Detect availability of pthread_rwlock_timedwrlock() before using it.
(closes issue #14930)
Reported by: tilghman
Patches:
20090420__bug14930.diff.txt uploaded by tilghman (license 14)
Tested by: mvanbaak, tilghman
Jeff Peeler [Wed, 22 Apr 2009 19:20:53 +0000 (19:20 +0000)]
Make chan_h323 respect packetization settings
Previously, packetization settings were ignored and now they are not. A new
config option 'autoframing' has been added to mirror the way chan_sip handles
it. Turning on the autoframing option (available both as a global option or per
peer) overrides the local settings with the remote packetization settings.
Testing was performed with varying packetization levels with the following
codecs: ulaw, alaw, gsm, and g729.
(closes issue #12415)
Reported by: pj
Patches:
2009012200_h323packetization.diff.txt uploaded by mvanbaak (license 7),
modified by me
Add check in configure script to check for GLOB_NOMAGIC and GLOB_BRACE in glob.h
This allows config.c to compile when linked against uclibc that does not support these parameters
Add a workaround for func_odbc/ARRAY() for problems that occur with certain special characters.
In certain cases, due to the way Set() works in 1.4, values may not get set
properly. This is a workaround for 1.4 only that corrects for these issues,
without making func_odbc more difficult to use properly.
(closes issue #14614)
Reported by: wdoekes
Patches:
20090309__bug14614__2.diff.txt uploaded by tilghman (license 14)
double_set_unescape_workaround_for_func_odbc.osso-and-tilghman-1.diff uploaded by wdoekes (license 717)
Tested by: wdoekes, tilghman
Sean Bright [Mon, 20 Apr 2009 20:58:39 +0000 (20:58 +0000)]
Properly handle @s within hints in AEL.
AEL was not handling the case of a device hint containing an @ symbol, which
caused parking hints (e.g. hint(park:exten@context)) to error out the parser.
This patch makes AEL treat the @ the same way it treats colon and ampersand
now, meaning the characters are included in verbatim.
Clean up problem with manager implementation of mmap where it was not testing against MAP_FAILED response.
Got rid of shadowed variable used in processign the mmap results.
Change test of mmap results to compare against MAP_FAILED
David Vossel [Sat, 18 Apr 2009 01:27:19 +0000 (01:27 +0000)]
Fixed autologoff in agents.conf not working when agent logs in via AgentLogin app
An agent logs in by calling an extension that calls the AgentLogin app. In agents.conf ackcall=always is set, so when they get a call they have the choice to either acknowledge it or ignore it. autologoff=10 is set as well, so if the agent ignores the call over 10sec one may assume that the agent should be logged out (and in this case hungup on as well), but this was not happening.
Fix a bug where a value used to create the channel name was bogus.
This commit fixes the scenario where an incoming call is authenticated
using a peer entry. Previously the channel name was created using either
the username setting from the sip.conf entry or the IP address that the
call came from. Now the channel name will be created using the peer name
itself. This commit will not change the way the channel name is generated
for users or friends.
(closes issue #14256)
Reported by: Nick_Lewis
Patches:
chan_sip.c-chname.patch uploaded by Nick (license 657)
Tested by: Nick_Lewis, file
David Vossel [Wed, 15 Apr 2009 22:08:40 +0000 (22:08 +0000)]
National prefix inserted even when caller ID not available
When the caller ID is restricted, the expected behavior is for the caller id to be blank. In chan_dahdi, the national prefix is placed onto the callers number even if its restricted (empty) causing the caller id to be the national prefix rather than blank.
David Vossel [Tue, 14 Apr 2009 15:02:04 +0000 (15:02 +0000)]
audio_audiohook_write_list() does not correctly update sample size after ast_translate.
audio_audiohook_write_list() does not take into account that the sample size may change after translation depending on if the original frame is is 8khz or 16khz. While no 16kz codecs are supported in 1.4 at the moment, this will save headaches in the future if they ever are. the sample size is now updated after translating to reflect this possibility. Thanks to jcolp and mmichelson for helping me work this out.
Mark Michelson [Thu, 9 Apr 2009 18:51:20 +0000 (18:51 +0000)]
Handle a SIP race condition (reinvite before an ACK) properly.
RFC 5047 explains the proper course of action to take if a
reINVITE is received before the ACK from a previous invite
transaction. What we are to do is to treat the reINVITE as
if it were both an ACK and a reINVITE and process it normally.
Later, when we receive the ACK we had been expecting, we will
ignore it since its CSeq is less than the current iseqno of
the sip_pvt representing this dialog.
Race condition between ast_cli_command() and 'module unload' could cause a deadlock.
Add lock timeouts to avoid this potential deadlock.
(closes issue #14705)
Reported by: jamessan
Patches:
20090320__bug14705.diff.txt uploaded by tilghman (license 14)
Tested by: jamessan
Backport resolution for file descriptor leak in 1.6.0 to 1.4.
This fixes short reads in http manager sessions, such as those done by the
ast-gui branch. (Fixes AST-198)
Mark Michelson [Wed, 8 Apr 2009 16:52:03 +0000 (16:52 +0000)]
Fix a small logical error when loading moh classes.
We were unconditionally incrementing the number of mohclasses
registered. However, we should actually only increment if the
call to moh_register was successful.
While this probably has never caused problems, I noticed it
and decided to fix it anyway.
Mark Michelson [Wed, 8 Apr 2009 15:26:46 +0000 (15:26 +0000)]
Make a couple of changes with regards to a new message printed in ast_read().
"ast_read() called with no recorded file descriptor" is a new message added
after a bug was discovered. Unfortunately, it seems there are a bunch of places
that potentially make such calls to ast_read() and trigger this error message
to be displayed. This commit does two things to help to make this message appear
less.
First, the message has been downgraded to a debug level message if dev mode is
not enabled. The message means a lot more to developers than it does to end users,
and so developers should take an effort to be sure to call ast_read only when
a channel is ready to be read from. However, since this doesn't actually cause an
error in operation and is not something a user can easily fix, we should not spam
their console with these messages.
Second, the message has been moved to after the check for any pending masquerades.
ast_read() being called with no recorded file descriptor should not interfere with
a masquerade taking place.
This could be seen as a simple way of resolving issue #14723. However, I still want
to try to clear out the existing ways of triggering this message, since I feel that
would be a better resolution for the issue.
Fix a bug where DAHDI/Zaptel channels would not properly switch formats when requested
Don't offer AST_FORMAT_SLINEAR on DAHDI/Zaptel channels... while it could provide a slight performance benefit, the translation core in Asterisk has some flaws when a channel driver offers multiple raw formats. this fix is much simpler than fixing the translation core to solve that issue (although that will be done later).
Distinguish in a sent email between simple sends and forwards.
(closes issue #11678)
Reported by: jamessan
Patches:
20090330__bug11678.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, lmadsen
Russell Bryant [Fri, 3 Apr 2009 01:57:44 +0000 (01:57 +0000)]
Fix a memory leak in cdr_radius.
I came across this while doing some testing of my ast_channel_ao2 branch.
After running a test overnight that generated over 5 million calls, Asterisk
had taken up about 1 GB of my system memory. So, I re-ran the test with
MALLOC_DEBUG turned on. However, it showed no leaks in Asterisk during the
test, even though Asterisk was still consuming it somehow.
Instead, I turned to valgrind, which when run with --leak-check=full, told
me exactly where the leak came from, which was from allocations inside the
radiusclient-ng library. This explains why MALLOC_DEBUG did not report it.
After a bit of analysis, I found that we were leaking a little bit of memory
every time a CDR record was passed to cdr_radius.
I don't actually have a radius server set up to receive CDR records. However,
I always have my development systems compile and install all modules. In
addition to making sure there are not build errors across modules, always
loading modules helps find bugs like this, too, so it is strongly recommend for
all developers.
the DAHDI_GETCONF, DAHDI_SETCONF and DAHDI_GET_PARAMS ioctls were recently corrected to show that they do, in fact, read data from userspace as part of their work. due to this fix, valgrind now reports a number of cases where chan_dahdi passed an uninitialized (or partially) buffer to these ioctls, which could lead to unexpected behavior.
this patch corrects chan_dahdi to ensure that buffers passed to these ioctls are always fully initialized.
David Vossel [Wed, 1 Apr 2009 19:02:00 +0000 (19:02 +0000)]
Fixes issue with dropped calles due to re-Invite glare and re-Invites never executing after a 491
Acknowledgement for 491 responses were never being processed because it didn't match our pending invite's seqno. Since the ACK was never processed, the 491 frame would continue to be retransmitted until eventually the call was dropped due to max retries. Now during a pending invite, if we receive another invite, we send an 491 and hold on to that glare invite's seqno in the "glareinvite" variable for that sip_pvt struct. When ACK's are received, we first check to see if it is in response to our pending invite, if not we check to see if it is in response to a glare invite. In this case, it is in response to the glare invite and must be dealt with or the call is dropped. I've changed the wait time for resending the re-Invite after receving a 491 response to comply with RFC 3261. Before this patch the scheduled re-Invite would only change a flag indicating that the re-Invite should be sent out, now it actually sends it out as well.
Russell Bryant [Wed, 1 Apr 2009 13:47:30 +0000 (13:47 +0000)]
Fix a case where DTMF could bypass audiohooks.
This change fixes a situation where an audiohook that wants DTMF would not
actually get it. This is in the code path where we end DTMF digit length
emulation while handling a NULL frame.
David Brooks [Tue, 31 Mar 2009 16:37:12 +0000 (16:37 +0000)]
Fix incorrect parsing in chan_gtalk when xmpp contains extra whitespaces
To drill into the xmpp to find the capabilities between channels, chan_gtalk
calls iks_child() and iks_next(). iks_child() and iks_next() are functions in
the iksemel xml parsing library that traverse xml nodes. The bug here is that
both iks_child() and iks_next() will return the next iks_struct node
*regardless* of type. chan_gtalk expects the next node to be of type IKS_TAG,
which in most cases, it is, but in this case (a call being made from the
Empathy IM client), there exists iks_struct nodes which are not IKS_TAG data
(they are extraneous whitespaces), and chan_gtalk doesn't handle that case,
so capabilities don't match, and a call cannot be made.
iks_first_tag() and iks_next_tag(), on the other hand, will not return the
very next iks_struct, but will check to see if the next iks_struct is of
type IKS_TAG. If it isn't, it will be skipped, and the next struct of type
IKS_TAG it finds will be returned. This assures that chan_gtalk will find
the iks_struct it is looking for.
This fix simply changes all calls to iks_child() and iks_next() to become
calls to iks_first_tag() and iks_next_tag(), which resolves the capability
matching.
The following is a payload listing from Empathy, which, due to the extraneous
whitespace, will not be parsed correctly by iksemel:
Mark Michelson [Tue, 31 Mar 2009 15:34:05 +0000 (15:34 +0000)]
Fix some state_interface stuff that was in trunk but not in the backport to 1.4.
Issue #14359 was fixed between the time that I posted the review of the backport
of the state interface change for 1.4. This merges the changes from that issue
back into 1.4.
Richard Mudgett [Mon, 30 Mar 2009 20:38:11 +0000 (20:38 +0000)]
Make chan_misdn BRI TE side normally defer channel selection to the NT side.
Channel allocation collisions are not handled by chan_misdn very well.
This patch simply avoids the problem for BRI only.
For PRI, allocation collisions are still possible but less likely since
there are simply more channels available and each end could use a different
allocation strategy.
misdn.conf options available:
te_choose_channel - Use to force the TE side to allocate channels.
method - Specify the channel allocation strategy.
Mark Michelson [Mon, 30 Mar 2009 16:17:35 +0000 (16:17 +0000)]
Fix queue weight behavior so that calls in low-weight queues are not inappropriately blocked.
(This is copied and pasted from the review request I made for this patch)
Asterisk has some odd behavior when queue weights are used. The current logic used when
potentially calling a queue member is:
If the member we are going to call is part of another queue and _that other queue has any
callers in it_ and has a higher weight than the queue we are calling from, then don't try
to contact that member. The issue here is what I have marked with underscores. If the
higher-weighted queue has any callers in it at all, then the queue member will be unreachable
from the lower-weighted queue. This has the potential to be really really bad if using a
queue strategy, such as leastrecent or fewestcalls, with the potential to call the same
member repeatedly.
The fix proposed by garychen on issue 13220 is very simple and, as far as I can see, works
well for this situation. With this set of changes, the logic used becomes:
If the member we are going to call is part of another queue, the other queue has a higher
weight than the queue we are calling from, and the higher weight queue has at least as many
callers as available members, then do not try to contact the queue member. If the higher
weighted queue has fewer callers than available members, then there is no reason to deny
the call to this member since the other queue can afford to spare a member.
Since the fix involved writing a generic function for determining the number of available
members in the queue, I also modified the is_our_turn function to make use of the new
num_available_members function to determine if it is our turn to try calling a member. There
is one small behavior change. Before writing this patch, if you had autofill disabled, then
if you were the head caller in a queue, you would automatically be told that it was your
turn to try calling a member. This did not take into account whether there were actually any
queue members available to take the call. Now we actually make sure there is at least one
member available to take the call if autofill is disabled.
Mark Michelson [Mon, 30 Mar 2009 15:23:59 +0000 (15:23 +0000)]
Backport state interface changes to app_queue from trunk.
After several issues raised on the Asterisk bugtracker against
the 1.4 branch were determined to be fixable with the state interface
change available in the 1.6.X series, it finally came time to just
suck it up and backport the change.
For a detailed explanation of what this change entails, the original
trunk commit for this feature may be found here:
In addition, the details for the use of this change to fix the problems
stated in issue #12970 may be found in the review request I made for
this change. It is linked below.
Joshua Colp [Mon, 30 Mar 2009 14:35:47 +0000 (14:35 +0000)]
Improve our handling of T38 in the initial INVITE from a device.
We now answer with matching media streams to what is requested. If an INVITE
is received with both a T38 and RTP media stream this means we answer with both.
For any outgoing calls created as a result of this inbound one no T38 is requested
in the initial INVITE. Instead if we start receiving udptl packets we trigger a
reinvite on the outbound side.
Joshua Colp [Fri, 27 Mar 2009 13:06:45 +0000 (13:06 +0000)]
Fix an issue where nat=yes would not always take effect for the RTP session on outgoing calls.
If calls were placed using an IP address or hostname the global nat setting was copied over
but was not set on the RTP session itself. This caused the RTP stack to not perform symmetric RTP
actions.
David Vossel [Thu, 26 Mar 2009 21:07:32 +0000 (21:07 +0000)]
pri loop TestClient/TestServer fails: server SEND DTMF 8
app_test was failing when sending the last DTMF digit, 8, because of the 100ms pause issued after DTMF is sent. During this pause the other side would hang up causing the test to look like it failed. Now the other side waits a second before hanging up.
Avoid destroying the CLI line when moving the cursor backward and trying to autocomplete.
When moving the cursor backward and pressing TAB to autocomplete, a NULL is put
in the line and we are loosing what we have already wrote after the actual
cursor position.
Mark Michelson [Mon, 23 Mar 2009 17:59:28 +0000 (17:59 +0000)]
Fix a memory leak in res_monitor.c
The only way that this leak would occur is if Monitor were started
using the Manager interface and no File: header were given. Discovered
while reviewing the ast_channel_ao2 review request.
David Vossel [Thu, 19 Mar 2009 19:40:07 +0000 (19:40 +0000)]
Cleaning up a few things in detect disconnect patch
Initialized ast_call_feature in detect_disconnect to avoid accessing uninitialized memory. Cleaned up /param tags in features.h. No longer send dynamic features in ast_feature_detect.
David Vossel [Thu, 19 Mar 2009 16:15:16 +0000 (16:15 +0000)]
Allow disconnect feature before a call is bridged
feature.conf has a disconnect option. By default this option is set to '*', but it could be anything. If a user wishes to disconnect a call before the other side answers, only '*' will work, regardless if the disconnect option is set to something else. This is because features are unavailable until bridging takes place. The default disconnect option, '*', was hardcoded in app_dial, which doesn't make any sense from a user perspective since they may expect it to be something different. This patch allows features to be detected from outside of the bridge, but not operated on. In this case, the disconnect feature can be detected before briding and handled outside of features.c.
Mark Michelson [Thu, 19 Mar 2009 16:04:02 +0000 (16:04 +0000)]
Fix an issue where cancelled outgoing SIP calls would erroneously report the device as "in use."
A user was having an issue where if an outgoing SIP call was canceled, the SIP device
would remain in use if we had not received any response to the initial INVITE we sent out.
The SIP device would remain in use until the autocongestion timer was exhausted.
I tracked down the cause of this to be the section of code I am removing here. I asked several
people what the purpose of this code was meant to be, but no one could give me any sort of
answer as to why this was here. The person who was having this issue has been using this patch
for several months and it has stopped the problems they have had.
Jeff Peeler [Wed, 18 Mar 2009 19:57:05 +0000 (19:57 +0000)]
Allow H.323 Plus library to be used in addition to the OpenH323 library
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
Russell Bryant [Wed, 18 Mar 2009 02:09:13 +0000 (02:09 +0000)]
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
Kevin P. Fleming [Wed, 18 Mar 2009 01:55:22 +0000 (01:55 +0000)]
Improve the build system to *properly* remove unnecessary symbols from the runtime global namespace. Along the way, change the prefixes on some internal-only API calls to use a common prefix.
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
Kevin P. Fleming [Wed, 18 Mar 2009 01:28:42 +0000 (01:28 +0000)]
Improve the build system to *properly* remove unnecessary symbols from the runtime global namespace. Along the way, change the prefixes on some internal-only API calls to use a common prefix.
With these changes, for a module to export symbols into the global namespace, it must have *both* the AST_MODFLAG_GLOBAL_SYMBOLS flag and a linker script that allows the linker to leave the symbols exposed in the module's .so file (see res_odbc.exports for an example).
Tilghman Lesher [Tue, 17 Mar 2009 05:50:52 +0000 (05:50 +0000)]
Fix race in astdb
The underlying db1 implementation does not fully isolate the pages retrieved
from astdb, so the lock protecting accesses needs to be extended until the
copy from the shared memory structure is done.
(closes issue #14682)
Reported by: makoto
David Vossel [Mon, 16 Mar 2009 17:47:42 +0000 (17:47 +0000)]
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Tilghman Lesher [Mon, 16 Mar 2009 15:39:15 +0000 (15:39 +0000)]
Fixup glare detection, to fix a memory leak of a local pvt structure.
(closes issue #14656)
Reported by: caspy
Patches:
20090313__bug14656__2.diff.txt uploaded by tilghman (license 14)
Tested by: caspy
Mark Michelson [Fri, 13 Mar 2009 17:12:32 +0000 (17:12 +0000)]
Check the DYNAMIC_FEATURES of both the chan and peer when interpreting DTMF.
Dynamic features defined in the applicationmap section of features.conf allow
one to specify whether the caller, callee, or both have the ability to use the
feature. The documentation in the features.conf.sample file could be interpreted
to mean that one only needs to set the DYNAMIC_FEATURES channel variable on the
calling channel in order to allow for the callee to be able to use the features
which he should have permission to use. However, the DYNAMIC_FEATURES variable
would only be read from the channel of the participant that pressed the DTMF
sequence to activate the feature. The result of this was that the callee was
unable to use dynamic features unless the dialplan writer had taken measures
to be sure that the DYNAMIC_FEATURES variable was set on the callee's channel.
This commit changes the behavior of ast_feature_interpret to concatenate the
values of DYNAMIC_FEATURES from both parties involved in the bridge. The features
themselves determine who has permission to use them, so there is no reason to believe
that one side of the bridge could gain the ability to perform an action that they
should not have the ability to perform.
Kevin Fleming pointed out on the asterisk-users list that the typical way that this
was worked around in the past was by setting _DYNAMIC_FEATURES on the calling channel
so that the value would be inherited by the called channel. While this works, the
documentation alone is not enough to figure out why this is necessary for the callee
to be able to use dynamic features. In this particular case, changing the code to match
the documentation is safe, easy, and will generally make things easier for people for
future installations.
This bug was originally reported on the asterisk-users list by David Ruggles.
Mark Michelson [Thu, 12 Mar 2009 18:29:48 +0000 (18:29 +0000)]
Properly send a 487 on an INVITE we have not responded to if we receive a BYE.
If we receive an INVITE from an endpoint and then later receive a BYE from that
same endpoint before we have sent a final response for the INVITE, then we need
to respond to the INVITE with a 487.
There was logic in the code prior to this commit which seemed to exist solely to
handle this situation, but there was one condition in an if statement which
was incorrect. The only way we would send a 487 was if the sip_pvt had no owner
channel. This made no sense since we created the owner channel when we received
the INVITE, meaning that the majority of the time we would never send the 487.
The 487 being sent should not rely on whether we have created a channel. Its
delivery should be dependent on the current state of the initial INVITE transaction.
With this commit, that logic is now correctly in place.
projects / thirdparty / asterisk.git / log
