The recent split of Realtek HD-audio driver forced users to choose the
right Kconfigs, but most users have no idea which ones to enable.
Although the distros tend to enable all of them, individual users may
have their own favorites and miss something needed via the version
upgrade.
For smoother upgrade path from the previous kernel configuration, now
we take the following changes:
- CONFIG_SND_HDA_CODEC_REALTEK (which is a menuconfig) is changed from
bool to tristate again, so that it can take over from the previous
config gracefully.
- CONFIG_SND_HDA_CODEC_ALC* receive "default y", so that they are
enabled as default as long as CONFIG_SND_HDA_CODEC_REALTEK is set.
Those can be still disabled if users want to reduce the size, too.
At least this allows users to run "make oldconfig" and push RETURN
blindly.
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
During communication with Focusrite Scarlett Gen 2/3/4 USB audio
interfaces, -EPROTO is sometimes returned from scarlett2_usb_tx(),
snd_usb_ctl_msg() which can cause initialisation and control
operations to fail intermittently.
This patch adds up to 5 retries in scarlett2_usb(), with a delay
starting at 5ms and doubling each time. This follows the same approach
as the fix for usb_set_interface() in endpoint.c (commit f406005e162b
("ALSA: usb-audio: Add retry on -EPROTO from usb_set_interface()")),
which resolved similar -EPROTO issues during device initialisation,
and is the same approach as in fcp.c:fcp_usb().
Mark Brown [Thu, 24 Jul 2025 22:17:01 +0000 (23:17 +0100)]
ASoC: fsl_xcvr: get channel status data in two cases
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There is two different cases for getting channel status data:
1. With PHY exists, there is firmware running on M core, the firmware
should fill the channel status to RAM space, driver need to read them
from RAM.
2. Without PHY, the channel status need to be obtained from registers.
Mark Brown [Thu, 24 Jul 2025 21:09:30 +0000 (22:09 +0100)]
More minor SDCA changes
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
A small chain with some patches that seem to have got lost in the
process. One small additional bug fix for the regmap callbacks, and one
small feature addition for the control parsing.
Charles Keepax (2):
ASoC: SDCA: Fix some holes in the regmap readable/writeable helpers
ASoC: SDCA: Add support for -cn- value properties
Merge tag 'asoc-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.17
There's a few new drivers here and quite a lot of cleanup work from
Morimoto-san but generally this has been quite a quiet release,
resulting in a fairly small diffstat. Highlights include:
- Refactoring of the Kconfig menus to be hopefully more consistant and
easier to navigate.
- Refactoring of the DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers.
- Removal of the unused upstream weak paths DAPM functionality.
- Further work on the generic handling for SoundWire SDCA devices.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
Shengjiu Wang [Thu, 10 Jul 2025 03:04:05 +0000 (11:04 +0800)]
ASoC: fsl_xcvr: get channel status data with firmware exists
For the XCVR module on i.MX95, even though it only supports SPDIF, the
channel status needs to be obtained from RAM space, which is processed
by firmware. Firmware is necessary to trigger the FSL_XCVR_IRQ_NEW_CS
interrupt.
This change also applies for the SPDIF & ARC function on i.MX8MP which
has the firmware.
Shengjiu Wang [Thu, 10 Jul 2025 03:04:04 +0000 (11:04 +0800)]
ASoC: fsl_xcvr: get channel status data when PHY is not exists
There is no PHY for the XCVR module on i.MX93, the channel status needs
to be obtained from FSL_XCVR_RX_CS_DATA_* registers. And channel status
acknowledge (CSA) bit should be set once channel status is processed.
Charles Keepax [Fri, 18 Jul 2025 13:54:32 +0000 (14:54 +0100)]
ASoC: SDCA: Add support for -cn- value properties
Many of the DisCo properties that specify Control values have an
additional variant that specifies a separate value for each Control
Number. Add support for these.
Charles Keepax [Fri, 18 Jul 2025 13:54:31 +0000 (14:54 +0100)]
ASoC: SDCA: Fix some holes in the regmap readable/writeable helpers
The current regmap readable/writeable helper functions always
allow the Next flag and allows any Control Number. Mask the Next
flag based on SDCA_ACCESS_MODE_DUAL which is the only Mode that
supports it. Also check that the Control Number is valid for
the given control.
Johan Hovold [Tue, 22 Jul 2025 09:25:42 +0000 (11:25 +0200)]
ASoC: mediatek: common: fix device and OF node leak
Make sure to drop the references to the accdet OF node and platform
device taken by of_parse_phandle() and of_find_device_by_node() after
looking up the sound component during probe.
Fixes: cf536e2622e2 ("ASoC: mediatek: common: Handle mediatek,accdet property") Cc: stable@vger.kernel.org # 6.15 Cc: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20250722092542.32754-1-johan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA: hda/realtek: Fix mute LED mask on HP OMEN 16 laptop
this patch is to fix my previous Commit <e5182305a519> i have fixed mute
led but for by This patch corrects the coefficient mask value introduced
in commit <e5182305a519>, which was intended to enable the mute LED
functionality. During testing, multiple values were evaluated, and
an incorrect value was mistakenly included in the final commit.
This update fixes that error by applying the correct mask value for
proper mute LED behavior.
Charles Keepax [Tue, 22 Jul 2025 11:47:05 +0000 (12:47 +0100)]
ASoC: SDCA: Fix implicit cast from le16
As the HID wDescriptorLength is explicitly marked as little endian it
should be converted to host endian before being used.
Fixes: ac558015dfd8 ("ASoC: SDCA: add a HID device for HIDE entity") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507221024.M18hWD6q-lkp@intel.com/ Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250722114705.2816910-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stephen Rothwell [Tue, 22 Jul 2025 10:27:54 +0000 (11:27 +0100)]
ASoC: SDCA: Check devm_mutex_init() return value
Fix interaction with commit daec29dcc873 ("locking/mutex: Mark
devm_mutex_init() as __must_check"), add return value check. There is no
need for additional complex error handling here, failure to init the
mutex means the code can't progress, so the failure just needs to be passed
up to the caller.
The mutexes qdev_mutex and chip->mutex are acquired in that order
throughout the driver. To preserve proper lock hierarchy and avoid
potential deadlocks, they must be released in the reverse
order of acquisition.
This change reorders the unlock sequence to first release chip->mutex
followed by qdev_mutex, ensuring consistency with the locking pattern.
[ fixed the code indentations and Fixes tag by tiwai ]
Shuming Fan [Mon, 21 Jul 2025 11:23:46 +0000 (19:23 +0800)]
ASoC: SDCA: add route by the number of input pins in MU entity
This patch removed the code where num_sources should be the same as cn_list.
For better resilience, it would be preferable to explicitly add the route
mapping the input pins to this MU entity.
The glitch was detected in the high frequency of the HP playback.
This patch adjusts the DAC dither setting to avoid this situation
for almost all cases.
ALSA: hda/realtek - Add mute LED support for HP Pavilion 15-eg0xxx
The mute LED on the HP Pavilion Laptop 15-eg0xxx,
which uses the ALC287 codec, didn't work.
This patch fixes the issue by enabling the ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on a physical device, the LED now works as intended.
ASoC: mediatek: mt8365-dai-i2s: pass correct size to mt8365_dai_set_priv
Given mt8365_dai_set_priv allocate priv_size space to copy priv_data which
means we should pass mt8365_i2s_priv[i] or "struct mtk_afe_i2s_priv"
instead of afe_priv which has the size of "struct mt8365_afe_private".
Fixes: 402bbb13a195 ("ASoC: mediatek: mt8365: Add I2S DAI support") Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/20250710011806.134507-1-guoqing.jiang@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
Merge tag 'asoc-fix-v6.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large set of changes, but most of them are quirk
information for various x86 systems. There is one more substantial fix
for a NULL pointer dereference when removing the AVS driver, plus one
for Kconfig dependencies.
Mark Brown [Wed, 16 Jul 2025 17:33:28 +0000 (18:33 +0100)]
Add SDCA DAI ops helpers
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
First, a couple of minor code fixups to already submitted code. Then
some patches to add new DAI ops helpers for the SDCA stuff, these allow
configuring things like the sample rate and finding out which SoundWire
port should be used for a specific SDCA streaming input/output terminal.
Still a few bits of outstanding work here (propogation of Cluster
information particularly) but his should be good enough to get some
basic use-cases working.
Hopefully we are getting fairly close to completing a first version of
the SDCA work now. Should be one more series to add FDL (firmware
downloading), then we should be able to send a first version of the
actual SDCA class driver itself.
Balamurugan C [Wed, 16 Jul 2025 08:23:00 +0000 (16:23 +0800)]
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
Added match table entry on ptl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
Device variants use different amount of clock inputs, but all of them
are in the same order, 'clock-names' in top-level properties can define
the list and each if:then: block can only narrow the number of items.
This is preferred syntax, because it keeps list unified among devices
and encourages adding new entries to the end of the list, instead of
adding them in the middle. The change has no functional impact, but
partially reverts approach implemented in commit cfad817095e1 ("ASoC:
dt-bindings: qcom,lpass-va-macro: Add missing NPL clock").
Mark Brown [Tue, 15 Jul 2025 21:40:13 +0000 (22:40 +0100)]
SDCA Bug Fixes
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Some small SDCA bug fixes reported from various sources. An array bounds
check, an uninitialised variable and some memory allocations that should
zero initialise.
Charles Keepax (3):
ASoC: SDCA: Fix off by one error in IRQ bound check
ASoC: SDCA: Avoid use of uninitialised local name variable
ASoC: SDCA: Update memory allocations to zero initialise
Mark Brown [Tue, 15 Jul 2025 20:44:05 +0000 (21:44 +0100)]
ASoC: convert from clk round_rate() to
Merge series from Brian Masney <bmasney@redhat.com>:
The round_rate() clk ops is deprecated in the clk framework in favor
of the determine_rate() clk ops, so let's go ahead and convert the
drivers in the rtc subsystem using the Coccinelle semantic patch
posted below. I did a few minor cosmetic cleanups of the code in a
few cases.
Coccinelle semantic patch:
virtual patch
// Look up the current name of the round_rate function
@ has_round_rate @
identifier round_rate_name =~ ".*_round_rate";
identifier hw_param, rate_param, parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
...
}
// Rename the route_rate function name to determine_rate()
@ script:python generate_name depends on has_round_rate @
round_rate_name << has_round_rate.round_rate_name;
new_name;
@@
// Coccinelle only transforms the first occurrence of the rate parameter
// Run a second time. FIXME: Is there a better way to do this?
@ chg_rate2 depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
- rate_param
+ req->rate
...>
}
// Change parent_rate to req->best_parent_rate
@ chg_parent_rate depends on generate_name @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
@@
long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
unsigned long *parent_rate_param)
{
<...
(
- *parent_rate_param
+ req->best_parent_rate
|
- parent_rate_param
+ &req->best_parent_rate
)
...>
}
// Convert the function definition from round_rate() to determine_rate()
@ func_definition depends on chg_rate @
identifier has_round_rate.round_rate_name;
identifier has_round_rate.hw_param;
identifier has_round_rate.rate_param;
identifier has_round_rate.parent_rate_param;
identifier generate_name.new_name;
@@
- long round_rate_name(struct clk_hw *hw_param, unsigned long rate_param,
- unsigned long *parent_rate_param)
+ int new_name(struct clk_hw *hw, struct clk_rate_request *req)
{
...
}
// Update the ops from round_rate() to determine_rate()
@ ops depends on func_definition @
identifier has_round_rate.round_rate_name;
identifier generate_name.new_name;
@@
Note that I used coccinelle 1.2 instead of 1.3 since the newer version
adds unnecessary braces as described in this post.
https://lore.kernel.org/cocci/67642477-5f3e-4b2a-914d-579a54f48cbd@intel.com/
Charles Keepax [Mon, 7 Jul 2025 12:41:55 +0000 (13:41 +0100)]
ASoC: SDCA: Add hw_params() helper function
Add a helper function that can be called from hw_params() in the DAI ops
to configure the SDCA Cluster, Clock and Usage controls. These setup the
channels, sample rate, and bit depths that will be used by the Terminal.
Charles Keepax [Mon, 7 Jul 2025 12:41:54 +0000 (13:41 +0100)]
ASoC: SDCA: Add a helper to get the SoundWire port number
Add a helper function to extract the SoundWire hardware port number
from the SDCA DataPort Selector Control. Typically this would be
called from hw_params() and used to call sdw_stream_add_slave().
Charles Keepax [Mon, 7 Jul 2025 12:41:53 +0000 (13:41 +0100)]
ASoC: SDCA: Add helper to add DAI constraints
Currently the core SDCA code simply creates a place holder available
channels from 1 to SDCA_MAX_CHANNEL_COUNT. Add a helper function
that will constrain the number of channels based on the actual
available SDCA Clusters in DisCo. Currently this code only handles
Input Terminal Entities as they directly specify the Cluster. More
work will be required later for Output Terminals which inherit their
Cluster. Typically this new helper would be called from the DAIs
startup callback.
Charles Keepax [Mon, 7 Jul 2025 12:41:52 +0000 (13:41 +0100)]
ASoC: soc-dai: Add private data to snd_soc_dai
Add a private data pointer that can be used to store context along
with the DAI. This will be useful to allow the SDCA class library to
store data separately from the CODEC driver itself.
Charles Keepax [Mon, 7 Jul 2025 12:41:51 +0000 (13:41 +0100)]
ASoC: SDCA: Move SDCA search functions and export
The ASoC code for SDCA contains several helper functions that search for
controls/ranges/etc. As the code evolves these helpers are likely to be
useful to anything interacting with the stored DisCo data. Move the
helpers into sdca_function.c and export them so other modules can also
use them.
Charles Keepax [Mon, 7 Jul 2025 12:41:49 +0000 (13:41 +0100)]
ASoC: SDCA: Allow read-only controls to be deferrable
The current SDCA Control parsing only checks the deferrable flag for
Read/Write and Dual Ranked controls. However, reads can defer as well as
writes so Read Only controls should also check for the deferrable flag.
Add the handling for this into find_sdca_entity_control().
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev> Link: https://patch.msgid.link/20250707124155.2596744-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Tue, 15 Jul 2025 15:17:23 +0000 (16:17 +0100)]
ASoC: SDCA: Update memory allocations to zero initialise
All the memory allocations in the SDCA ASoC helpers rely on fields being
zero initialised, the code should use kzalloc not kmalloc.
Reported-by: Shuming Fan <shumingf@realtek.com> Fixes: 2c8b3a8e6aa8 ("ASoC: SDCA: Create DAPM widgets and routes from DisCo") Fixes: c3ca24e3fcb6 ("ASoC: SDCA: Create ALSA controls from DisCo") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250715151723.2964336-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
Brian Masney [Thu, 10 Jul 2025 15:51:12 +0000 (11:51 -0400)]
ASoC: stm: stm32_sai_sub: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:51:11 +0000 (11:51 -0400)]
ASoC: stm: stm32_i2s: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:51:10 +0000 (11:51 -0400)]
ASoC: qcom: qdsp6: q6dsp-lpass-clocks: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:51:09 +0000 (11:51 -0400)]
ASoC: codecs: rt5682s: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:51:08 +0000 (11:51 -0400)]
ASoC: codecs: rt5682: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Brian Masney [Thu, 10 Jul 2025 15:51:07 +0000 (11:51 -0400)]
ASoC: codecs: da7219: convert from round_rate() to determine_rate()
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX
The Lenovo Yoga Book 9i GenX has the wrong values in the cirrus,dev-index
_DSD property. Add a fixup for this model to ignore the property and
hardcode the index from the I2C bus address.
The error in the cirrus,dev-index property would prevent the second amp
instance from probing. The component binding would never see all the
required instances and so there would not be a binding between
patch_realtek.c and the cs35l56 driver.
Mark Brown [Mon, 14 Jul 2025 10:34:16 +0000 (11:34 +0100)]
ASoC: codec: Convert to GPIO descriptors for
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
(A) sets dapm->bias_level, but (B) is not.
I think we should set it on both (A) and (B).
I think it is miss or bug, but Samsung is the only vendor that feels a
problem about this.
I think this patch (= [1/5]) is correct approach, but some non-samsung
vendor might get affect from this patch-set, so I added [RFC] on this
patch-set.
Furthermore, (B) cares both Card and Component, (A) cares Component only.
I guess it is the reason why it is called as "force" bias_level function.
(A) is used from each drivers, (B) is used from soc-dapm only.
I'm not 100% sure though, except special cases, each driver should use (B),
I guess ?
Shengjiu Wang [Tue, 8 Jul 2025 08:53:17 +0000 (16:53 +0800)]
ASoC: fsl-asoc-card: add sysclk_ratio for calculate sysclk frequency
The sysclk frequency can be calculated from sample rate multiply ratio.
When sysclk_freq is not configured, but sysclk_ratio is configured, then
calculate sysclk frequency according to sysclk_ratio.
Peng Fan [Thu, 10 Jul 2025 12:40:03 +0000 (20:40 +0800)]
ASoC: codec: tlv320aic32x4: Convert to GPIO descriptors
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor, and set consumer
name.
- Use gpiod_set_value to configure output value.
While at here, reorder the included headers.
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-3-2233b272a1a6@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
Peng Fan [Thu, 10 Jul 2025 12:40:01 +0000 (20:40 +0800)]
ASoC: codec: tlv320aic32x4: Drop aic32x4_pdata usage
There is no machine is using aic32x4_pdata as platform_data, so
remove the dead code.
Cc: Markus Niebel <Markus.Niebel@ew.tq-group.com> Cc: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patch.msgid.link/20250710-asoc-gpio-1-v2-1-2233b272a1a6@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed
ASoC has 2 functions to set bias level.
(A) snd_soc_dapm_force_bias_level()
(B) snd_soc_dapm_set_bias_level()
snd_soc_dapm_force_bias_level() (A) will set dapm->bias_level (a) if
successed.
(A) int snd_soc_dapm_force_bias_level(...)
{
...
if (ret == 0)
(a) dapm->bias_level = level;
...
}
snd_soc_dapm_set_bias_level() (B) is also a function that sets bias_level.
It will call snd_soc_dapm_force_bias_level() (A) inside, but doesn't
set dapm->bias_level by itself. One note is that (A) might not be called.
(B) static int snd_soc_dapm_set_bias_level(...)
{
...
ret = snd_soc_card_set_bias_level(...);
...
if (dapm != &card->dapm)
(A) ret = snd_soc_dapm_force_bias_level(...);
...
ret = snd_soc_card_set_bias_level_post(...);
...
}
dapm->bias_level will be set if (A) was called, but might not be set
if (B) was called, even though it calles set_bias_level() function.
We should set dapm->bias_level if we calls
snd_soc_dapm_set_bias_level() (B), too.
Charles Keepax [Fri, 11 Jul 2025 10:06:16 +0000 (11:06 +0100)]
ASoC: SDCA: Pull HID and IRQ into the primary SDCA module
If the HID or the IRQ are selected as options they will always require
loading alongside the main SDCA module. Since it will never be possible
to run without them the value of keeping them as separate modules is
fairly limited. Pull them into the main SDCA module to simplify things
still further.
It is currently possible to configure a kernel with all Intel SoC
configs as loadable modules, but the board config as built-in. This
causes a link failure in the reference to the snd_soc_sof.ko module:
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'
Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever
the SOF support is in a loadable module, none of the board code can be built-in.
This may be be a little heavy-handed, but I also don't see a reason why one would
want the boards to be built-in but not the SoC, so it shouldn't actually cause
any usability problems.
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Fixes for a few clk drivers and bindings:
- Add a missing property to the Mediatek MT8188 clk binding to
keep binding checks happy
- Avoid an OOB by setting the correct number of parents in
dispmix_csr_clk_dev_data
- Allocate clk_hw structs early in probe to avoid an ordering
issue where clk_parent_data points to an unallocated clk_hw
when the child clk is registered before the parent clk in the
SCMI clk driver
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
Merge tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a case of recursive locking in the MSI code
- Fix a randconfig build failure in armada-370-xp irqchip
* tag 'irq_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Fix build with PCI disabled
PCI/MSI: Prevent recursive locking in pci_msix_write_tph_tag()
Merge tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
Merge tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Fix for a cache aliasing issue by adding missing flush_dcache_folio(),
which causes execution failures on some arm32 setups.
Fix for large compressed fragments, which could be generated by
-Eall-fragments option (but should be rare) and was rejected by
mistake due to an on-disk hardening commit.
The remaining ones are small fixes. Summary:
- Address cache aliasing for mappable page cache folios
- Allow readdir() to be interrupted
- Fix large fragment handling which was errored out by mistake
- Add missing tracepoints
- Use memcpy_to_folio() to replace copy_to_iter() for inline data"
* tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix large fragment handling
erofs: allow readdir() to be interrupted
erofs: address D-cache aliasing
erofs: use memcpy_to_folio() to replace copy_to_iter()
erofs: fix to add missing tracepoint in erofs_read_folio()
erofs: fix to add missing tracepoint in erofs_readahead()
Merge tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix use after free in lease break
- small fix for freeing rdma transport (fixes missing logging of
cm_qp_destroy)
- fix write count leak
* tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential use-after-free in oplock/lease break ack
ksmbd: fix a mount write count leak in ksmbd_vfs_kern_path_locked()
smb: server: make use of rdma_destroy_qp()
Merge tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- Track apple Root Ports explicitly and look up the driver data from
the struct device instead of using dev->driver_data, which is used by
pci_host_common_init() for the generic host bridge pointer (Marc
Zyngier)
- Set dev->driver_data before pci_host_common_init() calls
gen_pci_init() because some drivers need it to set up ECAM mappings;
this fixes a regression on MicroChip MPFS Icicle (Geert Uytterhoeven)
- Revert the now-unnecessary use of ECAM pci_config_window.priv to
store a copy of dev->driver_data (Marc Zyngier)
* tag 'pci-v6.16-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
Revert "PCI: ecam: Allow cfg->priv to be pre-populated from the root port device"
PCI: host-generic: Set driver_data before calling gen_pci_init()
PCI: apple: Add tracking of probed root ports
Core Changes:
- fix race in gem_handle_create_tail
- fixup handle_count fb refcount regression from -rc5, popular with
reports ...
- call rust dtor for drm_device release
Driver Changes:
- nouveau: magic 50ms suspend fix, acpi leak fix
- tegra: dma api error in nvdec
- pvr: fix device reset
- habanalbs maintainer update
- intel display: fix some dsi mipi sequences
- xe fixes: SRIOV fixes, small GuC fixes, disable indirect ring due
to issues, compression fix for fragmented BO, doc update
* tag 'drm-fixes-2025-07-12' of https://gitlab.freedesktop.org/drm/kernel: (22 commits)
drm/xe/guc: Default log level to non-verbose
drm/xe/bmg: Don't use WA 16023588340 and 22019338487 on VF
drm/xe/guc: Recommend GuC v70.46.2 for BMG, LNL, DG2
drm/xe/pm: Correct comment of xe_pm_set_vram_threshold()
drm/xe: Release runtime pm for error path of xe_devcoredump_read()
drm/xe/pm: Restore display pm if there is error after display suspend
drm/i915/bios: Apply vlv_fixup_mipi_sequences() to v2 mipi-sequences too
drm/gem: Fix race in drm_gem_handle_create_tail()
drm/framebuffer: Acquire internal references on GEM handles
agp/amd64: Check AGP Capability before binding to unsupported devices
drm/xe/bmg: fix compressed VRAM handling
Revert "drm/xe/xe2: Enable Indirect Ring State support for Xe2"
drm/xe: Allocate PF queue size on pow2 boundary
drm/xe/pf: Clear all LMTT pages on alloc
drm/nouveau/gsp: fix potential leak of memory used during acpi init
rust: drm: remove unnecessary imports
MAINTAINERS: Change habanalabs maintainer
drm/imagination: Fix kernel crash when hard resetting the GPU
drm/tegra: nvdec: Fix dma_alloc_coherent error check
rust: drm: device: drop_in_place() the drm::Device in release()
...
I haven't figured out what the actual bug in this commit is, but I did
spend a lot of time chasing it down and eventually succeeded in
bisecting it down to this.
For some reason, this eventpoll commit ends up causing delays and stuck
user space processes, but it only happens on one of my machines, and
only during early boot or during the flurry of initial activity when
logging in.
I must be triggering some very subtle timing issue, but once I figured
out the behavior pattern that made it reasonably reliable to trigger, it
did bisect right to this, and reverting the commit fixes the problem.
Of course, that was only after I had failed at bisecting it several
times, and had flailed around blaming both the drm people and the
netlink people for the odd problems. The most obvious of which happened
at the time of the first graphical login (the most common symptom being
that some gnome app aborted due to a 30s timeout, often leading to the
whole session then failing if it was some critical component like
gnome-shell or similar).
Acked-by: Nam Cao <namcao@linutronix.de> Cc: Frederic Weisbecker <frederic@kernel.org> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / thirdparty / kernel / linux.git / log
