Fix ath9k_hw_verify_hang()/ar9003_hw_detect_mac_hang() register offset
calculation (do not overflow the shift for the second register/queues
above five, use the register layout described in the comments above
ath9k_hw_verify_hang() instead).
Currently, while calculating residency and latency values, right
operands may overflow if resulting values are big enough.
To prevent this, albeit unlikely case, play it safe and convert
right operands to left ones' type s64.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 30f604283e05 ("PM / Domains: Allow domain power states to be read from DT") Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When removing a disk with replacement, the replacement will be used to
replace rdev. During this process, there is a brief window in which both
rdev and replacement are read as NULL in raid10_write_request(). This
will result in io not being submitted but it should be.
Fix it by reading replacement first and rdev later, meanwhile, use smp_mb()
to prevent memory reordering.
Fixes: 475b0321a4df ("md/raid10: writes should get directed to replacement as well as original.") Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20230602091839.743798-3-linan666@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no input check when echo md/safe_mode_delay in safe_delay_store().
And msec might also overflow when HZ < 1000 in safe_delay_show(), Fix it by
checking overflow in safe_delay_store() and use unsigned long conversion in
safe_delay_show().
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
gtags considers any file outside of its current working directory
"outside the source tree" and refuses to index it. For O= kernel builds,
or when "make" is invoked from a directory other then the kernel source
tree, gtags ignores the entire kernel source and generates an empty
index.
Force-set gtags current working directory to the kernel source tree.
Due to commit 9da0763bdd82 ("kbuild: Use relative path when building in
a subdir of the source tree"), if the kernel build is done in a
sub-directory of the kernel source tree, the kernel Makefile will set
the kernel's $srctree to ".." for shorter compile-time and run-time
warnings. Consequently, the list of files to be indexed will be in the
"../*" form, rendering all such paths invalid once gtags switches to the
kernel source tree as its current working directory.
If gtags indexing is requested and the build directory is not the kernel
source tree, index all files in absolute-path form.
Note, indexing in absolute-path form will not affect the generated
index, as paths in gtags indices are always relative to the gtags "root
directory" anyway (as evidenced by "gtags --dump").
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de> Cc: <stable@vger.kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Noticed this when trying to compile with -Wall on a kernel fork. We
potentially don't set width here, which causes the compiler to complain
about width potentially being uninitialized in drm_cvt_modes(). So, let's
fix that.
Changes since v1:
* Don't emit an error as this code isn't reachable, just mark it as such
Changes since v2:
* Remove now unused variable
A use-after-free bug may occur if init_imstt invokes framebuffer_release
and free the info ptr. The caller, imsttfb_probe didn't notice that and
still keep the ptr as private data in pdev.
If we remove the driver which will call imsttfb_remove to make cleanup,
UAF happens.
Fix it by return error code if bad case happens in init_imstt.
Monitoring idletask::thread_info::flags in mwait_play_dead() has been an
obvious choice as all what is needed is a cache line which is not written
by other CPUs.
But there is a use case where a "dead" CPU needs to be brought out of
MWAIT: kexec().
This is required as kexec() can overwrite text, pagetables, stacks and the
monitored cacheline of the original kernel. The latter causes MWAIT to
resume execution which obviously causes havoc on the kexec kernel which
results usually in triple faults.
Use a dedicated per CPU storage to prepare for that.
On corrupt gfs2 file systems the evict code can try to reference the
journal descriptor structure, jdesc, after it has been freed and set to
NULL. The sequence of events is:
init_journal()
...
fail_jindex:
gfs2_jindex_free(sdp); <------frees journals, sets jdesc = NULL
if (gfs2_holder_initialized(&ji_gh))
gfs2_glock_dq_uninit(&ji_gh);
fail:
iput(sdp->sd_jindex); <--references jdesc in evict_linked_inode
evict()
gfs2_evict_inode()
evict_linked_inode()
ret = gfs2_trans_begin(sdp, 0, sdp->sd_jdesc->jd_blocks);
<------references the now freed/zeroed sd_jdesc pointer.
The call to gfs2_trans_begin is done because the truncate_inode_pages
call can cause gfs2 events that require a transaction, such as removing
journaled data (jdata) blocks from the journal.
This patch fixes the problem by adding a check for sdp->sd_jdesc to
function gfs2_evict_inode. In theory, this should only happen to corrupt
gfs2 file systems, when gfs2 detects the problem, reports it, then tries
to evict all the system inodes it has read in up to that point.
Reported-by: Yang Lan <lanyang0908@gmail.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[DP: adjusted context] Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the way the GDS and SRSO patches flowed into the stable tree, it
was a 50% chance that the merge of the which value GDS and SRSO should
be. Of course, I lost that bet, and chose the opposite of what Linus
chose in commit 64094e7e3118 ("Merge tag 'gds-for-linus-2023-08-01' of
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip")
Fix this up by switching the values to match what is now in Linus's tree
as that is the correct value to mirror.
It is possible that a guest can send a packet that contains a head + 18
slots and yet has a len <= XEN_NETBACK_TX_COPY_LEN. This causes nr_slots
to underflow in xenvif_get_requests() which then causes the subsequent
loop's termination condition to be wrong, causing a buffer overrun of
queue->tx_map_ops.
Rework the code to account for the extra frag_overflow slots.
This is CVE-2023-34319 / XSA-432.
Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gather Data Sampling (GDS) is a transient execution attack using
gather instructions from the AVX2 and AVX512 extensions. This attack
allows malicious code to infer data that was previously stored in
vector registers. Systems that are not vulnerable to GDS will set the
GDS_NO bit of the IA32_ARCH_CAPABILITIES MSR. This is useful for VM
guests that may think they are on vulnerable systems that are, in
fact, not affected. Guests that are running on affected hosts where
the mitigation is enabled are protected as if they were running
on an unaffected system.
On all hosts that are not affected or that are mitigated, set the
GDS_NO bit.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gather Data Sampling (GDS) is mitigated in microcode. However, on
systems that haven't received the updated microcode, disabling AVX
can act as a mitigation. Add a Kconfig option that uses the microcode
mitigation if available and disables AVX otherwise. Setting this
option has no effect on systems not affected by GDS. This is the
equivalent of setting gather_data_sampling=force.
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Gather Data Sampling (GDS) vulnerability allows malicious software
to infer stale data previously stored in vector registers. This may
include sensitive data such as cryptographic keys. GDS is mitigated in
microcode, and systems with up-to-date microcode are protected by
default. However, any affected system that is running with older
microcode will still be vulnerable to GDS attacks.
Since the gather instructions used by the attacker are part of the
AVX2 and AVX512 extensions, disabling these extensions prevents gather
instructions from being executed, thereby mitigating the system from
GDS. Disabling AVX2 is sufficient, but we don't have the granularity
to do this. The XCR0[2] disables AVX, with no option to just disable
AVX2.
Add a kernel parameter gather_data_sampling=force that will enable the
microcode mitigation if available, otherwise it will disable AVX on
affected systems.
This option will be ignored if cmdline mitigations=off.
This is a *big* hammer. It is known to break buggy userspace that
uses incomplete, buggy AVX enumeration. Unfortunately, such userspace
does exist in the wild:
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
Initializing the FPU during the early boot process is a pointless
exercise. Early boot is convoluted and fragile enough.
Nothing requires that the FPU is set up early. It has to be initialized
before fork_init() because the task_struct size depends on the FPU register
buffer size.
Move the initialization to arch_cpu_finalize_init() which is the perfect
place to do so.
No functional change.
This allows to remove quite some of the custom early command line parsing,
but that's subject to the next installment.
X86 is reworking the boot process so that initializations which are not
required during early boot can be moved into the late boot process and out
of the fragile and restricted initial boot phase.
arch_cpu_finalize_init() is the obvious place to do such initializations,
but arch_cpu_finalize_init() is invoked too late in start_kernel() e.g. for
initializing the FPU completely. fork_init() requires that the FPU is
initialized as the size of task_struct on X86 depends on the size of the
required FPU register buffer.
Fortunately none of the init calls between calibrate_delay() and
arch_cpu_finalize_init() is relevant for the functionality of
arch_cpu_finalize_init().
Invoke it right after calibrate_delay() where everything which is relevant
for arch_cpu_finalize_init() has been set up already.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com> Link: https://lore.kernel.org/r/20230613224545.612182854@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
check_bugs() has become a dumping ground for all sorts of activities to
finalize the CPU initialization before running the rest of the init code.
Most are empty, a few do actual bug checks, some do alternative patching
and some cobble a CPU advertisement string together....
Aside of that the current implementation requires duplicated function
declaration and mostly empty header files for them.
Provide a new function arch_cpu_finalize_init(). Provide a generic
declaration if CONFIG_ARCH_HAS_CPU_FINALIZE_INIT is selected and a stub
inline otherwise.
This requires a temporary #ifdef in start_kernel() which will be removed
along with check_bugs() once the architectures are converted over.
Claim clkhi and clklo as integer type to avoid possible calculation
errors caused by data overflow.
Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver") Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> Signed-off-by: Carlos Song <carlos.song@nxp.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When booting with "intremap=off" and "x2apic_phys" on the kernel command
line, the physical x2APIC driver ends up being used even when x2APIC
mode is disabled ("intremap=off" disables x2APIC mode). This happens
because the first compound condition check in x2apic_phys_probe() is
false due to x2apic_mode == 0 and so the following one returns true
after default_acpi_madt_oem_check() having already selected the physical
x2APIC driver.
Userspace can race to free the gobj(robj converted from), robj should not
be accessed again after drm_gem_object_put, otherwith it will result in
use-after-free.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If it is async, runqueue_node is freed in g2d_runqueue_worker on another
worker thread. So in extreme cases, if g2d_runqueue_worker runs first, and
then executes the following if statement, there will be use-after-free.
Signed-off-by: Min Li <lm0963hack@gmail.com> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a wrong error return by dropping an error return.
When vidi driver is remvoed, if ctx->raw_edid isn't same as fake_edid_info
then only what we have to is to free ctx->raw_edid so that driver removing
can work correctly - it's not an error case.
Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes the error checking in nfcsim.c.
The DebugFS kernel API is developed in
a way that the caller can safely ignore the errors that
occur during the creation of DebugFS nodes.
Signed-off-by: Osama Muhammad <osmtendev@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tpg->np_login_sem is a semaphore that is used to serialize the login
process when multiple login threads run concurrently against the same
target portal group.
The iscsi_target_locate_portal() function finds the tpg, calls
iscsit_access_np() against the np_login_sem semaphore and saves the tpg
pointer in conn->tpg;
If iscsi_target_locate_portal() fails, the caller will check for the
conn->tpg pointer and, if it's not NULL, then it will assume that
iscsi_target_locate_portal() called iscsit_access_np() on the semaphore.
Make sure that conn->tpg gets initialized only if iscsit_access_np() was
successful, otherwise iscsit_deaccess_np() may end up being called against
a semaphore we never took, allowing more than one thread to access the same
tpg.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Anonymous sets come with NFT_SET_CONSTANT from userspace. Although API
allows to create anonymous sets without NFT_SET_CONSTANT, it makes no
sense to allow to add and to delete elements for bound anonymous sets.
We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.
The NIC in question identifies itself as follows:
[ 8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[ 8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1
The driver overrides the error codes returned by platform_get_irq_byname()
to -ENODEV, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating error
codes upstream.
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver will fail the probe
permanently instead of the deferred probing. Switch to propagating the
error codes upstream.
In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.
esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.
It is not affected with INET_ESP_OFFLOAD disabled.
Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.
Fixes: 7785bba299a8d ("esp: Add a software GRO codepath") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In a syzbot stress test that deliberately causes file system errors on
nilfs2 with a corrupted disk image, it has been reported that
nilfs_clear_dirty_page() called from nilfs_clear_dirty_pages() can cause a
general protection fault.
In nilfs_clear_dirty_pages(), when looking up dirty pages from the page
cache and calling nilfs_clear_dirty_page() for each dirty page/folio
retrieved, the back reference from the argument page to "mapping" may have
been changed to NULL (and possibly others). It is necessary to check this
after locking the page/folio.
So, fix this issue by not calling nilfs_clear_dirty_page() on a page/folio
after locking it in nilfs_clear_dirty_pages() if the back reference
"mapping" from the page/folio is different from the "mapping" that held
the page/folio just before.
Inside css_task_iter_start/next/end, css_set_lock is hold and then
released, so when iterating task(left side), the css_set may be moved to
another list(right side), then it->cset_head points to the old list head
and it->cset_pos->next points to the head node of new list, which can't
be used as struct css_set.
To fix this issue, switch from all css_sets to only scgrp's css_sets to
patch in-flight iterators to preserve correct iteration, and then
update it->cset_head as well.
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes: cd95aad55793 ("Drivers: hv: vmbus: handle various crash scenarios") Cc: stable@vger.kernel.org Reported-by: John Starks <jostarks@microsoft.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/1684422832-38476-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write. This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others. As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB. In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying. So fix these potential
issues as well.
The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.
This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.
Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses. To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.
Currently, the error interrupt is never acknowledged, so once active it
will stay active indefinitely, causing the handler to be called in an
infinite loop.
Fixes: 2f0fc4159a6a ("SERIAL: Lantiq: Add driver for MIPS Lantiq SOCs.") Cc: <stable@vger.kernel.org> Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Message-ID: <20230602133029.546-1-mail@bernhard-seibold.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Requests to the mmc layer usually come through a block device IO.
The exceptions are the ioctl interface, RPMB chardev ioctl
and debugfs, which issue their own blk_mq requests through
blk_execute_rq and do not query the BLK_STS error but the
mmcblk-internal drv_op_result. This patch ensures that drv_op_result
defaults to an error and has to be overwritten by the operation
to be considered successful.
The behavior leads to a bug where the request never propagates
the error, e.g. by directly erroring out at mmc_blk_mq_issue_rq if
mmc_blk_part_switch fails. The ioctl caller of the rpmb chardev then
can never see an error (BLK_STS_IOERR, but drv_op_result is unchanged)
and thus may assume that their call executed successfully when it did not.
While always checking the blk_execute_rq return value would be
advised, let's eliminate the error by always setting
drv_op_result as -EIO to be overwritten on success (or other error)
Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests") Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/59c17ada35664b818b7bd83752119b2d@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our logic for choosing defconfig doesn't work well in some situations.
For example if you're on a ppc64le machine but you specify a non-empty
CROSS_COMPILE, in order to use a non-default toolchain, then defconfig
will give you ppc64_defconfig (big endian):
$ make CROSS_COMPILE=~/toolchains/gcc-8/bin/powerpc-linux- defconfig
*** Default configuration is based on 'ppc64_defconfig'
This is because we assume that CROSS_COMPILE being set means we
can't be on a ppc machine and rather than checking we just default to
ppc64_defconfig.
We should just ignore CROSS_COMPILE, instead check the machine with
uname and if it's one of ppc, ppc64 or ppc64le then use that
defconfig. If it's none of those then we fall back to ppc64_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Alyssa Ross <hi@alyssa.is> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.
Fixes: 1202cdd66531 ("Remove DECnet support from kernel") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.
This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.
Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program") Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility") Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings") Signed-off-by: Alex Maftei <alex.maftei@amd.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to nla_parse_nested_deprecated(), the tb[] is supposed to the
destination array with maxtype+1 elements. In current
tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used
which is unnecessary. This patch resize them to a proper size.
Fixes: 1e55417d8fc6 ("tipc: add media set to new netlink api") Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
The sctp_sf_eat_auth() function is supposed to enum sctp_disposition
values and returning a kernel error code will cause issues in the
caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM.
Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ib_isert module is releasing the isert connection both in
isert_wait_conn() handler as well as isert_free_conn() handler.
In isert_wait_conn() handler, it is expected to wait for iSCSI
session logout operation to complete. It should free the isert
connection only in isert_free_conn() handler.
When a bunch of iSER target is cleared, this issue can lead to
use-after-free memory issue as isert conn is twice released
When ib_isert module receives connection error event, it is
releasing the isert session and removes corresponding list
node but it doesn't take appropriate mutex lock to remove
the list node. This can lead to linked list corruption
- When a iSER session is released, ib_isert module is taking a mutex
lock and releasing all pending connections. As part of this, ib_isert
is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending
CM events to CMA handler of ib_isert. This handler is taking same
mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm
modules.
- For fix, created local list of pending connections and release the
connection outside of mutex lock.
Ping sockets can't send packets when they're bound to a VRF master
device and the output interface is set to a slave device.
For example, when net.ipv4.ping_group_range is properly set, so that
ping6 can use ping sockets, the following kind of commands fails:
$ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1
What happens is that sk->sk_bound_dev_if is set to the VRF master
device, but 'oif' is set to the real output device. Since both are set
but different, ping_v6_sendmsg() sees their value as inconsistent and
fails.
Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if.
This fixes the following kselftest failure:
$ ./fcnal-test.sh -t ipv6_ping
[...]
TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL]
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: David Ahern <dsahern@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().
It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.
This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge. However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.
The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.
Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.
A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.
This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.
Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().
The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.
When changing a file size with fallocate() the new size isn't being
checked. In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail. Simply adding a call to inode_newsize_ok() fixes
this issue.
Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.de Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Mark Fasheh <mark@fasheh.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452. After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info(). When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
<TASK>
...
timer_delete+0x54/0xc0
try_to_grab_pending+0x31/0x230
__cancel_work_timer+0x6c/0x270
ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
generic_shutdown_super+0xaa/0x280
kill_block_super+0x46/0x70
deactivate_locked_super+0x4d/0xb0
cleanup_mnt+0x135/0x1f0
...
</TASK>
Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.de Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing code silently converts read operations with the
REQ_FUA bit set into write-barrier operations. This results in data
loss as the backend scribbles zeroes over the data instead of returning
it.
While the REQ_FUA bit doesn't make sense on a read operation, at least
one well-known out-of-tree kernel module does set it and since it
results in data loss, let's be safe here and only look at REQ_FUA for
writes.
PAGE_OFFSET is technically a virtual address so when checking the value of
initrd_start against it we should make sure that it has been sanitised from
the values passed by the bootloader. Without this change, even with a bootloader
that passes correct addresses for an initrd, we are failing to load it on MT7621
boards, for example.
Various fixes for the Au1200/Au1550/Au1300 DBDMA2 code:
- skip cache invalidation if chip has working coherency circuitry.
- invalidate KSEG0-portion of the (physical) data address.
- force the dma channel doorbell write out to bus immediately with
a sync.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The logic used for power_supply_is_system_supplied() counts all power
supplies and assumes that the system is running from AC if there is
either a non-battery power-supply reporting to be online or if no
power-supplies exist at all.
The second rule is for desktop systems, that don't have any
battery/charger devices. These systems will incorrectly report to be
powered from battery once a device scope power-supply is registered
(e.g. a HID device), since these power-supplies increase the counter.
Apart from HID devices, recent dGPUs provide UCSI power supplies on a
desktop systems. The dGPU by default doesn't have anything plugged in so
it's 'offline'. This makes power_supply_is_system_supplied() return 0
with a count of 1 meaning all drivers that use this get a wrong judgement.
To fix this case adjust the logic to also examine the scope of the power
supply. If the power supply is deemed a device power supply, then don't
count it.
Cc: Evan Quan <Evan.Quan@amd.com> Suggested-by: Lijo Lazar <Lijo.Lazar@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reduce the amount of output this dev_dbg() statement emits into logs,
otherwise if system software polls the sysfs entry for data and keeps
getting -ENODATA, it could end up filling the logs up.
This does in fact make systemd journald choke, since during boot the
sysfs power supply entries are polled and if journald starts at the
same time, the journal is just being repeatedly filled up, and the
system stops on trying to start journald without booting any further.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use mod_delayed_work() instead of separate cancel_delayed_work_sync() +
schedule_delayed_work() calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As soon as devm_power_supply_register() has called device_add()
the external_power_changed callback can get called. So there is a window
where ab8500_btemp_external_power_changed() may get called while
di->btemp_psy has not been set yet leading to a NULL pointer dereference.
Fixing this is easy. The external_power_changed callback gets passed
the power_supply which will eventually get stored in di->btemp_psy,
so ab8500_btemp_external_power_changed() can simply directly use
the passed in psy argument which is always valid.
And the same applies to ab8500_fg_external_power_changed().
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben reports that this should not have been backported to the older
kernels as the rest of the macro is not empty. It was a clean-up patch
in 6.4-rc1 only, it did not add new device ids.
projects / thirdparty / kernel / stable.git / log
