Ovidiu Panait [Mon, 27 Oct 2025 14:06:51 +0000 (14:06 +0000)]
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add NMI pushbutton support
RZ/V2H EVK has a user pushbutton connected to the SoC NMI pin, which
can be used to wake up the system from suspend to idle. Add a DT node
in the device tree to instantiate the gpio-keys driver for this button.
Ovidiu Panait [Mon, 20 Oct 2025 14:31:07 +0000 (14:31 +0000)]
arm64: dts: renesas: r9a09g057: Add TSU nodes
The Renesas RZ/V2H SoC includes a Thermal Sensor Unit (TSU) block designed
to measure the junction temperature. The device provides real-time
temperature measurements for thermal management, utilizing two dedicated
channels for temperature sensing:
- TSU0, which is located near the DRP-AI block
- TSU1, which is located near the CPU and DRP-AI block
Since TSU1 is physically closer the CPU and the highest temperature
spot, it is used for CPU throttling through a passive trip and cooling
map. TSU0 is configured only with a critical trip.
Add TSU nodes along with thermal zones and keep them enabled in the SoC
DTSI.
The ADC available in the r9a06g032 SoC can use up to two internal ADC
cores (ADC1 and ADC2) those internal cores are handled through ADC
controller virtual channels.
Lad Prabhakar [Tue, 28 Oct 2025 17:54:57 +0000 (17:54 +0000)]
arm64: dts: renesas: r9a09g087: Add GMAC nodes
Add Ethernet MAC (GMAC) device nodes to the RZ/N2H (R9A09G087) SoC DTSI.
The RZ/N2H integrates three GMAC interfaces based on the Synopsys
DesignWare MAC (version 5.20).
Lad Prabhakar [Tue, 28 Oct 2025 17:54:56 +0000 (17:54 +0000)]
arm64: dts: renesas: r9a09g077: Add GMAC nodes
Add Ethernet MAC (GMAC) device nodes to the RZ/T2H (R9A09G077) SoC DTSI.
The RZ/T2H integrates three GMAC interfaces based on the Synopsys
DesignWare MAC (version 5.20).
Lad Prabhakar [Tue, 28 Oct 2025 17:54:55 +0000 (17:54 +0000)]
arm64: dts: renesas: r9a09g087: Add ETHSS node
Add an Ethernet Switch Subsystem (ETHSS) device node to the RZ/N2H
(R9A09G087) SoC. The ETHSS IP block is responsible for handling MII
pass-through or conversion to RMII/RGMII.
Lad Prabhakar [Tue, 28 Oct 2025 17:54:54 +0000 (17:54 +0000)]
arm64: dts: renesas: r9a09g077: Add ETHSS node
Add an Ethernet Switch Subsystem (ETHSS) device node to the RZ/T2H
(R9A09G077) SoC. The ETHSS IP block is responsible for handling MII
pass-through or conversion to RMII/RGMII.
Marek Vasut [Mon, 27 Oct 2025 18:45:53 +0000 (19:45 +0100)]
arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name and labels
The DisplayPort connector on Retronix R-Car V4H Sparrow Hawk board
is a full-size DisplayPort connector. Fix the copy-paste error and
update the DT node name and labels accordingly. No functional change.
Wolfram Sang [Tue, 7 Oct 2025 10:46:25 +0000 (12:46 +0200)]
ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties
The 'ethernet-ports' node in the SoC DTSI handles them already. Fixes:
arch/arm/boot/dts/renesas/r9a06g032-rzn1d400-db.dtb: switch@44050000 (renesas,r9a06g032-a5psw): Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)
from schema $id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
Use the more modern adi,adv7180cp compatible for the CVBS input found on
R-Car Gen2 Koelsch boards. This aligns the bindings with the other Gen2
board with the same setup Gose.
ARM: dts: renesas: r8a7794: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7793: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7792: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7791: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7790: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a77470: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7745: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7744: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7743: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r8a7742: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
ARM: dts: renesas: r7s72100: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
Wolfram Sang [Mon, 29 Sep 2025 09:36:02 +0000 (11:36 +0200)]
ARM: dts: renesas: gose: Remove superfluous port property
'bus-width' is defined for the corresponding vin input port already.
No need to declare it in the output port again. Fixes:
arch/arm/boot/dts/renesas/r8a7793-gose.dtb: composite-in@20 (adi,adv7180cp): ports:port@3:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
Wolfram Sang [Thu, 25 Sep 2025 09:39:51 +0000 (11:39 +0200)]
arm64: dts: renesas: eagle/v3msk: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
V3M boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:50 +0000 (11:39 +0200)]
arm64: dts: renesas: ebisu: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
Ebisu boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:49 +0000 (11:39 +0200)]
arm64: dts: renesas: draak: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
Draak boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:48 +0000 (11:39 +0200)]
arm64: dts: renesas: ulcb: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
ULCB boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
Wolfram Sang [Thu, 25 Sep 2025 09:39:47 +0000 (11:39 +0200)]
arm64: dts: renesas: salvator-common: Mark SWDT as reserved
This watchdog can't be used with Linux because the firmware needs it on
Salvator boards. Sadly, it doesn't mark the node as reserved, so this is
added manually here.
arm64: dts: renesas: r9a09g087: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g077: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g057: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g056: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g047: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a09g011: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a08g045: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a07g054: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a07g044: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r9a07g043u: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779h0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779g0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779f0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a779a0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77995: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77990: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77980: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77970: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77965: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77961: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77960: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a77951: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774e1: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774c0: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774b1: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
arm64: dts: renesas: r8a774a1: Move interrupt-parent to root node
Move the "interrupt-parent = <&gic>" property from the soc node to the
root node, and simplify "interrupts-extended = <&gic ...>" to
"interrupts = <...>".
'#sound-dai-cells' is not mentioned in the encoder bindings doc, so
dtbs_check rightfully complains. Remove the property.
.../renesas-v8/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dtb: hdmi@39 (adi,adv7511w): '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7511.yaml#
Marek Vasut [Thu, 4 Sep 2025 20:28:06 +0000 (22:28 +0200)]
arm64: dts: renesas: sparrow-hawk: Add overlay for RPi Display 2
Add a DT overlay to bind the Raspberry Pi Display 2 (both 5" and 7"
variants), on the Retronix R-Car V4H Sparrow Hawk board. All of display
output, touch controller, and backlight control have been tested.
Laurent Pinchart [Tue, 12 Aug 2025 21:46:20 +0000 (00:46 +0300)]
arm64: dts: renesas: rzg2l-smarc: Drop clock-frequency from camera sensor node
The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. As the clock
source for the sensor is a fixed-frequency oscillator, simply drop the
clock-frequency.
Laurent Pinchart [Tue, 12 Aug 2025 21:46:19 +0000 (00:46 +0300)]
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Drop clock-frequency from camera sensor node
The clock-frequency for camera sensors has been deprecated in favour of
the assigned-clocks and assigned-clock-rates properties. As the clock
source for the sensor is a fixed-frequency oscillator, simply drop the
clock-frequency.
Claudiu Beznea [Sun, 10 Aug 2025 12:21:24 +0000 (15:21 +0300)]
arm64: dts: renesas: r9a08g045: Add TSU node
Add TSU node along with thermal zones and keep it enabled in the SoC DTSI.
The temperature reported by the TSU can only be read through channel 8 of
the ADC. Therefore, enable the ADC by default.
Linus Torvalds [Sun, 12 Oct 2025 20:27:56 +0000 (13:27 -0700)]
Merge tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"One revert because of a regression in the I2C core which has sadly not
showed up during its time in -next"
* tag 'i2c-for-6.18-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: boardinfo: Annotate code used in init phase only"
Linus Torvalds [Sun, 12 Oct 2025 15:45:52 +0000 (08:45 -0700)]
Merge tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Skip interrupt ID 0 in sifive-plic during suspend/resume because
ID 0 is reserved and accessing reserved register space could result
in undefined behavior
- Fix a function's retval check in aspeed-scu-ic
* tag 'irq_urgent_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Avoid interrupt ID 0 handling during suspend/resume
irqchip/aspeed-scu-ic: Fix an IS_ERR() vs NULL check
Linus Torvalds [Sat, 11 Oct 2025 23:06:04 +0000 (16:06 -0700)]
Merge tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
Linus Torvalds [Sat, 11 Oct 2025 22:47:12 +0000 (15:47 -0700)]
Merge tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Fix UAPI types check in headers_check.pl
- Only enable -Werror for hostprogs with CONFIG_WERROR / W=e
- Ignore fsync() error when output of gen_init_cpio is a pipe
- Several little build fixes for recent modules.builtin.modinfo series
* tag 'kbuild-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Use '--strip-unneeded-symbol' for removing module device table symbols
s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections
kbuild: Add '.rel.*' strip pattern for vmlinux
kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux
gen_init_cpio: Ignore fsync() returning EINVAL on pipes
scripts/Makefile.extrawarn: Respect CONFIG_WERROR / W=e for hostprogs
kbuild: uapi: Strip comments before size type check
projects / thirdparty / kernel / linux.git / log
