on error. Adapt the return value of the
i2c_master_send() to the expectation of the suspend and resume
callbacks, including proper validation of the return value.
The Sigma-Delta ADCs supported by this driver can use SDO as an interrupt
line to indicate the completion of a conversion. However, some devices
cannot properly detect the completion of a conversion by an interrupt.
This is for the reason mentioned in the following commit.
commit e9849777d0e2 ("genirq: Add flag to force mask in
disable_irq[_nosync]()")
A read operation is performed by an extra interrupt before the completion
of a conversion. At this time, the value read from the ADC data register
is the same as the previous conversion result. This patch fixes the issue
by setting IRQ_DISABLE_UNLAZY flag.
The fwnode_irq_get_byname() was returning 0 at device-tree mapping
error. If this occurred, the KX022A driver did abort the probe but
errorneously directly returned the return value from
fwnode_irq_get_byname() from probe. In case of a device-tree mapping
error this indicated success.
The fwnode_irq_get_byname() has since been fixed to not return zero on
error so the check for fwnode_irq_get_byname() can be relaxed to only
treat negative values as errors. This will also do decent fix even when
backported to branches where fwnode_irq_get_byname() can still return
zero on error because KX022A probe should later fail at IRQ requesting
and a prober error handling should follow.
Relax the return value check for fwnode_irq_get_byname() to only treat
negative values as errors.
Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230501143605.1615549-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Timestamp reset is not done in the correct place. It must be done
before enabling buffer. The reason is that interrupt timestamping
is always happening when the chip is on, even if the
corresponding sensor is off. When the sensor restarts, timestamp
is wrong if you don't do a reset first.
If high bit is set to 1 in ((data[3] & 0x0f << 28), after all arithmetic
operations and integer promotions are done, high bits in
wacom->serial[idx] will be filled with 1s as well.
Avoid this, albeit unlikely, issue by specifying left operand's __u64
type for the right operand.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
The scale value of ibus and ibat on the datasheet is incorrect due to the
customer report after the experimentation with some specific vendor ID
chips.
The ad4130 driver registers a clock provider, but never removes it. This
leaves a stale clock provider behind that references freed clocks when the
device is unbound.
Register a managed action to remove the clock provider when the device is
removed.
The tmag5273 gets a runtime PM reference before reading a measurement and
releases it when done. But if the measurement fails the tmag5273_read_raw()
function exits before releasing the reference.
Make sure that this error path also releases the runtime PM reference.
the order of three init operation:
1.mxs_lradc_adc_trigger_init
2.iio_triggered_buffer_setup
3.mxs_lradc_adc_hw_init
thus, the order of three cleanup operation should be:
1.mxs_lradc_adc_hw_stop
2.iio_triggered_buffer_cleanup
3.mxs_lradc_adc_trigger_remove
we exchange the order of two cleanup operations,
introducing the following differences:
1.if mxs_lradc_adc_trigger_init fails, returns directly;
2.if trigger_init succeeds but iio_triggered_buffer_setup fails,
goto err_trig and remove the trigger.
In addition, we also reorder the unwind that goes on in the
remove() callback to match the new ordering.
Fixes: 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver") Signed-off-by: Jiakai Luo <jkluo@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When apply_acpi_orientation() fails, st_accel_common_probe() will fall back
to iio_read_mount_matrix(), which checks for a mount-matrix device property
and if that is not set falls back to the identity matrix.
But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode
does not have a "_ONT" method apply_acpi_orientation() was returning 0,
causing iio_read_mount_matrix() to never get called resulting in an
invalid mount_matrix:
Since the event-filter-function.tc expects the 'exit_mmap()' directly
calls 'kmem_cache_free()', this is vulnerable to code modifications.
Choose the target function for the filter test from the sample
event data so that it can keep test running correctly even if the caller
function name will be changed.
When the uvcvideo driver encounters a format descriptor with an unknown
format GUID, it creates a corresponding struct uvc_format instance with
the fcc field set to 0. Since commit 50459f103edf ("media: uvcvideo:
Remove format descriptions"), the driver relies on the V4L2 core to
provide the format description string, which the V4L2 core can't do
without a valid 4CC. This triggers a WARN_ON.
As a format with a zero 4CC can't be selected, it is unusable for
applications. Ignore the format completely without creating a uvc_format
instance, which fixes the warning.
Add rs485-rts-active-high property, this was removed by mistake.
In general we just use rs485-rts-active-low property, however the OMAP
UART for legacy reason uses the -high one.
Fixes: 767d3467eb60 ("dt-bindings: serial: 8250_omap: drop rs485 properties") Closes: https://lore.kernel.org/all/ZGefR4mTHHo1iQ7H@francesco-nb.int.toradex.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230531111038.6302-1-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Until commit 5c2712387d48 ("cacheinfo: Fix LLC is not exported through
sysfs"), cacheinfo called populate_cache_leaves() for CPU coming online
which let the arch specific functions handle (at least on x86)
populating the shared_cpu_map. However, with the changes in the
aforementioned commit, populate_cache_leaves() is not called when a CPU
comes online as a result of hotplug since last_level_cache_is_valid()
returns true as the cacheinfo data is not discarded. The CPU coming
online is not present in shared_cpu_map, however, it will not be added
since the cpu_cacheinfo->cpu_map_populated flag is set (it is set in
populate_cache_leaves() when cacheinfo is first populated for x86)
This can lead to inconsistencies in the shared_cpu_map when an offlined
CPU comes online again. Example below depicts the inconsistency in the
shared_cpu_list in cacheinfo when CPU8 is offlined and onlined again on
a 3rd Generation EPYC processor:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
Clear the flag when the CPU is removed from shared_cpu_map when
cache_shared_cpu_map_remove() is called during CPU hotplug. This will
allow cache_shared_cpu_map_setup() to add the CPU coming back online in
the shared_cpu_map. Set the flag again when the shared_cpu_map is setup.
Following are results of performing the same test as described above with
the changes:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
While building the shared_cpu_map, check if the cache level and cache
type matches. On certain systems that build the cache topology based on
the instance ID, there are cases where the same ID may repeat across
multiple cache levels, leading inaccurate topology.
In event of CPU offlining, the cache_shared_cpu_map_remove() does not
consider if IDs at same level are being compared. As a result, when same
IDs repeat across different cache levels, the CPU going offline is not
removed from all the shared_cpu_map.
Below is the output of cache topology of CPU8 and it's SMT sibling after
CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor
(2 x 64C/128T) running kernel release v6.3:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of
index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the
SMT siblings, and they have the same cache instance ID, CPU 2 is only
removed from the first index with matching ID which is index1 (L1i) in
this case. With this fix, the results are as expected when performing
the same experiment on the same system:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
When rebuilding topology, the same problem appears as
cache_shared_cpu_map_setup() implements a similar logic. Consider the
same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1
and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on
the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from
Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs
sharing one cache domain. This went undetected since x86 processors
depended on arch specific populate_cache_leaves() method to repopulate
the shared_cpus_map when CPU came back online until kernel release
v6.3-rc5.
Fixes: 198102c9103f ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels") Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20230508084115.1157-2-kprateek.nayak@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When VCODEC_CAPABILITY_4K_DISABLED is not set in dec_capability, skip
formats that are not MTK_FMT_DEC so only decoder formats is updated in
mtk_init_vdec_params.
Fixes: e25528e1dbe5 ("media: mediatek: vcodec: Use 4K frame size when supported by stateful decoder") Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The preorder callback on the kvm_pgtable_stage2_map() path can replace
a table with a block, then recursively free the detached table. The
higher-level walking logic stashes the old page table entry and
then walks the freed table, invoking the leaf callback and
potentially freeing pgtable pages prematurely.
In normal operation, the call to tear down the detached stage-2
is indirected and uses an RCU callback to trigger the freeing.
RCU is not available to pKVM, which is where this bug is
triggered.
Change the behavior of the walker to reload the page table entry
after invoking the walker callback on preorder traversal, as it
does for leaf entries.
Tested on Pixel 6.
Fixes: 5c359cca1faf ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make") Suggested-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Fuad Tabba <tabba@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230522103258.402272-1-tabba@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
After commit b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG"), the cpuc->pebs_data_cfg may save some bits that are not
supported by real hardware, such as PEBS_UPDATE_DS_SW. This would cause
the VMX hardware MSR switching mechanism to save/restore invalid values
for PEBS_DATA_CFG MSR, thus crashing the host when PEBS is used for guest.
Fix it by using the active host value from cpuc->active_pebs_data_cfg.
Fixes: b752ea0c28e3 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230517133808.67885-1-likexu@tencent.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When target mode is enabled, the pci_irq_get_affinity() function may return
a NULL value in qla_mapq_init_qp_cpu_map() due to the qla24xx_enable_msix()
code that handles IRQ settings for target mode. This leads to a crash due
to a NULL pointer dereference.
This patch fixes the issue by adding a check for the NULL value returned by
pci_irq_get_affinity() and introducing a 'cpu_mapped' boolean flag to the
qla_qpair structure, ensuring that the qpair's CPU affinity is updated when
it has not been mapped to a CPU.
Fixes: 1d201c81d4cc ("scsi: qla2xxx: Select qpair depending on which CPU post_cmd() gets called") Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev> Link: https://lore.kernel.org/r/56b416f2-4e0f-b6cf-d6d5-b7c372e3c6a2@scst.dev Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since host stage-2 mappings are created lazily, we cannot rely solely on
the pte in order to recover the target physical address when checking a
host-initiated memory transition as this permits donation of unmapped
regions corresponding to MMIO or "no-map" memory.
Instead of inspecting the pte, move the addr_is_allowed_memory() check
into the host callback function where it is passed the physical address
directly from the walker.
Cc: Quentin Perret <qperret@google.com> Fixes: e82edcc75c4e ("KVM: arm64: Implement do_share() helper for sharing memory") Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230518095844.1178-1-will@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Note that the current report, which can be triggered by the vgic_irq
kselftest, is a triple chain that includes slots_lock, but after
inverting the slots_lock/config_lock dependency, the actual problem
reported above remains.
In several places, the vgic code calls kvm_io_bus_register_dev(), which
synchronizes the srcu, while holding config_lock (#1). And the MMIO
handler takes the config_lock while holding the srcu read lock (#0).
Break dependency #1, by registering the distributor and redistributors
without holding config_lock. The ITS also uses kvm_io_bus_register_dev()
but already relies on slots_lock to serialize calls.
The distributor iodev is created on the first KVM_RUN call. Multiple
threads will race for vgic initialization, and only the first one will
see !vgic_ready() under the lock. To serialize those threads, rely on
slots_lock rather than config_lock.
Redistributors are created earlier, through KVM_DEV_ARM_VGIC_GRP_ADDR
ioctls and vCPU creation. Similarly, serialize the iodev creation with
slots_lock, and the rest with config_lock.
Fixes: f00327731131 ("KVM: arm64: Use config_lock to protect vgic state") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230518100914.2837292-2-jean-philippe@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
ret = vref_uv = regulator_get_voltage(adc->vref);
if (ret < 0)
The "ret" variable is type long and "vref_uv" is u32 so that means
the condition can never be true on a 64bit system. A negative error
code from regulator_get_voltage() would be cast to a high positive
u32 value and then remain a high positive value when cast to a long.
The "ret" variable only ever stores ints so it should be declared as
an int. We can delete the "vref_uv" variable and use "ret" directly.
User should not be able to write block device if it is read-only at
block level (e.g force_ro attribute). This is ensured in the regular
fops write operation (blkdev_write_iter) but not when writing via
user mapping (mmap), allowing user to actually write a read-only
block device via a PROT_WRITE mapping.
Example: This can lead to integrity issue of eMMC boot partition
(e.g mmcblk0boot0) which is read-only by default.
To fix this issue, simply deny shared writable mapping if the block
is readonly.
Note: Block remains writable if switch to read-only is performed
after the initial mapping, but this is expected behavior according
to commit a32e236eb93e ("Partially revert "block: fail op_is_write()
requests to read-only partitions"")'.
Add a quirk for Teamgroup MP33 that reports duplicate ids for disk.
Signed-off-by: Daniel Smith <dansmith@ds.gy>
[kch: patch formatting] Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Tested-by: Daniel Smith <dansmith@ds.gy> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When handling UBLK_IO_FETCH_REQ, ctx->uring_lock is grabbed first, then
ub->mutex is acquired.
When handling UBLK_CMD_STOP_DEV or UBLK_CMD_DEL_DEV, ub->mutex is
grabbed first, then calling io_uring_cmd_done() for canceling uring
command, in which ctx->uring_lock may be required.
Real deadlock only happens when all the above commands are issued from
same uring context, and in reality different uring contexts are often used
for handing control command and IO command.
Fix the issue by using io_uring_cmd_complete_in_task() to cancel command
in ublk_cancel_dev(ublk_cancel_queue).
When performing device unbind or halt, we have disabled all irqs at the
very begining like amdgpu_pci_remove or amdgpu_device_halt. So
amdgpu_irq_put for irqs stored in fence driver should not be called
any more, otherwise, below calltrace will arrive.
When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:
net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]
Add another #ifdef to leave these out of the build.
Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
If a userspace application performes a "delete_controller" command
early during the ctrl initialization, the delete operation
may race against the init code and the kernel will crash.
Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit;
if it's not set it means that the nvme controller is still
in the process of getting initialized and the kernel
will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl()
function, after the controller start operation is completed.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
| ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
‘any_addr’ defined but not used [-Werror=unused-const-variable=]
2979 | static const union nf_inet_addr any_addr;
| ^~~~~~~~
These variables use is controlled by CONFIG_NF_NAT, so should their definitions.
Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[ 12.764776] PM: Some devices failed to suspend, or early wake event detected
Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
clang warns about an unpacked structure inside of a packed one:
drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.
As Michael noted, the same problem is present in b43legacy, so
change both at the same time.
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target,
scsi_queue_rq() would return BLK_STS_RESOURCE and the related request would
be requeued. The timeout of this request would not fire, no one would
increase iodone_cnt.
The above flow would result the iodone_cnt smaller than iorequest_cnt. So
decrease the iorequest_cnt if dispatch failed to workaround the issue.
Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Reported-by: Ming Lei <ming.lei@redhat.com> Closes: https://lore.kernel.org/r/ZF+zB+bB7iqe0wGd@ovpn-8-17.pek2.redhat.com Link: https://lore.kernel.org/r/20230515070156.1790181-3-haowenchao2@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The transfer command descriptor is allocated in ufshcd_memory_alloc() and
referenced by the transfer request descriptor with stride size
sizeof_utp_transfer_cmd_desc() instead of sizeof(struct
utp_transfer_cmd_desc).
Consequently, computing tag by address offset should also refer to the
same stride.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com> Link: https://lore.kernel.org/r/20230504154454.26654-2-powen.kao@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rs_drv_get_rate flow reads the lq_sta to return the optimal rate
for tx frames. This read flow is not protected thereby leaving
a small window, a few instructions wide, open to contention by an
asynchronous rate update. Indeed this race condition was hit and the
update occurred in the middle of the read.
Fix this by locking the lq_sta struct during read.
When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updated. This leads to strange situations, especially
in link switching where you switch to an 80 MHz link and expect
it to be active immediately, but the mindef is still configured
to 20 MHz while assigning. Also, it's strange that the chandef
passed to the assign method's argument is wider than the one in
the context.
Fix this by calculating the mindef with the new link considered
before calling the driver.
In particular, this fixes an iwlwifi problem during link switch
where the firmware would assert because the (link) station that
was added for the AP is configured to transmit at a bandwidth
that's wider than the channel context that it's configured on.
When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.
Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.
Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.
There's no need to call ieee80211_recalc_chanctx_min_def()
since it cannot and won't call the driver anyway; just use
_ieee80211_recalc_chanctx_min_def() instead.
Like the other calls in this function virt_to_page() expects
a pointer, not an integer.
However since many architectures implement virt_to_pfn() as
a macro, this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).
When using rtl8192cu with rtl8xxxu driver to connect wifi, there is a
probability of failure, which shows "authentication with ... timed out".
Through debugging, it was found that the RCR register has been inexplicably
modified to an incorrect value, resulting in the nic not being able to
receive authenticated frames.
To fix this problem, add regrcr in rtl8xxxu_priv struct, and store
the RCR value every time the register is written, and use it the next
time the register need to be modified.
The pointer to IPL Parameter Information Block is stored
in the absolute lowcore for later use by dump tools. That
pointer is a virtual address, though it should be physical
instead.
Note, this does not fix a real issue, since virtual and
physical addresses are currently the same.
When SMT thread CPUs are added to CPU masks the nr_cpu_ids
limit is not checked and could be exceeded. This leads to
a warning for example if CONFIG_DEBUG_PER_CPU_MAPS is set
and the command line parameter nr_cpus is set to 1.
Key blobs for the IOCTLs PKEY_KBLOB2PROTK[23] may contain clear key
material. Zeroize the copies of these keys in kernel memory after
creating the protected key.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If there are failures in DSP runtime resume, the device state will not
reach active and this makes it impossible e.g. to retrieve a possible
DSP panic dump via "exception" debugfs node. If
CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE=y is set, the data in
cache is stale. If debugfs cache is not used, the region simply cannot
be read.
To allow debugging these scenarios, update the debugfs cache contents in
resume error handler. User-space can then later retrieve DSP panic and
other state via debugfs (requires SOF debugfs cache to be enabled in
build).
Reported-by: Curtis Malainey <cujomalainey@chromium.org Link: https://github.com/thesofproject/linux/issues/4274 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Reviewed-by: Curtis Malainey <cujomalainey@chromium.org Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512104638.21376-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
When a firmware IPC error happens during a pm_runtime suspend, we
ignore the error and suspend anyways. However, the code
unconditionally increases the runtime_pm counter. This results in a
confusing configuration where the code will suspend, resume but never
suspend again due to the use of pm_runtime_get_noresume().
The intent of the counter increase was to prevent entry in D3, but if
that transition to D3 is already started it cannot be stopped. In
addition, there's no point in that case in trying to prevent anything,
the firmware error is handled and the next resume will re-initialize
the firmware completely.
This patch changes the logic to prevent suspend when the device is
pm_runtime active and has a use_count > 0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20230512103315.8921-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Using a semaphore in the wait_event*() condition is no good idea.
It hits a kernel WARN_ON() at prepare_to_wait_event() like:
do not call blocking ops when !TASK_RUNNING; state=1 set at
prepare_to_wait_event+0x6d/0x690
For avoiding the potential deadlock, rewrite to an open-coded loop
instead. Unlike the loop in wait_event*(), this uses wait_woken()
after the condition check, hence the task state stays consistent.
projects / thirdparty / kernel / stable.git / log
