Arnd Bergmann [Wed, 9 Dec 2020 19:51:26 +0000 (20:51 +0100)]
Merge tag 'samsung-drivers-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.11, part two
1. Mark PM functions of newly added clkout module as unused to silence
!CONFIG_PM warnings.
2. Initialize ChipID driver later - in arch initcall.
* tag 'samsung-drivers-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
Wendy Liang [Tue, 24 Nov 2020 08:18:18 +0000 (00:18 -0800)]
firmware: xlnx-zynqmp: fix compilation warning
Fix compilation warning when ZYNQMP_FIRMWARE is not defined.
include/linux/firmware/xlnx-zynqmp.h: In function
'zynqmp_pm_get_eemi_ops':
include/linux/firmware/xlnx-zynqmp.h:363:9: error: implicit
declaration of function 'ERR_PTR'
[-Werror=implicit-function-declaration]
363 | return ERR_PTR(-ENODEV);
include/linux/firmware/xlnx-zynqmp.h:363:18: note: each undeclared
identifier is reported only once for each function it appears in
include/linux/firmware/xlnx-zynqmp.h: In function
'zynqmp_pm_get_api_version':
include/linux/firmware/xlnx-zynqmp.h:367:10: error: 'ENODEV'
undeclared (first use in this function)
367 | return -ENODEV;
| ^~~~~~
Michael Tretter [Mon, 9 Nov 2020 13:48:17 +0000 (14:48 +0100)]
soc: xilinx: vcu: use vcu-settings syscon registers
Switch the "logicoreip" registers to the new xlnx,vcu-settings binding
to be able to read the settings if the settings are specified in a
separate device tree node that is shared with other drivers.
If the driver is not able to find a node with the new binding, fall back
to check for the logicore register bank to be backwards compatible.
Michael Tretter [Mon, 9 Nov 2020 13:48:16 +0000 (14:48 +0100)]
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
The xlnx,vcu binding comprises two adjacent register banks:
The first register bank ("vcu_slcr") contains registers for setting the
clocks of the vcu and controlling the performance monitors. The second
bank ("logicoreip") contains the configuration settings of the video codec
unit, which are set before synthesizing the bitstream.
Drivers that drive the actual video codec unit need to read the
registers from the logicoreip register bank for configuring the vcu
firmware.
As logicoreip is a too generic name for this register bank, use
"vcu-settings" as a binding name, because the register bank basically
provides the configuration settings of the VCU.
Therefore, add the vcu-settings binding to provide a syscon interface
for other drivers to read these registers.
The alternative would have been to merge the two register banks of the
xlnx,vcu binding into one register bank and make xlnx,vcu provide a
syscon interface, but that would lead to more incompatibility than
making second register bank of xlnx,vcu optional.
Arnd Bergmann [Tue, 8 Dec 2020 23:29:33 +0000 (00:29 +0100)]
Merge tag 'memory-controller-drv-tegra-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.11 - Tegra SoC, part two
Continuation of work on Tegra SoC memory controllers towards adding
interconnect support and integration with devfreq.
This brings few more patches including one which removes/fixes annoying
warning if the DTS patches get applied. This is expected and only
informs that new features of Tegra memory controller drivers will not be
enabled however the warning itself could look worrying.
* tag 'memory-controller-drv-tegra-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
Arnd Bergmann [Tue, 8 Dec 2020 23:28:39 +0000 (00:28 +0100)]
Merge tag 'memory-controller-drv-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.11, part two
1. Several fixes for Renesas RPC-IF driver.
2. Correct compile testing of TI EMIF SRAM driver.
3. Fix potential NULL pointer in JZ4780 NEMC driver.
* tag 'memory-controller-drv-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: renesas-rpc-if: Make rpcif_enable/disable_rpm() as static inline
memory: renesas-rpc-if: Fix a node reference leak in rpcif_probe()
memory: renesas-rpc-if: Fix unbalanced pm_runtime_enable in rpcif_{enable,disable}_rpm
memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer()
Arnd Bergmann [Tue, 8 Dec 2020 23:26:38 +0000 (00:26 +0100)]
Merge tag 'reset-for-v5.11' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.11
This tag adds support for sharing pulsed resets under certain
conditions. For example, when multiple drivers go through a
suspend-resume cycle, a reset line they share can be triggered
again during resume.
Further, the reset-meson driver now can be built as a module, the
reset-socfpga driver properly releases its memory region in the
probe error path, and reset-ti-syscon driver uses regmap_write_bits()
instead of regmap_update_bits() to support devices without status
readback.
* tag 'reset-for-v5.11' of git://git.pengutronix.de/pza/linux:
reset-controller: ti: force the write operation when assert or deassert
reset: socfpga: add error handling and release mem-region
reset: meson: make it possible to build as a module
reset: make shared pulsed reset controls re-triggerable
Arnd Bergmann [Tue, 8 Dec 2020 23:24:20 +0000 (00:24 +0100)]
Merge tag 'imx-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.11:
- A series from Daniel Baluta to update imx-dsp driver and export
functions for on demand channel request/free.
- A number of patches to add power domains for i.MX8qxp DC0, LVDS1,
MIPI1 and JPEG subsystems.
- Add dummy functions for i.MX firmware drivers to avoid build failure
seen with COMPILE_TEST.
* tag 'imx-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-pd: Add some power domains support for i.MX8qxp MIPI1 subsystem
firmware: imx: scu-pd: Add main power domain support for i.MX8qxp LVDS1 subsystem
firmware: imx: scu-pd: Add video0/1 power domains support for i.MX8qxp DC0 subsystem
firmware: imx-dsp: Export functions to request/free channels
firmware: imx: Save channel name for further use
firmware: imx: Introduce imx_dsp_setup_channels
firmware: imx: scu-pd: Add power domains for imx-jpeg
firmware: imx: add dummy functions
Arnd Bergmann [Tue, 8 Dec 2020 23:23:29 +0000 (00:23 +0100)]
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: driver updates for v5.11
- enable building as modules
- reset API updates
* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: replace devm_reset_control_array_get()
soc: amlogic: canvas: add missing put_device() call in meson_canvas_get()
firmware: meson-sm: enable build as module
soc: meson: enable building drivers as modules
soc: amlogic: socinfo: build for specific arch
Arnd Bergmann [Tue, 8 Dec 2020 23:21:31 +0000 (00:21 +0100)]
Merge tag 'drivers_soc_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
drivers: soc: TI SOC changes for 5.11
- ti_sci changes towards DMSS support
- Static warning fixes
- Kconfig update for Keystone ARM64 socs
- AM64X SOC family support
* tag 'drivers_soc_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: (23 commits)
drivers: soc: ti: knav_qmss_queue: Fix error return code in knav_queue_probe
soc: ti: Fix reference imbalance in knav_dma_probe
soc: ti: pruss: Remove wrong check against *get_match_data return value
soc: ti: Kconfig: Drop ARM64 SoC specific configs
soc: ti: k3-ringacc: Provide documentation for 'k3_ring's 'state'
soc: ti: wkup_m3_ipc: Document 'm3_ipc' parameter throughout
soc: ti: pm33xx: Remove set but unused variable 'ret'
soc: ti: knav_dma: Fix a kernel function doc formatting issue
soc: ti: knav_qmss_queue: Fix a whole host of function documentation issues
soc: ti: knav_qmss_queue: Remove set but unchecked variable 'ret'
soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted
soc: ti: knav_qmss: fix reference leak in knav_queue_probe
soc: ti: k3-socinfo: Add entry for AM64X SoC family
soc: ti: k3-ringacc: Use correct device for allocation in RING mode
firmware: ti_sci: rm: Remove unused config() from ti_sci_rm_ringacc_ops
soc: ti: k3-ringacc: Use the ti_sci set_cfg callback for ring configuration
firmware: ti_sci: rm: Add new ops for ring configuration
firmware: ti_sci: rm: Remove ring_get_config support
firmware: ti_sci: rm: Add support for extended_ch_type for tx channel
soc: ti: ti_sci_inta_msi: Add support for second range in resource ranges
...
Arnd Bergmann [Tue, 8 Dec 2020 23:19:56 +0000 (00:19 +0100)]
Merge tag 'omap-for-v5.11/genpd-drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for omaps for genpd for v5.11 merge window
This series of changes allows booting am335x with genpd and
device tree data without the legacy platform data. Also at
least am437x can be booted with gendp with power domain and
dts data. The SoC specific dts changes will be a separate
pull request.
We need the following driver changes merged before the dts
changes can be done:
- platform code needs a few improvments to probe l4_wkup first
for clocks, and to bail out when there is no platform data
- ti-sysc driver needs a non-urgent fix for asserting rstctrl
reset only after disabling the clocks, to probe modules with
no known control registers, and added quirk handling for gpmc
devices
- omap-prm driver needs a non-urgent fix for reset status bit,
support added for pm_clk, and then we add the rest of am335x
power domain data
- clock driver for am335x needs to keep l3_main clock enabled
with genpd for suspend and resume to work
- wkup_m3 remoteproc driver needs support added for reset
control if available instead of the legacy pdata callbacks
- pm33xx driver needs PM runtime support added for genpd
The am335x specific driver changes for the clock, wkup_m3,
pm33xx and remoteproc drivers are quite trivial and have not
caused merge conflicts in Linux next. I did not get acks for
these changes except from Santosh but had already pushed out
the branch already at that point. So I've added the related
driver maintainers to Cc.
* tag 'omap-for-v5.11/genpd-drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
remoteproc/wkup_m3: Use reset control driver if available
soc: ti: pm33xx: Enable basic PM runtime support for genpd
soc: ti: omap-prm: am3: add genpd support for remaining PRM instances
soc: ti: omap-prm: Add pm_clk for genpd
clk: ti: am33xx: Keep am3 l3 main clock always on for genpd
bus: ti-sysc: Implement GPMC debug quirk to drop platform data
bus: ti-sysc: Support modules without control registers
ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus
ARM: OMAP2+: Check for inited flag
bus: ti-sysc: Assert reset only after disabling clocks
soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Arnd Bergmann [Tue, 8 Dec 2020 23:17:54 +0000 (00:17 +0100)]
Merge tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.11
This adds support for the core power domains on MSM8916, MSM8939, SDM660
and SDX55. It adds SM8150 support to the last-level cache controller
driver and it makes it possible to build the Command DB and RPMh drivers
as modules.
It also contains a slew of smaller cleanups, style and bug fixes
throughout the various drivers.
* tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
soc: qcom: rpmhpd: Add SDX55 power domains
dt-bindings: power: Add rpm power domain bindings for sdx55
soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write()
samples: qmi: Constify static qmi ops
soc: qcom: pdr: Constify static qmi structs
soc: qcom: initialize local variable
soc: qcom: socinfo: add soc ids for msm8953 variants
soc: qcom: geni: Remove "iova" check
soc: qcom: llcc: Add configuration data for SM8150
dt-bindings: msm: Add LLCC for SM8150
soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header
soc: qcom: kryo-l2-accessors: Fix misnaming of 'val'
soc: qcom: rpmhpd: Provide some missing struct member descriptions
soc: qcom: llcc-qcom: Fix expected kernel-doc formatting
soc: qcom: smp2p: Remove unused struct attribute provide another
soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers
soc: qcom: smsm: Fix some kernel-doc formatting and naming problems
soc: qcom: smem: Fix formatting and missing documentation issues
soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr'
soc: qcom: qcom_aoss: Add missing description for 'cooling_devs'
...
Arnd Bergmann [Fri, 4 Dec 2020 09:16:11 +0000 (10:16 +0100)]
clk: samsung: mark PM functions as __maybe_unused
The use of SIMPLE_DEV_PM_OPS() means that the suspend/resume
functions are now unused when CONFIG_PM is disabled:
drivers/clk/samsung/clk-exynos-clkout.c:219:12: error: 'exynos_clkout_resume' defined but not used [-Werror=unused-function]
219 | static int exynos_clkout_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~
drivers/clk/samsung/clk-exynos-clkout.c:210:12: error: 'exynos_clkout_suspend' defined but not used [-Werror=unused-function]
210 | static int exynos_clkout_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
Mark them as __maybe_unused to shut up the otherwise harmless warning.
soc: samsung: exynos-chipid: initialize later - with arch_initcall
The Exynos ChipID driver on Exynos SoCs has only informational
purpose - to expose the SoC device in sysfs. No other drivers
depend on it so there is really no benefit of initializing it early.
Instead, initialize everything with arch_initcall which:
1. Allows to use dev_info() as the SoC bus is present (since
core_initcall),
2. Could speed things up because of execution in a SMP environment
(after bringing up secondary CPUs, unlike early_initcall),
3. Reduces the amount of work to be done early, when the kernel has to
bring up critical devices.
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.
Dmitry Osipenko [Thu, 3 Dec 2020 19:24:32 +0000 (22:24 +0300)]
memory: tegra30: Support interconnect framework
Now Internal and External memory controllers are memory interconnection
providers. This allows us to use interconnect API for tuning of memory
configuration. EMC driver now supports OPPs and DVFS. MC driver now
supports tuning of memory arbitration latency, which needs to be done
for ISO memory clients, like a Display client for example.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Acked-by: Georgi Djakov <georgi.djakov@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201203192439.16177-4-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Dmitry Osipenko [Thu, 3 Dec 2020 19:24:31 +0000 (22:24 +0300)]
memory: tegra20: Support hardware versioning and clean up OPP table initialization
Support hardware versioning, which is now required for Tegra20 EMC OPP.
Clean up OPP table initialization by using a error code returned by OPP
API for judging about the OPP table presence in a device-tree and remove
OPP regulator initialization because we're now going to use power domain
instead of a raw regulator. This puts Tegra20 EMC OPP preparation on par
with the Tegra30/124 EMC drivers.
Document opp-supported-hw property, which is not strictly necessary to
have on Tegra20, but it's very convenient to have because all other SoC
core devices will use hardware versioning, and thus, it's good to maintain
the consistency.
Dinh Nguyen [Mon, 9 Nov 2020 19:21:41 +0000 (13:21 -0600)]
reset: socfpga: add error handling and release mem-region
In case of an error, call release_mem_region when an error happens
during allocation of resources. Also add error handling for the case
that reset_controller_register fails.
Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Yu Kuai [Tue, 17 Nov 2020 01:13:22 +0000 (09:13 +0800)]
soc: amlogic: canvas: add missing put_device() call in meson_canvas_get()
if of_find_device_by_node() succeed, meson_canvas_get() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 382f8be04551 ("soc: amlogic: canvas: Fix meson_canvas_get when probe failed") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201117011322.522477-1-yukuai3@huawei.com
Arnd Bergmann [Mon, 30 Nov 2020 16:19:19 +0000 (17:19 +0100)]
Merge tag 'at91-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/drivers
AT91 drivers for 5.11:
- add sam9x60 SiP IDs
- at91_cf cleanups
* tag 'at91-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
pcmcia: at91_cf: remove platform data support
pcmcia: at91_cf: move definitions locally
ARM: at91: sam9x60 SiP types added to soc description
Lad Prabhakar [Thu, 26 Nov 2020 19:11:42 +0000 (19:11 +0000)]
memory: renesas-rpc-if: Return correct value to the caller of rpcif_manual_xfer()
In the error path of rpcif_manual_xfer() the value of ret is overwritten
by value returned by reset_control_reset() function and thus returning
incorrect value to the caller.
This patch makes sure the correct value is returned to the caller of
rpcif_manual_xfer() by dropping the overwrite of ret in error path.
Also now we ignore the value returned by reset_control_reset() in the
error path and instead print a error message when it fails.
Fixes: ca7d8b980b67f ("memory: add Renesas RPC-IF driver") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Pavel Machek (CIP) <pavel@denx.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201126191146.8753-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Neal Liu [Thu, 15 Oct 2020 03:20:39 +0000 (11:20 +0800)]
soc: mediatek: add mt6779 devapc driver
MediaTek bus fabric provides TrustZone security support and data
protection to prevent slaves from being accessed by unexpected
masters.
The security violation is logged and sent to the processor for
further analysis or countermeasures.
Any occurrence of security violation would raise an interrupt, and
it will be handled by mtk-devapc driver. The violation
information is printed in order to find the murderer.
Chun-Kuang Hu [Mon, 2 Nov 2020 00:04:38 +0000 (08:04 +0800)]
soc / drm: mediatek: cmdq: Remove timeout handler in helper function
For each client driver, its timeout handler need to dump hardware register
or its state machine information, and their way to detect timeout are
also different, so remove timeout handler in helper function and
let client driver implement its own timeout handler.
Arnd Bergmann [Fri, 27 Nov 2020 16:56:09 +0000 (17:56 +0100)]
Merge tag 'tegra-for-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.11-rc1
This contains a couple of warning fixes and a fix for a mostly harmless
bug in the process ID retrieval code.
* tag 'tegra-for-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: Fix index bug in get_process_id
soc: tegra: fuse: speedo-tegra210: Remove a group of set but unused variables
soc: tegra: fuse: speedo-tegra124: Remove some set but unused variables
Arnd Bergmann [Fri, 27 Nov 2020 16:55:09 +0000 (17:55 +0100)]
Merge tag 'renesas-drivers-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers
Renesas driver updates for v5.11 (take two)
- Stop using __raw_*() I/O accessors.
* tag 'renesas-drivers-for-v5.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: rmobile-sysc: Stop using __raw_*() I/O accessors
soc: renesas: rmobile-sysc: Stop using __raw_*() I/O accessors
There is no reason to keep on using the __raw_{read,write}l() I/O
accessors in Renesas ARM driver code. Switch to using the plain
{read,write}l() I/O accessors, to have a chance that this works on
big-endian.
Weiyi Lu [Fri, 30 Oct 2020 11:36:21 +0000 (12:36 +0100)]
soc: mediatek: pm-domains: Add default power off flag
For some power domain, like conn on MT8192, it should be default OFF.
Because the power on/off control relies the function of connectivity chip
and its firmware. And if project choose other chip vendor solution,
those necessary connectivity functions will not provided.
Matthias Brugger [Fri, 30 Oct 2020 11:36:15 +0000 (12:36 +0100)]
soc: mediatek: pm-domains: Allow bus protection to ignore clear ack
In some cases the hardware does not create an acknowledgment of the
bus protection clearing. Add a flag to the bus protection indicating
that a clear event will be ignored.
Matthias Brugger [Fri, 30 Oct 2020 11:36:14 +0000 (12:36 +0100)]
soc: mediatek: pm-domains: Add subsystem clocks
For the bus protection operations, some subsystem clocks need to be enabled
before releasing the protection. This patch identifies the subsystem clocks
by it's name.
Suggested-by: Weiyi Lu <weiyi.lu@mediatek.com>
[Adapted the patch to the mtk-pm-domains driver] Signed-off-by: Matthias Brugger <mbrugger@suse.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20201030113622.201188-9-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Matthias Brugger [Fri, 30 Oct 2020 11:36:13 +0000 (12:36 +0100)]
soc: mediatek: pm-domains: Add extra sram control
For some power domains like vpu_core on MT8183 whose sram need to do clock
and internal isolation while power on/off sram. We add a cap
"MTK_SCPD_SRAM_ISO" to judge if we need to do the extra sram isolation
control or not.
Matthias Brugger [Fri, 30 Oct 2020 11:36:11 +0000 (12:36 +0100)]
soc: mediatek: pm_domains: Make bus protection generic
Bus protection is not exclusively done by calling the infracfg misc driver.
Make the calls for setting and clearing the bus protection generic so
that we can use other blocks for it as well.
The System Control Processor System (SCPSYS) has several power management
related tasks in the system. This driver implements support to handle
the different power domains supported in order to meet high performance
and low power requirements.
dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller
The System Control Processor System (SCPSYS) has several power management
related tasks in the system. Add the bindings to define the power
domains for the SCPSYS power controller.
Arnd Bergmann [Thu, 26 Nov 2020 21:05:15 +0000 (22:05 +0100)]
Merge tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.11 - Tegra SoC
There is a bigger work from Dmitry Osipenko around Tegra SoC memory
controller drivers, mostly towards adding interconnect support and
integration with devfreq. This work touches all Tegra memory controller
drivers and also few other SoC-related parts. It's not yet finished but
the intermediate stage seems ready to merge.
Beside that Tegra 210 memory controller got few fixes and received new
swgroups (work of Nicolin Chen).
* tag 'memory-controller-drv-tegra-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (38 commits)
memory: tegra30-emc: Remove unnecessary of_node_put in tegra_emc_probe
memory: tegra: Complete tegra210_swgroups
memory: tegra30-emc: Continue probing if timings are missing in device-tree
memory: tegra30-emc: Make driver modular
memory: tegra30: Add FIFO sizes to memory clients
memory: tegra20-emc: Add devfreq support
memory: tegra20-emc: Remove IRQ number from error message
memory: tegra20-emc: Factor out clk initialization
memory: tegra20-emc: Use dev_pm_opp_set_clkname()
memory: tegra: Correct stub of devm_tegra_memory_controller_get()
memory: tegra20: Support interconnect framework
memory: tegra20-emc: Continue probing if timings are missing in device-tree
memory: tegra20-emc: Make driver modular
memory: tegra-mc: Add interconnect framework
memory: tegra: Add missing latency allowness entry for Page Table Cache
memory: tegra: Remove superfluous error messages around platform_get_irq()
memory: tegra: Use devm_platform_ioremap_resource()
memory: tegra: Add and use devm_tegra_memory_controller_get()
dt-bindings: host1x: Document new interconnect properties
dt-bindings: tegra30-actmon: Document OPP and interconnect properties
...
Arnd Bergmann [Thu, 26 Nov 2020 21:03:19 +0000 (22:03 +0100)]
Merge tag 'memory-controller-drv-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/drivers
Memory controller drivers for v5.11
1. jz4780_nemc: fix devm_ioremap() return value check leading to
potential NULL pointer dereference.
2. mediatek: Convert bindings to dtschema and add support for mt8192.
3. pl353-smc: Fix compile test.
* tag 'memory-controller-drv-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: pl353-smc: fix compile test on !ARM_AMBA
memory: mtk-smi: Add mt8192 support
dt-bindings: memory: mediatek: Add mt8192 support
dt-bindings: memory: mediatek: Convert SMI to DT schema
MAINTAINERS: add dt binding headers to memory controller drivers entry
memory: jz4780_nemc: Fix an error pointer vs NULL check in probe()
memory: tegra30-emc: Remove unnecessary of_node_put in tegra_emc_probe
Clang warns:
drivers/memory/tegra/tegra30-emc.c:1275:15: warning: variable 'np' is uninitialized when used here [-Wuninitialized]
of_node_put(np);
^~
drivers/memory/tegra/tegra30-emc.c:1269:24: note: initialize the variable 'np' to silence this warning
There does not need to be an of_node_put call in this error handling
block after the shuffling of the np assignment. Remove it so there is
no use of uninitialized memory.
Fixes: 5e00fd90183a ("memory: tegra30-emc: Continue probing if timings are missing in device-tree") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201119195244.1517236-1-natechancellor@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Nicolin Chen [Thu, 8 Oct 2020 00:37:46 +0000 (17:37 -0700)]
memory: tegra: Complete tegra210_swgroups
According to Tegra X1 TRM, there are missing swgroups in the
tegra210_swgroups list. So this patch adds them to the list.
Note that the TEGRA_SWGROUP_GPU (in list) should be actually
TEGRA_SWGROUP_GPUB (in TRM), yet TEGRA_SWGROUP_GPU (in TRM) is not being
used -- only TEGRA_SWGROUP_GPUB (in TRM) is. So this patch does not add
TEGRA_SWGROUP_GPU (in TRM) and keeps TEGRA_SWGROUP_GPU (in list)
as it is.
Dmitry Osipenko [Wed, 11 Nov 2020 01:14:38 +0000 (04:14 +0300)]
memory: tegra30-emc: Continue probing if timings are missing in device-tree
EMC driver will become mandatory after turning it into interconnect
provider because interconnect users, like display controller driver, will
fail to probe using newer device-trees that have interconnect properties.
Thus make EMC driver to probe even if timings are missing in device-tree.
Dmitry Osipenko [Wed, 11 Nov 2020 01:14:34 +0000 (04:14 +0300)]
memory: tegra20-emc: Add devfreq support
Add devfreq support to the Tegra20 EMC driver. Memory utilization
statistics will be periodically polled from the memory controller and
appropriate minimum clock rate will be selected by the devfreq governor.
Dmitry Osipenko [Wed, 4 Nov 2020 16:49:11 +0000 (19:49 +0300)]
memory: tegra20: Support interconnect framework
Now Internal and External Memory Controllers are memory interconnection
providers. This allows us to use interconnect API for tuning of memory
configuration. EMC driver now supports OPPs and DVFS.
Dmitry Osipenko [Wed, 4 Nov 2020 16:49:10 +0000 (19:49 +0300)]
memory: tegra20-emc: Continue probing if timings are missing in device-tree
EMC driver will become mandatory after turning it into interconnect
provider because interconnect users, like display controller driver, will
fail to probe using newer device-trees that have interconnect properties.
Thus make EMC driver to probe even if timings are missing in device-tree.
Dmitry Osipenko [Wed, 4 Nov 2020 16:49:08 +0000 (19:49 +0300)]
memory: tegra-mc: Add interconnect framework
Add common SoC-agnostic ICC framework which turns Tegra Memory Controller
into a memory interconnection provider. This allows us to use interconnect
API for tuning of memory configurations.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> Link: https://lore.kernel.org/r/20201104164923.21238-33-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Add missing PTC memory client latency allowness entry to the Tegra MC
drivers.
This prevents erroneous clearing of MC_INTSTATUS 0x0 register during
of the LA programming in tegra_mc_setup_latency_allowance() due to the
missing entry. Note that this patch doesn't fix any known problems.
Dmitry Osipenko [Wed, 4 Nov 2020 16:49:04 +0000 (19:49 +0300)]
memory: tegra: Add and use devm_tegra_memory_controller_get()
Multiple Tegra drivers need to retrieve Memory Controller and there is
duplication of the retrieval code among the drivers.
Add new devm_tegra_memory_controller_get() helper to remove the code's
duplication and to fix put_device() which was missed in the duplicated
code. Make EMC drivers to use the new helper.
Rikard Falkeborn [Tue, 24 Nov 2020 21:29:54 +0000 (22:29 +0100)]
samples: qmi: Constify static qmi ops
The only usage of qmi_sample_handlers[] and lookup_ops is to pass their
addresses to qmi_handle_init() which accepts const pointers to both
qmi_ops and qmi_msg_handler. Make them const to allow the compiler to
put them in read-only memory.
Maxime Ripard [Tue, 24 Nov 2020 10:35:46 +0000 (11:35 +0100)]
soc: sunxi: Fix compilation of sunxi_mbus
dma_direct_set_offset has been moved from dma-mapping.h to
dma-map-ops.h, but our driver hasn't been updated resulting in a build
breakage. Let's change the header to fix the build.
projects / people / ms / linux.git / log
